Fireworks CS3: How to call a background

Hello,
At work, I use Fireworks CS3. My job is to normalize our
products pictures to the group’s colors.
In fact I take a picture and retouch it, then I load a
standard background, I put the pic on it and I export all in jpg.
Instead of searching for the background file in my computer
and copy/paste the detoured pic on it, I would like to
“call” this background as a calque into my document,
and automatically resize my document.
Is it possible ?
Sorry for my English, I’m French. Please use easy words
to reply :)

"Mike_fr" <[email protected]> wrote in
message
news:gh6be1$bpm$[email protected]..
> Hello,
>
> At work, I use Fireworks CS3. My job is to normalize our
products pictures
> to
> the group?s colors.
>
> In fact I take a picture and retouch it, then I load a
standard
> background, I
> put the pic on it and I export all in jpg.
>
> Instead of searching for the background file in my
computer and copy/paste
> the
> pic, I would like to ?call? this background as a calque
into my document,
> and
> automatically resize my document.
>
> Is it possible ?
I'm guessing there is a batch process you could do here...
unfortunately,
I've never used batch processing, so....
Tim G.
http://www.pactumweb.com
http://www.shortordersite.com
Be smart:
http://www.pactumweb.com/client/tips.php

Similar Messages

How to get transaction id of a function called in background

Hi all,
does someone know how to retrieve t-id of a function called in background (tRFC) client side? I found
'ARFC_GET_RECEIVER_TID'
'ARFC_GET_TID'
but these works server side (function called knows its t-id .. caller no). Is there some similiar client side so that after calling function I can retrieve its transaction id ? I know it's not the same context, for explaining better, what I need it's something like fork() in C, where process father (the one that forks) receive as return value process id of process forked.
SEARCHING ON FORUM I see that many people answered on question about transaction id with sy-tcode misunderstanding the question. This transaction id it's not the tcode. This is the char 32 unique transaction code
thank you
regards
Gabriele

You can have a look at function TRFC_RECEIVER_INFO
[qRFC API for the Inbound Queue|http://help.sap.com/saphelp_nw04/helpdata/en/21/5c5f3ca0dd9770e10000000a114084/content.htm]

How to capture errors when a Function module is called as BACKGROUND TASK

How to capture errors when a Function module is called as BACKGROUND TASK?.Please advise.
FUNCTION ZRPM_DELETE_PROJECT_DATA_API.
""Local interface:
*" IMPORTING
*"     VALUE(IV_EXTERNAL_ID) TYPE RPM_TV_EXTID OPTIONAL
*"     VALUE(IV_PROJECT_GUID) TYPE RPM_TV_GUID OPTIONAL
*"     VALUE(FLAG) TYPE BOOLEAN OPTIONAL
*" EXPORTING
*"     VALUE(EV_RC) TYPE I
*"     VALUE(EV_MSG) TYPE STRING
*"     VALUE(ET_MSG) TYPE RPM_TT_MESSAGES
IF flag = cl_rpm_co=>sc_true.
    Call function 'RPM_DELETE_PROJECT_DATA' IN BACKGROUND TASK
      EXPORTING
        IV_EXTERNAL_ID = IV_EXTERNAL_ID
        IV_PROJECT_GUID = IV_PROJECT_GUID
      IMPORTING
        EV_RC           = EV_RC
        EV_MSG          = EV_RC
        ET_MSG          = ET_MSG.
    COMMIT WORK.
ELSE.
    CALL FUNCTION 'RPM_DELETE_PROJECT_DATA'
      EXPORTING
        IV_EXTERNAL_ID = IV_EXTERNAL_ID
        IV_PROJECT_GUID = IV_PROJECT_GUID
      IMPORTING
        EV_RC           = EV_RC
        EV_MSG          = EV_MSG
        ET_MSG          = ET_MSG.
ENDIF.
ENDFUNCTION.
In above code how to capture 'EV_RC' when FM is called as background task.

Prakash,
CALL FUNCTION IN BACKGROUND TASK allows no IMPORTING parameters, so that your code will produce a syntax error.
The calling program can only handle errors of remote function calls (RFC) if these are either
- synchronous RFC (that is CALL FUNCTION ... DESTINATION ...) or
- asynchronous RFC (that is CALL FUNCTION STARTING NEW TASK ... DESTINATION ...).
Both synchronous and asynchronous RFC allow the capturing of errors by means of exceptions. But that is a different topic.

How to create a background job for call transaction

hi gurus
can any one suggest me
how to create the background job for call transaction.
thank you
regards
kals.

Hi,
Refer
https://forums.sdn.sap.com/click.jspa?searchID=10926107&messageID=889652
Regards
Kiran Sure

How do I get Fireworks CS3 to work in Windows 7? After installation my internet would not function.

I installed
Fireworks CS3 in the new Windows 7. It seemed to function well. After a reboot I noticed my internet would not work. I attempted to resolve the matter but was unsuccessful. Has anybody had this problem? If so what is the fix.

Is Windows 64bit or 32bit?
I've heard that 64bit Win7 will not play well with Fireworks CS3. Try to run Fireworks CS3 in some WinXP Compatibility Mode in Win7 -- I think this mode is available in Win7 Pro and Ultimate...
Hope this helps...
Cheers!

How to replace the background in cs3?

I have had unsuccessful attempts to mask the subjects against the black background (following this to mask the subject: http://www.scottkelby.com/blog/2009/archives/5384).
I couldn't select just the black background as subject's hair is also in black color.
How to separate the background in these situations?

Along with the excellent tips above, two things that might help you create your Mask would be to explore the Channels in Lab Mode (Image>Mode>Lab Mode), as there is different info in those Channels. Also, I have used Image>Adjustments>Highlight & Shadow on a dupe Layer (Ctrl+J) to get more separation between the hair and the background. Use that to "see" the areas that you need to include in the Mask, or delete from the Mask. When done, just Delete that adjusted Dupe Layer, as it's only for you to "find" the edges of the hair.
Good luck, and be patient. The time that you take will pay off with a great Mask. Those are part art, part science and an investment in time.
Hunt

Fireworks CS3 OS X constant crashes with complex files

I recently purchased CS3 and started using Fireworks CS3
instead of Photoshop for web development. Absolutely love it. I
started having crashes, mainly on opening complex files created in
Fireworks CS3. A couple weeks ago I formatted my entire system,
starting completely from scratch, only installing the applications
and fonts that I absolutely needed. Nevertheless, I continue to get
Fireworks crashes, which appear by the logs to be related to a
memory leak in Fireworks.
If Fireworks only crashed itself, the issue would be bad
enough. But it brings down several other apps with it. The apps are
different each time. Sometimes it crashes Mail and Dashboard
Calendar, sometimes it crashes Firefox and iCal. Rarely does it
crash only itself. And rarely does it crash all programs. It's
usually a random selection of apps.
All other CS3 apps have worked beautifully. All other apps on
the box work great. And the log is filled with stuff like:
quote:
Adobe Fireworks CS3(299,0xa000cfc0) malloc: *** Deallocation
of a pointer not malloced: 0xfcc2a8; This could be a double free(),
or free() called with the middle of an allocated block; Try setting
environment variable MallocHelp to see tools to help debug
Jun 1 11:01:02 brian-morykons-computer
/System/Library/Frameworks/ApplicationServices.framework/Frameworks/ATS.framework/Support /ATSServer:
FOExceptionMainHandler caught a fatal exception at 0x000ddb9f\n
Jun 1 11:01:02 brian-morykons-computer
/System/Library/Frameworks/ApplicationServices.framework/Frameworks/ATS.framework/Support /ATSServer:
ATSServer got a fatal exception! Please check /var/log/ats.log,
also viewable in Console.app
So it's definitely a Fireworks issue. And it's too bad. I
love Fireworks for Web Development. Any updates or suggestions
would be appreaciated.
My system: MacBook 2ghz Core Duo, 2gb ram, 100gb hard drive,
Mac OS 10.4.9
Thanks,
Brian

Heaven forbid, Linda! How dare a Fireworks user talk about
his problem with yet another buggy Macrodobe product. The nerve!
Telling him to contact your support is like telling him to contact
the man in the moon because you've run out of cheese.
Brian, I share your frustration. Fireworks has become
completely unstable for me with large or complex files on my Mac.
It works much better on my PC though. It has been my experience
that almost all releases of Macrodobe software works this way on a
mac until late in its product cycle.
This, sadly, seems to be the way Macrodobe works though. :(
This is a user to user forum, Brian. There's not much we can
do about
such issues here. Your best bet would be to contact Adobe
Customer Service.
http://www.adobe.com/support/programs/fireworks/?tab:contact=1
Linda Rathgeber [PVII] *Adobe Community Expert-Fireworks*
http://www.projectseven.com
Fireworks Newsgroup:
news://forums.projectseven.com/fireworks/
CSS Newsgroup: news://forums.projectseven.com/css/
http://www.adobe.com/communities/experts/

Round tripping with Fireworks CS3

I am using Dreamweaver/Fireworks CS3 and editing images
between Dreamweaver and Fireworks by round-tripping via the
Property Inspector is a very cool feature. However, I can't seem to
use this same feature with background images linked to the page in
a CSS style sheet, because there is not way to "select" the image
in Design View.
Is there a way to "select" a background image linked to the
page in a CSS style sheet, so it will show up in the property
inspector where I can edit the source file? There has to be a way!
Can anyone help me out?
David Conner

> Is there a way to "select" a background image linked to
the page in a CSS
> style sheet, so it will show up in the property
inspector where I can edit the
> source file? There has to be a way!
not directly from the design view window-
But find out the image's name and folder location from
whatever code it's
called in, and then go to the Files Panel and right-click on
the file to
edit or optimize it in fireworks. If it's a background, it's
a single image.
If it's part of an inserted .png table or similar, select an
adjacent real
image that's part of the same .png and pick the round trip
option.
Alan
Adobe Community Expert, dreamweaver
http://www.adobe.com/communities/experts/

Adobe Fireworks CS3 - Deutsch

Hallo,
ich habe eine Frage. Hat jemand vielleicht Fireworks CS3 auf Deutsch? Ich hab es auf Englisch aber möchte gerne in Deutsch haben.. ich bitte um Antworten.
Vielen Dank!
Rahmi_DK

quote:
Originally posted by:
cwt341
on my schools computers we have different fonts then i do
here on my home PC and a font im looking to get because im using it
for a project is called 28 days later..how do i get the font and
install it so i can use it in fireworks
How about from
dafont or
Softpedia?
Is that your font? All I did was search with Google. Download the
zip file and unzip it.
In Windows go to Control Panel and select Fonts. From there,
you can install a font. (In XP, if you open the Fonts folder, all
you need to do is drag a font file into the folder.)

PSD source file for animated GIF's - Fireworks CS3

hi
i've upgraded to Web Premium Suite CS3.
Q: i have several PSD source file for animated GIF's created
with ImageReday.
how can i open/iomport/convert it in/to Fireworks CS3 without
looing the "animation"
many thanks
Ueli

ugisiger wrote:
> hi
> no any extras. simply 5 layers "distributed" on the
timeline.
> if i open a "animated" psd, so i get a file with the
layers and one frame, but
> loosing animation stuff like "when show witch layer an
for how long"
> -> there is no conversion to FW frames.
>
> Ueli
>
I don't do animations in PS or IR, but if you like, send me
the file
and I'll see if I can figure something out.
Jim Babbage - .:Community MX:. & .:Adobe Community
Expert:.
Extending Knowledge, Daily
http://www.communityMX.com/
CommunityMX - Free Resources:
http://www.communitymx.com/free.cfm
.:Adobe Community Expert for Fireworks:.
news://forums.macromedia.com/macromedia.fireworks
news://forums.macromedia.com/macromedia.dreamweaver

How to schedule a background Job based on events

Hi,
We are on 4.6 C.
We have a background job that has two ABAP programs.
We need to start the 2nd ABAP program only after the first one has run successfully.
If the second ABAP program does not run, the the job should have a status "FINISHED".
Help appreciated.
Thanks
Mala

Hi,
How to schedule a background Job based on events,please refer to the follow SAP help:
You can use events that have already been defined, or you can create new events for scheduling background jobs.
If you wish to use new events, do the following to implement the event scheduling:
Define and transport the event as a user event with transaction SM62.
You must define only event IDs; event arguments are not defined in the R/3 System. Instead, you specify event arguments when you schedule a job to wait for an event and when you trigger the event.
If you define a new event, you must also transport it to your production systems. The event transaction does not have a connection to the transport system. Instead, you must create a transport request for the event yourself.
Do this to transport an event:
Create a transport request.
Start the editor in the transport request and enter the following:
R3TR TABU <table name> where table name is BTCSEV for a system event ID, BTCUEV for a user event ID.
Press F2 with the cursor on the table name to call up the screen for specifying the table entries to transport. In this screen, enter the event IDs that you have created.
Save and release the transport request. Ensure that it is imported into your production system(s).
To trigger an event, add:
the function module BP_EVENT_RAISE to your ABAP program, or
the program SAPEVT to your external script, batch file, or program.
When your programs execute these keywords, an event will be triggered in the R/3 background processing system. The event-based scheduler is started immediately. It in turn starts all jobs that were waiting upon the event, subject to normal background processing restrictions, such as the requirement that the job has been released to start.
Schedule the jobs that are to run when your events are triggered.
You can schedule jobs for one-time start or to be started whenever an event is triggered.
Regards,
collysun

How to schedule a background job in realtime

Hi,
Can you tell me how to schedule a background job in realtime.
give some example scenerios in scheduling the background jobs in realtime.
Thanks.
sam.

And also.....
There are two ways for you to handle,
one manually setting up the job through SM36 which is better and convinient,
secondly through program using FM's JOB_OPEN, SUBMIT, JOB_CLOSE.
Find below steps in doing both:
Procedure 1:
1. Goto Trans -> SM36
2. Define a job with the program and variant if any
3. Click on start condition in application tool bar
4. In the pop-up window, click on Date/Time
5. Below you can see a check box "Periodic Job"
6. Next click on Period Values
7. Select "Other Period"
8. Now give '15' for Minutes
9. Save the job
Procedure 2 via Program:
Below is a sample code for the same. Note the ZTEMP2 is the program i am scheduling with 15mins frequency.
DATA: P_JOBCNT LIKE TBTCJOB-JOBCOUNT,
L_RELEASE(1) TYPE c.
CALL FUNCTION 'JOB_OPEN'
EXPORTING
JOBNAME = 'ZTEMP2'
IMPORTING
JOBCOUNT = P_JOBCNT
EXCEPTIONS
CANT_CREATE_JOB = 1
INVALID_JOB_DATA = 2
JOBNAME_MISSING = 3
OTHERS = 4.
IF SY-SUBRC 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
SUBMIT ZTEMP2 VIA JOB 'ZTEMP2' NUMBER P_JOBCNT
TO SAP-SPOOL WITHOUT SPOOL DYNPRO
WITH DESTINATION = 'HPMISPRT'
WITH IMMEDIATELY = SPACE
WITH KEEP_IN_SPOOL = 'X' AND RETURN.
CALL FUNCTION 'JOB_CLOSE'
EXPORTING
JOBCOUNT = P_JOBCNT
JOBNAME = 'ZTEMP2'
STRTIMMED = 'X'
PRDMINS = 15
IMPORTING
JOB_WAS_RELEASED = L_RELEASE
EXCEPTIONS
CANT_START_IMMEDIATE = 1
INVALID_STARTDATE = 2
JOBNAME_MISSING = 3
JOB_CLOSE_FAILED = 4
JOB_NOSTEPS = 5
JOB_NOTEX = 6
LOCK_FAILED = 7
INVALID_TARGET = 8
OTHERS = 9.
IF SY-SUBRC 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Hope the above helps you.
***********reward points,if found useful

There is something wrong with the volumes buttons in my macbook pro, every time i pressed the one who raises the volume, it leads me to the screen where (i do not no what its called) the background is black with the date and time and a calculator.

There is something wrong with the volumes buttons in my macbook pro, every time i pressed the one who raises the volume, it leads me to the screen where (i do not no what its called) the background is black with the date and time and a calculator. However, when i lower it, my safari tab goes out of the screen. What do you guys think i should do? I'm getting very nervous.

hey HAbrakian!
You may want to try using the information in this article to adjust the behavior of your function keys to see if that resolves the behavior:
Mac OS X: How to change the behavior of function keys
http://support.apple.com/kb/ht3399
Take care, and thanks for visiting the Apple Support Communities.
-Braden

How to call a java script?

Hi,
I m new to Indesign and also to MAC OS...
I ve tried the sdk samples of InDesign CS3 on MAC OS. It works well.
I m making changes to one of the samples (BasicPanel). I ve added few check boxes and buttons in it. I donno where to give the code for button(in the panel) event/action?
I also need to know "how to call a java script from InDesign CS3 SDK ?"...
I have the Scripts ready... Can someone provide the code used to call JS...
Someone pls help me.....
Thank You...

        Here s the code to call a Javascript:
        IDFile scriptFile;
        FileUtils::GetAppInstallationFolder(&scriptFile);                    //application folder path
        FileUtils::AppendPath(&scriptFile, PMString("Scripts", -1, PMString::kNoTranslate));
        FileUtils::AppendPath(&scriptFile, PMString("Scripts Panel", -1, PMString::kNoTranslate));
        //inside the scripts panel, append path of the folder in which ur script is present.
        //Suppose, ScriptsPanel->NewFolder->Link.jsx
        FileUtils::AppendPath(&scriptFile, PMString("NewFolder", -1, PMString::kNoTranslate));
        FileUtils::AppendPath(&scriptFile, PMString("Link.jsx", -1, PMString::kNoTranslate));
        InterfacePtr<IScriptRunner>scriptRunner(Utils<IScriptUtils>()->QueryScriptRunner(scriptFi le));
        bool filestatus=scriptRunner->CanHandleFile(scriptFile);
        if(filestatus==1)
            scriptRunner->RunFile(scriptFile,kTrue,kFalse);
Regards,
tnhems

Problems with Fireworks CS3 in Windows 7 Pro 64 bit

I have recently upgraded to Windows 7 Pro from Windows XP Pro. My Fireworks CS3 is having a problem. I cannot select items in the left side menu bar if I minimize or move the Fireworks CS3 window. If I have just opened the window it works, but minimize the window or move it and the toolbar stops working.
This problem is not unique to my machine. 2 other people are having the exact same problem. Here is the link to the Windows 7 forum:
http://www.sevenforums.com/software/26957-adobe-fireworks-cs3-issue.html
We sure could use some help. This is one of my bread and butter programs.

I'm happy to hear you have other work-around alternatives!
Businesses with mission-critical software usually are very careful to research that their software will run on any proposed new system or that alternative software is available. This is the main reason that Microsoft had to continue supporting XP longer than they intended. Too much business-critical software ran on XP but did not run under Vista and would take some time before it would be upgraded to do so...if at all.
If you have "bread and butter" apps, then it was your responsibility to make sure that you could run them once you upgraded. Adobe's software worked more or less as advertised for the operating systems that were available at the time the versions were released. That's reasonable. Expecting indefinite support into the future is not.
Fireworks isn't a $2000 product. Adobe continues product development, yes. They've moved on to CS4 and its patches. You can upgrade to FW CS4 for about $150. The system requirements for FW CS4 do not include Windows 7; note that Fireworks is only certified for 32-bit operating systems:
http://store.adobe.com/store/en_us/popup/software/fireworks4/systemreqs.html
However, there's a statement about CS4 applications (in general) working with Windows 7:
http://www.adobe.com/products/fireworks/faq/?anonymous_element_1=4
And you'd want to get the recent updater:
http://www.adobe.com/support/fireworks/downloads_updaters.html
speedtigger wrote:
... It is probably not a huge problem to fix for an Adobe engineer.
If the feature worked under Vista but does not work under Windows 7, then that means that the problem probably lies somewhere in how the program communicates with the OS. The problem is not isolated to the tens - possibly hundreds - of thousands of lines of Fireworks code, but in how that code interacts with the Windows 7 APIs. To solve this problem is not the work of "an Adobe engineer." It's the work of a project team. It's the work of a project team which would have to be pulled off development of Fireworks CS5 for a few months to resurrect the old CS3 code, get familiar with it, and try to track down and solve the problem, then package up, test, and release a patch . By pulling resources off CS5 development, CS5 would be delayed or quality inversely impacted. Since CS3 is not a current product for sale, I can't see Adobe making this investment. There's no return on it, where there would be a return on getting a quality FW CS5 out the door on time.

Fireworks CS3: How to call a background

Similar Messages

Maybe you are looking for