Firewire Help For Total Lamebrain Needed

I have an iMac that has been having problems and have purchased a Firewire HD. I transferred my information over to the external, but I don't think I've done it correctly. Someone suggested that my main operations program (I think that's what they called it) was not on the Firewire HD. I want to boot up from my Firewire for now until I can get the problem with the internal HD resolved. However I need to know how to put the system I need on the Firewire in order than I can boot up from there. I have been having to start up my computer using a "safe" boot because of kernal panics. I am in the process of straigtening that out, but I need to use the computer for a couple of hours using the Firewire. I hope this makes sense. As I mentioned I am a total lamebrain and if someone has the step by step way to do this and can help me out I will bake my next cake in your honour. Thank you in advance.
iMac Mac OS X (10.3.9)

You can do as suggested and user superduper (or carbon copy cloner) to replicate your internal drive to your external. If the issue you are having with your internal is software related, you might just end up moving the problem over to your firewire drive.
You can always just use the install dvd and do a new system install onto you firewire drive. This way you will be sure not to move you problem over from the internal drive. If you do this, you need to format your firewire drive using disk utilities (in the application/utility directory). There is an option you need to select to allow the firewire drive to boot the system. It is the partition scheme called GUID.
Either way you go (superduper or new system install), you need to format the firewire drive to the guid scheme.
Hope this helps.
Glor

Similar Messages

Need help for total of Dr and Cr. in report painter

Hello friends,
I have created the trail balance in report painter. In table faglflext table. I created the common column of debit and credit cumulative balance and then separated the problem is I am not getting the
total of all the debit and credit amount.
Please help....

solved

Help for total count in a month

Hello everyone,I am reposting this message with the hope that I will get some help. Please help me I have a deadline to meet and maybe getting late in meeting the deadline.
Sometime back I had posted about the date function. I have that problem solved now my problem is that after finding all records which against each record I need to find the total count for that month if no records than I have to set it to a 0.
Here is how my program has been written.
PROCEDURE extract_materials
IS
CURSOR xyz
BEGIN
FOR xyz1 IN xyz LOOP
-- once inside the loop for each of the record from
the cursor I need to find a total count for that record for everymonth in the year.
All these records will be instered in to a staging table
Can you please help me out with this. I really appreciate this.
Thanks in advance

Take a look at analytic functions-- they should be just what the doctor ordered.
Justin

C or C++ compiler (or even editor with some help) for OS X needed

Hey,
I would like to learn C and C++ and am looking for a compiler for OS X that generates executable files. An editor that helps you a bit would be even better. Does anybody know any kind of software for this? Maybe even freeware?
Thank you,
Jerome

It's called Xcode. It's supplied by Apple with every machine on the OS install Disc.
Put your OS X install disc in the drive and look for the developer tools package. It might be in a folder like 'Optional Extras'.
...or if you can't find your disc (or just want a newer version) you can get it from http://developer.apple.com/technology/xcode.html, but you need to create a free account.

Problems with starting jstart.EXE (help for/from anyone needed!)

Dear all,
the last days I have spent some time trying to install CE7.1 and also CE711 EHP1. The installation itself worked great: no errors were reported during intallation. But somehow the instance CE1 never starts up completely. As I have found out, and so do many many many others, the problem lies in starting "jstart.EXE" (Please check your SAP Management Console: CE1 => matrix 0 => Process List).
The following behaviours I have monitored:
1. When trying to start the CE1 instance jstart.EXE tries to start but stops after a while. So the J2EE Server is not started. This behaviour is monitored and reported by many posts here at SDN, but it seems that "final" solution has been posted, which is valid for anyone. At least non of the hints could help me.
2. I have monitored that the status of jstart.EXE seems to hang at status "Starting the processes" (I have waited more than 25 minutes).
To all the experienced and anyone else:
PLEASE post all you hints here! This issues seems to be a very common issue and is not really solved. Other posts did not help me so far.
In my case (case 2 from above) I can provide the following information:
Today (December 3rd, 2008) I have installed CE7.1_SR5. Hardware requirements are fullfilled by 100%.
I have to mention that I have installed some old CE or NW J2EE version on the same system like about one year ago, and I uninstalled it after only one week.
Maybe what the jstart.EXE problems are somehow related to the license: does the "uninstallation" leave some data back in the system, which could be used by later installs in order to check the license (wich is only a 90 day license)?
Who can help?
What is your experience with jstart.EXE?
Any help is very welcome. I am sure not only for me!
Thanks,
Pars

Hi,
OK, if jstart in the "Process List" has status status "Starting processes" I guess what you have to monitor is the "AS Java Process Table". It should show which processes are being started at the moment.
If I remember correctly the first in this list are offline deployment/bootstrap (which need to run to prepare the instance after updates). After that two processes should be started: the icm and server0 (if you have created more nodes there might be more serverX processes).
So which one really fails? If it runs for long time and then goes down I suspect it might be server0 (that's the actual java server process). In this case you'll want to check for errors in <drive>/usr/sap/<SID>/JXX/work/_server0. files or the default trace.
Another way to determine what goes wrong might be to check the <drive>/usr/sap/<SID>/JXX/work directory. If you sort traces by date you'll probably get some idea. dev_<process> are the jstart output, the std_<process> is the actual stdout of the process, if the process failed probably the std file contains some more information on why it happened.
If you cannot find the problem is there a way to share the last files from the work directory. If it's a common problem we must identify and add it to the TS guide ...
Best regards, dido

Little help for a novice - Need a ps script to list user with their email only.

Hi,
I need to extract every month the user list which have their email information on it, so i don't need to extract the user services etc from the AD.
Today, i'm using this script i made :
clear-host
Import-Module activedirectory
$CurrentDate = Get-Date
$CurrentDate = $CurrentDate.ToString('dd-MM-yyyy')
Get-ADUser -Filter * -server ad.test -SearchBase "dc=ad,dc=test" -Properties DisplayName,sn,givenname,Company,Description,EmailAddress | select DisplayName,sn,givenname,Company,Description,EmailAddress | export-clixml "C:\users_$CurrentDate.xml"
But like this i have every user of the ad even the ones without email.
Is there any filter to only extract theses one ?
Thanks for your help.

Hi,
Try this:
$CurrentDate = (Get-Date).ToString('dd-MM-yyyy')
Get-ADUser -Filter "mail -like '*'" -Server ad.test -SearchBase "dc=ad,dc=test" -Properties DisplayName,sn,givenname,Company,Description,EmailAddress |
Select DisplayName,sn,givenname,Company,Description,EmailAddress |
Export-Csv "C:\users_$CurrentDate.csv" -NoTypeInformation
Don't retire TechNet! -
(Don't give up yet - 12,420+ strong and growing)

SCCM 2012 Compliance 7 Customize for Total Updates Needed

I can't find single report in SCCM 2012 that lists the total count of updates needed for each computer. This really irks me and many others as this and similar info was readily available with the old WSUS console. It also takes a lot more
clicks to get the same info in SCCM (if SCCM even has it) as it did in WSUS. Anyway, I've decided to try to customize an existing report. I made a copy of "Compliance 7 - Computers in a specific compliance state for an update group (secondary)".
Try as I might, I can't get the query to work right to create a field for number of updates required for each computer. I'd really like columns for Failed/Needed/Applied but I'll start with just Needed. Why they got rid of this in SCCM reporting baffles me.
I have several SQL queries that pull this info for needed patches when run in Management Studio but I can't get them to work in a SCCM Report. Does anyone know how to do this?
Ben JohnsonWY

I'm looking at Compliance 1, 5, and 7. The closest to what I want is Compliance 7 but with a new column for "Required Updates". I have that column made but it's not populated. I have a "Required Updates" Dataset now inside this custom
report. BUT the row of info in the table (computer name, last logon, etc) only lets you select fields from Dataset0. Where I'm stuck is how get to the "Required_Updates" field from the "Required Updates" dataset to appear in Dataset0.
I've spent a big chunk of time trying to get the code from the two queries merged but I can't get it to work. The other option is to somehow get the field to appear in the row's field selection list (ie, read field from both datasets).
Oh, and when I followed your steps above, I got the report created but it throws and "error during processing" error when I run it.
Ben JohnsonWY

Help for trail version needs to be re-installed

I did a sytem restore and I don't see a button to re'-install or the link that says intalled doesn't reinstall the program. thanks for your help

Which software are you trying to install?

Some array based help for a beginner needed.

Hello there.
I have an array, initialised like..
int numbers[] = {12, 15, 67, 18, 29, 40, 23, 4, 59, 5 } ;
and wish to print out a line, which has the sum of these numbers, and the average of them.
any help will be greatly appreciated.
Thanks

So what's the problem?
How would you do it manually? Write that down in very simple, precise, small steps. Then translate those steps into Java code. Post your best effort and specific questions when you get stuck.

Still need Help for what Firewire to get for Envy h8-1534 PC Help please

I bought a 3 port PCI Express Card from Belkin and it does not engage the software installation ? Can someone help me on this is there a difference in WIndows 8 or 8.1 as concerns the firewire help please. HP used to be so easy plug and play !
Shold I have only got 1 slot ?
Model number h2n64aa#aba

Hi,
It's NOT compatible with Windows 7 therefore may NOT compatible with Windows 8 & 8.1:
http://h30434.www3.hp.com/t5/Desktop-Hardware/Belkin-firewire-express-card-F5U504-Not-compatible-wit...
Can't find driver for it:
http://www.driversguru.com/manufacturer/Belkin-pid-R%3E4191840%3E4192032%3E4201214
You may need a right one.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

What is FireWire and what FireWire adapter do I need to use FireWire 800 for my portable external hard drive ?

Hi guys, I'm new to Mac. I have a MacBook Pro 13" (late 2011) with Lion OS and Parallels 7 (Windows 7). My understanding is that there is FireWire connection / extension built in to the MacBook Pro already. I also have a Seagate FreeAgent GoFlex portable external hard drive 750GB USB2.0 and 3.0 (that can be used for PC and Mac). It states that the portable external harddrive is FireWire 800 compatible. The questions are (1) how does FireWire works ? (2) how do I use or activate FireWire 800 ? (3) is there any setup / setting changes I need to on my MacBook Pro ? (4) what FireWire adapter do I need to purchase to connect my portable external harddrive to my MacBook Pro ? Is it expensive ?
I read a few articles online but they are too technical for me. They mentioned something about FireWire adapter with 6 pins or 9 pins. Not sure what that means. I'm totally confused. So any help, advise or guidance will be much appreciated. In Layman's term would be better. Thanks.
How about Thunderbolt ? Is it compatible with the above external portable hard drive mentioned ? Do I need a Thunderbolt adapter for it ? How do I activate or use Thunderbolt ?

Thanks, Clinton and Alberto.
The below link is the Seagate FreeAgent GoFlex portable external hard drive (product code STAA750302) that I have. It states that it features USB 2.0 or 3.0 plug–and–play connectivity and easily upgradeable to USB 3.0, FireWire 800 or eSATA. It only comes with a 18-inch USB 3.0 / 2.0 backward compatible cable.
http://www.seagate.com/au/en/external-hard-drives/portable-hard-drives/standard/ goflex/
Based on the above, my understanding is that I need to buy a FireWire 800 adapter to connect to the portable external hard drive so that I can use FireWire 800 with my MacBook Pro. Is this correct ? Do I need to get a separate cable as well or can I just use the 18-inch USB 3.0 / 2.0 backward compatible cable that was provided in the box ? If so, what sort of FireWire 800 cable do I need to get ? 9 pin to 9 pin ? 6 pin to 9 pin ? Or 4 pin to 9 pin ?
https://www.lindy.com.au/online/arrshop.exe?anonymous=true&cat=b1

Need help for array counting

Any help for array question
Hello to All:
I want to tally or count some of the elements that I have in array but not sure how.
I have for example: int myArray[] = {90,93,80,81,71,72,73,74};My objective is to tally all of the 90's, tally all of the 80's and tally all of the 70's.
So, the result that I want to have would look something like the following:
System.out.println ("The total tally number of 90's is " 2 );
System.out.println ("The total tally number of 80's is " 2 );
System.out.println ("The total tally number of 70's is " 4 );I do not want to add these numbers, just want to count them.
Also I want to use a "forloop" to achieve the result intead of just declaring it at 2 or 4 etc..
Any help Thankyou

[u]First , This is not exactly what I have to
do for homework. There is a lot more, a lot more
involved with the program that I am working on.
Second, this is an example, an example, an
example of something that I need to achieve.
Third, you are asking for a code, to me that
sounds as if your asking for homework. Fourth,
I did not ask for any rude comments. Fith, in
the future please do not reply to my messages at ALL
if you can not help!!!!
Sixth, We did not ask for lazy goofs to post here.
Seventh, In the future please do not post here. Take a hike - there's the virtual door.

Need help for flash builder

i need help for flash builder 4 and papervison 3d. I need to create a slider with it ranges of value from 10 to 50 to adjust the camera values for the camera.fov and also need to create it for the yaw of the object from 0 to 360. I try to look for any slider event and classes in this program but cant find any, btw, i need to use the AS only project file.
here is my codes:
can you please tell me how i should modify the codes?
package
    import flash.display.BitmapData;
    import flash.display.Sprite;
    import flash.events.Event;
    import org.papervision3d.materials.BitmapFileMaterial;
    import org.papervision3d.materials.BitmapMaterial;
    import org.papervision3d.objects.primitives.Sphere;
    import org.papervision3d.view.BasicView;
    [SWF (width="800", height="600", backgroundColor="0x000000",frameRate="30")]
    public class EarthBitmap extends BasicView
        private var sphere:Sphere;
        public function EarthBitmap()
            super(800 , 600);
            var earthmaterial:BitmapFileMaterial = new BitmapFileMaterial("../assets/Earth.jpg");
            sphere = new Sphere(earthmaterial,100,20,18);
            camera.fov = 25;
            scene.addChild(sphere);
            addEventListener(Event.ENTER_FRAME,rotateSphere);
        public function rotateSphere(evt:Event):void
            sphere.yaw(0.2);
            singleRender();

Turn the click handler into a full on separate function. Then store all the views in an array and use Math.rand() to randomly choose one.
Something like this:
<fx:Script>
     <![CDATA[
          var questionsArray:Array = {question2,question3,question5,questionRed,questionGeography};
          function buttonClickHandler(event:MouseEvent){
               var randomProblem:int = Math.floor(Math.random()*(questionsArray.length));     //generates a random integer between 0 and the total number of questions in the array (arrays are 0-based)
               navigator.pushView(questionsArray[randomProblem]);
     ]]>
</fx:Script>
<s:Button id="randomProblemButton" label="Next Problem" click="buttonClickHandler(event)" />
Haven't tested that, but something along that line should work

Need help for writing extract program

hi
i need help for writing extract program to retriew data from legacy system.
i already developed bdc programs for me31k and me21.
my requirement is to write extract program s for those t.codes.
to retriew data from legacy system and stored in flat file.

i need help with a java program. it is a program that allows the user to enter a student's GPA, number of extracurricular activities, and number of service activities. The user can not enter a gpa above 4.0 or below 0. The user can not enter a negative number for the number of both activities. If the student meets the following criteria: 1) GPA of 3.8 or above and at least one extracurricular activity and one service activity, 2) GPA below 3.8 but at least 3.4 and a total of at least three extracurricular and service activities, 3) GPA below 3.4 but at least 3.0 and at least two extracurricular activities and three service activities, the message "Scholarship candidate" should display. If the student does not meet the criteria above, then the message"not a candidate" should display. Can you help me, please?
You haven't posted ANY 'java program' for us to help with.
The forum is NOT a coding service. It is to help you with YOUR code.
Post the code you have written and SHOW us (don't just tell us) how you compile it and execute it and the results you get. Then we can help you with any problems you are are having.
If you need help understanding just what the program should be doing you need to ask your instructor to clarify the assignment.

Need bootable external Firewire drive for iMac G5

I need an external Firewire drive for an iMac G5 PC with OSX leopard that I can format to be BOOTABLE. Don't know where to buy one or even if they're available. I've bought 3 different drives on eBay, thinking each was what I needed, and none were.
I'm frustrated.
Would appreciate. Any helpful info.

I use this one:
http://eshop.macsales.com/item/Other%20World%20Computing/MAU4S7H20T64/
and SuperDuper for creating a bootable clone.
(But there are others too: http://eshop.macsales.com/shop/firewire/1394/USB/EliteAL/eSATA_FW800_FW400_USB )

Firewire Help For Total Lamebrain Needed

Similar Messages

Maybe you are looking for