Firewire disk does'nt boot when updating it from 10.5 to 10.5.1

I installed Leopard for security reasons on an external firewire disk, all went fine with the installation,but when I try to update it to 10.5.1 the disk never boots again ... any solution ????

Encountered the same problem. No solution yet.

Similar Messages

When updating itunes from 10.0.1.22 to anything higher, my network card stops working, HELP!

When updating itunes from 10.0.1.22 to anything higher, my network card stops working, HELP!
I have an iPhone 3gs, and a work iPhone 4 on iOS 4.3.3. I want to sych with iTunes but clearly must upgrade to >10.1
When I do, my network card no longer works on my desktop. Please HELP!
My spec is;
NETWORK CARD;

polydorus wrote:
This isn't my thing, but the following post on this seems to have helped some people:
http://discussions.apple.com/thread.jspa?messageID=12622179#12622179
That's the go-to advice with this one, p. (I certainly don't have much to offer beyond it, but it does a superb job in the vast majority of instances.)

Error when updating pages from template

When updating pages from a template I have been occasionally
getting this error message:
While executing onLoad in Swap Image.htm, the following
JavaScript error(s) occured:
At line 325 of the file "Hard Drive: Applications: Macromedia
Dreamweaver 8: Configuration: Behaviors: Actions: Swap Image.js":
Reference Error: createObjRefs is not Defined
I am on a Mac running 10.3.9, Dreamweaver 8.02.2809
Any ideas on how to fix this?
Thanks,
Paul

When updating pages from a template I have been occasionally
getting this error message:
While executing onLoad in Swap Image.htm, the following
JavaScript error(s) occured:
At line 325 of the file "Hard Drive: Applications: Macromedia
Dreamweaver 8: Configuration: Behaviors: Actions: Swap Image.js":
Reference Error: createObjRefs is not Defined
I am on a Mac running 10.3.9, Dreamweaver 8.02.2809
Any ideas on how to fix this?
Thanks,
Paul

What does it mean when icon bounces from dock

what does it mean when icon bounces from dock

If you mean that it bounces while in the Dock, it means that the application is launching. If that's not what you mean, please post back and describe your situation/question further.
Regards.

External FireWire Disk will not boot

Hi Forum,
after some installations (OS 10.4.9, latest security update and Qucktime 7.1.6 I canot boot from my external disk (Lacie) connected to FireWire 800 port. The Apple shows up but then nothing more happens. Does anyone have a hint?
Thanks
Oliver

Add me to the list also. I had an external firewire disk as a RAID mirror for my boot disk. After a system crash (and some problem with my internal disk) I couldn't boot from the firewire stripe. This used to work.
I've tried creating a single-disk "degraded RAID pair" on the external disk and cloning the internal disk to it (using Disk Utility "Restore"). The cloning works fine but I can't boot from the copy. This is how I originally set up the RAID pair (clone, boot from clone, add internal disk to RAID group). This used to work. I bought a new firewire disk and it has exactly the same problems.
My original firewire disk was an Acomdata E5. My new firewire disk is a Coolmax Gemini CD-311 enclosure with a Hitachi 250GB deskstar inside.
iMac G5 Mac OS X (10.4.9)

My iMac does not boot after update!!!

I have just update my iMac (Intel) with Apple Software update. I have not updated for quite a while and obvious there were a bunch of stuff to update on my mac. However, when the computer requests a restart, my computer simply does not restart at all. I have tried to make it restart from the apple icon, and it still stay on. So I turn it off manually and the problem kicks in. My computer start with the grey apple icon screen and the little progress indicator, but it does not boot into OS X!!! It remains in a blue screen with the mouse pointer.
I restarted it again unplugging everying and nothing changed. Then I tried Disk Repair and it does not help neither. Then I tried to hold the power button while turning it on till I get the loud beep noise and flashy light. The problem stay the same. I do not want to erase my disk...
Someone Helps!
Intel iMac 20" Dual Core / MacBook Pro 15" Mac OS X (10.4.6)

Interesting. Have you installed any third-party RAM? Is there any possibility that your RAM became loose? Make sure your existing RAM is seated properly.
Have you performed a SMC reset?
Resetting the SMC can resolve some computer issues such as not starting up:
From the Apple menu, choose Shut Down (or if the computer is not responding, hold the power button until it turns off).
Unplug all cables from the computer, including the power cord and any display cables.
Wait at least 15 seconds.
Plug the power cord back in, making sure the power button is not being pressed at the time. Then reconnect your keyboard and mouse to the computer.
Press the power button on the back to start up your computer.
Are you able to boot in SAFE mode? If so, you can trouble shoot from there.
Be sure the computer is shut down.
Press the power button.
Immediately after you hear the startup tone, press and hold the Shift key.
Tip: The Shift key should be held as soon as possible after the startup tone but not before.
Release the Shift key when you see the gray Apple and progress indicator (looks like a spinning gear).

HP Z620 does not boot when external Seagate hard drive is connected

I'm troubleshooting an HP Z620 workstation with 32GB RAM, one 500GB HDD + one 1TB HDD running Win 7 Enterprise 64 bits, this user has 2 external USB 3.0 HDDs, one Buffalo 2TB + one Seagate Desktop Backup Plus 4TB; the problem comes when the external Seagate HDD is connected and the PC is turned one, for some reason the PC does not boots, it shows a message that states "Non-disk or no boot disk error" and sometimes it tries to boot, but then goes thru the "Windows repair option" or "Start Windows normally" routine, none of these results on starting the PC.
The only way this PC starts and works properly is when PC is started with the external Seagate HDD disconnected and then connected once the Win 7 is up and running; the problem described above does not happens with the external Buffalo 2TB HDD and the Seagate HDD have been tested throughly and no errors or problems have been detected on it.
I'll really appreciate your attention to this, as well as your prompt response.
Regards,
Gaspar Campos

Hi:
You may also want to post your question on the HP Business Support Forum -- z Workstations section where there may be more folks familiar with that issue.
http://h30499.www3.hp.com/t5/Workstations-z-series-xw-series/bd-p/bsc-272#.U1k4uv1OXGg

Windows Server 2008 R2 Does not boot When Back up drive removed

I have a windows Server 2008 R2 Standard server RAID 10 installed. I have a non raid drive installed as the backup HD. The Backup drive is now failing. When I went to switch it with a new one the system does not boot and is asking for
a boot drive. I have been searching for solutions and cannot find any. Any ideas?

Hi,
Could you confirm if your boot volume is on that non-RAID disk (maybe 2 volumes on that disk and one of them is the boot volume)?
At current situation, first please test to connect the failed disk back to the device and see if it will help.
Or you may need to run a boot-up repair with an installation disk.
If you have any feedback on our support, please send to [email protected]

Develop/Map model disabled when updating Lightroom from disk

Hello,
I got a disk for Lightroom 5.2 and entered the product key after instillation. However, when updating to 5.7 the develop and map models become deactivated and it says I must renew my membership. I regestered my product key with Adobe.com and re-installed but the error persists. Am I not able to upgrade my Lightroom even though I own a disk with the program?
Has anyone run into this issue before or familiar with what is going on?
Thanks,
Michael

uninstall your lr.
use the below link to dl lr 5.7.1 and install using your password.
Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.7.1| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5.5, 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

KT6V + sempron 2800 does not boot when BIOS saved

Hi,
I have just bought a new sempron 2800 to be use on a KT6V LSR. I plugget in my KT6V but was not recognised well (but all was working ok with windows). To be recognised, I have flashed with the last bios of MSI my motherboard... and now I have the following problem:
- I clear CMOS, then boot. It comes ok (processor detected and set a 1200Mhz)
- Then CMOS has a bad checksum: I enter setup, then load default, save.
- I reboot: the computer does not boot up.
If I re-clear CMOS I can re-enter setup and modify frequencies or other options. But when I save my modifications, then the computer does not reboot anymore (I have to re-clear cmos again)...
I tried to apply the configuation I found in this thread:
http://forums.amd.com/lofiversion/index.php/t69536.html
It says that SDRAM must be at 333, FSB at 166 and multiplicator at 12. When applying this settings, it does not boot (the leds indicate that the chipset initialisation (the first step) does not pass).
If I just load biios default, the leds indicates that it fails when checking the memory (second step of boot). I suspect that it's a problem of memory (but my memory was working well before !): it's 2x512 of DDR 400.
Any suggestion is appreciated :D . I spent several hours trying to configure the bios but it does not boot..
(I'll also try to find help on AMD forums...)
(Some extra info: my PSU is 26A for 12V, so it seems that it's not due to the PSU (as I read in the FAQ of this forum).
Thanks,
Ptitmain.

AMD Geode™ NX Processor Family & DB1500 Development Board
Powerful Software Development Capability for AMD Geode™ NX Processors
The AMD Geode™ NX processor family consists of three versatile and powerful products - the AMD Geode™ NX 1250@6W* processor, the AMD Geode™ NX 1500@6W processor** and the AMD Geode™ NX 1750@14W processor.***
The AMD Geode™ NX processor family leverages advanced architecture to provide powerful solutions for a variety of Internet edge, peripheral applications, and more. The AMD Geode™ NX processor family provides the highest x86 performance for fanless operations.
The NX processor family leverages Mobile AMD Athlon™ processor technology to deliver superior computing power for a variety of thin-client and other applications including point-of-sale terminals, kiosks, high-end printers and home media systems.
Key features include:
* Low-power consumption
* Advanced 7th generation core
* Long-term manufacturing and support
* 128KB level 1 cache
The AMD Geode™ NX processor family is supported by existing low-cost infrastructure, proven architecture and a long-term supply commitment.
The Geode NX 1250@6W processor is based on an AMD Athlon™ core and demonstrates the company’s commitment to making enhancements to its x86 product offerings and delivering a full line of x86 products to market. The AMD Geode family of embedded solutions is part of AMD’s strategy to offer assets, resources and vision for extending x86 solutions from low-power embedded solutions up through the highest-performing server platforms. The Geode NX 1250@6W processor is a cost-effective solution for customers requiring sub-one gigahertz performance without a fan. Operating without a fan not only reduces design costs and allows for better power management, but also allows the processor to co-exist in virtually any environment because it can operate silently.
The AMD Geode NX 1250@6W processor broadens the selection AMD’s customers have for x86 solutions that range from sub-one watt to 14 watts, allowing them to choose a processor that best meets their individual design needs.
.13um fabrication process
128/256KB L1/L2 cache
266MHz Front-Side Bus
Floating Point logic
AMD PowerNow!™ technology
Less than 6 watt maybe i should replace my PSU with battery (typical) to 9 watt (maximum) Total System Power Dissipation
Socket A compatibility
3DNow!™, MMX™ and SSE Instruction Set

System does not boot when PCIe express Card is inserted in system. Using Spartan-6 PCIe Integrated Endpoint Block 1.3

Hi,
I am using Spartan-6 PCIe Endpoint Block core v1.3 and I am using ISE 12.1. I have used the PIO example design,
modified it according to our design.
The core is configured as below:
BAR0 - 8KB, 32-bit, Memory Type
Lanes - x1
Clock - 125 MHz (system clock)
The card is a custom board. When the card is pluged into the system the system does not boots, it hangs.
I have tried debugging using chipscope and monitored trn_lnk_up_n, trn_reset_n and trn_clk. trn_lnk_up_n stays
high (deasserted), trn_reset_n stays low (asserted), trn_clk is low (No clk).
What might be the issue?
Thanks & Regards.

Thanks Gabor, for the response.
I refered couple of answer records like AR# 34873 and AR# 34894, I monitored trn_reset_n, sys_reset_n, clock_locked, PLLLKDET and RESETDONE signals as suggested in AR# 34894.
Status as follows:
SYS_RESET_N = 1 (deasserted)
TRN_RESET_N = 0 (asserted)
CLOCK_LOCKED = 0 (deasserted)
PLLLKDET = 0 (deasserted)
RESETDONE = 0 (deasserted)
which means the transceiver PLL frequency is not within the predetermined tolerance. Is this problem related to the PCIe Jitter Attenuator I am using on the board to derive 125MHz from 100MHz system Clock.
Thanks & Regards

Computer does not boot when pxi 1033 is connected

hiiiiii...........i am using NI pxi-1033 for my application & this pxi is connected to my system through PCIe-8361. i am using it from last 10 months, now suddenly my computer does not boot up. i start pxi first then start the computer but computer screen shows no signal. there is no blue screen error.
can you give me any point to troubleshoot the problem.

This probably doesn't help, since your setup used to work, but I have had to run the MXI Compatibility Tool on more than one PC.
http://joule.ni.com/nidu/cds/view/p/id/3119/lang/en
One PC would only boot one time in ten, before running the tool.

How does BerkeleyDB know when cached results from stat function are valid ?

Something curious: I have a berkeley database about 2G in size and a program that (1) opens the database, not DB_RDONLY; (2) calls stat(), without DB_FAST_STAT; (3) calls sync(); (4) calls close().
Running this program the first time takes a good amount of time in the stat() function - 20 minutes at least - and thrashes the disk all that time. So it's trawling the database to get record counts etc.
Running the program again takes only a few seconds so clearly the database is caching those stats and knows they're up to date - makes sense.
What's odd though is why the stats weren't known to be up to date on the first run. The database was actually copied from another box where the last thing to happen was a run of the same program. So it should have had up-to-date stats cached in it.
It's as if the cached values are somehow invalidated by moving the database to another machine. Why would that happen ? Where are the cached stats held and how does berekelyDB decide when they're up to date ?

I still cannot solve this problem, but I have some more observations:
1) yes it is a JApplet, and yes, the data streaming is performed in a separate thread.
2) Wireshark sniffing shows that data sent out by the PHP datasource on the server is sent immediately, and is not buffered (am using ob_start(), ob_flush() and flush() alls in the PHP script).
3) On Windows Vista, using Internet Explorer or Firefox, there is a constant 30 second delay before the Applet returns from this line: InputStream is = url.openStream();
4) After this 30 seconds, data appears in the Applet, but it can be seen also with java console debug prints that the data seems to be buffered. The newest data shown in the Applet is not the newest data sent to the client by the PHP datasource script.
5) On a SUSE Linux client, the Applet works as it should, there is no delay time in showing the data.
It appears as if there is on Windows a buffering of data which I do not wish to have and which does not occur on Linux. I need to find out how to get the URL openStream() call to return immediately allowing the initial data to be read and shown on the Applet. And I need to remove the buffering of data so that the data can be shown on the Applet when it arrives.
Can anyone help? Why does this work on Linux but not on Windows, and what can I do, at best within the Java code, to get the Applet to work on Windows as it does on Linux?
Thanks!
Steve, Denmark

Any way to turn off errors when updating pages from the template?

I'm using Dreamweaver MX. My site is huge. It's an intranet
spanning dozens of departments. Some of those departments have
subsites that don't fall under the intranet's control, although
they are embedded within our site's folder structure. When I make a
change to the template and update pages, every time I hit one of
those subsites I get tons of errors, from "template not found" to
"unmatched body tag". The errors that pop up each have to be
clicked on before the updating can continue. I get hundreds of
these.
Is there any way to make errors not pop up while updating
pages from the template? Or even to exclude certain folders from
being checked? (Cloaking doesn't do it.)

> I'm using Dreamweaver MX. My site is huge.
Both of these are problems, I'm afraid. Combining that with
templates is
really trouble.
> "unmatched body tag".
Errors such as this are definitely caused by errors in your
page itself.
Can you show me a page where you would get this?
> Is there any way to make errors not pop up while
updating pages from the
> template? Or even to exclude certain folders from being
checked? (Cloaking
> doesn't do it.)
Valid code will not produce these errors. Unfortunately, the
only way to
avoid them is to remove any validation hiccups from your
pages.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"abna" <[email protected]> wrote in message
news:f14ue2$pk5$[email protected]..
> I'm using Dreamweaver MX. My site is huge. It's an
intranet spanning
> dozens of
> departments. Some of those departments have subsites
that don't fall under
> the
> intranet's control, although they are embedded within
our site's folder
> structure. When I make a change to the template and
update pages, every
> time I
> hit one of those subsites I get tons of errors, from
"template not found"
> to
> "unmatched body tag". The errors that pop up each have
to be clicked on
> before
> the updating can continue. I get hundreds of these.
>
> Is there any way to make errors not pop up while
updating pages from the
> template? Or even to exclude certain folders from being
checked? (Cloaking
> doesn't do it.)
>

OS X Lion does not boot when my Time Machine disk is connected

Everytime I boot or reboot my MacBook Pro I am stuck at the grey screen and OS X Lion will not boot. When I disconnect my Time Machine disk (external disk connected via usb) I suddenly get the loading screen and OS X Lion boots properly.
Pretty anoying I think, does anyone have a solution for this problem?

Have a look at the boot log messages, using Console.app (also with the "dmesg" command), and see if there's a clue there, or, set the boot process logging to "verbose" (i.e., using TinkerTool System) and find out what's really going on live at boot time. (Also, do you have BootCamp setup, or any ofther bootable partitions?)
Hope this helps.

Firewire disk does'nt boot when updating it from 10.5 to 10.5.1

Similar Messages

Maybe you are looking for