Firewire connection is not supported. Use USB to transfer songs...

Got message on my ipod saying "Firewire connection is not supported. Use USB to transfer songs" and then it says "Press Center to dismiss"
Restarted the ipod no use!
Connected with my PC no use! (its just charging) does not update of hooked to itunes)
Any ideas how i can fix this??
P.S I have tried cleaning the docking and the cable for any dirt still no use!

Does it give you this error all the time or only when plugged in with the cable?
If it does it all the time, have you checked the dock connector for bent pins?
If it only does it when plugged in, have you tried a different cable?
Patrick

Similar Messages

  • Error message: "FireWire connections are not supported.  To transfer songs"

    I recently purchased a Monster iCarPlay to play my ipod in my car. I have had no problems until recently. Upon disconnecting my ipod from the iCarPlay wire, I the following message popped up: "FireWire connections are not supported. To transfer songs, connect the USB cable provided." It also prompts me to click the center button to dismiss the message. However, I'vd followed these instructions, and the message does not go away. Does anyone know what I can do to resolve this problem? Or is it anything to worry about?

    That is the message you see when you attach a 5th gen iPod to a computer using FIREWIRE. so... i suspect that for some reason, the 3rd party iCarPlay device must be confusing the iPod into thinking it is being docked or attached to a data line of some type and not simply charging.
    As for the sudden occurrence of the message, it does seem strange however, keep in mind that you are using a 3rd party device that may not be supported or endorsed by Apple at all.
    Beavis2084

  • Firwirer connections are not supported?

    My ipod reads "firewire connections are not supported. To transfer songs connect the USB cable provided."
    I tried to copy a CD to my ipod. It was a copy of a CD from a friend from his ipod whch I guess is not compatable with mine. He ahs a PC. I have a mac. He ahs an old 60g ipod I have a new ipod culor 30 gb. My guess is that he has firwire connections and I have USB
    I now cant turn off the ipod. I can play it but the battery goes very quickly.
    It constantly reads the above message i.e firewire connected are not supported/
    I HAVE RESTORED FACTORY SETTINGS AND DELTED THE CD FROM MY ITUNES. WHAT can I do?

    Firewire connections are not supported. To transfer songs, connect the USB cable provided.
    That is the same message I'm receiving on my iPod as of yesterday. We've been on vacation for a week and the iPod has worked flawlessly, just like it has since the day I got it. That is, until yesterday.
    We were driving down the freeway when it started pausing, skipping, and generally giving me grief. I listen to it in the van via a connection through the cassette tape player. I've been using this set up since the day I got my 80gb video iPod.
    For whatever reason, that message simply started popping up. I can't seem to get the center button trick to work most of the time, but occasionally it will. No matter what I do, I can't turn off my iPod any longer. It has to simply go to sleep.
    So, I got home and the first order of business was using the option in iTunes to wipe the iPod clean, reset it to factory defaults, then reload all 60gbs worth of data onto it. I did that. I play around with it a bit this morning, but with nothing connected to it. It seemed to work fine and would turn off as normal.
    I connected it to the cassette adapter a short while ago, got about 2 miles down the road, now its doing the same thing again. Its giving the same error message, skipping/pausing, and won't allow me to turn it off.
    Help?

  • IPod and Firewire (I'm not even using Firewire but iPod is acting like i AM

    I know this may sound strange, but whenever I plug my iPod into a USB cable (to charge or add songs) this message appears on the screen:
    "Firewire connections are not supported. To transfer songs connect to the USB cable provided" "Press center to dismiss"
    I can still charge it AND I'm using the USB cable they gave me with the 5th gen. iPod (which I assume is the USB2 cable or whatever).
    I can't add my songs and it's making me really mad! Can anyone help?
    Toshiba Windows XP Laptop
    Toshiba Windows XP Laptop

    If your ipod worked normally and then started doing this it may be that there is dirty or bent pins or something on the ipod or cable connectors. It's worth a try to check them out, maybe with a magnifying glass. If you have access to another 5G cable you could try that too, along with trying it on another computer (be careful if that computer has itunes on it however - it could wipe your ipod content if it works!).
    If none of that works then you should go thru the 5 R's:
    http://www.apple.com/support/ipod/five_rs/

  • HT202343 Profile Manager 3.2.2 does not support 'use per-connection password'

    Profile Manager 3.2.2 does not support 'use per-connection password' for wireless configuration as stated here.
    https://support.apple.com/en-lu/HT202343
    This feature stops users credentials from being remembered by the device, particularly useful for multi-user devices in an enterprise environment.
    Any help would be much appreciated.
    Thanks in advance

    Yes Clinton I did same, but they were (Huawei customer support) surprised about this problem, They behave like they have no idea about USB 2.0 and  3.0 knowledge. They handsUp that reason I posted my problem in this forum.
    So is there any better solution to use any mediator between these USB version handling, Please let me know.
    Thanks
    Tauheed

  • Why does not ipad show on itunes? when i connected with my macbook using usb, just it is charging electricity.

    why does not ipad show on itunes? when i connected with my macbook using usb, just it is charging electricity.
    i don't know why...

    Sometimes it can be something very simple and easy to fix. Before you get into any involved troubleshooting, quit iTunes, restart your Mac, restart your iPad and then try to sync again.
    Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    If this doesn't work, then try the more involved stuff.

  • Intel Mac 10.4.x "Connection Method not supported -9786"

    we have a customer with the new intel powerbook and tiger system.
    but if he want to print via tcp/ip he get this error on the screen:
    "Connection Method not supported -9786"
    i could nowhere found this error code.
    any ideas ????
    andy
    powerbook g4   Mac OS X (10.4.6)  

    Hi Andy,
    I just read your posting from two weeks ago and thought I would add some info.
    Yesterday I had a customer suffering the same problem. They had just purchased an iMac w Intel and were attempting to connect to a Canon iR4570. They had other PPC Mac's which were running varying versions of 10.4 and were all printing okay. But this iMac was getting the error -9786.
    I found that he was trying to connect via IPP, but entering the queue name as LP (which is what you do for LPR connections). By changing the queue to socket://ip address:9100 the error was resolved.
    The thing to note about this situation was that since this was the first printer he was adding to his Mac, the protocol was defaulted to IPP. With the previous driver installations he had performed on the other Mac's, the protocol was defaulted to LPR. This would have been due to this protocol being the last one used previously. But the customer had only been taught to add the IP address and the queue name and wasn't aware of the protocol menu...

  • Can't listen for connections - Operation not supported

    Hi,
    We have install OSB Client on HP-UX 11i V2 HP rx5670 Server as per Oracle Secure backup Installation Guide.
    But we are getting following error message. Please help us to solve the issue:
    2010/12/29.10:23:02 can't listen for connections - Operation not supported
    # /sbin/init.d/OracleBackup start
    Starting Oracle Secure Backup services daemon.
    2010/12/29.10:23:27 can't listen for connections - Operation not supported
    Thanks
    Khairul/Bangladesh

    Have a look at the observiced.log file to see if that has any more detail, this is in /usr/tmp.
    I would check to see if there is something else on the system that is using TCP port 400 or 10000. On Solaris I've seen the webmin installation using port 10000. Both those ports need to be free for OSB to be able to start.
    With OSB stopped, you can "telnet <hostname> 400" and "telnet <hostname> 10000" to see if it connects. If it does then something is listening on that port.
    You should be able to do "netstat -na" as well, to show you listening ports.
    Rich

  • Sony Shake 5 not supporting my usb device; HELP

    My new Sony Shake 5 (LBTSH2000) does not support my usb device (ipod classic); please help! Dirk.

    Is there any error message on the screen when you tried using your iPod classic? Have you tried using just a standard USB device and see if that works?

  • Since the iPod Lightning connection is not supported, how can you take videos from your iPod 5th Gen to your tv?

    Since the iPod Lightning connection is not supported, how can you take videos from your iPod 5th Gen to your tv?

    Lightning TV out
    - Via Airplay to an Apple TV.
    or one of these cables.
    - http://store.apple.com/us/product/MD826ZM/A/lightning-digital-av-adapter?fnode=3 a
    - http://store.apple.com/us/product/MD825ZM/A/lightning-to-vga-adapter?fnode=3a

  • Error : 'The Connection can not be used to perform thsi operation

    Dear All,
    I am getting an error like 'The Connection can not be used to perform thsi operation, it is either close or Invalid in this context.
    Below is the code what am using:
    Sub Select_Query()
    Dim SQL_String As String
    Dim rs As ADODB.Recordset 'This holds the data
    Dim cn As ADODB.Connection 'Declaring Connection
    Dim cmdobj As ADODB.Command 'Declare command Object
    'Sheets("Payment").Select
    Set cn = New ADODB.Connection
    cn.Open ("Provider=MSDAORA;Data Source=MyDatabase;User ID=Prasad; Password=Prasad12;")
    Dim count_value As Long
    count_value = WorksheetFunction.CountA(Worksheets("Payments").Range("A:A"))
    For i = 4 To count_value
    SQL_String = Worksheets("Payments").Range("AA" & i).Value
    Set rs = New ADODB.Recordset
    rs.CursorLocation = adUseClient
    rs.Open SQL_String, cn, adOpenForwardOnly, adLockOptimistic, adCmdText
    Dim val As Integer
    val = rs.recordCount
    If val = 0 Then
    Worksheets("Payments").Range("AZ" & i).Value = "No"
    'Else
    'Worksheets("Uploaded").Range("O" & i).Value = "Yes"
    End If
    cn.Close
    Set con = Nothing
    Next
    'cn.Execute SQL_String
    'con.Close
    Set con = Nothing
    End Sub
    And select statment is picking one of the sheets, and SQL query is:
    ="SELECT sa.acct_id
    FROM ci_sa sa, ci_sp sp, ci_sa_sp ss, ci_sp_geo spg,ci_acct_char cac
    WHERE sa.sa_id = ss.sa_id
    AND ss.sp_id = sp.sp_id
    AND sp.sp_id = spg.sp_id
    AND spg.geo_type_cd LIKE '%RR%'
    AND spg.geo_val ='"&B4&"'
    and sa.ACCT_ID=cac.ACCT_ID
    AND cac.char_type_cd LIKE '%SDO%'
    AND TRIM (char_val) IN ('"&Master!G9&"')"
    Please help me in this..
    Regards,
    Prasad

    Please, this is a Oracle forum, not a VBA forum. Mark this thread as answered and post it in a VBA forum.

  • Flash Builder 4: "Flex 2 is not supported; use Flex 3.0.0 or higher "

    In our project we have to maintain an application developed in Flex 2, but we have licensed Flash Builder 4, which is now available for Adobe only. When we tried to configure Flash Builder 4 with Flex 2 SDK we get the following error: "Flex 2 is not supported; use Flex 3.0.0 or higher "
    What should we do to work with Flex 2 in Flash Builder 4?
    Thanks for the help

    In our project we have to maintain an application developed in Flex 2, but we have licensed Flash Builder 4, which is now available for Adobe only. When we tried to configure Flash Builder 4 with Flex 2 SDK we get the following error: "Flex 2 is not supported; use Flex 3.0.0 or higher "
    What should we do to work with Flex 2 in Flash Builder 4?
    Thanks for the help

  • Charging is not supported using this Accessory

    Hi
    i have been using iphone 4 with 4.1, and last week the phone completely went dead and neither did it charge not could i switch it on. then i had to do the rest using home and power/sleep button, then it switched on and i would charge it properly.
    few days after that i started getting the message "charging is not supported using this accessoty" then i upgraded to 4.2.
    since then i can hardly charge my phone. i have used the original cable(s) and wall socket(s) supplied by apple but its not working.
    please halp
    Message was edited by: amanj86

    I have recently purchased an ipod touch 4th Gen, 64Gb device and have used it without issue, including charging with a cable I purchased from K-mart which was better designed and more robust than the ones that come with the ipod. I used this cable for years with my 2nd Gen Ipod and my partners 3rd Gen Ipod (touch) without any problems either.
    Then, one day it just started to happen, not with the older ipods, just my new one and only when using the computer. Charging it on my My friends computer with the same cable is fine and my wall charger is fine and the older ipods on my computer are fine when also charged on that same cable. I don't care what apple says, it's either a glitch in the programming or a move to stop people from using 3rd party hardware by chipping everything they have in sight to scrape up extra cash and then telling the devices not to perform task unless the chip is detected.

  • Iphone 4 not connecting with macbook air using USB

    I am not able to connect my iPhone 4 with my Macbook Air using USB cord. Macbook Air is not able to detect the device.

    I had this problem when connecting my iphone 4 to my retina MacBook Pro. The phone was running ios 6 but I updated it to ios 7 and since then it works fine with no problems. Try updating it to the latest software and see does that help!

  • Daisy chaning firewire to import or just use USB?

    Two options for importing/downloading video from a camcorder to an external drive.
    1. connect the camcorder to the firewire 400 port on the external hard drive, and then connec the external hard drive to the macbook using the other firewire 400 port.
    2. connect the camcorder to the macbook using firewire and then connect the hard drive to the macbook using USB.
    My concern - won't daisy chaining require the data to go from the camcorder to the macbook and then back to the external drive? Wouldn't it just be easier to have it route though to the USB?

    Daisychaining will work fine unless your camera is a Canon. They do not share Firewire very well.
    Firewire is a peer to peer protocol, so data can go from camera to hard drive.
    If you have an AVCHD camera, either will work, but Firewire is faster.
    If you have a miniDV tape camera, you must use Firewire.

Maybe you are looking for

  • Can I use a green screen in Premiere Elements 13?

    I am trying to decide between Premiere Pro and Elements 13 and would like to save some money while still being able to have those capabilities to key. Thank You! -Jesse

  • How to personalize the Actions LOV in Sales Order Form.

    Hi All, I've a requirement wherein I need to remove the "Payments" fuction from the Actions button( from list of values) in Sales Order lines Form. Navigation: Order management Super User--> query or enter a Sales Order-->Line Items--> Click on Actio

  • Mail taking up 5MB for iCloud Backup - Why?

    Why does my iCloud backup say I have 5MB of Mail on my iPhone to backup when I do not use iCloud Mail, I use Hotmail...Never have used iCloud email.    Trying to backup my phone to the iCloud for the first time.   Is there a way to turn off backing u

  • Configuration of UWL with Abap webdynpro

    Hi, We are doing configuration of UWL with Abap webdynpro. Our purpose to launch Abap webdynpro application , once clicked to a worlitem in UWL iView. we are unable to do due to following errors. We have done in this way. 1.Created ECC system in EP 2

  • Need to know the best practice for converting string to double

    I have a string and want to convert to double if it is a valid number, else want to keep as it is. There can be couple of ways doing it and I want to know which one is best if I have lots of strings, specially from performance point of view. 1) Use D