Fireworks frozen after sleep Mac OSX 10.6

Whenever I return to Fireworks after the computer has been asleep, fireworks is busy doing something for between 5 and 15 mins before I can use it. I can force quit but sometimes I have unsaved changed or I'm unsure if there's anything I don't want to lose by forcing it to quit just so I can start working again.
Activity Monitor show fireworks alone is using between 99 and 103% of CPU usage.
I don't have a slow machine, it's 2.66Ghz i7, with 8gb or RAM and and 250gb SSD.
This is the only CS5 app that seems to do this for me or it's just that I use afireworks a lot and don't notice the others. But it's gotten very frustrating as I've been able to search, then write this message on the forum while waiting and it's still not operable.
Anyone have any ideas other than the most obvious?
Thanks much.

It's missing background frameworks:
Library not loaded:/library/frameworks/ilifepagelayout.framework/versions/a/ilifePageLayout
To re-install iPhoto
1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
2a: On 10.5: Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
2b: On 10.6: Those receipts may be found as follows: In the Finder use the Go menu and select Go To Folder. In the resulting window type
/var/db/receipts/
2c: on 10.7 they're at
/private/var/db/receipts
A Finder Window will open at that location and you can remove the iPhoto pkg files.
3. Re-install.
If you purchased an iLife Disk, then iPhoto is on it.
If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
If you purchased it on the App Store or have a Recent Mac you can find it in your Purchases List.

Similar Messages

HT1893 After installing Mac OSX Snow Leopart 10.6.3 my HP Photosmart C5500 won't scan to computer. The printer is working. What do I have to do to be able to scan again?

After installing Mac OSX Snow Leopart 10.6.3 my HP Photosmart C5500 won't scan to computer. The printer is working. What do I have to do to be able to scan again?

Often, you have to download updated vendor software drivers when you switch operating systems. HP doesn't list a C5500 on their web site, however, here's the link to the OS X 10.6 C5540 software. If you have one of the other C55xx models, look for the updated driver/scan software on their software/driver download section of HP.Com.

Photoshop CS5 - colour settings in Print menu not working after update Mac OSX maverick

After upgrading to Maverick OSX on the iMac printing from CS5 via Epson R3880 is not working correctly. In Print Settings menu the drop downs for Colour and Colour Settings are greyed out. I already re-installed PS and installed the new drivers from epson. Any ideas?

but after choosing PS manages color, the options in the print menu for choosing color (color or b&W) and color settings are not available anymore. They used to be the last three years I printed with photoshop/epson 3880.
Instead they are greyed out now.
attached screenshot:
Op 30 mei 2014, om 01:47 heeft Chris Cox <[email protected]> het volgende geschreven:
Photoshop CS5 - colour settings in Print menu not working after update Mac OSX maverick
created by Chris Cox in Photoshop General Discussion - View the full discussion
If Photoshop managed color, then the controls in the printer driver are supposed to be grayed out - that's how Apple specifies drivers to work (because only one party should be managing the print color).
So what you're describing is perfectly normal.
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6420209#6420209
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Photoshop General Discussion by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Kernel Panic Error after last MAC OSX update

Hi all,
My first post here.
Last week, after install the last update of MAC OSX on my intel IMac (last of 2009), when the computer was restarting, a kernel error screen appears...
I've launched the safe mode, and the computer starts fine and I've execute the disk utility to repair HDD and rights. I've done the same initializing from the installation DVD, but the kernel error appears again...
I leave only the usb apple keyboard plugged, and I don't understand why this error still happening, and of course why it occurs after a MAC OSX standard update (no new hardware or software installed in the las month).
I'm little desperate with this issue
kernel error.
Many thanks in advance!
Best regards
Hugo
PS: This is the Kernel error report:
Kernel Error
panic(cpu 0 caller 0x2abf6a): Kernel trap at 0x0029f24f, type 14=page fault, registers:\
CR0: 0x8001003b, CR2: 0x01489000, CR3: 0x00100000, CR4: 0x00000668\
EAX: 0x00872c8c, EBX: 0xec835357, ECX: 0x5d27b1e9, EDX: 0x01488ffd\
CR2: 0x01489000, EBP: 0x5130bd18, ESI: 0x00000000, EDI: 0xec835357\
EFL: 0x00010202, EIP: 0x0029f24f, CS: 0x00000008, DS: 0x00000010\
Error code: 0x00000002\
Backtrace (CPU 0), Frame : Return Address (4 potential args on stack)\
0x5130bb18 : 0x21b837 (0x5dd7fc 0x5130bb4c 0x223ce1 0x0) \
0x5130bb68 : 0x2abf6a (0x59e3d0 0x29f24f 0xe 0x59e59a) \
0x5130bc48 : 0x2a1a78 (0x5130bc60 0x0 0x5130bd18 0x29f24f) \
0x5130bc58 : 0x29f24f (0xe 0x20520048 0x51300010 0x2a0010) \
0x5130bd18 : 0x57b5748f (0x5d27b1e9 0xec835357 0x5d27b1e9 0xec835357) \
0x5130bd58 : 0x57b59ef9 (0x588ffd 0x575d27b6 0x57b5eab0 0x53c996) \
0x5130be18 : 0x543f60 (0x7534e00 0x6e08f00 0x1 0x506b76) \
0x5130be78 : 0x542137 (0x6e08f00 0x7534e00 0x5e5209 0x1) \
0x5130bf28 : 0x5426e9 (0x6e08f00 0x752ed80 0x0 0x516766) \
0x5130bf78 : 0x5443d5 (0x6e08f00 0x0 0x5130bfac 0x1) \
0x5130bfc8 : 0x2a179c (0x74ff040 0x0 0x2a17ab 0x7313b7c) \
Kernel Extensions in backtrace (with dependencies):\
com.metakine.handsoff.driver(1.2.4)@0x57b54000->0x57b62fff\
BSD process name corresponding to current thread: kernel_task\
Mac OS version:\
Not yet set\
Kernel version:\
Darwin Kernel Version 10.8.0: Tue Jun 7 16:33:36 PDT 2011; root:xnu-1504.15.3~1/RELEASE_I386\Ker

Hi Hugo, & a warm welcome to the forums!
One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for problem in Safe Mode...
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
Reboot, test again.
If it only does it in Regular Boot, then it could be some hardware problem like Video card, (Quartz is turned off in Safe Mode), or Airport in 10.4 & below, or 3rd party add-on, Check System Preferences>Accounts>Login Items window to see if it or something relevant is listed.
Check the System Preferences>Other Row, for 3rd party Pref Panes.
Also look in these if they exist, some are invisible...
/private/var/run/StartupItems
/Library/StartupItems
/System/Library/StartupItems
/System/Library/LaunchDaemons
/Library/LaunchDaemons
It does look like the com.metakine.handsoff.driver, whatever that's about.

Help for OSX Server 3.2.2 could not open after upgarded Mac OSX Yosemite!

Dear All,
Please for solving my osx server 3.2.2 could not open and show failure after upgarded Mac OSX Yosemite.

Version 3.2.2 does not work with Yosemite you'll need to upgrade to version 4.0 to get Server functionality.
Cheers HD

Reconnect Magic Mouse/keyboard after reinstalling Mac OSX

After about a week I finally managed to reinstall Mac OSX Snow Leopard...I took a RAM stick out at random and it worked...good thing there weren't any Genius bar appointments which suited me.
Anyway, now I need to connect a keyboard
I've already got my USB keyboard in it (The same size one as the wireless one...but this one's wired)
I've unplugged it, plugged it back in. I've dug out my wireless keyboard and nothing's happened (Yes, the green light blinks...)
I put my iMac to sleep, I turned it off, it still isn't working...
I could try and find a wired mouse/keyboard somewhere...but I can't believe my wired Apple keyboard isn't working with it ^_^
I'm surprised Apple think this wireless stuff is a good thing...I'm more surprised my wired keyboard won't connect...
It's an iMac 11,2 (I think - Whatever the late 2010 one was) and I'm running Snow Leopard.
Also - When's it safe to put the RAM back in? Or is it actually faulty and I need to get a replacement? How can I check?

Just to clarify, this is what I want/hope to do:
Backup my iMac using Time Machine (Complete)
Format the iMac to factory settings (Complete)
Reinstall Snow Leopard (Incomplete)
Restore some files and folders (Incomplete)
Maybe upgrade to Lion...if I'm in a good mood.
I'm mainly doing this because my hard drive stopped last week, and the hard drive fan sped up. I had to restart, went into safe mode and...I don't actually know what you're supposed to do in safe mode so I restart normally. The next day, I turned my iMac on and it had that bar below the logo as if it was booting in safe mode, the bar appeared to have stopped, so I turned the iMac off, and upon turning it back on, the bar was back, so I decided to leave it and it started fine. The next day, once again, the bar was there so I left it, but once it got to the desktop, Finder wouldn't load, I tried relaunching Finder a few times, then restarted the computer, if I remember correctly, it restarted and Finder wouldn't load again. I tried again, this time it wouldn't boot at all, I Googled it a bit and tried resetting the PRAM, SMC etc., then found that you can read what's happening when it's booting to safe mode, and many errors came up saying that some numbers were incorrect, after a few minutes, it said "Halting CPU" or something, and that's when it turned off. I then booted from the disc, and restored using the Time Machine backup. I wasn't pleased with the backup; some applications failed to load properly. I thought I might as well restore it and just copy a few files across, to save space and speed up the computer.
The many times I tried reinstalling Snow Leopard, it didn't work. I tried many things, and last night I decided to make a disc image or something to a USB stick. I don't think it was an image, because the tutorial I followed which worked didn't require that you create an image. After trying to install from the USB stick, it failed, I then removed a RAM stick, it finally worked! But my keyboard wouldn't connect...that's when I came to creatin this post, and I tried reinstalling again, it failed to reinstall, I tried removing the other RAM stick, still failed.
Last week wasn't the first time my hard drive suddenly stopped, it's happened a few times before, but the hard drive fan hasn't sped up upon the hard drive stopping, and it's also managed to start again and the computer to continue working a few seconds later. Maybe it is about time I take it to Apple...but my warranty's ran out so I'm not sure if they'll help me.

Waking after sleep Mac Book Air

Hi. I have posted this question before and was kindly informed by a member that the problem of waking after sleep might disappear after updating to OSX 10.9.4. It hasn't helped. Are there any suggestions. This is happening repeatedly now and I see from one member who reset theta the problem returned. My 11 inch Mac Book Air is only six or seven months old. This started happening occasionally within three months of purchase. Any suggestions?
Thanks for any help.

Step 1
Take all the applicable steps in this support article. That's the starting point for any further efforts to solve the problem. Please read the whole article carefully (some of it is hidden by disclosure triangles) and don't skip any of the steps, including the ones under the heading "Additional troubleshooting." If you don't understand any of the steps, ask for guidance.
Step 2
If you're running OS X 10.8.5 or earlier, from the menu bar select
           ▹ System Preferences... ▹ Accessibility
If the checkbox at the bottom marked
          Enable access for assistive devices
is checked, uncheck it and test.
If you're running OS X 10.9 or later, select
           ▹ System Preferences... ▹ Security & Privacy ▹ Privacy ▹ Accessibility
If any applications are listed on the right and have a checked box next to them, uncheck all the boxes and test. You may first have to click the padlock icon in the lower left corner of the window and authenticate as an administrator to unlock the settings.
Step 3
This step must be taken as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
In the Console window, look under the heading DIAGNOSTIC AND USAGE INFORMATION on the left for Diagnostic and Usage Messages. If you don't see that heading, select
          View ▹ Show Log List
from the menu bar. In the search box in the window's toolbar, enter "powerd" (without the quotes.)
You may see one or more lines like this:
com.apple.message.signature: Platform Failure
If you do see that, and you did everything in Step 1, then you're dealing with an internal hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

Javascript (in Firefox 3) takes several minutes to start working when computer wakes from sleep, Mac OSX 10.5.8

Whenever I wake my Mac from sleep, with Firefox having been left running, some parts of Firefox take several minutes to start working again. These include switching between open tabs and any website functionality that uses javascript, eg gmail. This has gone on through many updates of Firefox. If I quit Firefox immediately on waking the Mac and restart it, everything is OK.

The following worked for me:
http://support.mozilla.com/en-US/questions/684867
"Problem: I had the same problem but with mac osx 10.5.8, Firefox 3.6.6 sometimes prints and sometimes does not, but the preview was always blank and I could not save to pdf file.
Solution: I downloaded Firefox 3.5.10, installed it on my desktop and opened it, tried print preview and it worked, quit Firefox 3.5.10 and ran 3.6.6 and voila! print preview is working fine and I can save to pdf fine.
I guess running 3.5.10 fixes the profile in a certain way. I have no idea how that happened but it worked."

Pre install apps are deleted after recovering mac osx lion

Hi all,
I am new to apple product, i just got my new MacBook Pro late 2011 about 2 months ago, and recently my laptop getting slow so i decided to use mac osx lion recovery, and yesterday i do it, i reninstalled as their was brief description about how to reinstall the refresh copy of macosx lion
now all the pre installed apps like iphoto, imovie, GrageBand, etc. are not in lauch pad, perhaps deleted, please some help me i want them back, how can get it back
thankyou!

Chohan.XXX wrote:
hey this only help me to get ilife pakage, but not others..........
What Others are you referring to...
Chohan.XXX wrote:
... and is my mac warrantty affected by this,...
Why would you think your warranty would be affected after using Lion Recovery...
Chohan.XXX wrote:
... is thier any different between the pre installed mac os x lion when i bought it and and now after using recovery
Click on the Apple Icon, top right of your Screen... Click on About this Mac
Which Mac OS X does it say you have...

Fan noise after downloading Mac OSX 10.4.6

After I downloaded Mac OSX 10.4.6 I noticed that my fans made a little noise and seem to be somewhat louder. This was not the case prior to me downlaoding the new version of Mac OSX. Has anyone else experienced this problem and what is the remedy?
Power Mac G5 (dual 1.8/aluminum tower) Mac OS X (10.4.6) Power Mac G5 (dual 1.8)

Some discussion that may be of interest here
http://discussions.apple.com/thread.jspa?messageID=2124185
and here
http://discussions.apple.com/thread.jspa?messageID=2100435

Is Fireworks MX2004 compatible with Mac OSX Tiger?

Hi all,
I guess the title really says everything...
I want to upgrade from OSX Panther to Tiger. Fireworks'
Technotes seem to say (as I understand them) that there were
originally some compatibility problems between MX2004 and Tiger but
these were fixed in a Fireworks update. Is this the case?
Thanks in advance for the help!

mpjx wrote:
> Can anyone help, please?
The only issue I've heard of relating to Fireworks MX 2004
and Mac OS
Tiger is with drawing tablet drivers. I wish I could be more
help. Why
not contact Adobe support?
Linda Rathgeber [PVII] *Adobe Community Expert-Fireworks*
http://www.projectseven.com
Fireworks Newsgroup:
news://forums.projectseven.com/fireworks/
CSS Newsgroup: news://forums.projectseven.com/css/

Kernel Panic after Sleep Mac OS X Lion

I'm getting this quite frequently now. When I put my MacBook Pro to sleep (bought in novemeber 2011, running OS X Lion 10.7.3) and turn it back on, it crashes after I log in in my account.
This is getting quite annoying, and I was wondering if there's something I could do to prevent it to give me a kernel panic after each wake up. I certainly don't want it to become more and more frequent. I don't have a Mac installation DVD so I wouldn't be able to reinstall OS X Lion.
Thanks
Tawfiq.

"Navigate to ~/Library/Preferences/ByHost/, delete any files that contain "windowserver," and reboot the machine. The procedure may need to be repeated if you regularly connect to an external monitor once it is also connected."
-ArsTechnica, other sources

Blue Screen & mouse frozen after sleep

Problem: After my G5 PowerPC tower wakes up from sleep, the mouse will not work. After approx. 1 minute, my screen goes blue and the computer is frozen.
This all seemed to start immediately after I did the most recently iPhone software and iTunes update--don't know if its just a coincidence or not, but that's when it started.
I've done the Disk Utility fix and then a Install & Archive from the Install disk (OS 10.5), Nothing. Its still doing this crash ONLY after the computer wakes up from sleep.
Does this mean I have to do a complete fresh reinstall of the OS and start from scratch???
H E L P ! ! ! ! ! !

I just bought the magic mouse and did the new update (Wireless Mouse Software Update 1.0) for it to work on my machine. I also updated my iTunes at the same time. Everything seemed to work fine until my computer went to sleep. I woke the computer and my desktop showed up just fine, then about 5 seconds later I got the blue screen.
The only thing I have been able to do is just do a hard reset. I repaired my disk permissions and the same problem continues.
I tried the advice above (create a new user account) but that did not work.
Any ideas...

After sleep, mac opens with white screen, have to manually reboot. what's the deal?

after 15 minutes, mac goes to sleep. when I go back to it I have white screen and have to manually reboot.

Hi georgenjr,
Welcome to the Apple Support Communities!
I know this article doesn’t list the exact issue you are experiencing but I would suggest the steps to troubleshoot.
Mac OS X: Gray screen appears during startup
http://support.apple.com/kb/ts2570
I hope this helps,
-Joe

17" MBP Frozen after Sleep

I have a 17" MBP 2.66GHZ I7 that is connected to an Apple Cinema display. Most nights when I allow the computer to go to sleep it wakes to a frozen but distorted log-in screen. I have to force shutdown via the power buttton and then power it back up. This happens when the lid is open - I leave it that way for purposes of keeping the MBP cool and the fans quiet at night. Any ideas what might be causing this to occur?

Try starting in the Safe Mode and see if you get the same results:
Starting Up in the Safe Mode
What is Safe Mode
Also try using another account to see if you get the same results. Disk Utility doesn't repair permissions for your user account. To do this,boot to your Recovery partition (holding down the Command and R keys while booting) and open Terminal from the Utilities menu. In Terminal, type: 'resetpassword' (without the 's) and select the admin user. You are not going to reset your password. Click on the icon for your Macs hard drive at the top. From the drop down below it select the user account which is having issues. At the bottom of the window, you'll see an area labeled Restore Home Directory Permissions and ACLs. Click the reset button there. The process takes a few minutes. When complete, restart.
http://osxdaily.com/2011/11/15/repair-user-permissions-in-mac-os-x-lion/

Fireworks frozen after sleep Mac OSX 10.6

Similar Messages

Maybe you are looking for