Firmware 1.1.3 fixes Yahoo! delayed push and dissapearing sent emails!!!
Wow! It's finally happened and I hardly believe it. Since 1.1.3 I can 100% confirm that Yahoo! push has been working perfectly with messages arriving insanely fast, faster than ever before. But, even better than that, the annoying bug of having emails make the noise/icon that they were sent but just dissapear is ALSO FIXED!!! Since I put 1.1.3 I've sent over 100 emails on my iPhone using both WiFi/EDGE and every single one has gone through perfectly.
Thank god this is fixed and I can finally start using the email on my iPhone as I originally intended too. Hallelujah!!!
I seem to be getting the opposite results. Before 1.1.3 my Yahoo was working pretty reliably and the messages were getting pushed. Ever since the upgrade to 1.1.3, however, I have not been getting my messages pushed to me consistently. I tried deleting and re-adding the Yahoo account and, at first, it worked but now I'm back to not getting them again.
Similar Messages
-
I have problems HELP My 4 mails went over 17GB. I proceeded to cancel in my iphone the 4 accounts(yahoo, gmail ,icloud and the business email) and nothing, I am in the same 17GB.
I wouldn't worry. Assuming you haven't hacked the phone you cannot have installed any viruses or spyware just by clicking a link in an email. Sounds like the page you accessed could not be read on the phone anyway, or it was just a dead link.
-
Yahoo Mail push problem with stock email app
It is nice to see that Verizon is offering push services for yahoo mail (and possibly for others as well, I only tried yahoo) on select phones now, the Droid Charge being one of them. If you add a yahoo account in the stock email app, it configures it through "Verizon email gateway server" and the messages will be pushed to the phone just like gmail had been, and you will get your new messages almost instantaneously.
I previously had an htc incredible and that phone did not have that feature. My e-mails were being checked at an interval that I could select, but not pushed.
What this email gateway does is (as I understand it): 1) your phone sends your credentials to the gateway server where they are stored, 2) the server connects to yahoo mail servers with your credentials, and 3) whenever there is a new message, the gateway server retrieves and pushes it to your phone, in other words it pretty much acts as the middle man that has a notification capability. The gateway server only accesses your inbox folder and it only does incoming services. For other things such as sending messages or checking other folders, your phone connects to yahoo mail servers directly. My incredible on the other hand used to connect to yahoo mail servers directly for everything including inbox access and unfortunately those servers do not have the push capability to mobile devices.
I got the Charge over two weeks ago and enjoyed push on yahoo for about ten days. But then suddenly it stopped working. It would no longer update my inbox even when I selected refresh through the menu. If I went into other folders, they would update and I could send emails. However, my inbox would not update. I waited a day, then I went into settings/apps/manage apps and deleted the cache and data of the mail application to fix a possible glitch. (It works on the market app when all of your downloaded apps disappear from the list every once in a while due to a glitch)
I ended up with a blank inbox that couldn't download any of the messages. Then I removed the yahoo account and tried to readd. Now I get the "Fetching mailbox failed, retrying. . ." error and sometimes it retries for up to a half hour (until I manually stop it) or sometimes it says "Unable to connect to server" after a couple of minutes.
Following is a list of things I tried:
1) Set up a different Yahoo account:
Works without a glitch, push enabled
2) Try the original email account with wrong password:
Gives a credential error, so password authentication is not the problem
3) Manual configuration through selecting "Others" rather than "Yahoo Mail" in the add account menu:
Unchecking "Use Verizon email gateway" makes it work, but without push. My phone is able to connect to Yahoo servers directly with the same exact settings
I am pretty sure the problem is with the Verizon gateway server having a glitch with my email account. So someone in charge of that server has to go through the list of accounts set up and either reset or delete mine, so I can set it up again through my phone.
I called Verizon support the other day and finally talked to a level 2 rep after having to do the restart, take battery out and all that nonsense. It took them a while to understand the actual situation. It's not their fault really, my problem is complicated and a level 2 rep simply does not have that kind of knowledge. They tried to connect me to Samsung representatives, which was a waste of time, because there is nothing wrong with the hardware as it works with a different yahoo account with no problems, and it also works when connecting to yahoo directly. After spending two and a half hours on the phone, and after the rep talked to her supervisor and the samsung reps to learn more about the verizon gateway server, she finally told me I was right about the issue, and assured me that they would fix it and call me within two hours.
It has been two days, I haven't heard a thing.
What frustrates me is that there wasn't a single person there who could even grasp what could be causing the issue. They had never heard about the email gateway, I had to explain to them. I am not mad that the level 2 rep or her supervisor didn't know, but I am pretty **bleep** that they could not put me in touch with a person who did.
I know there is at least one person at Verizon who manages the gateway server, but the question is how can anyone contact him???
Verizon keeps offering these new services that are really cool for the most part, but their support system is very disconnected from their engineers/technical staff. The customer service is unable to fix problems other than billing issues, and their answer for everything else is to "take the battery out and restart the phone".
For now, I set up my account manually, without the Verizon email gateway, so I don't have "push" working. It's a shame because it is such an easy thing to fix only if I could get in touch with the right person.UPDATE:
After waiting for about ten days, I tried setting up my e-mail the regular way (by selecting yahoo mail) again yesterday. To my surprise, it went through without a glitch. I guess the cache of the gateway server must have been reset.
I have been enjoying push for yahoo mail for the last 24 hours again. But I just noticed now, that the problems might be starting again. There are recent e-mails that don't show up on my phone, but do through yahoo's web mail page. When I select "refresh" through the menu on the phone, I see the circle in the top corner spinning for as long as I wait, but the e-mails don't get downloaded. That is exactly how my problems had started in the first place. I will give it the benefit of the doubt and wait and hope that it fixes itself.
There might be a compatibility problem with yahoo servers and the verizon email gateway because I have two gmail accounts set up with the stock e-mail the same way, both using verizon's gateway server for push, and they have both been working with no problems for almost a month. (Even though sometimes the "push" is delayed by up to 5-10 min, most of the time it is within a couple of minutes and that's fine, I'm not that picky) And when I do "refresh", ti only takes a few seconds to complete the request.
And I still haven't heard anything from Verizon. -
FIXED: Yahoo Push Notifications for Multiple Accounts on ICS - Working
I have a Razr Maxx that I manually updated to ICS the day the OTA was available.
I had previously set up a couple of Yahoo/AT&T accounts and Gmail and they were working just fine.
Gmail continued to work but I stopped receiving push notifications from Yahoo/AT&T.
I found this post: https://community.verizonwireless.com/thread/772698
There was no way I was going to do a hard reset as a first option. Nor did I want to delete and re-enter all the account information for all the accounts. So I decided the easiest, first step would be to try the "clear the cache" "Alternate method".
Step 4 states "Press Volume Down to select Recovery then press Volume Up". However, every other step states to "press Power button" to select. I pressed "Power button" instead of pushing the volume up to select.
Upon complete restart I got notifications on all my Yahoo/AT&T accounts.
Hope this helps.I've had Yahoo since my iPhone 3G and the push notification has consistently been flaky so this is nothing new for me. You can contact Yahoo via their website, submit a troubleshooting request, and they will look into it.
As an anecdote, my iCloud and Gmail (Google Apps) accounts have been consistently more reliable than Yahoo for push notification. If Push is a primary concern, you might look into getting a free iCloud account (no ads!). -
Yahoo! push option not showing
Hi,
for about a week now I haven't been able to get push notifications from my Yahoo! mail account on my iPhone (5, running iOS 6.1).
This morning I decided to delete the account from my iPhone and configure it again, and I still couldn't get push notifications.
I went into Settings > Mail, Contacts, Calendars > Fetch New Data (push is ON) > Advanced > My Yahoo! Account, and here I don't even have the "Push" option anymore, only "Fetch" and "Manual".
Anyone has any idea why, and what I can do to fix it?
PS : my Gmail account is configured on my iPhone as well, and push notifications work perfectly.I am having the same problem. Works just fine on my iPad. Hopefully someone can shed some light on it and help us out.
-
Whenever I put my earphones into my iPod Touch 2g the music isn't clear and I have to push and hold them in order to hear the song normally. It isn't the earphones because I tried another pair, that worked fine, and there was still no difference. I also use the same pair of earphones in my laptop and it sounds great. Is there a way to fix this problem without having to buy a brand new iPod touch? Do I need to clean it or something? And if so, how would I go about doing that? Thanks!
- Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so.
If still problem that indicates you have a bad headphone jack.
Apple will exchange your iPod for a refurbished one for this price. They do not fix yours. Likely not worth it for your old 2G iPod
Apple - iPod Repair price
A third-party place like the following will replace the jack for less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the jack yourself
iPod Touch Repair – iFixit -
How to fix the delay problem while recording? Can't set the Latency to 0. Win7, CS6,Realtek,C03u Mic
I am using Win7, with CS6, Realtek soundcard and Samson C03U microphone.
There is a problem that's really been bothering me. When I record songs the recorded audio always comes 0.1 seconds after where it's supposed to be and I need to fix the problem every time. How to fix the delay problem while recording? I can't set the Latency to zero. The minimum is 30ms and I still get an obvious delay.
I saw some previous discussions saying that installing ASIO would help. Is it gonna work on my PC?
Thank you in advance guys.You probably should look at a more 'serious' audio interface rather than the Realtek
Yes ASIO drivers are the way to go
If you want zero latency you need to monitor via your audio hardware (hence the 'serious' audio interface suggestion)
There are a heap of reasonable audio interfaces which will do the job for you that are pretty inexpensive and I'm sure that someone will jump in with a suggestion -
Yahoo! Push Mail stopped working (does not Push anymore!)
Hey,
I have my iPhone 3G for about a month now. And before you ask, I did not Jailbreak it or whatsoever.
Push Mail via Yahoo! worked fine for me for about 2 weeks and after than eMails stopped getting pushed to my device. I tried deleting and re-adding my account, but still, nothing gets Pushed.
I checked all my settings and they are all fine (afterall why should they not be, I never changed anything in the first place!), everything is set to "Push".
This is really annoying me, because I wont get my eMails unless I go into the Mail App and press the "Refresh" button.Same here, was working fine until a couple of weeks ago and then stopped. Only updates now when in the Mail App.
Ad -
my yahoo is not pushing. i have to go in the email app to get my emails. it doesnt show a number on the app. on my itouch it pushes and shows a number.
Do you have the account setup to be pushed? Look in your settings>mail,contacts,cal and look if the fetch is set to push on the account, if its not, its not supported, you'll have to setup the account in the same nature as the itouch.
-
internet explorer works ok
UPDATE:
After waiting for about ten days, I tried setting up my e-mail the regular way (by selecting yahoo mail) again yesterday. To my surprise, it went through without a glitch. I guess the cache of the gateway server must have been reset.
I have been enjoying push for yahoo mail for the last 24 hours again. But I just noticed now, that the problems might be starting again. There are recent e-mails that don't show up on my phone, but do through yahoo's web mail page. When I select "refresh" through the menu on the phone, I see the circle in the top corner spinning for as long as I wait, but the e-mails don't get downloaded. That is exactly how my problems had started in the first place. I will give it the benefit of the doubt and wait and hope that it fixes itself.
There might be a compatibility problem with yahoo servers and the verizon email gateway because I have two gmail accounts set up with the stock e-mail the same way, both using verizon's gateway server for push, and they have both been working with no problems for almost a month. (Even though sometimes the "push" is delayed by up to 5-10 min, most of the time it is within a couple of minutes and that's fine, I'm not that picky) And when I do "refresh", ti only takes a few seconds to complete the request.
And I still haven't heard anything from Verizon. -
Solution for "Firmware problem" Zen Touch with Media Player 11 and Windows XP
Hello,?I like to share this information about my troubles with updating my Zen Touch. At first my Media Player would not detect my Zen Touch. As I hoped the update of the firmware would solve my problem I started a firmware update. Unfortunatly it went wrong as a result the Zen unit did not boot anymore an gave a "Firmware problem". Due to this problem I could not reinstall the firmware as Windows XP did not detect my Zen. I was ready to trow the unit out of the window when I found this solution. And it really worked for me. I hope it wil solve your problems too. And many thanks to DG?http://answers.yahoo.com/question/in...6280245AAiPliB?Best Answer - Chosen by Asker
I had the same problem. You don't have to call Creative. You don't have to spend any money. Here's how I fixed it:
1. If you have Windows Media Player uninstall it and reboot
2. Uninstall the WMP Runtime format from add/remove programs ( you may have to check the "show updates" box) and reboot
3. With the Zen Touch connected, go to Device Manager and uninstall it and then unplug the USB cable.
4. Uninstall ALL Creative software including the Zen drivers and then Reboot
5. From Device Manager, uninstall ALL USB root hubs and reboot
6. Plug in the Zen and wait for windows to detect it. In my case windows showed it as "Creative Zen" and then changed it to "MTP Device."
7. Run the firmware update again. It should go ahead and update now.
You can reinstall WMP if you want after this. Be sure to get the latest version from microsoft's website.
Hope this hel
ps.Thanks for sharing this with us!
-
I have an iphone4 (Verizon) and an iPad (AT&T), and starting this morning, neither one is receiving my mail from Yahoo. I can send an email from Yahoo on both devices, but I can't see any messages. It's clear that both devices know how many messages are in my inbox and how many are unread (I get a "Load More Messages" notice. Any ideas on how this can be fixed? After reading thru some discussions, it looks like the new operating system may be to blame. I only updated in the last few days... Help!
Yahoo's mail service is notoriously buggy. It's not your phone or your device.
-
cannot send or receive yahoo mail or gmail from iPhone . installed ios 6 recently. tried rebooting the phone and deleting the email account and adding again but nothing works ! can someone suggest a solution?
Not sure about yahoo, but for gmail, I done the following:
Set up using Exchange on iPhone, it'll keep prompting for password. On PC use captcha option, log in to gmail account from PC after completingg captcha option, enter password on iPhone.
See how that goes for gmail, let us know.
Hopefully someone will have fix for yahoo. -
After reading and resetting everything with Keyboard I still get blank white screen on 2nd? page of boot. The only way I can boot to Mavericks is unplug power cord, push and hold power button while plugging power cord in. Fans run at full speed, machine boots then runs normal except the dvdrw will not . The mid 2011 IMAC had the same problem with LION. I changed hard drives, formatted, and installed a clean install of latest os x mavericks. Any help would be greatly appreciated.
EtreCheck version: 1.9.15 (52)
Report generated August 30, 2014 at 6:56:41 PM EDT
Hardware Information: ?
iMac (21.5-inch, Mid 2011) (Verified)
iMac - model: iMac12,1
1 2.5 GHz Intel Core i5 CPU: 4 cores
4 GB RAM
Video Information: ?
AMD Radeon HD 6750M - VRAM: 512 MB
iMac 1920 x 1080
System Software: ?
OS X 10.9.4 (13E28) - Uptime: 0 days 0:16:53
Disk Information: ?
ST3120026AS disk0 : (120.03 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted>: 209.7 MB
Untitled (disk0s2) / [Startup]: 119.17 GB (87.12 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
HL-DT-STDVDRW GA32N
USB Information: ?
Apple Inc. FaceTime HD Camera (Built-in)
CHICONY USB NetVista Full Width Keyboard
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Computer, Inc. IR Receiver
Apple Internal Memory Card Reader
Thunderbolt Information: ?
Apple Inc. thunderbolt_bus
Gatekeeper: ?
Anywhere
Kernel Extensions: ?
[loaded] com.nvidia.CUDA (1.1.0) Support
[loaded] com.sophos.kext.sav (9.0.61 - SDK 10.7) Support
[loaded] com.sophos.nke.swi (9.0.53 - SDK 10.8) Support
Startup Items: ?
CUDA: Path: /System/Library/StartupItems/CUDA
FanControlDaemon: Path: /Library/StartupItems/FanControlDaemon
Launch Daemons: ?
[loaded] com.adobe.fpsaud.plist Support
[running] com.arcsoft.eservutil.plist Support
[running] com.bjango.istatmenusdaemon.plist Support
[loaded] com.oracle.java.Helper-Tool.plist Support
[running] com.sophos.autoupdate.plist Support
[running] com.sophos.configuration.plist Support
[running] com.sophos.intercheck.plist Support
[running] com.sophos.notification.plist Support
[running] com.sophos.scan.plist Support
[running] com.sophos.sxld.plist Support
[running] com.sophos.webd.plist Support
Launch Agents: ?
[running] com.arcsoft.esinter.plist Support
[running] com.bjango.istatmenusagent.plist Support
[loaded] com.nvidia.CUDASoftwareUpdate.plist Support
[loaded] com.oracle.java.Java-Updater.plist Support
[running] com.sophos.uiserver.plist Support
User Login Items: ?
Macs Fan Control
Firefox
Internet Plug-ins: ?
FlashPlayer-10.6: Version: 14.0.0.176 - SDK 10.6 Support
Flash Player: Version: 14.0.0.176 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.3
JavaAppletPlugin: Version: Java 7 Update 67 Check version
Default Browser: Version: 537 - SDK 10.9
Audio Plug-ins: ?
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins: ?
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes: ?
CUDA Preferences Support
Fan Control Support
Flash Player Support
Java Support
Time Machine: ?
Time Machine not configured!
Top Processes by CPU: ?
1% WindowServer
1% fontd
0% firefox
0% SystemUIServer
0% SophosWebIntelligence
Top Processes by Memory: ?
229 MB firefox
156 MB SophosScanD
152 MB InterCheck
131 MB com.apple.IconServicesAgent
115 MB SophosAntiVirus
Virtual Memory Information: ?
424 MB Free RAM
1.53 GB Active RAM
1.37 GB Inactive RAM
699 MB Wired RAM
1.26 GB Page-ins
0 B Page-outsI'd start by getting rid of the following software responsible for these extensions.
Kernel Extensions: ?
[loaded] com.nvidia.CUDA (1.1.0) Support
[loaded] com.sophos.kext.sav (9.0.61 - SDK 10.7) Support
[loaded] com.sophos.nke.swi (9.0.53 - SDK 10.8) Support
Startup Items: ?
CUDA: Path: /System/Library/StartupItems/CUDA
FanControlDaemon: Path: /Library/StartupItems/FanControlDaemon
Use the uninstaller provided with the Sophos software. You can uninstall CUDA via the preference pane. Be sure you remove the com.nvidia.CUDA extension which is located in the /System/Library/Extensions/ folder. Not sure if Fan Control has an uninstaller so you will have to do it manually:
Uninstalling Software: The Basics
Most OS X applications are completely self-contained "packages" that can be uninstalled by simply dragging the application to the Trash. Applications may create preference files that are stored in the /Home/Library/Preferences/ folder. Although they do nothing once you delete the associated application, they do take up some disk space. If you want you can look for them in the above location and delete them, too.
Some applications may install an uninstaller program that can be used to remove the application. In some cases the uninstaller may be part of the application's installer, and is invoked by clicking on a Customize button that will appear during the install process.
Some applications may install components in the /Home/Library/Applications Support/ folder. You can also check there to see if the application has created a folder. You can also delete the folder that's in the Applications Support folder. Again, they don't do anything but take up disk space once the application is trashed.
Some applications may install a startupitem or a Log In item. Startupitems are usually installed in the /Library/StartupItems/ folder and less often in the /Home/Library/StartupItems/ folder. Log In Items are set in the Accounts preferences. Open System Preferences, click on the Accounts icon, then click on the LogIn Items tab. Locate the item in the list for the application you want to remove and click on the "-" button to delete it from the list.
Some software use startup daemons or agents that are a new feature of the OS. Look for them in /Library/LaunchAgents/ and /Library/LaunchDaemons/ or in /Home/Library/LaunchAgents/.
If an application installs any other files the best way to track them down is to do a Finder search using the application name or the developer name as the search term. Unfortunately Spotlight will not look in certain folders by default. You can modify Spotlight's behavior or use a third-party search utility, EasyFind, instead.
Some applications install a receipt in the /Library/Receipts/ folder. Usually with the same name as the program or the developer. The item generally has a ".pkg" extension. Be sure you also delete this item as some programs use it to determine if it's already installed.
There are many utilities that can uninstall applications. Here is a selection:
1. AppZapper
2. AppDelete
3. Automaton
4. Hazel
5. AppCleaner
6. CleanApp
7. iTrash
8. Amnesia
9. Uninstaller
10. Spring Cleaning
For more information visit The XLab FAQs and read the FAQ on removing software.
Be sure to remove your two Login Items. Finally do this:
Reinstall Lion, Mountain Lion, or Mavericks without erasing drive
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu.
Reinstall Lion, Mountain Lion, or Mavericks
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless. -
Remove push and sms notifications during a call
it is possible to remove audio (push and sms notifications) during a call?
if not, fix it!!!!Sorry but there isn't any options for what you are asking.
http://apple.com/feedback if you care to suggest it.
Maybe you are looking for
-
How can I upgrade from OSX 10.7 to 10.9 on my 2012 mac mini? (2.3 GHz, 4 GB, 500 GB SATA disk) I don't want OSX Yosemite.
-
Hi, I have configured XI to call SOAP axis web service - using SOAP adapter. But the response message from the web service contains multiref. Which looks like this (tested using soapui) :: <soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/s
-
Mount Points in Application Servers
Hi , I am planning to install ECC ISU , EP and BI in production environment. ECC & BI are On AIX and DB2 EP is on Linux and DB2 We will have two application servers for all systems ( ECC, BI and EP). Can anyone please let me know , what are the sap
-
Although in my System information it lists my Mac as running OS X 10.9.5, it was not the case. My system was running browsers in an older version. When I asked for support, I was pointed to Recommended Articles about updating and installing software
-
Hello, does anybody knows, how to change measuring units from inch to cm in LifeCycle Designer? Thanks a lot.