Firewire kext not loading. FW recording interface drops out

Macbook pro 7,1
OS X Lion 10.7.5
Focusrite Saffire Pro 40 Firewire recording interface
At any time my interface disconnects from the macbook. I then have to shutdown and wait 2 minutes before the interface will connect again. I have used other interfaces and the same thing happens, but not when these interfaces, or my own, are used on other macs.
I can see that AppleFWAudio.kext is not loaded when the intereface is connected. Only the standard OHCI kext loads automatically. I'm guessing that this may affect the stability of the FW connection under high load or for audio purposes.
I am a new mac user, and also not a coder of any sort, so terminal is beyond me. I need to know if there is a simple way to initiate a kext (which you should be able to do in my opinion), or if someone can provide me with the code i need, in full, to paste into terminal. A shortcut for this, or permanent solution would be nice too.
Thanks

I'm having almost the exact same problem, with the exact same equipment, only I just upgraded to 10.9 Mavericks.
Late 2011 MacBook Pro
Focusrite Saffire Pro- 14 (cuts out and now will not connect at all)
AppleFWAudio.kext says "not loaded" in System Report
Any leads?
The only reason I know to look at the FireWire driver is from following the Focusrite troubleshooting tips.

Similar Messages

  • I just reset my new ipad air,it's not loading.Only apple logo come out.

    i just reset my new ipad air,it's not loading.Only apple logo come out.

    If the above doesn't work, try the following:
    1. Restore:
    http://support.apple.com/kb/HT1414
    2. Recovery:
    http://support.apple.com/kb/HT1808

  • My iPhone 5c does not load my recorded videos

    My 5c is almost 2 years old and it is currently updated on the latest ios.
    It's just recently (4-1-15) started not loading my already recorded videos. My 2 year old daughter uses my phone to watch netflix and to use her apps, and i sometimes load a video i recorded that she likes to watch. However, my videos just take a long time to load. If i have a video of like 1 min it takes about 30-45 seconds to load before it plays it. That doesn't sound like long, but when you get used to clicking on your videos only to have them play automatically to taking seconds to a minute to load that is nuts!
    The video where I noticed was a 7 min video and whenever my daughter would go to play it, it wasnt playing. She has a short fuse as do most toddlers when they dont get what they want, and when the video doesnt load boy do i hear it. It's also just become annoying. I've restarted my phone a few times thinking it would fix it, but nothing has. Connecting to wifi disconnecting, even just turning on/off my bluetooth. Just any random thing i can think of to fix it.
    I just need some help as to why this is happening? Is it a bug from this last update or could it be my phone slowing down with age?
    I'd appreciate some insight. Thank you

    I followed the link and tried the suggestion about reloading an Apple mobile support driver.  It did not help.  However, I will let things settle and look at the recommendations again.  I may see if there is a better copy of the driver available.
    Thank you,
    Jan

  • Do not load the record?

    Hello Experts,
    Wondering if there is a way to specify (in the transfer rules / routines)not to load the records if it satisfies Infob1='abc' and Infob2='bcd'?
    Thansk
    Sweatha

    Hi Sweatha,
    do you need to get the record out during the extraction or during the upload in the data target?
    In the upload rules you could use a Startroutine to filter the records. "abc" would be a value of the infoObject.
    Data: n type i.
    data: l_tabix like sy-tabix.
    Loop AT DATA_PACKAGE.
    l_tabix = sy-tabix.
    If COMM_STRUCTURE-InfOb1="abc and COMM_STRUCTURE-InfOb2="BCD".
      delete DATA_PACKAGE index l_tabix.
      continue.
      endif.
    Endloop.
    Hope that helped,
    regards,Michael

  • Blank cdr will not load, macbook spits it back out

    I bought some new cdr's and my macbook will not load them. after a few minutes it spits the disc out. i can load the disk fine in my imac and pc computers. any ideas. i've shut my macbook down completely and turned it on again without any result.

    The only answer is bad optical drive or Bad CDRs....I would try a blank DVd in the Macbook and try that, and then make shure your optical drive is recognized as hardware

  • Google Crome is not loading scripts from my check out page

    I recently developed a page for my client and it seems all fine in all browser and all the pages are responsive so far in its just the CHECK OUT page which is not loading scripts on GOOGLE CHROME.
    SCREENSHOT:
    https://www.dropbox.com/s/f4s2kz9ghl0g1xz/13.jpg
    WEBSITE:
    www.simplyscotlandshop.com
    Thanks guys

    Hey there,
    Few things..
    You got a script error -
    Timestamp: 31/05/13 9:25:35 PM
    Error: TypeError: $(...).swipe is not a function
    Source File: http://www.simplyscotlandshop.com/js/MASTER.js
    Line: 100
    Your calling for an alement that does not exist here thus you have a script error. Wrap that call in a condition where it checks if the element exists first before it runs.
    Secondly your calling scripts incorectly.
    All you need to do is set the source as ..
    src="/yourfolder/youfile.file"
    So everything starts with just a slash, no absolute url or ../
    This will address other issues.
    Do these and see how you are and then post if there are other issues

  • Wireless does not load balance and Connection drops to 1Mbps at a certain time

    Hi,
    We had wireless LAN setup and it seems that every afternoon, the connection notification on their laptop drops to 1Mbps and slowness on the network is experienced. how can I identify the cause of this drop connection speed?
    Also when one of the APs went down, the other nearby APs does not cover for the AP that went down, is it not supposed to cover for the downed AP?
    BTW out setup is LAP with 4400 series WLC with VoWLAN running on it but on differed radio and SSID. Data is on b/g while VoWLAN is on A.

    also i am seeing a lot of coverage hole detection on the logs.
    is there any problems with the coverage of the APs? should I place additional APs to cover up the holes?If you have available funds/resources then putting additional APs won't hurt ... especially if one of the APs fail.  Putting additional APs will also help distribute the clients.if it is cause by rouge AP how can i prevent it.
    First, you have to know what radios is the AP using.  For example, if the Rogue AP is using 802.11b then disable your 802.11b or use a different channel.  I'm curious to know this is the case since the WLC would've used a different channel if a Rogue AP is broadcasting on similar channel (unless there's just too many Rogue APs using 802.11b).
    you recommed any steps on how can i trace sudden  surge of wireless use I'd like to identify/isolate how correct is my hypothesis that it's due to the sudden surge of wireless use.  If this is the case, then I'd also like to know what application(s) are being used to overwhelm the wireless.

  • After installing the 9.0.1 update for Mozilla Firefox the bookmark icons are not loading on the bookmarks drop-down menu, even though they are loading when I go to Show All Bookmarks. Why?

    I am using a Mac and the 9.0.1 version of Firefox

    Firefox Help already had an answer for me - should have looked better: https://support.mozilla.org/en-US/kb/latest-firefox-issues#w_icons-missing-in-the-bookmarks-menu
    IT WORKS PERFECTLY NOW!!! THANK YOU!

  • Lots of .kexts not loading

    After I logged into my account, I got a lot of these popping up.
    I don't know what half of these are. But it seems many (all?) are third party. What the heck is ALF? How would I go about uninstalling these?

    Goto system>library>extensions and transfer these to a new folder on your destop.
    Restart and see if all is good.

  • Apps not downloading - they start then drop out

    I trawled through all the forums/discussions and questions on the support communities but are yet to find a solution.
    In brief: I am overseas but usually based in the UK (not sure this will have any bearing on the issue but still), my apps on my iPhone 5 were not updating - this has happened before twice but I managed to resolved those issues those times, so I deleted them all with a  view to reinstalling. So far so good.
    I did that and then when I tried to reinstall from my phone's App Store, I find that the process starts but within a minute or two I get a message telling me that the app can't download at this time. I did manage to download two apps but they other 10 or so errored in this way.
    Also, I can download apps onto my Mac but they don't seem to be synching (via the Cloud)  with my phone and they used to work fine.
    I've rebooted/reset and pretty done everything I can think of and still I can't download my apps.
    I'm pretty much stuck because I need to download Whatsapp and Viber asap - until them I'm pretty much incommunicado.
    Very much appreciate it if someone out there can shed some light.
    Cheers,
    Z

    I know this will sound pretty obvious but did you try a hard reset on your phone. Close out all the apps, hold the home and power button and do a fresh restart. Also try restarting your router. Let me explain why I'm suggesting this. My sister's phone in her place would randomly stop connecting to the app store, cancel downloads on the App store for no reason.
    We tried everything, restoring it, doing a fresh install, swapped the phone out. Still nothing. Took it to my place and no issues which was even more puzzling. She couldn't even connect when on 4G. Someone suggested I do a hard reset of my router and phone at the same time. For some strange reason that solved her problem.

  • My CDs will not load.  They only pop out.

    This is a new problem.  I try to inject a CD and it will only bounce back out.  Any suggestions?

    Just to add my thoughts about the install disks:
    All Macs did come with install disks in the box (except for the brand new Macs with Lion pre-installed) and, you may need them at some point to reinstall, run AHT (hardware test), or simply wipe and install in order to sell it. So, aside from what you decide on re. your media drive, I'd call Apple and ask for replacement disks - you'll need to give them your serial number and they'll send you disks for a nominal charge.
    My suggestion re. the drive: buy an external - less finicky and probably less expensive.

  • Can I delete extensions that do not load or am I looking for trouble

    After running EtreCheck I noticed that many extensions do not load.  So my question is: Can I delete extensions that do not load or am I looking for trouble?
    Here is the EtreCheck report:
    Problem description:
    slow with Yosemite
    EtreCheck version: 2.1.8 (121)
    Report generated February 19, 2015 at 12:11:22 PM EST
    Download EtreCheck from http://etresoft.com/etrecheck
    Click the [Click for support] links for help with non-Apple products.
    Click the [Click for details] links for more information about that line.
    Hardware Information: ℹ️
        Mac Pro (Late 2013) (Technical Specifications)
        Mac Pro - model: MacPro6,1
        1 3 GHz 8-Core Intel Xeon E5 CPU: 8-core
        32 GB RAM Upgradeable
            DIMM1
                8 GB DDR3 ECC 1866 MHz ok
            DIMM2
                8 GB DDR3 ECC 1866 MHz ok
            DIMM3
                8 GB DDR3 ECC 1866 MHz ok
            DIMM4
                8 GB DDR3 ECC 1866 MHz ok
        Bluetooth: Good - Handoff/Airdrop2 supported
        Wireless:  en2: 802.11 a/b/g/n/ac
    Video Information: ℹ️
        AMD FirePro D500 - VRAM: 3072 MB
        AMD FirePro D500 - VRAM: 3072 MB
            Thunderbolt Display 2048 x 1152
            Thunderbolt Display 2048 x 1152
    System Software: ℹ️
        OS X 10.10.2 (14C109) - Time since boot: 2:10:13
    Disk Information: ℹ️
        APPLE SSD SM1024F disk0 : (1 TB)
            EFI (disk0s1) <not mounted> : 210 MB
            Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
            Macintosh HD (disk1) / : 999.32 GB (760.04 GB free)
                Core Storage: disk0s2 999.70 GB Online
    USB Information: ℹ️
        Apple Inc. BRCM20702 Hub
            Apple Inc. Bluetooth USB Host Controller
        American Power Conversion Smart-UPS 3000 XL FW:691.18.D USB FW:7.3
        Prolific Technology Inc. USB-SATA Bridge
        Apple Inc. Display Audio
        Apple Inc. FaceTime HD Camera (Display)
        Apple Inc. Apple Thunderbolt Display
        Apple, Inc. Keyboard Hub
            Apple Inc. Apple Keyboard
        Apple Inc. FaceTime HD Camera (Display)
        Apple Inc. Apple Thunderbolt Display
        Apple Inc. Display Audio
    Thunderbolt Information: ℹ️
        Apple Inc. thunderbolt_bus_2
            Apple Inc. Thunderbolt Display
        Apple Inc. thunderbolt_bus_1
        Apple Inc. thunderbolt_bus_0
            Promise Technology, Inc. Pegasus2-R
                Drobo 5D
            Apple Inc. Thunderbolt Display
    Configuration files: ℹ️
        /etc/hosts - Count: 1
    Gatekeeper: ℹ️
        Mac App Store and identified developers
    Kernel Extensions: ℹ️
            /Applications/MacX Video Converter Pro.app
        [not loaded]    com.macxdvd.driver.goodSysAudioCapture (1 - SDK 10.10) [Click for support]
            /Library/Extensions
        [loaded]    com.TrustedData.driver.VendorSpecificType00 (1.7.0 - SDK 10.7) [Click for support]
        [not loaded]    com.blackmagic-design.desktopvideo.iokit.driver (10.3.4 - SDK 10.9) [Click for support]
        [not loaded]    com.blackmagic-design.desktopvideo.iokit.framebufferdriver (10.3.4 - SDK 10.9) [Click for support]
        [not loaded]    com.blackmagic-design.desktopvideo.multibridge.iokit.driver (10.3.4 - SDK 10.9) [Click for support]
        [not loaded]    com.blackmagic-design.driver.BlackmagicIO (10.3.4 - SDK 10.9) [Click for support]
        [not loaded]    com.blackmagic-design.driver.BlackmagicUsbIO (10.3.4 - SDK 10.9) [Click for support]
        [loaded]    com.drobo.SCSI.ThunderBolt (1.1 [70504] - SDK 10.8) [Click for support]
        [loaded]    com.promise.driver.stex (5.2.10 - SDK 10.9) [Click for support]
            /Library/Extensions/DeckLink_Driver.kext/Contents/PlugIns
        [not loaded]    com.blackmagic-design.desktopvideo.firmware (10.3.4 - SDK 10.9) [Click for support]
            /System/Library/Extensions
        [loaded]    com.Cycling74.driver.Soundflower (1.5.3 - SDK 10.6) [Click for support]
        [not loaded]    com.FTDI.driver.FTDIUSBSerialDriver (2.2.14) [Click for support]
        [not loaded]    com.Maxtor.driver.PowSecDriver (4.2.7) [Click for support]
        [not loaded]    com.SiliconImage.driver.Si3124u (2.0.3) [Click for support]
        [not loaded]    com.Susteen.driver.PL2303 (1.2.0) [Click for support]
        [loaded]    com.airgrab.driver.AirGrabFirewallModule (3.0) [Click for support]
        [not loaded]    com.aliph.driver.jstub (1.1.2 - SDK 10.7) [Click for support]
        [not loaded]    com.alwaysthinking.thinkinghomeUSB (1.1.7) [Click for support]
        [loaded]    com.attotech.driver.ATTOiSCSI (3.4.1b1 - SDK 10.6) [Click for support]
        [not loaded]    com.cy.iokit.Morpheus (1.4) [Click for support]
        [not loaded]    com.detto.iokit.M2MantiClassic (2.1) [Click for support]
        [not loaded]    com.devguru.driver.SamsungComposite (1.4.26 - SDK 10.6) [Click for support]
        [loaded]    com.globaldelight.driver.BoomDevice (1.1 - SDK 10.1) [Click for support]
        [not loaded]    com.hzsystems.driver.CDSDAudioCaptureSupport (1.5) [Click for support]
        [loaded]    com.hzsystems.terminus.driver (4) [Click for support]
        [not loaded]    com.perceptiveautomation.indigo_overrides.kext (1.0.0d1) [Click for support]
        [not loaded]    com.prolific.driver.PL2303 (1.2.1) [Click for support]
        [not loaded]    com.rim.driver.BlackBerryUSBDriverInt (0.0.33) [Click for support]
        [not loaded]    com.rim.driver.BlackBerryUSBDriverVSP (0.0.33) [Click for support]
        [not loaded]    com.roxio.BluRaySupport (1.1.6) [Click for support]
        [not loaded]    com.shed.PowerLinc.kext (1.0.0) [Click for support]
        [not loaded]    com.shed.PowerLincCU.kext (1.0.0) [Click for support]
        [not loaded]    com.shed.cm15.kext (1.0.0) [Click for support]
        [not loaded]    com.smithmicro.nke.NetBlockade (4.0) [Click for support]
        [not loaded]    com.wdc.driver.IOFireWireWDHID (1.1.2) [Click for support]
            /System/Library/Extensions/IOFireWireMxBt.kext
        [not loaded]    com.maxtor.iokit.IOFireWireMxBt (3.0.0) [Click for support]
            /System/Library/Extensions/ssuddrv.kext/Contents/PlugIns
        [not loaded]    com.devguru.driver.SamsungACMControl (1.4.26 - SDK 10.6) [Click for support]
        [not loaded]    com.devguru.driver.SamsungACMData (1.4.26 - SDK 10.6) [Click for support]
        [not loaded]    com.devguru.driver.SamsungMTP (1.4.26 - SDK 10.5) [Click for support]
        [not loaded]    com.devguru.driver.SamsungSerial (1.4.26 - SDK 10.6) [Click for support]
            /Users/[redacted]/Library/PreferencePanes/Contents/PlugIns/TechTool Pro 7.app
        [not loaded]    com.micromat.driver.spdKernel (1 - SDK 10.8) [Click for support]
        [not loaded]    com.micromat.driver.spdKernel-10-8 (1 - SDK 10.8) [Click for support]
            /Users/[redacted]/Library/Services/ToastIt.service/Contents/MacOS
        [not loaded]    com.roxio.TDIXController (2.0) [Click for support]
    Launch Agents: ℹ️
        [not loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
        [loaded]    com.adobe.CS5ServiceManager.plist [Click for support]
        [running]    com.blackmagic-design.DesktopVideoFirmwareUpdater.plist [Click for support]
        [running]    com.micromat.TechToolProAgent.plist [Click for support]
        [loaded]    com.oracle.java.Java-Updater.plist [Click for support]
        [not loaded]    com.teamviewer.teamviewer.plist [Click for support]
        [not loaded]    com.teamviewer.teamviewer_desktop.plist [Click for support]
    Launch Daemons: ℹ️
        [loaded]    com.adobe.fpsaud.plist [Click for support]
        [loaded]    com.adobe.SwitchBoard.plist [Click for support]
        [running]    com.attotech.iscsid.plist [Click for support]
        [running]    com.backblaze.bzserv.plist [Click for support]
        [loaded]    com.blackmagic-design.desktopvideo.XPCService.plist [Click for support]
        [running]    com.blackmagic-design.DesktopVideoHelper.plist [Click for support]
        [running]    com.blackmagic-design.streaming.BMDStreamingServer.plist [Click for support]
        [running]    com.datarobotics.ddservice64d.plist [Click for support]
        [running]    com.datarobotics.ddserviced.plist [Click for support]
        [running]    com.micromat.TechToolProDaemon.plist [Click for support]
        [loaded]    com.microsoft.office.licensing.helper.plist [Click for support]
        [loaded]    com.oracle.java.Helper-Tool.plist [Click for support]
        [loaded]    com.oracle.java.JavaUpdateHelper.plist [Click for support]
        [running]    com.starfield.backupservice.plist [Click for support]
        [loaded]    com.teamviewer.Helper.plist [Click for support]
        [not loaded]    com.teamviewer.teamviewer_service.plist [Click for support]
    User Launch Agents: ℹ️
        [loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
        [loaded]    com.adobe.ARM.[...].plist [Click for support]
        [running]    com.backblaze.bzbmenu.plist [Click for support]
        [loaded]    com.bittorrent.uTorrent.plist [Click for support]
    User Login Items: ℹ️
        Cookie    Application  (/Applications/Cookie.app)
        Network Speed Monitor    Application  (/Applications/Network Speed Monitor.app)
        CleanAgent    Application  (/Applications/Clean.app/Contents/Resources/CleanAgent.app)
        SpeechSynthesisServer    Application  (/System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks /SpeechSynthesis.framework/Versions/A/SpeechSynthesisServer.app)
        ClamXav Sentry    Application  (/Applications/ClamXav.app/Contents/Resources/ClamXav Sentry.app)
    Internet Plug-ins: ℹ️
        AdobePDFViewerNPAPI: Version: 11.0.10 - SDK 10.6 [Click for support]
        Flash Player: Version: 16.0.0.305 - SDK 10.6 [Click for support]
        AdobePDFViewer: Version: 11.0.10 - SDK 10.6 [Click for support]
        LogMeInSafari32: Version: 1.0.1001 - SDK 10.7 [Click for support]
        Scorch: Version: Unknown - SDK 10.2 [Click for support]
        AdobeExManDetect: Version: AdobeExManDetect 1.1.0.0 - SDK 10.7 [Click for support]
        iPhotoPhotocast: Version: 7.0 - SDK 10.8
        DirectorShockwave: Version: 11.0.3r472 [Click for support]
        QuickTime Plugin: Version: 7.7.3
        FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
        GarminGpsControl: Version: 4.2.0.0 - SDK 10.8 [Click for support]
        AmazonMP3DownloaderPlugin: Version: AmazonMP3DownloaderPlugin 1.0.17 - SDK 10.4 [Click for support]
        CANONiMAGEGATEWAYDL: Version: 3.1.0.2 [Click for support]
        DivXBrowserPlugin: Version: 2.2 [Click for support]
        Musicnotes: Version: 1.19.0 [Click for support]
        LogMeIn: Version: 1.0.1001 - SDK 10.7 [Click for support]
        OVSHelper: Version: 1.1 [Click for support]
        Google Earth Web Plug-in: Version: 6.1 [Click for support]
        AmazonMP3DownloaderPlugin101750: Version: AmazonMP3DownloaderPlugin 1.0.17 - SDK 10.4 [Click for support]
        Default Browser: Version: 600 - SDK 10.10
        Flip4Mac WMV Plugin: Version: 2.3.4.1 [Click for support]
        SharePointBrowserPlugin: Version: 14.4.7 - SDK 10.6 [Click for support]
        Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Click for support]
        JavaAppletPlugin: Version: Java 8 Update 31 Check version
        OfficeLiveBrowserPlugin: Version: 12.2.8 [Click for support]
    User internet Plug-ins: ℹ️
        WbeTools64_14: Version: 1.0.23.53 © 2013 - SDK 10.6 [Click for support]
        WebEx: Version: 1.0 [Click for support]
        WebEx64: Version: 1.0 - SDK 10.5 [Click for support]
        Folx3Plugin: Version: 4.0 - SDK 10.6 [Click for support]
        fileEditTool64_15: Version: 1.0.35.65 © 2013 - SDK 10.6 [Click for support]
    Safari Extensions: ℹ️
        Open in Internet Explorer
        SaveFrom.net helper
    3rd Party Preference Panes: ℹ️
        Akamai NetSession Preferences  [Click for support]
        APC PowerChute Personal Edition  [Click for support]
        Backblaze Backup  [Click for support]
        Blackmagic Desktop Video  [Click for support]
        Flash Player  [Click for support]
        Java  [Click for support]
        TechTool Protection  [Click for support]
    Time Machine: ℹ️
        Skip System Files: NO
        Mobile backups: OFF
        Auto backup: YES
        Volumes being backed up:
            Macintosh HD: Disk size: 999.32 GB Disk used: 239.28 GB
        Destinations:
            Time Machine-Drobo [Local]
            Total size: 17.59 TB
            Total number of backups: 77
            Oldest backup: 2014-07-18 01:39:12 +0000
            Last backup: 2015-02-19 16:04:28 +0000
            Size of backup disk: Excellent
                Backup size 17.59 TB > (Disk size 999.32 GB X 3)
    Top Processes by CPU: ℹ️
            11%    WindowServer
             6%    Safari
             5%    Mail
             2%    firefox
             1%    bzfilelist
    Top Processes by Memory: ℹ️
        790 MB    firefox
        378 MB    mds_stores
        344 MB    clamd
        309 MB    Safari
        241 MB    Mail
    Virtual Memory Information: ℹ️
        21.17 GB    Free RAM
        6.67 GB    Active RAM
        4.12 GB    Inactive RAM
        2.38 GB    Wired RAM
        6.47 GB    Page-ins
        0 B    Page-outs
    Diagnostics Information: ℹ️
        Feb 19, 2015, 10:00:50 AM    Self test - passed
        Feb 18, 2015, 03:49:35 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/AgileTransCmd_2015-02-18-15493 5_[redacted].crash
        Feb 18, 2015, 03:44:30 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/AgileTransCmd_2015-02-18-15443 0_[redacted].crash
        Feb 16, 2015, 12:12:51 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/mdworker_2015-02-16-121251_[re dacted].crash

    Starting your Mac in "Safe Mode" (see below) will load only Apple-provided kernel extensions. Observing its perfomance in that mode will be instructive.
    The problems you describe are likely to have been caused by garbage software of which "TechTool Pro" is only one example. That system has been altered from its factory configuration through the installation of several third party system modifications, any one of which can cause poor performance. Interaction between two or more is another possibility. Running a torrent client is another way of inviting malware intrusion.
    Safe Mode or "Safe Boot" is a troubleshooting mode that bypasses all third party system extensions and loads only required system components. Read about it: Starting up in Safe Mode
    You must disable FileVault before you can start your Mac in Safe Mode.
    Starting your Mac in Safe Mode will take longer than usual, graphics will not render smoothly, audio is disabled on some Macs, and some programs (iTunes for example) may not work at all.
    Merely starting your Mac in Safe Mode is not intended to resolve the problem, it's to observe its performance without certain additional components.
    To end Safe Mode restart your Mac normally. Shutdown will take longer as well.

  • Premiere pro 2014 cross fades don't get saved or load as saved audio drops???

    For no apparent reason premiere pro 2014 will not save cross fades...  it saves them but wont load them
    Audio is dropping out ....
    I was given a project to make some changes to and every time I open it I need to recreate the cross fades and then export it and then check it and then recreate the cross fades that didn't export and then hope for the best!!
    this is so unstable and there seems to be no apparent reason
    any help would be magnificent

    Hi Vince,
    vince_email wrote:
    ...The only things that changed were an update to Yosemite, I started using Time Machine to make regular backups...
    Please check this blog post. Updating from Time Machine can cause this issue: Premiere Pro CC, CC 2014, or 2014.1 freezing on startup or crashing while working (Mac OS X 10.9, and later).
    Thanks,
    Kevin

  • Udev not loading the right driver for usbtmc device

    I have a usb beam profiler  and I'm trying to get it to work on arch linux. It works using NI-VISA, so I should be able to communicate with it using usbtmc. However, when I plug it in, it does not show up in /dev.
    I think the problem is that udev is not loading the tmc interface driver when I plug it in.
    Here's a snippet of the output from lsusb -v:
    Interface Descriptor:
    bLength 9
    bDescriptorType 4
    bInterfaceNumber 0
    bAlternateSetting 0
    bNumEndpoints 4
    bInterfaceClass 255 Vendor Specific Class
    bInterfaceSubClass 0
    bInterfaceProtocol 0
    iInterface 0
    I believe that bInterface* should look something like:
    bInterfaceClass 254 Application Specific Interface
    bInterfaceSubClass 3 Test and Measurement
    bInterfaceProtocol 1 TMC
    iInterface 5 TMC488
    Is there a way to force udev to load the right interface? Or is the problem that I'm missing something from my kernel?

    Could you post the entire output of lsusb -v for the device?
    Bus 001 Device 013: ID 1313:8019 ThorLabs
    Couldn't open device, some information will be missing
    Device Descriptor:
    bLength 18
    bDescriptorType 1
    bcdUSB 2.00
    bDeviceClass 0 (Defined at Interface level)
    bDeviceSubClass 0
    bDeviceProtocol 0
    bMaxPacketSize0 64
    idVendor 0x1313 ThorLabs
    idProduct 0x8019
    bcdDevice 0.00
    iManufacturer 1
    iProduct 2
    iSerial 3
    bNumConfigurations 1
    Configuration Descriptor:
    bLength 9
    bDescriptorType 2
    wTotalLength 46
    bNumInterfaces 1
    bConfigurationValue 1
    iConfiguration 0
    bmAttributes 0x80
    (Bus Powered)
    MaxPower 500mA
    Interface Descriptor:
    bLength 9
    bDescriptorType 4
    bInterfaceNumber 0
    bAlternateSetting 0
    bNumEndpoints 4
    bInterfaceClass 255 Vendor Specific Class
    bInterfaceSubClass 0
    bInterfaceProtocol 0
    iInterface 0
    Endpoint Descriptor:
    bLength 7
    bDescriptorType 5
    bEndpointAddress 0x02 EP 2 OUT
    bmAttributes 2
    Transfer Type Bulk
    Synch Type None
    Usage Type Data
    wMaxPacketSize 0x0200 1x 512 bytes
    bInterval 0
    Endpoint Descriptor:
    bLength 7
    bDescriptorType 5
    bEndpointAddress 0x04 EP 4 OUT
    bmAttributes 2
    Transfer Type Bulk
    Synch Type None
    Usage Type Data
    wMaxPacketSize 0x0200 1x 512 bytes
    bInterval 0
    Endpoint Descriptor:
    bLength 7
    bDescriptorType 5
    bEndpointAddress 0x86 EP 6 IN
    bmAttributes 2
    Transfer Type Bulk
    Synch Type None
    Usage Type Data
    wMaxPacketSize 0x0200 1x 512 bytes
    bInterval 0
    Endpoint Descriptor:
    bLength 7
    bDescriptorType 5
    bEndpointAddress 0x88 EP 8 IN
    bmAttributes 2
    Transfer Type Bulk
    Synch Type None
    Usage Type Data
    wMaxPacketSize 0x0200 1x 512 bytes
    bInterval 0
    What device node name are you expecting?
    Not sure, but probably /dev/usbtmc0
    Is there a chance that it is being instantiated as a HID device?  Does /dev/usbhid0 appear?
    Nope, don't have a /dev/usbhid0
    What does the journal say when the device has been attached?
    I'm not sure what you mean, but dmesg says:
    [ 6095.219400] usb 1-1.2: new high-speed USB device number 14 using ehci-pci
    and udevadm monitor says:
    KERNEL[6098.321484] add /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2 (usb)
    KERNEL[6098.321887] add /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0 (usb)
    UDEV [6098.324333] add /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2 (usb)
    UDEV [6098.325356] add /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0 (usb)

  • Datasource 0WS_TAROBJ_ATTR does not extract any record

    I am using the datasource 0WS_TAROBJ_ATTR to get data from CRM to infoobject 0WS_TAROBJ. However, this extractor is not loading any record.
    According SAP information and some forum discussion, I have found that the datasource WS_TAROBJ_ATTR loads data from the table CRM_SVY_RE_TAOBJ.
    There is no data into this table, even in production environment.
    I have found the SAP Note 785261 (CRM survey: Missing entries in table CRM_SVY_RE_TAOBJ) that describes a similar situation. I have applied it and after that I have provide a full repair from 0SVY_DATA_1 in order to fill out this table. However it did not work properly and the table still empty.
    Could you please, someone helps me on this issue?
    Thanks in advance,
    Silvio Messias

    No comments!

Maybe you are looking for

  • How can I add a contact to a group on my iPad Air or IPhone 6?

    I'm away from my computer for a while and was trying to add a contact to a group on my iPad/iPhone. I don't want to download another app to handle this simple task. All my mobile devices are up-to-date and have plenty of memory. I tried logging into

  • I can no longer tab between cells in a table with pages 5.0.

    I use pages everyday for filling in my work booking sheets. I need to have them synching to the cloud, so I can access the client information while on the road. My booking sheet is basically a large table with many cells for name, address, phone numb

  • JSF Data Table in Sequential Level

    Hi All, Assume i have a List and it contains 2 records. I need to display in Sequential Level in Frontend, When i use the below code <h:dataTable value="#{emp.detailList}" var="empVO" headerClass="tableheader" columnClasses="tablecell"> <h:column>   

  • WLST and configToScript problems.....and problems....

    Well I have been running into many different problems with the py that gets created by the configToScript. The simplest of which is if I take a clean domain that has just been configured using the configuration wizard and just add a unix machine and

  • Path Type Tool

    HI There, I just downloaded the trial version of Illustrator CS4.  Question, I am trying to open the text box to click on path type tool and nothing is opening.  NOt only on the test box but any of the other buttons with the arrows for other options.