Fireworks Screenshot paste of Windows Media oddity

If I play an mpeg video in Windows Media Player and take a
screenshot using ALT+Print Screen, then paste into Fireworks (or
Photoshop), the resultant raster image of the screen shot contains
a cut-out rectangle in the middle corresponding to the where the
video is, behind which is a raster image of the actual video, so
that if you move the screenshot, the video's raster image stays
stationary, and you see the screenshot moving over the top of it
with a cutout letting you glimpse the video underneath.
Can anyone explain this, and propose a solution?
Taking a screenshot of the screenshot does not remove this
phenomena.
Thanks,
Steve

On Fri, 08 Jun 2007 18:00:43 +0400, Doigy
<[email protected]>
wrote:
> If I play an mpeg video in Windows Media Player and take
a screenshot
> using
> ALT+Print Screen, then paste into Fireworks (or
Photoshop), the resultant
> raster image of the screen shot contains a cut-out
rectangle in the
> middle
> corresponding to the where the video is, behind which is
a raster image
> of the
> actual video, so that if you move the screenshot, the
video's raster
> image
> stays stationary, and you see the screenshot moving over
the top of it
> with a
> cutout letting you glimpse the video underneath.
>
> Can anyone explain this,
Just a wild guess - maybe tricks with overlays Windows used
to display the
video.
> and propose a solution?
If both image exist, why not select both and group them? Or
do I miss
anything?
Ilya Razmanov
http://photoshop.msk.ru -
Photoshop plug-in filters

Similar Messages

How can i take screenshots in windows media player

How can i take screenshots in windows media player.

If you mean "encrypted", the running Windows Media Player or Windows Media
Center IN a window and not full screen may allow you to take a screen shot of
the desktop in its entirety. That can be cropped to just the content wanted.
Here is an example
http://digitalmediaphile.com/content/binary/LookslikeNetflixMCEHDisRollingOut_5E2C/netflixMCEHDsm.jpg
On Sun, 27 Nov 2011 22:31:05 +0000, Laurent Gébeau [MToo] [MVP] wrote:
>
>
>Carefull : if the video is displayed by a video card accelerator (acquisition card for exemple) then it won't work.
>
>Screen capture only works for "windows content", not video incrusted signal.
>
>
>Laurent Gébeau
http://www.toutwindows.com
http://twitter.com/mtoo
Barb Bowman
http://www.digitalmediaphile.com

How to get rid of duplicate files in Windows Media Player 11, I am seeking an answer if at all possible.

I don't know if this is the appropriate forum to ask this question....if it is not please guide me to the correct support forum. I am just trying to find out if there is an easier way of getting rid of duplicate files in my Windows Media Player 11.
Also how do I prevent my Media player from obtaining all these duplicate files from other libraries. I have iTunes installed and my home network has four other computers belonging in the home group that have all their own respective music libraries.
I guess I was naïve but I thought that when Windows Media Player is out searching other libraries it would know not to take duplicates of songs that it has already. Enough said .....if anyone out there can help me that would be great. I have in
the past spent many hours manually deleting songs from my music files and it really got old.

Unfortunately your post is off topic here, in the TechNet Site Feedback forum, because it is not Feedback about the TechNet Website or Subscription. This is a standard response I’ve written up in advance to help many people (thousands, really.)
who post their question in this forum in error, but please don’t ignore it. The links I share below I’ve collected to help you get right where you need to go with your issue.
For technical issues with Microsoft products that you would run into as an
end user of those products, one great source of info and help is
http://answers.microsoft.com, which has sections for Windows, Hotmail, Office, IE, and other products. Office related forums are also here:
http://office.microsoft.com/en-us/support/contact-us-FX103894077.aspx
For Technical issues with Microsoft products that you might have as an
IT professional (like technical installation issues, or other IT issues), you should head to the TechNet Discussion forums at
http://social.technet.microsoft.com/forums/en-us, and search for your product name.
For issues with products you might have as a Developer (like how to talk to APIs, what version of software do what, or other developer issues), you should head to the MSDN discussion forums at
http://social.msdn.microsoft.com/forums/en-us, and search for your product or issue.
If you’re asking a question particularly about one of the Microsoft Dynamics products, a great place to start is here:
http://community.dynamics.com/
If you really think your issue is related to the subscription or the TechNet Website, and I screwed up, I apologize! Please repost your question to the discussion forum and include much more detail about your problem, that could include screenshots
of the issue (do not include subscription information or product keys in your screenshots!), and/or links to the problem you’re seeing.
If you really had no idea where to post this question but you still posted it here, you still shouldn’t have because we have a forum just for you! It’s called the Where is the forum for…? forum and it’s here:
http://social.msdn.microsoft.com/forums/en-us/whatforum/
Moving to off topic.
Thanks, Mike
MSDN and TechNet Subscriptions Support

Bug & Conflict w/ Palm Destop 6 & Windows Media Player

I am a long time Palm user but my T2 was not getting much use considering I was already carrying Two cell phones. But I was excited to get an upgrade to a Centro for one of my phones. Now I am dealing with the differences between PalmDesktop4 (PD4) and PD6 on Windows XP SP3.
I found what appears to be a critical bug in the installation of PD6 in that it has some very undesirable interactions with Windows Media Player (WMP) 10 & 11. Let me preface by saying that I am not using WMP or PocketTunes for any syncing or transferring any media to my Centro. My Centro is only used for calendar, contacts, calculators, and Docs2Go.
I have installed PD6 and the PD6 user data to a removable drive for personal privacy on a work computer. The error is that when ever the drive is not mounted and wmplayer.exe is started, Windows searches for the Palm Access Installation package on my removable drive and attempts to start a installation of PD6. Of course it does not find the .msi and the only thing that happens is my computer locks up till I close WMP and then the ACCESS installer goes away. If the removable drive is mounted with the PD6 application directory and the PD6 user data, WMP loads quickly and appears to work fine.
Why is WMP trying to connect to applications or support files in the PD6 application directory?
I can only assume that the new PD6 media tab now is hooked into some windows media services. PD6 must be registered as a client/helper app to windows media and WMP is trying to load or locate the registered resources.
The big problem with this is that my user data path gets over written with PD6 installation defaults in the Windows Registry and I have to manually reset all the PalmDesktop registry data to point PD6 at my really user path on the V: drive.
This should not be installed this way. The association between the two applications appears to be an error in the ACCESS installation package for PD6.
I used Palm.com “Chat” support four or five time for some very basic support in getting my new Centro setup. The Palm.com “Chat” support was great. For this issue they were absolutely useless. One support person affirmed that I should be able to use the removable drive, the next just had me do reinstalls for PD6 (that I had already done) and then told me I would have to use the defaults for C:\Program Files and D:\Documents and Settings\username... They recommended that I use the Palm.com phone support number.
I did this and it had to be one of the worse support calls I have made in a while (case number 1-51474282949). Why is it impossible to get any computer software or hardware company to support the desktop software they putout? I got the same tech support baby talk about “reinstalling the application”, “use the default installation path”, “its not our application” and “you will have to contact Microsoft for support on your operating system”. Ahhhhh!
I was not even able to speak with a “Level 2” tech support person. I demanded that I be connected to a technical person a not just fed the same FAQ crap that I could find on the website. The “Level 2” person would not take my call but just passed the message to the “Level 1” Person that I would have to contact Microsoft.
So I am posting this message here to the Palm fourm in hope that the software engineering team will see this and be able to either patch their software or give me the .reg key to break the association between WMP and PD6. Below I have posted a long list of my Chat support that explains the issues in further technical details, and also details the lack of detailed skilled support available at Palm.com.
Help? Direction?
I have my palm application directory installed to V:\PalmDesktop6App and the user data files installed to V:\jcollyer-files\PalmDataV6_001 This is a removable drive that I install on my work computer. I remove this drive and take it home with me. Doing this allows me the ability to keep my palm data secure but I can still use my computer at work to manage my palm data.
If the V:\ drive is not mounted when I run palm desktop, Palm desktop messes up the "Path" regestry key:
[HKEY_CURRENT_USER\Software\U.S. Robotics\Pilot Desktop\Core]
"DesktopPath"="V:\\PalmDesktop6App\\"
"HotSyncPath"="V:\\PalmDesktop6App\\Hotsync.exe"
"Path"="V:\\jcollyer-files\\PalmDataV6_001"
"UserConduitFolder"="C:\\Documents and Settings\\jcollyer\\Application Data\\HotSync\\Conduits"
"PIMVersion"="6.1.0"
"DesktopExe"="Palm.exe"
@=""
"Desktop Language"="ENG"
"INSTALLDIR"="V:\\PalmDesktop6App\\"
"VM_Username"="John Collyer"
When the key gets messed up it defaults to the standard palm desktop path:
"C:\Documents and Settings\jcollyer\My Documents\Palm OS Desktop"
I found this out because every time Windows Media player starts it tries to start Palm Desktop or the Palm Desktop install/remove program. I get a pop up window and progress bar that says “Palm Desktop by Access”. The only way to get rid of this pop up window is to shut down windows media player. So if my V: drive is not mounted just starting windows media player corrupts the user “Path” registry settings. It just so happens our work voicemail uses media player on the computer.
Dan(Sun Oct 19 2008 16:04:52 GMT-0400 (Eastern Daylight Time))>
1. Click on Start.
2. Click on Run.
3. Type "regedit" and click Ok.
4. Then Registry Editor window will open.
5. Double click on HKEY_CURRENT_USER.
6. Then click on +sign beside Software.
7. Now delete all the folders which start with Palm.
8. Also delete the folder called US robotics.
9. Now Double click on HKEY_LOCAL_MACHINE.
10. Then click on +sign beside Software.
11. Now delete all the folders which start with Palm.
LiveAssist Transcript
[Print] Print [Copy] Copy [Email] Email [Close] Close
chat id: 7f2a7664-50e8-40fb-8933-f82278d33b6d
Problem: Palm Deskto & Windows Media Player?
John_Collyer > I have my palm application directory installed to V:\PalmDesktop6App and the user data files installed to V:\jcollyer-files\PalmDataV6_001 This is a removable drive that I install on my work computer. I remove this drive and take it home with me. Doing this allows me the ability to keep my palm data secure but I can still use my computer at work to manage my palm data.
If the V:\ drive is not mounted when I run palm desktop, Palm desktop messes up the "Path" regestry key:
[HKEY_CURRENT_USER\Software\U.S. Robotics\Pilot Desktop\Core]
"DesktopPath"="V:\\PalmDesktop6App\\"
"HotSyncPath"="V:\\PalmDesktop6App\\Hotsync.exe"
"Path"="V:\\jcollyer-files\\PalmDataV6_001"
"UserConduitFolder"="C:\\Documents and Settings\\jcollyer\\Application Data\\HotSync\\Conduits"
"PIMVersion"="6.1.0"
"DesktopExe"="Palm.exe"
@=""
"Desktop Language"="ENG"
"INSTALLDIR"="V:\\PalmDesktop6App\\"
"VM_Username"="John Collyer"
Dan > Hello John_Collyer, Thank you for contacting Palm Technical Support. My name is Dan. How may I help you?
John_Collyer > When the key gets messed up it defaults to the standard palm desktop path:
"C:\Documents and Settings\jcollyer\My Documents\Palm OS Desktop"
I found this out because every time Windows Media player starts it tries to start Palm Desktop or the Palm Desktop install/remove program. I get a pop up window and progress bar that says “Palm Desktop by Access”. The only way to get rid of this pop up window is to shut down windows media player. So if my V: drive is not mounted just starting windows media player corrupts the user “Path” registry settings. It just so happens our work voicemail uses media player on the computer. I am using window media player 11.
What the heck is going on? How can I stop Windows Media Player from triggering the palm desktop application? Better yet why does it even try?
It does this when I simply open windows media player, even without a file. Just opening the Windows Media player application by it’s self causes this behavior.
Dan > Please let me go through the information you have provided.
John_Collyer > Ok standing by...
Dan > I understand that you have issue with the Palm Desktop and windows Media player getting messed up .
Dan > Sure I will guide with the issue .
Dan > May I know since when you are facing the issue ?
Dan > Please let me know the Operating System you are using. Is it Windows 95/98/ME/NT/2000/XP/Vista or MAC?
John_Collyer > I had this problem from the first install about two weeks. I use PalmDesktop 4 with my T2 for years on a removable drive never had an issue. PD6 only allows me to set the user path during installation. So I have been having issues with the reg keys getting messed up for a while. I though just creating a .reg file to fix the problems was going to be simple till I found windows media player was trying to autostart palm software???
John_Collyer > Windows XP SP3
John_Collyer > I am a new owner of the Palm Centro not using the T2 with PD6
Dan > Thank you for information .
Dan > I got the issue .
Dan > There are more than one version of the Palm software in the computer .
John_Collyer > No only PD6 now
Dan > That's reason the Drivers in the Registry are messing up and causing the issue .
Dan > Okay .
Dan > Do you have any data in the Palm Desktop ?
John_Collyer > Yes, when the V: drive is mounted everything works great, perfect. Windows Media player even load without a hitch. I would even deal with the .reg fix work around I made to over write the registry. I still don't understand why the application tries to load when it is installed on the V: drive if the v: drive is not present. It has to be the install/uninstall .msi file that runs the Add/Remove programs feature in widows control panel. Why does any of this change the user path?
Dan > I will explain you .
Dan > The reason for change of the path is with the corrupted applications and computer settings .
John_Collyer > Sorry, Why would the .msi file run if Windows Media is started?
Dan > .MSI file is the supporting file for Windows Media player .
Dan > That's reason for executing of .msi file during the windows media player .
Dan > To fix the issue we must perform clean uninstall and reinstall so that you will not have any further issue .
Dan > Let me know if you are comfortable with the clean uninstall and reinstall if the Palm software .
John_Collyer > I've uninstalled PD6 and reinstalled it like 12 times. If the V: drive is missing it really messes up the PD6 software. To keep me from doing this by launching PD6 from the C: drive I installed it to V:. No .exe no launchy. It works fine. What is hooking into windows media player. A .msi is a Microsoft install package, not a media file. We can do a clean install but why would running windows media player start the palm install/uninstall .msi file? I have not heard why?
John_Collyer > All my installs have worked fine. Unless there is a deeper cleaning process you can help me with other than running the remove program, is it worth trying AGAIN?
Dan > Did you perform clean uninstall and reinstall >
John_Collyer > Clean = remove program, reinstall, and sync to a new user folder? Then Yes. Other options?
Dan > No we need top perform few other steps .
John_Collyer > Ok shall I "Remove Program"?
Dan > No please wait .
Dan > First please let me know if you have any data in the Palm Desktop in the computer .
John_Collyer > Yes, but it is also going to be kept in the phone correct? It will survive if we create a new user folder right?
Dan > Yes .
Dan > Please let me know the user name given during the Sync .
John_Collyer > Well then I think it is safe, I have recently hotsynced so the data should be a match?
John_Collyer > John Collyer
Dan > Cool .
Dan > Thank you for information .
Dan > In the computer open My documents -->Palm OS Desktop-->locate folder called CoolyJ .
Dan > In the computer open My documents -->Palm OS Desktop-->locate folder called CoolyJ .
John_Collyer > No user folder there.... It's on the V: drive V:\jcollyer-files\PalmDataV6_001\CollyeJ Yes?
Dan > Please wait .
Dan > Please right click on the Palm Desktop and then click on Properties .
John_Collyer > the .exe in V:\PalmDesktop6App or the shortcut in start menu?
John_Collyer > start menu= V:\PalmDesktop6App\Palm.exe
Dan > You will have the Palm Desktop icon on the computer desktop .
Dan > Okay .
Dan > Thank you for information .
Dan > Please take the back of the Palm Desktop data in the computer .
John_Collyer > Destop target = V:\PalmDesktop6App\Palm.exe tpp
John_Collyer > ??? Please take the back of the Palm Desktop data in the computer
Dan > I mean to tell you that we must save all data of the Palm Desktop in different location .
Dan > I will assist you .
Dan > In the computer open V:drive-->locate Palm folder .
Dan > Open Palm folder and check if you have folder called CoolyJ .
John_Collyer > V:\jcollyer-files\PalmDataV6_001\CollyeJ
John_Collyer > No CoolyJ
Dan > Okay .
Dan > In the computer open Vrive-->Collerfiles-->Copy Palm folder and paste on the computer desktop .
John_Collyer > done
Dan > Okay .
Dan > Do not delete the Pal folder that was copied to computer desktop .
John_Collyer > ok
Dan > First go to Start-->Control Panel-->Add/Remove Programs. There Palm or PalmOne or Palm Desktop will be listed. Click Remove against it.
Let me know once you are done with unistallation process.
John_Collyer > starting
John_Collyer > done, next
Dan > Now in the computer open V:drive-->Collerfiles-->Rename Palm folder to Palmold .
John_Collyer > already there
Dan > Okay .
Dan > Now we need to perform Registry Clean up .
Dan > Please perform the steps provided .
Dan > 1. Click on Start.
2. Click on Run.
3. Type "regedit" and click Ok.
4. Then Registry Editor window will open.
5. Double click on HKEY_CURRENT_USER.
6. Then click on +sign beside Software.
7. Now delete all the folders which start with Palm.
8. Also delete the folder called US robotics.
9. Now Double click on HKEY_LOCAL_MACHINE.
10. Then click on +sign beside Software.
11. Now delete all the folders which start with Palm.
John_Collyer > still working
Dan > Please take your time .
Dan > I will be with you .
John_Collyer > done
Dan > Cool .
Dan > You are pretty fast .
Dan > Now clean uninstall of the Palm software is done .
John_Collyer > I was already deep in the registry look at this all thats how I found the "Path"
John_Collyer > Now we reinstall? Can I still use the V: drive for application files and user data?
Dan > Yes .
Dan > You can use V:drive .
Dan > After you install the Palm software perform Sync and make sure that Sync is success .
Dan > And you will not have sny issue with the Windows media player messing up .
John_Collyer > Ok I will start the PD6 install now
Dan > Please go a head .
Dan > Thank you for all the cooperation and patience in the chat session .,
John_Collyer > working almost done
Dan > Awesome .
Dan > But after installation is complete we need to restart the computer .
Dan > We must restart the computer for necessary changes to take place .
John_Collyer > how do I get back to you in support?
Dan > I assure that you will not have any further issue ,
Dan > However if you do have any further issue .
Dan > Please login with the same user name and email address .
John_Collyer > Palm Support can find me after that?
Dan > Yes .
Dan > I will have Our chat session in Our Data Base .
John_Collyer > Ok then it is time for a restart?
Dan > So that once you re contact us we will check with the required information and pull the chat session already we have done with .
Dan > And proceed with the further steps .
Dan > Please go ahead .
John_Collyer > Till then, good bye...
Dan > Please let me know if I can be of any further help .
Dan > Analyst has closed chat and left the room
Did all this above. Still have Windows Media Player trying to launch the ACCESS .msi installer which creates these processes:
IDriver.exe (x5)
IdriverT.exe (x1)
MSIexec.exe (x3)
I have let windows media player and windows installer run a bit longer and I get a second window titled "windows installer" with the text:
The feature you are trying to use is on a network resource that is unavailable.
Click OK to try again, or enter and alternate path to a folder containing the installation package 'Palm Desktop by ACCESS.msi' in the box below.
[C:\DOCUME~1\jcollyer\LOCALS~1\Temp\_is4\]
this is the default text.
I browsed my way to C:\WINDOWS\Installer and found a new .msi for PD6 called C:\WINDOWS\Installer\45599.msi and renamed it to C:\WINDOWS\Installer\45599_PalmNeedsBetterSoftware_msi
Still have the same issues from above. I thought if the .msi failed to be found then the error might just get passed over. So I do not know where IDriver.exe or other MS Installer applications is getting the values for 'Palm Desktop by ACCESS.msi'?
Again it is very odd that the ACCESS installer it trying to run when windows media player is launched (even with out any media, app only). Please do not tell me to do another "Clean Install" that is just BABY-TALK tech support at this point!!! I need to know why the PalmDesktop ACCESS installer is hooking into Windows Media Player. There is no doubt something odd is going on. As long as the V: drive where my Palm Desktop applications and user data is stored there is no problem. As soon as the V: drive is off line I have all these issues.
I noticed that PalmDesktop now has advanced media tools to "Make Video" in the media tab of Palm Desktop. This is where you can export a .mpg slide show of all you photos from your palm photos.
I would bet you a free year of Verizon's wireless data plan that the new Palm Desktop is registered as some type of client application to windows media service. When windows media player loads it tries to register all the clients and the Palm media client application is not available so some how MS Windows tries to start the PalmDesktop installer to fix the client media application.
Please note that I am not using Pocket Tunes at all, not trying to sync pTunes with Windows media or Rhapsody or any other media junk. Right now I want my palm to just be a extra smart contact and calendar manager, that’s all.
PALM NEEDS TO PATCH THIS. Palm Desktop should call Windows Media when it needs it, not have Palm Desktop registered as a client application to Windows Media by default!
PLEASE TELL ME THERE IS A SIMPLE FAQ FIX FOR ALL NONSENSE???
Post relates to: Centro (Verizon)

Thank you so much for replying.
Yes I have removed and reinstalled WMP.
I had good results with the PD6 application installed on the default path onto the C: drive with the one exception that if the application was launched by accident and the user data path was not available, the PD6 application would blow away my custom user path registry settings. Now that I know what they are I have made a .reg file to repair my registry to my desired user data paths.
Installing the application on the removable drive appeared to help prevent me from launching the application by accident and overwriting my registry with default user paths.
So which is the less of the two evils?
If the application directory is not available, windows media player still tries to launch the .msi for installing PD6.
If I install the application to the C: drive but the user data to the removable drive, launching the PD6 application without the user data drive will still corrupt my registry settings for a user data path.
Both these issues seem like a logical (if not easy) fix that should be done in the PD6 application and installation package. I mean really, cannot anyone tell me why windows media player is checking the PD6 application directory? Why in PD4 did we have an option control for setting the user data path from the PD4 application? Why is this option not in the PD6 application, just the installer?
I am given a choice during installation to move the user data to another non default location. Why else would this be provided if not to accommodate my kind of request to store the user data into an alternate location other than “My Document”. Certainly Palm is not trying to force the users on how to protect and store their personal data?
Post relates to: Centro (Verizon)

Can't download plug in for windows media player. Have used download site and it says it worked, but plug in is not showing up on my list of plug ins.

I tried to hear a conference call on a website. Got a message, needed windows media plug in. Checked my plug ins, no windows media. Read tutorial on firefox support. Clicked on download. Got a window that asked for repair or change. Tried repair, then change. Need better directions on how to finish download. Got message download successful, but after closing firefox and reopening, still no plug in for windows media in list of plug ins. Went to site and could not hear conference.
Read support forum. Message about using about:config. Tried this, typed in about: config in start menu, but didn't see anything that looked like I could change to true like message said.
solved by opening internet explorer and going to website and listening to conference call on windows media player. There was a message saying click here if you want to enable media player. Did so, heard conference.
Tried using chrome. Got to hear conference yesterday. Today, there was same message about needing plug in when I tried to follow instructions to get plug in, it was as confusing and useless as firefox. The bottom line is I tried to do everything set forth in firefox's forum suggestions and can't get the windown media plug in to show up in my list of plug ins and can't hear conference calls on firefox.
Chrome did say they were working on getting plug in available at chrome store.
I agree with comments that I was able to go to web sites and hear calls before firefox made an update that removed my windows media plug in. The simple download fix, presumeably from windows, does not work, apparently because firefox can't find the fix. That is not the user's fault, and it looks like windows tried to provide a fix, and firefox won't recognize it.
Bottom line, it is easier to use another browser, than try and get the windows media player plug in installed on firefox. What good is a browser, if you can't hear a call on the website that the browser takes you to? Please make it easy to install the windows media plug in on firefox. Thank you..

Firefox can find plugins in several locations, but Firefox 21 changed the location of the "shared" plugin folder so older installers like the Microsoft Windows Media Plugin no longer drop the DLL file in the correct location.
There apparently are two ways to address this:
(1) Change a Firefox preference so that Firefox checks the old location. Here's how:
(i) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
(ii) In the filter box, type or paste '''plugins''' and pause while the list is filtered
(iii) Double-click '''plugins.load_appdir_plugins''' to switch its value from false to true.
This will take effect after you restart Firefox.
(2) Copy the plugins folder to the new location. Here's how on Win 7 64-bit:
Open a Windows Explorer window to:
C:\Program Files (x86)\Mozilla Firefox
Right-click and copy the '''Plugins''' folder
Double-click the '''browser''' folder to open it
Right-click and paste
Right-click the new copy of '''Plugins''' and rename it to '''plugins'''
After restarting Firefox, the plugins in that folder should now be available.
''Edit: I suggest just doing #1.''

How can I copy my iTunes library to windows media player?

Hi, I've spent all morning trying to consolidate all my music into Windows Media Player...so I can make playlists, etc. iTunes seems to be pretty tough....I've moved the library file around....copied, etc. and I can't seen to paste it into Windows Media Player. My itunes library has about 50 purchased songs, and another 100 from my own CDs.
Does anyone know how to do this? I'm getting really irritable over this!!!
Thanks in advance!

The iTunes purchased songs will not transfer to Windows Media Player. Unless you have the iTunes Plus versions, iTunes purchased files are copy protected.
There is nothing preventing you from adding the other files to Windows Media Player except for maybe file format. Did you rip the CDs to AAC or MP3 format. Don't know if WMP can play AAC. WMP has no problems with MP3.
To add MP3 files to WMP just add them using WMP functions.

Windows Media Player error message

On Saturday mornings for the last couple of years, I have tuned in via the internet to a radio station and particular program using the radio station's website and clicking on their link for my connection speed (cable). The Windows Media Player opens up and the broadcast begins. The past two weeks, when the Player window opens, I now get a message that says "The host is unreachable." I restarted my computer; same message. I've seen reference on some websites that it is a router problem. So I reset the router; still doesn't work. I reinstalled Media Player 9; same message. I'm baffled as to why this is happening all of a sudden. Can anyone help direct me? The router is Netgear and is about three years old. Thanks.

I have no problem doing so. You don't need Windows Media Player. Make sure you have Flip4Mac WMV installed:
http://www.versiontracker.com/dyn/moreinfo/macosx/28842

DVD playback issue with Windows Media Player

Hi,
This isn't an Encore specific question, rather, a DVD playback one. Has anyone had issue playing their replicated DVDs in Windows Media Player? I truly believe it's the media player, not the DVD. When we put a DVD in the drive and try to open it in WMP, it jumps right to a video, or jumps directly to the last place we were in a video.... it's not defaulting to the main menu.
Has anyone experienced this? Is it a programming glitch on my DVD? I feel like it's a WMP issue, as it's only happening on certain computers.
thanks.

WMP has never been a good player for DVD's. At some point in the past, much of that functionality was disabled my MS, in hopes to reduce piracy. For some versions, no burned DVD would even play, though replicated/pressed DVD's were supposed to play fine.
I use CyberLink's PowerDVD and it is fine, even with my burned DVD's. The free MediaPlayer Classic HC plays my discs well too, with full menuing.
Good luck,
Hunt

How do I install Windows Media Player on iBook

I have downloaded Windows Media Player to my desktop, but do not know how to find an appropiate progam in which to install it with. I would very much like to satch sports over the internet and Windows media palyer is required for most of my current subscriptions.
Forgive my ignorance, as it is my first day with an iBook or any Mac for that matter. (Really prefer it over my past PC's thus far)
Thanks to all.

Stuffit Expander is required to open the WMP download
any many others you'll encounter while using a Mac.
It's available free from Stuffit.com.
Thanks. Will do.

Windows Media Player 12 under Win 7 Pro 64 nolonger able to play DVD

Hello TechNet
"Windows Media Player cannot play this DVD because there is a problem with digital copy protection between your DVD drive, decoder, and video card. Try installing an updated driver for your video card."
It seems that I have recently joined the chorus of MS users who have a Media Player DRM issue, where DVD's that would work perfectly well in WMP12 and MCE are nolonger being recognised. The error message above is displayed now, every time a commercial DVD
movie is inserted into the DVD drive where WIN 7 Pro 64 autoplay is used to open WMP12, The instruction to update video drivers is also not the solution.
Considering that I have until recently, been able to play DVD with my current NVIDIA driver 314.22Whql (now updated to 332.21Whql) and my DVD drive remains exactly as before, the Codec's installed with Win7 Pro 64 WMP 12 are unchanged and were working
fine. I do not know now what has caused the removal of DRM or the suggestion that my MPEG2 codecs can nolonger allow access to commercial DVD content.
I have tried all the suggestions raised about this issue from other MS users and MPV's in the forum, I have renamed the DRM folder and reset Windows Media DRM as directed. I have checked for a suitable MPEG2 codec/decoder on my system of which I have
several choices, including the one installed with Win 7 Pro 64 / WMP 12.
I have checked to see if I have a region issue with my DVD drive, and can confirm that the DVD drive will play DVD content when Playing DVD with "NERO 9 Showtime", this proves to me that the codec/DVD decoder is working in
my system, I then try Win 7s MCE (Media Center) and WMP12, the result is a black unresponsive screen in MCE, and the error message noted above in WMP with a black screen in the player.
I would like to know if MS are working on a rectification for the issue, as none of the proposed solutions deliver any functionality back to MS default DVD players. Is there an update in the works to provide a definitive solution for WMP12 and MCE DVD functionality.
Could you provide any new ideas, other than those already proposed to regain DVD function under MS default DVD programs.
Cheers Jeff

Hi Sengupta,
Yes I have already tried - Reset DRM using the method described in a post by another MS MPV here in the forum.
This is the method I used :
1. First open My Computer go to Tools>FolderOptions>View> uncheck >Hide Protected Operating System Files >
so that I can see the DRM folder and its contents.
2. Go to C:\ProgramData\Microsoft\Windows\DRM >Delete the contents of the DRM folder, these hidden files and the Cache folder with its contents. (Cache,
blackbox.bin, drmstore.hds, IndivBox.key,
IndivBox_64.key, v2ksndv.bla, v3ks.bla,
v3ks.sec) DRM folder empty ready for DRM Reset via web link.
3. Go to start menu Find InternetExplorer > right Click icon select > Run as Administrator > Blank Web page opens > I then paste the link provided (http://drmlicense.one.microsoft.com/Indivsite/en/indivit.asp)
into the Url space > click Enter > a web page for Windows Media Technologies (Security Component Upgrade) opens.
4. I then click on the 'Upgrade Button' and wait for it to search for upgrade components (Progress Status: Upgrading security components.... ), A download dialog then appears asking me to proceed. I then click 'Upgrade' and wait for it to
finish downloading & installation
(Progress Bar). . The install then completes saying the upgrade was successful I then click 'Done' close Browser and restart Computer.
5. I then recheck inside the DRM folder that I had erased - the new downloaded files and Cache Folder with contents are all back inside the folder, as expected.
6. Upon restart I place a DVD that I know was working before into the DVD drive and wait, the DVD autostarts WMP12 with the onscreen DVD Disk navigation menu appearing. I then click 'Play' with in the menu option, to begin the
Movie.
7. The resulting error reappears when clicking Play
"Windows Media Player cannot play this DVD because there is a problem with digital copy protection between your DVD drive, decoder,
and video card. Try installing an updated driver for your video card."
I will try once more to Reset the DRM using the Tool you have linked to, and follow your instruction exactly. Will see how it goes! ............stay tuned
It would be much appreciated If you could research which MS update has broken DRM, the recent updates which I can think of right now would be :
nVidia - Graphics Adapter WDDM1.1, Graphics Adapter WDDM1.2, Graphics Adapter WDDM1.3, Other hardware - NVIDIA GeForce GTX 275
now replaced by Nvidia v332.21Whql Drivers.
Update for Microsoft .NET Framework 4.5.1 on Windows 7 and Windows Server 2008 R2 SP1 for x64-based Systems
Possibly,
Internet Explorer 11 for Windows 7 64bit ( which I have had to remove, rolling back to IE10 to allow use in another Forum without errors and glitches). something about IE11 Browser is not right, maybe a security component from IE11
has interfered with DRM (Just guessing though)
But I think it is more than likely a security update that was downloaded and installed at the same time as these other major Microsoft Update offerings.
Cheers Jeff

Web page music loads in IE but not Firefox. Have downloaded Windows Media Player Firefox plug in but still nothing. Any other suggestions?

Can't get any sound when I open one webpage in Firefox but sound works in Internet Explorer. sound files are .wmv and mp3 format.
I have Windows Media Player Firefox Plug in installed and set to always activiate. Also have Quicktime & Shockwave activated. Any suggestions. Operating system is Windows 7. Thanks

There are a couple issues here that might be the culprit. One is that the player is hidden using a variety of techniques and Firefox often suppresses hidden content because it can be annoying not to be able to control your experience with media. Another possible issue is that the embed tag doesn't specify a content type. Firefox appears to be guessing anyway, and in my case asking whether to activate the QuickTime plugin, but then nothing plays.
To test what would happen if both of those were addressed, you can run this script using Firefox's Web Console. It grabs the address of the media and creates a new embed that is visible and specifies the content type. Here's how to use it:
Select the following long line of code and copy it:
function reEmbedMpeg(em){var el=document.createElement("embed"); el.setAttribute("type","audio/mpeg"); el.setAttribute("src",em.src); el.setAttribute("style","height:20px;width:200px;position:fixed;right:0;top:0"); document.body.appendChild(el);} reEmbedMpeg(document.querySelector("embed"));
When viewing the problem page, press Ctrl+Shift+k to open the Web Console in the lower part of the tab.
Paste the code next to the caret (>>) on the bottom line and press Enter to run it. A player should appear in the upper left corner, the progress bar should show downloading and then the content should play.
Obviously it's not practical to hack every web page you find, but if this is your site or you would be interesting in contacting the owner, hopefully this post will help in getting this working in Firefox.

Jerky playback in Source Monitor (vs. Windows Media Player) ...

I am a new user of CS5.5. I've read the FAQ and other posts and understand that my machine is underpowered.
That said, why do my HD clips play smoothly with Windows Media Player or Quicktime, but play jerky in the PP Source Monitor? What is it about PP's source monitor player that causes clips to choke when they can play back smoothly on the same computer using other software? Are there any other workarounds other than a faster machine I can do in the meantime until I upgrade my hardware?
For example, I see the "render entire work area" option under the Sequence menu as noted above - is there any way to do something similar to get PP to (pre) render the clips in the Project Panel for follow up editing in the Source Monitor window?
What about batch encoding to an uncompressed format and then editing the resultant clips? I would be concerned about loss of quality here though. Being new to PP, not even sure this question makes any sense in the first place.
Thanks!
Jon

shooternz wrote:
I think that you are relating your own playback experience and one that may not be particular to all users or fair as a general statement about PPRO
Good news for you...its not designed that way and a great playback experience is possible.
Bad news is...you have to work out why you are not getting it!
(It has nothing to do with Quadro Cards because plenty of users with other cards have no issue either.)
Well, I'm just going by what I've seen in the past few years. When Premiere CS4 came out I had an Intel Quad Core 2.66 Ghz, 8 GB of RAM, Intel motherboard and an Nvidia 7950GT card. Playback was fine in Vegas, skipped frames in Premiere. Then on my current machine, an AMD 1090T 6 cores @3.2 Ghz, G.Skill 16 GB of RAM, a top of the line Gigabyte motherboard, and at first an ATI Radeon 4850HD, same thing, Vegas played fine, Edius much better (but nothing beats Edius in speed), and Premiere CS5 stuttered like crazy. Now, same machine but with an eVGA GTX570 instead of the ATI, Windows 7 x64, fresh install just one day old. Premiere CS6 does the same thing. If it's my machine, I have no idea what could it be, but the fact that it did the same on two different cards on this machine, and that Premiere CS4 used to do the same in a totally different machine, plus the fact that two other NLEs didn't have that issue, tells me Premiere has a problem at displaying video inside the GUI.
Maybe it could be that most people don't see stutter because they leave the playback quality in automatic? I'm sure I don't have any stutter if I do that, but it looks terrible. Some frames look fine, others look like the pixels got drunk and had a night out with crack whores Well, maybe that's an exaggeration, but you get the point.
If anyone has a suggestion I'd be happy to try it. It's not a terrible issue for me, I always edit with the TV set on and that is fed by the Matrox MXO2 Mini with perfect quality.

Windows media player 9 labview 7

I'm having problems with this, just as some other people have. After looking through the MSDN library, it seems all you need to do is place the Windows Media Player object in a front panel ActiveX control. Then on the block diagram, wire the object to a property node. Finally, wire the path to the URL property. This should load the file and automatically play it. Well, I've tried this with several different files. With all files, the video plays for the correct amount of time, but no picture shows up in the control on the front panel!
What's interesting is that if I place an older version of the control (6.4) on the front panel (which I could only do by copy-paste from an example someone posted here - it's not available i
n the Select Active X object box) and wire the path to the FileName property, it works perfectly.
I've attached an example showing this. Place the path to a video (I'm using .avi files) in the path control and run the vi.
Any ideas?
Dave.
==============================================
David Kaufman
LabVIEW Certified Developer
==============================================
Attachments:
WMP_test.vi ‏37 KB

I have version 9 also and here is a VI that works for me. I cannot remember if I got it from this forum or from LAVA but anyway this might work for you.
Joe.
"NOTHING IS EVER EASY"
Attachments:
show_video.vi ‏88 KB

Windows Media Player Extension Overrides Quicktime Plugin in IE 7 & 8

I have some .mp4 videos on my website that stream brilliantly with the Quicktime plug-in, in Firefox.
If I use IE, the information bar drops down and wants to use "Windows Media Player Extension." If a user allows it, the player turns into a WMP GUI. At that point it is impossible to switch back to the Quicktime Plug-in.
I'm afraid users will allow the WMP Extension and then never be able to watch the videos. Any suggestions?

Proper html page code would "force" the QuickTime browser plug-in be used instead of Windows Media Player even if the user had the .mp4 extension assigned to it.
http://www.qtbridge.com/pageot/
Free software that can write the code. You need only copy/paste it into your page.
You could also put the same codecs into a .mov container (simple Save As using QuickTime Player Pro). Nearly all users have the .mov file extension assigned to QuickTime.

Since I updated to firefox 5.0, the windows media player plug in for firefox doesnt work anymore :(

Ok I recently upgraded to firefox 5.0, and then when I went to a website that uses windows media player to watch videos and news reports, it said I needed to download the windows media player plug in for firefox. And yet I had already done that in the past. So it directs me to the plug in for windows media player 11, I download and install and it doesnt work. Website repeats the same message, you need to download plug in. It was working fine with firefox 4.0! I use the OS Windows 7, 64bit. Any help please?

Yes I did, at first it identified it as already there, so it gave the option of repairing it, etc, so I uninstalled the Windows Media Player, then Installed it again, and it still doesn't seem to work! I have the same problem with several other plug ins, in the add ons and plug in section of Mozilla tools, I see that say, "incompatible with firefox 5.0" but as days go by those add-ons, that are built by those other websites seem to be repairing it, but I wanted to know for something as important as windows media player plug in, am I the only one getting this problem? :/

Fireworks Screenshot paste of Windows Media oddity

Similar Messages

Maybe you are looking for