Fireworks CS6 is always pixelated - please help!

Whenever I open Fireworks (CS6) the whole page is pixelated including all adobe text around the edge, for example the word 'properties' etc. Dreamweaver, Photoshop, Flash etc. don't do this so why does Fireworks?Fireworks

You are working on a Mac, correct? Fireworks does not support retina screens very well, so it looks fuzzy.
And no, Adobe will not solve this, because Fireworks is no longer developed or maintained since May 2013.

Similar Messages

My Refine Edge in Photoshop CS6 has STOPPED WORKING, please help!

Photoshop CS6
Windows 8.1
I have been using refine edge with no problem for months.
everything worked great!
I was able to extract out hair and edges very, very, very well...
but about 2 weeks ago...something changed... the refine edge brush no longer works.
When I click on Refine Edge... instead of a brush icon, I get the CIRCLE with a SLASH and my system keeps dinging because the tool is just not available.
I deleted my preferences...but it is still a problem
NOW... when I adjust the sliders, i don't see a preview of the adjustments...
Please help!!!!

no difference.
i have tried to check and uncheck everything...
if i adjust the sliders, i get NO Preview... but when i click OK, the resulting photo has been completely ruined by the tool...
I tried deleting preferences...no change
the weird thing is that this problem was very sudden. Just a few weeks ago, I was using refine edge with NO PROBLEM. it is my GO TO tool for extracting people out of pictures...
but then one day, it just stopped working...
Do i need to reinstall CS6???

Need help with premiere pro cs6 having performance issues please help

need help with premiere pro cs6 having performance issues please help

Welcome to the forum.
First thing that I would do would be to look at this Adobe KB Article to see if it helps.
Next, I would try the tips in this ARTICLE.
If that does not help, a Repair Install would definitely be in order.
Good luck,
Hunt

Dreamweaver CS6 - internal data error - PLEASE HELP!

Hi,
I'm experiencing an internal data error on Dreamweaver CS6.
I've tried all the things on the forums like deleting your cache, if that's not working deleting the whole cs6 folder, I've reinstalled and still its happening.
Very frustrating, need to update clients websites and I can not connect.
Please help!!!!
Regards Stephanie

Which operating system?
Is DW installed on your primary hard drive?
When DW starts acting weird, the first thing to try is Deleting Corrupted Cache in DW
http://forums.adobe.com/thread/494811
If that doesn't help, try Restore Preferences
http://helpx.adobe.com/dreamweaver/kb/restore-preferences-dreamweaver-cs4-cs5.html
If all else fails, use the CS Cleaner Tools below to wipe CS6 off your hard drive followed by a software re-install.
http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html
Nancy O.

Can't open IDML files on CS6 or 5.5 Please help

I just purchased and downloaded IDCS6. I have updated all the plugins. I "saved as" IDCS4 or old, a document I was working on. Now I can't open with either version of ID. Please help! How can I get this document to open? I am using Windows, 64-bit OS

I received the .idml fileyou sent, and it won't open here, either. It looks to me as if it may not be complete. Since you didn't send the .indd file I can't do much more.
I see though that you managed to get the file to export properly. In spite of it being listed now under the Save As menu, making .idml files is an Export function and it is a background task so even though the dialog closes and you can go back to work immediately, the file may not be ready. There is a samll inidcator icon of scrolling horizontal lines that appears on the right of the Menu bar while background tasks are in progress, and you can open the Background Tasks panel from Window > Utilities for a real progress bar. I suspect you may have simply tried to open the original .idml file before it completed.
As far as opeing as Untitled, that unfortuantely, is expected behavior, and it is a pain in the neck. You are creating a new file as far as ID is concerned, so it names it Untitled. When you save, you should probably use a new name to avoid overwriting the original .indd file.

DVD from HD720 is extremely pixelated- Please Help

Hi
I've shot a project with HD (HM171 on a P2 Card) and edited as DVCPRO HD 720
I've made the film as a multi image (3 layers/images on one screen) and tried exporting to DVD Studio Pro on a number of formats but all results are very heavily pixelated. (3 layers each at 27% size)
There is a major amount of jagged edges and blockiness to the images and I don't know how to fix this.
I've exported a normal single channel/single image piece at normal size and it's looked ok.
The settings I've used are to let DVD Studio Pro encode in SD settings by creating a quicktime export using the current FCP sequence settings.
I've also encoded through compressor using best quality DVD settings mpeg2 2-pass and still it looks blocky
Please can anyone help me! I'm so stuck with this

How's the quality of the FCP exported self-contained movie?
In Compressor, make a duplicate of the Best Quality 90 minute preset, turn ON Frame Controls and set the Resize to Better or Best, select Progressive and Better.
What frame rate do you edit at? If your trying to compress 60p MOV down to 30 DVD, Compressor may struggle to maintain quality. Better to start with 30p or better yet 24p in FCP

Audio is not always working, please help

Hello,
I have PE9. I pull a video to the editing area and it will play the video for a few sec. and then I don't have audio. It is a hit or miss if I am going to have audio to start with. On the timeline it shows that I have audio with my video I just can't hear it.
I also have noticed that there is an event and it says "an unspecified error occurred while performing a conf...." It will not let me click on details. Any help with this would be fantastic.
Thank you.

With those converted WMV's, which program was used to make the conversion?
What were the Audio specs. for that conversion?
As a test, rip the Audio from the converted AVI files with an audio editing prograrm, like the great, free Audacity. Save that as a PCM/WAV @ 48KHz 16-bit, and then Import that into PrE. VERY IMPORTANT - let that PCM/WAV file conform completely. With a PCM/WAV @ 48KHz 16-bit, it should not take very long, but do NOT touch the computer, until Conforming is complete. Drag that WAV file to an empty Audio Track, and align with the Video. This is easier, if you have Snap ON. Test. If this works, then you can use Audio Mixer to Mute the Audio Track with the muxed Audio, or you can Alt+click on it and Delete it. I like leaving it, but you might want to clean up the Timeline a bit.
Please report with the full specs of your conversion, plus how that test works.
Good luck,
Hunt

PP CS6 crashes when opening - Please help!

When I attempt to open PP CS6 it displays the initial launch screen and then says "Adobe Premiere Pro has stopped working." Before posting this question I tried:
1) uninstalling and reinstalling PP CS6
2) uninstalling and reinstalling Creative Cloud manager
3) running in compatibllity mode
4) launching PP CS6 while pressing shift and alt keys (to reset preferences)
5) updating video drivers
My other Adobe apps launch and operate perfectly. Any advice is appreciated!

What are the specs on your system?
If you're on Windows, please update the driver for your processor. That step has resolved a crash-on-launch for several customers.
Do you have any codec packs or third-party effects or transitions installed?
In the bottom left corner of the "Premiere Pro has stopped working" dialog, there should be a link that reads "View problem details." Please click that and paste just the top few lines here (see the example here: http://forums.adobe.com/thread/1261230?tstart=0)
These threads might have some other suggestions:
http://forums.adobe.com/message/5533149?tstart=0#5533149
http://forums.adobe.com/message/5484148#5484148

When i installed windows 8 my photoshop cs6 flashes and blinks, please help

When i installed windows 8 my photoshop cs6 started to blink and flash. Is there an update i need to do ? please help

When installing the audio driver, was it installed by following the prompts or in compatibility mode as outlined here?
Based on the Software and Drivers page for this unit, the unit was not tested and certified for Windows 8. This means that some functionality may not be the same since the unit was not designed for Windows 8. See this site for information and to find out if it has been tested for Windows 8.
If the sound driver has not been installed in compatibility mode, then I recommend using the Windows 7 64bit driver found here and using the linked steps above to install it in compatibility mode.
Let me know what happens.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Saving my design in CS6 is now corrupted - please help!

Hello,
I saved a design in CS6 which recorded the save as 100% completed.
However when I now open the document I get an image of a red line (left screen shot).
I have also tried to open this in Fireworks and the preview is correct (right screen shot) but when it opens in full I get the red line again.
Does any one know what the issue is and whether this is retrievable as this design is the accumalation of two days work?
Kind regards.

It doesn't sound promising. I can see it was saved as a PSD, in which case I believe the preview is an embedded JPG, so not necessarily indicative of the file integrity. Does its file size on the HDD tally with what you’d expect?
It also looks like you are using Windows. Is that right, and if so, what version?

Fireworks CS3 Pop up menus: Please Help!

can anyone tell me how to properly link my drown down menus
on my popup menus in fireworks cs3. when i bring it in to
dreamweaver and test my it in my browser it doesn't work.

grynchman wrote:
> You need to export the entire thing (select all
elements) to images & html.
> Then open the html file in DW, copy the code and place
where you wish.
>
> I am new to FW - so this may be a wacky way of doing ti,
but it works for me.
>
>
>
Ideally, you need to run as far away from those menus as you
can, before
you try using them. From a maintenance perspective at least,
they are a
nightmare.
Jim Babbage - .:Community MX:. & .:Adobe Community
Expert:.
http://www.communityMX.com/
CommunityMX - Free Resources:
http://www.communitymx.com/free.cfm
.:Adobe Community Expert for Fireworks:.
Adobe Community Expert
http://tinyurl.com/2a7dyp
.:Author:.
Lynda.com -
http://movielibrary.lynda.com/authors/author/?aid=188
Peachpit Press -
http://www.peachpit.com/authors/bio.aspx?a=d98ed798-5ef0-45a8-a70d-4b35fa14c9a4
Layers Magazine -
http://www.layersmagazine.com/author/jim-babbage

How can I animate a bungee rope (timeline animation CS6 - no script)? Please help

Hi,
I'm going to be creating a Flash skyscraper web banner (CS6) which has a person bouncing up and down on a bungee rope, but I'm a bit stumped as to how I'm going to achieve this, the rope animation needs to look realistic, elastic with give, curving/bending and then stretching. But I need to do it manually as I'm not an ActionScript guy. Any advice, tips or techniques I can use would be greatly appreciated.
Kind regards
Mark

Chances are you will need to manage this as a frame-by-frame animation, using the drawing tools to manually change shapes and positions of the different objects.

Dead pixel - please help!

Hi,
I recently bought a 5800 and it has a dead pixel on the screen. I was really looking forward to getting this phone and I am now quite disappointed (and disgusted by the service I was offered here in Malta!). I returned it to the shop where I bought it and was told that I have to have at least 5 dead pixels for me to be able to change it. Is this true?
It is still under guarantee as it hasn't even been a month since the date of purchase. They tried to feed me so much bull (including: the laws do not apply for Malta and that i had to go back within the first seven days EVEN THOUGH it clearly says on the guarantee that I have a 30-day period from the date of purchase to take it back).
I really need to know what Nokia's policy is on dead pixels. I paid extra money for a 2-year guarantee from an authorised Nokia dealer, and yet it seems I do not have any rights at all :/
Thanks

Thanks for your reply
On the phone's user manual, the warranty at the back says that it is for "EU countries". Malta is in the EU and therefore the warranty applies to us aswell. Also, the guarantee (issued by Nokia's local agent) pretty much summarises Nokia's warranty.
But when I spoke to the (incredibly stupid) person who works there, she said that I have to have at least 5 pixels and that I am not eligble to having it replaced.
I understand that it is not Nokia. I've had Nokia phones before and I have never encountered any problem, which is why I opted for a Nokia again. I just wanted to check the facts because they keep telling me that Nokia will not accept a replacement of the phone with less than 5 pixels :s

Flash CS6 Actionscript 3 errors, please help!

This is my code, and I am having the following errors:
else is unexpected, expecting identifier, and expecting rightbrace before end of program.
I'm sorry if it's really ridiculously easy, I'm a complete noob at flash, and coding all together! In fact, this is my first day.
Could anyone explain what's wrong, and how I can fix it? I'm learning from books I bought from Amazon, and internet tutorials.
import flash.events.Event;
import flash.events.MouseEvent;
lolyoulostnoob.visible = false;
again.visible = false;
var lost = false;
var redo = false;
var health = 3;
var isLeft = false;
var isRight = false;
addEventListener(Event.ENTER_FRAME,hank)
function hank(e:Event){
if (bob.x < 54.9) {
else if(bob.x > 596.05){
     bob.x -54.9
bob.x 596.05;
if(isLeft){
bob.x -= 10;
     if(isRight){
        bob.x += 10;
var rand = Math.random()*550;
mc_1.y = mc_1.y + 10;
mc_2.y = mc_2.y + 10;
mc_3.y = mc_3.y + 10;
    if(mc_1.y >= 427.6){
       mc_1.y = -73.4;
       mc_1.x = rand;
       run = true;
if(mc_2.y > 427.6){
       mc_2.y = -73.4;
       mc_2.x = rand;
       run = true;
if(mc_3.y > 427.6){
       mc_3.y = -73.4;
       mc_3.x = rand;
       run = true;
if(health == 0){
    lost = true;
if((bob.hitTestObject(mc_1)||if.bob.hitTestObject(mc_2)||if.bob.hitTestObject(mc_3)) && run ){
       health--;
    run = false;
if(lost) {
    lolyoulostnoob.visible = !false;
    again.visible = !false;
    bob.visible = !true;
    mc_1.visible = !true;
    mc_2.visible = !true;
    mc_3.visible = !true;
    lost = false;
if(redo) {
    lolyoulostnoob.visible = false;
    again.visible = false;
    bob.visible = true;
    mc_1.visible = true;
    mc_2.visible = true;
    mc_3.visible =true;
    health = 3;
    redo = false;
again.addEventListener(MouseEvent.MOUSE_UP,p)
function p(e:MouseEvent){
redo = true;
stage.addEventListener(KeyboardEvent.KEY_DOWN,pressed)
function pressed(event:KeyboardEvent){
if(event.keyCode == Keyboard.LEFT){
isLeft = true;
    else if(event.keyCode == Keyboard.RIGHT){
isRight = true;
stage.addEventListener(KeyboardEvent.KEY_UP,released)
function released(event:KeyboardEvent){
if(event.keyCode == Keyboard.LEFT){
isLeft = false;
    else if(event.keyCode == Keyboard.RIGHT){
isRight = false;

There could be more, but this might be the one where the error is pointing...
function hank(e:Event){
if (bob.x < 54.9) {
} else if(bob.x > 596.05){ // you need a closing (right) brace before the else
    bob.x -54.9
bob.x 596.05;
Usually the error will indicate a line, so if you have that information you should only post the related code. You will find it beneficial to go into the Flash Publish Settings and select the option to Permit Debugging. THis can end up adding extra information to the error messages that you can include in your postings.

Siri-location services always on please help!!

On my iPhone 4s Siri has been on with location services enabled since I got it. Out of the blue the purple arrow next to my battery bar apeared and will not go away this means my phone is actively using location services which drains my battery faster . In settings it says Siri is the only thing actively using location services. How can I use location services without having the purple arrow constantly being there and only being there when I use Siri for something that requires location services

Ok that was a no go. But I previously had an issue where Siri couldn't connect to the network. On another forum I found the fix which was to:
1. Turn Off Siri - Location Services (Settings > Location Services > Siri > Off
2. Reboot the phone
3. Turn On Siri - Location Services
I did that just now and Siri has not used LS once. Then again, I haven't tried the, "How do I get home" command with Siri yet. It's a quick fix...for now.

Fireworks CS6 is always pixelated - please help!

Similar Messages

Maybe you are looking for