FireWire problem with speaker system
I have a gen4 Nano that will not charge on my speaker system. I used the white docking adapter, but still nothing. It will play the music, but won't charge. We have three gen3 Nanos that are recognized, but not the gen4. Please help.
Hi,
Welcome to the Apple Discussions.
Unfortunately, your 4th generation nano won't charge when it's connected to some components. Those components use the FireWire pins to charge, where newer components use the USB pins. And the newer iPods have stopped using the FireWire pins and only use the USB pins.
Like yours, my speaker system uses the FireWire pins, but I have a 4G iPod, so I had to use a universal dock to charge my iPod, and then connect it to my speakers via a cable. On the one hand, it's not the best solution, but it also allows me to use a remote to control the iPod, which is a nice bonus I actually use more than I thought.
charlie
Similar Messages
-
Problem with Speaker and Headset in Windows Vista
Hi, I just got my Macbook Pro 13" and having problem with speaker and headset when working with Windows Vista (I have installed the driver from bootcamp). The sound very weak if I play music from Itunes or youtube even the volume already full and if i put my headset the sound not coming out. Is there anyone can help me to solve this problem?
Regards,EdwinWhen you post about Windows / Boot Camp, in Mac Pro (workstation) forum where others with a MacBOOK would be more likely to have same hardware configuration, and you won't find Windows drivers on Apple downloads. More like at
http://www.guru3d.com or other sites, or go to RealTek (if that is the type of audio you have). -
Workstation specs -- Any problems with this system quote?
Here are the specs I have been quoted. I'm not terribly knowledgeable about hardware, does anyone see any problems with this system? I have recently started shooting and editing weddings, engagements and corporate videos. I think it may be bit more than I need, but I would much prefer that to less than I need. Any input from the more tech savvy users would be much appreciated.
Darren Breckles
65539
ASUS Sabertooth X79 ATX LGA2011 DDR3 3PCI-E16 2PCI-E SATA3 USB3.0 SLI CrossFireX Audio Motherboard [Sabertooth X79]
72374
Mushkin Enhanced Blackline Frostbyte 32GB 4X8GB PC3-12800 DDR3-1600 CL10 Quad Channel Memory Kit [994055]
64540
Noctua NH-D14 SE2011 LGA2011 Heatpipe Cooler w/ NF-P14 140mm & NF-P12 120mm PWM Fans [NH-D14 SE2011] [Reg. $89.99]
67678
Intel 520 Series 240GB 2.5in SSD MLC 25nm SATA3 Solid State Disk Flash Drive OEM [SSDSC2CW240A310] [Reg. $279.99]
4729477
8 port internal via 2X SFF-8087, LSI2208 1GB cache, 6Gb/s, RAID 0/1/10/5/50/6/60 [RS25DB080]
1
84358
MSI GeForce GTX 770 OC Twin Frozr IV 1098/1150MHZ 2GB 7GHZ GDDR5 2xDVI HDMI DP PCI-E 3.0 Video Card [N770 TF 2GD5/OC] [Reg. $429.99]
62678
ASUS BW-12B1ST Blu-Ray Writer 12X BD-R 16X DVD+R SATA Black Retail [BW-12B1ST/BLK/G/AS][Reg. $89.98]
Environmental Fee $0.75 Per Item
45275
Microsoft Windows 7 Professional Edition 64Bit DVD SP1 OEM [FQC-04649] [Reg. $153.98]
75044
Fractal Design Define R4 ATX Tower Case Black Pearl 2X5.25 8X3.5INT No PSU Front 2XUSB3.0 Audio [FD-CA-DEF-R4-BL] [Reg. $119.99]
77641
Corsair AX860 860W ATX 12V V2.31 80 Plus Platinum Modular Power Supply Active PFC 120mm Fa *IR-$10* [CP-9020044-NA] [Reg. $189.89]
49665
nMedia ZE-C118 3.5in Multi Function Panel Flash Card Reader W/USB2.0 eSATA SDHC2.0 Win 7 Black [ZE-C118 ] [Reg. $19.99]
58276
StarTech.com 3.5in Hard Drive to 5.25in Front Bay Bracket Adapter [BRACKETFDBK]
78186
Noctua NF-A14 FLX 140mm Ultra Quiet Cooling Fan 900-1200RPM 115.5M3/H 19.2DBA 3-PIN [NF-A14 FLX] [Reg. $22.99]
4
22823
Premium PC Assembly and Testing With 1 Year Limited NCIX Warranty (PRE-CONFIG WIN. OS If Purchased)
Environmental Fee $3.00 Per Item
Note: Includes extra attention to cabling, lighting installation and extra burn-in period. Recommended for windowed cases. Assembly requires an additional 4-5* business days to ship once all parts are in stock. *typical lead time (currently 2-5 business days)
1
$3.00
73920-1
NCIX 3 Year On-Site Care Coverage for PC $3000.00 - $3999.99 (22823)
89510
Intel Core i7 4930K 6 Core 3.4GHZ (3.9GHZ Turbo) 12MB Hyperthreading LGA2011 Processor No HSF [BX80633i74930K] [Reg. $649.99]
81958
Western Digital RE 2TB SATA3 7200RPM 64MB Cache 3.5in Internal Hard Drive [WD2000FYYZ] [Reg. $213.57]
Environmental Fee $0.75 Per Item
4Very nice build list Darren!
I would have selected the Samsung 840 Pro 256GB SSD over the Intel 520, and Areca's ARC-1882i over the Intel SAS controller you list, but those are preferences not essential changes.
Regards,
Jim -
Weird Problems with K9A2 System
Can Someone Help Me?
I recently built a new system and have had nothing but problems. See system config in signature (Left off OCZ PRO Xtreme 1000W Power Supply With 4 12 Vrails at a max of 26 Amps each or 82 Amp all together and a 5 Volt rail at 30 Amps Max.) After putting it all (except the seagate 250 IDE drive), system would not even enter post. After strippin memory down to just 2 GB system finally entered post (although my memory were the same models from G.Skill one set was older and one set was new they had different voltages old required 1.9-2.0 while the newer worked at the default 1.8 voltage all timing and specs besides voltage were the same). I entered the bios setup and set my Memory voltage to 1.95 (What I had been runnin the older memory in my old system). Inserted all the memory back in and system booted right up to allow me to install my OS (Vista Home Premium 64-bit).
After the OS installed the system started having all kinds of wierd clitches/problems at one point it locked up and neither reset button nor the power button would work. After unplugging the power I noticed that the M connector for the front case switches was a little loose. I decided to just plug wires directly into board instead of using th M connector. Now my buttons worked again. I then proceded back into the bios and checked my voltages in the hardware monitor of the bios. All voltages looked to be fine with only an ocassional voltage fluctuation in the 5V line from 4.97 to 4.92 Volts and the 12V line was a little high 12.4 Volts. However, after booting back into vista and installing Everest Ultimate Edition it detected the that the 5 Volt line was only at 4.67 Volts. But was not fluctuating at all.
After installing the drivers for my system and proceding to install my anti-virus software the system started freaking out the mouse started lagging and sometimes not responding at all and the keyboard worked intermittently. I decided to remove the M connectors from these as well and that solved that problem. Upon rebooting the system and trying to install the Anti-Virus software again the system started telling me that I had just plugged in something to the audio connector. I had not so I just ignored it and continued to install my anti-virus. (the audio connector alert popped up 4X while I was finishing the installation of the software. I decided to test the audo so I but a DVD in and and watched the whole movie sound worked fine and no more pop ups about the audio connector until I started to install more software. During the next install of software the screen went black and the DVD and Hard Drive LED stopped flashing. It stayed this way for about 10 Min. I decided to hit the reset button and the system would not enter post again.
Once again I started to pull the Memeory It finnally worked after removing the new memory that I had just bought but none of my Maxtor hard drives were recognized and I started smelling smoke. ( Strange only the Maxtor drives went out, all had the interface boards and one chip on each drive fried. After disconnecting these drives and replacing the maxtor 120 GB IDE drive that had fried with a Seagate 250 GB IDE drive and reinstalling everyting onto it since the maxtor was my boot drive the system started up and was running fine except for the occasioal audio connector popup I finished Installing the rest of my software and everything was running good. So I assumed the problems were due to faulty ram. I contacted NewEgg and arranges for an RMA on the memory went shipped the memory back to NewEgg came back and started to move file some file to my NAS200 After about 4 hours the system locked up again (It had been almost 36 hours since I had had anyother problems with the system and it had not been turned off the whole time. All temps were good CPU was at 29C and GPU was at 46C system temp was 31C according to my Everest Ultimate so I didn't think it was a heat related issue)
Upon restarting my computer I got a message that a recent overclocking attempt had failed (I did not try to overclock!!) After going back into Bios and resetting all my settings the computer would not post agian. I tried to clear the CMOS with the jumper just to make sure that there wasn't any coruption inthe CMOS. Still no Luck. Pulled out one stick of the older ram and it booted but very slow. I went to a local parts dealer and bought some extremely over prived memory just so I could get my system back to 2 GB because I had video edditing software that didn't work very good on 1 GB. After installing no post again. So I started testing each stick of memory that I had in DIMM 1 they all worked but anytime I insert one into DIMM 2 it would not boot. Finnally I but 2 sticks into DIMM 3&4 and It started up and ran good. I decided to set my bios Unganged option to enabled and put memory back into DIMM 1 No luck would not post. I removed the memory from DIMM 1 and computer has worked ever fine except for an error coming out from sleep mode. (Never had a computer that didn't have a problem with that) I even updated the BIOS to 1.5 which was suppose to fix the wakeup problem.
So here is what I have I can use Dimm 1 by itself or I can use DIMM 3&4 but not both together. I'm about to buy a Power Supply (single 12V rail at 40 Amps and a 5V rail at 50 Amps) because I think that the 12 V reading as 12.4 and the 5 Volts reading as 4.67 in Everest Ultimate and 4.97 volts in Bios might have something to do with some of my problems. I did not check the Memory that I RMA'd by them selves on DIMM 3&4. I think that they may have been good now.
Can the 5V line registering the way it is 4.97 Bios/4.67 in Windows cause DIMM 2 to not function and create the lockups or can the socket or board be bad and that be what is causing this problem? And Should I RMA the motherboard back or just purchase a different motherboard?
System is pretty Stable as it is now with the voltages as they are. I really wantt to be able to put my new memory that I get back from NewEgg in and have my 4 GB of memory.OK I have removed the mother board and and checked for grounding issue or any damage from the fried hard drives board looks good did not find any grounding issues in the case. One thing I did not check was that I was using a Startech SATA to IDE converter to connect the the IDE drives that I didn't have the connectors on the board or.
I did some research before buying them and made sure to get one with a plastic box around the pcb due to so many people compaining that their's would short to the hard drive case. Since the loss of the HDD I didn't need the adapter so I quit Using it.
when I did my research on the adapter I found that many people had said that their HDD got hoter when using the adapter I guess my HDD just couldn't handle it. The Drive that I had connected with it was about 6 years old and I had been having intermittent problems with the connector not making a good connection when it was in my old system. (Anytime I would shut the power off for a long period of time and the HDD had a chance to cool down I would have to unplug and reconnect the ide cable from that drive.)
I didn't think that the problem would continue as I was moving it to an new case, motherboard, and cable.
And it just so happened that the drives that fried were all connected the the sata controller in the SB600 chip. My two SATA drives that survied the fire were on the Promise T3 controller. So I guess it is possible that the adapter/HDD configuration I had with the SATA to IDE caused some sort of feedback into the Motherboard's SATA controller and back into the oter HDD on that Controller. I have checked all SATA ports since this happened and they all still work so I'm assuming that it did not damage the chip.
As far as the memory situattion I don't see how the HDD frying could have damaged the Memory unless there is some special connectin between DIMM2 and the SATA controller that doesn't exist with the other DIMM slots. and if it had somehow effected the memory controller to cause this problem I would assume it would have done alot more damage to the cpu than just the memory controller part. So I think I'll try to RMA a new motherboard, if ZippZoomFly will let me this long after getting the board I've had it for about 3.5 weeks waiting on the other parts for the new system) and see what happens.
As for the memory, itself they are not mixed brands or models. I bought one set about a year ago when I purchased my X2 6000 processor and they have worked great as long as I kept the voltage above 1.9 V. The new memory has the same model # as the old but the label on them states the same timings and only a different voltage range. So as long as they voltage was set to within the range of both sets they should work exactly the same. I did notice that the board would only detect 3.25 GB instead of 4 GB, and I was prepared for this. Every Motherboard I have ever owned, no matter who the Manufacturer was, has had this problem. However Vista reported the memory correctly.
I guess if the new motherboard exhibits the same memory problem with not letting me use all slots then i'll buy a 2X2GB set -
Remote Resources: "A problem with the system proxy caused the connection to fail: End of file"
Hi, I am trying to use "Remote Resources" on the current version of the Microsoft Remote Desktop for Android app, I can input the webfeed and it even shows the apps that I have configured on the server for "Remote App", sadly whenever
I try to load any of the RemoteApps, I receive an error stating " A problem with the system proxy caused the connection to fail. End of File".
I don't know what I can do to fix this, I've tried many things to no avail, also, normal Remote Desktop connections from the Microsoft Android app work flawlessly to the server.
The relevant log is the following:
[2014-Jan-09 04:40:54] RDP (0): ----- BEGIN ACTIVE CONNECTION -----
[2014-Jan-09 04:40:54] RDP (0): Final rdp configuration used: memory bookmark [
label
hostname DIAZSERVER
port 3389
loadbalanceinfo
ui.swapmousebutton false
remote.program ||ZWaveUtil
remote.workingdirectory
remote.name ZWave Adapter Utility
remote.args
rail true
soundmode 0
connect_to_console false
redirectsdcard true
performance_flags 134
arc.sessionid 0
anonymous_username
authentication_level 2
use_redirection_server_name false
username administrator
gateway [
host = DIAZSERVER
port = 443
bypass = false
connect info[
hostnames = [localhost]
gatewayHost = DIAZSERVER
gatewayPort = 443
routingToken = Cookie: mstshash=administrator
redirectionGUID =
proxyHost = 200.5.68.10
proxyPort = 8080
sessionId = -1
[2014-Jan-09 04:40:54] RDP (0): Using HttpConnect proxy at 200.5.68.10:8080
[2014-Jan-09 04:40:54] RDP (0): Using Basic Authentication with username ''
[2014-Jan-09 04:40:54] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
AsioEndpointContext (0): startup(): starting up down context
[2014-Jan-09 04:40:54] RDP (0): Resolved '200.5.68.10' to '200.5.68.10' using NameResolveMethod_DNS(1)
[2014-Jan-09 04:40:54] RDP (0): Resolved '200.5.68.10' to '200.5.68.10' using NameResolveMethod_DNS(1)
ASIOSocketAdapter (9): readSomething error. message: End of file. instance: 0x5d39d5c0
RpcOverHttp (9): Stream error in endpoint 0x5abbc170 : A problem with the system proxy caused the connection to fail: End of file
[2014-Jan-09 04:40:55] RDP (0): Error message: A problem with the system proxy caused the connection to fail: End of file
[2014-Jan-09 04:40:55] RDP (0): Error message: A problem with the system proxy caused the connection to fail: End of file
[2014-Jan-09 04:40:55] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
ASIOSocketAdapter (9): handleRead(): exception: Exception in file '/var/lib/jenkins/jobs/rc-android-app/workspace/rdp-layer/library/jni/librdp/private/httpendpoint.cpp' at line 489
User Message : Failed to read from channel: -1. instance: 0x5d39d5c0
[2014-Jan-09 04:40:55] RDP (0): Disconnect initiated by client
RpcOverHttp (9): Exception in endpoint 0x5abbc170 : Exception in file '/var/lib/jenkins/jobs/rc-android-app/workspace/rdp-layer/library/jni/librdp/private/httpendpoint.cpp' at line 489
User Message : A problem with the system proxy caused the connection to fail: Failed to read from channel: -1
[2014-Jan-09 04:40:55] RDP (0): Exception caught: Exception in file '/var/lib/jenkins/jobs/rc-android-app/workspace/rdp-layer/library/jni/librdp/private/httpendpoint.cpp' at line 489
User Message : A problem with the system proxy caused the connection to fail: Failed to read from channel: -1
[2014-Jan-09 04:40:55] RDP (0): Exception caught: Exception in file '/var/lib/jenkins/jobs/rc-android-app/workspace/rdp-layer/library/jni/librdp/private/httpendpoint.cpp' at line 489
User Message : A problem with the system proxy caused the connection to fail: Failed to read from channel: -1
AsioEndpointContext (0): shutdown(): shutting down context
AsioEndpointContext (0): shutdown(): context shut down
AsioEndpointContext (0): shutdown(): shutting down context
AsioEndpointContext (0): shutdown(): context shut down
[2014-Jan-09 04:40:57] RDP (0): ------ END ACTIVE CONNECTION ------My problem is that the "proxy" is the proxy set up by my 3G configuration so, I tried connecting to the remote resources through my work wifi and I get the following:
[2014-Jan-14 16:58:13] RDP (0): ----- BEGIN ACTIVE CONNECTION -----
[2014-Jan-14 16:58:13] RDP (0): Final rdp configuration used: memory bookmark [
label
hostname DIAZSERVER
port 3389
loadbalanceinfo
ui.swapmousebutton false
remote.program ||chrome
remote.workingdirectory
remote.name Google Chrome
remote.args
rail true
soundmode 0
connect_to_console false
redirectsdcard true
performance_flags 134
arc.sessionid 0
anonymous_username
authentication_level 2
use_redirection_server_name false
username Administrator
gateway [
host = DIAZSERVER
port = 443
bypass = false
connect info[
hostnames = [localhost]
gatewayHost = DIAZSERVER
gatewayPort = 443
routingToken = Cookie: mstshash=Administrator
redirectionGUID =
proxyHost =
proxyPort = 0
sessionId = -1
[2014-Jan-14 16:58:13] RDP (0): Not using any proxy
[2014-Jan-14 16:58:13] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
AsioEndpointContext (0): startup(): starting up down context
ASIOSocketAdapter (9): handleResolve(): boost error: Host not found. Please provide the fully-qualified name or the IP address of the host.. instance: 0x5d474090
RpcOverHttp (9): Stream error in endpoint 0x5d46b678 : Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 16:58:17] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 16:58:17] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 16:58:17] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
ASIOSocketAdapter (9): handleResolve(): boost error: Host not found. Please provide the fully-qualified name or the IP address of the host.. instance: 0x5d445158
RpcOverHttp (9): Stream error in endpoint 0x5d49fa30 : Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 16:58:17] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 16:58:17] RDP (0): Disconnect initiated by client
[2014-Jan-14 16:58:17] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
AsioEndpointContext (0): shutdown(): shutting down context
AsioEndpointContext (0): shutdown(): context shut down
AsioEndpointContext (0): shutdown(): shutting down context
AsioEndpointContext (0): shutdown(): context shut down
[2014-Jan-14 16:58:17] RDP (0): ------ END ACTIVE CONNECTION ------
Now, I know the host can be resolved because: if I connect to the same host but on a full remote desktop (as opposed to just RemoteApp on it) I have no trouble either through 3G OR through my work connection.
Moreover, I also tried directly inputting the IP as opposed to the web address of my server, I get the same error, that is the Remote Resources tab is able to access the feed (because it shows the available RemoteApps) but when I click an app it says it can't
find the Host, here's the log for the connection directly to the IP address/rdweb/feed/webfeed.aspx :
[2014-Jan-14 17:09:27] RDP (0): ----- BEGIN ACTIVE CONNECTION -----
[2014-Jan-14 17:09:27] RDP (0): Final rdp configuration used: memory bookmark [
label
hostname DIAZSERVER
port 3389
loadbalanceinfo
ui.swapmousebutton false
remote.program ||chrome
remote.workingdirectory
remote.name Google Chrome
remote.args
rail true
soundmode 0
connect_to_console false
redirectsdcard true
performance_flags 134
arc.sessionid 0
anonymous_username
authentication_level 2
use_redirection_server_name false
username administrator
gateway [
host = DIAZSERVER
port = 443
bypass = false
connect info[
hostnames = [localhost]
gatewayHost = DIAZSERVER
gatewayPort = 443
routingToken = Cookie: mstshash=administrator
redirectionGUID =
proxyHost =
proxyPort = 0
sessionId = -1
[2014-Jan-14 17:09:27] RDP (0): Not using any proxy
[2014-Jan-14 17:09:27] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
AsioEndpointContext (0): startup(): starting up down context
ASIOSocketAdapter (9): handleResolve(): boost error: Host not found. Please provide the fully-qualified name or the IP address of the host.. instance: 0x5d372f28
RpcOverHttp (9): Stream error in endpoint 0x5dd6b168 : Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 17:09:31] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 17:09:31] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 17:09:31] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
ASIOSocketAdapter (9): handleResolve(): boost error: Host not found. Please provide the fully-qualified name or the IP address of the host.. instance: 0x5d378de0
RpcOverHttp (9): Stream error in endpoint 0x5e9cc1f0 : Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 17:09:31] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 17:09:31] RDP (0): Disconnect initiated by client
[2014-Jan-14 17:09:31] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
AsioEndpointContext (0): shutdown(): shutting down context
AsioEndpointContext (0): shutdown(): context shut down
AsioEndpointContext (0): shutdown(): shutting down context
AsioEndpointContext (0): shutdown(): context shut down
[2014-Jan-14 17:09:31] RDP (0): ------ END ACTIVE CONNECTION ------
I'm really puzzled here, I've tried checking if ports where open, and ports 443 and 3389 are wide open, I don't know what else it could be. -
I have Iphoon 4 and ihave problem with speaker what i have to do?
I have Iphoon 4 and ihave problem with speaker what i have to do?My problem is no body can heir me.
I have got my IPhoon from London U.K. Now i'm in Saudia ArabiaIf it's happening on all the apps that you've downloaded from the App Store, but not the Apple built-in ones, then try downloading any free app from the store (as that appears to reset something) and then re-try them - the free app can then be deleted.
If it's happening on all apps then try closing them all completely and then see if they work when you re-open them : from the home screen (i.e.not with any app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of each app to close them, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't work then you could try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot. -
8900 printer changed black cart. error code problem with printer system
Changed black cartridge in 8900 series all in one printer error message says trouble with print system call HP. Have removed and reinstalled catridge still same error message. HELP!!!!!
Hi @melvinc
Welcome to the forums
I read about the issue you are facing on your printer, as it's now showing a problem with the ink system. I cannot locate a "8900" printer, could you possibly have the Officejet 8600? If so, please try out the steps from the guide below. If you reach a step where it asks to replace the printhead or printer, call us directly to see what your replacement options are with HP.
A 'Problem with Ink System' Error Message Displays on the Control Panel or Computer During Setup
Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
Have a great day
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution! -
I am having problem with speaker the sound is not coming properly from it also the right side hinges
Hi,
I am having problem with speaker from last few days when ever i tryed to play songs the speaker is not giving sound properly. Secondly the the right side hinges also boken so needed support for both the problems.
Thanks & Regards
Umender SahaniFirst, try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again. You will not lose data by resetting.
If this does not help, set it up as new device, explained here:
How to erase your iOS device and then set it up as a new device or restore it from backups
If still no luck, get it checked by visiting an Authorized Apple Service Provider or contact Apple Support to get it serviced:
iPhone - Contact Support - Apple Support -
140063685933 this is the receipt no
Apart of two purchase there all rest I never received was a problem with the system they couldn't be download and naw you are charging me
Haw unprofessional is that and more than an hour can't find how to get to customer service to correct the mistake
Just so fed up will never ever pitches anything waiting of time and moneyApple is not here. Apple does not answer questions here. There are only volunteer users here.
The charge to your credit card takes place before you download the app.
If you are having problems downloading the apps that you bought, you will need to explain the issue in detail if you wish someone to help you. -
Audio/Firewire Problems with Mini, Please Help!
I just bought a brand new Mini from Amazon.com and am having some problems. First, when I plug computer speakers into the mini, the sound continues to come from the internal speaker and the mini ignores the speakers. In System Preferences, it doesn't even recognize that something is plugged into the machine.
Second, the Mini does not recognize my external, Firewire iSight camera. In System Profiler, it does not show anything connected to the port when the camera is connected.
The Mini is the latest rev running 10.4.11. Leopard upgrade disks should be in the mail soon.
Any ideas as to what is wrong? Should I just return to Amazon for a replacement? Thanks for your help!Having just posted in a similar situation, pardon the cut and paste, but these are the first two (and easiest) things to try:
First reset parameter RAM - it's an area of non-volatile memory used for system settings and hardware configuration. It it gets corrupted, it can cause odd problems.
Reset PRAM
-Shut down the computer.
-Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in the next step but one.
-Turn on the computer.
-Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
-Hold the keys down until the computer restarts and you hear the startup sound for the second time.
-Release the keys.
Next, perform an SMC reset. The SMC is the device which controls system hardware and devices, so if there is a problem with hardware components not functioning, it could be that.
To reset the SMC on an Intel mini:
-From the Apple menu, choose Shut Down (or if the computer is not responding, hold the power button until it turns off).
-Unplug all cables from the computer, including the power cord and any display cables.
-Wait at least 15 seconds.
-Plug the power cord back in, making sure the power button is not being pressed at the time.
-Then reconnect your keyboard and mouse to the computer.
-Press the power button on the back to start up your computer. -
10.4.7 update and external firewire problems with HD corrupion
Dear all,
Advised by Jpfresno I started this new topic about Tiger 10.4.7 update.
I will repeat my post and what was happening 2 weeks ago:
“In 5 years 10.4.7 update was a tragedy for my Powerbook Ti 667. When I update from 10.4.6 to 10.4.7 my 300 GB firewire drive gets corrupted, after repairing it with DiskWarrior and after connecting it to my PowerBook my computer freezes and I must shut it down via powerbutton. Safari also crashes after the update.
I just erase my Hard Drive and after that install 10.4 and update with combo to 10.4.7. But I had the same problems: finder freezes with connected firewire devices and also safari when browsing. I spend a week trying to solve the problem but no luck.
Yesterday and with no firewire devices, 10.4.7 freeze and I have big trouble in order to started my powerbook!!! Even when i insert the 10.4 install DVD it did not detected my HD. Finally I get it to work and install 10.4 and combo update to 10.4.6 and everything works. My external firewire drive and safari. I already diagnose my HD with disk utility, TechTool and directories with Diskwarrior and everything is ok.
I clone my 10.4.6 to firewire, boot from it and everything is working. I let my external drive connected and finder does not freeze.
My conclusion is that the problem is 10.4.7 update. It only give me problems and I was getting crazy with it. 10.4.6 is working good and I do not advice anyone to update to 10.4.7.”
Last week after reinstalling 10.4.6 I started to have HD problems with my Powerbook 667. I did a surface scan with TechTool I it reported bad sector. Then I done a zero disk format but after a second surface scan TechTool also reported bad sector. Then I take the decision to replace my internal HD. I bought a Samsung 40GB Hard Drive and installed it on my PowerBook. Then I have done a clean installation of 10.4.6 with all applications that I need and clone it to my hard drive with Intego Personal Backup software. Everything works on 10.4.6. and external firewire drive.
After that everything is ok. But I decided to test if my problem derivates from 10.4.7 update or from previous HD corruption. Then I install 10.4.7 update on my Internal Hard Drive. Everything is working good but after connecting my external Hard Drive the finder started to freeze!!!!!!!!!. After that I tried cloning HD to external firewire with Intego personal Backup. Everything was working good but when it was finishing the backup process started to give errors!! I started panic. I interrupted the backup process but after and after restart I found something strange with 10.4.7. The system started up, I login but I could not started any application!!!??? All my application died!
Then I have done one more clean installation of tiger and 10.4.6 update.
My conclusions are that the 10.4.7 update causes all the problems that I have on my PowerBook, because I used the same methods and same software/hardware on 10.4.6 and did no have any problem.
This last two weeks were very difficult to me. I tough that these problems do not happen with Apple computers but I was wrong!!! It is very hard to me to deal with it. I always said to my friends that I never had problems with Apple computers. I accept that a hard drive died because the use of it but I can not accept that a system update cause me 2 weeks of hard problems and make me loose precious work information! I always love apple computers and Apple OS but now I am disappointed
If anyone can explain what happen or have a solution for those problems?
Thanks for the comprehension and collaboration.
Best Regards
Mac OS X (10.4.6)Hi, alsvieira.
There are some things you did not check in all of your troubleshooting:
1. Run the Apple Hardware Test (AHT) that came the affected computer. See my "Apple Hardware Test" FAQ for comprehensive advice on using the AHT in troubleshooting.
2. re: FireWire troubleshooting: Here is some general troubleshooting advice that may help if problems return with your FireWire drive:1. Review the AppleCare Knowledge Base document "What to do if your computer won't recognize a FireWire device".
2. If this problem occurred after installing a recent Mac OS X Update, and you are also unable to mount CDs, DVDs, or disk images perform the steps in this Mac OS X Hints article. This worked under Panther and may also work in certain situations under Tiger.
3. Power-on the FireWire drive before starting up (booting) your Mac.
4. Reset PRAM and NVRAM.
5. Resett the power-management chip in your Mac.
6. Try a different FireWire port. James Wiebe, CEO of WiebeTech, has published FireWire Port Failures in Host Computers and Peripheral Devices, a white paper providing backgroud information and technical analysis concerning the causes of failure for FireWire ports. This may provide additional diagnostic information.
7. Micromat TechTool Pro version 4 can test the FireWire bus in your computer: this tests the bus — not the ports — but if the problem is on the FireWire bus on the logic board, it should reveal it.
8. Check with the manufacturer of your FireWire drive or enclosure to see if any firware updates are available for such.
9. Hopefully, the partition map on the FireWire drive is not damaged. This can happen if the FireWire drive was not Ejected before being disconnected or powered off. If it still refuses to mount, you may need to employ data recovery tools or services: see my "Data Recovery" FAQ.Note that some of the information above is from the "FireWire Problems" chapter of my book, Troubleshooting Mac® OS X.
Dr. Smoke
Author: Troubleshooting Mac® OS X
Note: The information provided in the link(s) above is freely available. However, because I own The X Lab™, a commercial Web site to which some of these links point, the Apple Discussions Terms of Use require I include the following disclosure statement with this post:
I may receive some form of compensation, financial or otherwise, from my recommendation or link. -
i bought my iphone 4s 2 month ago and now i am having problem with my speaker .I get sound through headphones, but not through speakers. Occasionally I will get sound (clicking when unlocking) but then it goes again. is there any solution or is there any setting for that please help me fast now my iphone 4s is like A deaF.If i clamis for warranty do i get it fixed?
Hi, StarrDutches. Welcome to Microsoft Mobile Community! Let's try to resolve it. Does your phone run with the latest software? Were you able to set your phone via speaker mode while you're in a call? Where are you located, btw? It seems that you're trying to use some of the speech commands, right? You may check this link to see if you're current region is included from the list: http://www.windowsphone.com/en-us/how-to/wp8/basics/feature-and-service-availability. You may also update the phone's system apps from the Settings > swipe left, applications > store > check for updates. Keep us posted.
-
I have SB Audigy 2 ZS and Genius SW 5. Home Theater speaker system. I've connect it through ac3 input 2 (on speakers) with din-3x3,5mm jack cable to soundcard. But my subwoofer don't play..and when I use a reduction cable for sbw/cen cable then my subwoofer plays and my center speaker don't play..
No, but it's DIN (probably) to 3x 3,5mm jack cable. It was in the package with speakers. And reduction cable was also there (on reduction is written: if u have problem with sound from center or subwoofer use it and probably it will be ok).
Reduction cable is jack 3,5 input to jack 3,5 output...this is answer from Genius tech. support:
,,It seems that there is a problem on your soundcard. There is only one channel output of your sub/center instead of two channels from your soundcard. So when you use the reverse cable, then the output channel will be also reversed. '', but soundcard is OK, i think.
I haven't swapped the cable, but i think cable is ok.
I've found a lot of the same problems in discussing forums on the same configuration...
Thanks for help. -
Nokia Lumia 920 voice input problem with speaker o...
My voice input doesn't seem to pick up any sound while having the speakers on. The voice recognition doesn't work, it just says that i didn't hear anything. I'm having the same problem with soundhound, skype and turning speaker on while calling. Someone else having the same issue?
I have the latest Nokia update, and the latest Nokia system apps from the store, i've used the reset sometimes when my phone freezes but the problem's still there. Its really annoying.
I sent my phone on service about a month ago because of another issue, they said thet they changed the motherboard, and that's when this problem started to occur.
I've seen other people on the net with the same problem, but it looks like it's a rare problem. -
Firewire problems with audio interface
Hi, I have a problem with the firewire connection of my Power Mac G4: I have a Tascam FW-1884 audio interface and when I turn it on, the firewire led (that should be always turned on for the correct working of the machine) after a pair of seconds turns off and doesn't work at all..
Here's what my system console says if helps..
===== Thu Jan 12 2006 ===== 09:44:12 Europe/Rome =====
Jan 12 09:44:20 localhost kernel: TASCAM FW1884 Audio Device: init (1 of 1)
Jan 12 09:44:20 localhost kernel: TASCAM FW1884 Audio Device: start 1.2.1 (instances 1)
Jan 12 09:44:21 localhost kernel: TASCAM FW1884 Audio Device: message 0xE00087D2 for 0x12060000
Jan 12 09:44:23 localhost kernel: TASCAM FW1884 Audio Device: HandleWatchdogTimer: prefs daemon relaunched
Jan 12 09:44:24 localhost kernel: TASCAM FW1884 Audio Device: newUserClient
Jan 12 09:44:24 localhost kernel: TASCAM User Client: start
Jan 12 09:44:24 localhost kernel: TASCAM User Client: clientMemoryForType
Jan 12 09:44:29 localhost kernel: TASCAM FW1884 Audio Device: High speed bus detected
Jan 12 09:44:29 localhost kernel: TASCAM FW1884 Audio Device: FinishStartup: FW884MacXDevice (216812)
Jan 12 09:44:29 localhost kernel: TASCAM FW1884 Audio Device: FW1884DeviceHandlePlugIn
Jan 12 09:44:29 localhost kernel: TASCAM FW1884 Audio Device: Driver Register Version 0x00000014
Jan 12 09:44:29 localhost kernel: TASCAM FW1884 Audio Device: FW1884REGISTERVERSION 0x00000014
Jan 12 09:44:29 localhost kernel: TASCAM FW1884 Audio Device: FW1884FPGAVERSION 0x00010031
Jan 12 09:44:29 localhost kernel: TASCAM FW1884 Audio Device: FW1884ARMVERSION 0x000100B7
Jan 12 09:44:29 localhost kernel: TASCAM FW1884 Audio Device: FW1884HARDWAREVERSION 0x00030000
Jan 12 09:44:29 localhost kernel: TASCAM FW1884 Audio Device: FW1884HARDWARESERIAL 0x00000000
Jan 12 09:44:29 localhost kernel: TASCAM FW1884 Audio Device: FW1884GUIDMSB 0x00022EFF
Jan 12 09:44:29 localhost kernel: TASCAM FW1884 Audio Device: FW1884GUIDLSB 0xFE800000
Jan 12 09:44:29 localhost kernel: TASCAM FW1884 Audio Device: FW1884DeviceHandlePlugIn mRegBaseAddress 0x00000000
Jan 12 09:44:29 localhost kernel: TASCAM FW1884 Audio Device: FW1884DeviceHandlePlugIn mNodeNum 0x00000000
Jan 12 09:44:29 localhost kernel: TASCAM FW1884 Audio Device: FW1884DeviceHandlePlugIn mGenerationNumber 0x0000000E
Jan 12 09:44:29 localhost kernel: TASCAM FW1884 Audio Device: FW1884DeviceHandlePlugIn mlocalNodeNum 0x00000001
Jan 12 09:44:29 localhost kernel: TASCAM FW1884 Audio Device: FW1884DeviceHandlePlugIn mMIDIReceiveHi 0x00000002
Jan 12 09:44:29 localhost kernel: TASCAM FW1884 Audio Device: FW1884DeviceHandlePlugIn mMIDIReceiveLo 0x00000000
Jan 12 09:44:29 localhost kernel: TASCAM FW1884 Audio Device: initHardware
Jan 12 09:44:29 localhost kernel: TASCAM FW1884 Audio Device: createAudioEngine
Jan 12 09:44:29 localhost kernel: TASCAM Audio Engine: init (1)
Jan 12 09:44:29 localhost kernel: TASCAM Audio Engine: start (3)
Jan 12 09:44:29 localhost kernel: TASCAM Audio Engine: initHardware (3)
Jan 12 09:44:29 localhost kernel: TASCAM Audio Engine: performFormatChange
Jan 12 09:44:29 localhost kernel: TASCAM Audio Engine: performFormatChange
Jan 12 09:44:29 localhost kernel: TASCAM FW1884 Audio Device: New RECORD_ISOCHANNEL 0x00000001
Jan 12 09:44:29 localhost kernel: TASCAM FW1884 Audio Device: New RECORD_ISOSPEED 0x00000002
Jan 12 09:44:29 localhost kernel: TASCAM FW1884 Audio Device: New PLAYBACK_ISOCHANNEL 0x00000002
Jan 12 09:44:29 localhost kernel: TASCAM FW1884 Audio Device: DoStartAudioTransfers w/resync
Jan 12 09:44:30 localhost kernel: TASCAM FW1884 Audio Device: Input stream stopped (B)
Jan 12 09:44:30 localhost kernel: TASCAM FW1884 Audio Device: * Failed WriteRegisterLong 0xE00002D6
Jan 12 09:44:30 localhost kernel: TASCAM FW1884 Audio Device: at 0x00000200
Jan 12 09:44:31 localhost kernel: TASCAM FW1884 Audio Device: * Failed ReadRegisterLong 0xE00002D6
Jan 12 09:44:31 localhost kernel: TASCAM FW1884 Audio Device: at 0x00000200
Jan 12 09:44:31 localhost kernel: TASCAM FW1884 Audio Device: New RECORD_ISOCHANNEL 0x00000000
Jan 12 09:44:31 localhost kernel: TASCAM FW1884 Audio Device: * Failed WriteRegisterLong 0xE00002D6
Jan 12 09:44:31 localhost kernel: TASCAM FW1884 Audio Device: at 0x00000204
Jan 12 09:44:32 localhost kernel: TASCAM FW1884 Audio Device: * Failed ReadRegisterLong 0xE00002D6
Jan 12 09:44:32 localhost kernel: TASCAM FW1884 Audio Device: at 0x00000204
Jan 12 09:44:32 localhost kernel: TASCAM FW1884 Audio Device: New RECORD_ISOSPEED 0x00000000
Jan 12 09:44:32 localhost kernel: TASCAM FW1884 Audio Device: * Failed WriteRegisterLong 0xE00002D6
Jan 12 09:44:32 localhost kernel: TASCAM FW1884 Audio Device: at 0x0000020C
Jan 12 09:44:33 localhost kernel: TASCAM FW1884 Audio Device: * Failed ReadRegisterLong 0xE00002D6
Jan 12 09:44:33 localhost kernel: TASCAM FW1884 Audio Device: at 0x0000020C
Jan 12 09:44:33 localhost kernel: TASCAM FW1884 Audio Device: New PLAYBACK_ISOCHANNEL 0x00000000
Jan 12 09:44:33 localhost kernel: TASCAM FW1884 Audio Device: * Failed WriteRegisterLong 0xE00002D6
Jan 12 09:44:33 localhost kernel: TASCAM FW1884 Audio Device: at 0x0000022C
Jan 12 09:44:34 localhost kernel: TASCAM FW1884 Audio Device: * Failed WriteRegisterLong 0xE00002D6
Jan 12 09:44:34 localhost kernel: TASCAM FW1884 Audio Device: at 0x00000214
Jan 12 09:44:34 localhost kernel: TASCAM FW1884 Audio Device: * Failed WriteRegisterLong 0xE00002D6
Jan 12 09:44:34 localhost kernel: TASCAM FW1884 Audio Device: at 0x00000218
Jan 12 09:44:35 localhost kernel: TASCAM FW1884 Audio Device: * Failed WriteRegisterLong 0xE00002D6
Jan 12 09:44:35 localhost kernel: TASCAM FW1884 Audio Device: at 0x0000021C
Jan 12 09:44:35 localhost kernel: TASCAM FW1884 Audio Device: * Failed WriteRegisterLong 0xE00002D6
Jan 12 09:44:35 localhost kernel: TASCAM FW1884 Audio Device: at 0x00000228
I've tried running the same interface on my i-book (with the same drivers installed on the powermac) and all was good..
Anyone can help me?
Thanks =)
power mac G4 quicksilver 800Mhz Mac OS X (10.3.9) i-book G4 1,25Ghz
power mac G4 quicksilver 800Mhz Mac OS X (10.3.9) i-book G4 1,25Ghz
power mac G4 quicksilver 800Mhz Mac OS X (10.3.9) i-book G4 1,25Ghz
power mac G4 quicksilver 800Mhz Mac OS X (10.3.9) i-book G4 1,25Ghz
power mac G4 quicksilver 800Mhz Mac OS X (10.3.9) i-book G4 1,25GhzOn both computers I have only one account, the fw cable is always the same..
I have purchased a new cable and I'm testing it..
Another thing to say is that the fw port number 2 is generally working better than 1.. I mean, while port 1 never loads my tascam (the computer firewire connection is always loaded succesfully on both ports) port 2 sometimes works.. well this can't be called stability at all =)
Sometimes reastarting computer, unplugging cables etc can help starting succesfully a new session.. I've already resetted PMU but no progress..
All these things don't last longer than one session..
Maybe you are looking for
-
How to make a Track matte on a text layer??
Hi, I have two text layers stacked one above the other. The top layer scales up and blows up to reveal the text layer down. I have tried to use the Text Layer above to the down below but it disappears and does not show any effect. The same effect sho
-
Hi - I've been working on the following script to automate creation of users. I want to run it as a scheduled task so the service desk guys don't have to spend the time. The way it sits currently it will create the user just fine. It fails when tryin
-
Safari will open up, but will unexpecidly quit
HI, To go onto the internet I will click on the Safari icon. Once I click on it my iBook G4 will start to make this strange noise. Sarfai will then open load the main page but then it will unexpecidly quit. ALso, my internet explorer will not open ei
-
OSX 10.4.9 - Can't Process Installation CD
My MacbookPro keeps on having these kernel panics. As in, I'll start it up and it'll only load up till the blue screen, then the "restart your mac" thing pops up. Oh and vertical blue lines appear across the screen as it displays the panic. So I call
-
Hi, Db : 10.2 Os : Aix6 Is it possible to get the explain for insert statment without inserting the data in oracle 10g?I set set autotrace traceonly explain. SQL> insert into emp select * from emp; 245760 rows created. Execution Plan Plan hash value: