FireWire is the only way to import Canon HV20 Camcorder videos into iMovie?

As a followup to my last post a moment ago tonight 1/30/08:
Is it true that I need a FireWire cable to import Canon HV20 Camcorder videos into iMovie?
If so, the Apple salesperson is wrong.
He told me last Monday that purchasing the new iLife 2008 (that contains iMovie 2008) would allow me to use my current USB cable.
Given I see NO FireWire port on my new MacBook Pro (bought in 8/2006), I don't see a solution.
Note the camera, an HD camcorder (the Canon HV20) did NOT come with a FireWire cable; it only came with a USB male plug on one side of the cable and the other is a small square-like male plug that connects to a female port on the Canon HV20.
Solution?
Thanks for any suggestions, Daniel

The USB cable is for importing still photographs. Not video.
The firewire 400 cable you need is one that goes from the 6 pin full size male connector to the small 4 pin form used for DV.
The cable plugs into the camera in a socket behind a plastic flap near the eyepiece. Its marked HDV/DV. The other end plugs into the MBP on the right-hand side. 4th from the back.

Similar Messages

How can I easily import Canon Mark III video into iMovie or Final Cut Pro X? Do I need a converter? Thanks!

How can I easily import Canon Mark III video into iMovie or Final Cut Pro X? Do I need a converter? Thanks!

Just click the import button and point it at the camera card.

I imported an hour of video into iMovie HD and cut it down to a 33 sec clip, and emptied the trash. When I save the project, the file size is 20Gb. How can I save just the 33 sec clip?

I imported an hour of video into iMovie HD and cut it down to a 33 sec clip, and emptied the trash. When I save the project, the file size is 20Gb. How can I save just the 33 sec clip?

Non-destructive editing is an important feature of iMovie HD 6.
iMovie preserves the entire copy of every clip you place into your movie in case you change your mind at a later stage.
So, if you have cut out one minute from a 45 minute clip, iMovie will have stored two complete copies of that clip. This is why is helps to set import as 3-5 minute clips rather than one huge chunk. As DV runs at 13GB per hour your project files can get very big.
One workaround is to complete the editing of a section of the movie, then export that to Quicktime: highlight the clip/s, choose Share-Quicktime, turn on Share selected clips only, and choose Full Quality from the pop-ip menu.
Once you have saved the stand-alone clip to your hard drive, you can re-import it into your project using the File/Import command, and delete the original long clip/s from the project.

Importing Anamorphic 16:9 video into iMovie

How can I import anamorphic 16:9 video into iMovie?
I tick the "automatic letterbox & pillarboxing" to off
and import.
The resulting video is made into 4:3 format and squashed up!
When I import into iDVD the video is pillar boxed even when selecting widescreen project.
I have a SONY digital 8 camcorder connected to iMac by firewire.
Please Help!
iMac G5 2.1 Mac OS X (10.4.6)
iMac G5 2.1 Mac OS X (10.4.6)

Hello Roller,
iMovie simply takes your footage for what it really is: standard 4:3 with a letterbox.
you could try capturing with a different software like Vidi or BTV Pro:
vidi
http://www.mitzpettel.com/software/vidi.php
BTV Pro
http://www.bensoftware.com/
There is a little droplet that will flag the material correctly once you have it on your Mac. It's called Anamorphicizer and you can find it here:
http://homepage.mac.com/sith33/FileSharing34.html
hope this helps
mish

How to import Sony DCR-SX85 video into iMovie. Doesn't do it automatically and using Mpeg stream lip didn't help. I have iMovie HD 6.0.3

Can't import Sony DCR-SX85 video into iMovie HD 6.0.3. MPEG stream clip didn't work. This has been discussed before, but I haven't found a solution yet.

Can't import Sony DCR-SX85 video into iMovie HD 6.0.3. MPEG stream clip didn't work. This has been discussed before, but I haven't found a solution yet.

What's the best way to import and manage iPhone video?

I don't really want to use iPhoto for importing video - it doesn't seem like it's built with that in mind even though it's the default option for importing both photos and videos. It doesn't have very good (if any) options for filtering just videos or just photos, either when viewing or importing. And I don't want to have videos all jumbled in with photos in my iPhoto library.
I also don't really want to use iMovie every time I want to import videos. I know it's designed for video, but it's far more of an editing app than a management app and I don't want to be editing all my videos or loading up iMovie just to browse them.
I considered Clipstart but it commits a cardinal sin when it renames all my videos in the Finder to a sequential numbering that begins at 01.mov for each new day, creating hundreds and thousands of identically titled movies in the video library, albeit in their own folders, but chaos if you want to search in Spotlight or anything.
So I'm left with Image Capture, which gives me complete control of what I import and where it goes. The problem is that it too doesn't offer a filter for seeing just the videos or just the photos on my iPhone. My photos are all being imported automatically by Photostream so I only want to grab the videos. If I set 'view by width' it seperates out the videos because they have no width tag, but then they aren't displayed by date order so I can't easily find the new videos I've not imported before.
So... what do you do?

That's exactly the sort of crafty workaround I like. I didn't know they were all tagged, but that would definitely work. I'd still love a dedicated app that did it really well, or more love given to that side of things in iPhoto. iMovie is too hefty for just managing them.
Is iPhoto properly built to handle management of iPhone video, by the way? I didn't want to use it because it didn't seem like it was, and also because I sync my iPhoto library with Dropbox and video would more than treble the size of the library so I manage it from the Finder mostly, importing clips to iMovie if I do want to edit something (rarely).

What is the best way to import pictures from Lightroom 5 into FCP X

What is the best way to transfer pictures from Lightroom 5 into Final Cut Pro X?

There is no one best way. If, for instance, you want to be able to zoom into the picture with a Ken Burns effect then you may want to save out a very high res version that will be larger than your video resolution. Just use Lightroom to export a jpg file wherever you want it. You could export it into the Events folder and then choose not to copy it when you import it within FCPx. You could import the picture into iPhoto and then access it directly from within FCPx. Those are two simple, "regular" ways to get it into FCPx but if you are not going to Ken Burns the image by zooming into it and such you will want to crop it in Lightroom to the same size you will be using ie if you are making 720HD video then crop the image to that size and proportion before you export it from Lightroom.

Anyone know of a way to import .mov file extension files into imovie '09?

Great forum. Thanks.
I can't seem to import a movie file with a ".mov" suffixe.
Most of the older finished work i have is in that format. I have since begun exporting files with the ".m4v" file extension and they are able to be imported.
Anyone know of any program available which will convert these ".mov" files to something that is more compatible with importing into imovie '09, or perhaps I am completely so asleep at the wheel I missing something staring me in the face?
Any help either way would be appreciated.

How about any free conversion programs that would allow me to convert files from .mov to a format that is more compatible with importing into imovie? If not I guess QTP will be the way to go.
No, the clips were shot using a SONY HD Handycam. The compression occured during the exporting of the finished clip. Instead of using "export movie" under Share in imovie, I used the "Export using Quicktime" option in order to keep the file size down. It did not give me any indication that choosing that option would prevent me from re-importing the finished piece back into imovie for an edit. It seems odd to offer an export option that is not compatible with importing into the the very program being used to export the file.
I simply want to be able to either re-import these ".mov" files back into imovie '09, or convert them to a file format that will allow me to at least open them in imovie '09. Any help to that end is greatly apprecited.
Thanks

How to import MPEG-1 camcorder video into iMac?

I have a Sony digital camcorder purchased in 2002 which records to film. I would like to import the video from this camcorder into my iMac (purchased Jan. 2007) for playback on the computer and to burn the video to DVDs.
When I hook up the camcorder to my computer via Firewire cable and turn it on to the VCR position for importation into the iMovie HD program, nothing happens. There is no communication between the camcorder and the iMovie HD program. None of the steps recommended by Apple that I have tried to establish communication between the camcorder and iMovie HD have worked. It appears that the camcorder format (MPEG-1) is incompatible with iMovie HD.
I will appreciate any knowledgeable advice on how to successfully import this video into my iMac for the intended purposes.
Bob

Thanks for your responses.
I’m embarrassed to admit that I miscued in attempting to import the camcorder video into my computer. I corrected my mistake and successfully imported the video, watching it on the iMovie monitor and seeing the video clips appear as the import proceeded.
I added the clips to the movie and saved the project. I just got through playing back the whole movie. Yippee!
I was surprised that this 12-minute recording produced a movie file size of 2.14 GB. Ouch! Is this normal? If so, I’m glad I opted for a 500 GB hard drive on this iMac!
You may be wondering where I went wrong in my initial attempts to import this movie into my computer. John was right in saying “...it should be as simple as you thought.” Simple, that is, if you follow all of the necessary steps! Where I missed the boat was in not clicking the Create button after entering the various pieces of information into the Create Project window. I obviously overlooked the fact that Apple treats the importing of a simple camcorder video into a computer as a major movie-making event. The next time I go through this exercise I’ll don my Martin Scorsese hat to make sure it doesn’t happen again!
The next step will be to burn this movie to a DVD. Wish me success as I research how to do this without any further miscues.
Bob

The Only Way to Import from DVD is to Encode the VOBs First?

Is there any way to get video from DVDs straight into Premiere? I guess I can import the VOBs but there's a lot of weirdness with that and that's besides the fact that to keep those files on the hard drive is ridiculous considering their size. Any ideas? If you're sure that there's no other way then please say so. Logically thinking, I doubt there is some magical other way but ya know... Either way, maybe I can get suggestions on what people find to be the best way? Thanks ^^

David,
There are three basic ways to do this. Ann mentioned two. The other is to play the DVD from a DVD player, into an A -> D converter (your digital camera could well work for this) and capture with appropriate software. Save as DV-AVI. Each method has its ups-n-downs, but should/could get the job done.
Also see Craig's question, "Why are you editing VOBs?" as there could well be a better workflow.
Hunt
PS Elements is a tad kinder to VOB's on Import, but not by much. I'd still use one of the three above methods.

What is the best way to import photos from iPhoto 9 into PSE 11?

I just installed PSE 11 and I would like to move the pictures from my iPhoto 9 Library in to PSE 11.
What is the best way to accomplish this as far as accuracy of data?
Thank you!
Len

There is a direct option in Organizer which lets you import from iPhoto. This is under Import dropdown menu in left panel.
If you are importing from iPhoto'09, your Tags, Albums Events, captions, star rating would also get imported apart from your media. This works differently for iPhoto'011 where you can get only the media to the Organizer,
Just a couple of things to know:
1. If in iPhoto preferences, you have chosen to create copies of your photos in iPhoto library and your library hence refers to the media store inside the library package, then on importing from iPhoto, Organizer would create copies of all those media under your pictures folder. That means, it would not corrupt your iPhoto package or modify it in any way.
2. However, if in iPhoto, you are organizing by using references to original location on your Hard drive i.e. you are not creating copies of media in iPhoto library then on importing from iPhoto to Organizer, the Organizer would also use the same references and would not create copies of the media.
Hope that helps!
~V

Is there a way to import iMovie2 for iOS movies into iMovie 10 on a Mac?

I used to be able to save the individual components (clips, voiceover tracks, etc) when I chose "Save to iTunes."
Now that functionality seems limited to sending to another iOS device. Is there a way to get the "pieces" into
iMovie on the Mac for further editing?

Susy,
Pick/Click the appropriate iCal link from Jewish Holiday downloads for desktop, mobile and web calendars | Hebcal Jewish Calendar.

Is the only way to import large amount of data and database objects into a primary database is to shutdown the standby, turn off archive log mode, do the import, then rebuild the standby?

I have a primary database that need to import large amount of data and database objects. 1.) Do I shutdown the standby? 2.) Turn off archive log mode? 3.) Perform the import? 4.) Rebuild the standby? or is there a better way or best practice?

Instead of rebuilding the (whole) standby, you take an incremental (from SCN) backup from the Primary and restore it on the Standby. That way, if, for example
a. Only two out of 12 tablespaces are affected by the import, the incremental backup would effectively be only the blocks changed in those two tablespaces (and some other changes in system and undo) {provided that there are no other changes in the other ten tablespaces}
b. if the size of the import is only 15% of the database, the incremental backup to restore to the standby is small
Hemant K Chitale

What is the best way to import contacts from a spreadsheet to my iphone 4S

Hi,
I have around 20,000 contacts that I wish to import onto my iphone 4S.
I am currently compiling a spreadsheet from all different sources. I am based in the UK.
Would there be any format that I need to used?
Is there some sort of application that can be usedto import contacts from different sources?
Thanks guys!

The only way you're gonna get your contacts into the iPhone contacts app is by syncing them through iTunes, from a supported contact application on your computer, or through an Exchange setup like Gmail. So, you will have to get these contacts into Oulook, Windows Address Book, OS X Address Book or in the "cloud".

What is the easiest way to create and share photo/video gallery or slide show with family via web?

I am brand new to Lightroom (converted from Aperture) and made the conversation mainly because I thought that Adobe would bring many more options and because Apple has discontinued development of Aperture. Part of the reason I am asking this question is because there is so much information out there on this subject that it is overwhelming and actually is making it difficult to determine the best way to simply arrange my photos/videos into a slideshow and then to publish somewhat of a gallery or slideshow to show family and friends in other states.
I do not like publishing things to Facebook/etc. Too public. I just want a simple, efficient way to create a gallery with music and have a link I can send to my family (they all live in another state).
Any help narrowing this down for me would be greatly appreciated!
Thanks,
RJ Chesterton

an airport extreme base station would do the job, it has several ethernet ports for use by non-wireless devices, allows connecting a usb printer to share, and supports both pc and mac via wireless
config is via a dedicated set-up utility
however, you can always connect the printer to the mac or pc and share it that way, so having this support in the base station isn't essential
a much cheaper unit from netgear etc. (such as the netgear wgr614) would offer the other features, be far more compact, and allow configuration via web browser, which might be a factor if you need to give 'remote support'
i've got both airport and netgear wireless devices, imho for non-technical users the netgear is simpler than the airport due to the web browser configuration

FireWire is the only way to import Canon HV20 Camcorder videos into iMovie?

Similar Messages

Maybe you are looking for