Firewire Port not working, URGENT help please¡¡¡
Hello People, i´ve just got a new Mac Mini last week, and i´ve been trying to get my Alesis MasterControl audio interface, and is just a complete mess.
This happened right after i´ve upgraded to 10.8.3 so i don´t know, the weird thing is that if i connect my old iBook to the Mac Mini the FW800 port works, but everytime i connect the audio interface, nothing happens, also the drivers from alesis, are up to date. i first thought about the port of the Mixer went bad, but it has 2 and non of them works, also thought about the cable but the same cable works when i connect my iBook, and the mixer is not bus powered, it has it´s own power supply.
Needless to say i´ve already done the usual reset PRAM, turn of the Mac unplugged for 30 hour to reset the bus. etc.
This is the usual firewire only system log that i get:
31/03/13 08:01:20.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in now active, GUID 003ee1fffe88dc6a; max speed s800.
31/03/13 08:01:30.000 kernel[0]: Alesis Firewire - 3.5.6.11675 (x86_64) Aug 16 2011 01:20:23
31/03/13 11:33:23.529 system_profiler[528]: SPFWR ERROR: FireWire bus may be unstable. Other FireWire devices may be present.
31/03/13 11:35:43.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: no valid selfIDs for more than 3 minutes after bus reset.
31/03/13 11:38:55.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: no valid selfIDs for more than 3 minutes after bus reset.
31/03/13 11:42:08.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: no valid selfIDs for more than 3 minutes after bus reset.
31/03/13 11:44:39.124 CleanMyMacHelperTool[583]: Mounted devices (
"/Volumes/AlesisFirewire-3.5.3.8671"
31/03/13 11:44:39.146 CleanMyMacHelperTool[583]: Wont clean /Volumes/AlesisFirewire-3.5.3.8671 because disk image
31/03/13 11:44:39.148 CleanMyMacHelperTool[583]: Mounted devices (
"/Volumes/AlesisFirewire-3.5.3.8671"
31/03/13 11:44:39.149 CleanMyMacHelperTool[583]: Wont clean /Volumes/AlesisFirewire-3.5.3.8671 because disk image
31/03/13 11:44:52.727 coreservicesd[62]: Application App:"AlesisFirewireUninstaller" [ 0x0/0x7f07f] @ 0x0x7fb5c8c30050 tried to be brought forward, but isn't in fPermittedFrontASNs ( ( ASN:0x0-0x80080:) ), so denying.
31/03/13 11:44:52.727 WindowServer[85]: [cps/setfront] Failed setting the front application to AlesisFirewireUninstaller, psn 0x0-0x7f07f, securitySessionID=0x186a5, err=-13066
31/03/13 11:47:28.533 CleanMyMacHelperTool[656]: Mounted devices (
"/Volumes/AlesisFirewire-3.5.3.8671",
"/Volumes/AlesisFirewire-3.5.6.11675"
31/03/13 11:47:28.544 CleanMyMacHelperTool[656]: Mounted devices (
"/Volumes/AlesisFirewire-3.5.3.8671",
"/Volumes/AlesisFirewire-3.5.6.11675"
31/03/13 11:49:26.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: no valid selfIDs for more than 3 minutes after bus reset.
31/03/13 11:52:39.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: no valid selfIDs for more than 3 minutes after bus reset.
31/03/13 11:57:22.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in now active, GUID 003ee1fffe88dc6a; max speed s800.
31/03/13 11:57:34.000 kernel[0]: Alesis Firewire - 3.5.3.8671 preliminary - x86_64 CJ - May 3 2010 02:43:28
31/03/13 11:58:36.982 com.apple.launchd.peruser.501[155]: ([0x0-0x1d01d].tc.tctechnologies.AlesisFirewire.controlpanel[238]) Job appears to have crashed: Abort trap: 6
31/03/13 11:58:37.252 ReportCrash[242]: Saved crash report for AlesisFirewire Control Panel[238] version 3.5.3 (3.5.3.8671) to /Users/m1kygarcia/Library/Logs/DiagnosticReports/AlesisFirewire Control Panel_2013-03-31-115837_Mac-mini-de-Miguel.crash
31/03/13 11:58:39.831 system_profiler[267]: SPFWR ERROR: FireWire bus may be unstable. Other FireWire devices may be present.
31/03/13 11:58:50.676 com.apple.launchd.peruser.501[155]: ([0x0-0x23023].tc.tctechnologies.AlesisFirewire.controlpanel[274]) Job appears to have crashed: Abort trap: 6
31/03/13 11:58:50.837 ReportCrash[242]: Saved crash report for AlesisFirewire Control Panel[274] version 3.5.3 (3.5.3.8671) to /Users/m1kygarcia/Library/Logs/DiagnosticReports/AlesisFirewire Control Panel_2013-03-31-115850_Mac-mini-de-Miguel.crash
31/03/13 11:58:53.638 system_profiler[277]: SPFWR ERROR: FireWire bus may be unstable. Other FireWire devices may be present.
31/03/13 11:59:09.747 CleanMyMacHelperTool[300]: Mounted devices (
"/Volumes/AlesisFirewire-3.5.6.11675"
31/03/13 11:59:09.905 CleanMyMacHelperTool[300]: Wont clean /Volumes/AlesisFirewire-3.5.6.11675 because disk image
31/03/13 11:59:09.906 CleanMyMacHelperTool[300]: Mounted devices (
"/Volumes/AlesisFirewire-3.5.6.11675"
31/03/13 11:59:09.907 CleanMyMacHelperTool[300]: Wont clean /Volumes/AlesisFirewire-3.5.6.11675 because disk image
31/03/13 12:00:47.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in now active, GUID 003ee1fffe88dc6a; max speed s800.
31/03/13 12:00:59.000 kernel[0]: Alesis Firewire - 3.5.6.11675 (x86_64) Aug 16 2011 01:20:23
31/03/13 12:01:56.720 system_profiler[269]: SPFWR ERROR: FireWire bus may be unstable. Other FireWire devices may be present.
31/03/13 12:05:40.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: no valid selfIDs for more than 3 minutes after bus reset.
31/03/13 12:08:52.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: no valid selfIDs for more than 3 minutes after bus reset.
31/03/13 12:12:42.277 AlesisFirewire Control Panel[245]: -_continuousScroll is deprecated for NSScrollWheel. Please use -hasPreciseScrollingDeltas.
31/03/13 12:12:42.277 AlesisFirewire Control Panel[245]: -deviceDeltaX is deprecated for NSScrollWheel. Please use -scrollingDeltaX.
31/03/13 12:12:42.278 AlesisFirewire Control Panel[245]: -deviceDeltaY is deprecated for NSScrollWheel. Please use -scrollingDeltaY.
31/03/13 12:13:53.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: no valid selfIDs for more than 3 minutes after bus reset.
31/03/13 12:25:29.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in now active, GUID 003ee1fffe88dc6a; max speed s800.
31/03/13 12:25:38.000 kernel[0]: Alesis Firewire - 3.5.6.11675 (x86_64) Aug 16 2011 01:20:23
31/03/13 12:28:30.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: no valid selfIDs for more than 3 minutes after bus reset.
31/03/13 12:28:33.906 system_profiler[273]: SPFWR ERROR: FireWire bus may be unstable. Other FireWire devices may be present.
31/03/13 12:31:41.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: no valid selfIDs for more than 3 minutes after bus reset.
31/03/13 12:35:16.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in now active, GUID 003ee1fffe88dc6a; max speed s800.
31/03/13 12:35:26.000 kernel[0]: Alesis Firewire - 3.5.6.11675 (x86_64) Aug 16 2011 01:20:23
31/03/13 12:37:53.513 system_profiler[266]: SPFWR ERROR: FireWire bus may be unstable. Other FireWire devices may be present.
31/03/13 12:39:36.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in now active, GUID 003ee1fffe88dc6a; max speed s800.
31/03/13 12:39:49.000 kernel[0]: Alesis Firewire - 3.5.6.11675 (x86_64) Aug 16 2011 01:20:23
31/03/13 12:42:55.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: 53 bus resets in last 3 minutes.
31/03/13 12:46:50.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: 68 bus resets in last 3 minutes.
31/03/13 13:01:30.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in now active, GUID 003ee1fffe88dc6a; max speed s800.
31/03/13 13:01:41.000 kernel[0]: Alesis Firewire - 3.5.6.11675 (x86_64) Aug 16 2011 01:20:23
31/03/13 13:05:27.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: 79 bus resets in last 3 minutes.
31/03/13 13:06:31.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: no valid selfIDs for more than 3 minutes after bus reset.
31/03/13 13:09:43.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: no valid selfIDs for more than 3 minutes after bus reset.
31/03/13 13:13:31.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in now active, GUID 003ee1fffe88dc6a; max speed s800.
31/03/13 13:13:45.006 com.apple.kextd[11]: Can't load /System/Library/Extensions/IOFireWireIP.kext - ineligible during safe boot.
31/03/13 13:13:45.008 com.apple.kextd[11]: Load com.apple.iokit.IOFireWireIP failed; removing personalities from kernel.
31/03/13 13:13:54.818 com.apple.kextd[11]: Can't load /System/Library/Extensions/AlesisFirewire.kext - ineligible during safe boot.
31/03/13 13:13:54.823 com.apple.kextd[11]: Load tc.tctechnologies.driver.AlesisFirewire failed; removing personalities from kernel.
31/03/13 13:13:56.372 com.apple.kextd[11]: Can't load /System/Library/Extensions/AlesisFirewire.kext - ineligible during safe boot.
31/03/13 13:13:56.375 com.apple.kextd[11]: Load tc.tctechnologies.driver.AlesisFirewire failed; removing personalities from kernel.
31/03/13 13:15:40.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: no valid selfIDs for more than 3 minutes after bus reset.
31/03/13 13:18:46.763 com.apple.kextd[11]: Can't load /System/Library/Extensions/IOFireWireIP.kext - ineligible during safe boot.
31/03/13 13:18:46.768 com.apple.kextd[11]: Load com.apple.iokit.IOFireWireIP failed; removing personalities from kernel.
31/03/13 13:18:46.797 com.apple.kextd[11]: Can't load /System/Library/Extensions/AlesisFirewire.kext - ineligible during safe boot.
31/03/13 13:18:46.800 com.apple.kextd[11]: Load tc.tctechnologies.driver.AlesisFirewire failed; removing personalities from kernel.
31/03/13 13:18:50.775 system_profiler[221]: SPFWR ERROR: FireWire bus may be unstable. Other FireWire devices may be present.
31/03/13 13:18:52.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: no valid selfIDs for more than 3 minutes after bus reset.
31/03/13 13:21:03.488 system_profiler[235]: SPFWR ERROR: FireWire bus may be unstable. Other FireWire devices may be present.
31/03/13 13:22:37.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: no valid selfIDs for more than 3 minutes after bus reset.
31/03/13 13:24:07.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in now active, GUID 003ee1fffe88dc6a; max speed s800.
31/03/13 13:24:19.000 kernel[0]: Alesis Firewire - 3.5.6.11675 (x86_64) Aug 16 2011 01:20:23
31/03/13 13:31:00.926 system_profiler[316]: SPFWR ERROR: FireWire bus may be unstable. Other FireWire devices may be present.
31/03/13 13:33:03.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: 134 bus resets in last 3 minutes.
31/03/13 13:35:11.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: no valid selfIDs for more than 3 minutes after bus reset.
31/03/13 13:38:24.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: no valid selfIDs for more than 3 minutes after bus reset.
31/03/13 13:41:36.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: no valid selfIDs for more than 3 minutes after bus reset.
31/03/13 13:44:48.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: no valid selfIDs for more than 3 minutes after bus reset.
31/03/13 13:58:13.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: no valid selfIDs for more than 3 minutes after bus reset.
31/03/13 14:01:25.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: no valid selfIDs for more than 3 minutes after bus reset.
Can somebody help, please i´d gladly appreciate it.
I have this
System Profiler[170]
SPFWR ERROR: FireWire bus may be unstable. Other FireWire devices may be present.
& this
kernel FireWire (OHCI) Lucent ID 5901 built-in: no valid selfIDs for more than 3 minutes after bus reset.
Pls, help!!
Similar Messages
-
IMessage and FaceTime not working, Urgent Help please!!!
Hi guys,
Need help urgently, my iMessage and FaceTime are both not working on my Macbook Pro.
The iMessage gives giving this message "Could not sign in. Please check your network connection and try again.", while FaceTime just simply cannot login.
Please help!!!This could be a complicated problem to solve, as there are many possible causes for it. Test after taking each of the following steps that you haven't already tried. Back up all data before making any changes.
Before proceeding, test on another network, if possible. That could be a public Wi-Fi hotspot, if your computer is portable, or a cellular network if you have a mobile device that can share its Internet connection. If you find that iMessage works on the other network, the problem is in your network or at your ISP, not in your computer.
Step 1
Check the status of the service. If the service is down, wait tor it to come back up. There may be a localized outage, even if the status indicator is green.
Step 2
Sign out of iMessage and FaceTime on all your Apple devices. Log out and log back in. Try again to sign in.
Step 3
Restart your router and your broadband device, if they're separate. You may have to skip this step if you don't control those devices.
Step 4
From the menu bar, select
▹ About This Mac
Below the "OS X" legend in the window that opens, the OS version appears. Click the version line twice to display the serial number. If the number is missing or invalid according to this web form, take the machine to an Apple Store or other authorized service center to have the problem corrected.
Step 5
Take the steps suggested in this support article. If you don't understand some of the steps or can't carry them out, ask for guidance.
Step 6
From the menu bar, select
▹ System Preferences... ▹ Network
If the preference pane is locked, click the lock icon in the lower left corner and enter your password to unlock it. Then click the Advanced button and select the Proxies tab. If the box marked SOCKS Proxy is checked, uncheck it. You don’t need to change any other settings in the window. Click OK and then Apply. Test.
The result may be that you can't connect to the Internet at all. Revert the change if that happens, or if iMessage still doesn't work. Remember that you must Apply any changes you make in the preference pane before they take effect.
Step 7
Select from the menu bar
▹ System Preferences… ▹ Flash Player ▹ Storage
and click
Block all sites from storing information on this computer
Close the preference pane.
Step 8
Make sure you know the ID and password you use with iMessage. Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Use the search box in the toolbar of the Keychain Access window to find and delete all items with "iMessage" or "com.apple.idms" in the name. Log out and log back in.
Step 9
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
If iMessage worked in the guest account, stop here and post your results.
Step 10
Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you start up, and again when you log in.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start and run than normal, with limited graphics performance, and some things won’t work at all, including sound outputand Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. After testing, restart as usual (i.e., not in safe mode) and test again.
If iMessage worked in safe mode, but still doesn't work when you restart in "normal" mode, stop here and post your results.
Step 11
Triple-click anywhere in the line below on this page to select it:
/Library/Preferences/com.apple.apsd.plist
Right-click or control-click the highlighted line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item selected. Move the selected item to the Trash. You may be prompted for your administrator login password. Restart the computer and empty the Trash.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
Step 12
Reset the NVRAM.
Step 13
Reset the System Management Controller (SMC).
Step 14
Reinstall OS X.
Step 15
If none of the above steps resolves the issue, make a "Genius" appointment at an Apple Store, or contact Apple Support. When you set up a support call, select "Apple ID" as the product you need help with, not the hardware model. That way, if you're not under AppleCare, you may be able to talk your way out of being charged for the call. -
TrackPad Not Working - Urgent help please
Hi all
Hope you can help.
The top case of my 12 G4 PowerBook is damaged so I bought a replacment.
Fitted it and the tackpad would not work. Got another and the same result, the trackpad would not work. I made sure with the second one, that the topcase came from exactly the same spec as my PowerBook incase that was the issue.
Is there a way I can find out what is going on please?
Or a way I can get my 12" to see the new tracpad?
Many kind thanksLook at this link.
http://support.apple.com/kb/TA25889?viewlocale=en_US
You need to add your Mac model & OS to your profile.
Cheers, Tom -
Since I upgrade to Lion OS my optical drive stop working can't read or write at all I did what I could to fix it but still not working , any help please
It sounds like you may have multiple problems, but none of them are likely to be caused by malware.
First, the internet-related issues may be related to adware or a network compromise. I tend to lean more towards the latter, based on your description of the problem. See:
http://www.adwaremedic.com/kb/baddns.php
http://www.adwaremedic.com/kb/hackedrouter.php
If investigation shows that this is not a network-specific issue, then it's probably adware. See my Adware Removal Guide for help finding and removing it. Note that you mention AdBlock as if it should have prevented this, but it's important to understand that ad blockers do not protect you against adware in any way. Neither would any kind of anti-virus software, which often doesn't detect adware.
As for the other issues, it sounds like you've got some serious corruption. I would be inclined to say it sounds like a failing drive, except it sounds like you just got it replaced. How did you get all your files back after the new drive was installed?
(Fair disclosure: I may receive compensation from links to my sites, TheSafeMac.com and AdwareMedic.com, in the form of buttons allowing for donations. Donations are not required to use my site or software.) -
My macbook pro external speaker not working! help please
My macbook pro external speaker not working! help please
1. Applications > Utilities > Audio MIDI Setup
Audio Devices window
Pllug in the speakers.
Do they show up?
Make sure that Mute is not enabled.
2. Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
Best. -
20" Cinema display with USB and firewire ports not working
I have a new 20" display and was wondering why my USB and fire wire ports at the back are not working. I have an external drive that is powered hooked up to the fire wire port and a no powered piano keyboard to a usb port.
Any help pleaseVerify that the display’s USB and FireWire cables are firmly plugged in to the
computer. Do they show in your profiler?
Try different ports in the computer.
Verify that your computer ports are working with other known problem free device. -
WEBUTIL not working, some help please
Hi,
I am new to Forms 10G and I am starting conversion from Forms 6i. I think I have setup WEBUTIL as decribed in Oracle documentation, step by step. I noticed that none of the calls to WEBUTIL API's are working. For test I tried to delete a file by running: "client_host('cmd /c del c:\putty.log');"
It came back with error:
"oracle.forms.webutil.host.Host bean not found. WEBUTIL_HOST.Execute will not work."
What am I missing? Could anyone help please?
Thanks.I have done the following test:
1. Create new module
2. Add a block manualy
3. Add a button on the block
4. In the WHEN-BUTTON-PRESSED trigger add : "client_host('cmd /c del c:\putty.log');"
5. Attach webutil.pll removing the path
6. Compiled Ok
7. Executing the form returns the error mentioned above
than
8. Open webutil.olb object library from form builder
9. Double click on the MAIN tab
10. Drag the WEBUTIL object group under object groups node of my form subclassing it which added the following objects to my form:
a) WEBUTIL_ERROR under alerts node
b) WEBUTIL under data blocks node
c) WEBUTIL_CANVAS under canvases node
d) WEBUTIL under object groups node
e) WEBUTIL_HIDDEN_WINDOW under windows node
11. Compile OK
12. Works
Hope this helps,
Alex -
tonight, my DVD burner and my Firewire HD are not being detected. I tried to see if system profiler recoginized my firewire port, but All I got was 'No information found.' what can I do to fix this? I need to access this FW hd because it contains all of my music, photos and critical data! thanks!
it seems weird that it just magically started working!
-
Elements 10 not working and uninstall not working either help please?
Elements 10 does not work and I have tried to uninstall it with the intention of re-installing. When I press un-install it tells me it is still uninstalling or changing the program but this has been happening for three hours? Windows installer is saying 'cancelling' the same for two hours. I am stuck please help. Many thanks in advance from a well qualified luddite!
Update - I am manually un-installing because as I can't get photoshop to work - (it says it is scanning for updated and never stops -) I assume it is corrupt. I have selected it and then uninstalled - had no further options offered to me and now it is saying ' please wait until the current program is finished unistalling or being changed' I am totally confused. Now I am getting the message 'Install server not responding' Please help.
-
SB X-fi Xtreme Audio PCI-E Not working correctly help please
Hi i have a SB X-fi Xtreme Audio PCI-E card on my pc , i have currently installed windows 7 and for months now i am trying to make the card work .. I have a poor sound especially when there is bass, the card is not detected by windows 7, its detected as a high definition audio device , when i plug my mic is not found..and i cant use the creative applications because is says its not supported or i have no creative poroducts on my pc ... I have tried all the latest drivers and stil have the same problem.. HELP PLEASE !!
First, uninstall all creative drivers, console, from add/remove. Restart computer install: . X-Fi Xtreme Audio Series Driver .04.0000 from creative website. 2.X-Fi Xtreme Audio Pack .03.0002 from creative website. 3. install Creative Console from here: http://forums.creative.com/t5/Sound-Blaster/PAX-Console-Launcher-V-0/td-p/549970 * PAX Console, Modded Original Console, but newer then Creative) or this creative console: CSL_PCAPP_LB_2_6_09.exe ( it creative original console) With this console you will have bass, treble, etc, BUT you need to open ConsoLCu.exe from Program Files/Creative/Console Launcher. ConsoLCu.exe have all the options you need. Creative forget about thier sound board, thier drivers, bass, treble, etc, about customers. If you install thier drivers from their website you will not have BASS, and also an crappy sound. You need to install Creative Console from google, or from http://forums.creative.com/t5/Sound-Blaster/PAX-Console-Launcher-V-0/td-p/549970 to have bass, crystalizer, etc. I also have Creative Audio PCI-e board..... crappy chipset, just like Sb Li've 24 biti PCI.
-
Firewire port not working Mac Mini (G4 1.25ghz)
Hi,
The firewire port isn't working on my mac mini, I've tried several devices, but none are connecting. I was wondering if anyone else was having this issue and possibly a solution. The only software installed on the computer since the firewire worked last was Apple updates, so maybe other mini's lost firewire somewhere along the way.
Thanks, and Thanks
WThis worked from Smokerz in the Power Mac G4 forum:
1. Shut-down your Mac, and unplug the power cord
2. Turn the power off on your external FireWire devices
3. Unplug the FireWire devices from the Mac
4. Wait for 5 min.
5. Plug the power cord to your Mac only
6. For PPC Macs: Restart the Mac while holding the Option-Apple-O-F, and keep holding until you get the ">" prompt, then release the keys
7. At the ">" prompt type:
reset-nvram and hit the Return key
set-defaults and hit the Return key
reset-all and hit the Return key
the last command will restart your mac
8. Shut down your Mac
9. Connect all your FireWire devices to the Mac and turn them on
10. Restart your Mac.
Works fine now thanks Smokerz!!!!!
also repaired permission and reset PRAM, nothing worked until I did this.
W -
T42 keyboard not working right, HELP PLEASE
My keyboard is not working right. If I push the key it wont work,but if I hold the key for a couple seconds then it works was told to replace the keyboard and I did with a new one. But it is still doing it. Can anyone tell me what the problem is. Model # R4U machine type 2378, OS XP-PRO , COA SP2 , S/N L3xxxxx.
Message Edited by scottzilla on 12-15-2008 10:05 PM
Moderator Note; s/n edited for members own protection
Message Edited by andyP on 12-16-2008 07:57 AMIt's the Quick Selection Tool in Photoshop Elements 9 and I'm trying to get the background and make it another layer so I can even out the color of the background then bring down the transparency. Not sure if that makes sense. I'm new to this.... Sometimes the area it will grab can go ...not fast.. but not slow. Sometimes it's like it's just messed up and literally takes 30 seconds to process each move. I rebooted my computer and re opened it and it helped a little. It's not clear what causes it when it messes up and when it doesn't. Just frustrating. It's probably user error because I'm so new at Photoshop. Thanks for your input. I really appreciate it.
-
I tried importing email addresses from gmail and now my address book is locked up and will not work. Do I need to delete my address book software and reinstall? If so, what is the proper way to do this? New to Macbook software. I have tried several things and nothing has helped. I have backed up photos, movies, etc. My addresses are on my iphone so I can sync them later right if I loose my data?
Thanks for your time and expertise,
T.You can probably resolve this by removing some Address Book preference files rather than deleting your Address Book application.
First turn off Synchronize in Address Book Preferences if you can.
Next restart Address Book and try to export everything to your Desktop.
I have had a play and found my Address Book preference files. In the following ~/Library is the Library within your Home folder. Any numerals may differ on your Mac. Quit Address Book before doing anything with these.
1 - Display details and things set in Address Book Preferences
~/Library/Preferences/com.apple.AddressBook.plist
2 - Has no data - not sure what this does
~/Library/Preferences/com.apple.AddressBook.abd.plist
3 - Has last sync date - may have more if I used sync
~/Library/Preferences/ByHost/com.apple.AddressBook.sync.000393735c06.plist
4 - My contact details
/Library/Preferences/AddressBookMe.plist
5 - Individual addresses and groups stored as separate files within:
~/Library/Application Support/AddressBook/Metadata
6 - All of these addresses are are also in this single database:
~/Library/Application Support/AddressBook/AddressBook-v22.abcddb
If you wish to remove all addresses drag both 5 & 6 to your Desktop.
If you wish to reset preferences drag 1 your Desktop.
Removing 3 may resolve sync issues but I am unable to test this.
If you wish to reset everything drag all except 4 to your desktop.
Apple has an interesting page at: http://support.apple.com/kb/TS2481
I hope this helps. -
Realplayer and this particular site not working? help, please?
Hi,
if you go to this website:
http://www.samurai.fm/home/
And try to listen to the live broadcast the link will not work.
But i was on a ICAT with a friend and he has no problem listening to the live link, so its my problem obviously.
NOTE: if you got the Icon with the BROADCAST STATION is where you will find th live broadcast. (duh)
its interesting casue I can listen to any of the same website's "pre-recorded" links.
P.S I also have the most recent Realplayer downloaded.
hmmmWell what is it "envoking"?
This is what I am getting when I click on the LIVE Stream.
STEP 1
and then after clicking OK..
STEP 2
I have only seen these pop ups on their site.
AND, I do remember listening to their LIVE STREAM before.
So, what are you getting?
THanks fo your help. -
Fresh Install HCM 9.1 but Links not working. Help please
Dear All,
I'm trying to make a switch from SAP to PeopleSoft. I tought it easier to install PSFT since the number of source to install is much less than SAP. However, I kept getting same error where the links not working no matter which environment I tried to install.
I downloaded all software from eDelivery.
HCM 9.1, PTOOLS 8.52, Oracle 11g 64 bit, Oracle Client 32 bit.
First Try:
Install on windows 7 64bit. Everything works fine until first login to the PSFT and all links not working.
Suggestion from Hakan is to apply the patch and gave me a link to the old FTP site. I downloaded the 85209 patch but got password.
Finally I managed to get a customer ID from a friend and downloaded Patch 85211 and applied. But got java error so I scrapped it.
Anyway, Gasparotto said the environment is not certified and will not fix my problem with the patch.
Second Try:
Installed Virtual Box.
Installed Windows 2008 R2 and applied the SP1.
Installed everything all over again.
Ensured the PTWEBSERVER password similar the username.
Everything works fine but when login to PSFT, again..... links not working and see on the bottom left corner there are some javascript error where they cannot find certain peoplesoft objects..
Just upgraded to IE 9 because I read somewhere IE 8 is not certified.
Tried to login again, no error message and everything looks fine but... links not working.
Logs also looks normal to me.
Does anyone ever encountered similar issues before?
Does this is a normal behaviour before tools patch 85211 being applied ?
Thanks,
aLuNa
My APPSRV Log:
PSSAMSRV.12 (0) [11/03/12 09:04:46](0) PeopleTools Release 8.52 (WinX86) starting. Tuxedo server is APPSRV(99)/100
PSSAMSRV.12 (0) [11/03/12 09:04:46](0) Cache Directory being used: C:\APPSRV_CONFIG\appserv\HCDMO\CACHE\PSSAMSRV_100\
PSSAMSRV.12 (0) [11/03/12 09:04:46](0) Server started
PSRENSRV.2808 [11/03/12 09:04:49](0) PeopleTools Release 8.52 (WinX86) starting. Tuxedo server is RENGRP(92)/101
PSRENSRV.2808 [11/03/12 09:04:49](3) Switching to new log file C:\APPSRV_CONFIG\appserv\HCDMO\LOGS\PSRENSRV_1103.LOG
PSADMIN.2124 (0) [11/03/12 09:04:52](0) End boot attempt on domain HCDMO
PSAPPSRV.1488 (3) [11/03/12 09:13:16 GetCertificate](3) Returning context. ID=PTWEBSERVER, Lang=ENG, UStreamId=091316_1488.3, Token=PSFT_HR/2012-11-03-02.13.17.193528/PTWEBSERVER/ENG/XxZ3vyJWXF/S1MoQtG2Wox6wGJA=
PSAPPSRV.1488 (5) [11/03/12 09:13:21 GetCertificate](3) Returning context. ID=PTWEBSERVER, Lang=ENG, UStreamId=091321_1488.5, Token=PSFT_HR/2012-11-03-02.13.22.193632/PTWEBSERVER/ENG/pS6ec6pIAJJSYc1oOWcNYiR0UFQ=
PSAPPSRV.1488 (7) [11/03/12 09:13:29 GetCertificate](3) Returning context. ID=PS, Lang=ENG, UStreamId=091329_1488.7, Token=PSFT_HR/2012-11-03-02.13.30.193285/PS/ENG/3GnOezS6D9PUlzwrjPwqexv4ir0=
PSAPPSRV.1488 (34) [11/03/12 09:18:47 GetCertificate](3) Returning context. ID=PS, Lang=ENG, UStreamId=091847_1488.34, Token=PSFT_HR/2012-11-03-02.18.48.194158/PS/ENG//oJB5tvSHYNzsmZ2Gs4g2vBLUVs=alunwawa wrote:
Does anyone ever encountered similar issues before? Yes, I did already see the same, that was when installed the same with 8.52.00 (without Peopletools patch) or without applying the patch project...
Does this is a normal behaviour before tools patch 85211 being applied ?Without patch, you have the error you mentioned. How many time I told that 8.52.03 min. is required, I did not go further, but there was some bugs before which make it not working.
I understand that's rather frustrating for people who wants to jump to Peoplesoft. I don't know SAP, but here you go, Peoplesoft is not a simple toy.
Unfortunately, if you have no access to My Oracle Support to get the Peoplesoft patches, you have no way but work on Peoplesoft OVM (free of use), and to use them on VirtualBox, the Jim's articles are worth to follow.
Nicolas.
PS: @Jim, thanks for the kind words.
My last install guide is quite old now (PT8.50/Linux), even though it did not change very much within the last tools 8.52. But seeing the number of time such questions have asked over here (PT8.52 on Windows), I'm thinking to write one more, that time on Windows.
Maybe you are looking for
-
Bluetooth on iPhone does not find my iPad
Bluetooth on my iPhone does not find iPad when both devices are next to each other.
-
my family shares one apple id among 4 devices. how do i make it IMPPOSSIBLE for my children (i pad mini and i pod touch 5) to view my contacts and texts while still sharing my apps? please help. been working on this for hours.
-
Create fillable forms that automatically fill out a letter
Hi, so I'm new to acrobat (and adobe in general) and I wnated to know if anyone had a way of doing this. So what I want to do is to create a form that takes people's information. It will take things like Names, Phone numbers, emails, etc. Then, it wi
-
I just signed up for a skype number subscription and it works just fine when calling from skype to mobile or landline but when my skype number is called from a mobile or landline it goes to a business that is already using that number. Who do i conta
-
So to activate my second hand iPhone I have to log into the apple ID with the password that the phone was attatched to iCloud with but I don't know their apple ID or password and have no way to contact them. So what do I do??! If I take it to an appl