Fireworks not available to 'open with'

I installed Fireworks 8 and cannot get the program to appear
when I right click or use 'open with' and browse for it. I've
uninstalled and reinstalled to no avail. I tried using TweakUI and
it says 'cannot use this type of document' when I click on the
fireworks program icon. Any ideas would be greatly appreciated!

Yes, I had that same problem.
Note: I run CS3 on Windows Vista x64 and therefore the
prgrams are placed in Program Files (x64)
I made a textfile and put the following text in it:
<code>
Windows Registry Editor Version 5.00
[HKEY_CLASSES_ROOT\*\shell]
[HKEY_CLASSES_ROOT\*\shell\Open with Fireworks CS3]
[HKEY_CLASSES_ROOT\*\shell\Open with Fireworks CS3\command]
@=C:\Program Files (x86)\Adobe\Adobe Fireworks
CS3\Fireworks.exe %1
[HKEY_CLASSES_ROOT\*\shell\Open with Dreamweaver]
[HKEY_CLASSES_ROOT\*\shell\Open with Dreamweaver\Command]
@=C:\Program Files (x86)\Adobe\Adobe Dreamweaver
CS3\Dreamweaver.exe %1
[HKEY_CLASSES_ROOT\*\shell\Open with Photoshop CS3]
[HKEY_CLASSES_ROOT\*\shell\Open with Photoshop CS3\command]
@=C:\Program Files (x86)\Adobe\Adobe Photoshop
CS3\Photoshop.exe %1
</code>
Make sure you put in the proper map name for programs if
needed.
Save this file and rename the extension from .txt to .reg.
Than double clik the reg file and your registry will be updated
with the above info. After that you will find three more options in
the context menu.
Hope this helps.

Similar Messages

Fireworks not listed in Open With in Vista

can't get jpgs to Associate with Fireworks CS3 in Vista - if
i select "Choose Default Program" and browse to Fireworks.exe it
still won't show up in the dialog. also doesn't appear in Open With
in the Context menu...
in the Default Programs option in Control Panel it's the same
issue.
Anybody?

Yes, I had that same problem.
Note: I run CS3 on Windows Vista x64 and therefore the
prgrams are placed in Program Files (x64)
I made a textfile and put the following text in it:
<code>
Windows Registry Editor Version 5.00
[HKEY_CLASSES_ROOT\*\shell]
[HKEY_CLASSES_ROOT\*\shell\Open with Fireworks CS3]
[HKEY_CLASSES_ROOT\*\shell\Open with Fireworks CS3\command]
@=C:\Program Files (x86)\Adobe\Adobe Fireworks
CS3\Fireworks.exe %1
[HKEY_CLASSES_ROOT\*\shell\Open with Dreamweaver]
[HKEY_CLASSES_ROOT\*\shell\Open with Dreamweaver\Command]
@=C:\Program Files (x86)\Adobe\Adobe Dreamweaver
CS3\Dreamweaver.exe %1
[HKEY_CLASSES_ROOT\*\shell\Open with Photoshop CS3]
[HKEY_CLASSES_ROOT\*\shell\Open with Photoshop CS3\command]
@=C:\Program Files (x86)\Adobe\Adobe Photoshop
CS3\Photoshop.exe %1
</code>
Make sure you put in the proper map name for programs if
needed.
Save this file and rename the extension from .txt to .reg.
Than double clik the reg file and your registry will be updated
with the above info. After that you will find three more options in
the context menu.
Hope this helps.

Photo from iMessage saved to my camera role, how come the saved photo is not available to edit with iPhoto on my iPhone?

When I save a photo from iMessage to my camera role, how come the saved photo is not available to edit with iPhoto on my iPhone?

I tapped a photo in Messages to vie it full screen.
Tapped the Share icon and saved it to my camera roll.
Opened iPhoto for iOS and my image library updated. After the update I could see the image in my camera roll. I selected the amera roll, then tapped the image I had copied from Messages. I was able to edit the photo with no problem.
Did you follow this same procedure or ry to copy the little thumbnail photo from Messages?

TS3274 After iPad update I can't access my notes! Crashes opening with blank page. I have tried turning on and off. I have tried the reset to original. I have tried downloading again. Now what? I have important information that I need to get....

After iPad update I can't access my notes! Crashes opening with blank page. I have tried turning on and off. I have tried the reset to original. I have tried downloading again. Now what? I have important information that I need to get....

If you have set this phone up, then there would not necessarily be a solution here until you have been verify with the provider that everything is provisioned correctly on their end. Since the 3G comes from your cellular provider, if the settings are correct on the phone, then you should work with the carrier next.

HT204382 why i am not available to open track?

hello tram
ia m not available to open track ? why ? and also i am not able to donwaload to xl.office micro soft office?

If the gps and internet connection was always on the batt would last for a few hours tops
So you're not able to track it because of that

Plug-ins not available when opening Garageband song with Logic-Pro 7.0.1

Can anyone help?
Whilst on the move recently I found myself composing a piece using Garageband. However when I got back to the studio and attempted to open the song using Logic Pro 7.0.1 I get:
Core Audio: Plug-in "BassAmpSi" not available! then
Core Audio: Plug-in "Hybrid Bas" not available!
As these must be Garageband instruments I don't understand why they're "not available" or what to do to make them available.
Any ideas?
Thanks everybody!

I googled this topic and found a Logic forum - they said you should update your software to 7.1, then the problem vanishes.

Compressor is not a finder "open with" recommended application for qt's

On my macbookpro If I select a quicktime file in the finder and go to the file:open with:recommended applications, compressor is not a choice. I can easily choose it as a nonrecommended application, but it's a bit of a pain. The same is true for a quicktime export from fcp (the first quicktime export option, not quicktime conversion) which has a fcp icon not a qt icon. On my G5 tower, qt files do have compressor as an option for open with, but fcp exports, do not.
Obviously I could change the "open with" option in the file info for either an individual file or all files of this type, but I just want compressor available in the "open with" list for either file type.
This ain't a deal breaker, just a minor annoyance.
Message was edited by: Michael Grenadier

What version of FCS/FCP, Michael?
If you're using FCP 5.x, the issue with QuickTime Movie exports from FCP is because those movies do not have an .mov extension. You can't drag them to the Compressor icon on the dock and force Compressor to open, for instance, like you can for anything else that actually has a .mov extension.
As far as opening QT movies with Compressor, mind explaining why you're doing this? That is, you're opening them in Compressor for previewing purposes, correct?

Large size file could not copy from "Open with explorer" in SharePoint.

Hi,
I have uploaded around "120 mb" file in Document Library. I was trying to copy that file from "Open with explorer" to my local system. I am getting "disk Space error".
Should i specify any size at any where in "Central Admin".
Thanks & Regards
Poomani Sankaran

To resolve this issue, follow these steps:
1. Click Start,
click Run, type regedit,
and then click OK.
2. Locate and then click the following registry subkey:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\WebClient\Parameters
3. In the right pane, right-click the FileSizeLimitInBytes value,
and then click Modify.
(If
FileSizeLimitInBytes does not exist then right-click the blank space in the right pane, click New, click DWORD
Value, type FileSizeLimitInBytes,
and then click OK)
4. Click on Decimal,
and type 4294967295 and click OK. Note The
default value for the file size limit is 50000000 bytes.
5. Quit Registry Editor. Restart the computer.
CAUSE
This issue occurs because a security change that was introduced in Windows XP SP2 affects the Web Distributed Authoring
and Versioning (WebDAV) redirector. This security change makes sure that an unauthorized server cannot force a client computer into a denial of service attack. If you try to download a file that is larger than 50000000 bytes, the client computer interprets
this download as a denial of service attack. Therefore, the download process stops.
IMPORTANT
This section, method, or task contains steps that tell you how to modify the registry. However, serious problems might
occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps carefully. For added protection, back up the registry before you modify it. Then, you can restore the registry if a problem occurs. For more information about how
to back up and restore the registry, click the following article number to view the article in the Microsoft Knowledge Base
How to back up and restore the registry in Windows
http://support.microsoft.com/kb/322756

In App Purchase showing "Service Not available" Message box with error code 805a01f4

Hi all ,
I am developing a windows phone silverlight 8.1 application .When i trying to buy my public app product using credit card i am getting message Service not available ."The store isn't available at the moment.Please check back
in a bit . This error code may be helpful : 805a01f4 ."
Please tell me how to resolve .
Thank you

Thanks for your response .
I try it many times . reboot the device and try again . . but still showing the same message . . but when i buy using "IDEA" .downloaded it without showing any error message . After few seconds got a message on my number that "Dear customer,
thank you for downloading Awsome from MICROSOFT .You have been charged RS.55. Your balance is Rs.xxx " . Then, what is the problem with credit cards ? Why it showing the Service not available message ?

Program not showing in open with context for HTML files

I have a windows 8.1 64 Pro PC with a program called 1stPage.exe installed.
When I right click a .txt file I get 'Edit with 1st Page' in the context menu and it also shows in the open
with menu.
However HTML files do not show these options. I have checked the registry and it would appear that the program
is set up on the open with menu exactly the same for both file types.
So it would appear that something is blocking 1stPage from showing against HTML files but I can't figure out
what I need to change.
Cheers
Baz

OK we have further developments
I tried installing this program on a Windows 7 32bit machine and I get exactly the same issue.
I tried it with both IE and chrome as default browsers and I tried changing default html editor.
I therefore suspect this when this program installs it is not setting all the registry entries windows 7/8
require.
I know it's an old program but I have been using it for years and see no reason to change.
So I need help in understanding what I need to do to get windows 7/8 to display the context menu entry correctly

Appended Comments Fields Not displaying in Open with Access SharePoint 2013

i have a Issues List which is actively been used as a helpdesk ticketing system amongst one of the groups within my organization. Within that list we have Comments Field( Multiple Line Of text) and its set to Append changes to existing text.
One of the Office Admins uses the "Open with Access" Feature of that list to open the list in the access view and do some reporting. We are able to open the list in the Access, but Comments Field is not displaying the appended comments in that
Comments field we talked about above.
Is there something, i need to tunr on to activate that or is it not supported?
Your insights would be helpful

Hi Octopus,
I understand that you want to display the Appended changes to the multiple line of text field when using "Open with Access".
Per my knowledge, the “Append change to existing text” feature is the feature of the item view.
It calls the “Comments” data from the versions and display them on the item view. It is just a “view".
The original data of the versions does not locate in the list items but in the version files.
The contents of the “Comments” column are the latest update contents of this column exist in this list.
So, the contents in the versions will not be displayed in Access when using Open with Access, even if using Export to Excel.
It is by design.
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Touchup Object tool not available to colleague with Acrobat 9

Is the TouchUp Object tool only available in Acrobat 9 Pro? A colleague who has Acrobat 9 Standard doesn't appear to have it in his Advanced Editing options. Is there something that can be done to make that option available? I looked at the comparison chart and it didn't indicate there was any difference.
Thanks in advance.

It is not available in Acrobat Standard:
http://acrobatsupport.com/differences-between-acrobat-professional-standard/

ORA-01034: ORACLE not available when connect with connect string

Hi,
Database version is- 10.1.0.5.0 on Veritas Cluster, We are able to connect without giving connect string. but when we provide connect string as orcl it gives
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
when we do tnsping it works
$ tnsping orcl
TNS Ping Utility for Linux: Version 10.1.0.5.0 - Production on 08-MAY-2013 15:00:40
Copyright (c) 1997, 2003, Oracle. All rights reserved.
Used parameter files:
/D01/OIDTEST/network/admin/sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = cluster_hostname)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = orcl.test.com)))
OK (0 msec)
tnsnames.ora entry :-
ORCL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = cluster_hostname)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orcl.test.com)
listener.ora entry:-
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = orcl.test.com)
(ORACLE_HOME = /D01/OID)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = cluster_hostname)(PORT = 1521))
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
listener log contains
08-MAY-2013 14:47:03 * (CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=orcl.test.com)(CID=(PROGRAM=sqlplus)(HOST=physical_hostname)(USER=oraprod))) * (ADDRESS=(PROTOCOL=tcp)(HOST=xx.yy.zz.xx)(PORT=63969)) * establish * orcl.test.com * 0
08-MAY-2013 14:50:49 * ping * 0
08-MAY-2013 14:51:21 * 12502
TNS-12502: TNS:listener received no CONNECT_DATA from client
WARNING: Subscription for node down event still pending
08-MAY-2013 14:51:33 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=physical_hostname)(USER=oraprod))(COMMAND=status)(ARGUMENTS=64)(SERVICE=LISTENER)(VERSION=168822016)) * status * 0
can you please advice.
Thanks
Edited by: user10702579 on May 8, 2013 11:09 AM

Hi,
lsnrctl services
LSNRCTL for Linux: Version 10.1.0.5.0 - Production on 09-MAY-2013 08:26:47
Copyright (c) 1991, 2004, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=cluster_hostname.test.com)(PORT=1521)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0
LOCAL SERVER
Service "orcl" has 1 instance(s).
Instance "orcl", status UNKNOWN, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0
LOCAL SERVER
The command completed successfully
$
Thanks

Photshop CS6 not showing as `open-with` for desktop/external hard.drive images

Hi, I have CS6 and am using Photoshop, but when I try to open any image on my desktop the `open with` option dosent include Photoshop CS6, only other Adobe applications; even when I browse I can only find the Adobe systems file, with the .exe doc; I have a lot of images to edit, preferably without having to open Photoshop and individually open them from their folders; any advice on how to make Photshop CS6 `open-with`-able for any desktop/external hard drive images?

Thanks for raising this issue. I found the answer at: http://www.flickr.com/groups/photoshopsupport/discuss/72157630067784368/. Hope it works. I have done it but I believe I must now reboot before trying it.

Fonts not available in IDCC2014, with Suitcase Fusion 5 or 6

I have opened and worked a InDesign CC2014 doc. Everything is fine. The next day I attempt to open the doc again with the same fonts installed and they come up missing. I try several Macs, (different OSs), different versions of Suitcase Fusion including the latest and I get the same issue. Cleared font cache, restarted, etc to no avail. Any ideas? This has happened over the years occasionally, and has seemed to happen recently on a few occasions.
Thanks

That's a large part of the problem. You have more than one font manager on your Mac. If you're not using Font Book, delete it. Then you need to reset its orphaned database so OS X stops trying to control which fonts are, or aren't active according to that data.
To remove Font Book from the hard drive, follow these steps:
1) Open Font Book, and then its preferences. Uncheck the box for "Alert me if system fonts change". Close the preferences and shut down Font Book. Put the Font Book application in the trash and delete it.
2) Restart your Mac and immediately hold down the Shift key when you hear the startup chime to boot into Safe Mode. Keep holding it until OS X asks you to log in (you will get this screen on a Safe Mode boot even if your Mac is set to automatically log in). Let the Mac finish booting to the desktop and then restart normally.
This will reset Font Book's database and clear the cache files in your user account. The main goal in this step is to remove the orphaned Font Book database from the hard drive. With the Font Book application no longer on the hard drive, a new one cannot be created. Which is what we want.
3) Close all running applications. From an administrator account, open the Terminal app and enter the following command. You can also copy/paste it from here into the Terminal window:
sudo atsutil databases -remove
This removes all font cache files. Both for the system and all user font cache files. After running the command, close Terminal and immediately restart your Mac.

Fireworks not available to 'open with'

Similar Messages

Maybe you are looking for