Firewire not detected by FCP with OS-X 10.4.10 (Tiger), worked fine w 10.3.

Hi all, hope some one can help, I just upgraded to Tiger OS (OX-X 10.4.10) from latest updated OS, now FCP dos not find the 720 x 480 Firewire Device for external video, I use an ADVC 110 converter that was working very well to "Print Video to Tape" on a betaca SP VTR, i readed most of the support pages, did the erase FC preferences on user folder, reinstalled FCP 4.5 (That is my FCP Version), also downloaded and installed the FCP 4.5 Update from the FCP Update Webpage, Also erased the complete FCP an all referenced files on my hard disk and reinstalled FCP, last i did was connect my Sony DSR 300 Camera and still FCP can't find it, It's only not detected on FCP, the computer DOES recognize both (ADVC and Camera) on the Firewire connection at System Proffiler, do you think that an OSX Clean Install would fix this ?

Before you updated to 10.4.10 did you do a search of these forum pages to discover what you were doing was going to be wrong? Evidently not. There are literally dozens of messages like yours warning of what would happen.
FCP 4.5 was optimized for OSX 10.3. Some people have been able to run it on OSX 10.4. But it's not designed to run with that.
Did you also update your Quicktime to 7.2? If so that will break many things. You must go back to Quicktime 6 with updates.

Similar Messages

TS3048 unable to connect to keyboard. System does not detect keyboard even after switching on and off. Mouse working fine. Earlier was working fine. Keyboard is not detectable by I mac . Tried a different keyboard same problem.

Changed batteries of keyboard -initially connected but now does not connect. Used a diffeerent keyboard -same result. Keyboard not seen in bluetooth devices.Switching on and off as well as re booting has not helped. Keyboard light continues to blink.

Hey Gautam5058,
Thanks for the question, and welcome to Apple Support Communities.
The following articles provide troubleshooting steps that may help to resolve your issue:
Apple Wireless Keyboard: Difficulty during pairing process
http://support.apple.com/kb/TS1569
Bluetooth Quick Assist
http://support.apple.com/kb/HT1153
You may also want to try resetting your computer's PRAM and NVRAM.
To resolve this issue:
1. Turn the Apple Wireless Keyboard off.
- For an aluminum Apple Wireless Keyboard, hold the keyboard's power button for more than 3 seconds.
- For a white Apple Wireless Keyboard, turn over the keyboard, and turn the power switch to the off position.
2. Click the "Continue" button as the Setup Assistant instructs.
3. Power the Apple Wireless Keyboard back on.
4. Enter the 8-digit passkey and press Return. Important: You MUST press Return after you enter the 8 digit code.
Thanks,
Matt M.

FaceTime Camera not detected @ Google Hangout with OS X Mavericks 10.9

after i update my mac book air 2013 mid, my FaceTime Camera not detected @ Google Hangout with OS X Mavericks 10.9

ekeong wrote:
after i update my mac book air 2013 mid, my FaceTime Camera not detected @ Google Hangout with OS X Mavericks 10.9
If the problem is only with Google Hangout, take a look at FaceTime Camera not detected @ Google Hangout with OS X Mavericks 10.9 - Google Groups. You may need to wait for a google update or contact Google Support.
If ithe trouble is with other apps, too, see Apple's http://support.apple.com/kb/HT2090
(Over time, Apple has changed the built-in camera's name on newer Macs from "iSight" to "FaceTime" and then to "FaceTime HD." Regardless of the name of your Mac's built-in camera, the same info and troubleshooting applies.)
Message was edited by: EZ Jim
Mac OSX 10.8.5

Rotate tool not working in cs6. It says "Could not complete your request because it only works with OpenGL enabled document windows." Its worked fine in the past....

Rotate tool not working in cs6. It says "Could not complete your request because it only works with OpenGL enabled document windows." Its worked fine in the past....
-CharlieH23

Copy and paste only this area, you may have to scroll down.
Adobe Photoshop Version: 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00) x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:10, Stepping:9 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
Physical processor count: 2
Logical processor count: 4
Processor speed: 2494 MHz
Built-in memory: 6019 MB
Free memory: 3360 MB
Memory available to Photoshop: 5227 MB
Memory used by Photoshop: 60 %
Image tile size: 128K
Image cache levels: 4
OpenGL Drawing: Enabled.
OpenGL Drawing Mode: Advanced
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
OpenGL Allow Old GPUs: Not Detected.
OpenCL Version: 1.2
OpenGL Version: 2.1
Video Rect Texture Size: 16384
OpenGL Memory: 2112 MB
Video Card Vendor: Intel
Video Card Renderer: Intel(R) HD Graphics 4000
Display: 1
Display Bounds: top=0, left=0, bottom=768, right=1366
Video Card Number: 1
Video Card: Intel(R) HD Graphics 4000
Driver Version: 10.18.10.3958
Driver Date: 20140930000000.000000-000
Video Card Driver: igdumdim64.dll,igd10iumd64.dll,igd10iumd64.dll,igdumdim32,igd10iumd32,igd10iumd32
Video Mode: 1366 x 768 x 4294967296 colors
Video Card Caption: Intel(R) HD Graphics 4000
Video Card Memory: 2112 MB

I use a two button mouse with my Mac Book Pro. It works fine, but after installing Lion, the mouse wheel goes in reverse of what it did (rolling the wheel towards your palm goes up not down the page). Anyone know how to fix this?

I use a two button mouse with my Mac Book Pro. It works fine, but after installing Lion, the mouse wheel goes in reverse of what it did (rolling the wheel towards your palm goes up not down the page). Anyone know how to fix this?

First sentence in OPs question:
I use a two button mouse with my Mac Book Pro
I guess the track pad settings would look similar to my screen shot?
Regards,
Colin R.

Problem is occurring in docx format; it is not printing "New Line" character in extracted txt using IFilter (offfiltx.dll) while with doc file IFilter (OffFilt.dll) is working fine.

Problem: Problem
is occurring in docx format; it is not printing “New Line” character in extracted txt using IFilter (offfiltx.dll) while with doc file IFilter (OffFilt.dll) is working fine.
Environment: -
Operating
System:
Windows XP SP2/7
Language:
C#
MS
Office Version: - MS Office 2007/2010/2013
Problem
Description: -
We
havedocx
file with new line character, and we are processing this file in IFilter for extracting text, and it is giving output with concatenation of lines.
Docx
file format (Sample.docx)
Test this music
Word processing
Testing docx file
Output:
- Test this music Word processing Testing docx file
Requirement:
- We
have requirement to get following text in particular format with New Line from docx because client is using docx format only.
Test this music
Word processing
Testing docx file
Attempt:
We have tried a lot after changing IFilter configuration,
but it is not giving required output. Then we saved same file in doc format (Sample.doc), which is giving required output.
Because it is application specific problem, kindly
assist to resolve issue on priority. We are sharing IFilter paths for extracting text for doc and docx.
Doc Filter Location: - %systemroot%\system32\OffFilt.dll
Docx Filter Location: - <Drive>:\PROGRA~1\COMMON~1\MICROS~1\Filters\offfiltx.dll
Code Snippet for setting property of filter
internal static IFilter LoadAndInitIFilter(string fileName, string extension)
            IFilter filter
= LoadIFilter(extension);
            if (filter
== null)
                return null;
            IPersistFile persistFile
= (filter as IPersistFile);
            if (persistFile
!= null)
persistFile.Load(fileName, 0);
                IFILTER_FLAGS flags;
                IFILTER_INIT iflags
=
                            IFILTER_INIT.CANON_HYPHENS
|
                            IFILTER_INIT.CANON_PARAGRAPHS
|
                            IFILTER_INIT.CANON_SPACES
|
                            IFILTER_INIT.APPLY_INDEX_ATTRIBUTES
|
                            IFILTER_INIT.HARD_LINE_BREAKS
|
                            IFILTER_INIT.FILTER_OWNED_VALUE_OK;
                if (filter.Init(iflags,
0, IntPtr.Zero, out flags)
==IFilterReturnCode.S_OK)
                    return filter;
            Marshal.ReleaseComObject(filter);
            return null;
Kindly
assist to resolve this issue and also let us know if any input is required.
For any help, we would be really
thankful.

Kindly
assist to resolve this issue and also let us know if any input is required.
For any help, we
would be really thankful.

TS4268 I have NEVER been able to activate my iMessage on iPad with Retina Display - My Apple ID/Password works fine on all other programs. iSO is up to date. No troubleshooting has worked. Any tips please?

I have NEVER been able to activate my iMessage on iPad with Retina Display - My Apple ID/Password works fine on all other programs. iSO is up to date. No troubleshooting has worked so far. Any tips please?

FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. If you did not do step 4 properly, start all over again.

I had 3 versions of FF and had to redo the HD and now no version will install says "Can't open output file" i have winddows 7 64 bit 8 GB memory and 1T HD but i have it on my other desktop and laptop with less memory and HD space and works fine

I had 3 versions of FF and had to redo the HD and now no version will install says "Can't open output file" i have winddows 7 64 bit 8 GB memory and 1T HD but i have it on my other desktop and laptop with less memory and HD space and works fine laptop has windows 7 64 bit and other desktop hook to my 32" tv has win 7 32-bit i lso did clean removal of all versions of FF and did new DLs with screen shots of it DLing, complete of DL and after i got the error again.

i am posting this as a reply due to it would not allow me to attach screen shots except for this way

Ok....I have a 2012 MBP that has Yosemiti installed. The airplay works from iTunes, but when I try to mirror from the desktop I get the "no device detected" message. Airplay on all of my other devices work fine. Has anyone else had this issue?

Ok....I have a 2012 MBP that has Yosemiti installed. The airplay works from iTunes, but when I try to mirror from the desktop I get the "no device detected" message. Airplay on all of my other devices work fine. Has anyone else had this issue?

Hey Marco'96,
Welcome to the Apple Support Communities! I understand that you are experiencing issues with AirPlay mirroring in OS X to your Apple TV. The following resource includes helpful troubleshooting steps towards the end of the article, which may resolve your issue:
About AirPlay Mirroring in OS X - Apple Support
http://support.apple.com/HT201343
Thanks,
Matt M.

Why does my ipad2 no longer receive photos on iMessage? Iphone works perfectly with iMessage photos. Ipad2 used to work fine. Is it an ios8 issue? Help!

Why does my ipad2 no longer receive photos on iMessage? Iphone works perfectly with iMessage photos. Ipad2 used to work fine. Is it an ios8 issue? Help!

Hello,
Where may I be able to contact and speak with a prepaid representative? Strictly through phone calls? (I am at work 12 hours a day)
And I apologize for posting in the wrong area - I saw Apple support so I went here.
I'm almost certain my phone is the problem. I have gone through resetting the network settings a dozen times on my phone, even did it on my dad's. Now my texts are beginning to do the same when I text my fiance.
Resetting the network settings DOES work -- the problem is it will work for a day or two or for only a few hours - then I'll have to do it all over again.

I have built a android application using adobe flex, and i have exported it with native air. The application is working fine on samsung phones whereas it is getting crashed on Moto Phones, which runs on android kitkat, is there any compatibility issue ?,

I have built a android application using adobe flex, and i have exported it with native air. The application is working fine on samsung phones whereas it is getting crashed on Moto Phones, which runs on android kitkat, is there any compatibility issue ?, I have built a android application using adobe flex, and i have exported it with native air. The application is working fine on samsung phones whereas it is getting crashed on Moto Phones, which runs on android kitkat, is there any compatibility issue ?, I have built a android application using adobe flex, and i have exported it with native air. The application is working fine on samsung phones whereas it is getting crashed on Moto Phones, which runs on android kitkat, is there any compatibility issue ?

Thanks, Flex harUI, for the direction in regards to isolating build changes. That aside (still working on it), can you offer any direction in regards to my original question on SDK and AIR compatibility? I'm specifically looking for a version compatibility mapping or anything that definitively states, "Flex SDK x.y.z works with the following versions of AIR". This information is crucial for us in order to more specifically plan our own roadmap built upon these two frameworks as we consider both existing installations of our software and future distributions.

HT3819 I have an intel iMac OS 10.6.8 with iTunes 11.0.2 and an Apple TV with software 5.2. Home sharing worked fine until I added a VoIP device to my wired ethernet network. Now Apple TV cannot recognize my computer. How can I reconfigure?

I have an intel iMac OS 10.6.8 with iTunes 11.0.2 and an Apple TV with software 5.2. Home sharing worked fine until I added a VoIP device to my wired ethernet network. Now Apple TV cannot recognize my computer. How can I reconfigure?

I have an intel iMac OS 10.6.8 with iTunes 11.0.2 and an Apple TV with software 5.2. Home sharing worked fine until I added a VoIP device to my wired ethernet network. Now Apple TV cannot recognize my computer. How can I reconfigure?

I have car charging problems,my 4s won't charge with tomtom car kit,my old 3GS worked fine,tried a belkin charger had same problem

I have car charging problems,my 4s won't charge with tomtom car kit,my old 3GS worked fine,tried a belkin charger had same problem.
Any ideas I'm pulling my hair out !!!

Seems to be a hardware issue and you'll have to get it checked by visiting an Authorized Apple Service Provider, an Apple Store , to see if other 3rd party charger will work at their place.
iPhone - Contact Support - Apple Support

My music will not play after it gets to a certain volume. It works fine if i turn it up loudly however when i turn it down past a point it will not work and the music wont play.

My music will not play after it gets to a certain volume. It works fine if i turn it up loudly however when i turn it down past a point it will not work and the music wont play.

If in settings, music, volume limit is off then restart your phone first. Hold the home and off button down until the apple symbol comes up.

I have a MB Pro that is running Lion; I also have two external DVI monitors and a DVI splitter in hopes that I could run the two monitors with my MB Pro. This actually works fine, but I am unable to "extend" the desktop. Any insights?

I have a MB Pro that is running Lion; I also have two external DVI monitors and a DVI splitter in hopes that I could run the two monitors with my MB Pro. This actually works fine, but I am unable to "extend" the desktop. Any insights?

You cannot have a extended desktop using a splitter. All that does is mirror the pair attached to the splitter.
You can do this however using a Matrox DualHead2Go.
Other solution would be to attach one monitor to your video out as you do the splitter and attach the other via USB (assuming the adapter supports the monitor's resolution).
Newer Technology USB to DVI / HDMI / VGA HD Video Display Adapter

Firewire not detected by FCP with OS-X 10.4.10 (Tiger), worked fine w 10.3.

Similar Messages

Maybe you are looking for