FireWire non-functinal after 10.6.4 Update

After installing the latest Mac OS X update (10.6.4), I wasn't able to connect my iMac (Nov. 2007) to my MacBook Pro (Jun. 2009) via FireWire.
I used to be able to see the other Mac popup in the Sidebar of Finders. I tried using the Migration Assistant, but neither Macs was able to establish a connection.

First try to Reset your PRAM in both Macs and try the connection again. Plus make sure the cable is good too.

Similar Messages

Messages stopped recognsing non iPhones after 10.10.1 update. iPhone 6 and Mac on same wifi and both have iCloud on. Any ideas?

Messages stopped recognsing non iPhones after 10.10.1 update. iPhone 6 and Mac on same wifi and both have iCloud on. Any ideas?
Messages stopped recognsing non iPhones after 10.10.1 update. iPhone 6 and Mac on same wifi and both have iCloud on. Any ideas?

Handoff Continuity Troubleshooting

Firewire stop functioning after 10.4.7 update

Hello all,
I have been bitten by one of those update bugs. I ran software update this morning on my Powerbook G4 DVI. Eventually, I got the machine to restart after about 20 minutes of nothing. Everything ran fine for the most part until I tried to connect an external DVD burner. The drive is a Lite-On Lightscribe model that ran just perfectly well before the update. After the update, no luck. In fact no firewire device works on the machine despite the firewire drive showing up in the System Profiler. I have tried 2 different Macally Firewire enclosures and a first gen 5 GB iPod to same effect. The enclosures work well if I use them in the USB port. Sadly, I have only USB 1.1 on my machine and that speed is insufficient for my use.
Any help in resolving this would be greatly appreciated.

Do you mean the cache files? If so, I've never have. The only cache files I routinely delete are Safari's. For troubleshooting startup issues, I rely on:
http://docs.info.apple.com/article.html?artnum=25392
http://docs.info.apple.com/article.html?artnum=106805 and
http://www.thexlab.com/faqs/startupitems.html.
In the six years I've been running this machine, the only problem I ever had was a corrupted HD that I couldn't erase or reformat three years ago.

IPod mini can't see firewire power adapter after 1.4.1 update

I updated my mini to the (infamous) 1.4.1 update, and now my firewire connection doesn't appear to work. When plugged into the computer with the firewire cable, mini doesn't appear on desktop or in iTunes, though it will start recharging the battery. When firewire power adapter is plugged into dock or into mini to try to recharge, it doesn't work. I purchased a new firewire cable & adapter but it's behaving the same way. USB cable to computer works fine (mini shows up on desktop and in iTunes). I've tried the Reset, Retry Restart, Reinstall, Restore. protocol several times with no success. I've tried Resetting the mini while plugged into the firewire power adapter. No luck.
Any suggestions?
Is there a way to uninstall this update?
g5 Mac OS X (10.4.4)

Thanks Chris - I did this, and am now running the earlier version of the software, but my iPod still can't see my power adapter. Any ideas about this?

Iphone shuts down after a few minutes of non-use (after 1.1.3 update)

After the update, if I do not use the iphone for a few minutes it basically goes dead and I need to power it on and it reloads the system...I tried to reinstall the update, delete all my data and start fresh...nothing has worked...I really do not know what else to do...it really seems a software issue...
Any thoughts? Thanks,

i am having the same problem... i turned the auto-lock off so my phone never sleeps and in return it runs my battery down even faster and calls people on accident... even more odd is that the car charger i bought from at&t has alweays worked fine until the 1.1.3 update and it all of the sudden started sayin that this accessory wasn't designed for an iphone and that i should put it in airplane mode so i wouldn't get interference... i have restored several times and nothing helps... i have been all over the net looking for a fix but finally had to call apple and they are sending me a loaner and i have to ship mine back to them for repair... should be here tomorrow (i hope)... beware there is a $30 loaner phone fee... as bad as it sounds i'm glad to hear that i'm not the only one with this problem...

External Firewire hard drive won't mount after 10.4.10 update

I see many posts about USB drives not mounting after 10.4.10 update. Just lending my voice to that issue (my USB drive won't work either) as well as the 10.4.10 update breaking Firewire drives.
Hope a fix is coming. No backups are scaaaary.

How to fix the problem of a missing external Hard Drive (Firewire) after it vanishes from you desktop after installing 10.4.10 update.
I have a iMac PPC (Non intel). Aparently my system upated installed the wrong version of 10.4.10 and thus my external firewire hard drives a 320 GB Westerndigital My Book, and Acomdata 80 GB, and aWestern Digital 160 GB media center all vanished from the desktop.
The instructions below should be credited to several different people. I found various version of these steps in the Discussion. I combines a few of them into this one 10 step fix and it worked for me. I hope it works for you.
1) Shut down you computer
2) Unplug all peripherals (i.e USB and Firewire, I left computer power plug in as well as ethernet and Keyboard+ Mouse) and leave along for 30 Minutes
3) Restart holding down the Command (Apple) + Option + P + R keys for three startup bongs, then release the keys and your computer will start up as usual.
4) Verify and repair disk Permission using Disk Utility. (Several things were repaired here)
5) Instal 10.4.10 Combo PPC
6) Restart Again
7) Again repair Disk permissions (None of mine needed to be repaired fyi this time)
8) Unplug Power cable and Firewire cable from External Hard Drive (leave along for 1 minute)
9) Reconnect power to Firewire External Drive first then the Firewire cable to the drive second, then the firewire cable from the Drive to the computer last.
10) Turn on your Firewire Drive... you will head it spin up and eventually show up on your desktop just like it did before the 10.4.10 update.

Mac App Store non responsive after trying to update to OS X 10.10.3

Mac App Store non responsive after trying to update to OS X 10.10.3. Machine froze, and after rebooting App Store does not work. Force Quit menu shows two items as unresponsive - App Store and App Store Web Content.

This procedure will delete certain temporary and cache files used by system processes. The files are automatically generated and don't contain any of your data. Occasionally they can become corrupt and cause problems such as yours.
Back up all data before proceeding.
Triple-click anywhere in the line below on this page to select it:
/var/folders/zz
Right-click or control-click the highlighted line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with a subfolder named "zz" selected. Move that subfolder to the Trash. You may be prompted for your administrator login password. Restart the computer and empty the Trash.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

No FireWire after 10.5.6 update

my LaCie external HD cannot be mount after 10.5.6 update.
i.e. can't mount by firewire 400/800
only work for USB
do U know how to solve it?

Uncle D wrote:
Has probably something to do with one of the latest OS X updates, because I've used this disk with Time Machine now more than a year and never had a problem.
Then why are all my LaCie d2s fine, including the TM LaCie?
Have you tried resetting the firewire ports as I mentioned? Also, try this:
Launch/Utilities/Terminal and enter this command at the prompt:diskutil listPress return. If it sees the disk, note the number of the disk (far left column) you want to unmount.
Then, enter this command:mount /dev/(number of disk)Press return. Just enter the number without parenthesis.
-mj
Message was edited by: macjack

I tried to update the latest software update for my MacBook pro (which was on 10/12) and after it started to update it restarted like normal but when it started back up it was running painfully slow and none oft programs will open.They all quit unexpectal

I tried to update the latest software update for my MacBook pro (which was on 10/12) and after it started to update it restarted like normal but when it started back up it was running painfully slow and none oft programs will open.They all quit unexpectedly. iTunes microsoft word all of them quit unexpectedly. Help!

Exact same problem with my 2010 MBP 2.4ghz 4gb ram 10.6.8. iTunes said update was needed, Software Update ran with various updates including a security update, truthfully didn't pay much attention, I always install the Apple updates. After the restart it took 3-4 times longer than normal to get to the login screen, same to get to the desktop but I'm familiar with that occurring on update restarts. Unfortunately it got worse from there. Performed a full shutdown and startup. Same long boot. After the desktop finally loads every mouse button press received a 2 minute beachball. I use menu-meters and both processors are under 10%. Waited a few minutes for disk utilities to launch, repair permissions estimates 3 hours for a typical <10 minute process. Activity monitor shows nothing over 10% CPU most of the time however ReportCrash pops to the top often. Any suggestions would be greatly appreciated. BTW zero problems until this update.

My app iBooks keeps crashing non-stop after I allow all internet connections that iBooks asked for! I have tried to update OS Maverick, I've tried to restart etc. but it's just keeps crashing.. Please help.

My app iBooks keeps crashing non-stop after I allow all internet connections that iBooks asked for! I have tried to update OS Maverick, I've tried to restart etc. but it's just keeps crashing..
Please help.

Hello there, Goraksanat.
The following Knowledge Base article offers up some good pointers for troubleshooting your issue:
OS X Mavericks: If an app freezes or quits unexpectedly
http://support.apple.com/kb/PH13975
Additionally you can try an SMC reset as it is recommended for:
Applications may not function correctly or may stop responding after being opened.
Intel-based Macs: Resetting the System Management Controller (SMC).
http://support.apple.com/kb/ht3964
Thanks for reaching out to Apple Support Communities:
Cheers,
Pedro.

How long is an 'abnormally long' time to boot after 10.4.8 update?

How long is too long to wait for my macBook Pro to take to boot up after installing the latest update?
An hour?
2 hours?
A day?
I installed from Automatic Updates and shutdown rather than restart. Came abck hours later turned on powerer and waited and waited. After about an hour I tunred it off booted from the install CD, ran the disk utility, fixed a few permission and rebooted...
Should I take it in to the Apple Store tomorrow morning if this continues or reinstall the OS and start over?

Hello dn:
As an aside, comparing Windows to OS X is like
comparing a plow horse ready for the glue factory to
a thoroughbred race horse. I use both every day and
have for years, so I have vivid daily comparisons.
Now then, as I indicated above, you probably caused
the problem by interrupting the software update
process. At a guess, you have clobbered directories
(you, not Apple). The first step would be to run
repair disk from your software install DVD (boot it,
holding down the "C" key). Repair disk is found in
the disk utility. If that works, you should be back
to the point where you can reinstall the combo
updater. There is also an excellent third party
program (mentioned above) called DiskWarrior (pricey
at about $90, but worth it if it saves the day).
If none of that works, you probably should do an
archive and install:
http://docs.info.apple.com/article.html?artnum=107120
A good back up/retreat strategy is just good
computing practice whether or not you are a computing
professional. There are several approaches. I make
bootable clones of all my iMacs on an external
firewire drive using a little program called
SuperDuper (&28 at www.shirt-pocket.com). The
bootable clone gives me almost complete protection
against hardware or software problems.
By the by, these forums are user-to-user. Everyone
is a volunteer - not an Apple employee. Apple
monitors/moderates the forums and provides an
excellent resource. If you are new to Macs (as your
post seems to indicate), you should spend some time
browsing the forums and using the tools available -
including the excellent library of knowledge base
articles.
Barry
OK, So I'm a cry baby.
But I do not buy your argument that it was all my fault. After I inrterupted the hour ling gray screen and ran and fixed a few previlige problems and tried again over 2 hour went by with nothing but the gray screen.
Archive and intall did get me back and running, but by now 4 -5 hours of my life are gone that I want back!
And the tone on this whole board seems to be we MacBook owners, who unsupectingly trusted Apple and let the Automaitic Software Update have its way with a computer that was functioning just fine, the result of which is a computer that needs to have the OS reinstalled, are at fault for having poor prior knowledge?
I bring up Microsoft because they are BAD. They have an OS that allows 3rd parties to install code to render your computer useless at best, a robot of evil at worst.
Yet here we have the Apple, a trusted known entity and the manufacture of not only the hardware but the OS handing us an install that should have just WORKED.
So al I can think is the Delta install is the culprit, since I had previously been on 10.4.7 and the Archive & Install put in 10.4.6. The Combined installer is ok.
Again MacBook owners are victimized for keeping current?
Some one at Apple deserves a dummy slap at least.
MacBook owners represent the "Switchers". They bought on style and a promis of stability and reliability. Not the allure of becoming UNIX Geeks or even Uber User or browsers of forums. They came from that dull gray world out there where viruse roam but if you let automatic updates run and loaded up with antiv virus and spyware scanners, things pretty much worked.
I'm not new to mac as I have been usinge them since I shelled out $3,500 for a Mac SE. (Don't laugh). I gave up however being a Uber User and I at least am tenaciouse enought to find this discussion board. I suspect there are going to be a lot of busy Mac "Geniouses" for the next few days as ordinary computer users stream in with MacBooks with gray screens.
You know Sony support totally *****, but they are rated the best on the PC side for customer satisfaction. Why? You almost never have to seek support from Sony.
Again I'm just ******** 'casue it happend to me on a new laptop that was bone stock. Its working now so problem solved.

TS1372 After the latest iTunes update iTunes no longer sees either of my ipods. Diagnostics says no ipod connected. However my laptop, which is running Window 8.1 does see the ipod.

After the latest iTunes update neither of my iPods are recognized by iTunes, so I am unable to sync. When I run diagnostics it says no device connected. My laptop sees my iPod so I know it is connected. I have tried all of the recommended iTunes fixes and none work. I tried deleting and reinstalling both an older version and the newest version. The older version would not reconize my music libray. Any thouhts?

I tried deleting and reinstalling both an older version and the newest version.
Doublechecking. Have you also tried a complete uninstall of both iTunes and all the other related software components and then a reinstall? If not, try the instructions from the following document:
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8

IPad2 Issues after iOS 8.1 update

iPad2 64g wifi + cellular -   very slow and non-responsive since iOS 8.1 update. nonstandard Apps seem to be working fine.. it’s the standard item like photos and safari that don't respond.
photos - (which I use daily to show clients examples) will freeze and kick me out back to the home page when trying to do anything from open a photo for viewing to trying to delete a photo. Edit.. forget it.   better off using an alternate app to edit a photo as it locks up and crashes every time.   I really need to be able to view the photos on my iPad2
safari -   good luck using any hyper link…. It doesn’t respond.   Even at Apple’s website.   Sometimes it crashes but most of the time it just ignores me like I haven’t touched the screen
Overall - the touch screen is glitchy since the iOS 8.1 update. It was slow after the iOS 8.0 update but has become almost unusable after the 8.1 update.
I cannot afford to purchase a new iPad. And I really need to find a way to make this one work.
I did read about how to restore to an older iOS version.   The only problems are all of my laptop is Windows based and the instructions assumed you had a Mac.   I did a backup to iTunes prior to the 8.0 update but I have also done backups since.   So I am not sure I have a “clean” iOS 7 backup.
Any ideas would be appreciated   Thank you in advance for your help
Deborah

zooga wrote:
safari -   good luck using any hyper link…. It doesn’t respond.   Even at Apple’s website.   Sometimes it crashes but most of the time it just ignores me like I haven’t touched the screen
For the touch issues in Safari, does scrolling or zooming the page before you try to tap a link make it work again? I've read a few posts that this may be a workaround for that issue.

After the last Yosemite update on my MacBook pro I turned the FileVault on, now my Mac is freezing all the time and encrypting the drive looks like going to last forever and I am unable to use my MacBook pro what must I do???!!!

after the last Yosemite update on my MacBook pro I turned the FileVault on, now my Mac is freezing all the time and encrypting the drive looks like going to last forever and I am unable to use my MacBook pro what must I do???!!!

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB ' com.adobe.AAM.Updater-1.0 com.adobe.AAM.Updater-1.0 com.adobe.AdobeCreativeCloud com.adobe.CS4ServiceManager com.adobe.CS5ServiceManager com.adobe.fpsaud com.adobe.SwitchBoard com.adobe.SwitchBoard com.apple.aelwriter com.apple.AirPortBaseStationAgent com.apple.FolderActions.enabled com.apple.installer.osmessagetracing com.apple.mrt.uiagent com.apple.ReportCrash.Self com.apple.rpmuxd com.apple.SafariNotificationAgent com.apple.usbmuxd com.citrixonline.GoToMeeting.G2MUpdate com.google.keystone.agent com.google.keystone.daemon com.microsoft.office.licensing.helper com.oracle.java.Helper-Tool com.oracle.java.JavaUpdateHelper com.oracle.java.JavaUpdateHelper org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.startx ' ' 879294308 4071182229 461455494 3627668074 1083382502 1274181950 1855907737 2758863019 1848501757 464843899 3694147963 1233118628 2456546649 2806998573 2778718105 2636415542 842973933 2051385900 3301885676 891055588 998894468 695903914 1443423563 4136085286 523110921 3873345487 ' 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<10) print "com.apple.";} ' ' { sub(/ :/,"");print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\$[0-9]+\$\$.+\$/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"cksum "F|getline C;split(C, A);C="checksum "A[1];"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F" ("T", "C")";else F=F" ("C")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */ /;' ' s/^.+ |\(.+$$//g;p ' '/\.(appex|pluginkit)\/Contents\/Info\.plist$/p' ' /2/{print "WARN"};/4/{print "CRITICAL"};' ' /EVHF|MACR/d;s/^.+: //p;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps crontab iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl smcDiagnose sysctl\ -n defaults\ read stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' pluginkit scutil dtrace profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil lsof test osascript\ -e );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$(RefProc): \$Message' -k Sender Req 'fsev|kern|launchd' -k RefProc Rne 'Aq|WebK' -k Message Rne 'Goog|ksadm|probe|Roame|SMC:|smcD|sserti|suhel| VALI|ver-r|xpma' -k Message Req 'abn|bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|NVDA$|pagin|proc: t|Roamed|rror|SL|TCON|Throttli|tim(ed? ?|ing )o|WARN' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,Ex}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,In{p,ter},iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????|wc -l' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' " -F '\$Time \$Message' -k Sender kernel -k Message CSeq 'n Cause: -' " );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors App\ extensions Lockfiles Memory\ pressure SMC Shutdowns );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};A'$((7+i))'() { v=` eval sudo "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};';done;A9(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2 7 8;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;B1&&D73 19 53 67 55;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 54 12 56;D23 5 14 12 14;D22 6 36 13 15;D22 20 52 66 54;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D82 35 49 61 51;D82 11 17 17 20;for i in 0 1;do D82 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A8 18 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;B3 4 0 65;A3 14 6 32 0;B4 0 16 11;A1 26 50 64;B7 16;C3 52;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D73 21 0 32 19;D73 10 42 32 40;D82 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 21 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D83 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 10 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 21 48 49 49;B3 4 22 57;A1 21 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D12 4 51 32 53;D23 22 9 37 7;A9;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

After 10.9.4 Update: Mail Messages Grey Out Upon Deleting-Don't Move to Trash?

Hello,
After 10.9.4 Update/MacBook Pro with Retina display: Mail Messages Grey Out Upon Deleting-Don't Move to Trash? I believe I must join those who are having trouble with mail after this latest update. Deleted messages just turn a light grey in the message panel and don't move to trash until after I quit and restart mail. I have also experienced the screen "Freezing" ... no spinning beach ball, just the pointer frozen. This has happened only when I use mail and requires a "hard" re-start to correct. Is this a "feature" of the update, or is it a problem? Thanks!

Some of your user files (not system files) have incorrect permissions or are locked. This procedure will unlock those files and reset their ownership, permissions, and access controls to the default. If you've intentionally set special values for those attributes, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it, but you do need to follow the instructions below.
Back up all data.
Step 1
If you have more than one user, and the one in question is not an administrator, then go to Step 2.
Enter the following command in the Terminal window in the same way as before (triple-click, copy, and paste):
sudo find ~ $TMPDIR.. -exec chflags nouchg,nouappnd,noschg,nosappnd {} + -exec chown $UID {} + -exec chmod +rw {} + -exec chmod -N {} + -type d -exec chmod +x {} + 2>&-
This time you'll be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command may take several minutes to run, depending on how many files you have. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1, if you prefer not to take it, or if it doesn't solve the problem.
Start up in Recovery mode. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open. In that window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your startup volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button
Select
 ▹ Restart
from the menu bar.
Quit Mail and empty the Trash. If you still can't, log out or restart the computer.

FireWire non-functinal after 10.6.4 Update

Similar Messages

Maybe you are looking for