Firewire Solution? USB To Express Card Adapter Cable + Firewire Expresscard

Has anyone tried this as a possible solution for getting firewire on their macbook 13.3 unibody? In theory it would seem that you could use this USB To Express Card Adapter Cable and plug in a firewire expesscard. Anyone tried it?
http://usb.brando.com.hk/mini-usb-to-express-card-adapter-cable_p00783c042d015.h tml

Also... as they went through the trouble to specifically indicate the compatible cards, I would imagine there are known incompatibilities with other card types. None of the cards they list would have difficulty over USB. Each of these cards already have similar counterparts that are available to connect directly to USB (vs. using an express card). This would seem most useful for people that may already have express cards that they use in other notebooks so they could use them in a machine without an express card slot... otherwise I would imagine people would just get the USB versions of these devices. USB hubs can obviously connect directly to a USB port, memory card readers are also available for connecting directly to a USB port. RS232 is pretty dated and USB can easily handle RS 232 throughput. I'm not exactly sure what a printer card is... but printers generally connect via USB (or parallel in older machines)... again... very easy for USB to handle. In order for it to work with firewire, they would have to have a hardware translator built into it. I'm sure they would list firewire if it was an option.

Similar Messages

USB to Express Card adapter/Express Card to Firewire

Macbook Air October 2010.
Comes with two USB 2.0 ports
Can I do the following?
- Connect USB to Express Card adapter
- Connect the Express Card port to a Firewire adapter
- Connect MiniDV camcorder to Firewire port

Also... as they went through the trouble to specifically indicate the compatible cards, I would imagine there are known incompatibilities with other card types. None of the cards they list would have difficulty over USB. Each of these cards already have similar counterparts that are available to connect directly to USB (vs. using an express card). This would seem most useful for people that may already have express cards that they use in other notebooks so they could use them in a machine without an express card slot... otherwise I would imagine people would just get the USB versions of these devices. USB hubs can obviously connect directly to a USB port, memory card readers are also available for connecting directly to a USB port. RS232 is pretty dated and USB can easily handle RS 232 throughput. I'm not exactly sure what a printer card is... but printers generally connect via USB (or parallel in older machines)... again... very easy for USB to handle. In order for it to work with firewire, they would have to have a hardware translator built into it. I'm sure they would list firewire if it was an option.

Express card adapter for NI Express Card 8360

Hi All,
I am trying to find a USB or Firewire or eSATA or PCMICIA to express card adapter for my laptop (DELL Latitude E6400) to connect an NI Express card 8360.
I have searched for adapters but they are all based on USB2.0 technology but the link below seems to suggest that USB based adapters wont work.
http://digital.ni.com/public.nsf/allkb/B5E9398279914984862574F700049847
I was wondering if any of you had the same issue and got it to work one way or the other?
The idea is to use the express card to communicate to a NI PXI-1033 PXI rack.
thanks and regards,
ace
Beginner? Try LabVIEW Basics
Sharing bits of code? Try Snippets or LAVA Code Capture Tool
Have you tried Quick Drop?, Visit QD Community.

Hi ace,
There isn't really anything I can add to this issue except to echo what it said in that link. NI don't manufacture such adapters so I can't recommend any, hopefully someone else has had some experience with this and can offer some advice on the issue.
Kind Regards,
Jas.W
Jason W.
Applications Engineer
National Instruments UK & Ireland

Sony DCR-HC62 camcorder won't connect to iMovie with express card adapter

I got a Sony HC62 Mini DV video camera but it will not connect to iMovie. Since I don't have a firewire 6 pin on my Mac (only a 9 pin) i got an express card adapter. So I am using 4 pin (camera) to 6 pin (Express card) firewire. I have no other devices to test the express card but i tested the firewire and the video camera that I got and it works fine with a Windows XP computer. I have also talked with sony and I ended up with either there is something wrong with the express card or the iMovie software.

Well there is nothing there because the express card is listed under a PCI card. The express card is recognized when inserted but that is it will not notice the camera attached to the express card. since i couldn't test the card i went and got the card replaced, but still with no luck.
Would returning the express card and buying a firewire 4 pin to 9 pin be worth it? (given that i can get one since i can only find one company that makes them and they are a wholesales only) This way i can connect it directly to my mac's firewire 9 pin port.

Spectrum Expert - USB or Express Card

The Spectrum Expert is a great tool but the problem is to find a notebook with a PC-Card / PCMCIA slot.
I know that there are adapters available for EC to PC-Card but I think this is not a solution for customers.
I didn't find any information on the Cisco website about an alternative.
Question: When will be a Spectrum Expert Card available with USB or EC connector?

Hi Irina and Scott,
I know the AP SE-Connect feature but we need a portable solution.
Cisco should think about a USB or Express Card solution.
The APs are working with the Spectrum Expert and it will be hard to explain to a customer that he should use a 3rd party solution to get a mobile solution.
Thanks and best regards,
Carsten

T400 & T500 Express Card Adapter Malfunction

I purchased an express card to compact flash adapter for use with my T400 running Windows 7. My machine will not recognize the express card or the compact flash and sometimes the machine will hang up when I insert the express card. I also tried the express card adapter in a T500 running Windows 7 with the same result. Has any one had this problem and how did you resolve it? I have looked for new drivers and haven't found any.

Re: Reading SDHC drives on the T400/T500.
Isn't there a separate slot specifically for SD drives right below the express card slot on your machine? If so, you don't need to use an express adapter to read the SDHC drive, just plug the SD drive. My T400 works fine when I use that slot with an SD drive. The laptop just doesn't recognize an express card. Since my Canon EOS 7 camera uses compact flash drives, I need to either use an express card adapter or a USB adapter. The USB to compact flash adapter works fine, but I hate to have a dongle hanging out of the computer that can break off. It would be so much better to use the express card adapter which mostly fits into the laptop.
Until Lenovo eliminated the PCMCIA slot, I used to use a PCMCIA adapter with a compact flash drive. This combination completely fit inside the laptop and funtioned well on these laptops: A21p, T40, and T60. But computer people can't ever leave things that work well alone. Now that I have the more advanced T400, I can't use the PCMCIA adapter and the express card adapter card doesn't work. PROGRESS.

USB or Express card so

Hi,
I've got a notebook which I use for gaming and I was hoping to get a USB or express card sound card in order to improve my sound quality and take the sound processing load off of the CPU while gaming. If I understand it correctly the x-fi expresscard doesn't actually do any sound processing it's self (it is all still done by the CPU). Does creative have any other USB or express card soundcards which actually have a dedicated processing chip?

remisbowman, Welcome to the discussion area!
Neither the AirPort Express (AX) nor the AirPort Extreme base station (AEBS) support any type of USB modems, USB networking card, nor USB networking in general.
It won't work.

R61i USB 3.0, 54mm EXPRESS CARD adapter

Hi there again.
After doing all the possible upgrades on my laptop ThinkPad R61i TYPE 7650-D7G 15.4in,
I have this problem with the Express Card slot.
I've bought this 54mm USB 3.0 express card but when I stick it into the slot it doesn't seem to fit. It just gets into the slot without "locking" anywhere.
So my question is this. Is there something wrong with my card (new buy) or doesn't my laptop accept such a card?
Is it just a CardBus slot? And if so, is there a way (adapter, hardware) to use my USB 3.0 Express Card?
Here's a photo of the card I bought. This cable came with the Express Card. Don't really know what it's for... It seems that one end goes into the slot between the Card's 2 usb slots.
Link to image
Thanx a lot.
just found this... would this work or won't i get the actual usb 3.0 speed?
http://www.amtron.com/expresscard/cbexp34a.htm
Moderator comment: Image(s) >50KB converted to link(s). Community Rules.

To answer the question in your first post, the USB cable that came with the ExpressCard was for power. The other end would have connected to one of your laptop's existing USB ports. You would've used that for certain devices which required more power, in which case you would've only gained 1 USB 3.0 port, not 2
The picture of your laptop (with the "O" on the eject button) means you definitely have a CardBus PC Card slot, not an ExpressCard slot. You won't be able to use that ExpressCard. PC Card, also referred to as PCMCIA card, is an older, slower technology. As you now realize, a 68-pin Cardbus PC card will fit that slot. If your objective is to gain extra USB ports, your best bet is to return that ExpressCard and search for "usb pc card" online. There are PC Cards which provide 2 USB ports or even 4 USB ports. However, you will be limited to USB 2.0 speeds. Yes, you could use a CardBus-to-ExpressCard Adapter but, once again, you will be limited to USB 2.0 speeds. (Also note the one you link to in your first post converts PC Card to ExpressCard/34 only). An even more inexpensive solution may be a "USB port hub."
Basic comparison/ diagrams and size charts of PC Card, ExpressCard/34 and ExpressCard/54 here: http://en.wikipedia.org/wiki/ExpressCard
Have a great day. (I do not work for Lenovo)

FireWire Solutions are available -- Express Card add-ons

For everyone concerned about the lack of FireWire, the MacBook's ExpressCard slot will support FireWire upgrade cards that will allow for device connectivity. Granted they probably will not support Target Disk Mode, but at least regular functionality will be there.
http://www.sonnettech.com/product/fwusbexpresscard34.html
I expect more companies will put out FireWire express card solutions, but there are some now for users that need it.

Nevermind....there is no ExpressCard slot on the MacBook...got it mixed up with the Pro...grr...

USB/eSata express card not working on stock kernel

Hello everyone,
I have a weird problem and I don't seem to find any solution by myself. Let me give you some background info on what I plan to do.
I purchased an express card to eSata/USB 3.0 adapter and want to make it work on my laptops. Precisely, it is this card: http://www.amazon.de/Notebook-Express-C … B007F8TXZ8
1: Lenovo X200s (1,6GHz) running Ubuntu 14.04 amd64
2: Lenovo X200s (1,6GHz) running Debian 7 amd64
3: Lenovo X200T (1,6GHz) running ArchLinux amd64
The card does work fine only on the Ubuntu machine. I would like to make it run on the two other ones as well. I thought I might get help here getting it to work on machine 3 and then transfer the results to machine 2. What really matters to me is eSata, btw, I do not even have a USB 3.0 device to test with.
First of all, here's what happens when I plug the card into machine 1:
user@1-ubuntu:~$ uname -r
3.13.0-39-generic
user@1-ubuntu:~$ dmesg | tail -n 44 # that's where it begins
[ 1953.576472] pciehp 0000:00:1c.3:pcie04: Card present on Slot(3)
[ 1953.728077] pci 0000:05:00.0: [1b21:1042] type 00 class 0x0c0330
[ 1953.728119] pci 0000:05:00.0: reg 0x10: [mem 0x00000000-0x00007fff 64bit]
[ 1953.728304] pci 0000:05:00.0: PME# supported from D3hot
[ 1953.736062] pci 0000:05:00.0: BAR 0: assigned [mem 0xf0000000-0xf0007fff 64bit]
[ 1953.736087] pcieport 0000:00:1c.3: PCI bridge to [bus 05-0c]
[ 1953.736092] pcieport 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
[ 1953.736098] pcieport 0000:00:1c.3: bridge window [mem 0xf0000000-0xf1ffffff]
[ 1953.736104] pcieport 0000:00:1c.3: bridge window [mem 0xf2900000-0xf29fffff 64bit pref]
[ 1953.736133] pci 0000:05:00.0: no hotplug settings from platform
[ 1953.736143] pci 0000:05:00.0: enabling device (0000 -> 0002)
[ 1953.736398] xhci_hcd 0000:05:00.0: xHCI Host Controller
[ 1953.736406] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 9
[ 1953.743621] xhci_hcd 0000:05:00.0: irq 46 for MSI/MSI-X
[ 1953.743629] xhci_hcd 0000:05:00.0: irq 49 for MSI/MSI-X
[ 1953.743635] xhci_hcd 0000:05:00.0: irq 50 for MSI/MSI-X
[ 1953.743784] usb usb9: New USB device found, idVendor=1d6b, idProduct=0002
[ 1953.743788] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1953.743791] usb usb9: Product: xHCI Host Controller
[ 1953.743794] usb usb9: Manufacturer: Linux 3.13.0-39-generic xhci_hcd
[ 1953.743796] usb usb9: SerialNumber: 0000:05:00.0
[ 1953.743973] hub 9-0:1.0: USB hub found
[ 1953.743990] hub 9-0:1.0: 2 ports detected
[ 1953.744147] xhci_hcd 0000:05:00.0: xHCI Host Controller
[ 1953.744153] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 10
[ 1953.744218] usb usb10: New USB device found, idVendor=1d6b, idProduct=0003
[ 1953.744221] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1953.744224] usb usb10: Product: xHCI Host Controller
[ 1953.744227] usb usb10: Manufacturer: Linux 3.13.0-39-generic xhci_hcd
[ 1953.744229] usb usb10: SerialNumber: 0000:05:00.0
[ 1953.744366] hub 10-0:1.0: USB hub found
[ 1953.744383] hub 10-0:1.0: 2 ports detected
[ 1954.447851] usb 10-1: new SuperSpeed USB device number 2 using xhci_hcd
[ 1954.460505] usb 10-1: Parent hub missing LPM exit latency info. Power management will be impacted.
[ 1954.461215] usb 10-1: New USB device found, idVendor=174c, idProduct=5106
[ 1954.461219] usb 10-1: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[ 1954.461222] usb 10-1: Product: AS2105
[ 1954.461225] usb 10-1: Manufacturer: ASMedia
[ 1954.461228] usb 10-1: SerialNumber: 00000000000000000000
[ 1954.463146] usb-storage 10-1:1.0: USB Mass Storage device detected
[ 1954.463279] scsi7 : usb-storage 10-1:1.0
[ 1955.460385] scsi 7:0:0:0: Direct-Access ASMT 2105 0 PQ: 0 ANSI: 5
[ 1955.465099] sd 7:0:0:0: Attached scsi generic sg1 type 0
[ 1955.466483] sd 7:0:0:0: [sdb] Attached SCSI removable disk
I wouldn't know of any attached disks, and neither does it show up. Note that it is only the card I plugged in, no hard drive attached to it.
hburg1234@packrehsel:~$ lspci -k
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
Subsystem: Lenovo Device 20e0
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
Subsystem: Lenovo Device 20e4
Kernel driver in use: i915
00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
Subsystem: Lenovo Device 20e4
00:03.0 Communication controller: Intel Corporation Mobile 4 Series Chipset MEI Controller (rev 07)
Subsystem: Lenovo Device 20e6
Kernel driver in use: mei_me
00:03.3 Serial controller: Intel Corporation Mobile 4 Series Chipset AMT SOL Redirection (rev 07)
Subsystem: Lenovo Device 20ec
Kernel driver in use: serial
00:19.0 Ethernet controller: Intel Corporation 82567LM Gigabit Network Connection (rev 03)
Subsystem: Lenovo Device 20ee
Kernel driver in use: e1000e
00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03)
Subsystem: Lenovo Device 20f0
Kernel driver in use: uhci_hcd
00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03)
Subsystem: Lenovo Device 20f0
Kernel driver in use: uhci_hcd
00:1a.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03)
Subsystem: Lenovo Device 20f0
Kernel driver in use: uhci_hcd
00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03)
Subsystem: Lenovo Device 20f1
Kernel driver in use: ehci-pci
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
Subsystem: Lenovo Device 20f2
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03)
Kernel driver in use: pcieport
00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03)
Kernel driver in use: pcieport
00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 03)
Kernel driver in use: pcieport
00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03)
Subsystem: Lenovo Device 20f0
Kernel driver in use: uhci_hcd
00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03)
Subsystem: Lenovo Device 20f0
Kernel driver in use: uhci_hcd
00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03)
Subsystem: Lenovo Device 20f0
Kernel driver in use: uhci_hcd
00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03)
Subsystem: Lenovo Device 20f1
Kernel driver in use: ehci-pci
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93)
00:1f.0 ISA bridge: Intel Corporation ICH9M-E LPC Interface Controller (rev 03)
Subsystem: Lenovo Device 20f5
Kernel driver in use: lpc_ich
00:1f.2 SATA controller: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 4 port SATA Controller [AHCI mode] (rev 03)
Subsystem: Lenovo Device 20f8
Kernel driver in use: ahci
00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03)
Subsystem: Lenovo Device 20f9
03:00.0 Network controller: Intel Corporation PRO/Wireless 5100 AGN [Shiloh] Network Connection
Subsystem: Intel Corporation WiFi Link 5100 AGN
Kernel driver in use: iwlwifi
05:00.0 USB controller: ASMedia Technology Inc. ASM1042 SuperSpeed USB Host Controller
Subsystem: Device 174c:2104
Kernel driver in use: xhci_hcd
The last one seems to be important to me, so here's a verbose output on that one.
user@1-ubuntu:~$ lspci -v | tail -n 8
05:00.0 USB controller: ASMedia Technology Inc. ASM1042 SuperSpeed USB Host Controller (prog-if 30 [XHCI])
Subsystem: Device 174c:2104
Physical Slot: 3
Flags: bus master, fast devsel, latency 0, IRQ 19
Memory at f0000000 (64-bit, non-prefetchable) [size=32K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
user@1-ubuntu:~$ sudo udevadm monitor -k
monitor will print the received events for:
KERNEL - the kernel uevent
KERNEL[2585.956558] add /devices/pci0000:00/0000:00:1c.3/0000:05:00.0 (pci)
KERNEL[2585.972086] add /devices/pci0000:00/0000:00:1c.3/0000:05:00.0/usb9 (usb)
KERNEL[2585.972116] add /devices/pci0000:00/0000:00:1c.3/0000:05:00.0/usb9/9-0:1.0 (usb)
KERNEL[2585.975736] add /devices/pci0000:00/0000:00:1c.3/0000:05:00.0/usb10 (usb)
KERNEL[2585.975763] add /devices/pci0000:00/0000:00:1c.3/0000:05:00.0/usb10/10-0:1.0 (usb)
KERNEL[2586.689218] add /devices/pci0000:00/0000:00:1c.3/0000:05:00.0/usb10/10-1 (usb)
KERNEL[2586.690935] add /devices/pci0000:00/0000:00:1c.3/0000:05:00.0/usb10/10-1/10-1:1.0 (usb)
KERNEL[2586.695723] add /devices/pci0000:00/0000:00:1c.3/0000:05:00.0/usb10/10-1/10-1:1.0/host9 (scsi)
KERNEL[2586.695757] add /devices/pci0000:00/0000:00:1c.3/0000:05:00.0/usb10/10-1/10-1:1.0/host9/scsi_host/host9 (scsi_host)
KERNEL[2587.692633] add /devices/pci0000:00/0000:00:1c.3/0000:05:00.0/usb10/10-1/10-1:1.0/host9/target9:0:0 (scsi)
KERNEL[2587.692667] add /devices/pci0000:00/0000:00:1c.3/0000:05:00.0/usb10/10-1/10-1:1.0/host9/target9:0:0/9:0:0:0 (scsi)
KERNEL[2587.692691] add /devices/pci0000:00/0000:00:1c.3/0000:05:00.0/usb10/10-1/10-1:1.0/host9/target9:0:0/9:0:0:0/scsi_disk/9:0:0:0 (scsi_disk)
KERNEL[2587.692708] add /devices/pci0000:00/0000:00:1c.3/0000:05:00.0/usb10/10-1/10-1:1.0/host9/target9:0:0/9:0:0:0/scsi_device/9:0:0:0 (scsi_device)
KERNEL[2587.692824] add /devices/pci0000:00/0000:00:1c.3/0000:05:00.0/usb10/10-1/10-1:1.0/host9/target9:0:0/9:0:0:0/scsi_generic/sg1 (scsi_generic)
KERNEL[2587.692898] add /devices/pci0000:00/0000:00:1c.3/0000:05:00.0/usb10/10-1/10-1:1.0/host9/target9:0:0/9:0:0:0/bsg/9:0:0:0 (bsg)
KERNEL[2587.699636] add /devices/virtual/bdi/8:16 (bdi)
KERNEL[2587.699771] add /devices/pci0000:00/0000:00:1c.3/0000:05:00.0/usb10/10-1/10-1:1.0/host9/target9:0:0/9:0:0:0/block/sdb (block)
KERNEL[2587.703694] change /devices/pci0000:00/0000:00:1c.3/0000:05:00.0/usb10/10-1/10-1:1.0/host9/target9:0:0/9:0:0:0/block/sdb (block)
KERNEL[2587.709178] change /devices/pci0000:00/0000:00:1c.3/0000:05:00.0/usb10/10-1/10-1:1.0/host9/target9:0:0/9:0:0:0/block/sdb (block)
Apart from the supposedly found block device (can't judge) I am not sure if there is anything that is really eSata specific and not USB 3.0 related.
So far what I think I can tell from the output is that the modules
pciehp pci pcieport
seem to be dealing with the express card as such whereas
xhci_hcd
takes care of USB 3.0. I cannot see any clear reference to the eSata connector, which might not be surprising if the bus is just passed through (again: not sure).
For completeness' sake here comes the output of
user@1-ubuntu:~$ lsmod | tee before
Module Size Used by
ctr 13049 1
ccm 17773 1
pci_stub 12622 1
vboxpci 23194 0
vboxnetadp 25670 0
vboxnetflt 27613 0
vboxdrv 339502 3 vboxnetadp,vboxnetflt,vboxpci
cuse 13445 3
dm_crypt 23177 1
btusb 32412 0
cdc_ether 14351 0
usbnet 43913 1 cdc_ether
cdc_acm 28803 0
mii 13934 1 usbnet
cdc_wdm 19053 0
rfcomm 69160 8
bnep 19624 2
bluetooth 391136 22 bnep,btusb,rfcomm
binfmt_misc 17468 1
coretemp 13435 0
kvm_intel 143148 0
kvm 451729 1 kvm_intel
thinkpad_acpi 81013 0
nvram 14411 1 thinkpad_acpi
serio_raw 13462 0
arc4 12608 2
snd_seq_midi 13324 0
snd_seq_midi_event 14899 1 snd_seq_midi
snd_hda_codec_conexant 57441 1
iwldvm 232285 0
snd_hda_intel 56451 3
mac80211 630653 1 iwldvm
snd_hda_codec 192906 2 snd_hda_codec_conexant,snd_hda_intel
snd_hwdep 13602 1 snd_hda_codec
snd_rawmidi 30144 1 snd_seq_midi
lpc_ich 21080 0
iwlwifi 169932 1 iwldvm
snd_seq 61560 2 snd_seq_midi_event,snd_seq_midi
snd_pcm 102099 2 snd_hda_codec,snd_hda_intel
mei_me 18627 0
cfg80211 484040 3 iwlwifi,mac80211,iwldvm
snd_page_alloc 18710 2 snd_pcm,snd_hda_intel
mei 82276 1 mei_me
snd_seq_device 14497 3 snd_seq,snd_rawmidi,snd_seq_midi
snd_timer 29482 2 snd_pcm,snd_seq
snd 69322 17 snd_hwdep,snd_timer,snd_hda_codec_conexant,snd_pcm,snd_seq,snd_rawmidi,snd_hda_codec,snd_hda_intel,thinkpad_acpi,snd_seq_device,snd_seq_midi
soundcore 12680 1 snd
parport_pc 32701 0
ppdev 17671 0
mac_hid 13205 0
tp_smapi 28367 0
thinkpad_ec 14449 1 tp_smapi
lp 17759 0
parport 42348 3 lp,ppdev,parport_pc
i915 783961 2
psmouse 106714 0
ahci 25819 3
libahci 32716 1 ahci
i2c_algo_bit 13413 1 i915
e1000e 254433 0
drm_kms_helper 55071 1 i915
drm 303102 3 i915,drm_kms_helper
ptp 18933 1 e1000e
pps_core 19382 1 ptp
video 19476 1 i915
wmi 19177 0
and a list of the newly loaded modules:
user@1-ubuntu:~$ diff before <(lsmod)
1a2
> usb_storage 62209 0
Now, on my Arch machine the situation is as follows when the card is plugged in:
user@3-arch:~$ uname -r
3.17.2-1-ARCH
user@3-arch:~$ sudo udevadm monitor -k
monitor will print the received events for:
KERNEL - the kernel uevent
user@3-arch:~$ lsmod
Module Size Used by
sr_mod 21903 0
cdrom 47479 1 sr_mod
hid_generic 12393 0
usbhid 48603 0
hid 102220 2 hid_generic,usbhid
cdc_ether 12564 0
usbnet 34978 1 cdc_ether
cdc_acm 30362 0
cdc_wdm 17427 0
mii 12675 1 usbnet
ctr 12927 0
ccm 17534 0
fuse 87410 3
joydev 17063 0
wacom_w8001 12706 0
serport 12842 1
mousedev 17272 0
iTCO_wdt 12831 0
iTCO_vendor_support 12649 1 iTCO_wdt
coretemp 12820 0
kvm 417429 0
pcspkr 12595 0
psmouse 107214 0
evdev 21544 20
mac_hid 12633 0
serio_raw 12849 0
i2c_i801 16965 0
snd_hda_codec_conexant 21835 1
snd_hda_codec_generic 63126 1 snd_hda_codec_conexant
arc4 12536 2
iwldvm 184847 0
mac80211 604456 1 iwldvm
i915 905750 2
lpc_ich 20768 0
iwlwifi 156837 1 iwldvm
snd_hda_intel 26387 0
snd_hda_controller 26938 1 snd_hda_intel
cfg80211 445286 3 iwlwifi,mac80211,iwldvm
thinkpad_acpi 69074 0
e1000e 215686 0
snd_hda_codec 108536 4 snd_hda_codec_conexant,snd_hda_codec_generic,snd_hda_intel,snd_hda_controller
drm_kms_helper 80934 1 i915
shpchp 35210 0
snd_hwdep 17244 1 snd_hda_codec
snd_pcm 88487 3 snd_hda_codec,snd_hda_intel,snd_hda_controller
ptp 17692 1 e1000e
pps_core 17225 1 ptp
snd_timer 26614 1 snd_pcm
wmi 17339 0
drm 259106 4 i915,drm_kms_helper
nvram 13034 1 thinkpad_acpi
thermal 17559 0
snd 73436 8 snd_hwdep,snd_timer,snd_hda_codec_conexant,snd_pcm,snd_hda_codec_generic,snd_hda_codec,snd_hda_intel,thinkpad_acpi
soundcore 13031 2 snd,snd_hda_codec
led_class 12859 2 iwldvm,thinkpad_acpi
rfkill 18867 3 cfg80211,thinkpad_acpi
ac 12715 0
hwmon 12930 2 coretemp,thinkpad_acpi
acpi_cpufreq 17218 1
battery 17452 0
i2c_algo_bit 12744 1 i915
mei_me 17900 0
tpm_tis 17182 0
i2c_core 50152 5 drm,i915,i2c_i801,drm_kms_helper,i2c_algo_bit
tpm 31467 1 tpm_tis
mei 75079 1 mei_me
intel_agp 17432 0
intel_gtt 17848 3 i915,intel_agp
video 18043 1 i915
processor 27777 3 acpi_cpufreq
button 12953 1 i915
sch_fq_codel 17343 6
tp_smapi 27621 0
thinkpad_ec 12813 1 tp_smapi
ext4 497696 3
crc16 12343 1 ext4
mbcache 17171 1 ext4
jbd2 86417 1 ext4
sha256_ssse3 25692 2
sha256_generic 16804 1 sha256_ssse3
ecb 12737 0
cbc 12696 1
algif_skcipher 17051 0
af_alg 12988 1 algif_skcipher
dm_crypt 22551 1
dm_mod 93490 15 dm_crypt
sd_mod 44398 3
crct10dif_generic 12581 1
crc_t10dif 12431 1 sd_mod
crct10dif_common 12356 2 crct10dif_generic,crc_t10dif
atkbd 22254 0
libps2 12739 2 atkbd,psmouse
ata_generic 12490 0
ahci 33291 2
libahci 27158 1 ahci
pata_acpi 12771 0
uhci_hcd 43507 0
ehci_pci 12512 0
ehci_hcd 69939 1 ehci_pci
libata 181518 4 ahci,pata_acpi,libahci,ata_generic
usbcore 199381 9 uhci_hcd,ehci_hcd,ehci_pci,usbhid,usbnet,cdc_acm,cdc_wdm,cdc_ether
usb_common 12440 1 usbcore
scsi_mod 147543 3 libata,sd_mod,sr_mod
i8042 18002 1 libps2
serio 18282 9 serio_raw,atkbd,i8042,serport,wacom_w8001,psmouse
Sticking to my suspicion that this might just be a USB related issue and eSata might still work due to some sort of passthrough, I attached the very eSata drive that I could mount on Ubuntu. It did not work.
I then researched and found this blog post: http://okomestudio.net/biboroku/?p=1360
So I downloaded the pkgbuild for the arch linux core kernel and checked the config. It matched the recommendations.
Another hint I found was to unload acpiphp and force-reload it. However, this tip does not seem to apply to the arch kernel:
[user@3-arch:~$ sudo rmmod acpiphp
rmmod: ERROR: Module acpiphp is builtin.
Anyone any idea on how to make the card work?
Thank you!
Last edited by archery1234 (2014-11-15 10:46:35)

For anyone else seeking help on that: Card slot was deactivated in 2/3 Bioses.

USB PCI-Express Card half working???

I just purchased and installed a SYBA PCI-Express USB 2.0 5 Ports Controller Card (Model SD-PEX-NEC5U) http://www.newegg.com/Product/Product.aspx?Item=N82E16812186010&Tpk=SD-PEX-NEC5U
I think it's half-way working. I did some researching prior to my purchase and I was under the impression that the Mac Pro (2006) could accept any PCI-express card. I have my Kensington USB bluetooth adapter plugged in (to the internal port) and it powers the adapter light and both my wireless mouse and wireless keyboard work perfectly. However any of the devices I plugged into the rear 4 ports are not working... (ie my Western Digital 1 TB hard drive that has 2 partitions on - one for Time machine backups and one for regular storage)
According to the Syba website, Mac OSX is not listed as a supported OS. The card came with a drivers disc but doesn't have any Syba drivers on it... tons of other manufacturers.
Can anyone offer advice about installing drivers or "adding hardware" (a la Windows)? Again, it's working with my bluetooth... so whats up with my hard drive?

A safe place to check and start your research is OWC.
http://eshop.macsales.com/shop/firewire/add-ons-and-hubs/pci-pcmcia-cards
As for MyBook - they can be iffy; if a drive fails, it is built into the case, so I prefer to buy cases with USB/FW and that you can install a drive yourself, even if comes with one.
USB: when there is FireWire and you can easily add SATA PCIe, yes they cost more but then they can drive multiple drives at full performance too.
When you buy generic cards, see if they use the same chipset as found in Sonnet Allegro and others.
Then check
http://www.xlr8yourmac.com/ for reports in their upgrade database and articles.
And no, it requires PCIe, but not just any (and even PC with Windows 7, some cards can also be problem).

Install usb 3 express card

I installed a Rocketfish usb express card today. The instructions say to connect a 4 pin floppy power plug onto it. My computer has this plug, but the wires don't reach to the usb card. The card still works without this plug connected anyway. ( I'm a little disappointed though, it's only about twice as fast as the usb 2) Will this be OK without the power plug connected?
Solved!
Go to Solution.

john54981 wrote:
I'm a little disappointed though, it's only about twice as fast as the usb 2
I had a similar experience (2x).
I got myself USB3 expresscard on my laptops. You really notice the performance change on quad core compared to my dual core..

Express Card adapter

I'm upgrading my MBP to a new model that hasn't got the ExpressCard. I'd like to use my UAD-2 Solo laptop (http://www.uaudio.com/uad-plug-ins/pcie/uad-2-solo-laptop.html) and I'm looking for an adapter. As UAD customer support suggested, I need a Thunderbold adapter since USB is too slow. This seems to be the only one compatible: https://secure1.sonnettech.com/product_info.php?&products_id=392&osCsid=906042ed 7e4c8b8ca3ad40f517544be2
Any ideas?
Thank you

A client of mine has that adaptor and has told me it works great with his UAD-2 Solo...
However, I thought he bought the Pro version and not the standard one that you posted the link to... I could be wrong however and I am unable to contact him at the moment to confirm...as he is on tour in the Middle East.. so best to double check that yourself, just in case.
He tried an FW800 one initially.. I think it was the 2Port FW800 Expresscard34 and it was a complete no go with the newer MBPs... hence his research and the purchase of the Sonnet one..

Att express card, novatel usb adapter, macbook

Hi -
I'm trying to set up an ATT express card (GT3.6 express card) to use with Novatel USB express card adapter for a Macbook. I can get the card to work in the express card slot of my Macbook Pro, but the Macbook (doesn't has an express card slot) is not recognizing the usb adapter. Any suggestions?
Thanks

It appears that the Novatel Express Card Adapter is meant to be used with the Novetel Express Card. I'm not sure that the AT&T Express Card will work with it.
As an alternative, several of the providers now have a USB Modem that needs no adapter. You might look into those.

802.11N USB/Express Cards

Hi. I have 2 minis, an iMac G5 and a MacBook Pro Core Duo...none of which have 802.11N capabilities. I would like to find external wireless cards that are USB and express card based that will work with OS X. Does anyone have a recommendation?

Yes, check out QuickerTek.

Firewire Solution? USB To Express Card Adapter Cable + Firewire Expresscard

Similar Messages

Maybe you are looking for