Fireworks CS4 PC version won't recognize my .ase file.

I can download my kuler swatches as an .ase file without problems. But when I go to Fireworks, I can't load the file into the Swatches palette. I tried "Add swatches" and "Replace swatches" in Fireworks, but Fireworks will only allow me to look for an .act or .gif file and doesn't see my .ase file.
Fireworks CS4 doesn't have a "Load swatches" option, nor does it have a color library function like Illustrator. I'm stuck! How do I get my .ase swatches into Fireworks CS4, PC version?

Thank you!
I'm figuring this out. Does your saved theme in the online Kuler need to be marked as Public? Can it be saved as Private and still be found when I work with Kuler in Fireworks and Illustrator?

Similar Messages

I have to upload video from my hewlett packard t200 camcorder to my mac. but mac won't recognize the camcorder files. i even bought flip4mac by tele stream which so far is useless. please help me use my camcorder with my iMac os mountain lion 10.8.2

i have to upload video from my hewlett packard t200 camcorder to my mac. but mac won't recognize the camcorder files. i even bought flip4mac by tele stream which so far is useless. please help me use my camcorder with my iMac os mountain lion 10.8.2
i tried to get the installation disc for the camcorder but mac wont' recognize it becaue it is windows based i guess.
i just bought the camcorder a few months ago and when my computer crashed thought i'm finally getting a mac...it's been a costly venture which has resulted in more frustration than before my pc.
now the things i want to use with my mac that i thought would be even simpler...are not even useable...
help

That camera shoots H.264 in an .avi wrapper.
You will have to transfer the files via the Finder.
Get a free copy of MPEG Streamclip and convert them to QuickTime .mov using the H.264 codec if you are presumably editing in iMovie.
Note that your list of video codecs won't look like mine as I have Final Cut Pro, but H.264 is definitely an option for you.

Bridge 'get photos from camera' stopped working and Bridge won't recognize my DNG files anymore

So, I've got Bridge set up to get pictures from mem.card whenever I insert one in my laptop (win. 8.1). A week ago I installed Sony's PlayMemories. Without asking me it hijacked Bridge's task of getting pictures from my cards. What's worse, I tried to fire the 'get photos from camera' function manually from Bridge. Bridge starts working, but nothing happens. I uninstalled PlayMemories and reset Bridge, also told my laptop to run Bridge whenever I insert a card. Still nothing happens and I still can't get the 'get photos' function to run manually from Bridge. Anyway, I can still rund the DNG converter to get my pictures, but today Bridge won't recognize my DNG files - worked fine yesterday. I downloaded CS6 from this link https://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html and tried to run the installer, but it doesn't seem to do anything. Maybe I need to do a full uninstall off CS6 for it to do anything..? Anyway, if any of you guys could help me with my Bridge/CS6 issues I'd be grateful. I've got 3 sets of concert photos and a snowboard comp. shoot I need to finish this week
CS6 running on windows 8.1

Re-install of PS CS6 resulted in the following errors:
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 3 error(s), 1 warning(s)
----------- Payload: {CFA46C39-C539-4BE9-9364-495003C714AD} Adobe SwitchBoard 2.0 2.0.0.0 -----------
WARNING: DF029: ARKServiceControl::StartService: Service not started/stopped SwitchBoard. Current State: 0 Exit Code: 0 Service Specific Exit Code: 0(Seq 1)
----------- Payload: {C41A769E-27ED-44F7-8A11-F2E32F538E05} Adobe Linguistics CS6 x64 6.0.0.0 -----------
ERROR: DF024: Unable to move file at "C:\Program Files (x86)\Common Files\Adobe\Installers\adobeTemp\{C41A769E-27ED-44F7-8A11-F2E32F538E05}\_249_92e651345849 4a10e8de711f4c5be8e5" to "C:\Program Files\Common Files\Adobe\Linguistics\6.0\Providers\Proximity\11.00\araphon.env" Error 1392 The file or directory is corrupted and unreadable.(Seq 251)
ERROR: DW063: Command ARKMoveFileCommand failed.(Seq 251)
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Adobe Linguistics CS6 x64: Install failed
This doesn't really tell me much, anybody else got a clue what this is...?

Running Fireworks CS4 Trial Version after Using CS4 beta

I tried out the Fireworks CS4 beta some months ago, but after
getting tired of all the bugs, I uninstalled it and decided to wait
for the released Trial Version. I downloaded that today and
installed it, but when I try to run it I get a message that says
"The license for this product has expired." and then it quits,
never fully loading. I'm guessing this has something to do with the
CS4 beta I had previously installed and uninstalled. Perhaps I
didn't uninstall it properly, but now I need to know how to move
forward so I can give the release version of Fireworks CS4 and
proper evaluation.
Any ideas on how I can get the CS4 Trial Version
running?

Uninstall the trial.
Then dl/run the clean up script here
http://www.adobe.com/support/contact/cs4clean.html
Install trial again.

[SOLVED] sdlmame won't recognize 7-zip files

Hi,
I am trying to use sdlmame to play files compressed with 7-zip. But when I run sdlmame it reports that no games were found (mame.ini is pointing to the correct directory). I checked on mamedev and 7-zip archives are supported since MAME 0.145u1.
I have sdlmame 0.156.u0-1 installed. I am hoping someone can point out what I need to do for sdlmame to recognize 7-zip files. If I need to re-compile it and with what config? Thanks for any pointers!
Edit [Solved]: The issue was the directory name contained a space, I created a symlink to point to the game directory and specified the symlink in the mame.ini file. Sdlmame instantly recognized all the game files!
Last edited by KingX (2014-12-22 05:31:59)

[myth@mythbox ~]$ file 19xx.7z
19xx.7z: 7-zip archive data, version 0.3
The files work fine in windows with MAME. I can extract the archive as well without issue. One thing I haven't tried is extracting and re-creating the archive with 7-zip, I wanted to see if I missed a simple step before carrying that out.

DVD Studio Pro 1.5 Won't Recognize Any Video Files

Hello, everyone! I guess this might be a little prehistoric, but I really need help. I have the dinosaur, DVD Studio Pro 1.5, and for some reason it won't recognize any .m2v's, .mpeg's, or anything else. As I understand it, DVD Studio Pro 1.5 will only take MPEG-1 and MPEG-2 files, but whenever I use them, it says, "Error: Unknown File Type," in the Log.
Can someone help me? Perhaps there is a way to make it accept more than just MPEG-1 & 2?
Thanks so much!

Well, I used the requirements for Widescreen NTSC in BitVice. The requirements are given in the DVD Studio Pro 1.5 manual. However, when I went to drag the file into DVD Studio Pro 1.5, the log came up and said: ERROR: 480 is not the proper height for a PAL file.
So, I knew that it must only want PAL files.
Another problem:
To apply videos for a Motion Menu, I am supposed to click on the menu in the Graphical View, and go to "Asset" under "Picture," and select the video I want. The problem is, it won't show ANY .m2v's in the Asset drop box. It will show my Photoshop files, though. And, I'm sorry to say that those files you offered me didn't work either. (They didn't show up under the Asset drop box.)
[Thanks so much, by the way! They had NO trouble importing to DVD Studio Pro!]
Here's a picture of my computer and the missing files in the "Assets" drop box.
http://i171.photobucket.com/albums/u320/jgilbertproductions/ExampleofAssetDropBo x.jpg?t=1193959764
The "Scene Selection" Menu is selected, and the Inspector is displaying the information.
Message was edited by: Panther Mail & .Mac

Itunes deleted in computer update. New version won't recognize all CD music

As stated, computer upgraded by individual. Itunes did not come over. Songs would not play at all so I downloaded a newer Itunes than I had before (old version was at least 3 to 4 years old). Newer version installed was 7. All music on the computer in the itunes file was copied from personal CD collection (bought new from local stores over the years, nothing jacked or contraband). The CD music was "converted" to Apple specs as of 3 or 4 years ago and all played fine in the old Itunes. Most all of the music was recognized in the newer Itunes and playable but many were not. Noticed the playable ones listed twice so deleted the copy that would not play BUT all songs not listed twice. Did I interrupt some kind of verification/update somehow. I did not show anything running as an update, no wait or loading bars, etc. At any rate I know very little (obviously) about Itunes stuff, just what I learned when I originally copied the cd's to sync to my husband's ipod. I just want to play the music while I am on the computer and download to his Ipod Nano. Any help on how to "fix" the ones that won't play or resume any kind of "update" that might have been in progress would be appreciated.

itunes actually sells you music you "really" own
The iTunes Store has no "subscription" model; all tracks you purchase are yours forever. Most tracks in the iTunes Store now come without copy protection, though there are still tracks that are copy-protected and so can only be played on an Apple player or burned to audio CD (which will work as does any normal audio CD). You can tell the tracks that lack copy protection by the "+" symbol next to the price in the iTunes Store.
From there it's up to you whether it will be more cost-effective and desirable for you to purchase an iPod and those tracks you don't have in an unprotected format or to get another Zune.

Can't download itunes and my current version won't recognize my ipod.

Ok, so i updated my ipod and now i need to update my itunes in order for it to recognize it. The problem is everytime i download itunes it says it failed. I don't know what to do.

Hey dillpickle345,
Try the steps listed under "Empty your Temp directory and restart" here
http://docs.info.apple.com/article.html?artnum=93976
Then goto this page and save iTunes to the desktop.
http://www.apple.com/itunes/download/
Jason

Upgrade Failed now old version won't recognize IPOD

So the upgrade to 7 failed, I really wish I hadn't done it. Everything was fine before. I got a message that "Service couldn't be stopped. Please make sure you have access." So I cancelled the installation. I-tunes will still open, and my library is there (as long as I do this while the IPOD is not connected to my computer.) When I connect the IPOD, I-tunes freezed, and I can hear the IPOD sort of "turning over" or "clicking". I left it that way for like an hour last night, and I came back to a message that says the IPOD needs updating. I clicked ok to update and a new screen popped up that gave the option of update or restore but neither of those buttons worked. Just nothing happened when I clicked "update".
Any ideas what's going on here or how I can fix?
I still have songs ON my ipod and in my library, there is just no communication between the two!
Thanks!

Nope, I checked that one, and terminal services were aleady set at manual. Here's what I actually did: I ran the chkdsk utility, nothing wrong there; then deleted all the old ipod updater files; then finally itunes recognized the ipod and told me it was corrupted and needed to be resorted. So I bit the bullet (fingers crossed) and restored the iPod. The restore did what it should've and wiped out my music on my iPod. Then iTunes updated the iPod, and I left the whole thing going last night while the songs were in the process of downloading to the iPod. This morning everything looked great, all the playlists were in the menu under my iPod, so I ejected happily thinking everything was back to normal.
BUT THEN, when I got into my car to go to work, I clicked on a playlist which in iTunes contains many, many songs, but on my iPod now only showed one song. So then I went to artists, and only the artists whose names begin with A are on there. Any ideas? I can't imagine it's an issue with not being connected long enough, I mean it was left alone for about 10 hours!
Any help would be appreciated.
Windows XP

ITunes 7.3 won't recognize some mp3 files

I'm using iTunes 7.3 on a dual-G5 with Mac OS X 10.4.10. After upgrading, I noticed that some tracks were missing from my iTunes Library, even though they are in the iTunes Music folder. When I tried to reimport these files (by dragging them from the Finder the iTunes Library), nothing happened.
Special notes: My iTunes Music folder is not in Users/Me/Music; it's on a second local hard drive. Also, I'm not entirely certain that this problem started after upgrading to iTunes 7.3; it could have happened under an earlier version and I just didn't notice.
Investigating a little bit further, I discovered that the problematic files were all MP3 format, at least as far as I can tell. I checked them out in Media Rage (trial download) and found that their ID3 tags were empty. Now, let me point out that these were files that I ripped myself from CD, probably several years ago since I have used AAC for my more recent rips. I do know that these files and their ID3 tags worked fine and within the last year or so, which means that somewhere along the line iTunes destroyed the ID3 tags and stopped recognizing these files.
I confirmed that these files can play properly in QuickTime player. I also tried adding the ID3 tags back in using Media Rage (and ID3 v2.3.0), but iTunes still will not recognize them.
I also tried completely reinstalling iTunes, by deleting Applications/iTunes, Users/Me/Music/iTunes, and all the Users/Me/Library/Preferences plists associated with iTunes, and then downloading iTunes from www.apple.com, but this didn't solve the problem either.
PowerMac G5 Mac OS X (10.4.10)

I have the same problem.
I've had these songs in itunes & on my ipod before for awhile & they played just fine. I upgraded itunes & everything seemed fine, until I auto synced my ipod & I get this message saying that five files aren't copied to the ipod because the ipod won't play them. Then I try to play them in itunes & itunes won't play them, even though they show up in the library & are MP3s. Quicktime player & VLC both play these files still...
I have no idea what could cause the error for these random 5 songs, which are not related to each other & come off the same CDs as other songs which are still able to be played...

IDVD won't recognize any QuickTime files...

Suddenly iDVD doesn't recognize any of the files I had created previous DVDs with, nor is it recognizing new .mov files I have created. QuickTime, FCP, and DVD Studio Pro all still recognize and use the .mov files.
Has anyone else had this problem?
I have deleted iDVD and reinstalled, but the problem persists...
Any help out there?

Okay, I got on under my troubleshooting account, in which I've never even opened any of the iLife apps, populate the iPhoto library with some images off a memory stick, ditto for iTunes, and 2 of the Quicktime Movies that won't work under my regular account.
Created a brand new iPhoto slideshow and exported it through the 'share with iDVD' option as before. At the end of the slideshow export, I got an error message from iDVD saying that there were issues with the build and the movie was not a valid one, something like "it is not a movie". But, there it is, sitting in my Movies Folder as a Quicktime Movie AND I can play it with Quicktime.
So I try to do a new iDVD. Select the Revolution Template, drag in images from the iDVD media browser Photos, drag in music from the iDVD media browser Audio. All okay. Then I do the 'add a movie' choice, and drag the Quicktime Movie into the iDVD menu as before, and as before, it cannot 'find' it. I use the 'find file' again, and there it is, right where iDVD cannot see it. I select and open it, but iDVD responds by moving that 'find' to the bottom of the list and I'm caught in a gerbil wheel of 'finding' files that are right in front of me in the Finder, but can't be seen by iDVD.
I also restored all preferences from my last Time Machine save for iDVD, iPhoto, and the Media Browser. Tried it all again. No luck.
Any ideas?

Gracenote CDDB Won't Recognize Backed-up Files

I backed-up my Purchased Music to DVDs, then removed them from my hard drive. When I tried to import them from the DVDs back to the hard drive, Gracenote CDDB wouldn't recognize them. Any ideas so I don't have to manually enter this info?

Matthew is correct where regular Audio discs that you buy in stores are concerned.
The reason CDDB won't find any information on your disc is because you burned a Data disc and not an Audio disc. CDDB does not recoginze Data discs. But since you already had all your ID3 tags customized in the files when you burned them to Data DVD all you have to do is use the Add To Library command in the File menu and iTunes will read the ID3 tag information.
Also, when working with music that is already in a "lossy" format you cannot use the Import command, only the Add To Library command. This also goes for AIFF or WAV files that you have on your Hard Drive that you want to put into iTunes.

My Creative Suite 5 won't recognize In Design Files? I have to open them within the program?

I have creative suite Design 5 premium and when I click on an Indesign file within Windows XP in My documents, it won't find the program to open the document. IF i open a file directly from the in design software, opens up fine. I've checked file types, In Design 5 is the default, anyone came across this?

Sounds like you had an earlier version installed and uninstalled it after installing CS5. Easiest fix is to reinstall CS5.
Bob

ITunes Won'r Recognize Some MP3 Files

I have 2400+ MP3 files in My Music folder. All were ripped using the same DVD-+RW drive, same software (WMP 10.0) and same settings (192Kbps). All were ripped within several days of each other, all from purchased CD albums.
When I tried to add these files to my brand new iTunes library (in order to transfer to my brand new 5G iPod) iTunes only recognized 1802 files. I attempted to manually add the files that weren't recognized, no joy (no error messages either, nothing). I researched the issue; I made sure the file folder permissions were appropriately set; I scanned the hard drive for physical defects; I defragmented the drive; I ran several ID3 tag verifier utilities; I played the "problem" MP3 files on every other music player software I own (WMP 10.0, RealPlayer, MusicMatch) and they played flawlessly. Lastly, I attempted to re-rip the files directly to iTunes from the original CDs; that worked, so I can safely assume there are no copyright or protected-file issues to deal with.
Short of re-ripping 600+ music files to iTunes manually, does anyone have any suggestions as to what I can do to get these files onto iTunes?
HP 7160 Windows XP
HP 7160 Windows XP

I have the same problem.
I've had these songs in itunes & on my ipod before for awhile & they played just fine. I upgraded itunes & everything seemed fine, until I auto synced my ipod & I get this message saying that five files aren't copied to the ipod because the ipod won't play them. Then I try to play them in itunes & itunes won't play them, even though they show up in the library & are MP3s. Quicktime player & VLC both play these files still...
I have no idea what could cause the error for these random 5 songs, which are not related to each other & come off the same CDs as other songs which are still able to be played...

Final Cut Express HD won't recognize .mov / quicktime files.

I have a MacBook Pro 13-inch with FCE3 installed. I'm using OSX 10.6.6. My camera doesn't put video out through a firewire, only usb, meaning FCE can't recognize it (to the best of my knowledge). So, to get around that, I uploaded the video through iLife '11 and converted all my video into one long .mov/quicktime file. When I try to import the video, I get a "file error" message.
Any tips on how I can get the video form iMovie to FCE? If it means not using quicktime, I'm fine with that, too.
Thanks!

Well, to repsond to Ian, I don't have FCE4. I have FCE3. I'll upgrade eventually, though.
And I have a Cannon FS20. I did what you said in the quicktime player. Here's the format:
"H.264, 960 x 540, Millions Linear PCM, 16 bit little-endian signed integer, 2 channels, 44100 Hz."
The video plays fine in iMovie '11. I even tried the "share with Final Cut" tab in iMovie, but the video still wouldn't work in FCE3.
But I might add that it's not just the video from my camera that doesn't work in FCE3. It's all quicktime video. Even video that worked in FCE3 on my old Powerbook G4 now don't work in the same in FCE3 for my MacBook Pro.

Fireworks CS4 PC version won't recognize my .ase file.

Similar Messages

Maybe you are looking for