Firewire port not recognized after 10.7.5 update??

I updated yesterday to OS X Lion 10.7.5 and now my MacBook Pro says my firewire port is not recognized…any ideas??

Wow, no help at all. Thanks, Apple!! Another stellar performance. That's the last time I ever install an update as it comes up.

Similar Messages

Logitech trackball not recognized after 10.5.8 update- LCC 3.1 needed

Logitech Trackman wireless trackball was not recognized after 10.5.8 upgrade. At re-boot, the "searching for bluetooth mouse" screen appeared, pushing the re-set button on the wireless base and trackball did not solve the problem.
Had to plug in my Apple mouse (worked immediately), go to the Logitech website and download the latest Logitech Control Center software for Snow Leopard, dated 9/22/09 (version 3.1)
After install and re-start, Logitech hardware worked perfectly, as before.
Not sure if it would avoid this issue, but I recommend installing LCC 3.1 before you install the 10.5.8 update. That or be sure you have an Apple mouse on hand.

aaron08544 wrote:
Turns out the 10.5.8 update is missing a very important file which is
/usr/X11/lib/X11/fonts/misc/fonts.alias
After I copied one from my Centos 5.2 box, things are finally back to normal.
-Aaron
I have that file on my system and x11 was updated using 10.5.8 combo update. it works just fine.

Now, USB External Hard Drive Not Recognized after 10.6.8 Update

My external Hard Drive is not recognized on start up. I have to unplug it and plug it back in for it to be recognized.
All this since 10.6.8 updated today.
I'm a fool for updating the same day.
This has happened before and I always forget the bugs in the software when it first comes out.

Alright, I'm gonna go ahead and close this thread. I found out the solution to my issue. Turns out it was a problem with a system file I changed right before installing. The error only occurred on a restart... the required 10.6.1 reboot was the first reboot since the change, so thus it looked like the culprit.
If you want a more thorough explanation of my problem (highly HIGHLY doubt it's gonna help you guys out), check this thread --> http://forums.appleinsider.com/showpost.php?p=1480362&postcount=8
Sorry for the trouble!

USB/ Firewire Ports not recognized...

My iMac will not recognize my iPod, printer, camera, or anything that is plugged into it. What could be the problem? Thank you so much for your help!!!

Kristi,
Please tell us what iMac model you have. I think the problem you have on this thread:
http://discussions.apple.com/message.jspa?messageID=3021123#3021123
Is related to the one you have here. Here is how to identify iMacs:
http://docs.info.apple.com/article.html?artnum=301724 - G5 & Intel Core Duo (look identical on the outside except when you About This Mac on the Apple menu).
http://docs.info.apple.com/article.html?artnum=301724 - G4 (Dome with flat panel on articulating arm)
http://docs.info.apple.com/article.html?artnum=58669 - G3 (CRT)
If indeed your Mac is not an Intel Core Duo, in the future find the correct iMac forum to post your questions once we resolve this problem. I understand how each of these iMacs work, but I may not be in this forum all the time.
http://discussions.apple.com/category.jspa?categoryID=189 - iMac Intel Core Duo forum
http://discussions.apple.com/category.jspa?categoryID=134 -
iMac G5 forum
http://discussions.apple.com/category.jspa?categoryID=137 - iMac G4 forum (Flat Panel)
http://discussions.apple.com/category.jspa?categoryID=133 -
iMac G3 forum (CRT)

Firewire port not recognized on new MacBook Pro

I've been using time machine to backup my computer to a LaCie external drive and noticed that it hasn't done it for over two weeks. I can hear the drive when it's connected but it doesn't show up on my desktop. I plugged it into my old macbook and it worked fine. I'm using a new adapter made for this model of macbook pro — a firewire 800.
I need to use this computer for work and am hoping there is an upgrade that might fix it. I can't afford the time it will take at a mac store to fix this. Any advice?
thanks so much

dose the hard drive show up in system profiler or disk utility?
(apple menu, about this mac, more info button, USB from the left hand list.)
(dock, finder, menu bar, go menu, utilities, disk utilities)

Macbook Pro HD died/not recognized after latest Java & airport update..

Hi,
After the latest Java & airport updates, my mbp won't startup.
The only thing i see after the chime is the questionmark folder.
Holding the option button during restart to choose the bootdisk doesn't show the harddisk.
I've resetted pram & smc and that also doesn't fix it.
The mbp was connected to the charger and the battery almost full.
Hope somebody can help me, have been searching but didn't found no answers.
Did found somebody on the forum with a similair/the same problem
12-4 by JerryN
[quote]I'm having an even worse problem. After the update, my Macbook Pro won't start up at all. It makes the start up tones, but the screen stays black.
Anyone else having this problem?[quote]
have replied to him.. let's see if/hope he got a fix
thanks in advance
Message was edited by: KoenL

Antonio, I'm going to try the instal disk tomorrow(it's almost 02:00 over here, and i'm at my girls house). If the harddisk is recognized, i will try the hardware check and see what's wrong.
Firewire mode is still working, so maybe with a little luck i can access it from my PowerMac. Did this before on my old Powerbook 12inch, when it gave up working properly.
Can you believe this.. Because i needed all the space of my external hd, i copied all my music to my mbp's hd tonight.. didn't expect this to happen.
Before i went to my girls house i was thinking about putting it all back, but couldn't wait..
I don't think apple is going to replace my hd on warranty, it's more than 2 years old.
My mbp has served well and i'm waiting for the arrendale 15 mbp's, when they arrive i'll order one and will swap the harddisk for a ssd. Then i can put the hd in my santa rosa mbp.
But if you think i can try asking apple for a replacement harddisk, i will try..

Thunderbolt Display USB ports not working after 1.2 firmware update

I installed the Thunderbolt Display Firmware Update 1.2 a few days back, and following that update, the USB ports on my display have stopped working completely. The display's Thunderbolt port and Ethernet jacks are working fine, as is the Thunderbolt/power cable connection to my MacBook Air (mid-2011, 11 inch, running OS X Yosemite 10.10.1). Any ideas on a fix?

Do an SMC and PRAM reset.

Firewire ports not responding to external drives.

I have a LaCie 250 gig and it was working fine until I plugged a power book into one of the firewire ports. Not only did my G4 not recognize the power book, it also stopped recognizing my external drive.
The .mac site said to unplug everything and restart the computer to reset the firewire ports. Which I did and nothing changed. Figured it was a lost cause so I used the USB instead.
Then, one day, I tried it again to see what would happen and it worked. The firewire went back to normal and everything was fine.
The other day, I plugged my Canon XL2 into the firewire port and it shut everything down again. So, now I'm without firewire and back to USB for my external drive.
The firewire DOES turn on the drive, it just doesn't recognize that there's anything plugged in.
Thoughts?

1. Shut-down your Mac, and unplug the power cord
2. Turn the power off on your external FireWire devices
3. Unplug the FireWire devices from the Mac
4. Wait for 5 min.
5. Plug the power cord to your Mac only
6. For PPC Macs: Restart the Mac while holding the Option-Apple-O-F, and keep holding until you get the ">" prompt, then release the keys
7. At the ">" prompt type:
      reset-nvram and hit the Return key
      set-defaults and hit the Return key
      reset-all and hit the Return key
the last command will restart your mac
8. Shut down your Mac
9. Connect all your FireWire devices to the Mac and turn them on
10. Restart your Mac.
All your FireWire devices should reapear, if not repeat the procedure
How to avoid the issue :
The only really proven way to avoid burning up a FireWire port is to connect all devices and to turn them on PRIOR turning on the Mac. Likely, one must unplug them and turn them off AFTER the Mac has been turned off. If you need to connect another device, then you're on for a shutdown of your machine...  It's a tad annoying but it guarantees that the FW ports won't be damaged.  Be careful when using self powered devices such as webcams, iPods, hard drives or hubs, as they can destroy the port pretty easily. Another thing is to avoid daisy-chaining hard drives.
When the FW port doesn't respond anymore :
In this case, peripherals won't be mounted upon plugging, and won't be displayed in Apple's System Profiler. The self powered devices will still be fed by the port, but won't respond either.  It happens that the PHY just hangs after a surge or a random problem. Once hung, the port will not respond any longer, it is possible to reset the component by going through the following steps :
1° boot the PPC mac in Open Firmware by holding [ Apple key - Option - O - F ] after the startup chime.  2° you'll get to a command prompt. the keyboard mapping will be QWERTY, so pay attention when you type the following :  RESET-NVRAM (enter)  RESET-ALL (enter)  3° Now the mac should restart itself and the port should function properly again.  If it still doesn't work, then it means that the PHY is damaged.
http://www.hardmac.com/articles/16/
From Kappy post:
922 is only used in dual drive cases to provide a "build-in firmware RAID support"
912 or 912+ is FW800, the "+" means USB2
911 is FW400
924 adds eSATA support along with FW400/800
MacSales, OWC Tech Support library is where I would go first, as they do tend to have or links to, firmware updates for Oxford.
From Wiebetech:
I just upgraded my Mac OS, and now I'm having trouble with my FireWire device. What can I do?
A: With nearly every OS update Apple releases, some external drives are not recognized after the update. The typical symptom is that the device will not mount but the volume is visible and grayed out in Disk Utility. This means that the device is working properly, but the OS does not recognize the volume as mountable. Sometimes the drive does not show up at all.
The first thing to do is to see if repairing Permissions with Apple's Disk Utility First Aid feature solves the problem. If not, try repairing the disk with First Aid. Another possible solution is to zap the PRAM. This is done with a keyboard command while rebooting. Restart your computer and hold down the Command, Option, P and R keys. Consult the Apple web site for details.
If this does not work, then try pushing the PMMU reset button on the logic board. Consult the Apple web site for locations of the button for your Mac. If the drive still does not show up, shut down, disconnect all peripheral devices, and boot from the Mac OS Installation CD. The later the OS version, the better. Do not reinstall the OS, but when the Installer is loaded up and ready to begin, go to the File menu and use the Disk Utility program. Connect the drive that is having problems, then start the Disk Utility application. If you see the external drive and it is not grayed out, you know the drive is okay. Run Disk First Aid on it anyway. Then run it on your internal boot drive while you are at it. When done, unmount the external drive and UNPLUG it! Then restart the Mac.
When the Mac has restarted and is running on the internal boot drive, reconnect the external drive.

Firewire does not function after uninstalling macfuse and an out of date version of NTFS32 and then installed latest version of Tuxera NTFS for Mac.

I purchased a 3TB HDD (WD USB 3.0 $100) to replace the 2TB Seagate for a new Time Machine HDD. The 2B was full and backups were deleting older files. The 3TB was formatted NTFS and I want to "recover" the included SW before I reformatted the HDD for the iMac. I discovered that MacFuse was out of date and unsupported and my NTFS-32 was also out of date so I uninstalled both and then installed the most recent version of Tuxera NTFS for Mac. I rebooted and discovered that the FW800 port was unresponsive. Below is the EtreCheck report:
Problem description:
Firewire does not function after uninstalling macfuse and an out of date version of NTFS32 and then installed Tuxera NTFS for Mac.
EtreCheck version: 2.0.8 (95)
Report generated October 30, 2014 7:11:17 PM EDT
Hardware Information: ℹ️
iMac (24-inch Mid 2007) (Verified)
iMac - model: iMac7,1
1 2.8 GHz Intel Core 2 Duo CPU: 2-core
4 GB RAM
BANK 0/DIMM0
2 GB DDR2 SDRAM 667 MHz ok
BANK 1/DIMM1
2 GB DDR2 SDRAM 667 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
ATI,RadeonHD2600 - VRAM: 256 MB
iMac 1920 x 1200
System Software: ℹ️
OS X 10.8.5 (12F45) - Uptime: 0:17:34
Disk Information: ℹ️
WDC WD5000AAKS-40TMA0 disk0 : (500.11 GB)
S.M.A.R.T. Status: Verified
disk0s1 (disk0s1) <not mounted> : 210 MB
ML 10.8 (disk0s2) / [Startup]: 499.25 GB (20.92 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
USB Information: ℹ️
Apple Inc. Built-in iSight
Apple Computer, Inc. IR Receiver
Logitech USB Receiver
Apple Inc. Bluetooth USB Host Controller
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Applications/Hardware Monitor ƒ/HardwareMonitor.app
[loaded] com.bresink.driver.BRESINKx86Monitoring (7.0) Support
/Applications/Parallels Desktop.app
[not loaded] com.parallels.kext.hidhook (8.0 18615.948847) Support
[not loaded] com.parallels.kext.hypervisor (8.0 18615.948847) Support
[not loaded] com.parallels.kext.netbridge (8.0 18615.948847) Support
[not loaded] com.parallels.kext.usbconnect (8.0 18615.948847) Support
[not loaded] com.parallels.kext.vnic (8.0 18615.948847) Support
/Applications/Toast Titanium v11.1/Spin Doctor.app
[not loaded] com.hzsystems.terminus.driver (4) Support
/Applications/Toast Titanium/Toast Titanium v11.1 (1072).app
[not loaded] com.roxio.TDIXController (2.0) Support
/Library/Application Support/Symantec/AntiVirus
[loaded] com.symantec.kext.SymAPComm (12.2f1 - SDK 10.6) Support
/System/Library/Extensions
[loaded] com.Logitech.Control Center.HID Driver (3.9.0 - SDK 10.6) Support
[loaded] com.eltima.ElmediaPlayer.kext (1.58 - SDK 10.4) Support
[not loaded] com.hzsystems.driver.CDSDAudioCaptureSupport (1.5) Support
[not loaded] com.increw.kext.speedit (0.32) Support
[loaded] com.logitech.manager.kernel.driver (4.10.0 - SDK 10.8) Support
[not loaded] com.olympus.CamBlockCommandsDevice (2.0.0) Support
[not loaded] com.olympus.CamBlockCommandsDeviceUP (2.0.0) Support
[not loaded] com.palm.ClassicNotSeizeDriver (3.2.1) Support
[not loaded] com.roxio.BluRaySupport (1.1.6) Support
[not loaded] com.seagate.driver.PowSecDriverCore (5.1.1) Support
[loaded] com.symantec.kext.internetSecurity (5.2f1 - SDK 10.6) Support
[loaded] com.symantec.kext.ips (3.5f1 - SDK 10.6) Support
[loaded] com.symantec.kext.ndcengine (1.0f1 - SDK 10.6) Support
[loaded] com.taoeffect.ispy.kext (2.0.2 - SDK 10.2) Support
/System/Library/Extensions/OlympusDSCDriver.kext/Contents/PlugIns
[not loaded] com.olympus.CamFWSerialBusProtocolTransport (2.0.0) Support
[not loaded] com.olympus.CamUSBMassStorageClass (2.0.0) Support
/System/Library/Extensions/Seagate Storage Driver.kext/Contents/PlugIns
[not loaded] com.seagate.driver.PowSecLeafDriver_10_4 (5.1.1) Support
[not loaded] com.seagate.driver.PowSecLeafDriver_10_5 (5.1.1) Support
[not loaded] com.seagate.driver.SeagateDriveIcons (5.1.1) Support
/Users/[redacted]/Downloads/LCC Installer.app
[not loaded] com.Logitech.Unifying.HID Driver (1.3.1 - SDK 10.8) Support
Startup Items: ℹ️
TuxeraNTFSUnmountHelper: Path: /Library/StartupItems/TuxeraNTFSUnmountHelper
Startup items are obsolete and will not work in future versions of OS X
Launch Agents: ℹ️
[running] com.canon.MFManager.plist Support
[not loaded] com.cooliris.SetLaunchArch.plist Support
[loaded] com.google.keystone.agent.plist Support
[running] com.Logitech.Control Center.Daemon.plist Support
[running] com.logitech.manager.daemon.plist Support
[running] com.micromat.TechToolProAgent.plist Support
[loaded] com.oracle.java.Java-Updater.plist Support
[running] com.seagate.SeagateStorageGauge.plist Support
[running] com.symantec.uiagent.application.plist Support
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist Support
[running] com.cleverfiles.cfbackd.plist Support
[running] com.eltima.ElmediaPlayer.daemon.plist Support
[loaded] com.embraceware.awaken.plist Support
[loaded] com.google.keystone.daemon.plist Support
[loaded] com.macpaw.CleanMyMac2.Agent.plist Support
[running] com.micromat.TechToolProDaemon.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[loaded] com.oracle.java.Helper-Tool.plist Support
[loaded] com.oracle.java.JavaUpdateHelper.plist Support
[loaded] com.prosofteng.DriveGenius.locum.plist Support
[running] com.smithmicro.schedulerdaemon.plist Support
[loaded] com.symantec.liveupdate.daemon.ondemand.plist Support
[failed] com.symantec.liveupdate.daemon.plist Support
[not loaded] com.symantec.sep.migratesettings.plist Support
[running] com.symantec.sharedsettings.plist Support
[running] com.symantec.symdaemon.plist Support
[running] com.taoeffect.ispyd.plist Support
[running] com.wdc.drivemanagerservice.plist Support
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist Support
[loaded] com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist Support
[loaded] com.macpaw.CleanMyMac2Helper.scheduledScan.plist Support
[loaded] com.macpaw.CleanMyMac2Helper.trashWatcher.plist Support
[running] com.prosofteng.DGMonitor.plist Support
[running] com.smithmicro.cleaning.schedulermailer.plist Support
[running] com.taoeffect.EspionageHelper.plist Support
User Login Items: ℹ️
Speedy Mac Application (/Applications/Speedy Mac/Speedy Mac.app)
AwakenHelper Application (/Users/[redacted]/Library/Application Support/Awaken/AwakenHelper.app)
GetBackupAgent Application (/Users/[redacted]/Library/Application Support/BeLight Software/Get Backup 2/GetBackupAgent.app)
WDDriveUtilityHelper Application (/Users/[redacted]/Downloads/WD/WD Drive Utilities.app/Contents/Resources/WDDriveUtilityHelper.app)
ClustersHelper Application (/Library/PreferencePanes/Clusters.prefPane/Contents/Resources/ClustersHelper.a pp)
RealPlayer Downloader Agent Application (/Users/[redacted]/Library/Application Support/RealNetworks/RealPlayer Downloader Agent.app)
SAVDiskMountNotify UNKNOWN (missing value)
ScanNotification UNKNOWN (missing value)
Launch Nikon Message Center 2 Application (/Applications/Nikon Software/Nikon Message Center 2/Nikon Message Center 2.app/Contents/SharedSupport/Launch Nikon Message Center 2.app)
Internet Plug-ins: ℹ️
EPPEX Plugin: Version: 10.0 Support
Flash Player: Version: 15.0.0.189 - SDK 10.6 Support
AdobePDFViewer: Version: 9.4.6 Support
Unity Web Player: Version: UnityPlayer version 3.5.3f3 - SDK 10.6 Support
NPVirtools: Version: 4.0 Support
iPhotoPhotocast: Version: 7.0 - SDK 10.8
RealPlayer Plugin: Version: (null) Support
DirectorShockwave: Version: 11.6.8r638 Support
QuickTime Plugin: Version: 7.7.1
FlashPlayer-10.6: Version: 15.0.0.189 - SDK 10.6 Support
GarminGpsControl: Version: 2.9.3.0 Release Support
ToontownBundleManager: Version: (null) Support
CANONiMAGEGATEWAYDL: Version: 3.1.0.2 Support
Silverlight: Version: 5.1.10411.0 - SDK 10.6 Support
OVSHelper: Version: 1.0 Support
CoolirisWebKitPlugin: Version: (null) Support
Google Earth Web Plug-in: Version: 6.1 Support
Flip4Mac WMV Plugin: Version: 3.2.0.16   - SDK 10.8 Support
SharePointBrowserPlugin: Version: 14.4.4 - SDK 10.6 Support
JavaAppletPlugin: Version: Java 7 Update 67 Check version
OfficeLiveBrowserPlugin: Version: 12.3.6 Support
User Internet Plug-ins: ℹ️
BrowserPlus_2.9.2: Version: 2.9.2 Support
Picasa: Version: 1.0 Support
Safari Extensions: ℹ️
DivX Plus Web Player HTML5 <video>
Open in Internet Explorer
DivX HiQ
Aimersoft Video Converter
3rd Party Preference Panes: ℹ️
BrowserPlus Support
Clusters Support
Déjà Vu Support
Flash Player Support
Flip4Mac WMV Support
Java Support
Logitech Control Center Support
Logi Preference Manager Support
MenuMeters Support
Perian Support
Symantec QuickMenu Support
TechTool Protection Support
Tuxera NTFS Support
Time Machine: ℹ️
Skip System Files: NO
Auto backup: YES
Destinations:
iMac TimeMachine [Local]
Total size: 2 TB
Total number of backups: 80
Oldest backup: 2011-09-18 05:21:33 +0000
Last backup: 2014-10-05 20:18:55 +0000
Size of backup disk: Excellent
Backup size 2 TB > (Disk size 0 B X 3)
/sbin excluded from backup!
/usr excluded from backup!
/System excluded from backup!
/bin excluded from backup!
/private excluded from backup!
/Library excluded from backup!
/Applications excluded from backup!
Top Processes by CPU: ℹ️
      2% WindowServer
      0% Speedy
      0% SystemUIServer
      0% RealPlayer Downloader Agent
      0% ps
Top Processes by Memory: ℹ️
288 MB SymDaemon
150 MB Speedy
137 MB Safari
82 MB WebProcess
82 MB coreservicesd
Virtual Memory Information: ℹ️
2.17 GB Free RAM
1.46 GB Active RAM
148 MB Inactive RAM
518 MB Wired RAM
388 MB Page-ins
0 B Page-outs
I hope someone has some ideas! TIA.

Do you have another cable you can test with? Do you have access to another computer with Firewire you can test with?
FireWire Device not Working
FireWire/USB - Quick Assist

HT202274 Password change old password not recognized after 10.9.5 upgrade

God bless you, peace.
macbook pro 2012 user password not recognized after 10.9.4 too 10.9.5 upgrade plus tech work at apple.
I want to change user password, it is allowing me to get into user account and admin account on computer but I recently changed it for the tech work to be done. I would like to put the password back now to old password or a new one but... The few days old new password pre update and pre tech work is not being accepted to allow me to change to another password.
recent update, after 10.9.4 to 10.9.5 update and apple tech work done.
1. Tech work replaced optical drive,
2. 10.9.4 to 10.9.5 upgrade left computer endlessly booting up, then got into finder window tried to read backup drive and screen went to black curser and could not backup information as techs decided may need to be done before I left it with them.
3. Also track pad was not (is not again) selecting text to drag unless real hard press and then only intermittently would select text or just drop the selection (not hold the selected text after a long scroll select, did work at first after tech work but back to not working). It is still not responding easily when pressed, but it is much better, as they did something with software they said. Today While typing this I am trying to select words misspelled and it does not select them unless I press not as hard it is becoming the same as before I see now, sometimes less pressure is needed but more than should be used.
I noticed today after tech work The Spell check is not responding with a two finger tap on the red underlined misspelled words without multiple try's with two finger tap. The curser moves around after selecting words also, or when selecting words so hard the curser moves to another place not on the desired words or check box. The curser arrow tip should select the word but it does not recognize unless I put the tail of the arrow onto the word then it recognizes the misspelled word for spell check on two finger gesture.
It looks like I need to take it back, I tried to call and check to confirm if the track pad intermittently and curser adjustment was serviced. In order to verify I had called three times to get that information to no avail. endless looped in the phone que, one would answer take info and then forward me to a endless loop dial ing phone that never was picked up, supposedly at the Bay street store tech section. Phone voice mail from apple support status on the repair, ...Juliano from Bay Street Apple repair store Emeryville, ca left a voice message... just generically said optical drive replacement is successfulI, I noticed right away three items were to be addressed but only the optical drive was mentioned, so I called three times to try and verify the other problems. One whole minute just to select this text and copy it to notes for a backup. It would not select at first, then after selected it would not copy it, then it would not paste to notes, it paste the last cut and paste I did 10 minutes ago.
I do not have a easy excellent wifi connection for my wifi only phone and would prefer email or chat for repair help. apple Repair No: R142180337

Try running the combo update. It fixes more files/data than the App Store upgrade.
10.9.2

Camera RAW, file not recognized after import and migration, Aperture 2.1

Hi,
I have recently purchased a 1DMKIII and am constantly getting "file not recognized" after I import and even after migrating RAW files. My 1DS MK1 RAW files have no issues. The RAW files render just fine using CS4 bridge. Any ideas here on a fix? Other than ditching Aperture (not desireable)
Thanks,
Greg

Hummmm..I have just 'manned-up' from a 2gb macbook running tiger+CS4 to a iMac 24" 8gb running leopard BUT!
I shoot RAW and the iMac will not recognize the NEF RAW files! this is soo frustrating - tried to update Camera Raw but to no avail.
please help! I've got 987 raw wedding photos to process!!
I dont know what to do!

Ipod touch 5th gen will not sync after windows 8.1 update

ipod touch 5th gen will not sync after windows 8.1 update. Computer see's Itouch as mass storage and charges. Worked with Window's 8 fine, as soon as update was done and restarted computer Itouch doesn't show up. Itouch seen on two other computers.

See:
iOS: Device not recognized in iTunes for Windows
I would start with
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
Run this to help if it identifies the cause
iTunes for Windows: Device Sync Tests
Have you tried on another computer to help determine if you have a computer or iPod problem?

IPad 2 switched off and not charging after iOS 7.1 update

iPad 2 switched off and not charging after iOS 7.1 update. Pls help me. I have tested my charger. Its working in another device. But my iPad 2 is not charging with other adapters too. What to do??

Hello, 92.romil.
Thank you for visiting Apple Support Communities.
I would make sure you are using an Apple branded cable with your iPad. If you are, the troubleshooting steps in the article below may help. The steps listed below for the iPhone and iPod still apply to your iPad.
Resolving issues
If your battery doesn't charge, or if your device shows a low-battery image, black screen, or "accessory not supported" alert, follow these steps.
Inspect the connector at the bottom of the phone:
Make sure that there are no bent pins in the connector.
Make sure that the connector is free from debris.
If there are bent pins or debris, please contact Apple Support.
Otherwise, continue troubleshooting.
Make sure that the outlet you're using works.
Make sure that the Apple USB cable and Apple USB power adapter work.
Plug the device in to power and let it charge for up to 30 minutes. If you don't have an Apple USB power adapter, try connecting to a computer's high-power USB 2.0 port (not a keyboard). The computer must be on.
If the device still exhibits an issue, try turning your device off and then on again while connected to power.
If the issue is persists, please contact Apple Support.
iPhone and iPod touch: Charging the battery
http://support.apple.com/kb/HT1476
Cheers,
Jason H.

Illustrator tools dropdown is not working after the recent software update

My Illustrator tools dropdown is not working after the recent software update. Any help would much appreciate.

Same problem here. I have a Mac with a recent Yosemite update.

Pleasee help me ,,my id could not use after my account to update id

pleasee help me ,,my id could not use after my account to update id

Hello, beersaditya.
Thank you for visiting Apple Support Communities.
I would recommend reaching out to our Apple ID account security team to assist you with this issue.
Apple ID: Contacting Apple for help with Apple ID account security
http://support.apple.com/kb/HT5699
Cheers,
Jason H.

Firewire port not recognized after 10.7.5 update??

Similar Messages

Maybe you are looking for