Firewire connection to my G% and Macbook Pro

We have two camcorders and an external hard drive.
1 Panasonic NV GS500
2 Panasonic NZ DS 30
3 hard Drive Plieades 3.5"
Recently the GS500 and the Hard drive will not connect to the computer. The Hard Drive lists as "Unknown Device " and the GS500 does not register at all. The older DS 30 connects no problem.
Any Suggestions???

maybe try a firewire repeater for more power to the bus.

Similar Messages

  • Connection failures between iMac and Macbook Pro

    I'm experiencing frequent connection failures over my wi-fi network between my iMac and Macbook Pro on an otherwise strong, stable network. I can connect both of my computers to the Airport Time Capsule that I use as my wireless router without a problem, but for some reason I get connection failures between the computers say, 50% of the time. Sometimes it works fine, others it just hangs before giving me an error message. Any suggestions?
    OS 10.9.3 on both machines
    Apple Airport Extreme Time Capsule
    iMac, 3.06GHz i3 (2010)
    Macbook Pro Retina, 2.4 GHz i7 (1st Gen)

    Hi jt in nyc,
    Some checks:
    Use Airport Utility on one of the machines
    - Click on the Time Capsule ( enter password if prompted )
    - Click on the Edit button
    Under Airport Utility -> Wireless -> Wireless Options
    Are the Time Capsule Wireless options set correctly?
    - Country -> you know this, change if it is not
    - 2.4GHz and 5GHz Channel set to Automatic
    - Click on Cancel button to return to the Airport Utility graphic diagram.
    - Click on the Time Capsule
    - Click on your machines listed beside wireless clients
    Are the machines reporting an excellent quality at different distances from the Time Machine?

  • Can I connect a G5 tower and Macbook Pro to one 30" Apple Display Monitor?

    I would like to know if it is possible to connect a G5 tower (older power pc) and a new Macbook Pro to one 30" Apple Display. If so, how would I do this? Thank you.

    <http://www.kanexlive.com/snapx>
    (Will not work with Thunderbolt display.)

  • Connecting Both Mac Mini and MacBook Pro to single LED display

    Is it possible to dock two mac computers to the same monitor, and have the ability to switch between each computer on the fly?
    I am trying to dock both a MacBook Pro and a Mac Mini to the same 24" Apple LED display. I would like it to be as close to a "switch" solution as possible, where it takes only a single button push to change between which computer is being displayed on the monitor. I am used to a PC, where I can hook two computers up to the same monitor, and change the input in the monitor to switch between the two computers that are hooked up to it.
    Since there are not any buttons on my monitor, and I am not used to Mac's yet, I am not sure how to easily switch? I was told I could do it when I bought it, but now the help desk is closed....
    Message was edited by: colsonjm

    I was hoping there was a better option. I have the wireless keyboard and mouse, and the two computers. I doubt there is a way to switch the wireless keyboard/mouse without disabling and reconnecting the bluetooth connection (and I really do not think there is a KVM switch for bluetooth devices yet)...
    That being said, I was hoping to continue to control the laptop with the laptop keyboard, and the mini with the wireless devices, and NOT go the KVM switch route... I was hoping there was a way to have the mini and the macbook both connected, and either push a button or access a menu to switch between the two...
    So am I hearing that this is not a viable option? I need to invest in a potentially expensive KVM switch, or run one of the two computers remotely from the other?
    The reason I am frustrated is that I was told when making the purchase that it was very much possible (by multiple employees over the phone and in store). I was also told by the tech people over the phone that everything I needed to do so would be in the box (no extra cables or anything needing purchase).
    Message was edited by: colsonjm
    Message was edited by: colsonjm

  • Can I connect my iPad and MacBook Pro both via an iPhone hotspot?

    First, a little background. I have an aging MacBook Pro (~5 years old), and my netbook was smashed on the way to work last night. My cell phone (not an iPhone) crapped out a few weeks ago.
    So my first priority is to replace my netbook with an iPad. When I can afford it, I also want to upgrade to a new MacBook Pro. I've also been thinking of getting an iPhone.
    One thing that always confuses me is Internet connections. I currently connect my MacBook Pro to the Internet via Verizon and use T-Mobile for my cell phone.
    I was surprised when an Apple salesman told me the iPhone has a "hotspot" that I can use to connect both an iPad and MacBook Pro to the Internet. But an Apple salesman at another store told me the hotspot will connect the iPad.
    Can anyone offer some details? I've been browsing some of the other threads, but I still don't really understand what a hotspot is. Am I correct in understanding that as long as I have an iPhone with me, I can use it to connect my iPad to the Internet? Can I similarly use it to connect a MacBook Pro (either my 4-year-old+ model or a new model)?
    What kind of connection speed does a hotspot offer? I do a lot of websurfing and web design. Would a hotspot connection be about as fast as my current connection via Verizon?
    Also, is the hotspot feature available with either AT&T or Verizon?
    Thanks.

    Your hotspot will be billed by AT&T or Verizon based on your iPhone's model. Only the iPhone 4 from Verizon would allow a Verizon hotspot. Others have posted information revealing that the Verizon 3G connection is somewhat slower than the AT&T service. Also, the Verizon service suspends the use of hotspot when you take a phone call. The AT&T service continues during calling.
    Selecting the hotspot feature under General> Settings> Personal Hotspot will change your data plan from your previous 250MB, 2GB, or unlimited amount to a new 4GB plan that includes tethering. AT&T charges me $45 instead of my Unlimited, but No Tethering Allowed, $30.
    You can connect three devices that have WiFi. Verizon hotspots can connect five. Your speed should be about the same as the iPhone 4 browsing speed on 3G. If your phone is on WiFi, the devices need to connect separately to that WiFi, not to your hotspot. I would love to see a software update that allows my WiFi connection to be shared, so I don't have to manually connect the iPods that my boys use one at a time.

  • The new Macbooks and MacBook Pros - Firewire being phased out?

    Hi,
    Many thanks in advance for your attention.
    With the latest release of MacBooks and MacBook Pros, does it seem to anyone else that Firewire is being phased out? Even the new iPod Touch's cannot be charged via a Firewire cable.
    (The first iPod Touch has a Firewire/ USB compatible dock).
    I am somewhat baffled as a year ago Firewire was all the rage for Video Editing. It had a better reputation for sustained transfer of data and not dropping frames.
    (Critical with video editing).
    Also - the several miniDV cameras I've owned, including my current model, all transfer their data into a computer via a Firewire port.
    I have three External Drives at the moment (mostly for Video Editing) and all work with either Firewire 400 or 800 (or both). None have a USB 2.0 port.
    The new MacBooks don't even have a Firewire port.
    The new 15" MacBook Pro has only a port for Firewire 800.
    Anyone else have any thoughts on this?
    Should I begin shifting my external drives to USB 2.0 connectivity?
    Even though USB 2.0's reputation for transferring Video is not very good?
    - Ross

    Ross Corsair wrote:
    I am somewhat baffled as a year ago Firewire was all the rage for Video Editing. It had a better reputation for sustained transfer of data and not dropping frames.
    (Critical with video editing).
    When importing video from FireWire-based camcorders, the video is sent in real time to the computer, which is why FireWire is necessary. That's because FireWire-based devices use tape to record video (DV or HDV), which cannot be accessed in the same way as memory cards or hard drives (the camcorder can't rewind during capture).
    With USB-based camcorders, this is no longer an issue, as the video is stored and transferred as a file, rather than a real-time stream.
    Also - the several miniDV cameras I've owned, including my current model, all transfer their data into a computer via a Firewire port.
    FireWire-based camcorders won't work with the new MacBooks (you won't be able to import your video without using another computer).
    The new 15" MacBook Pro has only a port for Firewire 800.
    And an ExpressCard slot, which can be used to add additional FireWire or eSATA ports if necessary.

  • IMac and Macbook Pro no longer connecting to the Wifi?

    Hi there,
    I've been in London this weekend, only to return home to find issues connecting to my wifi. Weirdly, it's only the iMac and Macbook Pro having trouble, everything else is connecting fine e.g iPad, Phone, Android Tablet etc.
    I'm getting disconnected around every 20 seconds and cannot figure it out! It's so frustrating as I'm wondering if there's been an update released for OS X that it has downloaded recently? Especially seeing that when I run windows from bootcamp on my iMac, it doesn't disconnect. And I also don't believe it's an issue with the hub.
    Has anyone got any suggestions? I've tried removing the network and re-adding, help for about an hour but still not much use.
    Thanks, Matt

    Wi-FI connection drops
    Wi-Fi Problems in OS X Yosemite
    Wi-Fi Problems in OS X Yosemite (2)
    Wi-Fi Problems in OS X Yosemite (3)
    Wireless Diagnostics
    Also try turning off Bluetooth.

  • My IPOD and Macbook Pro both will not connect to the Itunes store through Itunes says no internet connection, but I can connect through safari and I have a internet connection

    My IPOD and Macbook Pro both will not connect to the Itunes store through Itunes says no internet connection, but I can connect through safari and I have a internet connection

    As I mentioned above, I am not very tech savvy so I have no idea why a wireless protocol would be showing up there, I'm just listing everything I see in hopes that someone might know something I can try. This is why I am asking for help here - I'm not sure what has happened that has made me unable to connect, especially since it seemingly occured while nobody was using the computer.
    I guess I should clarify that I'm not a total hillbilly- normally my firewall is set to 'on', but I set it to 'off' to try and troubleshoot the issues here as I was told that sometimes it can interfere with the computer's ability to connect to the internet. If this is not the case and firewall does not affect anything, I will turn it back on while I try to fix this.
    I have tried the method you mentioned above a few times - I actually contacted my ISP earlier this week and they recommended resetting the router like that. They didn't mention any known network issues.

  • Can someone connect in FaceTime if they are using a friends Macbook Pro, yet, doens't have an Apple ID??  For example, I have an IPAD and a Macbook Pro.  Can I connect to FaceTime on my Macbook Pro and connect with a friend using my IPAD????

    Can someone connect in FaceTime if they are using a friends Macbook Pro, yet, doens't have an Apple ID??  For example, I have an IPAD and a Macbook Pro.  Can I connect to FaceTime on my Macbook Pro and connect with a friend using my IPAD????

    I have also tried changing the contact emails(you can contact me by) in Facetime(diff email for IPAD and Macbook Pro).  Facetime tried the call, I see the accept buttom appear and it goes away as the call never connects?   Any ideas??

  • Can't Connect MacBook and MacBook Pro at same time to AEBS

    I can't connect a MacBook and MacBook Pro to an Airport Extreme Base Station at the same time. Whichever one connects first works and the other one doesn't. It was working fine for months and then stopped working. Can only use one computer at at time. There's nothing else on the network. It may have been a software update that caused the problem, but I'm not sure which one. Have done all software updates and am not using any security on the network, so that's not the problem. Many sleepless nights trying to get this fixed, so any help would be greatly appreciated!

    bcassid
    Do me a favor. So many users are experiencing this (no myself though) and I have suggested so many things with nothing constantly working. There are successes here and there, but nothing consistently solves the problem. However, try the following in Airport Utility and both Macs, and then let us know what happens.
    *Can’t Access Certain Web Sites / DNS Server Settings Issues*
    I'm wondering if either or both Airport Utility & Network Prefs have proper DNS server settings. Try this
    Launch Airport Utility.
    Select TC on left.
    Click "Manual Setup".
    Select "Internet" from the toolbar above.
    What's listed for "DNS Server(s):"?
    Try putting in these servers from OpenDNS
    208.67.222.222
    208.67.220.220
    Click "Update".
    Your TC will restart with the new settings.
    Next, launch System Prefs --> Network Prefs.
    Select the service you usually connect with on the left (Airport or Ethernet).
    Then click, "Advance..."
    Click the "DNS" tab.
    What's listed for "DNS Server(s):"?
    Usually "10.0.1.1" will be listed first in gray. This refers back to the settings in the Airport Utility.
    Nevertheless, it doesn't hurt to add the DNS servers noted above here as well.
    Click "OK" then click "Apply".
    Finally, reboot your Mac.
    Now see if you have internet access all around.
    Let us know if this resolves your issue.
    Cheers!

  • After connecting my iPhone to my Macbook Pro to download photos to my phone, my pages application is now gone from my computer. The icon is still in the dock. What happened and how do I get it back?

    After connecting my iphone to my Macbook Pro to download photos to my phone yesterday, my Pages application is gone from my computer. The icon is still in the dock. What happened and how do I get it back? Its not in my trash or anywhere else.

    The other 2 applications open like normal. All three give me info.
    Pages     ver.4.1          265.8MB
    Numbers ver. 2.1          89.5MB
    Keynote ver. 5.1.1        238.1MB
    They all list Apr 3 as the last time opened. That was when I upgraded to Mavericks. I certainly used pages and numbers since then as I have alot of my work files on this computer?
    Just very odd. I did find my original iWorks disc from when I bought the computer. I'm assuming i can reinstall it. Will try that. Thank you for all your help. Would still like to know what did happen?
    Kat

  • Recently when I connect Iphone 4s and MacBook Pro my computer stopped see new photos on Dropbox.

    Recently when I connect Iphone 4s and MacBook Pro my computer stopped see new photos on Dropbox.  I have changed iCloud password on Mac and Iphone, nothing.  Deleted some pictures of iPhone, didn't help.  Any ideas what I did to mess this up?

    I cannot deleted.  Computer keep telling that my dropbox is open.  Don't see how to shot it off.  Do I need to delete all pictures from dropbox first and delete application after.  Will I loose all these pictures? Usually, I copy all photos to iphoto app.

  • I connected to home share on my ipad iphone and macbook pro now it's asking me to turn on home share on the apple tv but I have no other remote, any ideas?

    I connected to home share on my ipad iphone and macbook pro now it's asking me to turn on home share on the apple tv but I have no other remote, any ideas?

    Welcome to the Apple Community.
    If home sharing isn't enabled on the Apple TV, you will need the aluminium remote that came with it to do so.

  • Airport extreme loses internet connection all the time with imac and macbook pro

    I keep losing the internet connection with airport extreme on my imac and macbook pro but NOT with my pc

    Ok, so when you say you lose internet connection, is it disconnecting from your wireless network so there are no bars?
    And are there usually full bars?

  • Connecting iMac and MacBook Pro using a non-Apple wireless router

    I use a Belkin wireless router. Is there any way for me to connect iMac and MacBook Pro using the router to share files? I think I read somewhere that I need AirPort Extreme for this, but I'm not sure. Thank you.

    Great resource from Dennis...file sharing, I.e. networking, is a function of the operating system settings and not the brand of router. Using Mac OS X 10.6 on both machines makes it really seamless. Following Dennis's kb article should make the two almost act like one machine.

Maybe you are looking for

  • Create Trial Balance

    Hi, How do I get to build a trial balance in BPC. We have BPC 10.0 Sincerely Nicky

  • Best option to load data

    Hi, I have a DW table which has around 300K rows with country and state information along with other columns.. My Scenario: I need to display country and state in drop down in front end for user to select them as search criteria.. currently applicati

  • Execute Crystal report from client computer

    Dear Friends, we create one report in CR on computer A. Now i want to run this report on computer B using Crystal Report Viewer. Its giving me the data which is last run on computer A. parameters are not available here why. Any help. Regards Malik

  • Workflow from form

    I am trying to initiate a workflow from a form. I have seen several posts in the forums and confusing. I have a form called example user form. In that form I have placed a button. I want as soon as I press the button; test workflow should initiate. W

  • Problems after installing latest itunes

    I installed the latest itunes 9.0.1 the other day, since then my ipod nano ,3rd gen, wont sync, a message comes up when you plug it in saying 'new hardware found, there was a problem with installation and may not load properly' then continues to do n