Firewire HD didn't show in tiger after showing in Leopard

I recently upgrade my Powerbook G4 15" OS to Leopard. I plugged in today a Imitation 2.5" firewire harddisk which I used for a long time running smoothly from those days of OS9, yet it runs smoothly still in the Powerbook G4.
But then when I plugged the same firewire HD back to my MacBook [2G intel core duo] or iBook G3/600 which still run the Tiger, the disk didn't show up any more even when I launched the disk utility. Show again in Leopard & not in Tiger, I try again & again.
What's wrong with it? Can anyone help or know any solution posted since I can't find anything similar so far from the discussions.

Sorry that I have wrongly posted this question twice.
And I could not find a way to delete the extra one.

Similar Messages

How do I reinstall Tiger after having Snow leopard on my intel desk top

I have an intel dual core Apple desk top. It was orginally loaded with Tiger but now has Snow leopard. I partitioned the disk but it will not accept Tiger. I keep getting the message: "cannot load tiger on this machine" Any tricks or secrets to doing this ?

"I partitioned the disk but it will not accept Tiger. I keep getting the message: "cannot load tiger on this machine" Any tricks or secrets to doing this ?"
I did all these things before posting here. Please don't ask me to wash my hands after I already did.
"I keep getting the message: "cannot load tiger on this machine" Any tricks or secrets to doing this ?"

Install from SCSI CD fails: ERROR: boot device didn't show up after 30

I have a x86 based server w/SCSI HD and DVD drive.
Install fails with following.
Waiting 30 seconds for device /dev/disk/by-label/ARCH_201108
ERROR: boot device didn't show up after 30 seconds
Falling back to interactive prompt
You can try to fix the problem manually, logout when you are finished
sh: can't access tty; job contro turned off
[ramfs /]#
I hooked up a IDE DVD drive and using same CD installs OK. Then, once installed, I switch my DVD back to SCSI that failed the install, and guess what? Arch booted from my HD now recognizes the SCSI DVD drive, I can mount it and so on. Looks to me like the install kernel doesn't support my SCSI DVD drive but the installed kernel does.
I need the Arch install to work from the SCSI DVD drive on my system. I'm trying to develop an Arch distro for my particular system, which there are about a dozen of in the field, they all have SCSI DVD and no IDE drives. Will I have to add a SCSI driver to the boot kernel? Or is my problem something else?
I notice there is no /dev/disk/by-label (ther is a /dev/disk/by-id by-label and by-uuid).
I do a:
"[ramfs /]# lsmod | grep sr_mod"
sr_mod 14951 0
cdrom 36329 1 sr_mod
scsi_mod 131482 7 sg,sr_mod,sd_mod,libata,mptspi,mptscsih,scsi_transport_spi
[ramfs /]# lsmod | grep scsi
mptscsih 20040 1 mptspi
mptbase 63459 2 mptspi,pmtscsih
scsi_transport_spi 20059 1 mptspi
scsi_mod 131482 7 sg,sr_mod,sd_mod,libata,mptspi,mptscsih,scsi_stransport_spi

scrath "I notice there is no /dev/disk/by-label (ther is a /dev/disk/by-id by-label and by-uuid)."
Should be: I notice there is no /dev/disk/by-label (there is a /dev/disk/by-id by-path and by-uuid).

My playlist didn't show up on new laptop after copying from the old laptop

What can I do when my playlists didn't show up on new laptop after copying from the old one?

abombaci wrote:
I just simply copy only the whole iTunes music folder to my external hard drive, that's it and it goes good. That way if you just copy the whole iTunes folder it also carries along with it all it's subfolders. If subfolders aren't carried over you may end up with a library with missing album arwork. Album artwork, iTunes media folder, itunes previous libraries, itunes XML folders etc., etc. You get the picture.
Yes.
This is much better way than changing the media folder location.
Keep everything in the same iTunes folder.
However, when I do it this simple way as compared to the Apple way it doesn't save my play counts or ratings.
Since it is exactly the same library, everything should be the same.
Then just go to external drive click on iTunes folder and then in iTunes add folder to library and all your songs load up. This isn't moving the library but just backing it up.
You don't need to add anything.
Hold Option and launch iTunes.
Select Choose library... and select the iTunes folder you copied to the external.
You can delete then /Music/iTunes/ folder as this same folder was copied to the external and this is now your iTunes library.
You can also do this top make a backup of the iTunes library (thoug you should be making a backup (Time Machine or some other backup program) of yoru entire computer.

Dual Boot Arch & Mac OS X(Boot device didn't show up after 30 seconds)

I was trying to Dual Boot Arch & Mac OS X on my new Mac book pro, I followed the steps (https://wiki.archlinux.org/index.php/MacBookPro)
Dual Boot (Arch & Mac OS X)
Two possibilities:
- Install Bootcamp, resize the Mac OS X partition
When Mac OS X installation is finished. Go on http://refit.sourceforge.net and download rEFIT (Mac disk image)
To install rEFIT, mount the rEFIT.dmg file (it is normally automatic).
There is an other way (refer to rEFIT documentation) but you can open a terminal then you copy /Volumes/rEFIT/efi/ to /
# cp -r /Volumes/rEFIT/efi /
To install rEFIT :
# cd /efi/refit/
# ./enable.sh
Now we can synchronized MBR with GPT partition table thanks to rEFIT so you restart your computer. You can see rEFIT, you press down key to access to the Partitioning Tool. You press y to accept.
Put your Arch Linux CD in the CD-ROM drive first then restart the computer. You can press C to boot from the CD or you can choose it in the rEFIT menu.
Now it is the typical Arch Linux installation.
So I burn the archlinux-2010.05-core-i686.iso to an blank disc on mac then restart the computer , press C to boot from the CD.
After choose to boot Arch linux and then I got this
Waiting for 30 seconds for device /dev/disk/by-label/ARCH-201005...
ERROR:boot device didn't show up after 30 seconds...
Falling back to interactive prompt
You can try to fix the problem manually, log out when you finished /bin/sh: can't access tty;
job control turned off
[ramfs /]#
[ramfs /]#
Any ideas?
Thanks!

heleos wrote:
This line:
Waiting for 30 seconds for device /dev/disk/by-label/ARCH-201005...
You need to make sure that's the exact name of your iso disc. If it's not, it isn't a big deal. I've run into problems on this with my arch USB drive.
Once you get to the [ramfs /]# prompt, type in:
mv /dev/disk/by-label/(insert name of the current cd here) /dev/disk/by-label/ARCH-201005
exit
It should then be able to boot from the cd
did:
mv /dev/disk/by-label/(insert name of the current cd here) /dev/disk/by-label/ARCH-201005
exit
shows:
ERROR: mounting was successful, but /bootmnt/isomounts file doex not exist.
Then I checked:
cd /bootmnt
ls
archlinux-2010.05-core-i686.iso
exit
shows another problem /boot/init does not exist
exit
kernel panic!

My pre-order didn't show up and I enabled automatic downloads after I bought it.

My pre ordered song didn't show up in my library. Apple told me to enable automatic downloads, i did and it is still not showing. I've tryed downloads from the purchased page but there is no button saying download.

Make sure you're using the iPhone sync cable (older iPod cables will not work for sync, only to charge for example)
Try quitting iTunes, unplug your iPhone from your computer, reboot your machine, do not open iTunes, (with your iPhone awake) plug in your iPhone via the USB sync cable, iTunes should open with your iPhone as an accessory.
Sometimes things glitch :P

My Macbook Air 2011 got a white screen and a folder with a question mark. I tried to press option+r and try to install the OS X Lion but it didn't show the disk Macintosh Hd

My Macbook Air 2011 got a white screen and a folder with a question mark. I tried to press option+r and try to install the OS X Lion but it didn't show the disk Macintosh Hd

You are using Snow Leopard so you have no OPTION+R shortcut. You need to boot the computer from your Snow Leopard DVD or USB flash drive.
Reinstall OS X without erasing the drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.

Why this new version of iTunes doesn't have Album Art or It didn't show up?

Why this new version of iTunes doesn't have Album Art or It didn't show up?
Also, in my iPod Touch 4th, it erase all album art from my iPod, then i tried to put again a new Album Art, ...download again from the image sites and still ...it didn't show up.? What a waste!
I waste all my time to set all album art on my iPod, then it just gone. kindly pls fix this issue. hate this new version of iTunes, so complicated.
The first thing i saw after i install new version of iTunes, it showed only music files. I don't know where to look for the old version of Sidebar. I keep on trying to look for it where I can see or any sign off button just to show up this stupid SideBar. Also, why i couldn't find? The "Menu Bar" is also hide!
Until i found out in "View" tab. Then i saw the Show Sidebar. Question? why do you need to hide that Side Bar? For what?. it is so so so complicated specially to those people who can't relate for this. (Also the button (from previous iTunes) to show the Album Art, now it's gone. I check every Tab, but there's no way to see the Album Art.)
Another comment. I download also some of my songs to my iPod, I wasted my time to collect all of my favorite music files. Also some are came from CD's and friends. I had all that favorite music in my iPod. Then the version iOS 5.+ came then I updated my iPod, another options to save files (iCloud) but I think there are something that I MISS about updating my iPod. Then suddenly I checked my iPod... all music (with Album Arts) are gone. All Apps are Gone. Videos as well.
If you don't know how to use that iCloud (with only 5GB storage), you'll gonna miss/lost everything.
Then I start all over again, i still have my BACK UP, good to have that. Now it's all set until I update the latest iOS 6. And another version of iTunes.
Then I realized my computer getting slow. I uninstalled it. My laptop started to work fast again. Then I download again the iTunes. So now I know, it has the ability to slow my computer. Everytime I turn on my iTunes, it hang. (Not Responding). Solution... CTRL+ALT+DELETE. Then every second time to open the iTunes, and it works. (it means, to open iTunes, need twice)
Then suddenly my laptop is not working. All my files has been corrupted. My Hard drive doesn't work properly. Now I don't have any stupid BACK UPs. My music files usage is 18 GB, only contacts, documents, notes, or some other files that can only fit to your "iCloud" not my 18GB music files and other photos. Your solution is to BUY more storage. Another COST! Another wasting time to set everything then need to pay more?
If you let your unit (iPod,iPhone,iPad) to export music to PC, or any mini SDcard to use as storage, it won't happen.
There is another....
It has Bluetooth, right?
Use less! Doesn't work. There's no way to use it.
All I need is to install an application to use your bluetooth. (for same unit or Apple unit only). And pictures only can send via Bluetooth if you an application.
Even if you go to "Photos" check if there's a way to send pictures? there is no way to send via Bluetooth, even Photos, Songs.etc. It can't even share some other friends (even they have own iPad, iPod, iPhone or same products) who has a unit with Bluetooth.
And the last.. only one port. there's no way to watch videos through HDMI. No HDMI port, no SD or any card slot. Must to buy their products.
Very costly!
I know (like iPod) it's very friendly to use it, but you must spend more money first before it can use.

Yes, the old album art view is gone, bu you can see the album art for a song that's playing by clicking on the art image and it will open a bigger view.
Everything else in your post is a waste. I'm not going to spend time reading it. If - and I repeat if, you have a question on how to get the best out of the new look iTunes, post it. But don't spend your time in long rambling negative rants.

I had switches off my iPhone 5 at around 20 percent battery next morning I was not able to switch it on. I tried to get it charged but it didn't showed any sign of charging even when plugged in for about 2 hours. I had to take it to apple care centre

I had switches off my iPhone 5 at around 20 percent battery next morning I was not able to switch it on. I tried to get it charged but it didn't showed any sign of charging even when plugged in for about 2 hours. I had to take it to apple care centre but they refused to repair it after confirming the problem with the device as it was out of warranty and asked me to get it replaced for INR 22500. I got it repaired outside but after that also if I switch it off in the same situation it again happens and I have to take it for repair it has happened 3 times after that. Is it a inherent problem in iPhone that it uses battery even when switched off and if in that case battery drain out then refuse to get charged because this is the scenario i have experienced every time?

Apple told you it was unrepairable.... You had it serviced by an unauthorized party. It's now no longer eligible for out of warranty replacement by Apple.
There's really nothing else we can say about it. Find a competent 3rd party repair shop or buy a new one.

Warning messages didn't show up

Hello,
I am trying to implement modification, that posting in transaction VL02N will display warning message when budget is exceeded. Solution is attached to Note 985734 and described in Note 447102:
"However, if you use transactions MIGO, MB1A, VL01, VL01N, VL02 or VL02N to carry out postings, the CO checks run.
However, the posting is only then interrupted if the system issues error messages. In this case, all warning and error messages, in particular those of the availability control, are logged.
If the system does not issue any error message during the posting, but issues an availability control warning message, which is linked with an e-mail to the person responsible (this conforms to action 2 in the definition of the tolerance limit of the availability control), the posting is not interrupted as described above and the system does not issue an availability control warning message. However, an e-mail is sent to the person responsible."
I slightly modified the modification to include transaction VL02N and my problem is that after statement MESSAGE is executed, the message don't come up and the program flow continues and I don't understand why. Here's a link to youtube with my debugger: http://www.youtube.com/watch?v=N7aB0pzjLgs
Could someone explain me why the warning message didn't show up, please?
Thanks,
Pavel Kraxner
P.S. In the end of the video is a comment in notepad that error messages are working OK, which is correct, but they are executed at different place (AC_DOCUMENT_CREATE returns sy-subrc = 1 in contrary to Warning messages) .. on that particular place any message didn't show up and I don't know why..

there is probably a place where there is a CALL FUNCTION ... EXCEPTIONS error_message = ...
If any message is sent inside the function module (or in one of its called procedures, at any level), then these messages are ignored. That's explained in [sap library|http://help.sap.com/saphelp_nw2004s/helpdata/en/9f/dbaa0635c111d1829f0000e829fbfe/frameset.htm].
To check that, look at all the function modules which are displayed in the abap stack (in the debugger), and check how they are called.

Design view didn't show page

After making the simple tutorial about data binding
the visual editor didn't show the page and it's components.
I just report the bug.
Any suggestion ?
Thanks

I have same bug. The jsp page is there but cannot see any components and cannot modify design and code.
You can run it through project navigator.

Issues after returning from Leopard to Tiger, icons and iworld apps!

Hi
After headaches with Leopard i decided enough is enough and returned to Tiger to finish producing a music project.
I did erased teh drive 7 times pass, re installed Tiger and now it does hting i never seen before.
After several hours te icons get all fuzzy, some times i see the last application in the side bar as the icons for music, photos etc, even the drives look like iTunes or whatever app i last used.
Side bar also does not show hard drives at times yet they are on the desk top.
at some point its all nothing but the desktop, applications folders etc, not hard drives at all.
please advise anyone.

From your cell it is very expensive when you wait 25 minutes, i think all 902 are charge by the minute.,
The irony of Spain is that stores now use a 902 number to charge if you ask whats in sock as well! while the average person makes 1000€ and the costs of eveyrthing electronic is not converted from Dollars!
a $1500 mac a is 1500€ which really is 2000€, no tax breaks from shipping to another state, there are no other states but countries!

Downgrade from Leopard to Tiger after Built-In Keyboard Firmware Update?

Can I downgrade from Leopard to Tiger after having applied the Built-In Keyboard Firmware Update 1.0? This firmware update requires OS 10.5.2 or higher to be installed. Now that it is installed can I downgrade back to Tiger (10.4.11)?
I have a MacBook Pro 17 (late 2006). It ran perfect except for the occasional ignored first key press problem that these MacBook's have. In late December I upgraded to Leopard (10.5.6) and installed the Built-In Keyboard Firmware Update 1.0 that is suppose to fix the ignored first key press problem. Ever since then I have had constant keyboard & trackpad failures. When the built-in keyboard fails, thankfully I can still use an external USB or Bluetooth keyboard & mouse. I've tried everything. I've reinstalled Leopard four separate times, reset PRAM, reset SMU, repair permissions, pressure on the keyboard cable under the battery (even though I don't think this version of the MacBook has that problem). Nothing restored my internal keyboard and trackpad. During this process I tried to re-install the Built-In Keyboard Firmware Update using the original package file that I had downloaded, however I was given a message that the keyboard didn't need to be update because it already has the updated functionality and the installer package would then quit. Then I remembered that the original firmware update actually installed a Keyboard Firmware Update application in my Utilities Folder. When I ran the Firmware Update application in the Utilities Folder it instantly fixed my keyboard problem! Unfortunately the keyboard fix is not stable. It fails 2 to 3 time a week. Running the Keyboard Firmware Update application fixes the problem every single time, but this renders my MacBook useless as a portable (I have to have an external keyboard/mouse to run the Firmware application). I have, incidentally, tried all the other suggestions in the many keyboard threads in this forum (putting the computer to sleep, restarts, shut downs, PRAM & SMU resets, repairing permissions, running other applications, etc.), and nothing works except reinstalling the Keyboard Firmware Update using the application in the Utilities Folder. At this point I just want to downgrade to Tiger and go back to the way it was. I'll happily take the ignored first key press problem over a completely dead keyboard.
Please help.

Hi,
I was just wondering how you were able to get the macbook to accept the update? I had to take mine to apple store and get entire keyboard and trackpad replaced in my macbook. They then told me to ignore the update cause they did not have any other keyboards to replace if it happened again.

Crystal didn't show the BEx query Attributes description changes/Values

We experiencing the BEx query attributes/crystal report issue.
I create a crystal report using BW- BEx query. Bex query displays the attributes values. But in crystal report side it didn;t show up the values as well as description changes.
But If I change the display properties of attributes (different from one attribute to another) the crystal report reflect the values. But crystal report didn't show the Attribute description changes , the one i did it in BEx query side.
Example:
Bex has a Masterdata as well as attribute Field1, Field2 etc.. I changed the description like Field_Test1 and Field_Test2. Also I changed the display property for Field_Test1 is Key and text and long , Field_Test2 is Text & LOng text.
I got the attribute values is crystal report Xi R2. But crystal didn't reflect the description changes?
Suggestions Please?

Post your question to the Business Object Integration Kits forum

Hey there! So I plugged in my ipod to my computer and it didn't show up where it normally does. I need to update my song list. How can I make it appear? It doesn't come up in Iphoto. A few days ago my sispluggeditintoanothercomputerbutidon'tknowwhatshedid

Hey there! So I plugged in my ipod to my computer and it didn't show up where it normally does. I need to update my song list. How can I make it appear? It doesn't come up in iphoto either. A few days ago my sis plugged it into another computer but I don't know if she synched it to the other computer, and frankly, she won't remember. I have tried updating itunes, charging the ipod, restarting the ipod/computer, and the rest of what the apple site said to do. Ps I have the latest ipod touch
I need help stat! Please help!

I'd say your sister messed up and your iPod is toasted.
Think about it... She plugged it in to another computer, she doesn't remember what she did (yeah, right), and now your iPod is not being recognized by your computer...
Also take into consideration how old is your sister, and how much does she know about electronics?

Firewire HD didn't show in tiger after showing in Leopard

Similar Messages

Maybe you are looking for