Firmware bug: $CCERT must not be used in Report_Rule

Prolog
"Report Rule" can be configured with URL's used to save phone's current configuration. Starting with 7.5.2b firmware it is possible to configure more than one URL here. The semi-colon has been used as separator. It caused issues because semi-colon can be used in casual URL, so the separator has been changed to space in 7.5.5 (see Bug in Report_Rule parsing (SPA50x, fw 7.5.x) for more)
As of 7.5.7 firmware, the 2048 certificates has been introduced and value of $CCERT variable may contain text "Installed (2048 bits)". It cause other issue related to Report Rule parsing.
Issue & how to repeat
$CCERT can be used on "Report Rule" no longer because of wrong parsing order.
The author of firmware first call variable expansion for complete "Report Rule" string, then split the result by space in attempt to found second URL.
With Report Rule configured to https://test.local/Report.php?Product=$PN&CERT=$CCERT it is parsed to:
first_rule is https://test.local/Cisco/Report.php?Product=SPA508G&CERT=Installed, second_rule is (2048 bits)
It is wrong result. In advance, it reveal the characters inserted into URL by variable expansion are not escaped properly.
How to fix
The order of parsing steps needs to be reversed. Report Rule need to be split  into parts first, then variable expansion should be called for both parts independently. Also, strings expanded from variables should be url-encoded properly.
Disclaimer
I will not call SMB support to report this bug to them. Assuming the Cisco is interested to repair firmware bugs a staff member monitoring this forum will create ticked by self. I wish that all relevant information including the depth-in analysis has been disclosed here. I'm ready to provide further details or create test environment if necessary. I'm just not willing to call the Support center as I'm not willing to explain all those complex things described here by phone (and they doesn't accept written reports).
For those non-Cisco-staff users affected by issue - feel free to report the issue to Support center, if you are willing to do it. You are allowed to use information disclosed here, or just refer to this report. I don't care the authorship.

Post Author: CompositeID
CA Forum: .NET
You are not alone on this one, I am having the very same issue as you are and . Everything functioned just fine the last time the application was deployed was deployed and there was nothing changed to any of the reports or code which handles the reports; however, this time I am having the same issue.  I added the parameters to the report to check to see if they were actually being recognized by the report and they do show up, but it refuses to filter the records and brings back every record.  The report works properly if I run it just directly in Crystal though.  I sure hope someone can enlighten us Paul.
Update: Well, I finally figured out what was causing my issue.  The issue had to deal with the actual older version of the CrystalReportViewer control and the newer version supplied by the update.  I had suspected it was something minor that I had overlooked when doing the update.  Hope this gets you going as well.  Cheers

Similar Messages

  • QueryFilter on xLongText (CLOB) is not comparable & must not be used with =

    Hi,
    Im encountering an error creating a queryFilter on xLongText field.
    May I know how should I go about doing a search on fields that are declared as xLongText?
    Thanks
    Error encountered:
    com.sap.sql.sqlparser.CommonSQLParserException: - 1:2495 - type check error: the expression >>"ALIAS_1"."SEARCHPROBLEM"<< (CLOB) is not comparable and must not be used with "="
    Code:
    filters.add(QueryFilterFactory.createFilter("searchProblem", Condition.EQ, (search.length()==0?"*":search.toLowerCase())));

    I found the same problem, the way I found round it was to do a find all service (or a by elements find to bring a subset of records back but not filtering on the longText). Then iterate over the results of this in Java and do a string 'contains' method call on the long field as by then it is of type string. If it does contain the filtered string add it to your result.
    If there are many records this could become quite a slow service.

  • HT201407 I am trying to restore my ipod to remove a lot of bugs and delete not very useful information on it. its been stuck at the apple logo reboot screen for roughly 13 hours. what do i do to fix this? (im restoring it right now as i typed this)

    I dont know what to do anymore. i feel like my ipod will be stuck forever

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • Firmware bug: CPU1 tried to use APIC500

    Every time I want to use the computer (HP Compaq  6005 Pro small form factor) I have to switch it on and then push the reset button after booting up to a black screen.
    I once got :
    Firmware bug: CPU1 tried to use APIC500 (LVT offset0) for vector 0x400 but the register is already in use for vector 0xf9 on another CPU.
    Any ideas?
    Is Linux reporting a real firmware fault or is it wrong?

    Hello anonio-mouse,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I understand you are getting the [Firmware Bug]: cpu 1, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu. I have looked on the Ubuntu site and under the Bugs section I found the bug [Firmware Bug]: cpu 1, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is alrea... so it looks to be a geniune error and is being addressed on the Ubuntu site.
    I hope I have answered your question to your satisfaction. Thank you for posting on the HP Forums. Enjoy your weekend!
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

  • I've reset my PPAM before to get around Firmware lock, but I've upgraded to mountain lion and now need to do the same thing, but I can't reset the PRAM. I've heard of the chip that is on the post 2011 macs, but I must not have one? What to do?

    I've reset my PPAM before to get around Firmware lock, but I've upgraded to mountain lion and now need to do the same thing, but I can't reset the PRAM. I've heard of the chip that is on the post 2011 macs, but I must not have one? What to do? Also, I can not get start up chimes unless I have the factory startup disk in. Can the PRAM be reset with the factory startup disk in or must the mac boot from the hard drive? Need help.

    Help for forgotten passcode >   iOS: Forgotten passcode or device disabled after entering wrong passcode
    When you have access to your iPhone again, FaceTime is a pre installed app that cannot be removed.
    Try a search >  iOS: Understanding Spotlight Search

  • HT201210 could not be updated because of the firmware file is not compatible (how to resolve this problem or ios 6 could not be used on iphone4?)

    could not be updated because of the firmware file is not compatible (how to resolve this problem or ios 6 could not be used on iphone4?)

    Do you have iTunes 10.6.3?
    If not, update iTunes first then try again.

  • Activity log for bug 278860: confusing "profile in use"/"already running" error when profile is missing (not found) did anyone find a fix for this? Thanks, Edie

    bug 278860: confusing "profile in use"/"already running" error when profile is missing (not found)
    Apparently the profile .default is missing. Therefore the bug 278860 is activated and I can't start Firefox. Is there a solution?

    I did some googling and found alot of topics from you on this issue, to me it simply seems like on of the connectors is broken or loose.

  • Apple ID password must not have been used in the past year

    Hello
    I am trying to reset my Apple password. I have been sent a link by Apple which I have clicked. When I enter a completely new and never used password in the system (which meets all the other requirements) it says this password must not have been used in the previous year. As a completely new password, it obviously hasn't and yet the system says it has. I have tried this with three completely new passwords but the same thing comes up.
    Any suggestions please for how to get out of this loop?
    thank you

    Thanks to all who responded. You are all absolutely correct. However, this Ipad was a gift to my wife who was dying of cancer in the hospital and wanted some entertainment. So I started it out with her Apple ID. After she passed away I moved from Sacramento to Austin and eventually proceeded to get the Apple ID changed from my wife's to mine. Meanwhile when she was in the hospital I opened an Itunes account in my name to buy movies for her. That was the first mistake.
    Then during the move to Austin I lost track of the IPAD and later found it and tried to use support but could not remember the proper ID. Later the folks at the Apple store helped me create a new and novel Apple ID that was unfortunately unlike any other.
    The botom line is that I am stuck with three Apple IDs and three passwords. I am told by Apple there is nothing they can do about this as IDs cannot be changed or destroyed. I can quit using them or start a new account but when I try to do that the system keeps remembering too many things from the past and resists.
    Even if I sold this Ipad and bought a new one, the system memory is still there.
    I think the real problem is that destop and laptop computers are totally owned by an individual and that individual can control logins and passwords to his liking. IPADs and similar Apple products are different in that the corporation has built in their own intrusion detection schemes because of the relation to Itunes.
    One thing I thought about is to open a new Itunes account pretendding to be a new customer with my regular Apple ID. Perhaps I could do the same with Apple Support.
    Thanks for your comments.
    RAZ

  • My mac powers off when not in use and I must unplug to restart.

    My Mac powers of after not being used for a period of time.  I must unplug to restart.

    All ATVs go into sleep mode when not in use.
    Simply pressing the power button on the remote should wake the device up, is that not occurring?

  • RV220W PPTP Start IP Address must not be in the subnet of LAN:192.168.1.1/255.255.255.0

    Hello,
    I start setup of new RV220W Wireless router.
    I want to provide access to internal network via PPTP.
    But gettting error 'PPTP Start IP Address must not be in the subnet of LAN:192.168.1.1/255.255.255.0'.
    I reviewed the forum and some user's says what they can fix this issue, but I cannot found the way how to do it.
    Details of router:
    Firmware Version
    1.0.4.17
    LAN (Local Network) Configuration
    IP Address
    (xxx.xxx.xxx.xxx)
    Subnet Mask
    (xxx.xxx.xxx.xxx)
    DHCP
    DHCP Mode
                                     None                                 DHCP Server                                 DHCP Relay                                
    Domain Name
    Starting IP Address
    (xxx.xxx.xxx.xxx)
    Ending IP Address
    (xxx.xxx.xxx.xxx)
    Primary DNS Server
    (Optional)
    Secondary DNS Server
    (Optional)
    Lease Time
    Hours (Range : 1 - 262800, Default : 24)
    Remote DHCP Server
    LAN (Local Network) Proxy
    DNS Proxy
    Enable
    VLAN
    Enable
    Create VLANs and assign the Outgoing Frame Type.
    Up to Fifteen new VLANs can be created. VLAN IDs must be in the range (2 - 4093)
    VLAN Membership Table
    VLAN ID
    Description
    Inter VLAN Routing
    Device Management
    Port 1
    Port 2
    Port 3
    Port 4
    1
    Default
    Enabled
    Enabled
    Untagged
    Untagged
    Untagged
    Untagged
    Multiple VLAN Subnet Table
    VLAN ID
    IP Address
    Subnet Mask
    DHCP Mode
    DNS Proxy Status
    1
    192.168.1.1
    255.255.255.0
    DHCP Server
    Enabled
    VPN Users
    PPTP Server Configuration
    PPTP Server
    Enable
    Starting IP Address
    (xxx.xxx.xxx.xxx)
    PPTP Start IP Address must not be in the subnet of LAN:192.168.1.1/255.255.255.0
    Ending IP Address
    (xxx.xxx.xxx.xxx)
    VPN Client Setting Table
    No.
    Enabled
    Username
    Password
    Allow User to Change Password
    Protocol
    0 results found
    All settings after reset to factory settings.
    How I can enable assigning the IPs from LAN network to the PPTP Server?
    Thank you!

    Hi,
    This is a change done explicitely starting firmware 1.0.4.17. It is not a bug. This appears to be by design. PPTP peer networks are now treated as a routed subnet. It is unlikely that this will be changed.
    But nevertheless there is a workaround to configure the PPTP range in the same subnet as your LAN:
    1. Configure LAN IP subnet different from what you will use, for example 192.168.2.0/24
    2. Configure DHCP pool for PPTP client as needed for example 192.168.1.100-192.168.1.110
    3. Go back to LAN interface and change LAN IP to desired one: 192.168.1.0/24 and pool 192.168.1.2-192.168.1.99
    4. This way there will be no error on GUI 
    5. PPTP client will receive IP address from the same subnet as LAN interface of the RV220W
    Regards,
    Kremena

  • WRT120N Latest firmware BUG & PATCH

    Hello,
    I just bought a WRT120N Wireless Access Point. I upgraded its firmware to the latest available (v1.0.04) but there is a BUG in the "Applications & Gaming" section. In particular, in the "Single Port Forwarding": two applications with the same internal port, even with different IP addresses, can be added and the error message is "Port Number is duplicate.".
    This behavior is incorrect and can be explained with an example: let us assume we have two web server behind the NAT. Both are listening on the default port 80/tcp and have address 192.168.1.2 and 192.168.1.3. It is possible to forward the data received by the router on port 80/tcp to the web server 192.168.1.2 and the data received by the router on port 8080/tcp to the web server 192.168.1.3. This is allowed because everything is unique: if the router receive a packet on port 80/tcp it have to rewrite the destination IP address and insert 192.168.1.2 while if it receive a packet on port 8080/tcp it have to rewrite the destination IP address and tcp port (192.168.1.3 and 80). It is irrelevant that final port destination is the same. Of course, it is important that the two rules have a different external port: otherwise the router could not distinguish between them but the internal port is irrelevant (as long as two rules are not identical).
    The BUG is circumscribed in the JavaScript since I tried to "nop" the wrong check with Firefox/Firebug and the rules are correctly memorized in the configuration and they works without issues.
    I Fixed the JavaScript and, in the following, there is the patch. Actually, this patch does not solve another minor BUG: theoretically it is possible to redirect two different external ports to the same couple internal IP/port. The solution is trivial too, but this would require rewrite a larger portion of code, so I decided to not fix this minor BUG because it is less severe and the scenario is less common.
    This BUG seems tightly related to http://forums.linksysbycisco.com/linksys/board/message?board.id=Wireless_Routers&message.id=85768&query.id=245618#M85768 but that one is on another router/firmware (that I do not own) so I do not know if this patch apply to that BUG too.
    Please let me know if you need further informations
    Marco Papa Manzillo
    ----------- Patch -------------
     diff -ur 192.168.167.1 2/index.htm 192.168.167.1/index.htm
    --- 192.168.167.1 2/index.htm   2010-01-05 13:39:59.000000000 +0100
    +++ 192.168.167.1/index.htm     2010-01-05 14:32:00.000000000 +0100
    @@ -535,9 +535,10 @@
     var fNameHead = "gport_external";
     var fNameTail = "gport_internal";
    +var fNameIP   = "private_ip4_";
     var applicationName = "application";
     var appname = "";
    -var i, rs, rs2, j, index, numProtocol, temp;
    +var i, rs, rs2, j, index, numProtocol, ipv4_private, temp, temp2;
      for (i = 0; i < F.elements.length; i++) {
     f = F.elements[i];
    @@ -548,11 +549,15 @@
     continue;
            }else {
     temp = "protocol" + f.name.substring (fNameTail.length, fNameTail.length + 2);
    +temp2 = fNameIP + f.name.substring (fNameTail.length, fNameTail.length + 2);
     }else {
     temp = "protocol" + f.name.substring (fNameHead.length, fNameHead.length + 2);
    +temp2 = fNameIP + f.name.substring (fNameHead.length, fNameHead.length + 2);
     numProtocol = document.getElementsByName(temp)[0].value;
    +ipv4_private = document.getElementsByName(temp2)[0].value;
    +
     if (f.value.length == 0)continue;
    @@ -584,7 +589,7 @@
     if(rs2=="1") break;}
    -rs = checkDuplication_PortRange3 (F, f, numProtocol, fNameHead, fNameTail, 0, 15);
    +rs = checkDuplication_PortRange3 (F, f, numProtocol, ipv4_private, fNameHead, fNameTail, fNameIP, 0, 15);
     if (rs == true||rs2 == "1") {
     alert (msg_alert_0038);
     //f.value = f.defaultValue;
    diff -ur 192.168.167.1 2/jslib.js 192.168.167.1/jslib.js
    --- 192.168.167.1 2/jslib.js    2010-01-05 13:35:03.000000000 +0100
    +++ 192.168.167.1/jslib.js      2010-01-05 15:27:11.000000000 +0100
    @@ -549,19 +549,21 @@
            return false;
     //rob. 2009.0325 also check protocol type when submit form.
    -function checkDuplication_PortRange3 (F, f, numProtocol, fNameHead, fNameTail, startCount, maxItem)
    +// Marco Papa Manzillo 2009.0105 also check internal IPv4 for internal port when submit form
    +function checkDuplication_PortRange3 (F, f, numProtocol, ipv4_private,fNameHead, fNameTail, fNameIP, startCount, maxItem)
            if (fNameHead.length == 0)      return false;
            if (fNameTail.length == 0)      return false;
            if (f.value.length   == 0)      return false;
            var fPort1 = new Array (null, null, null, null);
    -       var tmpName1, tmpName2;
    +       var tmpName1, tmpName2, tmpName3;
            var fProtocol = "protocol";
            var tmpProtocol;
    -       var a, a2, b1, b2, ck=0,rs;
    +       var a, a2, a3, b1, b2, b4, ck=0,rs;
            a= parseInt (f.value);
            a2=parseInt (numProtocol);
    +       a3=parseInt (ipv4_private);
            tmpName1 = "";
            if (f.name.substring (0, fNameHead.length) == fNameHead)
    @@ -575,19 +577,21 @@
                    tmpName1 = fNameHead + i;
                    tmpName2 = fNameTail + i;
                    tmpProtocol = fProtocol + i;
    +               tmpName3 = fNameIP + i;
                    if (f.name == tmpName1 || f.name == tmpName2)   continue;
    -               rs = DynamicGetField (F, 3, tmpName1, tmpName2, tmpProtocol, "", fPort1);
    +               rs = DynamicGetField (F, 4, tmpName1, tmpName2, tmpProtocol, tmpName3, fPort1);
                    if (rs == false)        continue;
                    b1 = (fPort1[0].value.length == 0) ? 0: parseInt (fPort1[0].value);
                    b2 = (fPort1[1].value.length == 0) ? 0: parseInt (fPort1[1].value);
                    b3 = (fPort1[2].value.length == 0) ? 0: parseInt (fPort1[2].value);
    +               b4 = (fPort1[3].value.length == 0) ? 0: parseInt (fPort1[3].value);
                    if (ck==0)//check tail
    -                       if (a == b2)
    +                       if (a == b2 && a3==b4 ) // Internal IP must be checked only for internal ports.
                                    if ((a2 == 99)||(a2 == b3)) return true;

    First of all I would suggest you to reset the router for 45 seconds and reconfigure all the settings again as you have upgraded the router's firmware.
    What is the IP address you are getting from the modem...?
    What happen when you connect the computer directly to the Modem..?
    Do not load the backup config file on the router.After resetting the router,reconfigure all the settings again.

  • E55 Thread for Firmware Bugs

    I noticed that there isn't yet a thread in order to report E55 firmware bugs, so I started this
    Here the firmware bugs I've found:
    - Hidden WLAN: when you search for wireless access points (for example from the main screen) the phone see always one "hidden wlan", that is not there!
    - Default phone numbers: when you have more phone numbers for a contact, you can choose one of these as default for messaging or dialing, but even if you do that, E55 keep asking you what number to use every time you make a sms
    - Organizer major bug: sometimes (80% of times!) when you edit a memo in Organizer, or when you move it (by changing the start date), you will see that also the end date has changed (adding 1 or more days), even if you didn't touch it! And even if the start and the end date originally matched! So if you had a memo covering one day, now it covers more days, and the end date can't be changed again (you set the correct date, save, and none happens). This make the memos totally unusable!
    - Organizer minor bug: when you open Organizer, and then open a memo, you have to select the information that you want to modify (text, date, synch) and click one more time to edit the memo. But: if you select the "date" or the "synch" row, instead of the "text" row, and then click "modify", the memo is open alway with the cursor on the "text" row. So, the capability of selecting others rows, is pretty useless.
    I hope some Nokia guy will notice this thread so there informations can be useful for a future firmware release, also because I'm getting crazy with the memos issue!!
    Roberto
    Moderator note: word 'official' removed from title, as this may mislead users to believe that the information presented comes from or is in some way endorsed by Nokia.
    Message Edited by michaels on 05-Oct-2009 10:06 AM
    Message Edited by michaels on 05-Oct-2009 03:31 PM
    Roberto Dapino
    http://www.stormvision.it/blog

    hi olandesevolante
    about ur first and second issues u face they r not realy bugs, why?
    for the first one:  i faced that with my E51 in a place i visited before, that hidden WLAN maybe a conflict from another type of waves other than that of wlan using same frequency
    and about the second issue:  default phone numbers is a feature that only set for making calls but when u make an sms the phone will ask u to choose between numbers present unders the same contact name even if u set a default number, so it is not a bug but that is the normal firmware properties
    for the rest of issues , they sound like real bugs
    i hope i helped a little and i wish those bugs will be removed in the next firmware
    Message Edited by michaels on 05-Oct-2009 03:31 PM
    Phones I bought from 1st till now:
    3210 / 3310 / 3410 / 6310 / 6600 / 6020 / N72 / E51 / X2-00 / 5310 xpress Music / E90 Communicator
    If you like my post or it helped you, Give me Kodo

  • Firmware bugs

    Hello!
    I found three firmware bugs and already informed the hotline about one of them in january. It is not fixed in firmware 1.1, so I am posting here.
    The first, already reported, bug can be seen with German language setting when configuring the alarm clock. The dialog where you can enter the desired alarm time shows am/pm time although the other time options change to 24h display when setting the iPod to German.
    The second bug is inside the game Solitair. Very often you can't move a card to the "finished" stack, although it matches perfectly. For example you can move a red four on top of a black five, but not on top of the (matching) red three at the top.
    The third bug is inside the game Brick. I noticed sometimes the ball does not get faster over time which makes it very easy to go through all levels. In fact after some time the first level re-appears.
    The following facts are annoying, but I don't know if I can call them bugs.
    a) My computer very often loses the connection to the iPod while transferring (large) files. I am using opensource software (Linux, gtkpod), so it might be something to preven t users from using non-supported hardware.
    The first message indicating the problem is
    "Nov 26 13:38:13 carsten-otto usb 1-3: reset high speed USB device using ehci_hcd and address 71" just after the transfer stopped. This message repeats some times and then everything gets messy.
    b) Videos stop playing with sound after some time. I did not try with official videos yet, but my self built videos do meet the requirements and should play. After about ten seconds the video stops for about 5 seconds and then starts again, but from now on without sound. Whenever I seek to a new position I can have sound again, but only for another ten seconds.
    Please tell me how to solve the problems and/or how to contact Apple so that they can help me.
    Thank you,
    Carsten Otto

    The Video issue I am having, and I believe all people are having with 5th Generation Video IPODS. I've installed probably 8 or 9 programs over the last two days, hoping to find one that doesn't screw up the video/sound after a few minutes.
    It's interesting because none of the Video Podcasts seem to have a problem running on it, but some information regarding how this is working for Video Podcasts but nothing else is missing. I would hope a firmware upgrade is in the works to fix this problem, because if not I anticipate a large recall, and I think this would be bad publicity for Apple, at a time when many competitors are biting at the bit to take a share out of the market.

  • Nokia 5320 XM firmware bugs concerning date and al...

    Hello!
    Although already having twice sent in my Nokia 5320 XpressMusic for repair, I'm still suffering from severe firmware bugs concerning date and alarm of the device. Here some information on when and how the bugs are showing themselves:
    Settings: A different weekly alarm is programmed for each day of the week. The phone is being switched off for the night.
    The programmed alarm is being run correctly by the phone. The phone is being switched on after having disabled the alarm.
    Some time later the date changes to four or five days in the future. Moreover the phone starts to ring for the day the date has changed to. Often it's not ringing at the time that has been programmed for that day, even though pretending to do so.
    Example:
    9:45 on Sunday: phone is correctly ringing at the programmed time. 
    10:15 on Sunday: phone is incorrectly ringing again pretending it was Friday 7:50
    the clock remains unchanged, however the date has changed automatically for five days
    Linked to this error, there seem to exist similar problems with date and snooze-function already mentioned on these forums:
    /discussions/board/message?board.id=smartphones&message.id=145323
    /discussions/board/message?board.id=smartphones&message.id=144139
    /discussions/board/message?board.id=smartphones&message.id=143893
    As I mentioned above, I already sent my phone in twice, however I always got it back with the mention: repaired on guarantee. To me, this seems rather disgraceful for Nokia. I sincerely hope, that, if necessary with the pressure of other users being concerned as well, we arrive to get a phone that is really working as one could await it from the leader in mobile phone production!
    I hope we will be informed soon about when there will be a firmware update!
    Thanks for your replies!
    Regards,
    Lorenz

    Have the same problem, as I already mentioned in my posts too. But unfortunatly no reply from Nokia either. Seems they really don't care about it. It would be at least apropriate, that they at least announce time of new firmware and note if they will fix this problem with it.
    But no replay from them   I contacted local nokia dealer in Slovenia, but they just say they can not help. And that we must wait for new firmware.
    Now I wonder, when it should came out ?! I am sick of this trouble with my phone. and as you said, I am also turning off my phone since I want my battery to last longer. so this bug must be fixed.
    Nokia team, anyone?!?!?  

  • Cursor moves to upper left corner when not in use

    Hi,
    Since I installed 10.9.3 (last night) the cursor has been jumping to the upper left corner when it is not in use for more than about 3 to 5 seconds.  I'm using a bluetooth mouse and keyboard. 

    Please read this whole message before doing anything.
    This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
    Step 1
    The purpose of this step is to determine whether the problem is localized to your user account.
    Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
    While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
    Test while logged in as Guest. Same problem?
    After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
    *Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
    Step 2
    The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

Maybe you are looking for

  • Is there a workaround for the thumbnail regeneration issue in CS5?

    Hullo. A friend uses my old version of CS5 and she is stuck with ACR 6.7, because this is the last version available in CS5. She seems to have huge problems in Bridge with the thumbnail regeneration bug described here, for instance: Cropping to an ed

  • How to activate open item management to GL account.

    HI Experts, In my company code one GL Account is already exists and it is not having Open item management activated as well as GL account is having 350000 USD balance in that. Now i want to activate open item management for that account, Could you pl

  • Updating code fron AS 2 to AS 3

    I'm trying to update an interesting text/sound Effect I found in Lee Brimelows "gotoAndLearn". I would like to use it in a current project that is all AS3. I have tried updating the code but I keep getting errors: Error #2044: Unhandled IOErrorEvent:

  • XML Purchase Order Example

    Here are the XML files define an instance of a purchase order and the type definition files and ClassDomains required to define the Purchase Order in iFS <?xml version="1.0" standalone="yes"?> <PurchaseOrder> <REFERENCE>AMILLER:20000328-091508137</RE

  • How do I cancel a subscription to IOLO VAIO Premium Tools

    Hi IOLO says they will charge me automatically for VAIO Premium Tools but I don't want to renew the subscription. How can I cancel this?