Firewire HD External very strange

I have been using an 80gig Firewire external HD I purchased from Other World Computing for about 7 years. It's been a great piece of hardware. Lately, however, the HD icon doesn't want to show up on my desktop #1. I've changed firewire cords, and I've plugged the firewire cord into different female plug-ins, but sometimes the icon shows up and sometimes it does not, and sometimes it just disappears.
The really odd thing is, if I connect two DDR G4 computers together via a firewire cord, and the HD is plugged into #2, the HD icon will show up on #1, but not on #2. How can this happen??
That being said, when do I know an external HD is on it's way out? All the files have been transfered just in case. Is it possible to replace a HD reusing the outer case?
Both computers are using Panther, BTW.
Thanks for reading, seems I never run out of questions.
Patt
DDR G4 DP   Mac OS X (10.3.9)  

Basics of File Recovery
Files in Trash
If you simply put files in the Trash you can restore them by opening the Trash (left-click on the Trash icon) and drag the files from the Trash to your Desktop or other desired location. OS X also provides a short-cut to undo the last item moved to the Trash -press COMMAND-Z.
If you empty the Trash the files are gone. If a program does an immediate delete rather than moving files to the Trash, then the files are gone. Recovery is possible but you must not allow any additional writes to the hard drive - shut it down. When files are deleted only the directory entries, not the files themselves, is modified. The space occupied by the files has been returned to the system as available for storage, but the files are still on the drive. Writing to the drive will then eventually overwrite the space once occupied by the deleted files in which case the files are lost permanently. Also if you save a file over an existing file of the same name, then the old file is overwritten and cannot be recovered.
General File Recovery
If you stop using the drive it's possible to recover deleted files that have not been overwritten by using recovery software such as Data Rescue II, File Salvage or TechTool Pro. Each of the preceding come on bootable CDs to enable usage without risk of writing more data to the hard drive.
The longer the hard drive remains in use and data are written to it, the greater the risk your deleted files will be overwritten.
Also visit The XLab FAQs and read the FAQ on Data Recovery.

Similar Messages

  • Files transferred to external HD end up in trash - very strange issue

    Hi,
    I seem to be having a very strange issue, hopefully somebody can help or has seen this before.
    Hardware: MacBook Air, Western Digital Passport external HD, 250gb, formatted NTFS.
    Software: OSX 10.7 Lion, Paragon (allows me to write to an NTFS formatted HD)
    Issue Summary: I copy something to the external HD; I empty trash; the file I copied is deleted from the external HD. It doesn't happen every time.
    I do also seem to have a persistent folder in trash called "WD Sync Data" that won't go away unless I re-delete it as it's also in the root of the drive. Not sure if this is related somehow.
    Recently I copied 3 video files inside a folder to the HD, then disconnected the HD. When I reconnected it a while later and noticed that inside the "WD Sync Data" folder in trash were the 3 files I'd copied. I then looked inside the same folder on the root of the drive and the files were there, instead of inside the folder that I'd copied to the drive, which had vanished. If I hadn't noticed and had emptied the trash, those files would've been deleted.
    It's definitely happened more than once; last time I actually deleted the files from my computer after copying, then emptied trash, and they were gone from the external HD also.
    I've only found one person who seemed to be experiencing a similar problem back in 2010. It sounds similar though it could've been user error: http://www.mac-forums.com/forums/apple-notebooks/188224-weird-external-hard-driv e-trash-problem-help-please.html
    Has anyone experienced this or have any suggestions?

    Quick update: I ran a verify then a repair in Disk Utility as there were a couple of errors. Hopefully this has solved the issue, however it'd still be interesting to know if anyone's come across this before and what caused it?

  • Thunderbolt to Firewire 800 external drive problems

    I recently upgraded from a MacBook Pro 17" early 2011 to a MacBook Pro Retina 15" (early 2013).  I have a Drobo and two Seagate 4TB external drives, all connected via Firewire 800.  So, I added a Thunderbolt to Firewire 800 adapter and, it seemed, life was good.
    I keep my large iTunes Movie and TV show collection on the Drobo.  Since transitioning to the new MacBook, I have had a number of issue with watching movies on my Apple TV 3.  Randomly, and periodically, the movie appears to be corrupted - the audio track skips/loops and the image is horrible macroblocked, as if the file is damaged.  When I check the movies on the Drobo, opening it with Quicktime on the MBP, it plays just fine at the same spot it appeared damaged on the Apple TV 3.
    A second symptom is this: I can no longer re-encode video with Handbrake with the source and target files on the Drobo - it gets some portion of the way through and it just stops, leaving the video partially encoded; again, at random locations/offsets into the video and not the same spot twice.
    My initial thought is that connection to the Drobo is dropping out and coming back, on its own, but long enough to cause the above problems.
    Is anyone else seeing this issue or something related when using the Thunderbolt to Firewire 800 adapter with large drives?
    Thanks, in advance.

    Update: I exchanged the Thunderbolt to Firewire adapter and the issue persists. I have a Drobo that I used with my previous system, a PowerMac G5, and never had any issues like this.
    It does not matter what software I use. But at some point video playback will suddenly become garbled. If I start the video from the beginning, sometimes the garbled video will start sooner but never later. A restart temporarily resolves the issue. If I copy the file to the local hard drive the video will play back garbled. This is indeed a very strange issue. The issue behaves like a bandwidth bottleneck.
    I was having this issue prior to upgrading to Mavericks.
    Fred K
    iMac (Late 2012), 3.4 GHz i7, GTX 680MX, Fusion Drive, 24 GB RAM, Drobo (Firewire via Thunderbolt)

  • Very strange!! i got the old web?

    I have a very strange thing that happened and iam trying to figureout what is going on after i tried modifying tens or maybe hundreds of setting trying to solve it.
    I have a motorola sbg6580 for my home perimeter i have forwared port 80 to my webserver and it works fine jst like always.
    Now i also have an ASA 5505 which i configured for the webserver, after i put the webserver behind it the topology config was like this:
    motorola sbg6580>ASA>switch>webserver1+webserver2+laptop. (forworded port 80 from the moto to the ASA external interface).
    strangely, from the outside internet i can access only the old version of the website (i did updated the website the night before and it worked fine when connected directlly to the moto with out the ASA).
    Then i found out that the old version of the website (website contects before update) also exist on the other web server so i figured OK i forgot to stop the other server's website, but when i stopped the other server'ways website the same thing keeps happening..i get the old website.
    By the way (when i type the address of the intended website (ip address http://x.x.x.x) from a computer on the VLAN or the LAN I Get the updated view of the website and everything is fine, but when i access it from the internet i get the old unupdated view!!!
    After that i got the webserver off the ASA's network and connected it directly to the moto like before when it was working fine (and i did the port forwarding to the server again) i got the same problem again..i get the old view of the website not the updated when i try to open it from the internet,but when i open it locally from the LAN i get the new updated website with no problem.
    This got me thinking of three possibilities:(which are impossible to even think about):
    1-Is there some caching function of the webserver it self for the old website or some where on the network? (if yes then how come i can open it just fine and view the updated website from the LAN or from the webserver host it self?) so this might be impossible which brings the thought of the second and most likely possibility which is:
    2-The Motorolla router somehow have a malfunction wth it's forwarding capability (which is also not possible because when i send http request from the internet i do get the website but not the updated one but the old version which does not even exist on the server.
    3-The ASA firewall is somehow contagious!!!
    The question is (where exactly is this old website is view or layout is coming from after i tookout it's files from the server it self and replaced it with new files when are for the new updated website) , and how to fix it?
    This is the first time i see such a thing and i have been trying for hours and hors to solve it or see where the problem is (i suspect problem in the moto router)

    Apple has an out of warranty replacement program, the cost in the US is $199. I don't know if any original iPhones are still available under this program(remember, that phone was discontinued sometime ago), but even if they were, why would you spend $200 on a discontinued phone?

  • Very strange thing after 10.7.3 update?

    Very strange thing after 10.7.3 update?
    Everything seems to be working normal except the desk top BBC iPlayer which plays fine in a small window but when you go to full screen still plays the sound but the screen just goes black, no video?
    I thought maybe the update knocked off one of the plugins or players but reinstalled iPlayer and same problem, anyone got a workaround or suggestion as to how I can fix it, am I the only one?
    Full screen YouTube works fine.
    Everything else seems ok, maybe running a little hotter and the fans are kicking in a little sooner but does feel a little snappier.
    Thanks
    Phil

    Seems like they are on it
    http://iplayerhelp.external.bbc.co.uk/help/announcements/full_screen_mac_desktop
    I hope it doesnt take too long

  • VERY strange behavior - HELP!

    I don't know if anyone can help, but I have had some VERY strange Powerbook this afternoon while doing some Word processing. I was doing a quick search on the internet, when web pages would not load and applications became EXTREMELY SLOW. It was almost as if I had lost my internet connection, but everything was fully connected and fine. Anything action that I took brought up the spinning pinwheel of death. After force quitting all of my apps. and trying to restart, I continued to get the spinning wheel. After leaving the PB for nearly five minutes, the wheel was still spinning and restart did not happen.
    I finally held down the power button until it shut down. After restart, I repaired permissions and received the following, which I thought was strange:
    Disk Utility started.
    Repairing permissions for “Macintosh HD”
    Determining correct file permissions.
    parent directory ./Users/Shared/SC Info does not exist
    We are using special permissions for the file or directory ./Library/Widgets. New permissions are 16877
    Permissions differ on ./private/var/log/secure.log, should be -rw------- , they are -rw-r-----
    Owner and group corrected on ./private/var/log/secure.log
    Permissions corrected on ./private/var/log/secure.log
    We are using special permissions for the file or directory ./usr/lib/php/build/acinclude.m4. New permissions are 33060
    I understand the "special permissions" is due to the latest security update, but the secure.log concerns me. Any ideas?
    Here is part of the system log as well. Any help would be much appreciated. Based on the sys.log towards the bottom, it almost looks as if there was some kind of attempted security breech on the system?
    Thanks,
    Joe B
    Sep 24 18:46:44 localhost kernel[0]: [start] 1
    Sep 24 18:46:44 localhost kernel[0]: HFS: Removed 2 orphaned unlinked files
    Sep 24 18:46:44 localhost kernel[0]: Jettisoning kernel linker.
    Sep 24 18:46:44 localhost kernel[0]: Resetting IOCatalogue.
    Sep 24 18:46:44 localhost kernel[0]: Matching service count = 0
    Sep 24 18:46:44 localhost kernel[0]: Matching service count = 4
    Sep 24 18:46:44 localhost kernel[0]: Matching service count = 4
    Sep 24 18:46:44 localhost kernel[0]: Matching service count = 4
    Sep 24 18:46:44 localhost kernel[0]: Matching service count = 4
    Sep 24 18:46:44 localhost kernel[0]: IPv6 packet filtering initialized, default to accept, logging disabled
    Sep 24 18:46:45 localhost kernel[0]: UniNEnet: Ethernet address 00:0d:93:2e:08:f6
    Sep 24 18:46:45 localhost kernel[0]: AirPortPCI_MM: Ethernet address 00:0d:93:8c:43:18
    Sep 24 18:46:45 localhost DirectoryService[43]: Launched version 2.0.2 (v350.2)
    Sep 24 18:46:45 localhost diskarbitrationd[38]: disk0s3 hfs F03FF213-49C4-3229-9807-105BFEB2EF16 Macintosh HD /
    Sep 24 18:46:47 localhost kernel[0]: [HCIController][setupHardware] AFH Is Supported
    Sep 24 18:46:47 localhost lookupd[67]: lookupd (version 365) starting - Sat Sep 24 18:46:47 2005
    Sep 24 18:46:47 localhost mDNSResponder: Adding browse domain local.
    Sep 24 18:46:47 localhost configd[36]: WirelessConfigure: 88001003
    Sep 24 18:46:47 localhost configd[36]: initCardWithStoredPrefs failed.
    Sep 24 18:46:47 localhost configd[36]: WirelessConfigure: 88001003
    Sep 24 18:46:49 localhost kernel[0]: ATY,Jasper_A: vram [b8000000:08000000]
    Sep 24 18:46:50 localhost kernel[0]: ATY,Jasper_B: vram [b8000000:08000000]
    Sep 24 18:46:50 localhost /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow: Login Window Application Started
    Sep 24 18:46:51 localhost loginwindow[70]: Login Window Started Security Agent
    Sep 24 18:46:56 jbiedlin configd[36]: setting hostname to "jbiedlin.local"
    Sep 24 18:46:57 jbiedlin kernel[0]: AirPort: Link Active: "ARM Wireless" - 00112402fb57 - chan 1
    Sep 24 18:46:57 jbiedlin configd[36]: AppleTalk startup
    Sep 24 18:47:00 jbiedlin launchd: Server 0 in bootstrap 1103 uid 0: "/usr/sbin/lookupd"[67]: exited abnormally: Hangup
    Sep 24 18:4

    All,
    Sorry, I couldn't get all of the sys.log on the last post, so here's the part above where the log failed.
    Sep 24 17:42:55 jbiedlin configd[36]: AppleTalk startup complete
    Sep 24 18:46:44 localhost kernel[0]: standard timeslicing quantum is 10000 us
    Sep 24 18:46:44 localhost lookupd[44]: lookupd (version 365) starting - Sat Sep 24 18:46:44 2005
    Sep 24 18:46:44 localhost kernel[0]: vmpagebootstrap: 253637 free pages
    Sep 24 18:46:44 localhost kernel[0]: migtable_maxdispl = 70
    Sep 24 18:46:44 localhost kernel[0]: 95 prelinked modules
    Sep 24 18:46:44 localhost kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
    Sep 24 18:46:44 localhost mDNSResponder-107 (Mar 20 2005 20: 31:47)[46]: starting
    Sep 24 18:46:44 localhost kernel[0]: The Regents of the University of California. All rights reserved.
    Sep 24 18:46:44 localhost kernel[0]: using 2621 buffer headers and 2621 cluster IO buffer headers
    Sep 24 18:46:44 localhost kernel[0]: IOPCCard info: Intel PCIC probe: TI 1510 rev 00
    Sep 24 18:46:44 localhost kernel[0]: FireWire (OHCI) Apple ID 31 built-in now active, GUID 000d93ff fe2e08f6; max speed s800.
    Sep 24 18:46:44 localhost kernel[0]: CSRHIDTransitionDriver::probe
    Sep 24 18:46:44 localhost kernel[0]: CSRHIDTransitionDriver::start before command
    Sep 24 18:46:44 localhost kernel[0]: ADB present:8c
    Sep 24 18:46:44 localhost kernel[0]: Security auditing service present
    Sep 24 18:46:44 localhost kernel[0]: BSM auditing present
    Sep 24 18:46:44 localhost kernel[0]: disabled
    Sep 24 18:46:44 localhost kernel[0]: rooting via boot-uuid from /chosen: F03FF213-49C4-3229-9807-105BFEB2EF16
    Sep 24 18:46:44 localhost kernel[0]: Waiting on <dict
    ID="0"><key>IOProviderClass</key><string
    ID="1">IOResources</string><key>IOResourceMatch</key><string
    ID="2">boot-uuid-media</string></dict>
    Sep 24 18:46:44 localhost kernel[0]: Got boot device =
    IOService:/MacRISC2PE/pci@f4000000/AppleMacRiscPCI/ata-6@D/AppleKauaiA
    TA/ATADeviceNub@0/IOATABlockStorageDriver/IOATABlockStorageDevice/IOBl
    ockStorageDriver/FUJITSU MHT2080AT
    Media/IOApplePartitionScheme/Untitled@3
    Sep 24 18:46:44 localhost kernel[0]: BSD root: disk0s3, major 14, minor 2
    Sep 24 18:46:44 localhost kernel[0]: jnl: replay_journal: from: 6615552 to: 3109888 (joffset 0x8601000)
    Sep 24 18:46:44 localhost kernel[0]: CSRHIDTransitionDriver::stop
    Sep 24 18:46:44 localhost kernel[0]: [HCIController][start]
    Sep 24 18:46:44 localhost kernel[0]: [AppleUSBHCIController][StopIsochPipeRead] - mInt1IsochInPipe = 0 - numReadsPending = 0
    Sep 24 18:46:44 localhost kernel[0]: [start] 1
    Sep 24 18:46:44 localhost kernel[0]: HFS: Removed 2 orphaned unlinked files
    Sep 24 18:46:44 localhost kernel[0]: Jettisoning kernel linker.
    Sep 24 18:46:44 localhost kernel[0]: Resetting IOCatalogue.
    Sep 24 18:46:44 localhost kernel[0]: Matching service count = 0
    Sep 24 18:46:44 localhost kernel[0]: Matching service count = 4
    Sep 24 18:46:44 localhost kernel[0]: Matching service count = 4
    Sep 24 18:46:44 localhost kernel[0]: Matching service count = 4
    Sep 24 18:46:44 localhost kernel[0]: Matching service count = 4
    Sep 24 18:46:44 localhost kernel[0]: IPv6 packet filtering initialized, default to accept, logging disabled
    [ Edited by Apple Discussions Moderator; wrap long lines ]

  • Trackpad began to behave very strangely

    After installation Mac OS X v10.7 Lion on my MacBook Air trackpad began to behave very strangely. I just moving the pointer but it's clicking during the movings (closing windows, tapping links etc).
    So, how to fix it?

    48 hours ago, I installed Lion on my Macbook purchased in the spring of 2009.  Everything seemed normal, until I went to type.  Regardless if it was in Facebook to reply to a thread, Text Edit, Mac Mail, my cursor would erratically act possessed, cursor appearing in the middle of a blue highlighted portion of what I had just typed.  I was cursing my Macbook, wondering what on earth was wrong! 
    I should state that when I installed Lion, it was from Leopard.  I erased Leopard entirely from my hard drive from the Lion disk utility.  I did my updates.  Called Apple Tech Support today, ended up with a supervisor.  Both people I spoke to were terrific.  During this phone call, I was advised to reinstall Lion without erasing it from my hard drive.  Just to reinstall over the top of what was already on my hard drive.  Did this, and to my surprise two software updates arose for Airport Utility and iTunes!!  Did those updates.  It didn't require a reboot. 
    I still had erratic-possessed cursor problems.  At this point, I went to my iMac desktop, unplugged my new keyboard, and plugged the usb keyboard into my Macbook.  This worked beautifully.  At this point the lightbulb turned on.  With the wired usb keyboard plugged in, I shut down my Macbook.  I unplugged the USB keyboard, and rebooted my Macbook.  My Macbook keyboard, cursor, trackpad are now cooperating in the manner in which they should be. 
    I can only suggest to reinstall Lion, without reformatting your hard drive.  Check for updates.  Reboot.  Try my external USB keyboard suggestion.  GOOD LUCK!

  • 10.4.10 update and very strange problem with Mac Mini

    Dear All,
    I have just updated my Mac Mini Intel and I am having a strange problem.
    My Mac Mini has problems booting up. Sometimes I get through the login screen as normal but my wallpaper shows and there are no desktop icons, no dock, no top of screen finder menu bar. Some other times I get stuck in the progress bar of the booting up.
    I tried to run utilities from install disk and there were no problems detected.
    The VERY STRANGE thing is that several times now as I put my fingertip onto the power button laying it on the button but not pressing it yet (because I would like to shut down the system), the system kicks in and becomes unfrozen!!!
    Someone in the 123macmini.com forum says that this problem is related to the airport receiver which is near the power button.
    What do you think about it???
    MacBook and MacMini   Mac OS X (10.4.10)  

    ok, I have found a kind of fix for the problem, although may run a hardware test to check something!.
    I unplugged all USB and Firewire devices, I turned off Bluetooth and Airport, reinstalled the 10.4.10 combo update, when it restarted the starting mac osx screen took barely a second or 2 to load (my comment above is becuase from when I first got it on Sunday I noticed it was slow to boot up, also noticed that the screen resoulution I have set does not kick in until I log on, although this may be becuase this mac mini is an intel one). The computer booted up very quickly and I tuend on bluetooth and airport with no issues and plugged all the usb and fireware devices back in. I again turned the airport off and restarted and again it booted up very quickly logged on and swithced the airport back on. I decided to reboot with the sirport on and it got stuck at the end of the os x starting up screen, I waited a few mins switched it off and on again and it booted up fine although slower. I dont mind turning the airport off when I power down as the mac usually stays on anyway. I assume Apple will release a fix for this as a lot of people seem to have the problem so think I will stay put with this for the time being. It was taking a several goes to get to the login screen before but usually got there every few boots.

  • Help with getting values from request. Very Strange!!

    Hello,
    My very strange problem is the following.
    I have created three dynamic list boxes. When the user select
    the first list box, the second becomes populated with stuff
    from a database. The third becomes populated when the second
    is selected. Now, I have used hidden values in order for
    me to get the selected value from the first listbox. The
    following code is my first listbox:
    <SELECT NAME="resources" onChange="document.hiddenform.hiddenObject.value = this.option [this.selectedIndex].value; document.hiddenform.submit();">
    <OPTION VALUE =""> Resource</OPTION>
    <OPTION VALUE ="soil"> Soil </OPTION>
    <OPTION VALUE ="water"> Water </OPTION>
    <OPTION VALUE ="air"> Air </OPTION>
    <OPTION VALUE ="plants"> Plants </OPTION>
    <OPTION VALUE ="animals"> Animals </OPTION>
    </SELECT>
    I use the getRequest method to get the value of hiddenObject.
    At this time I am able to get the value of hiddenObject to populate
    the second list box.
    But, when the user selects an item from the second list box
    and the second form is also submitted,
    I lose the value of hiddenObject. Why is this??
    The code to populate my second listbox is the following:
    <SELECT NAME ="res_categories" onChange="document.hiddenform2.hiddenObject2.value = this.options[this.selectedIndex].value; document.hiddenform2.submit(); ">
    <OPTION VALUE ="" SELECTED> Category</OPTION>
    Here I access a result set to populate the list box.
    Please help!!

    Form parameters are request-scoped, hence the request.getParameter("hiddenObject"); call after the submission of the second form returns a null value because the hiddenObject parameter does not exist within the second request.
    A solution would be to add a hiddenObject field to your second form and alter the onChange event for res_categories to read
    document.hiddenform2.hiddenObject.value=document.1stvisibleformname.resources.option[document.1stvisibleformname.resources.selectedIndex].value;
    document.hiddenform2.hiddenObject2.value = this.options[this.selectedIndex].value;
    document.hiddenform2.submit();You will then come across a similar problem with your third drop-down if indeed you need to resubmit the form...
    A far better approach would be to create a session scoped bean, and a servlet to handle these requests. Then when the servlet is called, it would set the value of the bean property, thus making it available for this request, and all subsequent requests within the current session. This approach would eliminate the need for the clunky javascript, making your application far more stable.

  • Address Book behaves very strange

    Hello members and outside viewers,
    First thing: My Address Book behaves very strange.
    - After startup, the window freezes. Only if I minimize and click again, works OK. I began used to it, BUT
    - Since yesterday, Addresses gone, disappeared from every entry.
    - Under Preferences » Address Format is uneditable, it has "Item3" in it, unclickable drop down menu.
    - Under Preferences »Template » Add Field several options are grey: "Phone", "Email", "Related Names", "Instant Messaging", "Address".
    Please can you help me! I deleted both plist files from Preferences folder and deleted the whole folder under Application Support/AddressBook, also reinstalled Address Book from Leopard DVD, but nothing helped so far.
    Second thing: when I invoke Spotlight, and start typing after 2-3 seconds, it quits and also Dock unusable, restarts automatically. Spotlight is useless, it behaves every time like this. Spotlight in Finder windows are OK, system-wide menubar has this error. Also, it was suddenly gone wrong like Address Book. Can I think of some virus?
    P.S. (off topic), might helpful to share: very frustating, that registering to Discussions took me over an hour.
    - With Safari 4.03 the "Name" and "AppleID" are blank fields on "Create New User Account", therefore impossible to proceed. ( Error: invalid AppleID. Please login with a different AppleID )
    - With Firefox you can actually see them, but "?" instead of accounted letters.
    - After changing My Info, I finally realised that Apple ID should be complete e-mail address.
    - That means my "visionfresh" account is totally different from "[email protected]" (or me.com, whatever..)
    - Not to mention that I created a new Apple ID, that was also not working.
    - Bottom line: my "[email protected]" account is working also in Safari after editing my Name (replace accented characters), but I could not proceed with the nickname "visionfresh", I chose "matyashuszar".

    {quote:title=Console.App shows this when starting Address Book}
    2009.09.03. 18:45:48 Mail[228] SyncServices[ISyncSessionDriver]: Caught top level exception: I/O error for database at /Users/matyashuszar/Library/Mail/AvailableFeeds. SQLite error code:1, 'SQL logic error or missing database' Stack trace: (0x91ffcfeb 0x966c4e3b 0x92071f1a 0x920713f8 0x9206d18b 0x920a2e40 0x92097c2d 0x920977da 0x92077001 0x38767c 0x38758d 0x38751a 0x92061302 0x920a7260 0x920a6ad4 0x920a67ff 0x920633c8 0x92062f99 0x92061ea0 0x387303 0x38748e 0x1627da55 0x94ddd1e8 0x94dc923d 0x94e632cb 0x904d1dfd 0x904d19a4 0x95d56155 0x95d56012)
    2009.09.03. 18:51:27 Address Book[6144] -[ABAddressBook setDefaultCountryCode:] called with unknown country code 'us'
    2009.09.03. 18:51:27 Address Book[6144] NSScanner: nil string argument
    2009.09.03. 18:51:27 Address Book[6144] * -[NSCFArray insertObject:atIndex:]: attempt to insert nil
    {quote}
    Please help what to to do!

  • My iPhone is saying its taking up 10g of photos and I only have 154 pictures. Also when I got my screen fixed I had 2,000 and when I got it back I had 0 but my wallpapers remained.. Very strange. It's as if my phone still has the pictures but I can't see

    My phone is saying all my storage for pictures is taken up when I only have 154 picture.. It happened when I got my screen fixed at a kiosk in a mall and I had 2,000 pictures when I gave it to him and when I got it back I had 0 but my wallpapers remained.. Very strange it's as if my phone still has the pictures on there.. But I can't see them. Anybody know what I should do :( I keep having to delete apps because I have no more storage for no reason :(((

    You may have to try deleting all the music from your phone (by going to Settings>General>Usage>Music, swipping All Music and tapping Delete), then sync it all back on with iTunes in order to fix this.

  • Very strange error: unable to activate any messgae mapping in IR

    very strange error,
    i m unable to activating any message mapping in IR,
    while activating the error thrown was:
    /usr/sap/XID/DVEBMGS00/j2ee/cluster/server0/./temp/classpath_resolver/Mapdddd0cb0100311dca6090012799eddc6/source/com/sap/xi/tf/_MM_sdptestFileToFile_.java (No such file or directory (errno:2))
    My observation:
    On looking at the error, i found that the folder Mapdddd0cb0100311dca6090012799eddc6 is not created at the proper place.....
    Which i assume is created dynamically created on activating a message mapping,
    Now, i saw that the directory in which these Map* folders were created, already contained 32765 folders....... since this machine is UNIX, the max no. of directories that can be inside a directory cannot be more than 32768(not confirm).....
    hence the folder Map* cant be created at the proper place...and hence message mapping cant be activated.........
    ever encountered this problem....................
    pls help

    solved by self,
    solution: delete temporary folders created during any activation of message-mapping in IR, in the classpath_resolver folder of XID HOME directory......
    solution is specific to file system/OS....

  • I use an iPhone since several years and it was recognized as a camera by my PC. I have recently switch my PC of an iMac and now my I phone is no longer recognized. Very strange concerning two apple products wich ara supposed to match perfectly together.

    I use an iPhone since several years and it was recognized as a camera by my PC with no problem. I have recently switch my PC for an iMac and now my I phone is no longer recognized. Very strange concerning two apple products wich are supposed to match perfectly together. Can anyone help?

    Did you try the suggestions in this article? iPhone not recognized in iTunes for Mac OS X

  • Firewire 800 external drive no longer mounting

    My firewire 800 external hard drive is no longer mounting on my MBP. It powers up, spins, but has no reaction to being plugged into my computer. I've tried connecting it and the turning it on, and connecting it while it was already turned on. I've tried different cables and different types of adapter cables (fw800 to 400, fw800 to USB, etc.), but there is no communication between my drive and my Mac. Same goes if I connect it to my wife's Macbook, or my iMac at work.
    I recently had the logic board and left i/o board replaced on my MBP, I'm not sure if this is relevant since the drive has worked since the replacements and I get the same results on other Macs.
    What should I do next?

    who makes the drive set up?
    OWC for example has a history of bad power supplies that make the drive not accessible (drive spins up but never spins all the way up)
    -matt

  • Can I Boot my PB from a Firewire 800 External HD?

    I'm a going to buy a portable external HD for my mirror (clone) back-up drive.
    I can buy either a Firewire 400 ("Combo case") or 800 ("Triple case") HD. My inclination is to buy the Firewire 800 ("Triple case") drive as it will be more useful in the future.
    Will I be able to Boot my Firewire 400 PB from the Firewire 800 External HD as long as I have the right adapter cable? Or do I have to get a Firewire 400 instead?
    The drives I have in mind come from OWC and have a port for an external power supply if it's needed.*
    * http://eshop.macsales.com/shop/firewire/on-the-go, to see where I'm going with this.

    Moot Question.... No further need to answer!!!

Maybe you are looking for