Firewire Output with TC to Tape Options?
Hello,
I am outputting a show for cable broadcast on Discovery Science and want to know what my options are for decks that I can output the show with sequence timecode to via Firewire 400 or 800. So far, my understanding is that this is not possible with DigiBeta, but is with DVCPro50 or DVCProHD. Are there better options? Thanks.
Jonathan
Dual 1 GHz G4 Mirrored Drive Door 2 GB DDR SDRAM Mac OS X (10.3.9) FCP 4.5
What is Discovery Sciences delivery requirements? No doubt Digibeta. So giving them a DVCAM tape isn't the answer. You are going to need to get a capture card, color correction monitor (they WILL kick it back if it isn't properly color corrected) and rent a digibeta deck.
The thing is, you need the additional equipment...especially if you are going to broadcast. Sure you could output to DVCAM tape (after you properly format the show) with arbituary TC and tell the dub house that you need the Bars & Tone to start at 58:30:00 when you dub to digibeta, but then you are trusting that they will do this.
Wait...what format did you shoot and edit? And does Discovery Science require the odd formatting of 15-45 pads of black after each act so that your Act Break starts on the 00 frame? (I edit for Discovery Channel and National Geographic all the time)
Shane
Similar Messages
-
FCP Problem with Firewire output to external monitor and speaker ???Help
i have a g5 powermac. the problem is when using Final cut pro 4hd. when i output my work through firewire to my external monitor and speaker i have a problem with the audio signal. Theres feedback/noise/hiss from the speakers. The firewire connects to DSR-11 vtr deck which feeds my monitor and speakers. it only happens when in FCP is set to A/V firewire output. does not happen if Video output is not set to firewire.
I Diagnosis is that it is not my dsr-11 deck or firewire i've ruled those out. The problem is either FCP software or Hardware problem with my G5
Does anyone have a similar problem. please respone, i will try to answer any respones,
Thanks
powermac g5 powermacCaptM
From the firewire that feeds the dsr-11. on the output, i use s-video cable to my monitor (sony pvm-14l) and High Quality rca cables thet feed the audio to the Roland Speakers.
I've changed all wires and still have audio problem. I,ve changed my Dsr-11 deck to my camcorder and still have the problem.
If any of u guys use FCP The problem happens When I select view> external Monitor > and select firewire for Audio/ and video. I have never changed my editing habits, something just went wrong with the signal, I think its a Hardware problem with the firewire connection. I'm Going to have to bring this to a Apple Service Center In my local area one day. -
I am buying an audio interface with Firewire output, would I feed this into Firewire,USB or Thunderbolt for Garageband?
I don't have a H4 but do have a H2. Did you set the H4 as a audio interface, after you plug it in choose interface in the H4 screen?
Did you choose the H4 input channel in the track info? -
Firewire failure when printing to tape with DSR-11
I have a problem printing to tape with bigger projects. I can't put out to tape more then around 20mins, then the either sound or sound and picture drop.
I have everything rendered and exported to a new, not-selfstanding final cut pro file (Quicktime export) and reimported and put in a new sequence. As I found out, this causes the least problems with complex sequences, sounds etc.
The problem might be related to a occasional image drop out while working on the timeline and watching on the external monitor (through firwire). After a while the connection fails and I have to switch from "all frames" to "none" and back in order to continue watching through the deck.
I checked all settings I know, could it be a hardware problem or a problem with the protocoll of the sony DSR-11 deck (I use DVCAM).
Thanks for your time !
klausHello Klaus,
I also own and operate a Sony DSR-11 which has worked out just fine for me. However, I recently bought a new firewire cable to replace my 4-year old cable and discovered that you get what you pay for when it comes to cables. After a while the new cable would slip out of the back of the DSR-11 and I would lose my connection during editing and playback. As part of the troubleshooting process I replaced the firewire cable with a "better" one and no longer experience this problem. My only critisism of the DSR-11 is the smaller firewire connection instead of the larger one found on external firewire devices. Good luck.
Steve -
Any news on Firewire/DV output with MPE on?
I understand this issue - not being able to preview over a firewire stream while MPE is on - has been reported, perhaps going back over a year. Is there any fix, other than turning off the MPE?
Nope.
Firewire output of Hardware MPE - I give up
http://forums.adobe.com/thread/840033?tstart=0 -
I have a Z1 camera connected via Firewire, and am trying to Print to Video a 1080i50 sequence. The inputs on the camera are set correctly. I have successfully printed to video many times in DV format - this is the first time I have attempted to output in HDV. I am using FCP v6.0.6.
In the A/V devices tab of Audio/Video Settings, in the Video Output list, I am only given the option of None, or Digital Cinema Desktop. All the flavors of HDV are listed, but are greyed out. Also, if I uncheck Different Output for Print-to-Video, it resets itself to checked the next time I look. I cannot set the View/External Video to All Frames - it remains set at Off no matter what I do. I suspect that here is the root of the problem - the video is not getting out of the computer to the recording deck.
I have only one external drive containing the sequence footage connected to the computer - I have previously experienced problems when multiple drives were connected.
Does anyone know where I may be going wrong?Jim: Sony HDV 1080i50 is set as the device control, although I don't think device control is used when printing to video. The recorder is started manually.
Thrillcat: The settings are correct on the camera for HDV when trying to record an HDV sequence, and yes, the sequence is HDV. I can successfully connect my DSR-11 DV-only deck and record to it from FCP, even recording a DV output directly from the HDV sequence.
Sharon: I'm checking the A/V devices settings right before I go. The problem seems to be that although FCP is acknowledging there is an HDV device connected, it is not letting me connect to any of them (the list of HDV device options is greyed out). Consequently all subsequent actions will not work (like selecting All Frames in the View menu). I need to find out why that list is greyed out.
If I check Different Output for Edit-to-Tape/Print-to-Video, the list of HDV devices is available, but I get a warning asking me to check external connections to the device, (as this output does not go to the Firewire output and I have no alternative video card installed). If I try to proceed further, I get a warning that "The sequence is not compatible with HDV Print to Video". However, the sequence is a correct 1080i50 sequence. -
Windows 7 Firewire Issues with CS5 and ADVC-700
I've got a Windows 7, 64 bit system with CS 5. In dubbing out for playback, I route a firewire cable from the PC to an Canopus/Grass Valley ADVC-700. Both units are less than a year old and are having issues with "black outs" during the dub out process. I've read different things about Windows 7 having issues with firewire drivers. After speaking to someone with Adobe, I've changed my firewire driver to Legacy. That hasn't helped.
The ADVC-700 has s-video out running to preview monitor and BNC out/XLR audio running to my playback system for ingest. When the video goes to black (usually for a 1/2 second), the audio drops out with it.
I've reset the settings on the ADVC-700 with no luck.
Any suggestions on a fix or something else to try?I did test with a JVC GY-HD200U and there weren't any performance issues which led me back to the PC or other on the PC.
The system is running Windows 7, 64 bit with CS5 Production Premium following an upgrade from the CS4 version.
I've got 12 GB of Ram, (2) Intel Xeon Quad Core E5560 -2.8 GHZ processoCrs.
(1) 500GB SATA2 hard drive, 7200 RPM, 32 MC (System Drive)
(3) 1 TB SATA2 Hard drives, 7200 RPM, 32 MC (3 TB, RAID0 Storage Drive)
Nvidia GeForce 9800GT graphics Card
Supermicro X8DAi motherboard, Intel 5520 Chipset, 2-PCIe X16, 1 PCIe x4, 3-PCI, 10-USB2 ports, 2-pro/1000 NIC, 8-channel HD audio, 6 SATA ports, RAID 0/1/5/10
I've got the legacy drivers for the firewire card. I've checked to make sure all of the power save options are off along with all screen saver options. I've cleaned my Adobe Cache out, deleted my Adobe Preferences, went from the 4pin/6pin cable to a 6pin/6pin cable to feed the ADVC-700 from the PC, reset the ADVC 700 back to factory specs...all of this with no luck.
The problem seems to be worse since the move from CS4 to CS5 but it's hard to tell.
I've also hooked up an older ADVC-500 unit with the same output results.
I think I noted in the first post that this is happening on two indentical systems with the same cabling and programs and the same ADVC-700 boxes.
I've been told by Adobe to clean my C; drive and reload the OS and Adobe CS5 as I should have done that when I upgraded instead of just upgrading the system from CS4 to CS5 using the discs. I haven't done this yet as I have to budget time/workflow to accomodate. -
Error Deploying A Cube with the Deploy All option
Hi All,
I get the error below when I try to deploy a cube:
ORA-06510: PL/SQL: unhandled user-defined exception
ORA-06512: at "OLAPSYS.CWM2_OLAP_UTILITY", line 1660
ORA-01403: no data found
ORA-06512: at "OLAPSYS.CWM2_OLAP_CUBE", line 33
ORA-06512: at "OLAPSYS.CWM2_OLAP_CUBE", line 55
ORA-06512: at "OLAPSYS.CWM2_OLAP_CUBE", line 386
ORA-06512: at line 10
I have already deployed all the dimensions with the "Deploy All" Option and the cube deployment still failed. Please, can anyone suggest possible ways of solving this problem?
Many thanksHi
Have you deployed your implementing cube/fact table?
Otherwise take the generated SQL script and try running it in SQLPlus before doing so so the following;
set serveroutput on size 999999
exec cwm_olap_manager.set_echo_on
now run the script, you should see errors output now.
Cheers
David -
Firewire Output for Video Preview Intermittent
I'm experiencing a frustrating problem with After Effects these days.
We're producing some video to be projected, so to see what the final output will really look like, I'm doing video previews using FireWire so output goes directly to the projector.
It's been working great up until yesterday. Was working fine until I had to restart my Mac. Upon reboot, my the projector no longer gets any video output.
I've tried restarting numerous times, checked all connections, etc. Got it working again after several restarts, but after switching over to Photoshop momentarily, the video output once again disappeared.
Any suggestions on how to regain consistent Firewire output for Video Previews?
My setup:
After Effects CS6
Mac Pro
OSX Version 10.7.5
Firewire Output of my Mac's monitor is going to the Firewire Input on my Sony Media Converter
RCA Video out (Composite video) going to the projector's video input.
After Effects Video Preview preferences:
Output Device: FireWire
Output Mode: Apple FireWire NTSCThanks for your reply, Rick.
I finally figured it out... I had a background application running called iCam that monitors my security cameras. I had forgotten that it uses Firewire and was intermittently hogging the resources. Once I quit that application, everything was good once again.
Thanks for taking the time to respond, much appreciated!
Mike -
Somebody once asked how to create PDF output with javadoc, so here's some work in progress:
I am currently creating a PDF doclet which creates directly PDF output from javadoc. It's still in alpha stage, because it does not yet create an index or navigation frame (which is mandatory for the PDF to be useful), and most HTML tags are not yet interpreted. But that's gonna improve over the next few weeks.
http://sourceforge.net/projects/pdfdoclet
Bye,
MarcelHai Marcel,
How to run this pdfdoclet?
I tried like:
javadoc -doclet com.tarsec.javadoc.pdfdoclet.PDFDoclet -docletpath d:\For_PDF_Doc\itext-0.92.jar;d:\For_PDF_Doc\pdfdoclet.jar *.java
And the result is:
Loading source file Test.java...
Constructing Javadoc information...
pdfdoclet: >> OPTION 0: -doclet
pdfdoclet: >> OPTION 1: -docletpath
pdfdoclet: Content completed, create index
pdfdoclet: *** PDF DOCUMENT api.pdf COMPLETED ***
Nothing is there in api.pdf!
anu -
How to replace a "notfound" output with a null value?
hi,
I'm just getting a output of "Rows Notfound" for a script..
instead of this , i just need to show the output with a record as null value or some value..
do we have any option to use this in oracle..Apart from capturing with an exception in PL/SQL code, if you're wanting something in a script as pure SQL, you'd have to generate an additional row and only select that where no data is found e.g...
SQL> ed
Wrote file afiedt.buf
1 select ename from emp where ename = 'FRED'
2 union all
3* select 'No Data' from dual where not exists (select * from emp where ename = 'FRED')
SQL> /
ENAME
No Data
SQL>Of course this does effectively double-up on the queries being executed, so if you're dealing with a heavily complex query, it may be best just just have the regular exception come out, but then this will also depend on your actual requirements and why you want to do this in the first place. -
Can't Drag and Drop with a Double Tap using Single Finger in Lion?
I installed the Mac OS X Lion two days. But I can't drag and drop with a Double tap using Single Finger, which I used to do in Snow Leopard.
If I choose Three Finger Move, then Swap Between Pages goes back to "Scroll left or right with Two Fingers" that only works with Safari, but doesn't work with Chrome or Firefox.
I tried literally every setting in Trackpad and also checked if there was a override settings and there is no overrride setting.
Would be thankful, if you guys could suggest me what to do?
======================================
My Machine Configuration:
Macbook Pro 13" (mid 2010)
Intel Core 2 Duo 2.4GHz
4GB Ram
Nvidia Geforce 320m
Mac OS X Lion (Installe on a updated Snow Leopard 10.6.8)Hey Serge many thanks for telling me how to do. now its working like previously
I just cheked the Dragging under Trackpad option and unchecked Three Finger Moves. now I can drag and drop with a double tap using single finger.
Thank you guys. You are the best -
Using Firewire devices with your MacBook
My wife recently purchased a new MacBook and decided that she wanted to try editing video from our camcorder. We have a Sony DCR-HC26 with firewire and USB 2.0 ports. If necessary, we can use the software provided by Sony and the USB port to import the video but Sony says that the video quality is much better using the firewire port. Unfortunately, Apple chose not to provide a firewire port on the new MacBook and there are no ports for installing a card. Is anyone aware of options available to use firewire devices with your MacBook? It seems as though this would be a common problem given the number of legacy firewire devices out there. I researched adapters but the only one I found is currently only supported by Windows XP and that doesn't do us any good. Thanks for the help.
The current white Macbook and the Macbook Pro has Firewire.
http://www.apple.com/macbook/white/
http://www.apple.com/macbookpro/
There are no USB to Firewire adapters. (Desperate aluminum Macbook owners are looking, but it can't be done.) Firewire MUST be in the computer. -
Firewire output volume to Onyx board
I can't find a way to reduce the Macbook firewire output to the input on my Mackie. Neither device seems to have an adjustment and the firewire output is ten times hotter than the analogue inputs on the board.
Other than turning down the volume in each individual app, any ideas?
Thanks!Welcome to the Apple discussions.
Sometimes the volume setting gets jumbled, and resetting the PRAM will fix it. Follow these steps:
1. Shut down the computer.
2. Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
3. Turn on the computer.
4. Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
5. Hold the keys down until the computer restarts and you hear the startup sound for the second time.
6. Release the keys. -
How to get ALV Output with selected Layout
I have a program which displays the output in ALV list format and i changed the layout and saved
In the selection-screen i have a field to select the layout after selecting the layout it output is not coming with that layout
can anyone tell me what is the problem
or give me a sample code
Thank youHi,
Check this code.
Hope it helps.
*& Report zSALES_ORDER
report z_sales_order.
type-pools: slis.
*DATA DECLARATION.
types: begin of i_vbak,
vbeln type vbeln_va,
augru type augru,
erdat type erdat,
end of i_vbak.
types: begin of i_vbap,
vbeln type vbeln_va,
augru type augru,
posnr type posnr_va,
matnr type matnr,
zmeng type dzmeng,
end of i_vbap.
types: begin of i_makt,
matnr type matnr,
maktx type maktx,
end of i_makt.
types: begin of i_lips,
posnr type posnr_vl,
matnr type matnr,
lfimg type lfimg,
end of i_lips.
types: begin of i_reason,
spras type spras,
augru type augru,
bezei type bezei40,
end of i_reason.
types: begin of i_vbpa,
vbeln type vbeln,
parvw type parvw,
kunnr type kunnr,
end of i_vbpa.
types: begin of i_kna1,
kunnr type kunnr,
name1 type name1_gp,
end of i_kna1.
types: begin of i_final,
vbeln type vbeln_va,
posnr type posnr_va,
matnr type matnr,
zmeng type dzmeng,
maktx type maktx,
lfimg type lfimg,
spras type spras,
augru type augru,
bezei type bezei40,
parvw type parvw,
kunnr type kunnr,
name1 type name1_gp,
end of i_final.
*INTERNAL TABLES
data: it_vbak type standard table of i_vbak.
data: it_vbap type standard table of i_vbap.
data: it_makt type standard table of i_makt.
data: it_lips type standard table of i_lips.
data: it_vbpa type standard table of i_vbpa.
data: it_kna1 type standard table of i_kna1.
data: it_final type standard table of i_final.
data: it_reason type standard table of i_reason.
data : v_flag.
*WORK AREA
data: wa_vbak type i_vbak.
data: wa_vbap type i_vbap.
data: wa_makt type i_makt.
data: wa_lips type i_lips.
data: wa_vbpa type i_vbpa.
data: wa_kna1 type i_kna1.
data: wa_final type i_final.
data: wa_reason type i_reason.
*DATA DECLARATION.
data: v_progname type sy-repid.
data: v_vbeln type vbak-vbeln.
data: v_gridtitle type lvc_title.
*PARAMETERS: D_VARI LIKE DISVARIANT-VARIANT.
data: i_variant like disvariant.
data: p_vari like disvariant-variant.
*DATA DECLARATION FOR CATALOGS LAYOUT SORT EVENTCATALOG TOPOFPAGE.
data: i_fieldcat type slis_t_fieldcat_alv.
data: i_layout type slis_layout_alv.
data: i_sortinfo type slis_t_sortinfo_alv.
data: i_listheader type slis_t_listheader.
data: i_eventcat type slis_t_event.
*INITIALIZATION - First point of execution of program
To initialize Any variables that are to be
used in the program, even before selection screen
appears.
initialization.
v_progname = sy-repid.
v_flag = space.
perform z_default_variant.
*SELECTION SCREEN
selection-screen begin of block blk1 with frame title text-002.
select-options: s_vbeln for v_vbeln.
selection-screen end of block blk1.
*Variable for ALV Variant
selection-screen begin of block b_var with frame title text-020.
parameters: d_vari like disvariant-variant.
selection-screen end of block b_var.
*AT SLECTION-SCREEN.
at selection-screen.
perform z_validations.
*AT SELECTION SCREEN.
at selection-screen on d_vari.
CHECK FOR THE EXISTENCE OF THE VARIANT SELECTED
perform zf_check_var_exist.
at selection-screen on value-request for d_vari.
PROVIDE THE F4-HELP.
perform zf_variant_f4.
*START OF SELECTION.
start-of-selection.
perform z_select.
perform check_validation_flag.
perform z_fieldcat using i_fieldcat.
perform z_layout.
perform z_sortinfo using i_sortinfo.
perform z_eventcat using i_eventcat.
perform z_gridtitle.
perform z_listheader using i_listheader.
perform z_display.
*& Form Z_VALIDATIONS
text
--> p1 text
<-- p2 text
form z_validations .
select vbeln into v_vbeln
up to 1 rows
from vbak
where vbeln in s_vbeln.
endselect.
if sy-subrc <> 0.
message i002(sy) with 'No Records'.
v_flag = 'X'.
endif.
endform. " Z_VALIDATIONS
*& Form Z_FIELDCAT
text
-->P_I_FIELDCAT text
form z_fieldcat using p_i_fieldcat type slis_t_fieldcat_alv.
data: i_fieldcat type slis_fieldcat_alv.
*VBAK-VELN
i_fieldcat-col_pos = '1'. " POSITION OF THE COLUMN.
i_fieldcat-fieldname = 'VBELN'. " FIELD FOR WHICH CATALOG ID FILLED.
i_fieldcat-tabname = 'IT_FINAL'. " INTERNAL TABLE TO WHICH THE FIELD BELONGS TO.
i_fieldcat-key = 'X'. " SO THAT THIS FIELD IS NOT SCROLLABLE AND HIDDABLE.
i_fieldcat-just = 'C'. " FOR JUSTIFICATION.
i_fieldcat-lzero = 'X'. " OUTPUT WITH LEADING ZEROS.
i_fieldcat-seltext_l = 'SALES ORDER'. " LONG TEXT FOR HEADER.
i_fieldcat-outputlen = 15. " SET THE OUTPUT LENGTH.
i_fieldcat-ref_tabname = 'VBAK'. " FOR F1 & F4 HELP AS REFERNCED TO THE DDIC TABLE.
append i_fieldcat to p_i_fieldcat.
*VBAP-SPRAS
i_fieldcat-col_pos = '2'. " POSITION OF THE COLUMN.
i_fieldcat-fieldname = 'SPRAS'. " FIELD FOR WHICH CATALOG ID FILLED.
i_fieldcat-tabname = 'IT_FINAL'. " INTERNAL TABLE TO WHICH THE FIELD BELONGS TO.
i_fieldcat-lzero = 'X'. " OUTPUT WITH LEADING ZEROS.
i_fieldcat-seltext_l = 'LANGUAGE'. " LONG TEXT FOR HEADER.
i_fieldcat-outputlen = 5. " SET THE OUTPUT LENGTH.
i_fieldcat-ref_tabname = 'TVAUT'. " FOR F1 & F4 HELP AS REFERNCED TO TABLE.
append i_fieldcat to p_i_fieldcat.
*VBAP-AUGRU
i_fieldcat-col_pos = '3'. " POSITION OF THE COLUMN.
i_fieldcat-fieldname = 'AUGRU'. " FIELD FOR WHICH CATALOG ID FILLED.
i_fieldcat-tabname = 'IT_FINAL'. " INTERNAL TABLE TO WHICH THE FIELD BELONGS TO.
i_fieldcat-lzero = 'X'. " OUTPUT WITH LEADING ZEROS.
i_fieldcat-seltext_l = 'REASON'. " LONG TEXT FOR HEADER.
i_fieldcat-outputlen = 5. " SET THE OUTPUT LENGTH.
i_fieldcat-ref_tabname = 'VBAK'. " FOR F1 & F4 HELP AS REFERNCED TO TABLE.
append i_fieldcat to p_i_fieldcat.
*VBAP-bezei
i_fieldcat-col_pos = '4'. " POSITION OF THE COLUMN.
i_fieldcat-fieldname = 'BEZEI'. " FIELD FOR WHICH CATALOG ID FILLED.
i_fieldcat-tabname = 'IT_FINAL'. " INTERNAL TABLE TO WHICH THE FIELD BELONGS TO.
i_fieldcat-lzero = 'X'. " OUTPUT WITH LEADING ZEROS.
i_fieldcat-seltext_l = 'DESCRIPTION'. " LONG TEXT FOR HEADER.
i_fieldcat-outputlen = 20. " SET THE OUTPUT LENGTH.
i_fieldcat-ref_tabname = 'TVAUT'. " FOR F1 & F4 HELP AS REFERNCED TO TABLE.
append i_fieldcat to p_i_fieldcat.
*VBAP-POSNR
i_fieldcat-col_pos = '5'. " POSITION OF THE COLUMN.
i_fieldcat-fieldname = 'POSNR'. " FIELD FOR WHICH CATALOG ID FILLED.
i_fieldcat-tabname = 'IT_FINAL'. " INTERNAL TABLE TO WHICH THE FIELD BELONGS TO.
i_fieldcat-lzero = 'X'. " OUTPUT WITH LEADING ZEROS.
i_fieldcat-seltext_l = 'ITEM'. " LONG TEXT FOR HEADER.
i_fieldcat-outputlen = 8. " SET THE OUTPUT LENGTH.
i_fieldcat-ref_tabname = 'VBAP'. " FOR F1 & F4 HELP AS REFERNCED TO TABLE.
append i_fieldcat to p_i_fieldcat.
*VBAP-MATNR.
i_fieldcat-col_pos = '6'. " POSITION OF THE COLUMN.
i_fieldcat-fieldname = 'MATNR'. " FIELD FOR WHICH CATALOG ID FILLED.
i_fieldcat-tabname = 'IT_FINAL'. " INTERNAL TABLE TO WHICH THE FIELD BELONGS TO.
i_fieldcat-lzero = 'X'. " OUTPUT WITH LEADING ZEROS.
i_fieldcat-seltext_l = 'MATERIAL'. " LONG TEXT FOR HEADER.
i_fieldcat-outputlen = 10. " SET THE OUTPUT LENGTH.
i_fieldcat-ref_tabname = 'VBAP'. " FOR F1 & F4 HELP AS REFERNCED TO TABLE.
append i_fieldcat to p_i_fieldcat.
*VBAP-ZMENG
i_fieldcat-col_pos = '7'. " POSITION OF THE COLUMN.
i_fieldcat-fieldname = 'ZMENG'. " FIELD FOR WHICH CATALOG ID FILLED.
i_fieldcat-tabname = 'IT_FINAL'. " INTERNAL TABLE TO WHICH THE FIELD BELONGS TO.
i_fieldcat-lzero = 'X'. " OUTPUT WITH LEADING ZEROS.
i_fieldcat-seltext_l = 'QUANT'. " LONG TEXT FOR HEADER.
i_fieldcat-outputlen = 10. " SET THE OUTPUT LENGTH.
i_fieldcat-ref_tabname = 'VBAP'. " FOR F1 & F4 HELP AS REFERNCED TO TABLE.
append i_fieldcat to p_i_fieldcat.
*MAKT-MAKTX
i_fieldcat-col_pos = '8'. " POSITION OF THE COLUMN.
i_fieldcat-fieldname = 'MAKTX'. " FIELD FOR WHICH CATALOG ID FILLED.
i_fieldcat-tabname = 'IT_FINAL'. " INTERNAL TABLE TO WHICH THE FIELD BELONGS TO.
i_fieldcat-lzero = 'X'. " OUTPUT WITH LEADING ZEROS.
i_fieldcat-seltext_l = 'DESCRIPTION'. " LONG TEXT FOR HEADER.
i_fieldcat-outputlen = 20. " SET THE OUTPUT LENGTH.
i_fieldcat-ref_tabname = 'MAKT'. " FOR F1 & F4 HELP AS REFERNCED TO TABLE.
append i_fieldcat to p_i_fieldcat.
*LIPS-VBELN
i_fieldcat-col_pos = '9'. " POSITION OF THE COLUMN.
i_fieldcat-fieldname = 'VBELN'. " FIELD FOR WHICH CATALOG ID FILLED.
i_fieldcat-tabname = 'IT_FINAL'. " INTERNAL TABLE TO WHICH THE FIELD BELONGS TO.
i_fieldcat-lzero = 'X'. " OUTPUT WITH LEADING ZEROS.
i_fieldcat-seltext_l = 'DELIVERY'. " LONG TEXT FOR HEADER.
i_fieldcat-outputlen = 15. " SET THE OUTPUT LENGTH.
i_fieldcat-ref_tabname = 'LIPS'. " FOR F1 & F4 HELP AS REFERNCED TO TABLE.
append i_fieldcat to p_i_fieldcat.
*LIPS-LFIMG
i_fieldcat-col_pos = '10'. " POSITION OF THE COLUMN.
i_fieldcat-fieldname = 'LFIMG'. " FIELD FOR WHICH CATALOG ID FILLED.
i_fieldcat-tabname = 'IT_FINAL'. " INTERNAL TABLE TO WHICH THE FIELD BELONGS TO.
i_fieldcat-lzero = 'X'. " OUTPUT WITH LEADING ZEROS.
i_fieldcat-do_sum = 'X'.
i_fieldcat-seltext_l = 'LFIMG'. " LONG TEXT FOR HEADER.
i_fieldcat-outputlen = 18. " SET THE OUTPUT LENGTH.
i_fieldcat-ref_tabname = 'LIPS'. " FOR F1 & F4 HELP AS REFERNCED TO TABLE.
append i_fieldcat to p_i_fieldcat.
*parvw
i_fieldcat-col_pos = '11'. " POSITION OF THE COLUMN.
i_fieldcat-fieldname = 'PARVW'. " FIELD FOR WHICH CATALOG ID FILLED.
i_fieldcat-tabname = 'IT_FINAL'. " INTERNAL TABLE TO WHICH THE FIELD BELONGS TO.
i_fieldcat-lzero = 'X'. " OUTPUT WITH LEADING ZEROS.
i_fieldcat-seltext_l = 'PARTNER FUN'. " LONG TEXT FOR HEADER.
i_fieldcat-outputlen = 18. " SET THE OUTPUT LENGTH.
i_fieldcat-ref_tabname = 'VBPA'. " FOR F1 & F4 HELP AS REFERNCED TO TABLE.
append i_fieldcat to p_i_fieldcat.
*KUNNR
i_fieldcat-col_pos = '12'. " POSITION OF THE COLUMN.
i_fieldcat-fieldname = 'KUNNR'. " FIELD FOR WHICH CATALOG ID FILLED.
i_fieldcat-tabname = 'IT_FINAL'. " INTERNAL TABLE TO WHICH THE FIELD BELONGS TO.
i_fieldcat-lzero = 'X'. " OUTPUT WITH LEADING ZEROS.
i_fieldcat-seltext_l = 'SHIP'. " LONG TEXT FOR HEADER.
i_fieldcat-outputlen = 18. " SET THE OUTPUT LENGTH.
i_fieldcat-ref_tabname = 'VBPA'. " FOR F1 & F4 HELP AS REFERNCED TO TABLE.
append i_fieldcat to p_i_fieldcat.
*NAME1
i_fieldcat-col_pos = '13'. " POSITION OF THE COLUMN.
i_fieldcat-fieldname = 'NAME1'. " FIELD FOR WHICH CATALOG ID FILLED.
i_fieldcat-tabname = 'IT_FINAL'. " INTERNAL TABLE TO WHICH THE FIELD BELONGS TO.
i_fieldcat-lzero = 'X'. " OUTPUT WITH LEADING ZEROS.
i_fieldcat-seltext_l = 'NAME'. " LONG TEXT FOR HEADER.
i_fieldcat-outputlen = 18. " SET THE OUTPUT LENGTH.
i_fieldcat-ref_tabname = 'KNA1'. " FOR F1 & F4 HELP AS REFERNCED TO TABLE.
append i_fieldcat to p_i_fieldcat.
endform. " Z_FIELDCAT
*& Form Z_SELECT
text
--> p1 text
<-- p2 text
form z_select .
select vbeln
augru erdat into corresponding fields of table it_vbak
from vbak
where vbeln in s_vbeln.
loop at it_vbak into wa_vbak.
wa_vbak-erdat = '99991231'.
modify it_vbak from wa_vbak transporting erdat.
endloop.
select * from vbak into corresponding fields of table it_vbak
for all entries in it_vbak
where erdat = it_vbak-erdat.
if sy-subrc = 0.
select vbeln
posnr
matnr
zmeng into corresponding fields of table it_vbap
from vbap
for all entries in it_vbak
where vbeln = it_vbak-vbeln.
if sy-subrc = 0.
select spras
augru
bezei into corresponding fields of table it_reason
from tvaut
for all entries in it_vbak
where augru = it_vbak-augru.
if sy-subrc = 0.
select vbeln
parvw
kunnr into corresponding fields of table it_vbpa
from vbpa
for all entries in it_vbak
where vbeln = it_vbak-vbeln.
if sy-subrc = 0.
select kunnr
name1 into corresponding fields of table it_kna1
from kna1
for all entries in it_vbpa
where kunnr = it_vbpa-kunnr.
if sy-subrc = 0.
select posnr
matnr
lfimg into corresponding fields of table it_lips
from lips
for all entries in it_vbap
where posnr = it_vbap-posnr.
if sy-subrc = 0.
select matnr
maktx into corresponding fields of table it_makt
from makt
for all entries in it_vbap
where matnr = it_vbap-matnr.
endif.
endif.
endif.
endif.
endif.
else.
message i002(sy) with 'No Data found'.
leave list-processing.
endif.
if sy-subrc = 0.
loop at it_vbap into wa_vbap.
read table it_vbak into wa_vbak with key vbeln = wa_vbap-vbeln binary search.
if sy-subrc = 0.
*MOVE DATA INTO IT_FINAL.
move: wa_vbak-vbeln to wa_final-vbeln,
wa_vbak-augru to wa_final-augru,
wa_vbap-posnr to wa_final-posnr,
wa_vbap-matnr to wa_final-matnr,
wa_vbap-zmeng to wa_final-zmeng.
endif.
read table it_lips into wa_lips with key posnr = wa_final-posnr binary search.
if sy-subrc = 0.
move: wa_lips-lfimg to wa_final-lfimg.
endif.
read table it_reason into wa_reason with key augru = wa_final-augru binary search.
if sy-subrc = 0.
move: wa_reason-spras to wa_final-spras,
wa_reason-bezei to wa_final-bezei.
endif.
read table it_makt into wa_makt with key matnr = wa_final-matnr binary search.
if sy-subrc = 0.
move: wa_makt-maktx to wa_final-maktx.
endif.
read table it_vbpa into wa_vbpa with key vbeln = wa_final-vbeln binary search.
if sy-subrc = 0.
move: wa_vbpa-parvw to wa_final-parvw,
wa_vbpa-kunnr to wa_final-kunnr.
endif.
read table it_kna1 into wa_kna1 with key kunnr = wa_final-kunnr binary search.
if sy-subrc = 0.
move: wa_kna1-name1 to wa_final-name1.
endif.
append wa_final to it_final.
clear wa_final.
endloop.
endif.
endform. " Z_SELECT
*& Form Z_LAYOUT
text
--> p1 text
<-- p2 text
form z_layout .
i_layout-zebra = 'X'.
i_layout-totals_text = 'Total'(a00).
i_layout-subtotals_text = 'SubTotal'(a01).
i_layout-box_tabname = 'IT_FINAL'.
endform. " Z_LAYOUT
*& Form Z_SORTINFO
text
-->P_I_SORTINFO text
form z_sortinfo using p_i_sortinfo type slis_t_sortinfo_alv.
data: i_sortinfo type slis_sortinfo_alv.
clear i_sortinfo.
i_sortinfo-spos = '1'.
i_sortinfo-fieldname = 'VBELN'.
i_sortinfo-tabname = 'IT_FINAL'.
i_sortinfo-up = 'X'.
i_sortinfo-group = 'UL'. " I.E UNDERLINE AFTER EVERY GROUP
i_sortinfo-subtot = 'X'.
append i_sortinfo to p_i_sortinfo.
endform. " Z_SORTINFO
*& Form Z_EVENTCAT
text
-->P_I_EVENTCAT text
form z_eventcat using p_i_eventcat type slis_t_event.
data: i_event type slis_alv_event.
call function 'REUSE_ALV_EVENTS_GET'
exporting
i_list_type = 0
importing
et_events = p_i_eventcat
exceptions
list_type_wrong = 1
others = 2.
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
clear i_event.
read table p_i_eventcat with key name = slis_ev_top_of_page into
i_event.
if sy-subrc = 0.
move 'TOP_OF_PAGE' to i_event-form.
append i_event to p_i_eventcat.
endif.
read table p_i_eventcat with key name = slis_ev_pf_status_set into i_event.
if sy-subrc = 0.
move 'SET_PF_STATUS' to i_event-form.
append i_event to p_i_eventcat.
endif.
clear i_event.
read table p_i_eventcat into i_event with key name = slis_ev_user_command .
if sy-subrc = 0.
move 'USER_COMMAND' to i_event-form.
append i_event to p_i_eventcat.
endif.
endform. " Z_EVENTCAT
*& Form Z_DISPLAY
text
--> p1 text
<-- p2 text
form z_display .
call function 'REUSE_ALV_GRID_DISPLAY'
exporting
i_callback_program = v_progname
i_callback_pf_status_set = 'SET_PF_STATUS'
i_callback_user_command = 'USER_COMMAND'
i_callback_top_of_page = 'TOP_OF_PAGE'
i_grid_title = v_gridtitle
i_save = 'A'
is_layout = i_layout
it_fieldcat = i_fieldcat[]
it_sort = i_sortinfo
it_events = i_eventcat
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
tables
t_outtab = it_final
exceptions
program_error = 1
others = 2
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
endform. " Z_DISPLAY
*& Form Z_GRIDTITLE
text
--> p1 text
<-- p2 text
form z_gridtitle .
v_gridtitle = 'ALV FOR SALES ORDER DISPLAY'.
endform. " Z_GRIDTITLE
*TOP OF PAGE.
form top_of_page.
call function 'REUSE_ALV_COMMENTARY_WRITE'
exporting
it_list_commentary = i_listheader.
endform. "TOP_OF_PAGE
*MENU SETTINGS.
form set_pf_status using rt_extab type slis_t_extab.
set pf-status 'ALV_MENU'.
endform. "SET_PF_STATUS
*USER-COMMAND
form user_command using p_ucomm type sy-ucomm
rs_selfield type slis_selfield.
data : vbeln type vbeln_va.
case p_ucomm.
when 'BACK'.
leave program.
when '&IC1'.
clear : vbeln.
vbeln = rs_selfield-value.
set parameter id: 'AUN' field vbeln.
call transaction 'VA03' and skip first screen.
endcase.
endform. " USER_COMMAND
*& Form Z_LISTHEADER
text
-->P_I_LISTHEADER text
form z_listheader using p_i_listheader type slis_t_listheader.
data: l_listheader type slis_listheader.
refresh p_i_listheader.
clear l_listheader.
l_listheader-typ = 'H'.
l_listheader-info = text-001.
append l_listheader to p_i_listheader.
clear l_listheader.
l_listheader-typ = 'H'.
l_listheader-info = text-002.
append l_listheader to p_i_listheader.
endform. " Z_LISTHEADER
*& Form check_validation_flag
text
--> p1 text
<-- p2 text
form check_validation_flag .
if not v_flag is initial.
leave list-processing.
endif.
endform. " check_validation_flag
*& Form Z_DEFAULT_VARIANT
text
--> p1 text
<-- p2 text
form z_default_variant .
i_variant-report = v_progname.
call function 'REUSE_ALV_VARIANT_DEFAULT_GET'
exporting
i_save = 'A'
changing
cs_variant = i_variant
exceptions
wrong_input = 1
not_found = 2
program_error = 3
others = 4.
if sy-subrc = 0.
p_vari = i_variant-variant.
D_VARI = P_VARI.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
endform. " Z_DEFAULT_VARIANT
*& Form ZF_CHECK_VAR_EXIST
text
--> p1 text
<-- p2 text
form zf_check_var_exist .
data: l_variant like disvariant.
if not p_vari is initial.
clear l_variant.
l_variant-report = v_progname.
l_variant-variant = p_vari.
call function 'REUSE_ALV_VARIANT_EXISTENCE'
exporting
i_save = 'U'
changing
cs_variant = l_variant
exceptions
wrong_input = 1
not_found = 2
program_error = 3
others = 4.
if sy-subrc = 0.
clear i_variant.
move: l_variant-variant to i_variant-variant,
l_variant-report to i_variant-report.
else.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
endif.
endform. " ZF_CHECK_VAR_EXIST
*& Form ZF_VARIANT_F4
text
--> p1 text
<-- p2 text
form zf_variant_f4 .
data: x_variant like disvariant.
call function 'REUSE_ALV_VARIANT_F4'
exporting
is_variant = i_variant
I_TABNAME_HEADER =
I_TABNAME_ITEM =
IT_DEFAULT_FIELDCAT =
i_save = 'U'
i_display_via_grid = 'X'
importing
E_EXIT =
es_variant = x_variant
exceptions
not_found = 1
program_error = 2
others = 3
if sy-subrc = 0.
p_vari = x_variant-variant.
d_vari = p_vari.
clear i_variant.
move: x_variant-variant to i_variant-variant,
x_variant-report to i_variant-report.
else.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
endform. " ZF_VARIANT_F4
Regards,
Pritha.
Maybe you are looking for
-
How do i pass selected value of JList in one frame to other frame?
hai everybody, In my application where i m using swing as GUI in that i require selected value of Jlist in one frame to other frame .. Since i need the previous frame jlist selected value for my application. How this can be done Help me pa Thanx in a
-
Multiple report footers at bottom of report
Hi, I have a report which has multiple report footer sections, all of which I want to appear at the bottom of the page. When I use the print on bottom of page option in the section expert (for each section), it puts each section on its own page (whic
-
Hi All, Can anyone provide me with the standard Function Modules for FPE1 and FP08 Transaction code respectively. Actually I need to create a payment request based on the user requirement and cancel/delete the same payment request if he/she wants t
-
I know this is possible, I just don't know how to do it. All I want is to be able to set up my Dreamweaver on my laptop (PC - Windows XP Home Edition) so that I can design and test a coldfusion website, complete with DB conectivity (access for now).
-
I have photoshop CS 5 I have B&W image that I want to make a brownish sepia, in past I could
I want to use my CS 5 with my B&W image to add color to image to make a good brownish sepia,to print. I have these images in this format, but I have a new image I want to do this when I bring up my color tools they go grey. So just to check, I bring