Firewire Hub + iPod + Ext. Hard Drive?

Ok, So I have a little bit of a problem. I have a 60gb ipod and the harddrive on my Mac is also 60GB. But, of course, the laptop's harddrive has, oh, other things like an OS and, oh, photos.
Say it with me: I need storage.
I have a Titanium Powerbook that has two USB 1.0 ports and one Firewire port. I would like to hook up a Firewire Hub to the Firewire port and plug an external harddrive as well as the iPod. i will have the iPod sync with music files stored on the external drive, not on the laptops drive.
Will this cause any kind of Synching issues since both things are on the same single Firewire port on the laptop?
Or does the synching work seamlessly through the hub?
gm.

There's no problems at all with this type of setup.
It should work just fine.

Similar Messages

I have 3 older ext. hard drives that I've utilized many times. Today while searching for old files, one of the three is no longer recognized by my PowerMac. Any suggestions?

I have 3 older ext. hard drives that I've utilized many times. Today while searching for old files, one of the three is no longer recognized by my PowerMac. The drive is not listed in Disk Utility. Any suggestions?

Is the computer in you equipment line:
Dual Core Intel Xenon
(which is not a PowerMac but a Mac Pro) the one you are asking about, or do you have an older PowerMac?
If a Mac Pro, their forums are here:
Mac Pro
and, as Mac Pros have a totally different architecture from the pre-2005 Macs this forum covers, you may not have the same issues that can affect the older models. If someone didn't notice your equipment line, you could get advice that doesn't apply.
If you really have a pre-2005 PowerMac, read on.
If the stubborn external is USB and does not have its own power brick (i.e., it gets power only from the computer's UBS ports--"bus powered"), it may not be getting enough power. As electric motors age, they can demand more power than when new, and the power available on any USB port is limited.
The typical workabouts to making a computer recognize an aging, bus-powered USB drive are:
Get a powered USB hub (has its own power brick
Get a "Y" USB cable: 1 Meter USB 2.0 A to 5 Pin Mini B Cable - Auxiliary USB "Y" Power Design for external hard drives.
The second gets power from two USB ports on the computer and often that's enough.
Remember that the USB ports on your keyboard seldom provide enough power even for a thumb drive, so be sure to use the USB ports on the back of the computer.

My photos are stored on ext. hard drive, and now I can't see them

I recently moved all of my photos over to an external hard drive, and have been quite happy with the freed up space on my ibook. I have been able to view them flawlessly until a few nights ago. Our power went out, and then came back on (yes, I know I should have a battery back up), so of course the ext. harddrive turned off with unmounting, and since then, I cannot view my photos in iphoto. There is still the correct picture count registering, however in place of all of my photo thumbnails in IPhoto, now I am only seeing grey boxes in the same shapes as the thumbnails. I have tried everything, including unmounting the ext. hard drive. I am at my wits end and have been working too much to go into the genius bar.
Anyone have any suggestions?
Thanks,
Jerrod

Hi Jerrod,
A couple of things for you to try:
-Launch iPhoto with the Option key depressed and choose to open another library. Navigate to the one on the external and choose it.
-Delete your iPhoto Preference file
Preference file
-rebuild your library
Try this:
Before doing a rebuild make sure iPhoto's trash bin is emptied. You can do this by control clicking on the trash bin, or from the menu bar under iPhoto.
Close iPhoto
Duplicate the iPhoto Library folder
Drag the duplicate to the desktop (hopefully you have enough room on your hard drive for the duplicate.)
Launch iPhoto holding down the Command and Option keys until you see the rebuild options screen.
Choose the first three options. If you were missing photos in your library, also choose the last option. Be advised that you will get a roll of orphaned photos and it might be quite huge. Most of them will already be in your iPhoto library, but use caution when deleting anything from this roll until you are sure the photos are still in your library in another place. It might be a good idea to share/export this roll of photos just in case you need to import them again.
Back to the rebuild, depending on the size of your library it might take some time. When it is done, hopefully your photos will be there.
You might see some unexpected results as I did when I did a rebuild. Photos had been moved to wrong dates, video clips had lost their duration info and some were even orphaned from the jpg pointer file. It took me some time to straighten it out again.
This is the reason to make a duplicate before you rebuild, in case you do not like the result. If you don't like the result, close iPhoto, then delete the rebuilt library and drag the duplicate back into the Pictures folder making sure the name is iPhoto Library. Launch iPhoto and it should open the library in the Pictures folder.
iPhoto 4 or later: Rebuilding the iPhoto Library
-Navigate through the iPhoto Library folder and make sure your images are still there and open when double clicked.
This is a view of how the iPhoto Library looks in the Finder.
It is organized by Year folders. Inside the Year folders are Month folders. Inside the Month folders are the days of the Month. Inside the day folders are the photos you took on that day. If you imported video clips and RAW files on that day they will be in an Originals folder. If you have edited any photo imported on that day, the original will be in that folder also.
Please get back with the steps you tried and the results.
If none of these suggestions work, you can create a new library and import from the old.
Close iPhoto
Rename your messed up iPhoto Library to "iPhoto Library_old"
Drag this library to your desktop
Hold down the Option key and launch iPhoto
This is the window you will get
Create a new library or choose a library to open
Choose to create a new library
Once this new empty library is open it is time to import the images from your old library
Go to File>add to library
Navigate to the old library on your desktop and choose it.
iPhoto will start importing the images from your old library
This is what to expect:
Your images will be imported in nice dated rolls. (make sure your view is set to sort by rolls to see it) There are a couple of caveats to this. You will get rolls named "Originals" These rolls will contain your video clips and your original images that you had edited. If you had RAW files they would be in those rolls too (I don't do RAW, so I don't know for sure) Delete what you don't want from those rolls. You will also get the jpeg pointer files to your video clips imported. They will just be jpegs and will not point to the video clips anymore as iPhoto made new ones when the clips were imported again. You can delete those. they should be in a roll right next to the newly imported video clips so they are not hard to find. The thumbnail files don't get imported as iPhoto makes new ones when the images are imported.
Once all you images have been imported, check through the library and make sure everything looks ok.
You can now start making your Albums, and do your keywords or any other organizational steps.
You can also delete the old library on the desktop.
It is also a good time to backup this new library to CD/DVD by burning the iPhoto LIbrary folder in the Finder, or copying the iPhoto Library folder to an external drive formatted for Macs, or copying the iPhoto LIbrary folder to an iPod.
Good luck!
Lori

ITunes can't "see" music on ext. hard drive....have to manually find

I have had my music/movie library (approx. 50gb) stored on an external hard drive and have been managing the music with iTunes for my iPod.
Now, for some reason, approx. 75% of my library has an exclamation point next to the song name on iTunes indicating that the song cannot be located.
Is there an easier way that manually searching file by file to show iTunes where these songs are located on the ext. hard drive?????
This would take hours and hours.
I am somewhat desperate and am hopeful that anyone with advice can't respond.
Thank you.

I don't know if you've already found a solution to this problem but this tends to happen to me when I forget to plug in the external hard drive before I open iTunes. What happens is that iTunes automatically creates a new iTunes Music folder in the iTunes folder of your Music folder (if you follow my drift). iTunes then looks for your music there;but it's not there because it's on your external drive. It then puts an exclamation mark against any music file that it can't find there. If you go to iTunes-preferences-advanced,click change,and change the iTunes Music folder location back to the folder on your external hard drive,or,if no folder,the hard drive itself,where the physical files are kept then iTunes should update its library and find them. If,of course,you've imported files while the iTunes Music folder is back in it's default position,they will have to be reimported.Make sure 'Copy files to iTunes Music folder when adding to library' is ticked,drag them out of the default folder to the desktop,double click,iTunes will reimport them to the external hard drive.Trash the files from the desktop when they've been copied over. Of course,there may be a simpler way of doing this but it works for me. Hope this helps.

Ext. hard drive ejects when MBP wakes from sleep

When I wake my MBP from sleep (by clicking the space bar), the ext. firewire hard (MyBook 500 GB) drive ejects leaving the msg. that it was not properly ejected and data might have been lost, etc. Is there a better way to wake it that won't cause the ext. hard drive to eject?
Thanks

Hi Logan,
You should post over in the Unibody forums, where you'll find many more people who own the same machine as you do (this area deals with the Original MBP).

Firewire external mobil disk hard drive is no longer recognized

After last system update, my firewire external mobil disk hard drive is no longer recognized. Any solutions?
Why does MacOS go backwards... gets worse over time?

Thought you could use this info about getting FireWire to work! I have had no trouble with any update Apple puts out (the Combo update is what I normally choose). Are you running 9.2 like your specs. say? You are in the Tiger forum, so I'll assume you haven't updated your Macs specs.
First, you should always Repair Permissions in Disk Utility before and after any update; I would do that now. If you installed your update with FireWire plugged in, your Mac may not recognize it anymore.
Try resetting your FireWire ports by disconnecting all FW devices, shut down your Mac and unplug it from AC power (wall socket) for 30 minutes. plug it back in and try FW.
If that did'nt work, download the combo update from this site (yours may be corrupt), not Software Update, disconnect all firewire + USB devices except keyboard + mouse, Repair Permissions, re-install update, Repair Permissions again + try. Yours may be the 10.4.5 Combo update. Others reading, download the Combo that applies to your system.
If that still did'nt get it Zap the PRAM. While restarting Mac hold down the following key combo Command-Option-P-R. Keep holding those keys down till you hear the second start-up chime, then release.
For those of you with Macs that are not PowerBooks or iBooks, a bad internal battery can cause FireWire to not be recognized, so make sure it's good!
Good Luck!
Cheers!
DALE

I-tunes on ext. hard drive

I would lie to free up space on my hard drive. A friend said his girls have their music on an ext. hard drive. I bought one and was able to copy the I-Tunes folder to the hard drive. Using windows I was able to hold the shift key while pressing start-Itunes-itunes and the window came up to create or choose a library. Here is the question, What do I do from here? Do I have to create a library first and then choose it? If so how do I do that? My ultimate goal being to have I-tunes open it's library on the ext. hard drive and I want to remove the hard drive that is currently on my lap top. Someone please help, and thank you in advance. JAY

hi, i'm having the same issue.
I followed itunes help and moved my entire library (20 gigs worth of stuff) to my lacie external hard drive. I opened up preferences and selected where I want itunes to find all my music, and itunes can't find any of my music. i'm having to manually select each song from my external hard drive right now, and that is taking FOREVER. I tried several different things, like consolidate library, and I tried messing around in itunes preferences, but nothing. any help would be greatly appreciated, as my macbook only has 60gb of space and i'd like to keep it as free as possible.
thank you!

How to delete pics from LR ext. hard drive within program.

I can't delete pics from disk. Error say finder doesn not support the volume. Using ext. hard drive and not in collection. New macbook pro with LR 4. Never experienced this problem on PC with LR 3. It appears this is a problem for other users. Has anyone founds a solution??

Thus must be a pure Mac-Finder/permissions problem.
In LR, as you corrctly assume, when you are in a folder (rather than a collection), you can hit the delete-key for any image, and you will get the dialog box asking for just removing from catalog or executing a physical deletion also in your operating system.
So I would continue any further troubleshooting in Mac Finder.
If Finder would not support the volume of the external hard disk (due to wrong formatting for Mac?), how can the image be read then?
If only deletion is denied, it might be a permissions problem.
Cornelia

Moved iTunes library to an ext hard drive to make space on my int drive... Followed steps from apple. Now I cannot access my music... It says: "File could not be used because the original file cannot be found. Would you like to locate it?"

Moved iTunes library to an ext hard drive to make space on my int drive... Followed steps from apple. Now I cannot access my music... It says: "File could not be used because the original file cannot be found. Would you like to locate it?"
I moved my iTunes library to my external hard drive some time ago and I followed the directions listed here on the apple support page. It did copy my library and now is on my hard drive... I can open iTunes and use it to sync all of my devices but I would like to play my music... I can see all of my music files but can not play them if I click on an album or song it says the following: "(file name) could not be used because the original file cannot be found. Would you like to locate it?" I click locate but do not know where to go from there? I need a way to access all files and not to hunt down one at a time on my hard drive... I am pretty sure I deleted the original library to make space on my internal drive which was the reason for moving it. I have tried and tried to fix it and do not have a lot of time to do so with a one and two year old at my house who do not like it whenI sit down at my computer. What to do??? Any help is much appreciated!!!

See Make a split library portable. Move all of the bits of the library together in the the correct shape and it should work. Or undo exactly what you did and then start over.
If you're a former Windows user don't try merging two folders together that have the same name by dropping one into the same folders as the other, as that goes badly on a Mac.
tt2

Multiple iPhoto libraries on my ext hard drive back up

Hi I have a problem with multiple iPhoto libraries on my ext hard drive back up They are different sizes and large 120gb Is there any way I can rationalise the libraries without the risk of losing data? My iPhoto library on the Mac appears to be complete but with >200gb of photos I cannot be sure.

I upgraded to Lion OS and suffered multiple crashes necessitating a complete rebuild of the system - reformat the main hard drive and install Lion OS from a disk In an effort to be absolutely sure I didn't lose data I have been overenthusiastic in transferring photos to the backup disk dragging and dropping files that contained images as well as a full transfer of "mymac" before reformating. Time machine backup was not realistic as this was the one operation which caused most of the "hangs" System now appears to be working well with Lion OS but I have masses of duplicate jpeg files in multiple folders and libraries - I am considering purchasing Duplicate Annihilator to deal with the duplicates then perhaps I should try to merge the libraries with iPhoto manager?

How to Copy a Specific Time Machine Back-Up to Ext Hard Drive

I'm transitioning from a MBP early 09 to a MBA mid 11. I pruned the MBP pretty well to migrate items from it to the Air, but I want to preserve the last "full" Time Machine back-up of the MBP to an external hard-drive. Not the "latest" - as the lastest back-up includes the pruning need to migrate necessary items from the Pro to the Air - but one dated a few days before I began the pruning. How do I get that specific back-up (currently on External Hard Drive A - 250 GB) onto a new external hard drive (Ext Hard Drive B - 1TB)? I want to preserve that specific back up then ERASE Ext Hard Drive A to use as a portable for the the MBA. Thank you.

don't delete anything on the TM drive using finder. you can do it from TM interface. however, in your case it will not help because TM will always make a full backup after a system restore like you did and there is absolutely no way to avoid it. as suggested you might want to reformat the TM drive and start backups from scratch.
BTW, to delete a single backup you start TM, scroll back to that backup, click on the "gears" action button in Finder's toolbar and select "delete backup".

Using ipod as hard drive error..

hello i have tried about 5 times now to use my ipod as hard drive..it keeps giving me an error for a song saying "the parameter is incorrect". I don't know what to do, when it happened to one of the songs i deleted it..bc i don't listent it but i need a way to do this process without deleting the songs i like.

No, you didn't screw up your iPod. It sounds like you may have to restore it, which will wipe out all data on it so make sure you have it backed up somewhere. Restoring is an easy process and it should fix your problem. The link below tells you how to do that. Good luck.
http://docs.info.apple.com/article.html?artnum=60983

I have just bought a macbook pro and i want to use an ext hard drive with it which i previously used on a windows computer, but when i plug it in it doesn't show up on my macbook pro, I've wiped it and just need to format it but don't know how, help

i have just bought a macbook pro and i want to use an ext hard drive with it which i previously used on a windows computer, but when i plug it in it doesn't show up on my macbook pro, I've wiped it and just need to format it but don't know how, any help would be much appreciated

Try the other USB port. If it still doesn't show up in Disk Utility then there may be something wrong with your Mac. Try something else in each USB port and see if it is seen. If the other thing, like a USB thumb drive, does show up in disk utiltiy then the USB ports are fine.
Power down the system and restart with the drive connected, go to DU and see it it is seen.

Data transfer: ext hard drive to new Mac with Mavericks using Time Machine

Data from old computer is on ext hard drive. I delayed transfer to new Mac. Now using Migration Assistant bit I don't know if it is working or just hung up. It shows 'looking for other sources' for over an hour. Please advise.

In general, most people will recommend Carbon Copy Cloner or SuperDuper! You can find either one easily enough with a web search.
However, in your case, I imagine you are going to have a hard disk returned to you all by itself, and you will need to install it in an enclosure. Don't let that bother you as this is easy to do and the enclosures are not expensive ($40 or so).
Once that is done, I would recommend you set up your brand new Mac by answering all the questions during initial setup as usual. Be sure to use your correct Apple ID - probably the same one you used to log into this support forum. When you reach the point in which it asks you if you would like to transfer your old documents and settings, connect the old hard disk and select it as the source. It will take some time as it copies all its contents to your new Mac. All your familiar items will be exactly as they were on the failed Mac.
After that, you can use the old hard disk as a Time Machine backup. When you are satisfied everything on your new Mac is running as it should, go ahead and erase the old disk. Then, tell Time Machine to designate it as a backup, and the rest is automatic.

Moving iPhoto library to Ext Hard Drive please help

Hi, I am moving from a Imac to Mac Book air. I copied the pictures folder on Imac to the External Hard drive. Plugged EHD into mac book air. Opened Iphoto and held down option key and then selected the libary on the EHD. Lots of activity on ext hard drive, but my pictures are not showing up in Iphoto. Any help would be really appreciated. Some priceless family photos I need to get access to. My Imac is no longer working, so I am going to be using the MacBOok air as my primary

I copied the pictures folder on Imac to the External Hard drive. Plugged EHD into mac book air. Opened Iphoto and held down option key and then selected the libary on the EHD. Lots of activity on ext hard drive, but my pictures are not showing up in Iphoto.
What are you seeing, when you are opening the iPhoto library in the copied Pictures folder? An empty iPhoto window? Error messages?
Is your external drive formatted MacOS X Extended (Journaled)?
Do you have the same versions of iPhoto on your iMac and new MBA? What are the versions?
Regards
Léonie

Firewire Hub + iPod + Ext. Hard Drive?

Similar Messages

Maybe you are looking for