Firewire Drive in System Profiler But Not In Finder?

I have a 2.3 MBP with a Seagate FreeAgent 1 TB drive attached via FW 400.
Just yesterday, it wont show up in the finder, but does in Apple System Profiler. This drive is full of iMovie Events I'd hate to lose.
Is there a way using Unix to try to mount it? Any suggestions will be welcomed.
Tom

After unplugging power and firewire from the device try refreshing System Profiler. Refresh in System Profiler can be found under View OR Command R will do it. I use this all the time when I loose either USB or Firewire Connections and nothing else, such as unplugging, doesn't work.

Similar Messages

IPod shows up in system profiler but not in /dev and disk utility

Hi,
I have a Problem with my iPod. It works perfectly when I connect it to other macs.
Though on my mac it appears only in the system profiler, but not in itunes, /dev or diskutilities. Other USB devices are working correctly.
I already reseted my ipod but this doesn't solve the problem. Neither did the update of the iPod firmware.
Does somebody know this Problem? What can I try to solve it?
Thanks.
About my iPod:
It's an iPod Touch, system Profiler is telling:
Version:          0.01
Bus Power (mA):          500
Speed:          Up to 480 Mb/sec
Manufacturer:          Apple Inc.
Product ID:          0x1293
Serial Number:
Vendor ID:          0x05ac (Apple Computer, Inc.)
iTunes says:
serial number: 910952nua75j
Running the system 4.2.1
About my Mac:
It's a MacBook Pro, 2,16 GHz Intel Core 2 Duo, running 10.4.11

I'm pretty upset. It seems that the only solution to this problem is to buy some new mac products!
I have Applications on my computer that will not work on a new system and I don't want to update my system + all expensive apps just because my ipod refuse to downgrade.
I used to be a mac fan and I still like it, but this kind of "tricks" are unacceptable. I bought an ipod because I didn't want to spend time on fixing some stupid problems and now I already spent weeks trying to make my expensive ipod work on my mac (and all this because of a stupid firmware problem). I am now really disapointed.
So if anyone should have an idea on if it's possible to downgrade my ipod (or other solution?) in order to make it work again with my system, please post it here. Thanks.

Hard Drive Shows Up In System Profile, But Not On Desktop

I took the old hard drive out of my intel mac mini (60gb fuji) and installed it on my power mac g5 (1.8 single); it worked long enough for me to copy all my old files over before it randomly froze and i had to restart. after that the new drive only shows up in the system profiler and not on the desktop. in the system profiler it states its capacity but not how much is available, like the main drive. any ideas on how to get the old drive working again?

figured it out, thanks!

Device shows up on System Profiler but not Disk Utility or Finder

I have a Samsung P3 which up until now has worked perfectly; I plug it in, move files onto it, and then eject it.
But a few days ago I was charging it on the mac and in the morning unplugged it in a hurry without ejecting. I don't know but this might be the cause of the problem.
Basically I can't find the P3. The device itself says that it is connected, and it registers on System Profiler, but it is not on Finder or Disk Utility, and I can't move anything onto it or get to it at all.
How do I solve this?
I don't really want to download any software if that's ok.
Thank you!

NO such thing as a Buffalo HD, contains a Seagate HD inside the box.
verify on another Mac if same, likely this very common issue, read about same here:
SATA card failure:
Your dead external hard drive is likely fine! Great hope for your 'faulty' external HD

USB drives show up on list in System Profiler, but not on desktop

Hi, I have a 2.0 USB hub with 2 external USB drives attached, and sometimes they show up on the desktop, sometimes they don"t. When they don't, I can find them in the System Profiler under USB, and when I click refresh, they still show up in the list but don't show up on the desk top, or in the device utility either. Is there some way to get them to "re-appear" on the desk top? I too only have 1 USB port that will run them, but this doesn't make them show up on the DT. Anyone have an idea of what to do?
Thanks in advance for any help!

Hi, no they don't. If I connect them one at a time, they are fine. Sometimes I can get them to show up, and they stay on the desktop until , for some reason, they disappear and I get a dialog that says this drive was not put away properly . . .. I put the computer to sleep, I unplug the hub, start up the computer, plug in the hub again, but can't find a consistent way to get them to show up!

System profiler recognizes ipod but not in finder or itunes

My ipod is recognized on system profiles but it does not appear on finder or itunes! what do i do?HELP!

Josie20 wrote:
nothing happens when i reset it and the computer doesn't see it!
Ummm...earlier you said System Profiler saw it. Did/does it look like this or something different:
iPod:
Capacity: 495.62 MB
Removable Media: Yes
Detachable Drive: Yes
BSD Name: disk3
Version: 10.01
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: Apple
OS9 Drivers: No
Product ID: 0x1300
Serial Number:
S.M.A.R.T. status: Not Supported
Vendor ID: 0x05ac (Apple Computer, Inc.)
Volumes:
WALKINGSHUF:
Capacity: 495.59 MB
Available: 239.25 MB
Writable: Yes
File System: MS-DOS FAT32
BSD Name: disk3s1
Mount Point: /Volumes/WALKINGSHUF
<Edited by Moderator>

Inbuilt isight camera is detected in system profiler but no image is being detected only a black screen shows up. I have tried all of the troubleshooting instructions and it still wont work. The iMac im using is OS X 10.6 and was an ex-floor model

inbuilt isight camera is detected in system profiler but no image is being detected only a black screen shows up. I have tried all of the troubleshooting instructions and it still wont work. The iMac im using is OS X 10.6 and was an ex-floor model

Hi,
I would try a Safe Boot first. (This will take longer than a normal Boot and you will need to Restart afterwards).
If it were an older OS I would also suggest going to System Preferences > Displays and making sure the display is set to Millions. (My MacBook Pro does not have this option in Snow Leopard so I did presume Snow Leopard does not have it).
With some laptops there have been some issues with the cable up the back of the screen pulling loose with regular and frequent use of the lid, but this will not apply to you based on your specs. (it does take time to appear and is also somewhat rare). However it seems enough contact with the camera can make it appear in System Profiler and power it on but not give a pic.
If a Safe Boot does not work I would also try a PRAM reset.
Shut down the computer.
Restart it holding down Apple/CMD (or ⌘)+ALT( ⌥)+P+R Keys until you have heard three Start Up Bongs.
This is actually "less" destructive in that it clears less memory items than Safe Boot but they are different enough to warrant trying.
Do you have an older version of iGlasses installed ?
The one for Leopard does not work for Snow Leopard.
Do you have Web Browser open ?
This may point to Google Video Chat Plug-in and Flash Conflict. It would be rare to allow another app to access the camera even if not displayiong a Pic.
(Chrome Installs the Plug-in as does the standalone download).
Knowing what "any application" exactly you are trying might help us pin it down.
Any additional downloaded apps that can use the camera ?
Do you happen to have something balck in front of the camera ?
8:20 PM Sunday; October 9, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

DVD Drive issues, plays CDs but not DVD data or regular - Satellite (unknown series type)

I tried to update the firmware but ran into some strange issues. First of all according to google, the drive is manufactured by Panasonic. Toshiba doesn't make their own drives? For this reason I wonder if it is improperly detecting the drive make/model.
Anyways I downloaded the firmware update for it, version 1.03. It is a MAT**bleep**A UJDA760 (going from memory, model may be slightly diff like UDJA). When I run the firmware update it doesn't detect the drive at all and says it is for a THINKPAD?? Weird...
Also, if you have a link to a guide for removing this drive I would appreciate it. I want to verify that windows is detecting the model/maker correctly. It is not one of the simple hotswap types, it looks like I have to remove at least the entire bottom of the laptop.
I am working on this for a client, I do tech repair on craigslist but my laptop hardware expertise is limited most of my experience is with desktops.

joe7dust wrote:
I tried to update the firmware but ran into some strange issues. First of all according to google, the drive is manufactured by Panasonic. Toshiba doesn't make their own drives? For this reason I wonder if it is improperly detecting the drive make/model.
Anyways I downloaded the firmware update for it, version 1.03. It is a MAT**bleep**A UJDA760 (going from memory, model may be slightly diff like UDJA). When I run the firmware update it doesn't detect the drive at all and says it is for a THINKPAD?? Weird...
Also, if you have a link to a guide for removing this drive I would appreciate it. I want to verify that windows is detecting the model/maker correctly. It is not one of the simple hotswap types, it looks like I have to remove at least the entire bottom of the laptop.
I am working on this for a client, I do tech repair on craigslist but my laptop hardware expertise is limited most of my experience is with desktops.
Typically if the optical drive can read CDs but not DVDs (or vice versa), there has been a hardware failure of the DVD or CD circuitry. Drivers/firmware aren't going to solve the problem, only replacement of the drive.
Find the correct drive at http://www.sparepartswarehouse.com/
Find unofficial disassembly instructions at http://www.irisvista.com/

Hi, I have a Indesign user who inherited a PC with Indesign installed. Indesign works with old PC user profile but not the new user. Any ideas how I can resolve this?

Hi, I have a Indesign user who inherited a PC with Indesign installed. Indesign works with old PC user profile but not the new user. Any ideas how I can resolve this?

Question # 1 is what do you mean by "inherited"? Is this a case where the computer belonged to someone else? Your user would not be entitled to use a program licensed to someone else.

Critical BitLocker Drive Encryption system files are not available

Hi all,
We are running into some issues when attempting to configure BitLocker Drive Encryption through the BitLocker UI on Windows Server 2008SP2.
On running the BitLocker configuration screen we are presented with a message stating that
‘Your system volume is not configured correctly to allow you to use BitLocker Drive Encryption.
Critical BitLocker Drive Encryption system files are not available’
We believe this issue may have been caused during a recent hardware migration using the DoubleTake Move software as we encountered a similar issue with the Windows Backup utility not seeing any available HDDs.
Has anyone else encountered a similar issue and aware of any potential fix?

I think it should be supported on Windows Server 2008 as it is supported on Windows Vista.
Can you check whether BdeHdCfg.exe is present in System32 folder. If not can you copy the BdeHdCfg.exe installer from higher version of OS and copy it to the system32 folder on Windows Server 2008 and then run the command with the administrative rights.
NOTE : Make sure to change the directory to %SystemDrive%\Windows\System32
Before running the command.
Regards, "Gaurav Ranjan" =========== NOTE: Mark as Answer and Vote as Helpful if it helps =======

Critical BitLocker Drive Encryption system files are not available- which was working earlier.

Hello All,
The E drive (external USB drive) of server which was encrypted using bitlocker. earlier it was working perfectly fine. On running the BitLocker configuration screen we are getting with a message stating that ‘Your system
volume is not configured correctly to allow you to use BitLocker Drive Encryption. Critical BitLocker Drive Encryption system files are not available’
now whenever we are clicking on E drive it is showing to format the disk.
can anyone help me to understand which are the files required or repair for bitlocker?
Thanks & Regards,
MAsud Hussain

Hi Masud,
Do you have any progress at the moment?
If there are any related error messages in Event Logs, please post them out for further analyzing.
Best Regards,
Amy
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

I have a big ? in my docK that says system profiler but when I double click nothing comes up - where is the system profiler

I have a big ? in my dock that says "System Profiler" but when I double click nothing comes up - where is the system profiler --

Thank you so much - System Information did it!!

IPhoto frustrating error..The volume for "Df23.JPG" cannot be found. It prompts for all photos with this issue rather than offering an option to ignore. I can find the images in spotlight but not in Find Photo. Does anyone have a solution

iPhoto frustrating error..The volume for "Df23.JPG" cannot be found. It prompts for all photos with this issue rather than offering an option to ignore. I can find the images in spotlight but not in Find Photo. Does anyone have a solution?

Unless you have the source files that were on the TC or Windows machine you will have to start over with a new library as follows:
Start over from scratch with new library
Start over with a new library and import the Originals (iPhoto 09 and earlier) or the Masters (iPhoto 11) folder from your original library as follows:
1. Move the existing library folder to the desktop.
2. Open the library package like this.
Click to view full size
3. Launch iPhoto and, when asked, select the option to create a new library.
4. Drag the Masters (iPhoto 11) folder from the iPhoto Library on the desktop into the open iPhoto window.
Click to view full size
This will create a new library with the same Events as the original library but will not keep the metadata, albums, books slideshows and other projects. Your original library will remain intact for further attempts at fixes is so desired.
OT

Files show up in downloads but not in Finder

Files showing up in downloads but not in Finder I am running OS X 10.9.5 on my MacBook Pro. I am having a problem with Finder being able to display all the files in folders, if any. The files show up in downloads for instance but when I go to my downloads in Finder, the folders are empty.

The screenshot doesn't show the downloads…
It may also help to know what you are expecting to see in there - for example Application XXYY says I downloaded AABB, but I can't see AABB.
Certain apps have their own settings for where to store files - more info needed.

Since my update, I can't adjust the volume from my keyboard...the volume keys have a locked symbol that shows when I press them. I checked System preferences but can't find a way to get the lock off. Thoughts?

I can't adjust my volume from the keyboard volume controls... they seem to be locked. I tried system preferences, but couldn't find how to "unlock" them. Thoughts?

Did you try unchecking this function? It seems to work in reverse of what you would expect, or is that just my imagination?

Firewire Drive in System Profiler But Not In Finder?

Similar Messages

Maybe you are looking for