Firmware 1.1.1 size?

There's about a half gb discrepancy between the total size of my iTunes library and what iTunes says is "Used" on my iPod. Could this mean that the firmware is a half gb? Or why else would my iPod used space be a half gb more than my actual library? (I don't have photos & I don't use it as a hard drive.)

Library = 30.35 gb. iPod = 30.8 gb (capacity [55.6] - available [24.8]). iPod (30.8 gb) - Library (30.35) = 0.45 gb. But I don't know where it went?

Similar Messages

Latest Firmware for WRT300N V1.0

I have WRT300N V1.0 with Firmware v1.03.6.
Anybody know what is latest Firmware for WRT300N V1.0 and where I can get it.
I tried at Downloads under Support in Cisco website but it said "No firmware/driver download available".
Thanks

There were three versions available at the time:
Date:???
WRT300N-v1.1_1.51.2_fw.bin
6/1/2006
Firmware version 093.3
File size 2.93 MB
5/5/2006
Firmware version original
File size 1.41 MB
Linksys should bring back the download page. They are legally obligated to do so.
Copy and paste this link:
https://web.archive.org/web/20060702080428/http://www.linksys.com/servlet/Satellite?childpagename=US...

ITunes Burning Error 4200 - Windows XP

I recently purchased an HPa1130n running iTunes 4.9. It was working fine up until a week ago when I started getting errors that say "cancelling burn... unknown error 4200". I have read a few posts in this forum and would like for someone to help me get my system back up and burning. I've done the obvious (slowing the speed, trying different disks, etc). I've also checked my DMA settings to ensure that they are correct. From what I have read so far, I think iTunes is having trouble communicating with my CD Burner.
Help me obi-wan-kenobi.. you're my only hope...
Here is some of my info:
Hardware Information
CPU : AMD Athlon 64 Processor 3500+ 2190 MHz
Bus Speed : 199 MHz
Motherboard : MSI ALBACORE
System : HP a1130n
BIOS : Phoenix 3.12
Memory : 1024 MB (129ns)
Sound : Realtek AC97 Audio
Video : ATI RADEON Xpress 200 Series
Drive Information
Drive : HL-DT-ST DVDRRW GWA-4166B
Type : DVD±R/RW DL Recorder
Firmware Version : 1823
Buffer Size : 2 MB
Lower Filters
Driver : PxHelp20
Description : Px Engine Device Driver for Windows 2000/XP
Version : 2.03.27a
Company : Sonic Solutions
Upper Filters
Driver : GEARAspiWDM
Description : CDRom Class Filter Driver
Version : 2.0.4.0
Company : GEAR Software Inc.

Thanks for the prompt response b.
Here are some of the things you asked about:
(1) - The diagnostic log:
Microsoft Windows XP Professional Service Pack 2 (Build 2600)
iTunes 4.9.0.17
CD Driver 2.0.4.3
CD Driver DLL 2.0.3.1
LowerFilters: PxHelp20 (2.0.0.0),
UpperFilters: GEARAspiWDM (2.0.4.3),
Video Driver: VisionTek XTASY X300 SE Hypermemory
IDE\DiskST3250823AS____________________________3.03___, Bus Type ATA, Bus Address [0,0]
USBSTOR\DiskGenericUSB_CF_Reader__1.01, Bus Type USB
USBSTOR\DiskGenericUSB_MS_Reader__1.03, Bus Type USB
USBSTOR\DiskGenericUSB_SD_Reader__1.00, Bus Type USB
USBSTOR\DiskGenericUSB_SM_Reader__1.02, Bus Type USB
IDE\CdRomHL-DT-STDVDRRW_GWA-4166B_______________1823___, Bus Type ATA, Bus Address [0,0]
IDE\CdRomIDE-DVDDROM6216________________________HD07___, Bus Type ATA, Bus Address [1,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some Dell computers need an update to the ATA bus driver before iTunes recognizes CDs. If you have a Dell computer, check the Dell support website for details.
E: HL-DT-ST DVDRRW GWA-4166B, Rev 1823
Drive is empty.
F: IDE-DVD DROM6216, Rev HD07
Drive is empty.
(2) New software added
I recently installed NERO then updated to 6.6 trial. I suspect that this has something to do with it as the last time i burned a CD sucessfully was a day before I installed/updated NERO.
(3) I tried to alternatively burn in windows media player and was also unsucessful.
(4) I see a ton of 7 or 8 events ranging from 100, 101, 102, 103 that are related to database engines but nothing related to iTunes. I see two ACEEventLogs from today:
0000000001: 2005-09-03 12:40:07:203 Systemtray cannot start - ACE Runtime not detected
Error Called by: ATI.ACE.CLI.EXE.CLI::Main processID:00348 threadID:(CLISystemtray ) domainName:(CLI.exe ) assemblyName:(CLI, Version=1.2.2006.283, Culture=neutral, PublicKeyToken=90ba9c70f846762e)
(5) It just got worse. I attempted to burn another disk and now I don't even get the error. When prompted to insert a blank disk and after clicking the burn icon, the top grey screen just blinks "checking media" a bunch of times then it times out. I don't even get to the "preparing to write" stage.
Thanks again!
RR

Large number of Transport errors on ZFS pool

This is sort of a continuation of thread:
Issues with HBA and ZFS
But since it is a separate question thought I'd start a new thread.
Because of a bug in 11.1, I had to downgrade to 10_U11. Using an LSI 9207-8i HBA (SAS2308 chipset). I have no errors on my pools but i consistently see errors when trying to read from the disks. They are always Retryable or Reset. All in all the system functions but as I started testing I am seeing a lot of errors in IOSTAT.
bash-3.2# iostat -exmn
extended device statistics ---- errors ---
r/s w/s kr/s kw/s wait actv wsvc_t asvc_t %w %b s/w h/w trn tot device
0.1 0.2 1.0 28.9 0.0 0.0 0.0 41.8 0 1 0 0 1489 1489 c0t5000C500599DDBB3d0
0.0 0.7 0.2 75.0 0.0 0.0 21.2 63.4 1 1 0 1 679 680 c0t5000C500420F6833d0
0.0 0.7 0.3 74.6 0.0 0.0 20.9 69.8 1 1 0 0 895 895 c0t5000C500420CDFD3d0
0.0 0.6 0.4 75.5 0.0 0.0 26.7 73.7 1 1 0 1 998 999 c0t5000C500420FB3E3d0
0.0 0.6 0.4 75.3 0.0 0.0 18.3 68.7 0 1 0 1 877 878 c0t5000C500420F5C43d0
0.0 0.0 0.2 0.7 0.0 0.0 0.0 2.1 0 0 0 0 0 0 c0t5000C500420CE623d0
0.0 0.6 0.3 76.0 0.0 0.0 20.7 67.8 0 1 0 0 638 638 c0t5000C500420CD537d0
0.0 0.6 0.2 74.9 0.0 0.0 24.6 72.6 1 1 0 0 638 638 c0t5000C5004210A687d0
0.0 0.6 0.3 76.2 0.0 0.0 20.0 78.4 1 1 0 1 858 859 c0t5000C5004210A4C7d0
0.0 0.6 0.2 74.3 0.0 0.0 22.8 69.1 0 1 0 0 648 648 c0t5000C500420C5E27d0
0.6 43.8 21.3 96.8 0.0 0.0 0.1 0.6 0 1 0 14 144 158 c0t5000C500420CDED7d0
0.0 0.6 0.3 75.7 0.0 0.0 23.0 67.6 1 1 0 2 890 892 c0t5000C500420C5E1Bd0
0.0 0.6 0.3 73.9 0.0 0.0 28.6 66.5 1 1 0 0 841 841 c0t5000C500420C602Bd0
0.0 0.6 0.3 73.6 0.0 0.0 25.5 65.7 0 1 0 0 678 678 c0t5000C500420D013Bd0
0.0 0.6 0.3 76.5 0.0 0.0 23.5 74.9 1 1 0 0 651 651 c0t5000C500420C50DBd0
0.0 0.6 0.7 70.1 0.0 0.1 22.9 82.9 1 1 0 2 1153 1155 c0t5000C500420F5DCBd0
0.0 0.6 0.4 75.3 0.0 0.0 19.2 58.8 0 1 0 1 682 683 c0t5000C500420CE86Bd0
0.0 0.0 0.2 0.7 0.0 0.0 0.0 1.9 0 0 0 0 0 0 c0t5000C500420F3EDBd0
0.1 0.2 1.0 26.5 0.0 0.0 0.0 41.9 0 1 0 0 1511 1511 c0t5000C500599E027Fd0
2.2 0.3 133.9 28.2 0.0 0.0 0.0 4.4 0 1 0 17 1342 1359 c0t5000C500599DD9DFd0
0.1 0.3 1.1 29.2 0.0 0.0 0.2 34.1 0 1 0 2 1498 1500 c0t5000C500599DD97Fd0
0.0 0.6 0.3 75.6 0.0 0.0 22.6 71.4 0 1 0 0 677 677 c0t5000C500420C51BFd0
0.0 0.6 0.3 74.8 0.0 0.1 28.6 83.8 1 1 0 0 876 876 c0t5000C5004210A64Fd0
0.6 43.8 18.4 96.9 0.0 0.0 0.1 0.6 0 1 0 5 154 159 c0t5000C500420CE4AFd0
Mar 12 2013 17:03:34.645205745 ereport.fs.zfs.io
nvlist version: 0
     class = ereport.fs.zfs.io
     ena = 0x114ff5c491a00c01
     detector = (embedded nvlist)
     nvlist version: 0
          version = 0x0
          scheme = zfs
          pool = 0x53f64e2baa9805c9
          vdev = 0x125ce3ac57ffb535
     (end detector)
     pool = SATA_Pool
     pool_guid = 0x53f64e2baa9805c9
     pool_context = 0
     pool_failmode = wait
     vdev_guid = 0x125ce3ac57ffb535
     vdev_type = disk
     vdev_path = /dev/dsk/c0t5000C500599DD97Fd0s0
     vdev_devid = id1,sd@n5000c500599dd97f/a
     parent_guid = 0xcf0109972ceae52c
     parent_type = mirror
     zio_err = 5
     zio_offset = 0x1d500000
     zio_size = 0xf1000
     zio_objset = 0x12
     zio_object = 0x0
     zio_level = -2
     zio_blkid = 0x452
     __ttl = 0x1
     __tod = 0x513fa636 0x26750ef1
I know all of these drives are not bad and I have confirmed they are all running the latest firmware and correct sector size, 512 (ashift 9). I am thinking it is some sort of compatibility with this new HBA but have no way of verifying. Anyone have any suggestions?
Edited by: 991704 on Mar 12, 2013 12:45 PM

There must be something small I am missing. We have another system configured nearly the same (same server and HBA, different drives) and it functions. I've gone through the recommended storage practices guide. The only item I have not been able to verify is
"Confirm that your controller honors cache flush commands so that you know your data is safely written, which is important before changing the pool's devices or splitting a mirrored storage pool. This is generally not a problem on Oracle/Sun hardware, but it is good practice to confirm that your hardware's cache flushing setting is enabled."
How can I confirm this? As far as I know these HBAs are simply HBAs. No battery backup. No on-board memory. The 9207 doesn't even offer RAID.
Edited by: 991704 on Mar 15, 2013 12:33 PM

New version of Ovi Suite Available

A new version of Ovi Suite 2 beta has been released today. It's available from betalabs.nokia.com or through the update check in the current beta.
So far it seems a lot faster and more stable.
Nokia N8 on O2-UK
Firmware 022.014

huge file size..
Arpit Goyal

Zen Neoon cant fast forwa

Hi.
I have a Zen Neeon with the latest firmware (.0).
My problem, beside no firmware update for a year, is that i cant fast forward some track. The time meter goes to the beginning but the music keeps playing.
Does anyone can help me?
Best regards,
Miguel Goyanes

My firmware version is .0 [size="" color="#222222">25 May 06 and the tracks are MP3's.

The Race: How fast ist your ThinkPad? AS-SSD-Benchmark with T400s

I am thinking about a new Firmware, because may T400s might be slower than nomal. Would you like to compare and make the test?
New Windows 7, no Updates just installed: 96 Points
Read: 208 mbs
Write 85 mbs
Encrypted with TrueCryt: 56 Points
Encrypted with DiskCryptor: 79 Points
Read: 160 mbs
Write 28 mbs
Download Test AS-SSD-Benchmark: http://alex-is.de/PHP/fusion/downloads.php?cat_id=4&download_id=9
With DiskCryptor:
AS SSD Benchmark 1.6.4237.30508
Name: SAMSUNG MMCRE28G8MXP-0VBL1 ATA Device
Firmware: VBM1EL1Q
Controller: msahci
Offset: 103424 K - OK
Größe: 119,24 GB
Datum: 22.07.2012 21:21:40
Sequentiell:
Lesen: 170,10 MB/s
Schreiben: 49,74 MB/s
4K:
Lesen: 8,92 MB/s
Schreiben: 2,94 MB/s
4K-64Threads:
Lesen: 24,56 MB/s
Schreiben: 2,72 MB/s
Zugriffszeiten:
Lesen: 0,415 ms
Schreiben: 1,241 ms
Score:
Lesen: 50
Schreiben: 11
Gesamt: 85

T430s with Crucial M4-256GB SSD, Win7-64, no encryption.
AS SSD Benchmark 1.6.4237.30508
Name: M4-CT256M4SSD1
Firmware: 000F
Controller: iaStor
Offset: 1536000 K - OK
Size: 238.47 GB
Date: 24-Jul-12 16:45:51
Sequential:
Read: 483.29 MB/s
Write: 269.83 MB/s
4K:
Read: 18.14 MB/s
Write: 40.91 MB/s
4K-64Threads:
Read: 176.67 MB/s
Write: 208.65 MB/s
Access Times:
Read: 0.123 ms
Write: 0.530 ms
Score:
Read: 243
Write: 277
Total: 640
AS SSD Copy-Benchmark 1.6.4237.30508
Name: M4-CT256M4SSD1
Firmware: 000F
Interface: iaStor
Size: 238.47 GB
Date: 24-Jul-12 16:47:13
ISO
Speed:379.17 MB/s
Duration:2.83 s
Prog
Speed:215.36 MB/s
Duration:6.53 s
Game
Speed:291.88 MB/s
Duration:4.73 s
Cheers... Dorian Hausman
X1C2, TPT2, T430s, SL500, X61s, T60p, A21p, 770, 760ED... 5160, 5150... S360/30

Error with a HDD WD5000BEVT-75ZAT0

I got a problem while start up my laptop Studio 1555 and after run a test from DELL Support Center recomend me to buy Iolo System Mechanic and run a test. After perform the test found a lot of problems and aparently fixed, but still a problem on a hard disk remained. Ammong the options to solve the problem were update the firmware, but my warranty already expired. What should I do? Do I need to buy a new HDD? Can I just update the firmware? How?
For more details, this was the report after Hard disk test by Dell Support Center software:
Dell Support Center Log File
Sunday, April 08, 2012 5:34:51 PM
Overall Result: Failed
WDC WD5000BEVT-75ZAT0 ATA Device
Vendor:
Western
Digital
Model Number:
WDC
WD5000BEVT-75ZAT0
Serial Number:
WD-WX70A69R5653
Firmware Revision:
01.01A01
Size:
465.8
GB
Rotation Rate:
5400
RPM
Cache Size:
8
MB
Temperature:
46
C
Physical Sector Size:
512
B
Logical Sector Size:
512
B
Logical Sector Count:
976773168
Supported Standards:
ATA8-ACS,
ATA/ATAPI-7, ATA/ATAPI-6, ATA/ATAPI-5
OS - C:
File System:
NTFS
Volume Serial Number:
2E7C-12A0
Volume Capacity:
100.60
GB
Volume Free Space:
20.63
GB
Volume Used Space:
79.97
GB
DATOS - D:
File System:
NTFS
Volume Serial Number:
5607-3FE0
Volume Capacity:
265.60
GB
Volume Free Space:
75.07
GB
Volume Used Space:
190.53
GB
SMART Status Test
Test Started
4/8/2012 5:11:56 PM
Test Finished:
Passed
4/8/2012 5:11:57
PM
SMART Thresholds Test
Test Started
4/8/2012 5:11:58 PM
Test Finished:
Passed
4/8/2012 5:11:59
PM
Targeted Read Test
Test Started
4/8/2012 5:11:59 PM
Test Finished:
Passed
4/8/2012 5:12:01
PM
Random Seek Test
Test Started
4/8/2012 5:12:01 PM
Test Finished:
Passed
4/8/2012 5:12:56
PM
Funnel Seek Test
Test Started
4/8/2012 5:12:57 PM
Test Finished:
Passed
4/8/2012 5:14:19
PM
Surface Scan Test
Test Started
4/8/2012 5:14:19 PM
Test Finished:
Passed
4/8/2012 5:16:52
PM
Surface Scan Test - 2
Test Started
4/8/2012 5:16:52 PM
Test Finished:
Passed
4/8/2012 5:21:33
PM
SMART Extended Self Test
Test Started
4/8/2012 5:21:33 PM
Error Message:
The device reported the following status: The previous self-test completed
having the read element of the test failed.
4/8/2012 5:32:34 PM
Error Message:
The first failing LBA value is 96056782 and the failure occurred after the
device had been operating for 4352 power-on hours.
4/8/2012 5:32:34 PM
Test Finished:
Failed (Error code: WHD13-1G8)
4/8/2012 5:32:35
PM
SMART Thresholds Test - 2
Test Not Started
4/8/2012 5:11:55
PM
System Summary
Product
Studio
1555
BIOS Version String
A13
Service Tag
<ADMIN NOTE :Service tag removed per privacy policy>
Express Service Code
<ADMIN NOTE :Express Service Code removed per privacy policy>
Operating System
Name
Microsoft
Windows 7 Ultimate Edition (32-bit)
Service Pack
Service
Pack 1
Build Number
7601
DirectX Version
11
Intel(R) Core(TM)2 Duo CPU T6600 @ 2.20GHz (CPU:0)
Name
Intel(R)
Core(TM)2 Duo CPU T6600 @ 2.20GHz
Cores
2
Threads
2
System Memory
Total Physical Memory
4.00
GB
Maximum Supported Memory
8.00
GB
Battery - Microsoft ACPI-Compliant Control Method
Battery
Battery Name
Dell
Type
LION
- Lithium Ion
Battery Serial Number
45173
Hard Drive - WDC WD5000BEVT-75ZAT0 ATA Device
Vendor
Western
Digital
Model Number
WDC
WD5000BEVT-75ZAT0
Serial Number
WD-WX70A69R5653
Marketed Size
500.1
GB

Having the same issue with a WD50000BEVT 500GB drive from 2012 I am preforming a Low Level Format on the drive at this time. The odd thing is with the reported sector count, 1% formatted showed at half the sectors that it should have. At the slow rate of this format it may take a week however it may just reset the drive to be usable again. I am using the free program from HDDGURU.com The paid version it faster however I have time and leave my PC on anyway. I will update to let you know it this did the trick.
There are also free programs that wipe the S.M.A.R.T. errors and drive with embed that also could be a issue. I am cheap and won't give up until the computer does not show the drive at all.
Steven

We want "screen lock" and "world clock"

Come on Apple, lets have the new firmware for our full size colour pods. The screen lock is what the iPods have needed from day one. I was always a bit scared of having phones numbers and addresses in it in case it got stolen.
Please, please, please do the features for us. you know it make sense

I cannot agree with your comments that apple always listen to users suggestions.
For the past three months on this forum people have been asking for a fix to the problem caused by the update released in June this year that stopped your iPod from updating your ratings on the fly. Before you could change a track from say three stars to five and it would move to that Smart playlist automatically without having to be connected to your compute or iTunes.
Now it only works if you are connected to ITunes which of no blooming use at all if you are away on holiday etc.
No, they could have easily rectified or looked into, but instead they stayed silent, and completely bypassed the problem.
I wont by another product from Apple if thats how they treat you. After all, apple made quite a big thing about that feature originally, thats partly why I bought the Ipod over another make, not for its looks.

Zen Neeon - Cant Fast Forward 70min track

Hi, I'm having problems fast forwarding on tracks which are 70min long. Anyone know how to fix this? I downloaded the lastest firmware update this morning (Something.) but it still isnt working.. Thanks?Message Edited by cs0amc on 02-4-200708:36 AM

My firmware version is .0 [size="" color="#222222">25 May 06 and the tracks are MP3's.

Nokia N70-1 Music Edition - Phone Memory

After update the Phone software (firmware), My phone memory sizes show as free memory 18MB and used 524KB. Before that it shows 32MB free memory.
Kindly some body help to update me the Nokia N70 Music edition (Nokia N70-1) model Shared memory size (Phone Memory) and how to rectify the problem also?

Hi ruben213
I don't know which firmware your N70-ME is using at the moment, key in in *#0000# on standby screen. Bear in mind that Nokia Software Updater just reads the "7 digit product code" found on label under battery to determine which software pack to offer, and you the end user has no say in this matter unfortunately. Also if phone was acquired pre-owned than the product code of the device may not necessarily be that shown on label for reasons which can not be elaborated on this manufacturer's sponsored forum.
Happy to have helped forum in a small way with a Support Ratio = 37.0

E4200 - USB Storage limit of 2TB

Does anyone know if Linksys will be increasing the size limitation of the E4200 USB storage devices?
Will the next firmware allow larger drive sizes?
I only bought the thing to share via the router my digital content that is stored on an 8TB external device.
What is the perpose to the limit in the first place? Is this a hardware or software limitation of the device?
Any answers would be appreciated. I love the router, I just hate limitations...go figure.
Thanks.
~:TLH:~

What is the firmware version on the router? As there is a new release of the firmware which adds the supports of 3TB Hard drive with NTFS and HFS+ format.
As well as here is the list of tested USB storage devices for the Linksys E4200
http://www6.nohold.net/Cisco2/ukp.aspx?pid=93&login=1&vw=1&app=search&articleid=22738&userrole=Links...

Firmware size

i want to reinstall firmware on my nokia 500 because internet in not working in it !!!
what would be the size of this file for re install
first i have updated my mobile with the size of 314 mb
should it will take this much mb's or less !!!!
please give me kudos if u like my post
Solved!
Go to Solution.

it will be the same size as the first time

Size of the Nokia firmware update Version: 4.07...

What is the size of the new firmware Version:4.0736.3.2.1 available for Nokia N73 ME ?
Please Reply....

I see....Well to tell you the truth, i left it alone and went about my business and when i got back the filesize was almost 2gb....then left it alone again and finally it said 1 sec time remaining for almost 5mins...I got **bleep** and pulled the plug...The phone still works fine but the battery wasnt being charged via usb. The usb icon in the phone was visible and I assumed it was connected. What could be the problem apart from the firewall.....Damneth!

Change firmware from HPG8 to SN06 of Hdd ST31000340NS (Part number:9CA158-784) size 1tb

Hi all,
Could anyone please help to provide procedure to change firmware from HPG8 to SN06 of Hdd ST31000340NS (Part number:9CA158-784). My controller LSI 3ware 9650SE support SN06 firmware.I am facing raid degraded issue.
Is it recommaded by HP to change firmware if we have any HDD failure.
Thanks,
Amit

Hello Xenpus,
Welcome to the HP Forums!
I understand the computer has a RAID degrading issue. I think that updating the BIOS is a good starting place. But based on what you told me, it seems like there is a hardware issue. If you cannot fix it, I would contact HP phone support for hardware assistance. You can utilize this website to learn how to contact HP appropriately, based on your region: Contact HP Worldwide
Mario
I worked on behalf of HP.

Firmware 1.1.1 size?

Similar Messages

Maybe you are looking for