Fireworks CS6, was ok .. now crashes .. HELP!

I've been merrily using Fireworks CS6 for a while now (PC installation on vista ultimate 64bit).  Worked just fine and no problems.
But suddenly (like maybe within the past two or three days, if I launch it, the splash screen appears, loads the interface and sits waiting for me to either reopen a previous file, or create a new one.  So far so good.
As soon as I do either however, the software locks up and I have to head to Task Manager to kill it.
my older version of Fireworks is still on the machine, so I have used that instead .. which is ok of course .. but how can I get my CS6 version working again?
any suggestions will be warming welcomed.
thanks.
David.

spoke too soon, now Fireworks CS6 will start to launch until the splash says 'xxxs loading keyboard shortcuts'  (xx meaning seconds to wait I assume), it it then hangs.  Older version failed too .. so I am currently without fireworks ..and I have some projects arriving for which it would be REALLY hand to hav it working again.
HELP !!
all the other CS6 products seem to open ok ..
ps. actually running on Windows 7 Ultimate 64 just noticed

Similar Messages

  • It was fixed now crashing again on 64 GB iPod lasted four days only

    I tried every thing even went to Apple on the phone but it did not crash for four days on 6.1.3 now crashing again it crashes because of LOW MEMORY that what it says on diagnostic and usage on all apps plus I only got 8 apps on it and still got 53 GB left on it it in $59.00 rubberized protection case always on my bed never leaves the house it so protected it looks brand new now for $400.00 electronic gadget I assume it would be better than this when it was 5.0 it work fine I even had music on it 7,000 songs worked fine but took off all music just using for photos and 8 apps even my iPhone is crappie my Android S3 is way better than both of my Apple gadgets I notice Apple last only 3 months then you got to re-sync to computer every three or four months for all the money you pay their products they are all ways breaking down the only thing that really works well is their iPod 140 GB which I have also and 8 GB which didn't work after three months but they are good for music and photo taking though every thing else just crappie I think I have bought over $3,000.00 in iPods in four years from the Apple store

    Periodically double click the home button and close all the apps in the recently used dock. Then power off and then back on the iPod. This frees up memory. The 4G only has 256 MB of memory.
    next
    - Restore from backup. See:                                 
    iOS: How to back up           
    - Restore to factory settings/new iOS device.
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
      Apple Retail Store - Genius Bar

  • Fireworks CS6 is always pixelated - please help!

    Whenever I open Fireworks (CS6) the whole page is pixelated including all adobe text around the edge, for example the word 'properties' etc. Dreamweaver, Photoshop, Flash etc. don't do this so why does Fireworks?Fireworks

    You are working on a Mac, correct? Fireworks does not support retina screens very well, so it looks fuzzy.
    And no, Adobe will not solve this, because Fireworks is no longer developed or maintained since May 2013.

  • MSI Command center, was working, now crashes

    Hi, I've been running Command Center version 1.0.0.50, and it's been working just fine, suddenly since yesterday it's been crashing shortly after loading, also the CPU always reads as max speed(3.7ghz) and doesn't move from there, whereas before, it was reading the correct frequency, I've tried uninstalling, and reinstalling from my driver cd, and it doesn't fix the issue, I've also tried version 1.0.0.68 from the website, and it's doing the same thing.
    Also, just to note, other CPU frequency monitoring programs (CPU-Z for instance) are reading the frequency correctly, so I don't think it's a hardware issue.
    Additionally, my Avast A/V has suddenly decided that the "msiwmiservice.exe" file from the 1.0.0.50 version is a rootkit(I've verified that it's a false positive), but I can no longer run the 1.0.0.50 version at all without disabling Avast, because every time I install it from the disk, it immediately throws the offending file into the anti-virus chest. This doesn't happen with 1.0.0.68, as it doesn't contain the offending file, but it still crashes the same.
    Also, note that Avast and Command Center had been living together just fine for a couple weeks, right up until yesterday..... weird huh?
    I'd like to be able to run command center for its hardware monitoring...... can anyone help me sort this out?
    My system specs are
    MSI H81M-E33 motherboard - BIOS version V6.4B3
    Intel I5-4590 CPU

    Try this one 0.69 Beta 2:
    https://dl.dropboxusercontent.com/u/40094917/Command%20Center%201.0.0.69beta2.zip
    before install it, deinstall the old one, then manually delete Command Center folder.
    Then install the new one 0.69 Beta 2
    after install and run it, when the loading error issue hapends,
    go to local disk C in MSI folder, ie: C:\MSI
    then locate a file named “MSILoading” and send it back. [upload it somewhere and give a link to it]
    How to use forum features: https://forum-en.msi.com/index.php?topic=90789.0
    Quote
    Also, note that Avast and Command Center had been living together just fine for a couple weeks, right up until yesterday..... weird huh?
    let us know if the  "msiwmiservice.exe" service is still detected by Avast!
    in latest Command Center version, if yes provide a screenshot with the issue

  • Master detail against Oracle Lite was working, now broken -help?

    I have a master detail form running against an Oracle Lite database which was working fine. Today I made several changes - added create method so I could default some values, changed background colors, connected to the rest of the columns in the child entity, changed some display formats.
    Now whenever I try to update or insert on the child table I get errors:
    DAC-305: DbAccess commitTransaction failed. Session: Session1
    JBO-26041: Failed to post data to database during "Insert": SQL Statement " INSERT INTO CBC(DAY,HORSE_ID,WBC,HGB,HCT,PLT,MCHC,PMN,STAB,BASO,LYMPH,MONO,EOS,FECAL,MY,ALBUMIN,BL) VALUES (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?) ".
    Unhandled object
    on insert, or
    DAC-104: ImmediateAccess: setAttribute failed. ColumnView: Hct row: 1
    JBO-26080: Error while selecting entity for Cbc
    [ODBC S1C00] driver not capable of this operation
    on update.
    I've undone most of what I did today trying to figure out what broke it. Wish I had a backup! What gives? How do I debug this thing?
    Thanks, Bryan

    Solution:
    For Oracle Lite anyhow, you must be careful to use the right data types in the BC4J EO (Entity Objects). Timestamp works, Date doesn't. BigDecimal works, number doesn't. If the wrong data type is set the application will read and display data, but attempts to insert new data or update existing data will throw the errors above.

  • Windows 7 crashed after Creative Suite 6 Design and Web Premium completed an update. The only Windows restore point that worked was pre-installation of CS6 software. Now when trying to reinstall I get the 'installer failed to initialize' message. Have tri

    Windows 7 crashed after Creative Suite 6 Design and Web Premium completed an update. The only Windows restore point that worked was pre-installation of CS6 software. Now when trying to reinstall I get the 'installer failed to initialize' message. Have tried using the CC Cleaner Tool but nothing works? Any solution please. Was new computer and newly purchased CS6 software downloaded 2 days prior to the upgrade.

    make sure you follow all the steps here, Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

  • TS1702 I own an iPad (latest/64 GB/WiFi+3G) that has iOS 6.1.3 . The TED Talks app that was OK till recently now crashes each time it opens. I think this is after a recent update. I removed it from my iPad & re-installed it but its no use. Can anyone help

    I own an iPad (latest/64 GB/WiFi+3G) that has iOS 6.1.3 . The TED Talks app that was OK till recently now crashes each time it opens. I think this is after a recent update. I removed it from my iPad & re-installed it but its no use. Can anyone help?

    A good read. Have you done anything at all to resolve your problem. Reset? Restore?
    By the way - "your products"... nobody here produced the iPhone, we are all just users. Apple is not here.

  • HT201412 I no longer have the computer my ipod touch was sinked too, my ipod has now crashed, when conected to my latest pc it states this computer is not the supervisor pc for this device, can anyone help

    I no longer have the computer my ipod touch was sinked too, my ipod has now crashed, when conected to my latest pc it states this computer is not the supervisor pc for this device, can anyone help

    iOS: Unable to update or restore
    Read the article  Put it in recovery mode

  • Adobe Fireworks cs6 is not opening .Saying internal eror occured  help me please

    Adobe Fireworks cs6 is not opening .Saying internal eror occured  help me please :

    For me the Fireworks stopped when it got to "Intializing Tab Windows", then a crashed and  displayed "Could not complete your request. an error occurred" and would never load. Basically dead. I couldn't use it at all. My whole workfow came to a stand still.
    BACKGROUND
    Just before this happened, I was trying a new feature from within Dreamweaver. While inside Dreamweaver, I could double-click an image file and it opened in my Fireworks to be edited. I thought . . . Wow, this is really cool. I edited that image and closed it and continued on my work. Since then, that "Connection" between applications has become permanent. Fireworks "THINKS" it is still connected to Dreamweaver. Later Fireworks would NOT open/load at. I would always get the above error.
    PARTIAL SOLUTION
    BTW: I had to do this twice, because the first time, I missed a file somewhere.
    I had to completely uninstall all ADOBE applications. I mean everything! I had CS3 & CS4 and Adobe Readers on my system.
    Since I'm on the mac, I went through the "Application Support" both user and system and the "Preferences" for both user and system and deleted everything that had either "adobe" or "macromedia" in it. There was also a file in the "Launch Agent & Daemons".
    I emptied the trash and did a power off restart. Then I reinstalled CS6. Now Fireworks at least loads and I can use it again, but it still isn't the same.
    OBSERVATION
    Fireworks and Dreamweaver are still "Connected". It won't save an existing PNG file as itself, it displays an error, "That file is open in another application", which is NOT true. I have to use the "Save As" option, and use the Finder to rename that file. I also notice an extra file labeled ex:0000056 which looks like the file I tried to save.
    So at least I can use my Fireworks again although it is irritating. I don't know how to "CUT" the connection between applications. Uninstalling & reinstalling did NOT reset this, the only option left would be a backup, wipe and fresh install of my entire laptop. I just don't have time to do that right now. Hope that helps someone else.
    Arlene

  • Help! Upgrade Fireworks CS5 (from Creative Suite 5 Web Premium) to Fireworks CS6 not working!

    Today I bought and downloaded Fireworks CS6 from the Adobe webshop as an update for my Fireworks CS5 that was included in my Creative Suite 5 Web Premium-set.
    But during the installation of Fireworks CS6 the serial number of my Creative Suite 5 Web Premium - needed for the installer to verify that I could 'legaly' upgrade - was not accepted! So now I can use Fireworks CS6 only as a try-out-version...
    What can I do? If Creative Suite 5 Web Premium isn't the right upgrade-version: how can I get my money back? Or is there another solution?
    Please help Adobe!
    And thanks in advance,

    Thanks for the reply. but how do I manually weed out the install entries in my registry? could you please guide me with the steps? This http://www.adobe.com/support/contact/cscleanertool.html is not working I am afraid. I understand that I need to uninstall the creative suite before I run CS cleaner. But as I explained in my first question, the uninstallation is not working at all. Even I could uninstall the software, I am afraid that I may get into trouble if installatin is not working. All I want is that my photoshop error " save for web devices " which was grayed out should work as normal. This error happened after I moved the plug-ins.
    Thanks
    Uthan

  • Fireworks CS6 export all pages as PDF crash

    I cannot for the life of me Export all pages as pdf from FW CS6 on my Mac. All software is fully up-to-date. I have many times Exported scucessfully before, but now the same file is no longer exportable. I'm going crazy. The source PNG file is a 15 MB file of 68 pages, it is filled with hotspots that should export an interactive PDF. (I deleted all of the "unused library symbols" (even though that deletes symbols that are actually in use)). My Mac is a PowerMac 8GB RAM... I can't remeber the processor setup... I can tell you later when I'm at work...
    I have been using FW since late 90s. FW crashes a dozen or more times a day these days. I'm tired of fighting it. Adobe has frankly been woeful in updating FW (on the Mac at least). It is an excellent product... but at best an unfinished product. I've sent bug reports through official channels for years and every year Adobe fails to fix them. It is quite shocking really.
    I hope I can get a quick answer, or else my job will become much more difficult.

    Here's a partial Crash output, let me know if more would help:
    Process:         Adobe Fireworks CS6 [5239]
    Path:            /Applications/Adobe Fireworks CS6/Adobe Fireworks CS6.app/Contents/MacOS/Adobe Fireworks CS6
    Identifier:      com.macromedia.fireworks
    Version:         Adobe Fireworks CS6 version 12.0.0.236 (12.0.0)
    Code Type:       X86 (Native)
    Parent Process:  launchd [163]
    User ID:         502
    Date/Time:       2013-02-05 17:33:03.564 -0500
    OS Version:      Mac OS X 10.8.2 (12C60)
    Report Version:  10
    Interval Since Last Report:          95268 sec
    Crashes Since Last Report:           72
    Per-App Interval Since Last Report:  84851 sec
    Per-App Crashes Since Last Report:   17
    Anonymous UUID:                      EDC2114F-8AD4-DC55-0A2A-EC60302FB1F0
    Crashed Thread:  0  Dispatch queue: com.apple.main-thread
    Exception Type:  EXC_CRASH (SIGABRT)
    Exception Codes: 0x0000000000000000, 0x0000000000000000
    Application Specific Information:
    abort() called
    Thread 0 Crashed:: Dispatch queue: com.apple.main-thread
    0   libsystem_kernel.dylib                  0x9856fa6a __pthread_kill + 10
    1   libsystem_c.dylib                       0x935caacf pthread_kill + 101

  • I am working on a PC.  My InDesign CS6 was working but is now missing its amtlib.dll file.  To fix it it says to reinstall program but I was am idiot and didn't make a copy.  Is there any way to reinstall this missing file?

    I am working on a PC.  My InDesign CS6 was working but is now missing its amtlib.dll file.  To fix it it says to reinstall program but I was am idiot and didn't make a copy.  Is there any way to reinstall this missing file?

    It was bought for my son and he never registered it. 
    I still don't understand why Neema was trying to reinstall it when she didn't have the serial number but after she uninstalled it, said she couldn't reinstall it because I didn't have the serial number.  I never had it yet she didn't have a problem with trying to install it originally.
    Still won't buy another Adobe product again.  I've talked to a lot of people who can't stand Adobe and I now know why.  I can't even update Flash without my whole system crashing or getting a virus.
    I won't re-purchase InDesign either.  I realize it should have been registered and I explained that my email had been hacked and my proof of purchase was deleted with ALL of my emails and I also had a major virus after updating Flash.
    I can't afford to buy the same product twice.
    I will find out what other formats my book distributor (Ingram Books) accepts and purchase that program.
    Not impressed with Adobe and will share my experience with others so they can be sure to register their product and make a copy of the program BEFORE allowing an Adobe employee to take control of their computers.
    If you knew the answer to my question, customer support should have too.
    Thanks for your help.
    Denise

  • I just bought a new macbook pro and my CS6 migrated, but now when I open existing documents, it launches a free trial version. There doesn't appear to be a way to enter my serial number or communicate that I simply have a new computer. HELP! There is no c

    I just bought a new macbook pro and my CS6 migrated, but now when I open existing documents, it launches a free trial version. There doesn't appear to be a way to enter my serial number or communicate that I simply have a new computer. HELP! There is no customer support for this. I can't believe what a poor service company Adobe is!!

    The problem was that you migrated CS6. Unfortunately, migration doesn't work because it doesn't move all the files.
    First, you'll need to use the Adobe Cleaner Tool to remove the components that were installed:
    Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
    Second, you should install a clean copy of CS6. Here is a link:
    Other downloads

  • Fireworks CS6 crash when opening color palette

    Fireworks CS6 has got to be the buggiest program I have used on my Mac.
    The bug that is especially irritating is when I attempt to open a Color Palette, Fireworks immediately crashes ( this is before I even begin to navigate or select a color palette ).
    I have been able to narrow this problem down to a Fireworks CS6 problem on my Mac as opposed to as simple program like TextEdit. I can open the color palette in TextEdit which adds it to the OS color palette library. From there I can use colors from the newly opened palette within Fireworks. It (FW) just can't do the opening of the palette.
    Is anyone else able to open/add the color directly from FW CS6?
    MacBook Retina -16Gb RAM
    Mac OS 10.8.3

    I have the exact same problem, also running OS X Machericks 10.9.5 on a Mac Book Pro, would be really helpful to understand how to fix this error.

  • Today's daily Fireworks CS6 crash

    <rant>
    It was a good day... I only lost 30-45 min of work this time, and sadly, the Fireworks auto-panic-save produced garbage.
    Im a creative cloud subscriber, and I rely on Fireweworks daily to earn a living.  But I'm about at the end of my rope with this product.
    Photoshop is not an alternative for the type of work I do,  yet I feel that is where Adobe is trying to lead us.  Fireworks CS6++ needs a re-write, simply bolting un-needed new features to this 32-bit Frankenstein wont cut it.
    Same behavior from two different Mac-Pro's (home / office), running two different versions of OSX (10.7x / 10.8x).
    </rant>

    I have given Sketch a shot, and I feel like it's just as buggy, if not more buggy, than Fireworks.
    BigMucho,
    I too rely on Fireworks every day for work and too experience the daily crashes.  It really is a shame that the only product designed to for interactive work is filled with so many issues.
    The only thing I can recommend (and i highly recommend you do) is enable autosave.  I have mine set for 5 minute increments, so at most I lose 5 minutes worth of work.  Just make sure you save the document before you start working on it, so there is an file to be autosaved.
    It's really pathetic that I have to use such a hack of a fix just to make Fireworks functional.  Hopefully either Adobe gets its act straight with Fireworks, or another product (like Sketch) comes along as a proper replacement. 

Maybe you are looking for