Firewire module install with rpm not updating "/etc/grub.conf" file

Hello,
Thank you in advance! I am trying to setup Oracle10g RAC on RedHat Enterprise Linux ES 4.0. As a part of that process, I am trying to install the shared disk (Firewire) module on the node using 'rpm' as follows:
rpm -ivh --force oracle-firewire-modules-2.6.9.EL-1286-1.i686.rpm
It is getting installed perfectly. However, I am expecting with "-ivc" option, it is supposed to update "/etc/grub.conf" file. But it is not updating this file. Therefore reboot could NOT load this module and can not proceed further. Any help on this is really appreciated!
Thanks again,
Kishore

karol's link did the deed! I had gone to the page that shows the most up to date mirrors and used that for the install. But when I used the link that karol gave it not only gave me the same URL as I used earlier to install, it gave me some additional suffixes that didn't appear on the page that provided the updated links. When I added /$repo/os/$arch, pacman took off and started burning rubber. So many thanks!
Now I can go ahead and install reflector, which is the first thing I try and do when I get an Arch install up and running. Thanks again.
After seeing karol's script in post#4, I see that the /$repo/os//4arch was showing up there also. I didn't see anything like that when I copied the link to install.
Last edited by pottzie (2012-03-14 02:42:28)

Similar Messages

*** is up with itunes not updating my info??

*** is up with itunes not updating my info. the problem I am still having after 3 weeks is I can not update my credit card/debit card info because itunes says my billing information does not match my bank records. I know this is lunacy because the info I put in is completely correct, i even contacted my bank 3 times to make sure they had my info correct. so obviously something is completely ******** with itunes/iphone in which I cant update my info. **** I cant even download a free app, because it says my info has changed, and I need to change it. when i do, it gives me that stupid message about my info not matching my bank records. Something needs to be done asap.

does itunes support ever respond to these forums??
Since these are user-to-user forums, no they don't.
See this -> iTunes Store Account and Billing

Error after Installing and updating the DADS.CONF file

I was able to get all the software installed for AE 3.0.1 and open the HTTP Server prior to updating the DADS.CONF File.
So far I have not been able any errors in the Apache/Apache/logs directory that point to the issue.
When I put the following DADS.CONF file in place:
# ============================================================================
# mod_plsql DAD Configuration File
# ============================================================================
# 1. Please refer to dads.README for a description of this file
# ============================================================================
# Note: This file should typically be included in your plsql.conf file with
# the "include" directive.
# Hint: You can look at some sample DADs in the dads.README file
# ============================================================================
Alias /i/ "c:\oracle\product\10.2.0\db\Apache\Apache\images\"
AddType text/xml xbl
AddType text/x-component htc
<Locations /pls/apex>
Order deny, allow
PlsqlDocumentPath docs
AllowOverride None
PlsqlDocumentProcedure wwv_flow_file_mgr.process_download
PlsqlDatabaseConnectString ASGUSMAUDV01:1521:APPEXP ServiceNameFormat
PlsqlNLSLanguage AMERCAN_AMERICA.AL32UTF8
PlsqlAuthenticationMode Basic
SetHandler pls_handler
PlsqlDocumentTablename wwv_flow_file_objects$
PlsqlDatabaseUsername APEX_PUBLIC_USER
PlsqlDefaultPage apex
PlsqlDatabasePassword apex
Allow from all
</Location>
I cannot not even access the HTTP Server using the default connect sting. Any help in looking over the DADS.CONF file is appreciated.
Thanks

Contents of the ERROR.LOG
[Tue Aug 21 12:39:44 2007] [notice] FastCGI: process manager initialized
[Tue Aug 21 12:58:33 2007] [notice] FastCGI: process manager initialized
Both of these were using the blank DADS.CONF
Access.log (Blank DADS.CONF)
162.74.53.183 - - [21/Aug/2007:12:40:37 -0400] "GET / HTTP/1.0" 200 15062
162.74.53.183 - - [21/Aug/2007:12:40:37 -0400] "GET /Tab_files/upperbox.gif HTTP/1.0" 200 153
162.74.53.183 - - [21/Aug/2007:12:40:37 -0400] "GET /Tab_files/green-green.gif HTTP/1.0" 200 952
162.74.53.183 - - [21/Aug/2007:12:40:37 -0400] "GET /Tab_files/green-content.gif HTTP/1.0" 200 809
162.74.53.183 - - [21/Aug/2007:12:40:37 -0400] "GET /Tab_files/blue-content.gif HTTP/1.0" 200 37
162.74.53.183 - - [21/Aug/2007:12:40:37 -0400] "GET /Tab_files/asytrnse.gif HTTP/1.0" 200 148
162.74.53.183 - - [21/Aug/2007:12:40:37 -0400] "GET /Tab_files/asytrsm.gif HTTP/1.0" 200 924
162.74.53.183 - - [21/Aug/2007:12:40:37 -0400] "GET /Tab_files/asysrtb.gif HTTP/1.0" 200 901
162.74.53.183 - - [21/Aug/2007:12:40:37 -0400] "GET /Tab_files/asysrt.gif HTTP/1.0" 200 1015
162.74.53.183 - - [21/Aug/2007:12:40:37 -0400] "GET /Tab_files/asylrhs.gif HTTP/1.0" 200 910
162.74.53.183 - - [21/Aug/2007:12:40:38 -0400] "GET /ohs_images/rhshadow.gif HTTP/1.0" 200 59
162.74.53.183 - - [21/Aug/2007:12:40:38 -0400] "GET /Tab_files/asylttb.gif HTTP/1.0" 200 863
162.74.53.183 - - [21/Aug/2007:12:40:38 -0400] "GET /Tab_files/asysrb.gif HTTP/1.0" 200 923
162.74.53.183 - - [21/Aug/2007:12:40:38 -0400] "GET /ohs_images/welcomeHTTP.gif HTTP/1.0" 200 2780
162.74.53.183 - - [21/Aug/2007:12:40:38 -0400] "GET /ohs_images/bisspace.gif HTTP/1.0" 200 43
162.74.53.183 - - [21/Aug/2007:12:40:38 -0400] "GET /Tab_files/asybase.gif HTTP/1.0" 200 49
162.74.53.183 - - [21/Aug/2007:12:40:38 -0400] "GET /ohs_images/tree_document.gif HTTP/1.0" 200 97
162.74.53.183 - - [21/Aug/2007:12:40:38 -0400] "GET /ohs_images/art3.gif HTTP/1.0" 200 18752
162.74.53.183 - - [21/Aug/2007:12:40:38 -0400] "GET /Tab_files/lowerbox.gif HTTP/1.0" 200 150
162.74.53.183 - - [21/Aug/2007:12:40:38 -0400] "GET /ohs_images/relatedapps_cctitle.gif HTTP/1.0" 200 279
162.74.53.183 - - [21/Aug/2007:12:40:38 -0400] "GET /ohs_images/slieghright.gif HTTP/1.0" 200 69
162.74.53.183 - - [21/Aug/2007:12:40:38 -0400] "GET /Tab_files/asytlse.gif HTTP/1.0" 200 830
162.74.53.183 - - [21/Aug/2007:12:40:38 -0400] "GET /ohs_images/home_banner_2.gif HTTP/1.0" 200 6505
162.74.53.183 - - [21/Aug/2007:12:40:38 -0400] "GET /ohs_images/portals.css HTTP/1.0" 200 14795
162.74.53.183 - - [21/Aug/2007:12:40:38 -0400] "GET /ohs_images/space.gif HTTP/1.0" 200 43
I have found no other errors.

Grub not updating using grub-mkconfig

I have created an entry in /etc/grub.d/40_custom. I then ran grub-mkconfig -o /boot/grub/grub.cfg. The entries are there, but when I boot, they don't show up in the menu. Am I missing a step for adding a menuentry to grub?

nullified wrote:
We're going to need more information if we're going to help you.
For a start, post the 40_custom file in code tags, as the.ridikulus.rat asked. Also, you are what? Two questions were asked that this might be a response to.
I have read the wiki. My answer was in response to your question about UEFI-GPT. I believe that I am setup using UEFI-GPT. I followed the instructions at https://wiki.archlinux.org/index.php/MacBook in order to setup dualboot. A few months ago I blew away the mac osx partition and everything works fine. I am trying to add my linux from scratch partition to my grub menu. I can get to the LFS partition fine from the grub shell, so I know my entry is fine. I think that my problem is updating grub image that's registered with the EFI boot record.
Here is my /etc/grub/40_custom file :
#!/bin/sh
exec tail -n +3 $0
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
menuentry "Linux From Scratch" --class os {
insmod ext2
set root=(hda1,5)
linux /vmlinuz-3.13.3-lfs-7.5 root=/dev/sda2 ro
boot
I am unsure how to update the image that EFI is booting. I also might be misunderstanding how EFI works

I was trying to upgrade my iPhone 45 to 5.0.1 OS and received an error, "could not update due to firmware file not compatible". I have Windows PC

No success upgrading iPhone to iOS 5.0.1. Received an error, "could not update due to firmware file not compatible". I have a Windows pc. Help??

Check that and also their is a windows update. Update and try again. email me if you have the same problem I'd be happy to keep helping you with this problem
< Email Edited By Host >

Dreamweaver cs6 does not update links when moving files.

Dreamweaver cs6 does not update links when moving files. I've tried changing my general > settings for "Update links when moving files" to "prompt", and Ive tried "always". Neither work for me. The files are moved fine, but the links don't change. When it's set to "prompt" - I'm never prompted. Is this a bug or is there another setting somewhere?

MadelineCACA wrote:
I haven't define a site. I've opened an index.htm file within a folder structure that I have on my MAC. When I moved a file called art.htm (within the files tab) from a subfolder into the root folder with the index.htm file, it didn't update the image links in art.htm.
In order for DW to manage links, you absolutely MUST Define a Site...
http://tv.adobe.com/watch/learn-dreamweaver-cs5/gs01-defining-a-new-site/
Also, you MUST use the Files tab within DW to move files around within your Defined Site in order for DW to know it needs to update links.

HT201210 MY IPHONE WOULD NOT UPDATE DUE TO FIRMWARE FILE NOT COMPATIBLE

MY IPHONE WOULD NOT UPDATE DUE TO FIRMWARE FILE NOT COMPATIBLE
CAN SOMEONE HELP PLEASE
THANKS TONI

Make sure you are running the latest version of iTunes on your computer (10.6.3). Then, plug your iPhone into your computer with iTunes, and do a Restore.

[solved] No dhcpd : No /etc/dhcpd.conf file

I've managed to get the KDE desktop running, but ever since starting KDE, I haven't been able to connect to anything online. When I tried to check and edit the /etc/dhcpd.conf file, that file doesn't exist. Looked at the Beginner's Guide but didn't see where I skipped whatever I should have done to make the file. Install worked great, so dhcp worked for that.
What do I do to get dhcp to work? Checked /etc/rc.conf and eth0="dhcp" is uncommented.
Last edited by pottzie (2010-05-14 05:11:38)

What do you mean by this?
wrote:Right now I have three, "network netfs crond," "network crond alsa," "and dbus hal networkmanager alsa crond kdm." Hal's seemed kinda "maybe-ish," as when I entered what I thought was suggested, sometimes nothing happened, sometimes some things did
If those are what you are placing in the daemon section of your /etc/rc.conf then that's probably your problem. Don't use networkmanager daemon unless you have 'networkmanager' and 'network-manager-applet' installed.
Try this
(hal syslog-ng network netfs crond alsa)
Look here for network configuration
http://wiki.archlinux.org/index.php/Beg … NG_Section
And here to start KDM using /etc/inittab instead of /etc/rc.conf
http://wiki.archlinux.org/index.php/Dis … mmended.29
Have Fun!

Oracle Linux 6.6 I tried to edit the /etc/resplv.conf file on nano, gedit and VI but the result doesn't appear on the file when I cat it

Oracle Linux 6.6 I tried to edit the /etc/resplv.conf file on nano, gedit and VI but the result doesn't appear on the file when I cat it

Hi ! do you mean the file /etc/resolv.conf ? This file should be by default in the /etc/ diretory and contains the dns-name resolutions. http://linux.die.net/man/5/resolv.conf http://www.tldp.org/LDP/nag/node84.html http://en.wikipedia.org/wiki/Resolv.conf

Print Module templates layouts do not update on the fly

Print layouts do not update on the fly when attempting to choose between various Print Module>Template Browser> Lightroom or User templates. This occurs in all three Layout Styles. The very first layout chosen in Single Image/Contact Sheet, Picture Package, or Custom Package is the permanent 'default' and cannot be changed. The Preview will show as expected however any image stays stuck in the very first layout I chose after installing LR4 beta.
For example, I first chose Template Browser>Lightroom Templates>Maximum Size, and Layout Style>Single Image/Contact Sheet. Clicking through any other Templates (Lightroom or User defined) will alter the preview but not the layout display in the Print window. Same problem in either of the other Layout styles. I have been trying for days to rectify this, but it seems somehow more difficult than LR3. and not what I expect.
As a comparison, using the same steps in LR3 works perfectly as all print template/layouts can be changed on the fly as expected. I have no problems generating different layouts in LR3 and have been using LR print module since version 1 without this issue.
Is this a bug or are there any extra steps or workarounds I have not discovered? Any other testers seen this?

Update with more info. What am I doing wrong, if anything?
Print layouts do not update on the fly when attempting to choose between various Print Module>Template Browser> Lightroom or User templates. This is not a hang since the layouts do not change after the initial choice no matter how much time elapsed.
iMac OS 10.6.8. 8GB RAM.Processor Intel Core 2 Duo. NVIDIA GeForce 8800 GS.
The steps as follows:
1) Lightroom 3.6 & LR4Beta exist side by side.
2) LR4 Beta> Print Module;
3) From filmstrip choose image;
4) Template Browser> Lightroom4Beta Templates>Maximum Size;
5) Preview displays as expected;
6) Layout Styles>Single Image/Contact Sheets
7) Template Browser> Lightroom4Beta Templates>click through any other templates (Lightroom or User defined);
8) Image layout in main window does not update;
9) Previews update;
10) Layout Style>Picture Package;
11) Template Browser>Maximum size is then automatically shown, however the template in the main window is actually (1) 7x5, (2) 2.5x3.5;
12) Any further attempts to change the layouts regardless of Style Layout choices are not successful.
13) Close LR4Beta>re-open LR4Beta;
14) Repeat test;
15) Print Module layouts do not update on the fly as expected;
16) Close LR4Beta and all applications;
17) Reboot iMac.
18) Open LR4Beta only;
19) LR4Beta>Print Module>Template Browser >Lightroom Templates>Maximum Size;
20) Image displays in main layout window with Template and Preview display as expected;
21) Choose different image>Template Browser>Lightroom Templates>Maximum Size;
22) Click through templates, layouts DO NOT update in main window although previews do automatically update.
23) CONCLUSION - In Lightroom 4 Beta>Print Module>Template Browser, image layouts do not change after initial choice as expected.
I posted this on Photoshop.com as a problem.

Install Fail Will not update to 10.7.4 at all

Best Regards
The Problem:
Some days ago I went to upgrade my mac mini 2010.
I downloaded the combo-updater, as this is my preference. I sometimes have trouble with the
normal updater from software update.
When running the install I get this message of error above.
I tried doing it different ways, downloaded the updater numerous times to try again.
I even REINSTALLED OS Lion from the original installer and started over
with the same result, even allowing the installer to dl the update, as it
asked to do so.
So I completely started over with a clean re-partitioned drive and had the same result.
I tethered it to my macbook pro 2010 in FIREWIRE TARGET mode and tried
installing it that way, same result.
I have also just let the Software Updater utility run and allow it to install
the downladed update. That activity returns a "cannot expan" error message...
End result: It will not for any reason install this update.
This is a problem I have never encountered (in 25 years of using macs).

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Console in the page that opens.
Select "/var/log/install.log" from the file list. Post the messages from the last installation attempt, starting from the time when you launched the Installer or Software Update.
Post the log text, please, not a screenshot. If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.

Itunes will not update. I get an message saying that it cannot verify signature and it will not install, itunes will not update. I get an message saying that it cannot verify signature and it will not install

iTunes will not update. I get an error message saying that it cannot verify signature and it will be unable to install.

Yeah me too try going through the apple website in (firefox) and download iTunes there. Currently that's what I'm doing.

Has anyone else had trouble with apps not updating when you update through the app store?

I'm having trouble with GSN Games app not updating, even though the app store says that it's the most updated version. Has anyone else experienced this? My mother's app updated just fine with all the new features and games within the app, but mine didn't update the same. We both have ipad2 running on ios 7.0.06. I can't figure this out. New games were added to the app that I'd like to play, but can't because of this.
Any suggestions before I contact the app developer?
Thanks so much for you help.

I frequently get my connection is to slow for play.
Tap Settings / General / Reset / Reset Network Settings.
Restart your iPhone.
Try again.

Pages with Templates not updating?

I made a template page (saved in templates folder), then did a SAVE AS to create my other pages.
When I tried to update a template (repeating region), it does not seem to update the other pages (files updated = 0)
The site is managed as well.
HELP!!! It's driving me nuts!

Vannon wrote:
I made a template page (saved in templates folder), then did a SAVE AS to create my other pages.
Oh wait, I read your initial post more closely. You did not create your pages correctly. You do not use SAVE AS from your template file to create the other pages.
What you do is create your template and 'Save as Template'
Then to actually build your pages, File => New => Page from Template (see image)
Brad Lawryk
Adobe Community Expert, Dreamweaver
Adobe Usergroup Manager, Northern British Columbia Adobe User Group

Itunes 7 upgrade will not install. Do not have privileges to modify file.

I have been having problems with itunes in that when I open itunes and then close it, my volume is no longer available. So I have been trying to install an updated version of 7.1 but when I try to install it says I do not have permission to modify file. I look at the files that the error code says and they are read-only files. I uncheck the read-only but the file will not STAY as read only and seems to default to read-only.
Can anyone help? Thanks.

Heya. I've found some articles that may help you out:
Trouble installing or opening iTunes or QuickTime for Windows
http://www.info.apple.com/kbnum/n93976
iTunes and QuickTime for Windows XP cannot be installed without Visual Basic Script (VBScript)
http://docs.info.apple.com/article.html?artnum=304405
How to set, view, change, or remove file and folder permissions in Windows XP
http://support.microsoft.com/default.aspx?scid=kb;en-us;308418
Let me know if any of that helps. If not, I am sure I can do some more digging.
Also, do you have an other users/accounts in XP? If so, you may want to try the update in that user. If not, try creating a new user (with admin abilities) and doing the update.
=)

Firewire module install with rpm not updating "/etc/grub.conf" file

Similar Messages

Maybe you are looking for