Fireworks CS 6 skews images on import

When I import an image full-size, no problem, but when I put it on the page with the mouse drag to fit, the image is horizontally compressed - any ideas why?

Hi Joyce,
It happens when dragging before clicking to place. The image is distorted wide. I do this all the time with no problem with my Fireworks CS4. Actually, the problem went away yesterday, but it came back today!
Aloha,
Javier

Similar Messages

Is there any way to get the height/width of an image before importing it in the indesign document.

Hi All,
I need to obtain an image's attributes such as dimensions (height, width in pixels) without placing image in indesign document.
I have full path of the image (say abc.jpg is stored at c:\my pic\abc.jpg).
I have obtained the IDFile for this image, tried getting size using GetFileSize() which correctly return size in bytes.
Is there any way to get the height/width of image without importing it in the indesign document.
Please, give me some hints. I have spent quite a lot time digging in CHM. I have searched in FileUtils, IDFile API's but found no method which serves this purpose.
At this point I am clueless where to search next.
Any help will be appriciated.
Just a point to mention, I am able to get image height and width for an image in indesign doc though Its not my requirement.
Thnx,
D.

You might be able to examine the contents of the PlaceGun after calling kImportAndLoadPlaceGunCmdBoss without actually placing the image in a document. Not sure, but would be worth looking at.
Otherwise you will probably have to write platform specific code, ideally with a generic platform-independant wrapper (see SDKSamples/paneltreeview/PlatformFileSystemIterator).
For the Mac, look at CGImageGetWidth() etc., not sure what the best option is for windows.
Perhaps Quicktime could provide you with a platform independant solution.

IPhoto darkens images when importing

I've just been importing some photos into iPhoto 6 and I've noticed that quite a few pictures have been noticeably darkened, and I have no idea why! I checked in the folder and the darker photo does not appear in the folder of 'Modified' photos, but in the 'Originals' folder.
If I open up the same image from my desktop in Preview and comare it side-by-side with the same image I imported into iPhoto I can immediately see the difference. The problem is really a darkening in areas of shadown.
Is iPhoto somehow thinking it is 'enhancing' my photos, but this just doesn't work on some photos or what? I just want the imported image to look identical to what I see when opening the file with Preview on the very same computer. That's not really asking too much.

I've figured out my own problem. iPhoto was set up to assign photos with a ColorSync profile and this profile made the photo look darker.

Rotate images DURING import

To be able to rotate images DURING import would be a nice feature. I can do this with Apple's Image Capture. They are imported wih the rotation I have requested, and this show in the icons too.
I like popping a folder open and view my images in icon view. I don't have to open a program at all. It's quick and efficent way to view my images, but also the orientation is correct right from the beginning with the original. Maybe one more step in the import process, for those of us who don't mind it, BUT it's also one more step I DON"T have to do in Lightroom, Photoshop, or any other program. And the rotataion in Lightroom are temporary to the eye anyway.
This is good feature/option to add to the import. Lightroom ROCKS. It just elimanted a multi-step, multi-software import process. Almost. The "rotate during import" feature would seal the deal. It's a big deal to me. Like the Apple Image Capture, you could place rotation icons on each image in the preview window. If you added that, man, solid gold!
thanks,
Craig

DW Harrison:
Sure, I get that, but I can understand how non-destructive editing is useful in image adjustments where later you may regret having added too much saturation in the reds, so you're glad you can go back to the original. But who wants a portrait image rotated in landscape orientation EVER? It's a personal preference, and, no, not a priority in my opinion.
Ian:
You may think your post was enlightening, but, perhaps to someone else. Surely not me. I've always known what the 'real cause' is -- some software, i.e. WEB BROWSWERS, ignore the EXIF tag. Hence, my question was more of a philosophical one: why have portrait images rotated sideways, only to have aware applications ON-THE-FLY rotate them according to the EXIF tag? Why not just have the original file re-written in different dimensions?
For that matter, I specifically spelled out 'why can't... [the file be] rewritten from 800x600 to 600x800'. Hence I find your response 'They will be if the rotation tag is set in the camera' pretty darn irrelevant. No, they WON'T be rewritten rotated. Only by Graphic Converter if you have the option selected, or other applications that don't come to mind right now.

No images to import

Help. I just returned from a big trip with loads of pictures and when I connected my camera one SanDisk worked great but when I put the other in iPhoto says "no images to import". I can see the images on my camera, though? Any ideas?
iMac Mac OS X (10.4) Nikon 4600 Coolpix

Hi there,
I would try it again, remove and reinsert the suspect card. If it still does not work, if I had another computer I would try that one. If that doesn't work, but you can still see the images through your camera. I would bring the camera and card to the nearest reputable photo lab and have them try to copy images onto a CD... also, make sure batteries are fresh.
Rick
iMac G5 iSight 20" - 30G iPOD in Slimming Black - Mac OS X (10.4.7) - HP Pav 15" WS and Toshiba Sat 17" WS LP's - Canon 20D & A620

Settings added when when images are imported

When I import images into Lightroom3 the images have already been tweaked. How do I turn off the setting as the images are imported? Second, when I attempt to send images to Photoshop for editing Lightroom makes a copy, how can I stop this fom happening?

Two things to avoid that LR applies "tweaking" on import.
1) Make sure that the <Apply Auto-tone adjustments> box is unchecked. You find it under <Preferences> in the <Presets tab>.
2) In the Import Dialog on the right hand side, in the panel <Apply During Import>, make sure that <Develop Settings> shows <None>.
There is no way to avoid making a copy when you open a RAW-file in PS. PS can not save a file as a true RAW-file; there is a Photoshop-RAW but that is not a true RAW-file like the one that your camera creates.Since PS can save your edits only in a different format than true RAW, by necessity a copy has to be made.
If you have JPG's in LR (or TIFFs or PSD's) and want to edit them in PS, you can choose <Open Original> and then no copy is made. But when you open these as <Edit a Copy with LR Adjustments> then again a copy is made.
WW

How can I re-name a single image after importing it to Aperture?

I am having a problem renaming a single image after importing it - I would have thought it would be simple! Does anyone know how this can be done?

Hi RQ,
Straight out of the manual
To rename masters
In the Browser, select an image or group of images.
Choose Metadata > Batch Change (or press Command-Shift-B).
In the Batch Change dialog, choose a naming convention from the Version Name Format pop-up menu to specify how you want the masters named.For example, choose Version Name from the Version Name Format pop-up menu to have your master filenames changed to match the names of the corresponding versions in Aperture. If you choose a custom name format, enter the name you want in the Custom Name text field. For more information about naming files, see Automatically Naming Your Imported Images.
Select the Apply to Master File(s) checkbox, then click OK.
The master files corresponding to the selected images are renamed. For more information about working with the Batch Change dialog, see Batch Changing Metadata.
Hope that is what you are after.
DJ

Partial rotation of images when importing...

I'm wondering how to stop Lightroom from "squaring up" my images when I import them. Attached is a screen shot to illustrate.
I also can't find any consistentency, if I import the same image three times it will be as above twice but not on the third time!
I'm wondering if this is a metadata thing?
BTW camera is a Nikon D600.
With thanks in advance,
-Simon

If this is only happening to a few of the images on import it is most likely something related to your camera. If ALL of the Imported images exhibit the issue then there are two things in LR that could cause this to happen:
1) You are applying a Develop preset on Import that has Lens Corrections> Manual> Rotate tool setting other than '0.'
2) Your LR 'Default Develop Settings' has a Crop Angle tool or Lens Corrections> Manual> Rotate tool setting other than '0.'
To check this import one of the images from CF card that shows the rotation. Examine the Crop Angle tool and Lens Corrections> Manual> Rotate tool settings to determine which one is being applied. From inside the Develop module with the imported image still rotated hit the master 'Reset' button at the bottom of the right-hand Develop panel. This applies your LR 'Default Develop Settings.'
a) If the image is still rotated you may have inadvertently updated your LR 'Default Develop Settings' in the past with the image rotated. To correct this simply hit the master 'Reset' button, reset both the Crop Angle tool and Manual Rotate tools to '0,' go to toolbar Develop> Set Default settings, and select 'Update to Current Settings.'
b) If the image is not rotated you are probably applying a Develop preset that was inadvertently created with the image rotated. You will need to recreate this preset making sure Lens Corrections> 'Transform' is unchecked. This is the only Develop preset setting that will rotate the image as in your example.
If neither a or b fixes the issue you can try resetting your LR Preferences file:
http://members.lightroomqueen.com/Knowledgebase/Article/View/1148/198/how-do-i-delete-the- lightroom-preferences-file

Iphoto is blacking out vertical images when importing. how do i fix this?

iphoto is blacking out vertical images when importing. how do i fix this?

There are 9 different versions of iPhoto and they run on eight different versions of the Operating System. The tricks and tips for dealing with issues vary from version to version and OS to OS. So before anyone can help, they need information to work with. Things like:
- What version of iPhoto.
- What version of the Operating System.
- Details. What were you doing when the problem arose?
- Did it ever work properly?
- Are there error messages?
- What steps have you tried already to solve the issue.
Anything else you can think of that might allow someone else to understand your issue.

Exposure Importing Problems __ Darker images after Import

Shooting on 5D Mark II.. Shoot RAW and JPEG.. Running Mac with lastest OS
Getting proper exposures in Camera.. Importing to LightRoom using card reader.
Having major problems once I import into Lightroom. My images are significantly Darker.. 3 stops or so. I have triple checked that I am not applying any presets to my images upon import. Cannot figure this out!!
Please help with this issue...

trevajake wrote:
Several Things that I'm also curious about... Why does the tone curve - point curve default to Medium Contrast???? Also , in the basic develop settings, what are the two icons Tone and Auto... Notice how the Auto is highlighted..
Medium Contrast is just the default for all Raw images in LR
Auto is highlighted because you can activate AutoToning by clicking it
A couple of questions again, which might have been asked before:
If you import the .cr2 and the JPEG from your camera, do both have the same dark look?
Have you tried recalibrating your monitor?
Can you upload a JPEG and a Raw sample file to somewhere (i.e. www.yousendit.com) and post a screenshot to them here (don't use a photo publishing site please)
Beat

Get image error importing to Adobe edge

I get "Error loading image" when importing .png or .jpg into Adobe edge

Hello Shawn, Mark!
I'm trying something like you, playing with Adobe Edge and trying to use the JS and HTML file it produces with iAd Producer, but I can't get it work.
Have you finally got it working?

Bridge Skips Images on Import

Bridge has started skipping images on import. I find fewer files than were on the CF disk. First time I saw this I had set Bridge to delete on import. Next time, I had to search for missing sequence numbers and reimport. Out of about 450 images, 22 were missing. This takes extra time, slows down my import process, and is error-prone.
I have resorted to using Adobe DNGConverter 6.6.0.261 but it is slower and has fewer features than Bridge.
I have applied all the updates to Adobe products as of 2/29/2012. I am using CS5 with Photoshop & Bridge. My Sony VIAO PCG-42421L is running Windows 7, 4 GB RAM, all updates applied as of 2/29/2011. I am importing from 4 GB CF cards from a Canon 30D, images formatted as CR2. I have set Bridge to convert to DNG and add ID & Copyright metadata.
I have found nothing on this problem in Adobe support or this forum. Does Adobe have anything to say? Has anyone else seen this or found a solution or have a better workaround?

Does Adobe have anything to say?
This is a user to user forum, if you want to contact Adobe directly you can find the link on the Help and support section at the main page of the Bridge forum.
Has anyone else seen this or found a solution or have a better workaround?
Not a solution because I never heard nor had this problem and I use Photodownloader a lot for several years now.
But I sure know a better workaround. The option to delete files after import should not even be there to my opinion but certainly it should not be used ever!!
Personally I have set import files in one main folder and on import have Bridge pointed to that folder so the cache is made instantly. Rename files using yyyymmdd and sequence number (preserve original filename and no subfolders because the date renaming sort the files per date already), convert to DNG, back up original Raw file and add metadata template.
After having checked the DNG files are correct (showing all thumbs and randomly choose some to see if the HQ preview has build correctly) I start thinking about deleting the files from card, often not on that moment but rather just before a new session. And I never use the delete function but the option to Format the CF card using the camera and the in camera software because that is the place where it should be done
Although I once have 'lost' some files in the early days at the start of this millennium due to not correctly remove from card reader (and they where not really lost but the resource fork or something had lost and therefore the files could not be found but where there still hidden). If we had the knowledge and easy access to recovery software like we have these days it also would not have been a problem then.
So assure you have the files you want (check the content in your computer, I use Mac and with a card reader I can easy access the content in the Finder, no reason why you should not be able to do that in Explorer) and after having copied them manually use the camera to format the card and keep doing so and see if the problem has gone.
Formatting every time instead of deleting has always been my workflow and I never lost the functionality of a CF card. (though I lost a few but with that I mean really lost in the field...)

What is the best format to import images into iBA? How should I compress my images before importing? What is the best file format? PNG? Jpeg?

What is the best format to import images into iBA? How should I compress my images before importing? What is the best file format? PNG? Jpeg? I'm trying to figure out the best file format / compression for importing images into iBA. Also, does anyone know how iBA will compress the file? Are the assets attached (like a website) or flattened out? Does anyone know how iBA handles this? Many many thanks to anyone with insight into this.

This question is largely answered by the following thread...
https://discussions.apple.com/message/17805700#17805700

On Importing raw images to Lightroom only some of the images will import.

I have used LightRoom for years and just started having this issue. I select all of my raw images and "Open with" LightRoom 5. I can view all of the images that I want to import. It then imports only some. There are times it will import some and then freezes up in Import mode. I have even converted images to dng and found it to do the same thing. As a professional photographer this is frustrating!

If you mean "Open With" in your operating system, I am surprised that you get any images to import this way. As far as I know, Adobe has (tried to) disable this as a method of importing photos, and so I doubt you will find any help here in this forum on this matter, as this is not a function of Lightroom (although you used to be able to do it in earlier versions).

10.8 - image capture - "import to" does not allow to select a program

Hi,
after updating to 10.8 I was hoping that my problem with 10.7.4 and Image Capture would be solved but it persist and additionaly has removed all my setings.
When Image Capture shows the pictures of my iPhone I select some pictures and go to "Import To Other".
That will open the "Open" dialog with all Programs/Applications on my Mac, but all Programs/Applications are grayed out.
Until 10.7.3 one was able to select any program to send the pictures to it like Evernote, ExifRenamer, etc.
Anyone else has the same issue?
Regards, Carsten
10.7.4 - image capture - "import to" does not allow to select a program

There is a work-around availbale now in the other thread.
10.7.4 - image capture - "import to" does not allow to select a program

Fireworks CS 6 skews images on import

Similar Messages

Maybe you are looking for