Firewire camera not found in MAX on Windows 7

Hi all,
Used to run a firewire camera on Windows XP with no problems. Using version 8.6 and do not want to change this if at all possible. New lab PC runs windows 7 and firewire camera not found in NI MAX. The drivers associated with the camera are NI-IMAQdx IIDC...
NI-MAX does not even show a NI-IMAQdx camera and there is no way to add such a camera. The same issue arises for an AVT Guppy camera suggesting it is not camera dependent.
Has anyone any suggestions as how to rectify this. We have full development software v8.6 with all the appropriate drivers and modules required as it previously ran problem free on an XP machine.
Cheers,
leeser

Hi Leeser,
Which version of the driver did you previously have installed under Windows XP? It would be worth trying to re-install the latest version of the NI-IMAQdx driver. You will be able to install the Vision Acquisition Software 08.2010, which works with LabVIEW 8.5 and later (and installs NI-IMAQdx 3.7).
Regards,
Imtiaz Chowdhury
Head of Digital Technologies
Brand786

Similar Messages

I just recently upgraded to the new itunes and getting this, ADAdPolicyEngine_DidEnterStation, could not be located in the dynamic link library C:|programsFiles(x86|itunes.dll, itunes.exe Entry point not found itunes Error 7 windows 127

I just recently upgraded to the new itunes and getting this, ADAdPolicyEngine_DidEnterStation, could not be located in the dynamic link library C:|programsFiles(x86|itunes.dll, itunes.exe Entry point not found itunes Error 7 windows errors127

See iTunes launch errors caused by iAdCore.dll.
Review the rest of the user tip if required.
tt2

Getting error while using CAN api's. Says channel not found in MAX.

Hi,
I am using NI-CAN series2, can card. The same is not connected to my system. Hence i have used the virtual channel 256. Here i am reading the DBC file and providing an option to the user to select a set of messages to transmitt\receive. But i am getting an error saying
"Error -1074388479 occurred at CAN Get Channel Data Type.vi
Possible reason(s):
NI-CAN: (Hex 0xBFF62201) Channel not found in MAX or the CAN database file. Solutions: Check for proper spelling using MAX; For Get/Set Property, ensure that the channel name exists in the task."
Please help.
Regards,
Yogesh

Hi Marshall,
Thanx for the reply and spending time for the same. I tried the example which u had mentioned. This example is working with 256 virtual channel. But my code is no executing and giving he same problem even after loading the DBC file into max(Same loaded im my code). Always load the dbc file in max and then only i should run the code, is it so? But this can not happen, since the user may not hav max. I hav attached the code. Pls verify it, and give me the feedback.
Waiting for the reply,
Yogesh
GET
Larsen & Toubro
India
Attachments:
CanMsgFrame.vi ‏68 KB

My photoshop cc doesn't work. "_crtCreateSymbolicLinkW not found in DLL "C.\Windows\SYSTEM32\MSVCP110.dll"". Please help

my photoshop cc doesn't work. "_crtCreateSymbolicLinkW not found in DLL "C.\Windows\SYSTEM32\MSVCP110.dll"". Please help

I checked my windows 7 pro machine for the module I see many copies if the DLL with different dates two different sizes all are version 11.0.51106.1 so I guess there are 32bit and 64bit versions. Some are in Adobe folders some in Wacom folders ad in two windows folders including system32. I do not know if there is and entry point "_crtCreateSymbolicLinkW" in it.

TS3212 I had to re download Itunes, i get 2 errors; "failed to start MSVCR80.dll not found" and "error 7, windows error 126"

iTunes will now download because of 2 errors; "failed to start MSVCR80.dll not found" and "error 7, windows error 126" using microsoft.

Click here and follow the instructions.
(98918)

HT1926 Trying to install iTunes for Windows Vista. Says "successfully installed," but when I try to open iTunes I get error messages, "unable to locate component, AVFoundationCF.dll not found," then "Error 7 (Windows error 126)

Trying to install iTunes for Windows Vista. Says "successfully installed," but when I try to open iTunes, I get error messages, "unable to locate componant AVFoundationCF.dll not found," then "Error 7 Windows error 126." I have tryed to reinstall twice with the same result.

Repair Apple Application Support.
START/CONTROL PANEL/PROGRAMS N FEATURES/highlight APPLE APPLICATION SUPPORT, then click the REPAIR button

How do i solve the following problem. By starting up the message appears: could not found CoreFoundation.dll. Windows error 7

By starting up the following message appaers: could not found CoreFoundation.dll.
Windows Error 7
How can I solve this problem?

With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Restart the programme all should be well
In case that your OS is (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "SQLite3.dll"
3. Now paste it in the folder C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Restart the programme, it should not display that message, it should be clear.
Good Luck

Hello, just wondering how i can fix my itunes when i keep getting these msges, MSVCR80.dll was not found and error 7 (windows error 126). can anybody help. cheers.

hello, just wondering how i can fix my itunes when i keep getting these msges, MSVCR80.dll was not found and error 7 (windows error 126). can anybody help. cheers.

See Troubleshooting issues with iTunes for Windows updates.
tt2

PCI-7344 not found in MAX 3.1.1 after installing NI-Motion 7.0

Hi,
I updated my PCI-7344 + LabView 7.0 system with the newest NI-Motion 7.0. After the update the card was not anymore detected in MAX. There was a "broken" device PCI-7344 under NI Motion Devices, which status said something like "This device has been removed or could not be detected" and the Reset command said something like "Could not communicate with the device. Power cycle the computer..". I removed the device from the "Devices and interfaces" list and since that, MAX hasn't had a clue about the card. I've tried the "Create new.." function, but it doesn't show any NI Motion Devices or PCI-7344 anywhere else. I've also tried the Tools/Install legacy driver support, but MAX only notifies that the updates are OK. I've also tried removing the physical device, starting the computer and MAX, reinstalling the device and restarting MAX, but nothing changes. The device is recognised by BIOS as "Unknown device"; in Windows 2000 Pro, the device is well recognised as National Instruments PCI-7344.
One thing that could cause the problem is that I also have LabView 6i installed on the system, although I'm not currently using it for any purpose. Anyway, this seems to prevent the MAX from detecting the correct updates needed when using the "National Instruments Product Updates.." from Tools menu. Perhaps I need some driver software to correct this problem?
I also tried to uninstall the NI-Motion 7.0 and to install the NI-Motion 6.1.5, but after this, the MAX did not work correctly. For example, none of the branches in the configuration tree would expand and the MAX locked up when trying to use the Create New.. / NI Motion Device. Is there a way to uninstall the NI-Motion 7.0 and to replace it with NI-Motion 6.1.5 without removing all NI software from the system?
Before the update, with NI-Motion 6.1.5, the PCI-7344 card was correctly found in MAX and well usable in LabView 7.0.

Jouni,
A valid serial number is any number > 0. If you have multiple boards in you system, they must each have a unique serial number. This would be the case for any board coming out of manufacturing. The board Jochen had probably came from R&D and was a prototype board.
Your problem with downgrading from NI-Motion 7.0 to NI-Motion 6.1.5 was most likely due to the data stored in the MAX database. When you uninstall NI-Motion, the data in the MAX database remains. The NI-Motion 6.1.5 driver would not have been able to read the data correctly. The easiest way to "clear" this database is to delete the c:\Program Files\National Instruments\MAX\data folder. The only other way is to uninstall MAX, which requires that you uninstall everything. WARNING, Deleting the MAX data folder will delete all MAX settings and set them back to defaults for all NI hardware (uninstalling everything has this same affect, by the way). Downgrading is never as clean as upgrading.
The firmware on a Motion board can always be downgraded by forcing the download of firmware files. To do this, select the board in MAX under Devices and Interfaces. Click on the Firmware tab at the bottom on the window. Highlight "PCI-73XX Firmware" by clicking on it once. Right click on one of the items in the "Firmware name" column to the right. Select "Download All Files".
I do not have a good explaination for why NI-Motion 7.0 did not recognize your board. Do you have a second board you can try in the system? If not, could you ask your local sales representative if they have one you borrow for a quick test? Since the board is recognized by Windows 2000 Device Manager, I don't think there is an issue with the board, but it doesn't hurt verify this.
My best guess is that there was a confict during the installation process and your system did not get all of the required files. Though we do significant installer testing, there are rare occasions when a system is in such a state that the installation process does not function as expected. It is my experience that these rare instances do not occur on clean machines, but on machines that have had multiple products installed and uninstalled. If you do get a chance to try NI-Motion 7.0 again you may want to use these parameters to get the installer to create a log of the installation: "c:\setup.exe l*v c:\log.txt". This assumes that the setup.exe is in the c:\ directory. Go to start>>run and type this in without the quotes. The log file will be named log.txt in the c:\ directory.
Finally, you can technically use NI-Motion 7.0 in LabVIEW 6. You just need to copy the C:\Program Files\National Instruments\LabVIEW 7.0\vi.lib\Motion folder to the vi.lib folder of LabVIEW 6. Though this is not officially supported, there is no reason it shouldn't work.
Regards,

TS3212 apple application support was not found. Error 2(windows error)

Apple Applliation Support was not found. Error2 (windows error)?? what Can I do TO get this fix so I can use itunes?

i am currently experiencing the exact same problem. ive done everything and researched it completely. nothing has solved this. and I did as you said and downloaded quicktime separately, still nothing..keep getting the same message about "apple application support not found, error 2"..and that cant be, because it DOES in fact have that apple support when I downloaded the quicktime... im beyond frustrated with this! if ANYONE has a solution please help!!!!

Serial number not found and copy of windows is not genuine (it is though)

i have a
http://h10025.www1.hp.com/ewfrf/wc/product?cc=us&lc=en&dlc=en&product=4075831
Im trying to update my bios but cant seem to find it anywhere, ive uninstalled all hp application of my computer, so hp updating my bios while i dont know about seems pretty hard to do, where can i find it
It seems that my bios has lost its information, i phoned Hp about it and it appears my computer needs to be retatood or something along them lines, as my warranty has past i would have to pay £200 to get it fixed (rip off I know) they said this could be down to changing the hardware (i have not touched anything inside my computer as im not great with hardware aspect of computers, i am with software though. After i seen the "serial number not found" message appear i started to get messages like "please activate windows you have 30 days remaining (something along them lines) i have tried entering the product key thats on the bottom of the computer but some of the key has wear on it which makes it hard to read, so i tried a factory restall and hell broke loose, im getting error messages that i cannot use this factory installed partition thats on my hard drive.
Please help, im not paying for hp mistakes is there anything i can do, or something in there t&c that makes this there problem as they design motherboards to fail like this?
Regaards
Adam

Hi Adam
Check your PM box here at the forum. Accessed by first logging in and then clicking the little at top right of the page.
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Isight firewire cam not working in iChat on Leopard.

After installing Leopard on my Powerbook G4 867 dvi, my Isight Firewire Cam is not working anymore
in Ichat on Leopard.
Any solutions, it worked fine under Tiger.
Isight firewire cam works fine wirh Skype, Amsn , Photobooth and Quicktime.

Alright. I've done quite a bit of testing now.
My system is (as stated below,) a 12" PowerBook G4, 867 MHz, 640 MB RAM, 40 GB hard drive, Combo drive, AirPort Extreme. It was purchased in Summer 2003, and while the OS has been reloaded, it hasn't been for a long time, and at present, the OS was an install of Jaguar that was upgraded to Panther to Tigard, finally to Leopard.
I was experiencing the issue mentioned. In my case, I use a FireWire miniDV camcorder for video in iChat. It has worked fine in the iChat AV beta in Jaguar, and iChat AV in Panther and Tiger.
Upon upgrading to Leopard, I get the "Slow Network" explanation for why I cannot use video (or hosting multiperson audio, or screen sharing.)
My research shows the following:
This occurs both on the upgraded install, and a fresh install. (To an external hard drive.)
Using Ecamm's PowerBoost allows me to use every option that isn't barred outright by lack of hardware (video effects.) This includes both "Slow Network" issues and "Insufficient CPU" issues (essentially just multiperson video.)
So my guess is that the "Slow Network" is indeed a "bug", and will be fixed by an update from Apple.

USB/directshow camera not visible in max/imaqdx

I've got a Chameleon USB2.0 camera from Point Grey and I'm having problems getting it to show up in MAX.
I'm running a fresh installation of labview 2012, MAX 5.3.3f2, IMAQdx 4.0, IMAQ 4.7 on a windows 7 x64 lenovo T420 laptop.
I'm aware of the problems with registering the DirectShow filters for the Point Grey cameras: http://digital.ni.com/public.nsf/allkb/7DF278AF77461951862579AD0063B9AD
I've tried all of the various driver versions from Point Grey, and currently have installed the v2.4 x86 version
The camera is visible using AMcap, a lightweight DirectShow viewer, so it seems that the camera is operational and the DirectShow interface is functional.
I had an older version of Labview installed, and the camera was visible in MAX. I wanted to upgrade versions but didn't use the NI update service and just downloaded the various files from the website. About the time I upgraded MAX to 5.3 the camera disappeared from MAX. I assumed some problem with the upgrade, so I completely uninstalled both Labview and the camera drivers and tried a fresh installation, but I still can't see the camera in MAX.
Any ideas about how to get my camera to show up in MAX?
Thanks!

Did you find anything? I have two Mightex USB cameras hooked up and believe that I might be having the same problem.
I can actually get both devices to show up in AMCAP, but the 2nd camera that I have hooked up to the computer doesn't show up in NI-MAX.
I have spoken with the camera manufacturer and they have verified that these DirectShow drivers have worked on old versions of LabVIEW. Please get back to me if you know anything regarding this error.

Files not found installing 12c on windows 8.1

mk_dir.sql.sbs, dr0ulib.sql.sbs not found while installing 12c on wondows 8.1. I had heard its a downloading issue, so I downloade dit again. File not found persists.
Details:
Oracle 12c installation - Pastebin.com

Currently, Win 8.1 is not supported for any Oracle installs, so expect issues with the install or the use of the software. Which version of 8.1 ? Home versions of Windows are not certified for any Oracle installs. Were both zipfiles unzipped into a single directory before executing setup.exe with Admin rights ?
HTH
Srini

AVFoundationCF.dll not found? + Error 7 (Windows error 126)

About a week ago, I decided to upgrade to the newest version of iTunes. Upon trying to install the new version, it said it could not download as there was an error with quicktime. I then uninstallled and downloaded the newest version of Quicktime. The error message went away, however, now I am faced with this meassage everytime I attempt to install:
"An error occured during the assembly 'Microsoft.VC80.CRT,version="8.0.50727.4053"type="win32",publicKeyToken="1fc8b3 b9a1e18e3b",processorArchitecture="x86" Please Refer to Help and Support for more information HRESULT: 0x80073712
Then iTunes goes into "rolling back action" and 'completes' the install.
upon opening itunes, i get an error message saying that windows error 126 has occured or error 7, and that i should reinstall itunes. except i've done this six times now, so it clearly doesn't help.
supposedly the component AVFoundationCF.dll is not found, and the solution to that is REINSTALL, again, that doens't work.
What can I do?
Message was edited by: jashie

Had this problem when I tried to upgrade. I eventually uninstalled all iTunes v9 related products (iTunes, Quicktime, Apple Application Support and Apple Software Update). Then I tried a fresh install of the v10.1x setup. I get the following:
Pop up#1 (iTunes.exe - Unable to Locate Component):
This application has failed to start because AVFoundationCF.dll was not found. Re-installing the application may fix this problem.
Pop up#2 (iTunes):
iTunes was not installed correctly. Please reinstall iTunes.
Error 7 (Windows error 126)
Since I'm on XP SP3 Home Edition, I can't install the System Readiness Tool (only for Vista, 7 and Server 2008, etc.).
So I gave up and unintalled all Apple products (iTunes, Quicktime, AAS, AMDS, ASU). I then went back to an iTunes 9.0.2 installsetup.exe I have. Installed "successfully" and now when I launch iTunes I get the following error pop up:
Pop up#3:
The file "iTunes Library.itl" cannot be read because it was created by a newer version of iTunes.
What can be done now? I'd like to be on the current version, but I can't get around the first 2 pop ups with the methods I've seen posted here.

Firewire camera not found in MAX on Windows 7

Similar Messages

Maybe you are looking for