Firfox consumes lots of CPU. Hard drive is always spinning and clicking w firefox. RUNS SLOW.

Firefox is pretty much unusable early in a session. Gets better aftyer a while,say 10 minutes.

I too have a similar problem except I think mine is flash related. It's fine when just surfing and watching news/videos but when I play a flash game the hard drive starts spinning constantly and it takes minutes to switch applications or shut the game down. This usually happens at the beginning of a flash game, settles down for a while, and after 45-60 minutes it starts up again but the hard drive keeps spinning for another 15-30 minutes then settles down again for an even shorter amount of time and then repeats the cycle. It started doing this to me in firefox 6, but I've since upgraded to 7.0.1 and flash is up to date. I've run all the malware/virus checks, tested the drive, but can not find anything wrong. If I manage to get the resource monitor running, firefox plugin container usually is reading my pagefile.sys at 40-50 million bytes/min, plus a few more firefox entries running in the low millions/min. I know flash is a memory pig but I have 2 gig memory plus the virtual memory which I tried a couple of custom settings and then set back to default, with no change in performance

Similar Messages

HT3275 My Time Capsule has been backing up without any problems and all of a sudden it stops reading on my computer. The external hard drive beeps three times and the motter wont run within. What happened?

My Time Capsule has been backing up without any problems and all of a sudden it stops reading on my computer. The external hard drive beeps three times and the motter wont run within. The light that usually blinks while in use is no longer blinking and is on constant. What happened?

abailey46 wrote:
My Time Capsule has been backing up without any problems and all of a sudden it stops reading on my computer. The external hard drive beeps three times and the motter wont run within. The light that usually blinks while in use is no longer blinking and is on constant. What happened?
Sorry we are unclear as to the external hard drive and its connection to the TC..
For instance the light that blinks.. is that the TC or external hard disk or what.
Did you try just rebooting / restart the whole network in correct order.. modem.. router / TC.. external drive.. clients with 2min gap between each.
Are you actually running Snow Leopard as the profile states?
How old is the TC?

My macbook pro hard drive went bad and i bought a new one and installed it. Now i have the old corrupted hard drive in my hand and i am looking to recover my files from it, any suggestions please? too bad i never backed them up.

My macbook pro hard drive went bad and i bought a new one and installed it. Now i have the old corrupted hard drive in my hand and i am looking to recover my files from it, any suggestions please? too bad i never backed them up.

After you have installed the OSX on the new HDD in your MBP, install the old HDD in an enclosure and connect it to your MBP via USB. Then try to drag and drop your data to the new HDD.
If this proves unsuccessful, you may look for data recovery software on the Internet. There will be free trails to see if it will work or not. If the trial suggests that it will work, then you will have to purchase the software.
The last resort is a professional data recovery service that will offer NO guarantees and charge a lot of money.
As you now can appreciate, backups eliminate such predicaments.
Ciao.

My external hard drive will not open and only shows up in Disk Utilities. When I try yo repair it, it give me and error of invalid sibling link. How do I fix my external hard drive?

My external hard drive will not open and only shows up in Disk Utilities. When I try yo repair it, it give me and error of invalid sibling link. How do I fix my external hard drive?

Invalid sibling link may not be fixable by Disk Utility. (Disk Utility is very conservative, and will not attempt repairs that might cause you to lose data.)
It is an indication of serious Directory damage.
that leaves
a) third-party Utilities that will take those risks, or
b) re-initializing the drive (which deletes all your data) and restoring from another backup source.
c) "Copying off whatever files you can salvage" has gone by, and you cannot copy anything off a drive that will not mount. You may be able to use "rescue" programs such as prosoft engineering Data Rescue to copy files to another drive, but that sounds a lot better than its reality. You may get many files, but not get ANY filenames.

My aperture library lives on an external hard drive that is corrupt and I can not locate the library. I do have it backed up with TM. How do I safely restore the library from TM to my laptop? I am using the newest version of aperture on my macbook pr

My aperture library lives on an external hard drive that is corrupt and I can not locate the library. I do have it backed up with TM. How do I safely restore the library from TM to my laptop? I am using the newest version of aperture on my macbook pro.

Hello Sandra,
The article linked below details how to go about restoring items from Time Machine in Snow Leopard.
Mac OS X 10.6: Recovering items using Time Machine and Spotlight
http://support.apple.com/kb/PH6379
Sincerely,
Allen

I just need to know how you get an iTunes library off the original hard drive of a mac and onto an external hard drive and still have it work normally?

I just need to know how you get an iTunes library off the original hard drive of an imac and onto an external hard drive and still have it work as it normally would?

http://support.apple.com/kb/HT1449

I want to use my 1TB Seagate Hard drive for time machine and transferring files from Mac to PC.

For about a year I've been using my 1TB external hard drive for only time machine. To be honest, it wasn't until today that I tried to connect my hard drive to a PC and realize it isn't compatible. I read about partitioning the hard drive so that it can work both for time machine and transferring files between pc and mac. I'm not what you would call tech savvy, so I was wondering if I can get some advice on how to do this.
Thanks in advance.

To do it, you have to partition the hard disk, so you will have one partition for Time Machine and another one to store files and use them in a PC and Mac. To create the partition, follow these steps > http://pondini.org/OSX/DU3.html
In order to read and write in the external disk on the PC, you have to select "MS-DOS (FAT)" as "Format". If you choose any other option, the PC won't be able to read your external disk. Apart from that, note that you can't use files bigger than 4 GB with FAT. If you want to use the external disk with files bigger than 4 GB, you have to format your new partition in exFAT, and you have to do it on a PC

I made a bootable disc on an external hard drive, with Yosemite on it. I am running Snow Leopard on my iMac. How can I open the Yosemite disc from the desktop on my iMac? Does the external hard drive need to be connected to my iMac by firewire to

I made a bootable disc on an external hard drive, with Yosemite on it. I am running Snow Leopard on my iMac. How can I open the Yosemite disc from the desktop on my iMac? Does the external hard drive need to be connected to my iMac by firewire to do that?

kahjot wrote:
Snow Leopard's Startup Disk pref can’t see Yosemite volumes. So the only way to switch from Snow Leopard to Yosemite is to do what Niel mentioned. Doesn't matter whether it's connected by USB or Firewire, although performance via FW would be faster.
Are you saying that Yos/10.10, as a volume located in a mounted external drive won't appear as an option in Snow Leopard's Startup Disc, in Sys Prefs? I've never heard this one before. AFAIK any mounted volume, regardless of OS, should appear there. I would think that, if it appears in the Boot Picker/Startup Manager it would also appear and could be booted to from Snow's Startup Disk. I can't test this myself, since I don't have Yos. Is what you are saying documented somewhere?

My old computer had itunes and downloaded songs that I put on my ipod. My old computer got replaced years ago without saving hard drive info or passwords and my iPod burnt out and will not activate. How can I get access to my old songs on new computer.

My old computer had itunes and downloaded songs that I put on my ipod. Well, my old computer got replaced years ago without saving hard drive info or passwords and my iPod burnt out years ago and will not activate. I now have a new computer and iPod and I have an iTunes account on my iPhone5. How can I get access to my old songs on new computer? Are they lost for good? I have no info about my old computer and old account.

Downloading past purchases from the App Store ... - Support - Apple

My MacBook Pro hard drive is almost full and I wish to store my Aperture Library on an external drive, how do I do this and is the use of USB2 suitable or do I need to use a Firewire external hard drive?

My MacBook Pro hard drive is almost full and I wish to store my Aperture Library on an external drive, how do I do this and is the use of USB2 suitable or do I need to use a Firewire external hard drive?

You'll get better performance if you use a Firewire hard drive (especially if you buy a 7200 RPM drive). Firewire's IO speed is significantly faster than USB 2. USB 2 has a theoretical max speed of 480 Mbps except that it has extremely high over-head. The fastest speeds you can typically get are about 300 Mbps. Firewire, on the other hand, has very little overhead. The fastest speeds you can get are very nearly 800 Mbps. You will typically be constrained by the maximum read/write speed of the drive, not the speed of the I/O on the Firewire bus. Now if you had one of those nice shiny new Macs with the Thunderbolt I/O and a Thunderbolt drive (Light Peak) ... I think they alter space and time so that your data arrives before you know you want it.
Also... unless you want to buy a solid state drive (very expensive), try to keep your hard drives from becoming much more than about 60% full if you want great performance. A nearly "full" hard drive is, on average, only about half as fast as the same hard drive when nearly empty.
USB 2 will work perfectly fine... just not as fast.
Also... it's much safer to move the entire Aperture library than to "relocate masters". Your images must be managed. You can Aperture manage them, or you can manage them. But someone has to manage them. If you "relocate" them so that they are no longer stored inside the Aperture library then you'll need to work out a system of how you decide to organize things and it's critically important that you don't start moving files around or deleting things without Aperture's knowledge. If you do, you'll break the links to your masters and start having problems with missing masters. If you have Aperture manage the library then you don't need to worry about any of that stuff.... it's safer.
Do make backups (use the Aperture Vault or use some other backup program, but make sure you back up your work if you care about it.) There are only two kinds of hard drives in the world: (1) those that have failed and (2) those that are going to fail. There are no exceptions to this rule. Hard drives are cheap. Backup software is built into Aperture and into your Mac.

HT1386 Ever since I had to replace my PC hard drive, my outlook contacts and calendar no longer sync. It acts like it's syncing, but it isn't. I now have two hard drives - c and g, but I'm pretty sure the Outlook data is still on c. Any other ideas?

Hello - I just had to replace the hard drive on my pc, and now my Outlook calendar and contacts won't sync to my iphone 5s. I ended up getting two hard drives (C and G), so I'm afraid that might have something to do with it - although I'm pretty sure Outlook files still live in the normal place on C. Itunes sync acts as if it's working, but nothing changes on my phone. Any ideas? Thanks!!

"2MEM/1/4: DIMM3/J14"
Replace the memory in the DIMM 3 slot.
If you are running Mac OS X 10.5 you can use this program to test your G5's memory:
http://www.kelleycomputing.net/Rember/
It will subject your RAM to a more thorough test than Apple Hardware Test.

I'm installing windows 7 64-bit on my imac which I've done before but I get a message that the partition is GPT even after I format the bootcamp partition. I just upgraded my hard drive to a 3tb and I'm allocating 1tb for windows. How can I fix this?

I'm installing windows 7 64-bit on my imac which I've done before but I get a message that the partition is GPT even after I format the bootcamp partition. I just upgraded my hard drive to a 3tb and I'm allocating 1tb for windows. How can I fix this?

No easy fix for a few reasons:
1) Bootcamp requires a hybrid MBR for the partition table. That is: both an MBR and a GPT partition table at the same time with the GPT one having all partitions and the MBR one having only the ones that are relevant, but at most 4 of them (including the protective partition and the Macintosh HD one). Which leads us to:
2) The MBR part of the hybrid partition table cannot work with 3TB hard drives. MBR is limited to 2TB.
I am working on a small EFI app that can boot Windows in EFI mode on a Mac and that would mean that you can go GPT only on your system. The progress of the app is slow due to the nature of EFI and for now requires that you do an unattended Windows install with slipstreamed graphics drivers, but we are adding VGA loading on top of EFI quite soon after the rest of the app stabilises. The status of the app is documented at:
Win7 x64 booting natively via EFI (no bios emulation)
Windows does actually successfully boot in EFI mode on most Macs (anything with a 64bit EFI should work), but does not have graphics support even if you load the driver due to the VGA pci registers not being set by the firmware. Furthermore, in Setup and Safe Mode, Windows uses VGA instead of GOP which is a failure by design since VGA is a BIOS standard and not really compatible without hacks with EFI. Other EFI implementations also add VGA compatibility at a high cost to the firmware complexity for the VGA cards available on the market that don't actually contain anything in their ROM except the VGA BIOS.
My recomendations:
1) Install on a second smaller hard-drive; or
2) Wait for the EFI app to come out officially and use that to boot Windows Vista SP1 x64 and Windows 7 x64 (RTM and SP1) in the native EFI mode.
3) Wait for Windows 8 which supports VGA-less booting acording to the AMD presentation at UEFI Plugfest.

Hard Drive is not spinning up making rhythmic click sounds

Hello,
My Hard Drive is not spinning up and making rhythmic click sounds. I charged it completely. Tried to reset it but this results only in the Folder-Icon with a support link. It can not be connected to my computer anymore via USB. It is not recognized as a external disk anymore. I tried the disk mode too. nothing helps.
As I can't connect it to my computer anymore I can't reformat it.
Any ideas besides throwing it away...?
Thanks, Juergen
4G Click Wheel 40 Gig Windows 2000

Hello,
If a sad iPod icon or an exclamation point and folder icon appears on your iPod’s screen, or with sounds of clicking or HD whirring, it is usually the sign of a hard drive problem and you have the power to do something about it now. Your silver bullet of resolving your iPod issue – is to restore your iPod to factory settings.
http://docs.info.apple.com/article.html?artnum=60983
If you're having trouble, try these steps at different levels one at a time until the issue is resolved. These steps will often whip your iPod back into shape.
Make sure you do all the following “TRYs”
A. Try to wait 30 minutes while iPod is charging.
B. Try another FireWire or USB through Dock Connector cable.
C. Try another FireWire or USB port on your computer .
D. Try to disconnect all devices from your computer's FireWire and USB ports.
E. Try to download and install the latest version of iPod software and iTunes
http://www.apple.com/itunes/download/
For old and other versions of iPod updater for window you can get here
http://www.ipodwizard.net/showthread.php?t=7369
F. Try these five steps (known as the five Rs) and it would conquer most iPod issues.
http://www.apple.com/support/ipod/five_rs/
G. Try to put the iPod into Disk Mode if it fails to appear on the desktop
http://docs.info.apple.com/article.html?artnum=93651
If none of these steps address the issue, you may need to go to Intermediate level listed below in logical order. Check from the top of the lists to see if that is what keeping iPod from appearing on your computer in order for doing the Restore.
Intermediate Level
A. Try to connect your iPod with another computer with the iPod updater pre-installed.
B. Still can’t see your iPod, put it in Disk Mode and connect with a computer, instead of doing a Restore on iPod Updater. Go and format the iPod instead.
For Mac computer
1. Open the disk utility, hope your iPod appears there (left hand side), highlight it
2. Go to Tab “Partition”, click either “Delete” or “Partition”, if fails, skip this step and go to 3
3. Go to Tab “Erase” , choose Volume Format as “MAC OS Extended (Journaled), and click Erase, again if fails, skip it and go to 4
4. Same as step 3, but open the “Security Options....” and choose “Zero Out Data” before click Erase. It will take 1 to 2 hours to complete.
5. Eject your iPod and do a Reset
6. Open the iTunes 7 and click “Restore”
For Window computer
Go to folder “My Computer”
Hope you can see your iPod there and right click on the iPod
Choose “Format”. Ensure the settings are at “Default” and that “Quick Format” is not checked
Now select “Format”
Eject your iPod and do a Reset
Open the iTunes 7 and click “Restore”
In case you do not manage to do a “Format” on a window computer, try to use some 3rd party disk utility software, e.g.“HP USB Disk Storage Format Tool”.
http://discussions.apple.com/thread.jspa?threadID=501330&tstart=0
C. Windows users having trouble with their iPods should locate a Mac user. In many cases when an iPod won't show up on a PC that it will show up on the Mac. Then it can be restored. When the PC user returns to his computer the iPod will be recognized by the PC, reformatted for the PC, and usable again. By the way, it works in reverse too. A Mac user often can get his iPod back by connecting it to a PC and restoring it.
Tips
a. It does not matter whether the format is completed or not, the key is to erase (or partly) the corrupted firmware files on the Hard Drive of the iPod. After that, when the iPod re-connected with a computer, it will be recognized as an fresh external hard drive, it will show up on the iTunes 7.
b. It is not a difficult issue for a Mac user to find a window base computer, for a PC user, if they can’t find any Mac user, they can go to a nearest Apple Shop for a favor.
c. You may need to switch around the PC and Mac, try to do several attempts between “Format” and “Restore”
http://discussions.apple.com/thread.jspa?messageID=2364921&#2364921
Advance Level
A. Diagnostic mode solution
If you have tried trouble shooting your iPod to no avail after all the steps above, chances are your iPod has a hardware problem. The iPod's built-in Diagnostic Mode is a quick and easy way to determine if you have a "bad" iPod.
You need to restart your iPod before putting it into Diagnostic Mode. Check that your hold switch is off by sliding the switch away from the headphone jack. Toggle it on and off to be safe.
Press and hold the following combination of buttons simultaneously for approximately 10 seconds to reset the iPod.
iPod 1G to 3G: "Menu" and "Play/Pause"
iPod 4G+ (includes Photo, Nano, Video, and Mini): "Menu" and "Select"
The Apple logo will appear and you should feel the hard drive spinning up. Press and hold the following sequence of buttons:
iPod 1G to 3G: "REW", "FFW" and "Select"
iPod 4G+ (includes Photo, Nano, Video, and Mini): "Back" and "Select"
You will hear an audible chirp sound (3G models and higher) and the Apple logo should appear backwards. You are now in Diagnostic Mode. Navigate the list of tests using "REW" and "FFW". The scroll wheel will not function while in diagnostic mode. For further details on Diagnostic mode can be found at http://www.methodshop.com/mp3/ipodsupport/diagnosticmode/
Try to do the 5in1, HDD R/W and HDD scan tests. Some successful cases have been reported after the running the few tests under the Diagnostic mode. In case it does not work in your case, and the scan tests reports show some errors then it proves your iPod has a hardware problem and it needs a repairing service.
B. Format your iPod with a start disk
I have not tried this solution myself, I heard that there were few successful cases that the users managed to get their iPod (you must put your iPod in disk mode before connecting with a computer) mounted by the computer, which was booted by a system startup disk. For Mac, you can use the Disk Utility (on the Tiger OS system disk), for PC user, you can use the window OS system disk. Try to find a way to reformat your iPod, again it does not matter which format (FAT32, NTFS or HFS+) you choose, the key is to erase the corrupted system files on the iPod. Then eject your iPod and do a Reset to switch out from Disk Mode. Reboot your computer at the normal way, connect your iPod back with it, open the iPod updater, and hopefully your iPod will appear there for the Restore.
If none of these steps address the issue, your iPod may need to be repaired.
Consider setting up a mail-in repair for your iPod http://depot.info.apple.com/ipod/
Or visit your local Apple Retail Store http://www.apple.com/retail/
In case your iPod is no longer covered by the warranty and you want to find a second repairing company, you can try iPodResQ at your own risk
http://www.ipodresq.com/index.php
Just in case that you are at the following situation
Your iPod warranty is expired
You don’t want to pay any service charges
You are prepared to buy a new one
You can’t accept the re-sell value of your broken iPod
Rather than leave your iPod as paper-weight or throw it away.
You can try the following, but again, only do it as your last resort and at your own risk.
Warning !!!! – It may or may not manage to solve your problem, and with a risk that you may further damage your iPod, which end up as an expensive paper weight or you need to pay more higher repairing cost. Therefore, please re-consider again whether you want to try the next level
Last Resort Level
1. . Disconnecting the Hard Drive and battery inside the iPod – Warning !! Your iPod warranty will be waived once you open the iPod.
In Hong Kong there are some electronic shops offering an iPod service for Sad iPod, the first thing they do is to open up the iPod’s case and disconnecting the battery and the Hard Drive from the main board of the iPod. Wait for 5-10 minutes and reconnecting them back. The reason behind which I can think of is to do a fully reset of a processor of the iPod. In case you want do it itself and you believe that you are good on fixing the electronics devices and have experience to deal with small bits of electronic parts, then you can read the following of how to open the iPod case for battery and HDD replacement (with Quicktimes)
http://eshop.macsales.com/tech_center/index.cfm?page=Video/directory.html
2.Press the reset button on the Hard Drive inside the iPod – Suggestion from Kill8joy
http://discussions.apple.com/thread.jspa?messageID=2438774#2438774
Have I tried these myself? No, I am afraid to do it myself as I am squeamish about tinkering inside electronic devices, I have few experiences that either I broke the parts (which are normally tiny or fragile) or failed to put the parts back to the main case. Therefore, I agree with suggestion to have it fixed by a Pro.
2. Do a search on Google and some topics on this discussion forum about “Sad iPod”
Exclamation point and folder and nothing else
http://discussions.apple.com/thread.jspa?messageID=2831962#2831962
What should I do with my iPod? Send it or keep it?
http://discussions.apple.com/thread.jspa?threadID=469080&tstart=0
Strange error on iPod (probably death)
http://discussions.apple.com/thread.jspa?threadID=435160&start=0&tstart=0
Sad Face on iPod for no apparent reason
http://discussions.apple.com/thread.jspa?threadID=336342&start=0&tstart=0
Meeting the Sad iPod icon
http://askpang.typepad.com/relevanthistory/2004/11/meeting_thesad.html#comment-10519524
Sad faced iPod, but my computer won’t recognize it?
http://discussions.apple.com/thread.jspa?messageID=2236095#2236095
iPod Photo: unhappy icon + warranty question
http://discussions.apple.com/thread.jspa?messageID=2233746#2233746
4th Gen iPod Users - are we all having the same problem?
http://discussions.apple.com/message.jspa?messageID=2235623#2235623
Low Battery, and clicking sounds
http://discussions.apple.com/thread.jspa?messageID=2237714#2237714
Sad faced iPod, but my computer won’t recognize it
http://discussions.apple.com/thread.jspa?messageID=2242018#2242018
Sad iPod solution
http://discussions.apple.com/thread.jspa?threadID=412033&tstart=0
Re: try to restore ipod and it says "can't mount ipod"
http://discussions.apple.com/thread.jspa?threadID=443659&tstart=30
iPod making clicking noise and is frozen
http://discussions.apple.com/thread.jspa?messageID=2420150#2420150
I am not suggesting that you should follow as well, but just read them as your reference. You are the person to make the call.
Finally, I read a fair comments from dwb, regarding of slapping the back of the iPod multiple times
Quote “This has been discussed numerous times as a 'fix'. It does work, at least for a while. In fact I remember using the same basic trick to revive Seagate and Quantam drives back in the mid to late 1980's. Why these tiny hard drives go bad I don't know - could be the actuator gets stuck in place or misaligned. Could be the platter gets stuck or the motor gets stuck. 'Stiction' was a problem for drives back in the 80's. Unfortunately the fix can cause damage to the platter so we temporarily fix one problem by creating another. But I know of two instances where a little slap onto the table revived the iPods and they are still worked a year or more later.”UnQuote

Have a new PC desktop with 4 hard drives, new c, d and old c, d, My ipad library is in old c, how to get my itune open the right drive, it keeps on open in new c drive.

Have a new PC desktop with 4 hard drives, new c, d and old c, d, My ipad library is in old c, how to get my itune open the right drive, it keeps on open in new c drive. It said my computer is not authorized. I want to move all the old c to the new c drive, or get the itune to open my old c drive when I log in.

might be some help on one of these links.
Windows - Change iPad default backup location
http://apple-ipad-tablet-help.blogspot.com/2010/07/change-ipad-default-backup-lo cation.html
Windows - Changing IPhone and iPad backup location
http://goodstuff2share.wordpress.com/2011/05/22/changing-iphone-and-ipad-backup- location/
Sync Your iOS Device with a New Computer Without Losing Data
http://www.howtogeek.com/104298/sync-your-ios-device-with-a-new-computer-without -losing-data/
Syncing to a "New" Computer or replacing a "crashed" Hard Drive
https://discussions.apple.com/docs/DOC-3141
 Cheers, Tom

External Hard Drive Compatible with Mac and Windows?

So my old laptop is a Dell Latitude and I bought a Western Digital external hard drive and put all my files/pics/music on it. The information the WD came with said its compatible with Mac and Windows, but when I plug it into my brand spankin new Macbook, it doesn't register with the computer and won't show up. What's going on?
Message was edited by: philliesphan

I recently ran into that problem. In order to have the hard drive compatible for both PC and Mac it must be in a FAT32 format. In order to do this though all your files will be deleted (in order to reformat). You can do this by plugging in the hard drive into you mac and going under disk utility and there you will find your hard drive and under erase change the format to FAT32 and then you press erase (all will be deleted off the external drive though)

Firfox consumes lots of CPU. Hard drive is always spinning and clicking w firefox. RUNS SLOW.

Similar Messages

Maybe you are looking for