Firewire/USB audio device not working post 10.10.2 upgrade

I have an M-Audio FastTrack Pro and and Echo AudioFire2, both of which worked fine, until I updated to 10.10.2. Any ideas what's being done to FIX THE PROBLEM? Or workarounds?

It's worth trying because it just takes a minute, IMO.
PRAM stores speaker volume among other things.
They include:
Status of AppleTalk
Serial Port Configuration and Port definition
Alarm clock setting
Application font
Serial printer location
Autokey rate
Autokey delay
Speaker volume
Attention (beep) sound
Double-click time
Caret blink time (insertion point rate)
Mouse scaling (mouse speed)
Startup disk
Menu blink count
Monitor depth
32-bit addressing
Virtual memory
RAM disk
Disk cache

Similar Messages

Usb audio devices not working

just updated to os x mavericks only to find my Roland fa 101(firewire soundcard) and my Access Virus Ti (usb synth /sound device) (running cubase studio 4 ) are not working ,had a quick read up and as far as I can tell its something todo with CoreAudio2 and class 2 USB sound devices ,I was wondering if apple are planning to fix this issue asap as I need this kit working ,
Cheers

Hey man, there are a bunch of us with the exact same problem!
The recent 10.4.10 update has totally F**D up our alesis interfaces,
we are P**D off and apple hasnt even acknowledged a problem. The is a longer thread you need to check out here:
http://discussions.apple.com/thread.jspa?messageID=4884775&#4884775
All we can do is complain to apple and wait. It S**KS bad.
But, there are heaps of us who are outraged. you can make a complaint to apple here:
http://www.apple.com/feedback/garageband.html
or here: http://www.apple.com/feedback/mac/tm.html
I encourage you to complain man, they need to know!

No sound and audio device not working properly, T61 vista

I unistalled the audio device SoundMax integrated HD audio because I had problems getting the mic of my new webcam (Logitech pro 9000) to work. But after reinstalling the SoundMax audio driver the audio device is no longer working.
Installing the SoundMax driver doesn't report any problems and the device manger also says that the SoundMax integrated digital hd audio device is working properly. But the speaker icon on the taskbar is crossed out. When hovering the mouse over the speaker icon it says Volume: 0 SoundMax integrated digital hd audio. When opening the Volume Mixer it says "No audio decivice is installed"...
I've completly removed all drivers and reinstalling several times but I cannot get it to work so I really need some help now.
All software + drivers regarging the webcam has been completly removed.
System data:
T61, Vista business
Audio chip seems to be a Analog Devices 1984
SoundMax driver version 6.10.1.5510 (latest available from lenovo)

Really silly bug, but there are times with the T series laptops, specifically the T61s that seem to not project the sound through the speakers and the way to fix it is to just keep hitting the silver volume buttons up by your power button on the actual laptop. This may or may not work for you, but I literally just got done with this on a T61 running a fresh installation of XP. The buttons on the lenovo itself control the direct signal input and do a very poor job with integrating with Windows Vista and XP.
Let me know if that works for you.

USB Audio Interface not working anymore

I have a Presonus Audiobox USB Audio Interface. Worked perfectly until I updated to Mavericks, now I get a screeching noise when used and the sound switches to the built in Mac sound.
So then I reboot and it does it again. The Audio box doesnt have any software since its a plug and play. Any help?

Hi ketpiano!
I have an article here for you that may help you resolve this issue:
Macintosh: Solutions for noise in the audio signal
http://support.apple.com/kb/HT2743
Thanks for using the Apple Support Communities!
Cheers,
Braden

External USB keyboard does not work with T60 after BIOS upgrade

External USB keyboard does not work properly with T60 after 2.26-1.07 BIOS upgrade.
It does the same with or without the docking station.
Anyone else bumped into this problem yet?
Has someone found any fixes for this?
t

Hi and welcome the forum!
Try uninstalling all USB hub devices from the device manager and reinstalling them again, particularly the keyboard's.
v2.26 is supposed to fix the issue according to lenovo:- http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-63024
Hope it helps.
Maliha (I don't work for lenovo)
ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
IdeaPad: U350
Apple:- Macbook Air [Snow Leopard]
Did someone help you today? Compliment them with a Kudos!
Was your question answered today? Mark it as an Accepted Solution!
Lenovo Deutsche Community Lenovo Comunidad en Español
Visit my YouTube Channel

USB Audio Device Not Recognized by Stream 7 tablet

Half the reason I bought the Stream 7 was to use it has a music player with my iBaso D2 USB Audio DAC Headdphone Amp.
The device is recognnized by my Win 8.1 desktop and every other computer I've plugged it into. Why it is not recognized as an audio playback device is beyond me. I've tried all of the suggestions that I've been able to find on the net without any luck. Is therte some reason why this function has been disabled on the Strwea 7?
This question was solved.
View Solution.

Problem Solved!
It turned out to be a combination of the usb cable and the OTG USB hub. On my desktop the iBaso was cable specific as to the device being recognized. When I tried the working cable witht the OTG hub on the Stream 7 it failed as usual. But when I tried the cheap monoprice adapter it worked.
The usb audio solves the horrible sound problem with the Stream 7 for anybody who is lookiing for a Fix.
The OTG hub works with a mouse and a mSata drive perfectly but not with the iBAso DAC.
Thanks to everyone who replied for keeping me trying.

Yamaha XG-AC Audio device not working after SP2 for XP was installed

Hi,
i'm new in this forum and maybe my question is a stupid one but i'm not able to solve this problem.
My Satellite 5200-801 doesn't make any sound after i've installed SP2 for XP. I tried to find a new driver for Yamaha XG-AC Audio Device( the one that doesn't work is 6.13.10.2152 (date 19/07/2002)but i was not able to find anything.
Please, could you help me ?
Thanks
Bruno

Hi,
I found another posting in this forum about this issue!
Your Satellite 5200-802 has a sound chip called Yamaha YMF753 and it is built in different notebooks! This chip does make problems with Service Pack 2 because MS regards the Yamaha AC-XG sound driver as being unstable. When Service Pack 2 is installed, Windows will disable the sound driver.
Here are some links which could help you!
Yamaha Generic Driver:
http://drivers.soft32.com/driver/download-Yamaha_AC_XG_Generic_Drivers_for_YMF753_743_752-24609.html
Relevant links:
http://www.yamaha.co.jp/english/lsiexp.html
http://support.microsoft.com/default.aspx?scid=kb;en-us;328435
Happy new year!
TOK

Bluetooth Audio Streaming Not Working - Posts Started Many Months Ago, No Solution Provided

Hello!
I would like to join the group of those who experience re-connecting issues of Audio Streaming Bluetooth function. I have reviewed posts on several forums and I see the issue is not resolved. Just for back up - neither manual nor automatic (other than re-booting the phone each time) re-connection works with: two Mercedes-Benz cars, Alpine stereo, Sony stereo and Blackberry Music Gate device.
It did work before upgrade to 10.2.1.3247 for Q10.
It does work with my old 9700.
It does work with my wife's and doughter's iPhones.
It does not work with the state-of-the-art Q10.
I think it is both annoying and should be embarrasing for BB. I see the posts showing up for many months now and no solution is provided yet. This is very basic functionality. I, actually, regret I bought Q10.
Any chance BB would fix it?
Is there anything new I missed?
Pawel

Well, good to hear.
For me the problems started with the latest updates...
I switched on another Q10 that I pulled out from the drawer, but did not allow updates. Everything works properly. But I cannot use many functionalities, including BlackBerry World as it asks for the OS update.
So the issue stays...

USB media device not working properly

Hello, I have a USB surround sound device that I cannot seem to get working properly. The audio works for the front speakers but will not work for the center or subwoofer. I have gone into the midi/audio device and switched it to multichannel, and it still wont work. The weird thing is that when I test the center and subwoofer speakers under the multichannel settings they respond, but when playing audio I can't get them to work. Any suggestions?
Black MacBook 2 GB RAM Mac OS X (10.4.7)

I have formatted and installed Windows 7 64bit and USB's were working!!
Updated and now they don't again?
Its going out the window soon!!
Could the firmware update play a part? Am I able to go back to the older firmware?

USB-Audio does not work correct on T430/T530

Hi all!
I'm owner of a T430 and a T530. Both are new PCs where I have installed Windows XP. The reason for XP is that I own older software and hardware, which is not supported on Windows 7. But it works fine and I have no reason to change hard- and software as long it fulfills my requirements! And Windows XP runs fine and fast on the T430 and T530.
Only problem is an EgoSys USB Audio interdace U2A. It is possible to install and run it, but there is a problem in the communication between operating panel and the hardware. When I move the slider for the level, the level jumps instead a smooth increase of the level, which means not alle values of the slider are transferred to the hardware. There is a similar behaviour with checkboxes: there are states of the U2A which are indicaed with LEDs. When I change the checkbox, sometimes the LED changes, sometimes not. This errors happen very frequently but not reproducable.
I tried several settings in the BIOS, like disabling one CPU, hyperthreading, USB3 etc. I tried the U2a also on a fresh XP-intallation without other software, but all without success, the behaviour of the U2A is always the same!
I also tested with an ExpressCard with USB-port from LogiLink, but this card does not recognize the U2A at all.
Up to now I have used the U2A on many different PCs without problems. What might be the reason that it does not work on an ThinkPad? Up to now I was very satified with the U2A and I would not like to replace it!
regards
GKap

Hello faith67baillie,
Welcome to the HP Forums!
I understand there is no sound from CDs or your Music folder. I will do my best to help! First, I require the following information, and clarification of the issue:
1. The computer's model number. If you require assistance locating this information, please reference this website: Guide to finding your product number
2. The computer's operating system. If you require assistance locating this information, please reference this website to determine your Windows operating system.
Additionally, if the issue just began occurring, I would perform a system restore. I want you to bring the computer back to the earliest restore point possible, in an attempt to dodge whatever caused the issue. Here is a document on how to perform a System Restore: System Restore
Mario
I worked on behalf of HP.

Audio devices not working when upgraded to windows 7

Dear Community members and Lenovo...
After uggrading my Lenovo N100 0768 54A from Windows Vista Home premium to Windows 7 Home premium, As some of our friends put up here, audio is not functioning. The mixer shows balancing in sound, the device driver shows, working, but the audio problem is still not resolved even after 3 weeks. I am really fedup with the audio driver installation over three weeks. The drivers tried, are both from lenovo site and realtek site. Still I could not solve the problem.
When upgarded from Win-XP to Windows Vista, realtek was not functioning, through our forum some of our friends suggested to install soundmax driver which was working well then. Now, Audio is the only problem. could Lenovo solve my problem. Some more community members could please help me out.
thanking you,
sakthivelu V M
Chennai - India

Hi:
While trying to help you, I was looking along the same lines as you were (I assume).
I did a search by the IDT 92HD73E audio codec and all I could find were drivers for system boards with Intel processors such as the driver you tried unsuccessfully.
I have finally found a W8.1 driver for that codec from a desktop PC with an AMD processor and chipset.
See if this one works...
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=cp-134120-1&cc=us&dlc=en&lc=en...

5.1 audio device not working with dv4-1050ee series

Good day,
I have a problem with my sound codec of my laptop. is there any compatible codec for my laptop that can be run a 5.1 channel audio device?
my laptop is hp pavillion dv4 1050ee series.
Awaiting for your prompt reply asap.
Thank you.

I reinstalled my custom Adobe Viewer, it works now.

Audio device not working. HP Pavilion dv6-6c50us

My audio device is disabled. There is no sound both the speakers and by using earphones, how can i fix it please? Product name: HP Pavilion dv6-6c50us Product no. A6X90UA#ABA Windows 7 64-bit
This question was solved.
View Solution.

Try system recovery.. I just did it and it worked! You should restore your computer to an earlier time before the sound stopped working.. And you can do that by going to the control panel. GOOD LUCK !!!

USB Storage devices not working with kernel in repositories [Solved]

I am experiencing a quite vexing problem with my USB Mass Storage devices, when I plug one in I get the following error in my dmesg:
[ 1811.976758] usb 2-2: new high speed USB device number 5 using ehci_hcd
[ 1812.101854] scsi7 : usb-storage 2-2:1.0
[ 1813.102576] scsi 7:0:0:0: Direct-Access Verbatim STORE N GO 2.68 PQ: 0 ANSI: 2
[ 1813.103818] sd 7:0:0:0: [sdb] 3913728 512-byte logical blocks: (2.00 GB/1.86 GiB)
[ 1813.104327] sd 7:0:0:0: [sdb] Write Protect is off
[ 1813.104331] sd 7:0:0:0: [sdb] Mode Sense: 0b 00 00 08
[ 1813.105567] sd 7:0:0:0: [sdb] No Caching mode page present
[ 1813.105572] sd 7:0:0:0: [sdb] Assuming drive cache: write through
[ 1813.107560] sd 7:0:0:0: [sdb] No Caching mode page present
[ 1813.107565] sd 7:0:0:0: [sdb] Assuming drive cache: write through
[ 1813.108340] sdb: sdb1
[ 1813.112180] sd 7:0:0:0: [sdb] No Caching mode page present
[ 1813.112186] sd 7:0:0:0: [sdb] Assuming drive cache: write through
[ 1813.112190] sd 7:0:0:0: [sdb] Attached SCSI removable disk
[ 1813.196828] sdb: detected capacity change from 2003828736 to 0
In the /dev/ folder on the device shows up, not the partitions. When I try to open it with cfdisk I get "FATAL ERROR: Cannot open disk drive". I am pretty sure it iss neither a hardware problem with my laptop or my usb devices, as they both work on my dual-booted Ubuntu. My usb ports in general seem to be functioning, I can still charge a phone through them and use my built in USB webcam.
I am not sure where exactly this issue lies, it started after I upgraded to 3.0.7 (among other updates) from the normal repositories, but still persisted after I downgraded to 3.0.6.
My attempts at Googling have so far revealed mainly hardware errors, which don't seem to fit with the devices working on another OS on the same pc.
Thanks.
Last edited by MartianW (2011-11-09 16:30:15)

Same problem. I try to mount different devices. For each device same result.
The file /var/log/error.log is full of this kind of messages:
Nov 4 21:34:18 moria kernel: [ 113.455195] sd 6:0:0:0: [sdb] No Caching mode page present
Nov 4 21:34:18 moria kernel: [ 113.455200] sd 6:0:0:0: [sdb] Assuming drive cache: write through
Nov 4 21:35:29 moria kernel: [ 184.077728] sd 7:0:0:0: [sdb] No Caching mode page present
Nov 4 21:35:29 moria kernel: [ 184.077736] sd 7:0:0:0: [sdb] Assuming drive cache: write through
Nov 4 21:35:29 moria kernel: [ 184.080720] sd 7:0:0:0: [sdb] No Caching mode page present
Nov 4 21:35:29 moria kernel: [ 184.080730] sd 7:0:0:0: [sdb] Assuming drive cache: write through
Nov 4 21:35:30 moria kernel: [ 184.808109] sd 7:0:0:0: [sdb] No Caching mode page present
Nov 4 21:35:30 moria kernel: [ 184.808116] sd 7:0:0:0: [sdb] Assuming drive cache: write through
Nov 4 21:41:10 moria kernel: [ 525.107109] sd 8:0:0:0: [sdb] No Caching mode page present
Nov 4 21:41:10 moria kernel: [ 525.107114] sd 8:0:0:0: [sdb] Assuming drive cache: write through
Nov 4 21:41:10 moria kernel: [ 525.110615] sd 8:0:0:0: [sdb] No Caching mode page present
Nov 4 21:41:10 moria kernel: [ 525.110619] sd 8:0:0:0: [sdb] Assuming drive cache: write through
Nov 4 21:41:11 moria kernel: [ 525.841487] sd 8:0:0:0: [sdb] No Caching mode page present
Nov 4 21:41:11 moria kernel: [ 525.841491] sd 8:0:0:0: [sdb] Assuming drive cache: write through

USB Audio Does not work

Please , I can listen to You Tube & i have picture 7 sound , but I cannott play a DVd or CD I get no sound and in my music folder it plays byt I have No Sound , [Thank you for visiting the HP Support Forums. I am sorry to inform you that your post has needed some editing to remove personal information.]

Hello faith67baillie,
Welcome to the HP Forums!
I understand there is no sound from CDs or your Music folder. I will do my best to help! First, I require the following information, and clarification of the issue:
1. The computer's model number. If you require assistance locating this information, please reference this website: Guide to finding your product number
2. The computer's operating system. If you require assistance locating this information, please reference this website to determine your Windows operating system.
Additionally, if the issue just began occurring, I would perform a system restore. I want you to bring the computer back to the earliest restore point possible, in an attempt to dodge whatever caused the issue. Here is a document on how to perform a System Restore: System Restore
Mario
I worked on behalf of HP.

Firewire/USB audio device not working post 10.10.2 upgrade

Similar Messages

Maybe you are looking for