Fireworks document has layers in Dreamweaver

When I insert my Fireworks HTML it is creating a separate
layer in Dreamweaver that floats above the other layers. This
didn't happen the first time I inserted this graphic. What could I
have changed to cause this to happen?

hforeman wrote:
> When I insert my Fireworks HTML it is creating a
separate layer in Dreamweaver
> that floats above the other layers. This didn't happen
the first time I
> inserted this graphic. What could I have changed to
cause this to happen?
What steps are you going through to insert it?
Linda Rathgeber [PVII] *Adobe Community Expert-Fireworks*
http://www.projectseven.com
Fireworks Newsgroup:
news://forums.projectseven.com/fireworks/
CSS Newsgroup: news://forums.projectseven.com/css/
http://www.adobe.com/communities/experts/

Similar Messages

Help inserting Fireworks pop-up menu into Dreamweaver

I wonder if anyone can help me with pop-up menu insertion
process. I create the menu in Fireworks and export it to
Dreamweaver. I place the menu in a fresh test document and it works
perfectly every time, but when I go through the exact same series
of steps in my real page, I get a broken image icon. I just can't
understand why the path is fine one way, yet gets lost in the
shuffle the other way. The only two differences I can think of are
where in the site folder the test page is saved, as opposed to
where the real (archive) page is stored, and the fact that the
archive page already has rows and columns and cells, where the
fresh test page has just one basic table and nothing else at all. I
even tried manipulating the code directly to make the sections in
question identical, and even that doesn't do it. As far as I could
see, my actual working site page (which won't accept the insertion)
had one extra bit of code, namely
<td colspan="4"
Everything else seems to be the same.
I am losing my sanity over this!

Would it be too late to direct you to another menu approach
altogether? The
FW pop-up menus are not the sharpest knife in the drawer -
Check the uberlink and MacFly tutorials at PVII
http://www.projectseven.com/)
and the Navbar tutorial/articles at Thierry's place
http://tjkdesign.com/navbars/)
Or to get it done fast, go here -
http://www.projectseven.com/tutorials/navigation/auto_hide/index.htm
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"birdpics" <[email protected]> wrote in
message
news:ed2pnn$5cl$[email protected]..
> I wonder if anyone can help me with pop-up menu
insertion process. I
> create
> the menu in Fireworks and export it to Dreamweaver. I
place the menu in a
> fresh
> test document and it works perfectly every time, but
when I go through the
> exact same series of steps in my real page, I get a
broken image icon. I
> just
> can't understand why the path is fine one way, yet gets
lost in the
> shuffle the
> other way. The only two differences I can think of are
where in the site
> folder the test page is saved, as opposed to where the
real (archive) page
> is
> stored, and the fact that the archive page already has
rows and columns
> and
> cells, where the fresh test page has just one basic
table and nothing else
> at
> all. I even tried manipulating the code directly to make
the sections in
> question identical, and even that doesn't do it. As far
as I could see, my
> actual working site page (which won't accept the
insertion) had one extra
> bit
> of code, namely
>
> <td colspan="4"
>
> Everything else seems to be the same.
>
> I am losing my sanity over this!
>
>
>
>
>

Delivery Document has been created - showing the status of Being Processed.

Hi All.
I am facing the following typical problem.
1. Sales order has been created - showing the status of COMPLETED.
2. Delivery Document has been created - showing the status of Being Processed.
3. Goods Issue document created successfully- showing status as COMPLETE
4. Billing Document has created successfully - showing the status as COMPLETED.
5. Customer Account got updated properly.
Query: Despite of completion of SO, DELIVERY, GOODS ISSUED, AND BILLING DOCUMENT u2013 and accounting document is cleared why the outbound Delivery document status is showing as BEING PROCESSED.
If I go T-code Vlo3n see document flow
Delivery 5080789885 being processed.
Go to VF03 document flow also it is showing
Delivery 5080789885 being processed.
Aditya

Hi ALL,
Further to my query I would like to clarify the following:
It is happening since 2004 all Bom components status (Delivery being processed) all the BOM main items header status is showing completed.
It not impacting the business, but suddenly user raise query SO, DELIVERY, GOODS ISSUED, AND BILLING DOCUMENT completed why still delivery showing as being processed.
1. I have checked at SO level -- all the line items were delivered. ie: delivery, goods issue, billing completed.
2. I checked the Header Level data completed and Item Level data being processed.
3. If I look into the each item level also it is showing as being processed.
4. Even the SALES ORDER HEADER LEVEL showing the status of Completed.
5. Removed credit check in delivery.
The only issue is OUTBOUND DELIVERY DOCUMENT: Status alone it is showing as ' Being Processed' -- surprisingly!
Aditya.

When I try to open any kind of links, the page first shows me "the document has moved" and then goes on to some advertisement page.

When I follow any kind of links or try to open something in another window or new tab, the browser first shows the white page with text "the document has moved", and then moves to advertisement page of some sort. Usually in the small box where the page description is it says "Jump". I don't know how to disable it, it is really irritating.

Sounds like Malware.
Install, update, and run these programs in this order. '''''(Not all programs detect the same Malware.)''''' They are all free for personal use, but some have limited functionality in the "free mode" - but those are features you really don't need to find and remove the problem that you have. 
''Note: If your Malware infection is bad enough and you are mis-directed to URL's other than what is posted, you may have to use a different PC to download these programs and use a USB stick to transfer them to the afflicted PC.''
Malwarebytes' Anti-Malware - [http://www.malwarebytes.org/mbam.php] 
SuperAntispyware - [http://www.superantispyware.com/] 
AdAware - [http://www.lavasoftusa.com/software/adaware/] 
Spybot Search & Destroy - [http://www.safer-networking.org/en/index.html] 
Windows Defender: Home Page - [http://www.microsoft.com/windows/products/winfamily/defender/default.mspx]
If these don't find it or can't clear it, post in one of these forums for specialized malware removal help: 
[http://www.spywarewarrior.com/index.php] 
[http://forum.aumha.org/] 
[http://www.spywareinfoforum.com/] 
[http://bleepingcomputer.com]

How do I change the color of font in a fillable form in Adobe Reader? How can I check if the writer of the document has given permission to edit color and not just add text?

How do I change the color of font in a fillable form in Adobe Reader? How can I check if the writer of the document has given permission to edit color and not just add text? Please help! I'm technologically challenged.

Most forms (99% or more) are created for simple text input, where you cannot change anything.
The creator of the form could allow Rich Text input (which allows you to change font, text size, color, etc.), but frankly I have never seen such a form, and I wouldn't know how they look. But I'm sure they would show some kind of controls to alter the text appearance.

Wrongly cleared document has been reversed &resetted

Hi Gurus,
could anybody help us to resolve below issue.
wrongly cleared document has been reversed and restted via FBRA ,so we are trying to reverse this doc via FBRA so we are getting below error message while doing
Resetting this reverse document is not possible
Message no. F5579
Diagnosis
The system required a reverse document to be created after resetting a clearing procedure as otherwise documents would have been generated in the system which could not have been processed correctly. The following cases require the clearing document to be reversed:
Exchange rate differences were posted.
Your intime solution is highly appreciated
Thanks & Regards
Vyshnava

Hi Syed,
Thanks for your reply ,
original postings happened as below :---
001 40       187720     CTB1 CTB01                                        16.08
002 50       187722     CTB1 CTB01 -I/F Chq                               15.58-
003 50       800802     Realized FX gain                                   0.50-
the above doc is reversed Via FB08 as below :-------
001 50       187720     CTB1 CTB01                                        16.08-
002 40       187722     CTB1 CTB01 -I/F Chq                               15.58
003 40       800802     Realized FX gain                                   0.50
Could you pls reply ASAP

With my taking any action, my folders and files no longer appear under documents (under Places). Now a folder titled Documents has appeared on my desktop with all my files and folders. What happened?What happened?

With my taking any action, my folders and files no longer appear under documents (under Places). Now a folder titled Documents has appeared on my desktop with all my files and folders. What happened?What happened?

The way I moved from 10.3.9 to 10.5.8 was to use "ditto -rsrc" and copy the user homes and the data share to an external firewire drive. Then did the same in reverse.
I found the key to data and share permissions to make sure that the users had the same UID in Leopard that they had in Panther.
You can then use "sudo rm -rf" to remove any folder from the relocated homes that you want. Remember if you do choose to remove "~/Library" from each users relocated home, you will be removing any iCal calendars, login.keychains, browser bookmarks, custom screensavers and wallpapers, etc.
Users don't really care if they can login and do any work. But there will be much wailing, gnashing of the teeth, and anxiety, if they lose their bookmarks and wallpaper.

I have a word document that I have put hyperlinks in and turned into a pdf. When I email and receiver opens in iPad the document is blank. When I do a file save as pdf the document appears and the hyperlinks work but the document has much of the content

I have a word document that I have put hyperlinks in and turned into a pdf. When I email and receiver opens in iPad the document is blank. When I do a file save as pdf the document appears and the hyperlinks work but the document has much of the content turned into symbols. What is going wrong?

You select the printer properties and set the appropriate page size (I think there is a place to set it in PDF Maker too, but not sure). In the printer, this is equivalent to putting the proper paper in the printer.

While clearing document has more than 999 line items system not allowing

Hi,
We have an issue with FI-Customer Clearing. While clearing the error is appearing as document has more than 999 line items. after the detailed checking we found that there are lots of line items posted to Real Exchange Rate diff that to COPA.
To reduce the maximum line items SAP is suggesting to deactivate the Real exchange rate diff.postings to COPA.
Regards,
R.Kumar.

Hi,
Please check SAP Note 1353125
Thanks

The accounting document has not yet been created

Dear All,
Account document has not created after Billing document creation.
Unable to clear this billing document with payment. What could be the reason?
Expecting valuable guidelines.
Regards,
GB

Hi,
I hv tried thro' VF02 - Release to Accounting and the following error msg is showing :
Posting date / period 07.10.2009/007 is earlier than existing date / period 14.10.2009/007.
What is this existing date / period date. How do I will check thro' Sale Order.
Expecting few more guidelines!!
Regards,
GB

This document enabled extended features in Adobe Reader. The document has been changed...

I am trying to distribute an interactive order form to approx. 50 recipients with Acrobat X Standard which I purchased recently. Computer is Windows 7.
I can go through the form editing and distribution as usual, but when I (or a recipient) opens up the distributed form with Adobe Reader, they get the message: “This document enabled extended features in Adobe Reader. The document has been changed and use of extended features is no longer available. Please contact the author for the original version of this document.”
Oddly enough, sometimes is does work, but 90% of the time it doesn’t.
And I have another, older XP computer with Acrobat X installed, and it works fine 100% of the time – weird....can anyone help?

Hi Ken
We have so many people who have not updated they are trying on 9. I might just have to tell them we can’t support under reader 10.
Thanks
Tania
Never tell people how to do things. Tell them what to do and they will surprise you with their ingenuity. -General George S. Patton
Tania Lindenmayer \ Manager Organisational Shared Services \ Jabiru Community Youth & Children’s Services Assoc (Inc) \ Ph: (07) 3269 0044 Fax: (07) 3869 0675 \ [email protected]<mailto:[email protected]> \

My document has disappeared despite me saving it.

My document has disappeared. Saved it yet cannot find it anywhere. Help!

Well, you've told us next to nothing (e.g., what application you were running, what version of OS X you are running, whether you closed the app when you saved the document, etc.).
With this very limited information, I would suggest trying Spotlight (magnifying glass in upper right corner of screen). Type in the name of the document and see what turns up.

How to get the times a document has been opened

Does somebody know if exists any kind of property attached to documents that can tell who many times a document has been opened? Or there is a way to know this in a different way?
Thank you in advanced.

Hi Pablo,
To obtain such statistical information wecan implement KM apis.. in the sense create repository services That can count the actual number of times a document is accessed
see this link for repository services
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/documents/a1-8-4/how to develop with the repository framework apis.pdf
Also refer to the following forum Looking for way to count a specific document hits(Not with Activity Report) for further assistance.
Hope this helps,
Regards,
Uma.

When I single finger click on my iMac Trackpad, on a .pdf document, (happens in a webpage only) Quicktime app. always opens the document and not Adobe or Preview! If a document has severaI Quicktime opens one page only. Can anyone assist?

When I single finger click on my iMac Trackpad, on a .pdf document, (happens in a webpage only) Quicktime app. always opens the document and not Adobe or Preview! If a document has severaI pages Quicktime will only show one page. So, not very useful!!
Can anyone assist?

More threads: https://support.mozilla.org/en-US/search?q=fbi&asked_by=&answered_by=&w=2&a=1&sortby=1&esab=a

On Pages 09. Error Message "Missing Font" - text on all my files/Documents has disappeared. I know it is still there from the word count - but it is invisible. Any clues Gratefully received.

On Pages 09. Error Message "Missing Font" - text on all my files/Documents has disappeared. I know it is still there from the word count - but it is invisible. Any clues Gratefully received.

What version of Pages '09?
Have you updated it to the latest iWork '09 v4.3?
Peter

Fireworks document has layers in Dreamweaver

Similar Messages

Maybe you are looking for