Firewire port on my iMac. Need help troubleshooting

I've been attempting to troubleshoot this issue for the past month, with no real solution or or glint of hope!
I'm having issues using my Motu firewire audio interface with my iMac (*late 2006 24" iMac*). Once the unit is connected to my iMac, it starts turning on and off. The same interface work flawlessly with two other macs. I've done the following sofar:
- re-installed audio drivers multiple times
- SMC resets many times (have lost count)
- Fresh new OS install
- Different firewire cables. Even tried the FW800 port.
I'm beginning to suspect the problem is with the power flow out of the Firewire port, since when the mac is shutdown, I still get the same problem when the interface is connected to my mac.
Firewire drives work fine. No problems. So its not a problem with firewire devices not mounting. I'm truly stumped!! Not sure why this is happening. Any info or technical advice is greatly appreciated.
thanks;
John

im having a similar problem the only difference is, the power stays on two interfaces the motu ultralite and the fw solo by m-audio but they dont show that there connected, with both the software and the system, any ideas??? anyone??? can my firewire be fried already? the cpu is almost 2 years old!

Similar Messages

Some DVDs not playing in my iMac, need help!

some orginial / genuine DVDs not playing in my iMac, need help!

Once your husband copied the movies, did he use a burn software to burn them to a DVD? You need to use a burn software to properly encode the footage so it'll play in any DVD player/computer/TV. So, once the movie is copied to your hard drive, you can edit it in iMovie (may need a converter first to get it into a format iMovie can work with such as MPEG Streamclip); after you're done in iMovie, use iDVD if you have it or Roxio Toast to burn it to a DVD.
And for the OP: Regions are different depending on where the movie was made: the US, Europe, etc. The regions are set within DVD player - you insert a DVD and the player reads what region it originated in. Please note you can only change regions 5 x; after the 5th, that setting will remain and can't be changed again.

Broken firewire ports - boot problems - target mode help needed

HI there,
I have a 15" macbook pro from 2008 with core 2 duo cpu etc.
It has recently developed the problem of hanging during the boot process with a blue screen, taking around 5 minutes to get to the login screen.
Much research has led me to the solution of removing two files from the SYSTEM > LIBRARY > EXTENSIONS folder relating to the firewire bus (?) and this has solved the issues about booting. (IOFirewireIP.kext and IOFirewireFamily.kext)
(I put on a clean install of 10.6.3 and the screen stayed blue. Removing these two files in target mode fixed this problem.)
There is still a sleep problem though - i.e. the machine does not wake from manual sleep (Apple menu) or if the system sleeps after the time allocated in the energy saving preferences.
There are so many suggestions on the web, it's almost impossible to know what the correct course of action is.
Another strange thing is, is that I can boot into target mode and access the drive via the firewire (400) port from another mac.
If the port were truly broken, how come it still works in target mode?
Is it possible that the firewire interface is not broken, but disabling these two files above could eliminate another associated problem?
Also, is there an online resource, or walkthrough, to eliminate what could be causing the sleep problems?
I would appreciate someone's suggestions on this and thank you for your help in advance!
Best wishes,
Torbz

Strangely, after installing a clean 10.6.3 - I've updated to 10.6.8 and the firewire ports are suddenly back and being reported in system profiler (whereby they were not before).
The two files I deleted above have been re-instated through the updates - and all seems well.
I've yet to check the sleep mode problem - but the firewire has at least sorted itself out...
That's a bonus!
Torbz

Issue Using both Firewire Ports on 24" iMac

I just got a new 24" iMac with the 3.06 processor. I intend to use it with Pro Tools and other music making software. I have an audio interface that is firewire only and an external hard drive (where I store my audio files) that is both firewire and USB. The problem is that I when I use both firewire ports (800 and 400) at the same time, my Pro Tools starts acting up. And I found one post stating that this was a known issue with the 24". But that was back in May and I thought it would have been resolved by now. Anyway, when I use the USB port on my hard drive instead of the firewire, everything works. Also, on my 17" iMac PPC G5 everything works just fine on there, including using both firewire ports a the same time. Finally, I've got the latest updates on all devices involved. Has anyone experienced this problem or have any knowledge of it? Thanks in advance.

I've got a similar problem. I've got a WD external drive connected via FW800 and an Mbox pro 2 audio interface connected via FW400 to my 24" mid 2007 iMac. They both power on (the mbox gets it's power from the iMac) and are recognised by the iMac. However, the WD drive seems to take dominance at some point during start up. The reason I know this is because I was watching the LED on the Mbox light up as I sent it signal from the guitar and then it suddenly stopped lighting up. I tried daisy chaining the mbox to the WD but outcome was the same. Then tried chaining the WD drive to the Mbox (this meant the WD drive was now down to FW400 speed). It worked!!!.............until the next time I started up the computer. The WD drive wasn't recognised by the iMac.
I'm not impressed with the iMac's inability to deal with devices from both it's ports. Why put them on the machine if they can't handle it?
I bought the WD drive to work at FW800 speed and don't want to have to submit to USB 2.0 if I can help it.
Any suggestions welcome.
Thanks

No firewire port on an iMac ?!

I ordered a brand new iMac, and I discovered lately that there is not a Firewire port on it ! How can I do to transfer the contains of my hard disk on my new computer ? The hard disk has only firewire port. The contains of Time Machine is in this HD. How can I do ? Thanks

Very simple, you need a Thunderbolt to Firewire adapter. The adapter in the US online store is:
http://store.apple.com/us/product/MD464ZM/A/apple-thunderbolt-to-firewire-adapte r?fnode=51

Need help troubleshooting Kernel panics

Hi,
I have had two Kernel Panics in two days just now, and another one a few weeks ago. The logs don't help me as I am not familiar with the wording on the Mac side, and I cannot submit the error reports to Apple as it fails, probably because I run 10.5.8 and Apple discontinued suppoort for Leopard or something like that. I would need help trying to figure out from the error message whether it is likely hardware, software, network, etc.
Here are the tope lines of the recent Kernel panic logs:
Thu May 3 10:23:12 2012
panic(cpu 1 caller 0x001AB0FE): Kernel trap at 0x00000000, type 14=page fault, registers:
CR0: 0x8001003b, CR2: 0x00000000, CR3: 0x010a8000, CR4: 0x00000660
EAX: 0x06b21480, EBX: 0x00001000, ECX: 0x00000000, EDX: 0x06c63b80
CR2: 0x00000000, EBP: 0x21d5bdb8, ESI: 0x00000000, EDI: 0x03112d80
EFL: 0x00010202, EIP: 0x00000000, CS: 0x00000008, DS: 0x00000010
Error code: 0x00000010
Backtrace (CPU 1), Frame : Return Address (4 potential args on stack)
0x21d5bb68 : 0x12b4c6 (0x45f91c 0x21d5bb9c 0x13355c 0x0)
0x21d5bbb8 : 0x1ab0fe (0x469a98 0x0 0xe 0x469248)
0x21d5bc98 : 0x1a1713 (0x21d5bcb0 0x1cda6e60 0x21d5bdb8 0x0)
0x21d5bca8 : 0x0 (0xe 0x48 0x707a0010 0x1cda0010)
0x21d5bdb8 : 0x7f78c6 (0x2c7d300 0x3112d80 0x0 0x1000)
0x21d5bde8 : 0xc9df27 (0x21d5be34 0x0 0x1000 0x0)
0x21d5be58 : 0xca37e1 (0x2b8c800 0x2a54d00 0x2b95500 0x0)
0x21d5be98 : 0xca28ba (0x2b62500 0x2a54d00 0x33606d1f 0x2b91a14)
0x21d5beb8 : 0xbf5c6a (0x2c06d00 0x2b95500 0x0 0x0)
0x21d5bef8 : 0xbf7332 (0x2b91a00 0x20 0x2b1c000 0x2b1c0dc)
0x21d5bf48 : 0xbf44d2 (0x2b91a00 0x2cc5500 0x1b2d6000 0x1)
0x21d5bf68 : 0x425d58 (0x2b97780 0x2b1cf20 0x21d5bf98 0x136efd)
0x21d5bf98 : 0x425a3a (0x2b97980 0x3184f00 0x46d46b0 0xa129b2)
0x21d5bfc8 : 0x1a14fc (0x2b97980 0x0 0x1a40b5 0x3d18208)
Backtrace terminated-invalid frame pointer 0
      Kernel loadable modules in backtrace (with dependencies):
         com.apple.iokit.IOAHCIBlockStorage(1.2.2)@0xc9b000->0xcacfff
            dependency: com.apple.iokit.IOAHCIFamily(1.5.0)@0xbeb000
            dependency: com.apple.iokit.IOStorageFamily(1.5.6)@0x7e6000
         com.apple.driver.AppleAHCIPort(1.7.0)@0xbf1000->0xbfcfff
            dependency: com.apple.iokit.IOPCIFamily(2.6)@0x5db000
            dependency: com.apple.iokit.IOAHCIFamily(1.5.0)@0xbeb000
         com.apple.iokit.IOStorageFamily(1.5.6)@0x7e6000->0x7fdfff
BSD process name corresponding to current thread: kernel_task
Wed May 2 13:25:06 2012
panic(cpu 0 caller 0x004312D7): "IOGMD: not wired for the IODMACommand"@/SourceCache/xnu/xnu-1228.15.4/iokit/Kernel/IOMemoryDescriptor.cp p:1311
Backtrace (CPU 0), Frame : Return Address (4 potential args on stack)
0x2318b9b8 : 0x12b4c6 (0x45f91c 0x2318b9ec 0x13355c 0x0)
0x2318ba08 : 0x4312d7 (0x4a5ab4 0x0 0xc00bb3 0x2)
0x2318ba88 : 0x42b7ba (0x3cdaf80 0x3 0x2b84800 0x80)
0x2318bb68 : 0x42bdee (0x2b81680 0x42b2aa 0x2a 0x2318bbb0)
0x2318bbd8 : 0x42c500 (0x2b81680 0x2a 0x2318bc88 0x142281)
0x2318bc18 : 0xbe9c6d (0x2b81680 0x0 0x0 0x1000)
0x2318bc88 : 0xbed5a3 (0x2b71200 0x2b81680 0x3cdaf80 0x1000)
0x2318bcf8 : 0xbe35ef (0x2b71200 0x2b81680 0x2318bd28 0x42963b)
0x2318bd38 : 0xbe3fea (0x2b71200 0x2b81680 0x0 0xc9d5b3)
0x2318bd68 : 0xc97e50 (0x2b86980 0x2c01880 0x0 0x1a9ad9)
0x2318bda8 : 0xc933cb (0x2b72800 0x2a4b790 0x2318bde8 0x7ed8c6)
0x2318bde8 : 0xc93f4e (0x2b72700 0x2a4b790 0x1000 0x0)
0x2318be58 : 0xc997e1 (0x2b72700 0x2a4a340 0x2b81680 0x0)
0x2318be98 : 0xc988ba (0x2b72800 0x2a4a340 0x2318beb8 0x2b7123c)
0x2318beb8 : 0xbebc6a (0x2bf5e00 0x2b81680 0x0 0x0)
0x2318bef8 : 0xbed332 (0x2b71200 0x8000 0x0 0x2b774f0)
    Backtrace continues...
      Kernel loadable modules in backtrace (with dependencies):
         com.apple.iokit.IOAHCIBlockStorage(1.2.2)@0xc91000->0xca2fff
            dependency: com.apple.iokit.IOAHCIFamily(1.5.0)@0xbe1000
            dependency: com.apple.iokit.IOStorageFamily(1.5.6)@0x7dc000
         com.apple.driver.AppleAHCIPort(1.7.0)@0xbe7000->0xbf2fff
            dependency: com.apple.iokit.IOPCIFamily(2.6)@0x5db000
            dependency: com.apple.iokit.IOAHCIFamily(1.5.0)@0xbe1000
         com.apple.iokit.IOAHCIFamily(1.5.0)@0xbe1000->0xbe6fff
BSD process name corresponding to current thread: kernel_task
Fri Apr 13 14:35:28 2012
panic(cpu 0 caller 0x001AB0FE): Kernel trap at 0x00040000, type 14=page fault, registers:
CR0: 0x8001003b, CR2: 0x00040000, CR3: 0x0109f000, CR4: 0x00000660
EAX: 0x0532c280, EBX: 0x00001000, ECX: 0x00000000, EDX: 0x055ef580
CR2: 0x00040000, EBP: 0x21663db8, ESI: 0x00000000, EDI: 0x02deacc0
EFL: 0x00010202, EIP: 0x00040000, CS: 0x00000008, DS: 0x00000010
Error code: 0x00000010
Backtrace (CPU 0), Frame : Return Address (4 potential args on stack)
0x21663b68 : 0x12b4c6 (0x45f91c 0x21663b9c 0x13355c 0x0)
0x21663bb8 : 0x1ab0fe (0x469a98 0x40000 0xe 0x469248)
0x21663c98 : 0x1a1713 (0x21663cb0 0x1cda7760 0x21663db8 0x40000)
0x21663ca8 : 0x40000 (0xe 0x48 0x3db0010 0x1cda0010)
0x21663db8 : 0x7ed8c6 (0x2c5c400 0x2deacc0 0x0 0x1000)
0x21663de8 : 0xc93f27 (0x21663e34 0x0 0x1000 0x0)
0x21663e58 : 0xc997e1 (0x2bc2b00 0x2ba16e8 0x2ba8b00 0x0)
0x21663e98 : 0xc988ba (0x2b66700 0x2ba16e8 0x0 0x2baee2c)
0x21663eb8 : 0xbebc6a (0x2bddb80 0x2ba8b00 0x0 0x0)
0x21663ef8 : 0xbed332 (0x2baee00 0x800 0x21663fc8 0x198fa3)
0x21663f48 : 0xbea4d2 (0x2baee00 0x0 0x0 0x450)
0x21663f68 : 0x425d58 (0x2badc80 0x0 0x0 0x0)
0x21663f98 : 0x425a3a (0x2bade80 0x0 0x21663fc8 0x126204)
0x21663fc8 : 0x1a14fc (0x2bade80 0x0 0x1a40b5 0x2c8b880)
Backtrace terminated-invalid frame pointer 0
      Kernel loadable modules in backtrace (with dependencies):
         com.apple.iokit.IOAHCIBlockStorage(1.2.2)@0xc91000->0xca2fff
            dependency: com.apple.iokit.IOAHCIFamily(1.5.0)@0xbe1000
            dependency: com.apple.iokit.IOStorageFamily(1.5.6)@0x7dc000
         com.apple.driver.AppleAHCIPort(1.7.0)@0xbe7000->0xbf2fff
            dependency: com.apple.iokit.IOPCIFamily(2.6)@0x5db000
            dependency: com.apple.iokit.IOAHCIFamily(1.5.0)@0xbe1000
         com.apple.iokit.IOStorageFamily(1.5.6)@0x7dc000->0x7f3fff
BSD process name corresponding to current thread: kernel_task
Thanks,
Vincent

Some additional information which might help:
MacBook, 2 GHz Intel Core 2 Duo, 1GB DDR2 SDRAM
The last two kernel panics happened just as I hit "send" in Thunderbird, so it may be related. I fail to understand how such a simple command would crash a computer though.

Need help troubleshooting a crashing iMac

[yay! my own new thread!]
About my iMac:
Intel Core 2 Duo, 3.06 GHz, 4 GB
What I've done so far:
1. Run disk utility - checked permissions, verified disk; nothing
2. Opened activity monitor - nothing out of the ordinary: 1.6 GB memory free, etc.
3. Opened console - not quite sure what to look for, but there are definitely a lot of files; apparently I don't have a lot of Pageouts
4. Booted in safe mode; Run disk utility. Sometimes I get an error that is apparently nothing to worry about.
5. At least once, I forgot I was still in Safemode and it crashed. At one point, expose crashed it while in safemode. I don't use expose often,
6. Checked system preferences nothing interesting in the 3rd party pref panes
7. Found files in
/private/var/run/StartupItems
/Library/StartupItems
/System/Library/StartupItems
/System/Library/LaunchDaemons
/Library/LaunchDaemons
- some are not apple related but I'm not sure if it's safe to delete
One thing to note / not sure what it means:
- all crashes are not created equal. Variations include:
a. spinning beachball
b. unresponsive windows (can move the cursor/mouse around but nothing responds)
c. gray screen after trying to restart
d. a mailbox that doesn't load properly/the bottom part is black with a band of distortion
- should I unplug *everything* and turn off iCloud on the iMac?
See what happens? [not tossing the machine off the cliff yet...]
Thank you everyone!
- Carolyn

Can't remember, really.
Now it just crashes a lot. in multiple ways.
A new one this morning: gray screen with the spinning wait thing....(previously just a blank gray screen).
I am starting to wonder if there are major sync issues - too many iOS / old Mobile me / iWorks->Pages / address / mail (including Outlook), too many hard drives attached / time machine, etc.
Things are a lot faster if I log in as a guest and not me.
How do I narrow down the search?

Kext causing kernel panic? Need help troubleshooting, please.

Hello all,
I'm a new face here and have been fortunate enough to never really need support, however at this point, I'm completely lost. First of all I want to apologize if my English is bad, Swedish is my native language.
My specs:
MBP 5,1 (late 2008) 15.4"
CPU: Intel Core 2 Duo 2,53 GHz
Memory: Apple native 4GB
Boot ROM Version: MBP51.007E.B05
System Version: Mac OS X 10.7.2 (11C74) Lion
Kernel Version: Darwin 11.2.0
SATA HDD: ST9250410AS Seagate Momentus 7200RPM 250GB
I have a very annoying problem that I dont know how to solve. When I try to boot my MBP normally I get kernel panic before getting to the login-screen. The kernel panic occurs 1-2 minutes into loading while the gray Apple-logo still is on screen.
Booting in safe mode works just fine (wifi, wired network and other critical os x functions works - While gfx-, audio-, spotlight-, etc. kexts are disabled). This problem occurred a few months ago while using the MBP normally (e.g. browsing the web). Since then I have done the following troubleshooting:
1. Switched to other HDD:s with both Snow Leopard-/Lion set-ups (fresh installs, same kernel panic)
2. Tried to reinstall from USB (same kernel panic)
3. Zapped PRAM
My thoughts: Some non-essential component in my MBP is malfunctioning, but since it works just fine in safe boot mode I figure that if I disable/remove the right kext(s) it should boot up fine in normal mode as well? (without the functionality of the component(s) that is disabled)
Im having a hard time to localize the origin of the error since I dont have any experience of interpreting Mac kernel logs.
Maybe you guys have any answers? Ill be eternally thankful for any thought, advice och help I can get!
I have recorded logs from two different crashes:
Kernel panic #1
Picture of KP1:
https://docs.google.com/open?id=0B39rsOfWshQEODM3OGJkNzEtODMyNy00OTM0LTgxNmItNzQ xZDkxMzdiMWQ3
All Message Log:
2011-11-28 11:44:58,000 bootlog: BOOT_TIME 1322477098 0
2011-11-28 11:45:05,000 kernel: Darwin Kernel Version 11.2.0: Tue Aug 9 20:54:00 PDT 2011; root:xnu-1699.24.8~1/RELEASE_X86_64
2011-11-28 11:45:05,000 kernel: vm_page_bootstrap: 942082 free pages and 32766 wired pages
2011-11-28 11:45:05,000 kernel: kext submap [0xffffff7f8072e000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff800072e000]
2011-11-28 11:45:05,000 kernel: zone leak detection enabled
2011-11-28 11:45:05,000 kernel: standard timeslicing quantum is 10000 us
2011-11-28 11:45:05,000 kernel: mig_table_max_displ = 73
2011-11-28 11:45:05,000 kernel: AppleACPICPU: ProcessorId=0 LocalApicId=0 Enabled
2011-11-28 11:45:05,000 kernel: AppleACPICPU: ProcessorId=1 LocalApicId=1 Enabled
2011-11-28 11:45:05,000 kernel: calling mpo_policy_init for TMSafetyNet
2011-11-28 11:45:05,000 kernel: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
2011-11-28 11:45:05,000 kernel: calling mpo_policy_init for Sandbox
2011-11-28 11:45:05,000 kernel: Security policy loaded: Seatbelt sandbox policy (Sandbox)
2011-11-28 11:45:05,000 kernel: calling mpo_policy_init for Quarantine
2011-11-28 11:45:05,000 kernel: Security policy loaded: Quarantine policy (Quarantine)
2011-11-28 11:45:05,000 kernel: Copyright (c) 1982, 1986, 1989, 1991, 1993
2011-11-28 11:45:05,000 kernel: The Regents of the University of California. All rights reserved.
2011-11-28 11:45:05,000 kernel: MAC Framework successfully initialized
2011-11-28 11:45:05,000 kernel: using 16384 buffer headers and 10240 cluster IO buffer headers
2011-11-28 11:45:05,000 kernel: IOAPIC: Version 0x11 Vectors 64:87
2011-11-28 11:45:05,000 kernel: ACPI: System State [S0 S3 S4 S5] (S3)
2011-11-28 11:45:05,000 kernel: PFM64 (36 cpu) 0xf10000000, 0xf0000000
2011-11-28 11:45:05,000 kernel: [ PCI configuration begin ]
2011-11-28 11:45:05,000 kernel: console relocated to 0xf20010000
2011-11-28 11:45:05,000 kernel: PCI configuration changed (bridge=6 device=3 cardbus=0)
2011-11-28 11:45:05,000 kernel: [ PCI configuration end, bridges 7 devices 19 ]
2011-11-28 11:45:05,000 kernel: AppleIntelCPUPowerManagement: (built 21:08:10 Aug 9 2011) initialization complete
2011-11-28 11:45:05,000 kernel: FireWire (OHCI) Lucent ID 5901 built-in now active, GUID 002332fffed252a2; max speed s800.
2011-11-28 11:45:05,000 kernel: [IOBluetoothHCIController::setConfigState] calling registerService
2011-11-28 11:45:05,000 kernel: ERROR: FireWire unable to determine security-mode; defaulting to full-secure.
2011-11-28 11:45:05,000 kernel: mbinit: done [64 MB total pool size, (42/21) split]
2011-11-28 11:45:05,000 kernel: Pthread support ABORTS when sync kernel primitives misused
2011-11-28 11:45:05,000 kernel: com.apple.AppleFSCompressionTypeZlib kmod start
2011-11-28 11:45:05,000 kernel: com.apple.AppleFSCompressionTypeDataless kmod start
2011-11-28 11:45:05,000 kernel: com.apple.AppleFSCompressionTypeZlib load succeeded
2011-11-28 11:45:05,000 kernel: com.apple.AppleFSCompressionTypeDataless load succeeded
2011-11-28 11:45:05,000 kernel: AppleIntelCPUPowerManagementClient: ready
2011-11-28 11:45:05,000 kernel: BTCOEXIST off
2011-11-28 11:45:05,000 kernel: wl0: Broadcom BCM432b 802.11 Wireless Controller
2011-11-28 11:45:05,000 kernel: 5.100.98.75
2011-11-28 11:45:05,000 kernel: rooting via boot-uuid from /chosen: B431148B-03FB-3BC2-BB3E-7BCA2BEB0A29
2011-11-28 11:45:05,000 kernel: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
2011-11-28 11:45:05,000 kernel: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@B/AppleMCP79AHCI/PR T0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOBlockStorageD river/ST9250410AS Media/IOGUIDPartitionScheme/LION@2
2011-11-28 11:45:05,000 kernel: BSD root: disk0s2, major 14, minor 2
2011-11-28 11:45:05,000 kernel: Kernel is LP64
2011-11-28 11:45:00,020 com.apple.launchd: *** launchd[1] has started up. ***
2011-11-28 11:45:07,000 kernel: NVEthernet: Ethernet address 00:23:32:d2:52:a2
2011-11-28 11:45:07,000 kernel: AirPort_Brcm4331: Ethernet address 00:23:6c:8c:fe:f0
2011-11-28 11:45:07,000 kernel: IO80211Controller::dataLinkLayerAttachComplete(): adding AppleEFINVRAM notification
2011-11-28 11:45:08,992 com.apple.launchd: (com.cisco.anyconnect.vpnagentd[54]) posix_spawn("/opt/cisco/vpn/bin/vpnagentd", ...): No such file or directory
2011-11-28 11:45:08,992 com.apple.launchd: (com.cisco.anyconnect.vpnagentd[54]) Exited with code: 1
2011-11-28 11:45:08,992 com.apple.launchd: (com.cisco.anyconnect.vpnagentd) Throttling respawn: Will start in 10 seconds
2011-11-28 11:45:10,182 com.apple.ucupdate.plist: ucupdate: Checked 1 update, no match found.
2011-11-28 11:45:10,313 com.apple.pfctl: No ALTQ support in kernel
2011-11-28 11:45:10,313 com.apple.pfctl: ALTQ related functions disabled
2011-11-28 11:45:10,542 com.apple.SecurityServer: Session 100000 created
2011-11-28 11:45:11,000 kernel: macx_swapon SUCCESS
2011-11-28 11:45:11,071 com.apple.DumpPanic: 2011-11-28 11:45:10.809 DumpPanic[46:4303] Error getting a reference to IODeviceTree:/options
2011-11-28 11:45:11,073 com.apple.launchd: (com.apple.DumpPanic[46]) Exited with code: 1
2011-11-28 11:45:13,000 kernel: Waiting for DSMOS...
2011-11-28 11:45:13,399 UserEventAgent: starting CaptiveNetworkSupport as SystemEventAgent built Jun 13 2011 17:29:21
2011-11-28 11:45:13,404 UserEventAgent: CaptiveNetworkSupport:CreateInterfaceWatchList:2788 WiFi Devices Found.
2011-11-28 11:45:13,404 UserEventAgent: CaptiveNetworkSupport:CaptivePublishState:1211 en1 - PreProbe
2011-11-28 11:45:13,408 UserEventAgent: CaptiveNetworkSupport:CaptiveSCRebuildCache:81 Failed to get service order
2011-11-28 11:45:13,408 UserEventAgent: CaptiveNetworkSupport:CaptiveSCRebuildCache:81 Failed to get service order
2011-11-28 11:45:13,408 UserEventAgent: CaptiveNetworkSupport:CaptivePublishState:1211 en1 - PreProbe
2011-11-28 11:45:13,409 UserEventAgent: CaptiveNetworkSupport:CaptiveSCRebuildCache:81 Failed to get service order
2011-11-28 11:45:13,409 UserEventAgent: CaptiveNetworkSupport:CaptiveSCRebuildCache:81 Failed to get service order
2011-11-28 11:45:13,552 UserEventAgent: CertsKeychainMonitor: configuring
kernel.log:
Nov 28 11:45:05 localhost kernel[0]: Darwin Kernel Version 11.2.0: Tue Aug 9 20:54:00 PDT 2011; root:xnu-1699.24.8~1/RELEASE_X86_64
Nov 28 11:45:05 localhost kernel[0]: vm_page_bootstrap: 942082 free pages and 32766 wired pages
Nov 28 11:45:05 localhost kernel[0]: kext submap [0xffffff7f8072e000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff800072e000]
Nov 28 11:45:05 localhost kernel[0]: zone leak detection enabled
Nov 28 11:45:05 localhost kernel[0]: standard timeslicing quantum is 10000 us
Nov 28 11:45:05 localhost kernel[0]: mig_table_max_displ = 73
Nov 28 11:45:05 localhost kernel[0]: AppleACPICPU: ProcessorId=0 LocalApicId=0 Enabled
Nov 28 11:45:05 localhost kernel[0]: AppleACPICPU: ProcessorId=1 LocalApicId=1 Enabled
Nov 28 11:45:05 localhost kernel[0]: calling mpo_policy_init for TMSafetyNet
Nov 28 11:45:05 localhost kernel[0]: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
Nov 28 11:45:05 localhost kernel[0]: calling mpo_policy_init for Sandbox
Nov 28 11:45:05 localhost kernel[0]: Security policy loaded: Seatbelt sandbox policy (Sandbox)
Nov 28 11:45:05 localhost kernel[0]: calling mpo_policy_init for Quarantine
Nov 28 11:45:05 localhost kernel[0]: Security policy loaded: Quarantine policy (Quarantine)
Nov 28 11:45:05 localhost kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
Nov 28 11:45:05 localhost kernel[0]: The Regents of the University of California. All rights reserved.
Nov 28 11:45:05 localhost kernel[0]: MAC Framework successfully initialized
Nov 28 11:45:05 localhost kernel[0]: using 16384 buffer headers and 10240 cluster IO buffer headers
Nov 28 11:45:05 localhost kernel[0]: IOAPIC: Version 0x11 Vectors 64:87
Nov 28 11:45:05 localhost kernel[0]: ACPI: System State [S0 S3 S4 S5] (S3)
Nov 28 11:45:05 localhost kernel[0]: PFM64 (36 cpu) 0xf10000000, 0xf0000000
Nov 28 11:45:05 localhost kernel[0]: [ PCI configuration begin ]
Nov 28 11:45:05 localhost kernel[0]: console relocated to 0xf20010000
Nov 28 11:45:05 localhost kernel[0]: PCI configuration changed (bridge=6 device=3 cardbus=0)
Nov 28 11:45:05 localhost kernel[0]: [ PCI configuration end, bridges 7 devices 19 ]
Nov 28 11:45:05 localhost kernel[0]: AppleIntelCPUPowerManagement: (built 21:08:10 Aug 9 2011) initialization complete
Nov 28 11:45:05 localhost kernel[0]: FireWire (OHCI) Lucent ID 5901 built-in now active, GUID 002332fffed252a2; max speed s800.
Nov 28 11:45:05 localhost kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
Nov 28 11:45:05 localhost kernel[0]: ERROR: FireWire unable to determine security-mode; defaulting to full-secure.
Nov 28 11:45:05 localhost kernel[0]: mbinit: done [64 MB total pool size, (42/21) split]
Nov 28 11:45:05 localhost kernel[0]: Pthread support ABORTS when sync kernel primitives misused
Nov 28 11:45:05 localhost kernel[0]: com.apple.AppleFSCompressionTypeZlib kmod start
Nov 28 11:45:05 localhost kernel[0]: com.apple.AppleFSCompressionTypeDataless kmod start
Nov 28 11:45:05 localhost kernel[0]: com.apple.AppleFSCompressionTypeZlib load succeeded
Nov 28 11:45:05 localhost kernel[0]: com.apple.AppleFSCompressionTypeDataless load succeeded
Nov 28 11:45:05 localhost kernel[0]: AppleIntelCPUPowerManagementClient: ready
Nov 28 11:45:05 localhost kernel[0]: BTCOEXIST off
Nov 28 11:45:05 localhost kernel[0]: wl0: Broadcom BCM432b 802.11 Wireless Controller
Nov 28 11:45:05 localhost kernel[0]: 5.100.98.75
Nov 28 11:45:05 localhost kernel[0]: rooting via boot-uuid from /chosen: B431148B-03FB-3BC2-BB3E-7BCA2BEB0A29
Nov 28 11:45:05 localhost kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
Nov 28 11:45:05 localhost kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@B/AppleMCP79AHCI/PR T0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOBlockStorageD river/ST9250410AS Media/IOGUIDPartitionScheme/LION@2
Nov 28 11:45:05 localhost kernel[0]: BSD root: disk0s2, major 14, minor 2
Nov 28 11:45:05 localhost kernel[0]: Kernel is LP64
Nov 28 11:45:07 localhost kernel[0]: NVEthernet: Ethernet address 00:23:32:d2:52:a2
Nov 28 11:45:07 localhost kernel[0]: AirPort_Brcm4331: Ethernet address 00:23:6c:8c:fe:f0
Nov 28 11:45:07 localhost kernel[0]: IO80211Controller::dataLinkLayerAttachComplete(): adding AppleEFINVRAM notification
Nov 28 11:45:11 localhost kernel[0]: macx_swapon SUCCESS
Nov 28 11:45:13 localhost kernel[0]: Waiting for DSMOS...
system.log:
Nov 28 11:44:58 localhost bootlog[0]: BOOT_TIME 1322477098 0
Nov 28 11:45:00 localhost com.apple.launchd[1]: *** launchd[1] has started up. ***
Nov 28 11:45:08 localhost com.apple.launchd[1] (com.cisco.anyconnect.vpnagentd[54]): posix_spawn("/opt/cisco/vpn/bin/vpnagentd", ...): No such file or directory
Nov 28 11:45:08 localhost com.apple.launchd[1] (com.cisco.anyconnect.vpnagentd[54]): Exited with code: 1
Nov 28 11:45:08 localhost com.apple.launchd[1] (com.cisco.anyconnect.vpnagentd): Throttling respawn: Will start in 10 seconds
Nov 28 11:45:10 localhost com.apple.ucupdate.plist[24]: ucupdate: Checked 1 update, no match found.
Nov 28 11:45:10 localhost com.apple.pfctl[33]: No ALTQ support in kernel
Nov 28 11:45:10 localhost com.apple.pfctl[33]: ALTQ related functions disabled
Nov 28 11:45:11 localhost DumpPanic[46]: Error getting a reference to IODeviceTree:/options
Nov 28 11:45:11 localhost com.apple.DumpPanic[46]: 2011-11-28 11:45:10.809 DumpPanic[46:4303] Error getting a reference to IODeviceTree:/options
Nov 28 11:45:11 localhost com.apple.launchd[1] (com.apple.DumpPanic[46]): Exited with code: 1
Nov 28 11:45:13 localhost UserEventAgent[11]: starting CaptiveNetworkSupport as SystemEventAgent built Jun 13 2011 17:29:21
Nov 28 11:45:13 localhost UserEventAgent[11]: CaptiveNetworkSupport:CreateInterfaceWatchList:2788 WiFi Devices Found.
Nov 28 11:45:13 localhost UserEventAgent[11]: CaptiveNetworkSupport:CaptivePublishState:1211 en1 - PreProbe
Nov 28 11:45:13 localhost UserEventAgent[11]: CaptiveNetworkSupport:CaptiveSCRebuildCache:81 Failed to get service order
Nov 28 11:45:13: --- last message repeated 1 time ---
Nov 28 11:45:13 localhost UserEventAgent[11]: CaptiveNetworkSupport:CaptivePublishState:1211 en1 - PreProbe
Nov 28 11:45:13 localhost UserEventAgent[11]: CaptiveNetworkSupport:CaptiveSCRebuildCache:81 Failed to get service order
Nov 28 11:45:13: --- last message repeated 1 time ---
Nov 28 11:45:13 localhost UserEventAgent[11]: CertsKeychainMonitor: configuring
Kernel panic #2
Picture of KP2:
https://docs.google.com/open?id=0B39rsOfWshQEMGFhZmRlNmMtNGU5YS00ODMzLWExMWEtOGI zNWQ4YThhOGFm
All Message Log:
2011-11-28 11:48:42,000 bootlog: BOOT_TIME 1322477322 0
2011-11-28 11:48:51,000 kernel: Darwin Kernel Version 11.2.0: Tue Aug 9 20:54:00 PDT 2011; root:xnu-1699.24.8~1/RELEASE_X86_64
2011-11-28 11:48:51,000 kernel: vm_page_bootstrap: 942082 free pages and 32766 wired pages
2011-11-28 11:48:51,000 kernel: kext submap [0xffffff7f8072e000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff800072e000]
2011-11-28 11:48:51,000 kernel: zone leak detection enabled
2011-11-28 11:48:51,000 kernel: standard timeslicing quantum is 10000 us
2011-11-28 11:48:51,000 kernel: mig_table_max_displ = 73
2011-11-28 11:48:51,000 kernel: AppleACPICPU: ProcessorId=0 LocalApicId=0 Enabled
2011-11-28 11:48:51,000 kernel: AppleACPICPU: ProcessorId=1 LocalApicId=1 Enabled
2011-11-28 11:48:51,000 kernel: calling mpo_policy_init for TMSafetyNet
2011-11-28 11:48:51,000 kernel: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
2011-11-28 11:48:51,000 kernel: calling mpo_policy_init for Sandbox
2011-11-28 11:48:51,000 kernel: Security policy loaded: Seatbelt sandbox policy (Sandbox)
2011-11-28 11:48:51,000 kernel: calling mpo_policy_init for Quarantine
2011-11-28 11:48:51,000 kernel: Security policy loaded: Quarantine policy (Quarantine)
2011-11-28 11:48:51,000 kernel: Copyright (c) 1982, 1986, 1989, 1991, 1993
2011-11-28 11:48:51,000 kernel: The Regents of the University of California. All rights reserved.
2011-11-28 11:48:51,000 kernel: MAC Framework successfully initialized
2011-11-28 11:48:51,000 kernel: using 16384 buffer headers and 10240 cluster IO buffer headers
2011-11-28 11:48:51,000 kernel: IOAPIC: Version 0x11 Vectors 64:87
2011-11-28 11:48:51,000 kernel: ACPI: System State [S0 S3 S4 S5] (S3)
2011-11-28 11:48:51,000 kernel: PFM64 (36 cpu) 0xf10000000, 0xf0000000
2011-11-28 11:48:51,000 kernel: [ PCI configuration begin ]
2011-11-28 11:48:51,000 kernel: console relocated to 0xf20010000
2011-11-28 11:48:51,000 kernel: PCI configuration changed (bridge=6 device=3 cardbus=0)
2011-11-28 11:48:51,000 kernel: [ PCI configuration end, bridges 7 devices 19 ]
2011-11-28 11:48:51,000 kernel: AppleIntelCPUPowerManagement: (built 21:08:10 Aug 9 2011) initialization complete
2011-11-28 11:48:51,000 kernel: FireWire (OHCI) Lucent ID 5901 built-in now active, GUID 002332fffed252a2; max speed s800.
2011-11-28 11:48:51,000 kernel: [IOBluetoothHCIController::setConfigState] calling registerService
2011-11-28 11:48:51,000 kernel: ERROR: FireWire unable to determine security-mode; defaulting to full-secure.
2011-11-28 11:48:51,000 kernel: mbinit: done [64 MB total pool size, (42/21) split]
2011-11-28 11:48:51,000 kernel: Pthread support ABORTS when sync kernel primitives misused
2011-11-28 11:48:51,000 kernel: com.apple.AppleFSCompressionTypeZlib kmod start
2011-11-28 11:48:51,000 kernel: com.apple.AppleFSCompressionTypeDataless kmod start
2011-11-28 11:48:51,000 kernel: com.apple.AppleFSCompressionTypeZlib load succeeded
2011-11-28 11:48:51,000 kernel: com.apple.AppleFSCompressionTypeDataless load succeeded
2011-11-28 11:48:51,000 kernel: AppleIntelCPUPowerManagementClient: ready
2011-11-28 11:48:51,000 kernel: BTCOEXIST off
2011-11-28 11:48:51,000 kernel: wl0: Broadcom BCM432b 802.11 Wireless Controller
2011-11-28 11:48:51,000 kernel: 5.100.98.75
2011-11-28 11:48:51,000 kernel: rooting via boot-uuid from /chosen: B431148B-03FB-3BC2-BB3E-7BCA2BEB0A29
2011-11-28 11:48:51,000 kernel: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
2011-11-28 11:48:51,000 kernel: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@B/AppleMCP79AHCI/PR T0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOBlockStorageD river/ST9250410AS Media/IOGUIDPartitionScheme/LION@2
2011-11-28 11:48:51,000 kernel: BSD root: disk0s2, major 14, minor 2
2011-11-28 11:48:51,000 kernel: jnl: unknown-dev: replay_journal: from: 5649408 to: 9708544 (joffset 0x747000)
2011-11-28 11:48:51,000 kernel: jnl: unknown-dev: journal replay done.
2011-11-28 11:48:51,000 kernel: Kernel is LP64
2011-11-28 11:48:51,000 kernel: hfs: Removed 0 orphaned / unlinked files and 6 directories
2011-11-28 11:48:46,376 com.apple.launchd: *** launchd[1] has started up. ***
2011-11-28 11:48:53,000 kernel: NVEthernet: Ethernet address 00:23:32:d2:52:a2
2011-11-28 11:48:53,000 kernel: AirPort_Brcm4331: Ethernet address 00:23:6c:8c:fe:f0
2011-11-28 11:48:53,000 kernel: IO80211Controller::dataLinkLayerAttachComplete(): adding AppleEFINVRAM notification
2011-11-28 11:48:55,119 com.apple.launchd: (com.cisco.anyconnect.vpnagentd[54]) posix_spawn("/opt/cisco/vpn/bin/vpnagentd", ...): No such file or directory
2011-11-28 11:48:55,120 com.apple.launchd: (com.cisco.anyconnect.vpnagentd[54]) Exited with code: 1
2011-11-28 11:48:55,120 com.apple.launchd: (com.cisco.anyconnect.vpnagentd) Throttling respawn: Will start in 10 seconds
2011-11-28 11:48:55,473 com.apple.pfctl: No ALTQ support in kernel
2011-11-28 11:48:55,473 com.apple.pfctl: ALTQ related functions disabled
2011-11-28 11:48:55,823 com.apple.ucupdate.plist: ucupdate: Checked 1 update, no match found.
2011-11-28 11:48:55,886 fseventsd: event logs in /.fseventsd out of sync with volume. destroying old logs. (171 12 336)
2011-11-28 11:48:56,589 fseventsd: log dir: /.fseventsd getting new uuid: 1259FC9A-89C4-463B-A803-827EF26804C1
2011-11-28 11:48:56,646 com.apple.DumpPanic: 2011-11-28 11:48:56.498 DumpPanic[46:4303] Error getting a reference to IODeviceTree:/options
2011-11-28 11:48:56,652 com.apple.launchd: (com.apple.DumpPanic[46]) Exited with code: 1
2011-11-28 11:48:57,000 kernel: macx_swapon SUCCESS
2011-11-28 11:48:57,026 com.apple.SecurityServer: Session 100000 created
2011-11-28 11:48:58,641 UserEventAgent: starting CaptiveNetworkSupport as SystemEventAgent built Jun 13 2011 17:29:21
2011-11-28 11:48:58,645 UserEventAgent: CaptiveNetworkSupport:CreateInterfaceWatchList:2788 WiFi Devices Found.
2011-11-28 11:48:58,645 UserEventAgent: CaptiveNetworkSupport:CaptivePublishState:1211 en1 - PreProbe
2011-11-28 11:48:58,645 UserEventAgent: CaptiveNetworkSupport:CaptiveSCRebuildCache:81 Failed to get service order
2011-11-28 11:48:58,645 UserEventAgent: CaptiveNetworkSupport:CaptiveSCRebuildCache:81 Failed to get service order
2011-11-28 11:48:58,645 UserEventAgent: CaptiveNetworkSupport:CaptivePublishState:1211 en1 - PreProbe
2011-11-28 11:48:58,646 UserEventAgent: CaptiveNetworkSupport:CaptiveSCRebuildCache:81 Failed to get service order
2011-11-28 11:48:58,646 UserEventAgent: CaptiveNetworkSupport:CaptiveSCRebuildCache:81 Failed to get service order
2011-11-28 11:48:58,971 UserEventAgent: CertsKeychainMonitor: configuring
2011-11-28 11:48:59,000 kernel: Waiting for DSMOS...
kernel.log:
Nov 28 11:48:51 localhost kernel[0]: Darwin Kernel Version 11.2.0: Tue Aug 9 20:54:00 PDT 2011; root:xnu-1699.24.8~1/RELEASE_X86_64
Nov 28 11:48:51 localhost kernel[0]: vm_page_bootstrap: 942082 free pages and 32766 wired pages
Nov 28 11:48:51 localhost kernel[0]: kext submap [0xffffff7f8072e000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff800072e000]
Nov 28 11:48:51 localhost kernel[0]: zone leak detection enabled
Nov 28 11:48:51 localhost kernel[0]: standard timeslicing quantum is 10000 us
Nov 28 11:48:51 localhost kernel[0]: mig_table_max_displ = 73
Nov 28 11:48:51 localhost kernel[0]: AppleACPICPU: ProcessorId=0 LocalApicId=0 Enabled
Nov 28 11:48:51 localhost kernel[0]: AppleACPICPU: ProcessorId=1 LocalApicId=1 Enabled
Nov 28 11:48:51 localhost kernel[0]: calling mpo_policy_init for TMSafetyNet
Nov 28 11:48:51 localhost kernel[0]: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
Nov 28 11:48:51 localhost kernel[0]: calling mpo_policy_init for Sandbox
Nov 28 11:48:51 localhost kernel[0]: Security policy loaded: Seatbelt sandbox policy (Sandbox)
Nov 28 11:48:51 localhost kernel[0]: calling mpo_policy_init for Quarantine
Nov 28 11:48:51 localhost kernel[0]: Security policy loaded: Quarantine policy (Quarantine)
Nov 28 11:48:51 localhost kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
Nov 28 11:48:51 localhost kernel[0]: The Regents of the University of California. All rights reserved.
Nov 28 11:48:51 localhost kernel[0]: MAC Framework successfully initialized
Nov 28 11:48:51 localhost kernel[0]: using 16384 buffer headers and 10240 cluster IO buffer headers
Nov 28 11:48:51 localhost kernel[0]: IOAPIC: Version 0x11 Vectors 64:87
Nov 28 11:48:51 localhost kernel[0]: ACPI: System State [S0 S3 S4 S5] (S3)
Nov 28 11:48:51 localhost kernel[0]: PFM64 (36 cpu) 0xf10000000, 0xf0000000
Nov 28 11:48:51 localhost kernel[0]: [ PCI configuration begin ]
Nov 28 11:48:51 localhost kernel[0]: console relocated to 0xf20010000
Nov 28 11:48:51 localhost kernel[0]: PCI configuration changed (bridge=6 device=3 cardbus=0)
Nov 28 11:48:51 localhost kernel[0]: [ PCI configuration end, bridges 7 devices 19 ]
Nov 28 11:48:51 localhost kernel[0]: AppleIntelCPUPowerManagement: (built 21:08:10 Aug 9 2011) initialization complete
Nov 28 11:48:51 localhost kernel[0]: FireWire (OHCI) Lucent ID 5901 built-in now active, GUID 002332fffed252a2; max speed s800.
Nov 28 11:48:51 localhost kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
Nov 28 11:48:51 localhost kernel[0]: ERROR: FireWire unable to determine security-mode; defaulting to full-secure.
Nov 28 11:48:51 localhost kernel[0]: mbinit: done [64 MB total pool size, (42/21) split]
Nov 28 11:48:51 localhost kernel[0]: Pthread support ABORTS when sync kernel primitives misused
Nov 28 11:48:51 localhost kernel[0]: com.apple.AppleFSCompressionTypeZlib kmod start
Nov 28 11:48:51 localhost kernel[0]: com.apple.AppleFSCompressionTypeDataless kmod start
Nov 28 11:48:51 localhost kernel[0]: com.apple.AppleFSCompressionTypeZlib load succeeded
Nov 28 11:48:51 localhost kernel[0]: com.apple.AppleFSCompressionTypeDataless load succeeded
Nov 28 11:48:51 localhost kernel[0]: AppleIntelCPUPowerManagementClient: ready
Nov 28 11:48:51 localhost kernel[0]: BTCOEXIST off
Nov 28 11:48:51 localhost kernel[0]: wl0: Broadcom BCM432b 802.11 Wireless Controller
Nov 28 11:48:51 localhost kernel[0]: 5.100.98.75
Nov 28 11:48:51 localhost kernel[0]: rooting via boot-uuid from /chosen: B431148B-03FB-3BC2-BB3E-7BCA2BEB0A29
Nov 28 11:48:51 localhost kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
Nov 28 11:48:51 localhost kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@B/AppleMCP79AHCI/PR T0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOBlockStorageD river/ST9250410AS Media/IOGUIDPartitionScheme/LION@2
Nov 28 11:48:51 localhost kernel[0]: BSD root: disk0s2, major 14, minor 2
Nov 28 11:48:51 localhost kernel[0]: jnl: unknown-dev: replay_journal: from: 5649408 to: 9708544 (joffset 0x747000)
Nov 28 11:48:51 localhost kernel[0]: jnl: unknown-dev: journal replay done.
Nov 28 11:48:51 localhost kernel[0]: Kernel is LP64
Nov 28 11:48:51 localhost kernel[0]: hfs: Removed 0 orphaned / unlinked files and 6 directories
Nov 28 11:48:53 localhost kernel[0]: NVEthernet: Ethernet address 00:23:32:d2:52:a2
Nov 28 11:48:53 localhost kernel[0]: AirPort_Brcm4331: Ethernet address 00:23:6c:8c:fe:f0
Nov 28 11:48:53 localhost kernel[0]: IO80211Controller::dataLinkLayerAttachComplete(): adding AppleEFINVRAM notification
Nov 28 11:48:57 localhost kernel[0]: macx_swapon SUCCESS
Nov 28 11:48:59 localhost kernel[0]: Waiting for DSMOS...
system.log:
Nov 28 11:48:42 localhost bootlog[0]: BOOT_TIME 1322477322 0
Nov 28 11:48:46 localhost com.apple.launchd[1]: *** launchd[1] has started up. ***
Nov 28 11:48:55 localhost com.apple.launchd[1] (com.cisco.anyconnect.vpnagentd[54]): posix_spawn("/opt/cisco/vpn/bin/vpnagentd", ...): No such file or directory
Nov 28 11:48:55 localhost com.apple.launchd[1] (com.cisco.anyconnect.vpnagentd[54]): Exited with code: 1
Nov 28 11:48:55 localhost com.apple.launchd[1] (com.cisco.anyconnect.vpnagentd): Throttling respawn: Will start in 10 seconds
Nov 28 11:48:55 localhost com.apple.pfctl[33]: No ALTQ support in kernel
Nov 28 11:48:55 localhost com.apple.pfctl[33]: ALTQ related functions disabled
Nov 28 11:48:55 localhost com.apple.ucupdate.plist[24]: ucupdate: Checked 1 update, no match found.
Nov 28 11:48:55 localhost fseventsd[43]: event logs in /.fseventsd out of sync with volume. destroying old logs. (171 12 336)
Nov 28 11:48:56 localhost fseventsd[43]: log dir: /.fseventsd getting new uuid: 1259FC9A-89C4-463B-A803-827EF26804C1
Nov 28 11:48:56 localhost DumpPanic[46]: Error getting a reference to IODeviceTree:/options
Nov 28 11:48:56 localhost com.apple.DumpPanic[46]: 2011-11-28 11:48:56.498 DumpPanic[46:4303] Error getting a reference to IODeviceTree:/options
Nov 28 11:48:56 localhost com.apple.launchd[1] (com.apple.DumpPanic[46]): Exited with code: 1
Nov 28 11:48:58 localhost UserEventAgent[11]: starting CaptiveNetworkSupport as SystemEventAgent built Jun 13 2011 17:29:21
Nov 28 11:48:58 localhost UserEventAgent[11]: CaptiveNetworkSupport:CreateInterfaceWatchList:2788 WiFi Devices Found.
Nov 28 11:48:58 localhost UserEventAgent[11]: CaptiveNetworkSupport:CaptivePublishState:1211 en1 - PreProbe
Nov 28 11:48:58 localhost UserEventAgent[11]: CaptiveNetworkSupport:CaptiveSCRebuildCache:81 Failed to get service order
Nov 28 11:48:58: --- last message repeated 1 time ---
Nov 28 11:48:58 localhost UserEventAgent[11]: CaptiveNetworkSupport:CaptivePublishState:1211 en1 - PreProbe
Nov 28 11:48:58 localhost UserEventAgent[11]: CaptiveNetworkSupport:CaptiveSCRebuildCache:81 Failed to get service order
Nov 28 11:48:58: --- last message repeated 1 time ---
Nov 28 11:48:58 localhost UserEventAgent[11]: CertsKeychainMonitor: configuring

Thank you for your quick reply!
However I cant manage to find the panic logs in the library/logs/ or any of its directorys. Ive looked for this logs before and my guess is that they dont get created if the panic occurs during boot.

I need help troubleshooting computers not showing up on network

seriously, everything was fine until xmas eve. Now I can't see the computers on the network on a mac or a pc.
Now, when I go to Start/My Network places on a pc the share points do not show up.
Also when I go View Workgroup Computers - it returns an error. In the error it mentions permissions. I've propogated permission, restarted SMB services and restarted twice.
OSX 10.5.1, Xserve, standalone server, SMB services are running, one username and password for everyone with r/w permission, even guests access is turned on, ...
AT&T Netopia dsl modem (bridged mode), Linksys wireless router with ip's assigned to all computers, to a switch that routes to users and two more switches.
note - I can see a few macs on Mac OSX Tiger and Leopard but nothing on the pc's. I can, however, see a unix sever that's on the network by typing \\ServerName in an explore address bar. And at one time I could type in \\Xserve on both macs and pc's but no longer.
Thanks,
ctrent

Any relationship to what works and what doesn't?
no
Could there be a bad cable or bad switch port?
I've thought about that - checked and rechecked
Do you know how to see if there are two momputers with the same ip connected to a network?
Tried swapping a working and a non-working box to see if it's the connection that's stuffed?
no
but I just did
I tested an imac using the same connection. It was able to browse the entire network.
I noticed that MacBookPro had tld-internal.com in the Search Domains entry box.
I entered TLDMacserver.com as the search domain and was able to browse the server share points and read and write. (hoorah!)
I think that this is where the problem is - Is there a domain that needs to be set up or is already setup? I don't know of a setting on pc's to Search Domains - is this just a mac thing?
Now, seeing the other computers is the issue. I can only browse 4 macs and the Xserver on a mac but nothing on the pc's.
Is there something in the Advanced TCP/IP Settings that I should know about?
My server name on the left panel in Server Admin is TLDMacserver-com.local.
Under Settings/Network the computer name is TLDMacserver-com
Computer Name - TLDMacserver.com
Local Hostname TELDMacserver-com
Network Interfaces: Ethernet 1
IPv4
192.168.0.32
DNS Name: TLDMacserver-com.local
Anything interesting in the SMB-related server log files on the Mac OS X Server box?I'm not really sure what to look for.
That's one of those cases where digging through the logs looks for oddities.
I would probably have as much luck digging for gold.
Also, probably related to my problem - my logmein.com remote conrol no longer works. I tried deleting the machine from my list and reinstalling Logmein on the server, but it won't install.
It says:
Istaller is damged
Installer is unable to open the package.
This is likely due to install framework's runner executable not having he proper ownersip &/or persmissions.
Definitely seems that something got stomped on. Mayhap the disk?
What's the state of your data archives?
for those machines that can browse it's working fine.
Your backups current?
yes. A firewire drive that's swapped out. They both are backing up right.
Next step would be to boot the installer DVD and verify the disk and verify the disk protections.
it's just a download file from LogMeIn.com
As soon as it downloads that error pops up and when I manually try to run the .pkg the error occurs.
Up until now I've been able to log in just fine from anywhere.

Need help troubleshooting officejet4630 printing problem

I cannot print from my officejet 4630. I encountered the problem a few days ago and I have been working tirelessly to get this up and running again. The problem first started with my desktop, and the following day I was unable to print with my laptop.
In the laptop:
I have uninstalled and re-installed, I have downloaded print dr. and documents seemed to print sporadically, a half hour after I sent them to the queue.
in the desktop:
I have uninstalled, and I am unable to reinstall. It seems to get stuck at the network check. Ok, so I unplugged my router to see if connectivity was the problem. It's fine. I was able to get signal back to my desktop and my printer quickly. The signal is strong in both devices at all times (mine is the only computer in the house). So what the heck is going on? I've troubleshooted and I arriving at no clear answer. I'm reaching the end of my rope trying to figure this out, please help asap.

Hey @mhubbard,
Welcome to the HP Support Forums!
I would like to work with you today with resolving the network communication and printing issues you're experiencing with your HP Officejet 4630 e-All-in-One Printer. I understand that this issue is affecting both your laptop and your desktop. You have also ran the Print and Scan Doctor tools, uninstalled and reinstalled, and powercycled your router to no avail. It is important to note that even though your signal strength for your network is great there is still a chance that your router could be blocking some communication to a printer.
Just so you are aware, when you network a printer there really is no grey area, the printer either works or it doesn't. If the printer doesn't work at all on a network than you may have a defective network card. However, if the printer connects to the network, even if it's an intermittent connection (slow printing, no communication, etc . . . ), it proves that the network card is functioning. Sometimes routers deem the printer as a threat trying to access the network and end up blocking some or all features of the printers network communication. This isn't something that is wrong with the router, it's just doing its job too well.
Now with that being said, I'm going to take you through some troubleshooting steps to get this product up and running consistently for you. Please run through the step-by-step troubleshooting steps below.
Step 1: Powercycle the Network:
I know you have already tried this, but there is a special way this should be done. If you haven't already please run the steps below.
1.First, unplug the power cable to your Router
2.Once your Router is unplugged, turn off your printer
3.Next, shut down your computer
4.After 30 seconds to 1 minutes, plug your Router back in
5.Next, turn on your printer
6.Turn on the computer
After a few moments the internet connection will reestablish itself. Check the internet on your computer and ensure it is working before proceeding.
Step 2: Reset the Winsock:
Please run the following steps on your Desktop computer.
The Network Installation Hangs on the 'Checking Network Environment' Screen
Step 3: Printer Doesn't Maintain Wireless Connection:
Printer Does Not Maintain Wireless Connection
Should the steps in this document fail to resolve your issue than proceed to the next step.
Step 4: Open Router Ports:
There are certain ports on a router that allow wireless communication with the printer for printing and scanning. If you're not sure how to open these ports yourself, please contact the manufacturer of your router to do this for you.
Open: Incoming (UDP) Ports:
137, 138, 161, 427
Open: Outgoing (TCP) Ports:
137, 139, 427, 9100, 9220, 9500
Also, on the router ensure that:
Mac Filtering should be OFF
Firmware updated
Firewall may need to be 'off' for testing
Please let me know if the steps I've provided resolve your wireless communication and printing issues. Good luck!
X-23
I work on behalf of HP
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

Need Help Troubleshooting MacBook Wireless

Hello,
I have looked on this forum and other forums about why the wireless is so noticeably slow.
We have an iBook 700 mhz. and now a new macbook 2GB Ram and 2.0 ghz and it is slower on surfing the web than the iBook.
I have read that it might be the intel chip inside, cordless phones or the settings. However, I need to know what steps I can take to find out the real problem.
I have the wireless connection showing a 55 signal strength and no noise with iStumbler. Are there any troubleshooting steps I can follow to get down to the bottom of the problem?
This is my wife's new computer and she is quite disappointed as I am too. We thought this would be much faster. Seems like it should be.
We are running 10.4.7 and my wireless access point is a Belkin F5D6130. Unfortunately, I was given the wireless modem second hand so I have no way of modifying the settings. It worked fine on our iBook without any changes.
Thanks,
Randal

Hello,
I talked with Apple today and they had me run a test on my iBook for connection speed and the same thing on the MacBook. My MacBook was 1/2 the iBook speed. The had me bring up http://www.2wire.com and the speed test is in the upper right corner.
They said it could be the card or my Belkin wireless modem. Therefore, I went to a neighbor that had a wireless signal and the system went to the same as the iBook speed at his house.
Therefore, it appears I will need a new wireless modem/router.
Hope this may help someone else.
Randal

Need help troubleshooting poor performance loading cubes

I need ideas on how to troubleshoot performance issues we are having when loading our infocube. There are eight infopackages running in parallel to update the cube. Each infopackage can execute three datapackages at a time. The load performance is erractic. For example, if an infopackage needs five datapackages to load the data, data package 1 is sometimes the last one to complete. Sometimes the slow performance is in the Update Rules processing and other times it is on the Insert into the fact table.
Sometimes there are no performance problems and the load completes in 20 mins. Other times, the loads complete in 1.5+ hours.
Does anyone know how to tell which server a data package was executed on? Can someone tell me any transactions to use to monitor the loads while they are running to help pinpoint what the bottleneck is?
Thanks.
Regards,
Ryan

Some sugegstions:
1. Collect BW statistics for all the cubes. Goto RSA1 and go to the cube and on tool bar - tools - BW statistics. Check thed boxes to collect both OLAP and WHM.
2. Activate all the technical content cubes and reports and relevant objects. You will find them if you search with 0BWTC* in the business content.
3. Start loading data to the Technical content cubes.
4. There are a few reports out of these statistical cubes and run them and you will get some ideas.
5. Try to schedule sequentially instead of parallel loads.
Ravi Thothadri

Need help troubleshooting Report Query/BI Publisher

Hi All --
I need some help with an odd issue I'm having with a report query and BI Publisher. The users run this report by inputting a date range, usually by week. Oddly enough, if we input a date range of 06/01/2008 through 06/07/2008, the report runs and BI Publisher renders the document correctly, but if we input a date range of 06/08/2008 through 06/14/2008, the report shows correctly on the screen, but BI Publisher returns an empty document. I thought perhaps it was an issue with the data, but inputting the date range of 06/01/2008 through 06/14/2008 works correctly and the document is rendered with all the data as shown in the report.
I'm really at a loss and don't know how to proceed in troubleshooting the issue. Does anyone know of any log files or anything else to look at to try and figure out why the report isn't being rendered correctly for that one week?
Thanks!
Leigh Johnson

Thanks Marc --
The OC4J logs don't show any errors at the time I tried running the report. I did change the output format to XML and saved it for the date range that doesn't work as well as a date range that does work. As foar as I can tell, the only differences is the data within the tags, but I'm no XML expert so I may have missed something. I opened my report template and loaded the xml data first from the date range that produces a rendered report properly and used preview...as expected it worked. When I did the same thing for the "bad" date range, I get the following set of errors, should I move my issue to the BI Publisher forum do you think?
ConfFile: C:\Program Files\Oracle\BI Publisher\BI Publisher Desktop\Template Builder for Word\config\xdoconfig.xml
Font Dir: C:\Program Files\Oracle\BI Publisher\BI Publisher Desktop\Template Builder for Word\fonts
Run XDO Start
Template: D:\BiPublisher\on_time_delivery.rtf
RTFProcessor setLocale: en-us
FOProcessor setData: D:\BiPublisher\ontimedelivery.xml
FOProcessor setLocale: en-us
Output type: MHTML
java.lang.reflect.InvocationTargetException
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at oracle.apps.xdo.common.xml.XSLT10gR1.invokeProcessXSL(XSLT10gR1.java:721)
     at oracle.apps.xdo.common.xml.XSLT10gR1.transform(XSLT10gR1.java:504)
     at oracle.apps.xdo.common.xml.XSLT10gR1.transform(XSLT10gR1.java:253)
     at oracle.apps.xdo.common.xml.XSLTWrapper.transform(XSLTWrapper.java:181)
     at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:1151)
     at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:275)
     at oracle.apps.xdo.template.FOProcessor.createFO(FOProcessor.java:1809)
     at oracle.apps.xdo.template.FOProcessor.generate(FOProcessor.java:1027)
     at RTF2PDF.runRTFto(RTF2PDF.java:708)
     at RTF2PDF.runXDO(RTF2PDF.java:548)
     at RTF2PDF.main(RTF2PDF.java:305)
Caused by: oracle.xdo.parser.v2.XPathException: An internal error condition occurred.
     at oracle.xdo.parser.v2.XSLStylesheet.flushErrors(XSLStylesheet.java:1534)
     at oracle.xdo.parser.v2.XSLStylesheet.execute(XSLStylesheet.java:521)
     at oracle.xdo.parser.v2.XSLStylesheet.execute(XSLStylesheet.java:489)
     at oracle.xdo.parser.v2.XSLProcessor.processXSL(XSLProcessor.java:271)
     at oracle.xdo.parser.v2.XSLProcessor.processXSL(XSLProcessor.java:155)
     at oracle.xdo.parser.v2.XSLProcessor.processXSL(XSLProcessor.java:192)
     ... 15 more

Need help troubleshooting: booting problems

I'm a bit stuck troubleshooting and could do with some advice.
A quick backstory: my mid-2010 13" MBP started to refuse to boot and displayed the flashing question mark, so the Geniuses replaced the hard drive connector cable - which sorted the problem for a few months.
So the flashing ? reappeared and I've tried a few fixes but need advice on where to go now, I think it might be a RAM problem.
What I've tried so far:
I've tried erasing and then verify and repair the HD through disk utility, using the OSX DVD, which came up OK.
Reset NVRAM
Clean Install: the HD would show up, but would fail after 30 mins; "Install failed... could not copy the necessary support files."
Ran Apple Hardware Test: showed error 4mem/4/40000000 0xabd93398
Took out each RAM card separately, cleaned with compressed air, tried out each one separately in either slot - still get a flashing ? on startup.
Any thoughts on what I could do would be really appreciated. Thanks for any advice!

If the OS installer failed removing RAM will not fix the damage.
The question mark means a bootable OS couldn't be found. You will need to reinstall the OS & see if the Mac stays stable. You may need to do this with one RAM module to see if the other is causing the crash. The AHT message is a RAM error, re-run the test & change modules to see if it is a particular module or slot that causes it.
You can try booting from external disk to try to rule out the internal HD, but that isn't a practical solution for a laptop, it's more to help diagnose where the fault could be.
You could take it to an Apple store to see if they can help, but I doubt there will be any chance of repairs unless you pay. The first visit will be free, but there is a limited amount of testing that can be done.

Need help troubleshooting slow startup after installing apps

I'm relatively new to OSX (though not new to computer administration and Unix/Linux) and I need some guidance troubleshooting my slow booting Macbook.
I've got a vanilla Macbook that can installed with 10.5.5 and I've since done the upgrade to 10.5.6. I didn't have any problems until I started installing some heavier apps like the Adobe CS3 suite and MS Office (I know, I should get iLife, but I have an available license of Office.)
Since doing these installs, it has noticeably, but not drastically, slowed the start-up time of my mac. The slow down starts in the blue screen part of startup and is most noticeable as the dock and the menus load.
(I've read about Searchlight indexing, which would make sense since these are both big suites, but it's had several hours of run time to do this and many reboots and it's still a problem.)
I have my suspicions that Adobe is mostly the culprit here, but I'm not sure where to look for start-up logs and configuration info. Are there any apps out there like Start Up Control Panel (www.mlin.net/StartupCPL.shtml) for OSX? Are there any places that would be a good place to start looking? I basically want to try to make sure that only the necessary stuff is loading at start-up and and none of that "helper app" crap that was so common in windows environments.

Francine gave you excellent advice about tracking down your problem. Once that's accomplished, see these:
Switching from Windows to Mac OS X,
Basic Tutorials on using a Mac,
MacFixIt Tutorials,
MacTips, and
Switching to the Mac: The Missing Manual, Leopard Edition.
Additionally, *Texas Mac Man* recommends:
Quick Assist.
Welcome to the Switch To A Mac Guides,
Take Control E-books, and
A guide for switching to a Mac.

Firewire port on my iMac. Need help troubleshooting

Similar Messages

Maybe you are looking for