Fireworks CS4 doesn't install with Windows 7 RTM

I have installed Adobe Master Suite into Windows 7 RTM without any problems.. but I have attempted many times to install Fireworks CS4 but it stalls while doing the initial system check at 90% done. I have set the 'setup' file to Vista compatibility with administrative mode... still stalls... Does anyone know if it's something with a real incompatiblity with Window 7 or something that I'm not doing (or missing)...
Any help would sure be appreciated.  (the client is getting pretty cranky now.... )

You say "Someone got it to install: http://forums.adobe.com/thread/451119?tstart=90 ".. I mentioned that the problem is with CS4  not with CS3... also the operatiing system stated here is the RTM ("Release To Market") and not the Beta..
I have downloaded all of the trial applications from Adobe and all installed perfectly with the exception of Firefox. This leads me to the assumption that the problem is with the application and not the operating system.
Back to the original post... has anyone managed to install Firefox CS4 using Windows 7 RTM or later ???
Thanks for reading this post...
uncledave1951

Similar Messages

  • 2011 MacBook Pro, 64 bit i7 quad core, upgraded to Lion OSx, Bootcamp installed with Windows 7, wanting to install Windows 8 (don't ask), tried downloading/installing bootcamp 5.0.5033, error message something similar to bootcamp doesn't support this Win

    2011 MacBook Pro, 64 bit i7 quad core, upgraded to Lion OSx, Bootcamp installed with Windows 7, wanting to install Windows 8 (don't ask), tried downloading/installing bootcamp 5.0.5033 (both on the mac/windows partitions (actually using a parallel to run Windows)), error message something similar to bootcamp doesn't support this Windows
    So the question is am I doing something wrong? Should I just try and install windows 8 through my windows 7 partition and see if I can use the bootcamp 5.05033. Or do I solely have to use the bootcamp to install Windows 8? I'm not too familiar with bootcamp and how it runs.

    if you're using parallels and full bootcamp then you're making it 100% more troublesome for youself then it needs to be
    bootcamp is running windows directly on the hardware this give full memory and cpu and 3d video game power
    running windows in parallels is running a virtual machine where one can't run powerful games and the like but one can have it in a window and change fast between osx and windows
    parallels as the only virutal machine (as far as I know) support not have the operating system as a file on the osx harddisk but can access a bootcamp parition as virtual machine but without the benefits bootcamps provides
    it's a service parallels provide for those who want both to play games in normal bootcamp and sometimes use windows in a virutal machine
    just install it like a normal virtual machine and you need not worry about bootcamp drivers and the likes
    plus it would mean that the windows part would be a part of the timemachine bacup of osx
    which it is not when it's in bootcamp

  • AT-AO-10 doesn´t work with Windows 2000

    I have an AT-AO-10 board that doesn’t work with Windows 2000. I have reserved two IRQs for legacy devices (non plug and play) in BIOS. The AT-AO-10 has got assigned these IRQs, a DMA and a base address that are free, and there aren’t any hardware conflicts, but the board doesn't pass the MAX's text.
    In Windows 'Information System', the board is shown in 'Forced hardware', but I don’t know that is a problem.
    If the board is unplugged, error messages are the same.

    Hello;
    You didn't mention what version of the NI-DAQ driver you are using over there. Anyway, my suggestion to you is to uninstall the NI-DAQ driver you have installed, remove the board, reboot the machine, download and install the latest NI-DAQ version (6.9.3) from NI web site.
    Try the installation with the new driver, and if that is still not working, the best bet is to try the same installation on a different machine to double check if the hardware is not defective.
    Regards
    Filipe A.
    Applications Engineer
    National Instruments

  • Fireworks CS3 doesn't work in windows 7

    Hi Guys, I have used a version 9.0.0.1188 of Fireworks CS3 for a while in my PCs with OS Windows XP and Vista Home without any problem, but now I have a new PC with windows 7, and I can open Fireworks CS3, but then I can't open old files, and I can't save my new works. That is what I have noticed for now. Could it be something related with windows 7?
    The Pc has Intel Core 2 Duo T6600 2.2 Ghz, 4.0 Gb RAM, windows 7 Home Premium. Please, some help will be appreciated.
    Thank you.

    Thank you Sarthak,
    I downloaded the patch and the problem continues. I will give you the maximum details about my fireworks. I have a copy of Fireworks CS3 in my flashdrive provided with licence from my school to be used in homework task. I have a desktop with XP...in that pc I can open the application directly from my flashdrive or from a copy I did of fireworks CS3 on my desktop in that pc, and all the application works fine. I can do exactly the same from another Laptop with windows vista, and everything is working fine as well.
    What I trying to do now is open the same application Fireworks CS3 from my flashdrive or from a copy I did on my desktop in another different Laptop with just one week new coming with windows 7. I can open the application directly from my desktop icon or from my flasdrive, BUT after that, I can't open files or save my new work....even when I close the application, a window shows up asking me if I want to save my work, and if I click YES, it still doesn't allow me, because when I try to close the application again, the same message shows up. Even worse, sometimes the application closes by itself without any command.
    I opened the Fireworks 'properties' to set Compatibility with window XP SP3, and didn't work, the same problems remains. That is what I can tell you for now. Thank you.

  • How to use airport time capsule on a dell portable pc with windows 7 taking in consideration that Time machine doesn't run with Windows ?

    how to use airport time capsule on a dell portable pc with windows 7 taking in consideration that time machine doesn't run with Windows ?

    TM does not work like that.
    If you want files to use later.. do not use TM.
    Or do not use TM to the same location. Plug a USB drive into the computer and use that as the target for the permanent backup.
    Read some details of how TM works so you understand what it will do.
    http://pondini.org/TM/Works.html
    Use a clone or different software for a permanent backup.
    http://pondini.org/TM/Clones.html
    How to use TC
    http://pondini.org/TM/Time_Capsule.html
    This is helpful.. particularly Q3.
    Why you don't want to use TM.
    Q20 here. http://pondini.org/TM/FAQ.html

  • TS1717 Trying to download iTunes onto PC installed with windows vista. Download keeps getting to 99% with 1 second remaining and then freezes / does nothing? Any help appreciated.

    Trying to download itunes onto PC installed with windows vista. Download keeps getting to 99% with 1 second remaining and then freezes / does nothing? Any help appreciated.

    I solved the problem! The updates orignally were downloaded to the C: drive of the server. I've since moved them to the E: drive and for some reason the Content folder in IIS didn't change the file path to the new WSUScontent folder.
    The root cause for this was failing to use the UTILITY designed for this very purpose.
    I edited the virtual directory settings in IIS and was able to put the correct path in.
    You still need to use the UTILITY.. to fix all the other stuff you're still missing.
    In the %ProgramFiles%\Update Services\Tools folder...
    WSUSUTIL MOVECONTENT E:\WSUS E:\WSUS\MoveContent.LOG -SKIPCOPY
    This problem was caused by moving the WSUS updates to a different local drive.
    No. This problem was caused by IMPROPERLY moving the WSUS updates to a different local drive.
    Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
    SolarWinds Head Geek
    Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
    My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
    http://www.solarwinds.com/gotmicrosoft
    The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

  • My i pod nano first generation doesn't work with windows 8

    My i pod nano first generation doesn't work with windows 8

    Howdy yvesmd,
    Thanks for using the Apple Support Communities.
    If your iPod nano is not being recognized in iTunes on your Windows computer, then I'd like you to please follow the directions in the link below.
    Apple - Support - iPod - iPod nano Troubleshooting
    Cheers,
    Alex H.

  • Fireworks submenu doesn't appear in windows 8 phones

    fireworks submenu doesn't appear in windows 8 phones but works on everything else, as far as i know. any solutions?

    thanks, it was my clients phone but i tried it on another phone and it worked but it's a bit tricky... you sort of have to press it just right or it disappears. anyway, i did an alternate site without the submenus for phones.

  • I cannot get the Elements 12 to install with Windows 8

    I purchased Elements 12 just the other day, it downloaded and now I cannot get it to install with Windows 8. When I try to open it, nothing happens. Please assist. Thanks.

    right click the installation file and click "run as administrator".
    if that fails do you have bitdefender av?

  • Fonts installed with windows are not listed in acrobat 8 professional

    Fonts installed with windows are not listed in acrobat 8 pro, what do you need to do to make them availabe in the program

    If you have Word installed, make a simple PDF from Word that has text set in Tahoma, then print to the 'Adobe PDF' printer.  Open the PDF file you just created, then hit Ctrl-D.  In the Fonts tab you will see what font the PDF file want to use and what font it actually uses.

  • Share Experience - T400 pre-installed with Windows 7

    Hi,
    I have recently ordered a new T400 pre-installed with Windows 7. I am yet to receive my laptop which I am eagerly waiting for, however, I would like to know what has been the experience (good / bad) from the people who have already received thier systems. This will help me check out on those aspects when I receive my system.
    Not sure whether it was a good choice to select 32 bit OS -> Comments please.
    Thanks in advance.
    Following is the configuration that I have ordered for as it appears in my order status
    01. INT.CORE2DUOPROCT9600
    02. GENUWIN7PROFES.32
    03. GEN WIN 7 PRFS 32 US EN
    03. 14.1 WXGA+ TFT, W/ CAMERA
    04. INT.GRAPH.MEDIAACCELX4500
    05. 3GBPC3-8500 1067MHZ2DIMM
    06. KYB US ENGLISH
    07. ULTRNAV(TRP+TOUCHP)FINGERP
    08. 320GBHARDDISKDRIVE,7200RPM
    09. DVDRECORD.8XMAXDUAL,ULTBAY
    10. EXPR.CARDSLOTXN7-1M.CARDR.
    11. INTEGR.BLUETOOTH PAN
    12. INT.WIFI LINK5300
    13. INTG.WIR.WIDENET UPGRAD.
    14. 4 CELL LI-ION BATERRY
    15. BLUETOOTH W/ANTENNA
    16. INTEG.WLESSANTENNA:14.1"

    fundoo77 wrote:
    Not sure whether it was a good choice to select 32 bit OS -> Comments please.
    IMNSHO, always go with a 64 bit OS.  With Win 7 32 you will probabaly be able to use all of your RAM, but if you add more RAM at some point you won't be able to use it without going to a 64 bit OS.
    A 32 bit system can address 4G of address space but Windows tends to reserve the top 1G (more or less) for addressing installed (and future) peripheral devices and graphics card RAM.  Any RAM above ~3G simply goes to wast.
    Just my $.02.  You asked...
    Z.
    The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc.  The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • Beats audio doesn't start with windows

    Hi,
        beats audio doesn't start with windows. when i log into windows, no beats icon shows in the notification area.
    it only works when i go to Control Panel and open up beats audio control panel, then the icon shows up.

    Hi @MadGrin 
    Welcome to the HP Forums!
    It is a terrific place to find answers.
    For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
    How Do I Find My Model Number or Product Number?
    When I checked the driver page for DV5000  I noticed it came with either XP or Vista.
    Have you checked for any HP  bios updates for your notebook?   If not you could try that but please be aware that updating the bios does have a potential to cause damage. For this reason I suggest contacting HP support for assistance with that process .
    Updating the BIOS
    Please call our technical support at 800 474 6836. If you live outside the US/Canada Region, please click the link below to get a support number for your region.
    World Wide Phone Support
    Have you checked compatability for Windows 8.1.  Windows compatibility Center
    There is a option to scan your computer to check if your apps and device work.
    Have you done all the updates for Windows 8.1?
    Good Luck!
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

  • Install disk doesn't work with Windows Vista

    I just bought a new HP Color LaserJet Pro MFP M277dw and the install disk isn't compatible with Windows Vista.  Apparently there's no ful feature option for Windows Vista on an HP laptop.  After several hours of work I downloaded several drivers and got the printer to print, but the scan function doesn't work that well without the HP software which hasn't been created for Windows Vista.

    I am having a very similar problem but do not have an answer either.  I am running an X61 Type 7676A12 with a Lenovo ACP50 port replicator FRU part number 40Y8160.  I am running Windows XP Pro.  The port replicator has never been very great and would not restore the external monitor picture properly when the laptop had been in sleep mode however it was serviceable if not optimal.  After downloading and installing the October MS security updates the machine would get a BSOD when the port replicator was plugged in.  Remove the replicator and reboot and it worked ok.  Plug it in again and BSOD.  I tried upgrading the drivers from 5.1.4a to 7.1.1.03Aug07 and then to 7.1.2.  No go.  Emailing Targus with the problem got no response.  The port replicator is now relegated to my junk heap of useless rubbish.

  • HP Pavilion P2-1013w Desktop PC - UEFI Install with WIndows 8.1 Pro RTM causes hang

    I have an HP Pavilion P2-1013W Desktop PC with the UEFI enabled bios.
    With Windows 8.1 Pro RTM Build (MSDN Download available now from Microsoft - Released September 17th 2013 - Again,. this is 8.1, a.k.a. Windows Blue RTM)
    SATA Mode is set to AHCI
    BIOS is UEFI Enabled
    I boot from the Windows 8.1 Pro USB Installation Media using the UEFI: USB Storage option, Windows Setup starts. I get to the partitions screen, remove the partitions then click New. Windows Setup creates the 4 Partitions (Recovery, MSR, System and Primary) as expected.
    When I click Next and Setup begins to copy files, the system locks up. The mouse pointer stops moving, keyboard is unresponsive, and it will sit at 0% for as long as it's left on.
    After checking, Microsoft makes a few notes about the requirements. Setup will not run if the OS does not match the UEFI 'bitness'. If this were the issue, I would get a text-mode message about it being the wrong architecture. I don't get that. I get the install wizard, so it is supported.
    http://technet.microsoft.com/en-us/library/hh824898.aspx Has more information.
    And I suspect this is a version problem as the original Windows 7 install was a UEFI install, not Legacy. It appears the BIOS firmware I have installed is not compatible with Windows 8.1.
    Will an update be made available? Or will I have to revert to WIndows 7 UEFI, and upgrade?

    Hello JODYL1,
    Please click here to check for any updates that are available.
    Click the KUDOS star on the left to say “thanks” for helping!
    Please mark a reply “Accept as Solution” if it solved your issue so others can find it.
    I work on behalf of HP.
    I worked on behalf of HP.

  • Media Encoder CS4 doesn't work with Premiere (pic related)

    Oh hai!
    I just got Adobe Master Collection CS4 and my Media Encoder doesn't work with Premiere CS4. When I try to export the file, Encoder starts normally. Then I click "Start queue" and Encoder starts loading. Loading takes almost five minutes, which is a long time, because my project is very simple. After that nothing happens, just a warning sign appears. When I click it open, some kind of log file open and it says:
    Encoding failed
    Could not read from the source. Please check if it has moved or been deleted.
    And I didn't deleted anything. So what does that mean? Why that "Source Name's" path is different than my project files path? Can this problem relate that somehow?
    I have also another problem with Premiere CS4, maybe there's a link between these two problems. I can't get Premiere projects linked to open in Premiere CS4. When I right-click the project icon, and click “Open with…”, I can't find Premiere from the list. When I click "Browse", I can find Premiere.exe from my computer, but if i doubel-clicked it, nothing happens. It won't appear to the list or anywhere else. Or have I missed something? So now the project files are linked to open in After Effects. Of course I can open projects from Premiere, but how do I get them open straight from file?
    I have long experience using Adobe Premiere and this is the first time I got this kind of problems. I have also downloaded new updates for Premiere and Encoder, this didn't help. Does that matter, that I didn't installed Premiere in C-drive? However it's in my computers internal drive, I have divided my hard drive for five parts, one part contains all of my softwares. My scratch disks are in different hard drive (external), does that matter? I tried different location, but that didn't help.
    Please help, I can't do any video editing, because of this problem. And sorry for my english, ask if you didn't understand something. =)

    Hello, this is terrible problem, which i found in CS 6 softwares ...
    solution i found only working, is uninstall and reinstall full package.. but it is not all,
    you need to do BRAND NEW admin account in windows, and install it there.
    that means, i could not export after repair from encoder in my original account never more (!!)   .. this is really terrible way how to repair this issue, because :
    1.by reinstalling of software, client WASTE HIS TIME
    2.by necessity to begin work in another windows profile you again WASTE YOUR TIME because of learning and migrating all other profile modifications, which i see really unaccpetable. Adobe means, this solution of repair is ok, and they did not do till today any steps of creating some "clever" solution.
    I ask everybody, who will meet this issue in future, guys, please, complain about this situation, give "BUG Report" to them, and write "feature request" to them , in the way of creating some repair tool, which check actual  "broken" connections between encoder and premiere, which refuses to "take material" from it and encode, and REPAIR it automatically..  
       I am not IT, but ..does it seems so hard to create this ? Adobe IT developers should know their systems, and should create such utility tool really easy.
    History of this problem and detailed description, HOW i did "repair" this. With wasting of app 2,5 days of my working time :
    1. after repairing "error 5" problem , i solved it by reinstalling the suite from the new admin user profile (profile B) . 
    I continued my work on my normal working windows profile . (profile A)
    Every cooperation (AE+Pr, export media via "queue" to Encoder) was working fine . . .
    2. suddenly it stop working (without knowing any possible reason - i did not do installations )
    and showed in error export log file :
    "Could not read from the source. Please check if it has moved or been deleted."
    3.repair via procedure(procedure "a"):
    i did this procedure on the profile B (profile from last time installation of repairing problem error 5)
    I did these steps :
    a-uninstall master coll suite
    b-i used Adobe cleaner tool (remove ALL)
    c-removed raw directories in locations
    •C:\Program Files\Adobe
    •C:\Program Files(x86)\Adobe
    •C:\Program Files\Common Files\Adobe
    •C:\Program Files(x86)\Common Files\Adobe
    •C:\ProgramData\Adobe
    d-removed these links from registry file
    •HKEY_LOCAL_MACHINE\SOFTWARE\Adobe
    •HKEY_CURRENT_USER\Software\Adobe
    •HKEY_LOCAL_MACH INE\SOFTWARE\Wow6432Node\Adobe
    •HKEY_CURRENT_USER \Software\Wow6432Node\Adobe
    e-restarted the PC
    f- newly installed the Master Coll CS6
    g-update the software
    result of repair of "3" : problem still exists
    4.Ok i find out after coordination with support, it should have been created  ANOTHER NEW admin account.
    4a:so i did the same procedure (uninstalling) in profile B
    4b: and then i created brand new admin profile (profile C)for INSTALLATION of software
    4c: restarted the pc (and did not updated it yet)
    result :
    ==exporting of any sequence/raw/AE link video material from premiere via "queue" (Encoder) (profile C) : export WORKS
    ==exporting of any sequence/raw/AE link video material from premiere via "queue" (Encoder) (profile B) : export WORKS
    ==exporting of any sequence/raw/AE link video material from premiere via "queue" (Encoder) (profile A) : export DOES NOT WORK ! ! !
    (in profile A, is possible to export some raw video material in encoder which is imported to it via "drag and drop)
    problem i see:, i have my basic profile A, which i am interested to work, because of all my directory modifications are in there..
    this issue should be some "broken" connections between encoder and premiere, which refuses to "take material" from it and encode.
    what i expect :
    to get from Adobe some repair tool, which automatically checks these connections and repair if necessary, without necessity of founding the new profile and reinstallation of whole software.. this is madness !
    what i do NOT expect from Adobe:
    to get from Adobe advice of kind : you have to reinstall full software in new admin profile. sorry , we do not know the solution, because we do not know, how do behave our software.

Maybe you are looking for