Firewire drive E01G300

After doing my research I have settled down on a firewire drive E01G300.
It costs about $250 so I wanted to know your opinion with this product before making the final sale.
I contacted maxtor and they said that this product should be able to do multiple logins and is based on OxFord 911 chipset.
http://www.newegg.com/product/Product.asp?Item=N82E16822144365&CMP=OTC-Froogle&ATT=Maxtor+OneTouch+II+E01G300+300GB+7200+RPM+External+Hard+Drive
Any thoughts on this will be greatly appreciated.
Thanks
Gopal

Thought you could use this info about getting FireWire to work!
First, you should always Repair Permissions in Disk Utility before and after any update; I would do that now. If you installed your update with FireWire plugged in, your Mac may not recognize it anymore.
Try resetting your FireWire ports by disconnecting all FW devices, shut down your Mac and unplug it from AC power (wall socket) for 30 minutes. plug it back in and try FW.
If that did'nt work, download the combo update from this site (yours may be corrupt), not Software Update, disconnect all firewire + USB devices except keyboard + mouse, Repair Permissions, re-install update, Repair Permissions again + try. Hers should be the 10.2.8 Combo update. Others reading, download the Combo that applies to your system.
If that still did'nt get it Zap the PRAM. While restarting Mac hold down the following key combo Command-Option-P-R. Keep holding those keys down till you hear the second start-up chime, then release.
For those of you with Macs that are not PowerBooks or iBooks, a bad internal battery can cause FireWire to not be recognized, so make sure it's good!
Good Luck!
Cheers!
DALE

Similar Messages

  • Firewire drives do not show up on network

    I have a G5 with 2 external drives, 1 firewire, 1 USB
    I have a G4 with 2 external drives, both firewire.
    When these computers are networked,
    The G5 sees the internal drives from the G4.
    The G4 sees the internal drives from the G5, as well as the connected USB drive.
    But neither computer sees the external firewire drives of the other computer.
    I used to see these drives and made aliases for them, but they do not show up now.
    I am using the admin accounts from each computer.
    G5 running 10.4.5
    G4 running 10.3.9
    What is the cause of this problem? How can I mount the firewire drives on the networked computers?

    I need to modify my question. I also have a G3 running 10.2.8
    Yesterday I noticed that the Network icon in the G5 sidebar had an eject symbol next to it. That seems strange, upon reflection, as if something was not right.
    I shut off all the machines for the evening.
    Today, I restarted all the machines. Chose Finder->Go->Connect to Server->Browse
    From each machine, I was able to see the external drives on the other machines, as well as the internal drives, over the network. I did not use nor install sharepoints. It just works (with an admin account).
    However, on the G5, there is an external firewire Firelite drive. It is formatted as Fat 32.
    It does not show up in the Browse window when I connect to the G5 from any computer. If I move it to the G4, it also does not show up when I connect to the G4 from any computer. So it does not seem to be related to the OS version.
    In other words, it seems that since the Firelite is Dos formatted, I cannot see it on the network, even though it is a firewire drive.
    So how can I fix this problem?
    iMac G5, TiBook, G4 MP 500; G3 beige 333, iMac 333, others   Mac OS X (10.4.4)  

  • Has anyone been able to use an Apple Thunderbolt to FireWire to daisy chain a dozen or more FireWire drives?

    Ever since I realized that I was not able to connect my FireWire daisy chain to my brand new Retina MBP there has been problems. Four months down the road, I am still unable to use my FireWire drives and have experienced terrible problems whenever I connect my FireWire daisy chain to this new Mac.
    I have bought two of these adaptors from Apple now and both do the same thing. The daisy chain has been working perfectly for years with my older MBP and still does! There are no problems until I connect to the new Mac.
    I have 15 various hard drives in NewerTech and DatOptics enclosures for over 22 TB. When connected to the new Mac, I would have multiple apps just hang, sometimes just Apple apps, sometimes 3rd party. I will not be able to force quit them and they will keep relauching as you can watch them in the Force Quit window. The Finder will hang and there is no relaunching it. I am having to do a force shutdown twice an hour which leaves no time for work!
    After four months of this, now I am being told that Apple will buy back my Mac at full price. But I have basically lost the good part of four month’s worth of work because of constantly fighting the new Mac. This is cost me all my savings and I am about to lose a client. It certainly seems that releasing Thunderbolt1 was a huge, huge mistake.
    Does anyone know of any large Fire Wire daisy chain working with Thunderbolt?
    TIA,
    R

    Yes, my first post is all about how darn iffy the adaptors are and I have two of them to return now.
    I question your answer because I am betting that four drives that are in one enclosure NOT all RAIDed together as one drive, but as four separate drives that those four drive will count as four devices. The daisy chain that I had going had eight drives in TWO quad boxes, four drives in TWO dual drives and another drive in a single enclosure. A total of five “devices” if you will, but also a total of 13 drives that were usually in this daisy chain.
    Both of the Apple branded Thunderbolt to FireWire adaptors chocked BIG TIME on this and it works no problem on my older MBP. You basically can not use a new Mac when you are connected to a daisy chain like this!
    Just checked the Apple website and indeed, I can get a new MBP with FireWire 800, just not with the Retina display! I wish that I would have known this five months ago before this all started!

  • Can't properly open fcp6 project on firewire drive on another computer

    I have a long and complex fcp6 project that I have been editing with fcp6 on my piwermac g5 quad running leopard. The media and render files are each split between my boot drive and a second internal drive. I copy both drives onto a partitioned FireWire drive and then plug it into my macpro 3.1. The names on the FireWire partitions are exactly the same as the powermac drive names. The project opens perfectly on the 8 core macpro from the FireWire drive and I am able to render and other things much faster . However, I am about to outgrow the 1TB FireWire drive, so I got a larger one. I duped both partitions onto the similarly partitioned and identically named new bigger firewire drive....but when I go to open the project half the media filess are disconnected and even after I manually reconnect all kinds of error messages come up and the project is totally unworkable. So, why does the first firewiure drive work perfect but not the cloned nee FireWire drive? I even put an extra internal drive in the macpro and cloned the original FireWire to it but it does the same thing as the new FireWire, totally unworkable. I don't understand why things work perfectly with first FireWire but not with any other internal or external drive.  Any help would be tremendously appreciated.

    The original fiteewire which does open on the mac pro was partitioned apple partition map.  The new FireWire drive that doesn't open properly is also apm, but I've erased and partitioned i GUID.  I've tried using both disk utilities and superduper for the cloning in the past.  I'm doing the cloning onto the guid partitions right now and will let you know if it helps in the morning.  At any rate I appreciate your help.

  • How to secure firewire drive data for multi user mac ?

    I have a couple of external firewire hard drives attached to my mac which contain all my work files.
    My 6 yr son has started using my mac so I have set him up his own account and set up the parental controls etc.
    BUT - is there any way I can set things up so the firewire drives dont appear to him or so he cant delete anything ?
    It seems fairly straightforward to protect files files on the main hard drive but these firewire drives mount every time a user logs on and he seems to have full access to them.
    Thanks in advance if you can help.
    emac   Mac OS X (10.4.9)  
    emac   Mac OS X (10.4.9)  

    Log in under your account, and highlight the drive on the Desktop. Click cmd-i to Get Info. Make sure that, under Ownership and Permissions, you do not have "Ignore Ownership on this Drive" ticked. Now, again using Get Info, make sure that all top-level folders are owned by you, and that other users do not have access. (You might want to reduce the number of top-level folders to make this easier.)
    Now log in as your son and make sure you don't have access to those folders.
    Matt

  • How do I use a firewire drive as my start up disk?

    I have a 12" powerbook that I am trying to use with an external firewire drive as my start up disk. aI install 10.5 easyily but then when I try to start up from that drive it will not recognize the drive as a Start up disk. Any ideas as to what I am doing wrong.

    First, what Disk Utility tells you is correct, that SMART indicators aren't supported on an external drive. Nothing is wrong.
    I might try this approach .... get SuperDuper at http://www.shirt-pocket.com/SuperDuper/SuperDuperDescription.html, download it to your internal hard drive, then use it to copy your internal drive to your external drive. Make sure the option to make the external drive bootable is checked. When that's done, reboot holding the option key down, and choose the external drive to boot from. That should work with the firewire connection.

  • How do I install a bootable copy of Tiger to an external Firewire drive?

    I've got a problem with my optical drive and cannot boot from a CD or DVD on my 17" flat panel iMac, running 10.2.8. I have bought Tiger and would like to upgrade my OS but want to be able to run some disc repair utilities on the iMac prior to doing the upgrade but can't run them on my boot disc.
    I'd like to be able to install Tiger on my external FW hard drive, install Techtool pro on that same drive and then try to repair the internal drive on my iMac by booting from the external drive. Is that possible? Is it a good idea? Can I install to the external drive from my internal Superdrive without being able to boot from the install DVD? How should I do that?
    Thanks in advance for any help.
    Michael

    Because you must boot from the Tiger DVD in order to install Tiger I'm afraid you are somewhat out of luck. However, with no guarantee either express or implied here's something you can try:
    First, download a freeware utility called Carbon Copy Cloner from www.versiontracker.com or www.macupdate.com. Second, connect your Firewire drive and insert the Tiger DVD into the optical drive. Be sure it mounts on the Desktop along with the Firewire drive. Third, open your Disk Utility from the Utilities folder and use it to format or erase the Firewire drive. If you prefer you may wish to partition the Firewire drive to allocate a partition for the Tiger DVD (you will need about 6 GBs.) Fourth, open the CCC utility and click on the Lock icon beside the grayed out Clone button and authenticate. Then click on the Preferences icon. In the section labeled "Target Disk Options" be sure that the box labeled "Make bootable" is checked. No other items should be used. Click on the Save button. Fifth, select the Tiger DVD as the Source Disk, select the partition on the Firewire drive as the Target Disk. Now click on the Clone button.
    Go away for a while because the clone process will take time. Once it finally completes you can eject the Tiger DVD. You now should be able to boot the computer from the Firewire drive partition. Open your Startup Disk preference pane, select the Tiger partition on the Firewire drive from the icon list, then click on the Restart button.
    If this works your machine will boot into the Tiger installer from the Firewire drive. You can then install it onto your iMac. I would suggest you use the Archive and Install option. You may find the following helpful:
    http://discussions.apple.com/thread.jspa?messageID=607363&#607363

  • Blue screen of death when La Cie external firewire drive connected

    I tested a LaCie external firewire drive on my iMac and it worked fine. I packed it up well and posted it to a friend who gets the blue screen of death when the LaCie is connected to her iMac. She's not even trying to boot from it.
    My iMac is 9.1  and hers is 8.1.  We are both running Snow Leopard.  Was there some problem once upon a time with chipsets or am I mis-remembering?
    TIA

    Create an ISO (Encore) or folder on your hard drive (Encore or Premiere Elements) and then use the FREE http://www.imgburn.com/index.php?act=download to write files or folders or ISO to disc for DVD or BluRay (send the author a PayPal donation if you like his program)
    Imgburn will read the ACTUAL disc brand from the disc, which is not always the same as the box label (Memorex is notorious for buying "anything" and putting it inside a Memorex box)
    When you write to disc with Imgburn, use the SLOWEST possible speed setting, so your burner has the best chance to create "good, well formed" laser burn holes... since no player is required to read a burned disc, having a "good" one from a high quality blank will help

  • Firewire drive no longer recognized after upgrade?

    having an onset of problems the last 2 weeks.
    first upgraded to 10.4.6 on mac mini 1.42 non-duo, worked a few days than acted weird with apps crashing. had to reinstall from 10.4 disk. seemed ok. repaired permissions, ect. after reinstall (and a subsequent power outage) a firewire drive attached at time was no longer recognized by mac mini or connected imacG3. reinstalled 10.4.2 on mac mini. installer unable to reinstall 10.4.6., I would like to have firewire drive recognized again. when attached to other firewire drive in daisy chain, says device unrecognized, other wise unable to get any info on drive. what to do?

    I am having nearly the exact same issue as you are experiencing. My Western Digital Dual-Option Media Center 160 GB FW HD is going in and out big time. It seems to be there for a time but then conks out. I have to disconnect the power and now the drive seems to be malfunctioning.
    Same story with my LaCie 52x CD Burner. I placed the Disk Warrior CD in there and the computer recognized the disc at first but then spinning beach balls galore!
    This has to be one of the worst updates to an OS X system I can remember. I can only think PowerPC QA testing has gone through the toilet since the Intel move was completed.

  • When I download a movie from iTunes the cover art disappears. I try get info and add the art, it doesn't show up. So it's just gray. It opens and plays fine. Apple can't figure it out. It's an nas drive. When I use a firewire drive I get the art

    When I download movies from iTunes to my NAS drive, I don't get the cover art. It shows up while its downloading, but when it's finish it disappears. If it has an iTunes extra the cover art is there. I tried get info and add the cover art, it never shows. Regardless of how I add it. Funny thing is, if I download the same movie to my external firewire drive, no problem its there. I've called Apple with no success. I've even tried copying the movie with the art from the firewire drive to replace the file on then NAS drive I still loose the movie cover art. I also tried several times to re download it, no luck. Any ideas? I'm out of ideas.

    Do you have any videos/movies in the video app?
    In iTunes if you right click on the video and select Get Info and go to the Option tap what Media Type is shown?

  • My iMac (late 2006) no longer boots from FireWire drives, although they contain all the system files.

    My iMac (late 2006) no longer starts (boots) from Firewire drives, although they all contain a current system (Mac OS X 10.6.7). If the drives are connected with USB 2, they boot normally. The FireWire drives appear in the Start Volume program, but they do not boot. If I press and hold the Alt key while booting, only the internal drives and the USB drives appear as options. What can I do in order to boot from FireWire drives as I always could in the past?

    I'd first recommend doing a SMC reset and if that doesn't work refer to:
    http://reviews.cnet.com/8301-13727_7-10333969-263.html
    and
    http://www.thexlab.com/faqs/firewiretroubleshooting.html
    SMC RESET
    Shut down the computer.
    Unplug the computer's power cord and all peripherals.
    Press and hold the power button for 5 seconds.
    Release the power button.
    Attach the computers power cable.
    Press the power button to turn on the computer.
    PRAM RESET
    Shut down the computer.
    Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.
    Roger

  • External firewire drive won't mount

    I've got an external Western Digital firewire drive that's been somewhat flaky recently, and today my Mac won't mount it.
    When I open Disk Utilities, I can see the drive (along with the other drives daisy chained together). When I click on "mount," I get a message saying the drive can't be mounted and that I should try running disk repair. I've run both repair disk and verify disk a few, and each time it says that everything is just fine. However, the drive still won't mount.
    Any thoughts about how to get the drive working again?
    For what it's worth, this drive is basically my manual backup drive that I use each day just as a safety backup. I don't think I'm going to lose anything extremely important if this drive is dead or if I have to try erasing the drive, but I'd like to see if I can rescue it first before taking drastic action like that.
    Thanks!

    Dale,
    That sounded like a brilliant thing to try. I took the drive out of the daisy chain and plugged it into the unused firewire port in the computer. I ran the repairs and crossed my fingers, but came up with the same thing
    At least I've eliminated one more option. Wish I could mark your reply helpful, but I'm not seeing that option available . . .maybe I've used my "helpfuls" for one day.
    Although this is PROBABLY duplicate material on this drive, I'm going to hold out for another day or so in case anybody else comes up with another brilliant idea before I take the plunge and reformat the drive.
    Thanks!

  • Booting from a Firewire Drive

    Hi there -
    I'm trying to install Leopard from an external firewire drive (Sony 810UL). It comes up in the Start-up disk opions as well as the simple 'Resart to install Leopard' on the deskop.
    Problem is - when I restart, my Powerbook won't recognise the drive.
    Any clues?

    Is there something wrong with your '12 PowerBook G4's internal optical drive? I had an experience where my '12 PowerBook G4 wouldn't recognize my iLife '05 DVD-ROM. Resetting the PMU fixed it for me. You might want to try that to see if it gets the internal optical drive working again. Here's a link to the Apple Knowledge Base article that describes how to reset the PMU: http://docs.info.apple.com/article.html?artnum=14449. If that doesn't work your internal optical drive may have dirt on the laser lens. If so running a cleaning CD in the optical drive should dislodge the dirt & enable it read discs again.

  • External Firewire Drive Ceases to be Detected After DVD Drive Installation

    About a week ago, I replaced the original Pioneer DVR-103 drive in my Quicksilver 800 Mhz/dual G4 with a Pioneer DVR-115 to work with newer, faster media. After restarting the machine, I got an alert that told me my 80Gb Maxtor external firewire drive wouldn't initialize. The only real option it gives me is to reformat, thus losing valuable data. That's a non-starter. I've tried restarting the machine with the new DVR unplugged, but I get the same result. I've zapped the Pram, thinking it was a dirty pram, but no go. I've reset the nvram to default, using the command line, but no luck. The odd thing is that applications (like iTunes) continue to access the music files stored on it. I need this drive. Seagate support has been worthless. Any ideas?

    About a week ago, I replaced the original Pioneer DVR-103 drive in my Quicksilver 800 Mhz/dual G4 with a Pioneer DVR-115 to work with newer, faster media. After restarting the machine, I got an alert that told me my 80Gb Maxtor external firewire drive wouldn't initialize. The only real option it gives me is to reformat, thus losing valuable data. That's a non-starter. I've tried restarting the machine with the new DVR unplugged, but I get the same result. I've zapped the Pram, thinking it was a dirty pram, but no go. I've reset the nvram to default, using the command line, but no luck. The odd thing is that applications (like iTunes) continue to access the music files stored on it. I need this drive. Seagate support has been worthless. Any ideas?

  • Error message -36 when copying large  files from Firewire drive

    I have kept several large audio files as backup on an external LaCie Firewire drive. When trying to copying them back, almost all of them starts to copy, then stops and (after a minute or so) report error message -36.
    I have run both Apple's Disktools and the latest Diskwarrior, but no errors are reported. I gues the audio files must have become corrupted... What do you suggest that I do? The contain valuable audio information that I really don't want to get lost.
    Helge K.

    Not helping but others are having the same problem...
    http://discussions.apple.com/thread.jspa?messageID=2564624

Maybe you are looking for