FireWire solution #3...should at least work, technically.
Folks have been providing cable-based solutions on this forum, but those do not translate data back and forth. Here's one potential solution for dealing with the firewire conversion.
1. Get an ExpressCard USB adaptor, such as the one in the link below (Yes, works on the Mac):
http://www.siig.com/ViewProduct.aspx?pn=JU-000012-S1
2. Get an ExpressCard FireWire port and plug it into the adaptor:
http://www.usbgear.com/computercabledetails.cfm?sku=SS-800EXP&cats=496&catid=496
http://www.sonnettech.com/product/fwusbexpresscard34.html
That should provide the proper conversion for getting FireWire devices recognized, though I've not seen folks test them out. There are some limits to the USB to ExpressCard adaptors, which wont work with some PCIe-based expresscards...dunno if that would play a role with the firewire expresscards though.
Good luck, and if anyone has had success with this pleas post it!
Looking around I found a website that said this:
"ExpressCards using the PCI Express (PCIe) portion of the ExpressCard standard include very high performance devices like FireWire 800 and eSATA host adapters."
It doesn't say firewire 400, but my guess would be that there is a good chance that even a 400 express card may not be compatible with this cool looking adapter found.
someone would have to find the specifics on the 400 express cards in question before trying it out. I wouldn't hold my breath. Hate to be pessimistic. This was the most promising looking workaround yet.
edit: Yup, reading some descriptions of the firewire 400 cards on some sites it says "Utilizing the performance of PCI Express" so this "workaround" will not give firewire to the MacBook.
Firewire just is not compatible on the USB bus no matter how much we want to believe it, at least not with any current tech out there I've been finding.
Message was edited by: Stuart Vandeventer
Similar Messages
-
My iPod wont turn on i was using it one moment and it was fine now its not turning on. my home button doesnt work so i cant use that solution what should i do now
Try:
- iOS: Not responding or does not turn on
When it says place the iPod in recovery mode,
Place the iPod in recovery mode using one of these programs:
For PC
RecBoot: Easy Way to Put iPhone into Recovery Mode
If necessary:
Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
and
RecBoot tip
For MAC or PC
The Firmware Umbrella - TinyUmbrella
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Does 2 firewire audio and video interface can work together on FCP ?
hello,
My audio interface is a TC Electronic Konnekt 24D
my video interface is a Canopus ADVC 110
my hard drives are plugged in firewire too
and I use Final Cut Pro 5.0.4
So, the konnekt is recognized by FCP only when the Canopus is not plugged. And even then, the audio sometimes drop out and sometimes causes the app to crash, so that I have to trash the preferences
When I plug the Canopus, the Konnekt 24D is recognised by OS X but not FCP
I want to use the voice over tool with the konnekt 24D, so what should I do ?
Does 2 firewire audio and video interface can work together ?
If so, maybe I only have a driver problem from TC Electronic.
But if not, I have to change this interface. Let me know if only RME, MOTU, Presonus and Edirol work, as it is said on apple's webpage for hardware compatibility
thanks
eMac G4 1,25 Ghz Mac OS X (10.3.9)
eMac G4 1,25 Ghz 1 Go RAM DDR Mac OS X (10.3.9)The 1082 does show up as a possible input when I open
the VO tool.
Ok. So an audio interface can be plugged to FCP without crashing the app. Because of the Konnekt driver problem, I wasn't shure of this.
I use my Aja box for export & external monitoring.
All my audio sources run back into the Tascam and I
use the analog mixer in the 1082 to monitor different
sources.
When I view external video, the audio follows it to
keep sync.
that's exactly what I want with other I/O interfaces. I'd like to monitor video with the canopus ADVC 110, and monitor audio with the Konnekt 24D (or another interface if this one is not compatible)
I also imput dailies with a deck or a camera (DV or HDV) but that's not the point here.
I want to imput audio with the Konnekt 24D because of its audio quality. Not audio sync to video dailies. But voice over, in sync with FCP video playback (for me, tha ADVC 110) -
An unknown error occurred (0x80092013) what the **** is going on from last six month i am unable to access i tune store?pls give me solution which should help me to shortout this problem as soon as possible. i have not expected this from apple
I have been trying for months to put iTunes on my laptop and kept getting installation errors in Windows 7. I gave up and just installed iTunes on my PC running XP.
Now I have to install Quicktime on the laptop and once again I get an installation error 0x800736FD.
All windows updates are fine, none failed.
I have removed all apple software from my laptop using CCleaner, common files and folders. Tried reinstalling and still the same error.
Could you offer any advice on how to get both quicktime and then iTunes working??
Thank you in advance -
My Ipod Touch have a black screen when an app shut down and I can not shut down the Ipod. The screen is still black and I did the press two buttons solution and it doesn't work. What I have to do now?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I have tried reseting my phone many different ways and updating all the software. Nothing works the app continues to crash. Apple says in another thread to someone else to follow third party app solutions but those do not work as you cannot delete and re-download a pre-loaded Apple app...... Any help would be necessary as I just bought the sensor from Apple, and now my phone won't connect.
Seems like a waste of money, since the products are made by the exact same company I expect them to work. I have also noticed that other people have had this problem and have also been unable to solve it.I've been facing the very same issue for 3 days. Did you figure it out?
-
Delivery Date should propose only working days (Excluding weekends and holidays
Hello All
I have one requirement here, where delivery dates should propose only working days and it should not allow to add weekends and holidays during the creation of sales order.
I would like to know if there are any standard settings to be done in plant or shiping point?
Kindly need all your input on this
Thanks
NaveenHello All
Same calendar has already been assigned in shipping point,plant and sales org and also in the calendar holidays been maintained, even though when we create a sales order it will accept weekends and holidays
Thanks -
Firewire port on Macpro won't work with my Sony DV Cam
I just got my Macpro and love it-but I do have a small problem that maybe somebody can help with.
I have a Sony PD100A. I was using this camera on my PC just up until last week and grabbing video via firewire into Premier. It all worked fine.
On my Mac, I plug into a firewire port, and neither iMovie or FCpro can capture from the camera. I seems to recognize the camera, but when you try to capure video, it just locks up.
I also have a firewire hard drive that I'm using to tranfer data from my PC to the Mac-it works just fine. Which leads me to believe somehow the camera isn't working with the Mac.
HOWEVER-I use a Digidesign Digi 002 rack attached to a firewire port on the back. The 002 has a passthrough firewire port on the back, so I hooked up the camera. Lo and behold, the Capture now works. But only by going through the 002.
I'd really like to be able to capture video by just plugging my camera inot the fron Firewire posts after I shoot some tape.
Does anybody have an idea why the front or rear firewire ports won't control or capture from my camera directly?
Thanks in advance for any help with this.
GregA couple of things to try…
1) Open a new user account and see if it works there
2) Reset PRAM and NVRAM…
http://docs.info.apple.com/article.html?artnum=2238
3) Reset the System Management Controller…
http://docs.info.apple.com/article.html?artnum=304123
4) Try your other Firewire ports
5) Boot off another drive and see if it's your software rather than possibly hardware -
I have a G4 with system 10.4.11 and a 6 pin firewire trying to transfer files to my new iMac system 10.8.3, 9 pin firewire. Apple sold me FireWire 9-6 with a Thunderbolt to FireWire Adapter. This will not work, do i need a different cable?
Apple Thunderbolt to FireWire Adapter
Then it sounds like the FW800 to 400 adapter just gets in the way. You don't have FW800 case? on my MDD G4 I added and used FW800 controller and cases from OWC and Sonnet.
http://www.macsales.com/firewire -
Do you have to setup a disk drive connected to a macbook or should it just work straight away when plugged in?
The Finder shouldn't show an empty optical drive. If the disk gets automatically ejected, there may be problems with the drive, or you may be inserting a blank CD or DVD into a drive incapable of burning it.
(77748) -
When I borrow a firewire cord, my iPod doesn't work
I was wondering if anyone else had to borrow a firewire cord and it won't work. I am not sure if it is a PC/Mac thing but I was wondering if anyone else had this issue?
You can look at the new pre-release version of Avast for Firefox 5.
* http://forum.avast.com/index.php?topic=80362.0 -
Suddenly my imessage and facetime stop working both for iphone4 and ipad, i tried possible online solutions but it didn't work. Message such as "could not connect, check your network connection" etc... Help please am getting frustrated here....
Have you tried re-booting your WiFi router ? It may seem OK on your PC, but a re-boot may help.
-
Fire fox crashes and freezes if i use it too much (kind of a good thing). For example if i use stumble fire fox will start to slow down then freeze completely. I am using windows XP pro and a pretty decent computer. All software is up to date and i do no have a virus. I have even tried to disable my add-ons and plug-ins but it did not make a difference. Does anyone have a solution or should i just switch to chrome?
Please provide a crash id -> https://developer.mozilla.org/en/How_to_get_a_stacktrace_for_a_bug_report
Do the issues still occur if you start Firefox in Safe Mode? http://support.mozilla.com/en-US/kb/Safe+Mode -
I dropped my iPhone 3G last day and soon after that the display turned too dim and it still remains the same.
Could anyone help me with a solution?
Should I change the display or is it a minor damage??
Thanks for your supportsounds like you broke the display when you dropped it. There's nothing we users here can do for you.
Since the iPhone warranty does not cover accidental damage, you will have to pay to have your phone repaired or replaced. You can bring it into Apple for an out of warranty exchange in the country of purchase, or you can find a 3rd party iPhone repair store in your area. -
If I was to upgrade to mavericks from 10.6.8 will my firewire on mackie onyx 1220 still work in logic 9?
You need to check the FAQ section on their website - there is a link contained to check on compatibility. Here is an excerpt:
I would guess that it might not be supported in Mavericks, but contact them to make sure. The second problem is that it's been discontinued.
Maybe you are looking for
-
I have an iMac G4 PowerPC with OS 10.5.? After deleting 17G of music files to make room on the 74G drive, The iPhoto and iWeb updates seemed to load okay, but the OS 10.5.8 update failed - message opened said the computer encountered an error and mus
-
Not sure if anyone else has noticed this. Since installing snow leopard I've found that when my iphone synchs with my mac the notes on the iphone, which with leopard were put into mail's notes folder, now also appear in the inbox. If you delete them
-
How to hide the default windows inherit menu bar
Dear All, I am using oracle Application server 10g with windows server 2003. with oracle 11g database. When ever I am accessing the application from client machine through browser i am getting the windows inherit menu bar at the top of the working sp
-
Hey, Im using iWebMore to use html. I tried it to make an iFrame, didnt work, tried to embed a YouTube video, didnt work. So I tried something simple such as: <@: Hello!<hr/>Bye :@> which will simply but Hello! over Bye with a line between them. Howe
-
Invoking servlet from server (tomcat 5.5) at regular interval
Hi all My problem is I want to send mail on 1st day of every month through form my application. But for that I don�t want to login my application. It should fire automatically from server. I am using Tomcat 5.5 for my application. This process also i