Firmware Bundled in 10.4.6

I'm getting a "This computer does not need this update" message when trying to apply the firmware update. I did not install it.
Was it burried in the 10.4.6 update for Intel?
If this question has already been asked elsewhere, I appologize to those who's days are runied by multiple posts.

It means they sold you an army/spy version MBP--one that already has all the software/firmware updates--you must be an important person to get one of those.
Please don't ruin the world with it.

Similar Messages

  • System firmware ISO

    Just moved over from the IBM brand, looking for a tool which will create an image with the latest supported firmware bundles for an RD650 server.
    Does such a think exist?

    Hello,
    Thank you for the inquiry. Currently, the ThinkServer brand does not have this capability. However, we do wish support our customers and plan to unify the portfolio in the future for a more consistent experience.

  • HP LaserJet 600 M602 printer goes offline every night

    Hi,
    I have a HP LaserJet 600 M602 CE991A printer on a wired network. I have quite a few other printers on the network as well and do not show me this kind of behavior.
    But for some reason, this printer, from as soon as I bought it, goes offline every time from around 5.20-5.30pm to around 8.30pm. I have a ping tester running as I am trying to figure out what's going on and I got 100% drop every night for that time period.
    I looked to see if there was a setting that puts this device to sleep or so but no, I cant find anything. I have tried with the energy setting sleep mode on or off, wake up events to trigger a wake up call to the printer but no luck.
    Firmware Bundle Version3.2.5
    Firmware Revision2302908_435019
    Firmware Date Code20140529
    I am out of options, in our other locations, we have sam printer but a CE993A models and they do not show this kind of behavior at all.
    I am at a deadlock here.

    Hi @Halan ,
    I see by your post that you aren't able to print when the laptop isn't in the same area as the printer. I would like to help you out today.
    What is the distance of the printer and the Laptop when the printer goes offline?
    Try these steps to see if it will resolve the issue.
    'Printer is offline' Message Displays on the Computer and the HP Printer Will Not Print.
    What operating system are you using? How to Find the Windows Edition and Version on Your Computer.
    If you need further assistance, just let me know.
    Have a nice day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Live Upgrade 2.0 (from Sol8 K23 to Sol9 K05

    Installed LU 2.0 from solaris 9 CDs
    Created a new BE (= copy of my Sol8 K23)
    Start upgrade on my inactiive BE to Sol9
    insert Solaris 9 CD 1of2
    luupgrade -u -n <INACT_BE> -s /cdrom/sol_9_403_sparc/s0
    --> runs fine
    eject cdrom
    insert Solaris 9 CD 2of2
    luupgrade -i -n <INACT_BE> -s /cdrom/sol_9_405_sparc_2 -O '-nodisplay'
    After a few questions, the upgrade starts,
    it first upgrade Live Upgrade ok,
    then it start upgrading Solaris,
    it than fails .
    I checked the logs on the <INACT_BE> and found in
    /var/sadm/install/logs/Solaris_9_pacjages...
    it failed on installing SUNWnsm (Netscape 7) because already installed !!
    It is right that I had SUNWnsm on my Solaris 8 system!!
    Why is this causing LU to fail ?
    It should just skip that package and go to the next
    For the sake of it I deinstalled netscape 7 of my <INACT_BE> using pkgrm -R
    I then restarted the LU using CD 2of2 , now it goes further but fails on package SUNWjhrt (java) which also existed !!
    Do I miss something or is LU just unusable ??Thanks

    Fred,
    I personally have never read that caveat, what is recommended is to always run the same version on components that use the same firmware bundle, in other words....  For a B series upgrade, you need the Infraestruture bundle (include firmware for Fabric Interconnects, IOMs and UCSM) and also need the Server bundle (which includes the firmware for the CIMC, BIOS and Adapter).
    Bottom line, the recommendation is to run exactly the same version for components that use firmware that come from the same bundle BUT,  UCSM 2.1 introduces an enhancement: "Mixed version support (for infra and server bundles firmware) "  wich allows the combination of SOME infraestructure bundles with some server bundles.
    http://www.cisco.com/en/US/docs/unified_computing/ucs/release/notes/UCS_28313.html#wp58530 << Look for
    "Operational enhancements"
    These are the posible configurations I am aware of:
    2.1(1f) infrastructure and 2.0(5a)+ server firmware
    2.1(2a) infrastructure and 2.1(1f)+ server firmware
    I hope that helps.
    Rate ALL helpful answers.
    -Kenny

  • Service Profiles Migration between Server M2 and M3

    Hi Cisco Top Guns!!!
    I have tried to migrate some service profiles between servers M2 (with M81KR) to M3 (with Vic 1240 and Vic 1280) and Windows 2008 R2 recognized the interfaces on M3 as new interfaces.
    The ghost devices interfaces (old interfaces) still presents on Windows and to rename the new interfaces or apply the same IP configurations, I need to remove the ghosts interrfaces.
    On my opinion, this change goes against the UCS philosophy.
    I have a case opened with Cisco Developed Team and now Im sharing this issue with the community. Anyone have benn passed for this problem too?
    Regards,
    Fábio Henrique Teixeira - System ITS

    This is a hardware change to the operating system. While UCSM can abstract the MAC/WWPN/WWNN information, the operating system recognizes a hardware adapter difference and will instatiate new devices. This is an OS issue. Some OS's (Linux) will allow you to set a flag to ignore the hardware change. I'm not aware of whether and what versions of Windows that will allow the same behavor. We cannot modfy the hardware identification change, as we use it within UCSM to manage allowable firmware bundles and adapter polices (vnics/vhbas/fabric failover)

  • Faulty front facing camera

    The front facing camera has stopped working on my iphone 5, wasn't dropped or damage just gave up! Any ideas?

    That is certainly not good. If you are doing a Shift-restore (or Option-restore) make sure you are selecting the proper firmware bundle. Are you reinstalling the software, then restoring from a backup? If there is a problem in the software, then restoring from the backup may bring that same software issue back. I suggest you set it up as a new iPad (don't restore from a backup, and possibly re-download the firmware (as there may be a problem in your firmware .ipsw file. If you need help locating and deleting this ipsw file (so that you can redownload the firmware, making sure there is no software issue) you can look online or ask me. This could be a hardware problem as well, in which case, unless you want to pop open your new, shiny iPad 2's case (and void the warranty) I suggest you take it to Apple to be fixed. 

  • M4555 Scanning Applicatio​n, Speed Up Processing

    Hi, 
    We have a scanning application that runs on the OXPD platform and have tested it with some volume on a customer's site.
    On a M4555 I tested with job building turned on and scanned 200 pages. This scans fine and gets sent to network share fine.
    I would expect a black & white scan to be much quick than a greyscale scan especially as 200 pages was around 20MB for b&W and 140MB for greyscale. However this does not seem to be the case.
    The timings for scanning b&w and greyscale were about the same, 16 minutes in total:
    - 4 minutes to scan and build the job
    - 12 minutes of 'processing'
     - 20 seconds of 'transfer'
    What is happening in the 'processing' stage that takes 12 minutes for both b&w and greyscale scan jobs?
    Are there any changes we can make to our application, or any options that we can set to reduce the amount of processing that is done?
    It is also worth noting that I scanned the same 200 pages on a M4345 (Must be at least 6 years old) and this was actually quicker scanning in b&w. It took 14 minutes in total.
    Product Name:
    HP LaserJet M4555 MFP
    Model Number:
    CE504A
    DC Controller Version:
    4.269
    DC Controller (Secondary) Version:
    4.257
    Optional Trays Version:
    4.256
    Device Serial Number:
    CNEVG1P0VL
    Formatter Number:
    QT9079W
    Firmware Bundle Version:
    3.2.5
    Firmware Revision:
    2302908_435006
    Firmware Datecode:
    20140529
    Internal Disk:
    Hard Disk: Enabled
    Serial Number:
    W0VHV7VM
    Model:
    HP Secure Hard Disk
    Capacity:
    305245 MB
    Hard Disk Encryption Status:
    Encrypted
    Total RAM:
    1280 MB

    Good day,
    To get your issue more exposure, I would suggest posting it in the commercial forums since your product is a commercial product. You can do this at Commercial Forums.
    Enjoy your day!
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • UCS B / UCS manager Upgrade 1.3 to 2 issues

    hi everyone,
    i'm having issues with the download of the image to the fabric interconnect, in event file goes this message
    Description: [FSM:STAGE:STALE-FAIL]: deleting downloadable ucs-k9-bundle-infra.2
    .0.3a.A.bin on local(FSM-STAGE:sam:dme:FirmwareDownloaderDownload:DeleteLocal)
    Affected Object: sys/fw-catalogue/dnld-ucs-k9-bundle-infra.2.0.3a.A.bin
    Trigger: Special
    User: internal
    Cause: Transition
    Code: E4195295
    Creation Time: 2012-07-12T20:36:19.006
    ID: 74438
    Description: [FSM:STAGE:REMOTE-ERROR]: Result: end-point-failed Code: unspecifie
    d Message: End point timed out. Check for IP, password, space or access related
    issues.
    (sam:dme:FirmwareDownloaderDownload:DeleteLocal)
    Affected Object: sys/fw-catalogue/dnld-ucs-k9-bundle-infra.2.0.3a.A.bin
    Trigger: Special
    User: internal
    Cause: Transition
    Code: E4195295
    Creation Time: 2012-07-12T20:36:18.995
    ID: 74435
    Description: [FSM:STAGE:FAILED]: downloading image ucs-k9-bundle-infra.2.0.3a.A.
    bin from 10.8.224.244(FSM-STAGE:sam:dme:FirmwareDownloaderDownload:Local)
    Affected Object: sys/fw-catalogue/dnld-ucs-k9-bundle-infra.2.0.3a.A.bin
    Trigger: Special
    User: internal
    Cause: Transition
    Code: E4195293
    Creation Time: 2012-07-12T20:36:18.995
    i had a SFTP / SCP seber on the same network of the fabric, but i can't get done the download. the server is a host/PC, no antivirus and firewall that cant block the transmission on the side of the host/PC
    any ideas??
    thanks for your help!

    Hi Abhinav,
    bout the things you say to check:
    * Do you have any previous job for the same destination host ip in the download section? If so can you delete it and try again?
    YES, WE HAVE OLDER TASK FOR DOWNLOAD AND WE EREASE IT ALL AND DON'T WORK
    * And have you made sure there are no space issue on the FI / the username-password is correct?
    MAYBE IN THIS ITEM WE DON'S HAVE ENOUGH INFO WE GOT THIS FROM DE FI (THE FILE SIZE WE ARE TRAYING TO SEND IS 550 MB):
    ucs1-A /fabric-interconnect # sh storage
    Storage on local flash drive of fabric interconnect:
        Partition        Size (MBytes)    Used Percentage
        bootflash         8785                          10
        opt                 1916                           2
        workspace        277                           2
    ucs1-A /fabric-interconnect # sh environment
    Fabric Interconnect A:
        Operability: Operable
        Fabric Card 1:
            Threshold Status: N/A
            Overall Status: N/A
            Operability: N/A
            Power State: N/A
            Thermal Status: N/A
            Voltage Status: N/A
        Fabric Card 2:
            Threshold Status: N/A
            Overall Status: N/A
            Operability: N/A
            Power State: N/A
            Thermal Status: N/A
            Voltage Status: N/A
    ucs1-A /fabric-interconnect # sh detail
    Fabric Interconnect:
        ID: A
        Product Name: Cisco UCS 6120XP
        PID: N10-S6100
        VID: V01
        Vendor: Cisco Systems, Inc.
        Serial (SN): SSI144906KJ
        Revision: 0
        Total Memory (MB): 3549
        OOB IP Addr: X.X.X.X
        OOB Gateway: X.X.X.X
        OOB Netmask: X.X.X.X
        Operability: Operable
        Current Task:
    * In case this STFP / SCP client has not worked for you can you try using an alternate protocol and client? e.g. tftf with using the tftpd32.exe as the client.
    We are trying the upgrade with a siftware bundle (550 MB), TFTP has a file size limitation of 32 MB. The firmware bundles can be much larger than that.
    http://www.cisco.com/en/US/docs/unified_computing/ucs/sw/upgrading/from1.3/to2.0/b_UpgradingCiscoUCSFrom1.3To2.0_chapter_011.html#task_C8E850B883D741BFBEF0FBBA409C6CB7

  • CME\7960 running SIP firmware - How do i setup incoming calls? - Can anyone help please?

    Hi Guys,
    I have a SIP trunk setup with a 2811 running CME version 7.  I can make outbound calls ok but having issues getting the incoming calls working, i have 1 number on my SIP trunk and that is 01133501788 and i want that to ring my Cisco 7960 which is running SIP firmware not SCCP.  I have included by config for anyone who can help me, i just want the incoming call to work. 
    Many Thanks.
    Matthew.
    version 12.4
    service timestamps debug datetime msec
    service timestamps log datetime msec
    no service password-encryption
    hostname Router
    boot-start-marker
    boot-end-marker
    logging message-counter syslog
    no aaa new-model
    clock timezone GMT 0
    dot11 syslog
    ip source-route
    ip cef
    no ip dhcp use vrf connected
    ip dhcp excluded-address 192.168.1.1
    ip dhcp excluded-address 10.10.10.1
    ip dhcp pool DATA_POOL
       network 10.10.10.0 255.255.255.0
       default-router 10.10.10.1
       dns-server 188.92.232.50 188.92.232.100
    ip dhcp pool VOICE_POOL
       network 192.168.1.0 255.255.255.0
       default-router 192.168.1.1
       dns-server 188.92.232.50 188.92.232.100
       option 150 ip 192.168.1.1
    ip name-server 188.92.232.50
    ip name-server 188.92.232.100
    no ipv6 cef
    multilink bundle-name authenticated
    voice service voip
    allow-connections h323 to h323
    allow-connections h323 to sip
    allow-connections sip to h323
    allow-connections sip to sip
    no supplementary-service sip moved-temporarily
    no supplementary-service sip refer
    sip
      bind control source-interface FastEthernet0/1.20
      bind media source-interface FastEthernet0/1.20
      registrar server
    voice class codec 1
    codec preference 2 g711ulaw
    codec preference 3 g711alaw
    voice register global
    mode cme
    source-address 192.168.1.1 port 5060
    max-dn 144
    max-pool 42
    load 7960-7940 P0S3-8-12-00
    authenticate register
    tftp-path flash:
    create profile sync 0008072514198272
    voice register dn  1
    number 6999
    allow watch
    name SIP
    label SIP
    voice register pool  1
    id mac 000F.902B.40E0
    type 7960
    number 1 dn 1
    dtmf-relay sip-notify
    username cisco password cisco
    codec g711ulaw
    voice translation-rule 1
    rule 1 /^9\(.*\)/ /\1/
    voice translation-rule 2
    rule 1 /^6...$/ /4143*002/
    voice translation-profile DiscardDigit9
    translate calling 2
    translate called 1
    voice translation-profile IncomingSIP
    translate calling 1133501788
    voice-card 0
    no dspfarm
    username matt privilege 15 secret 5 $1$DCD0$SjWqnKgDSGVzzIKRerXh11
    archive
    log config
      hidekeys
    interface FastEthernet0/0
    ip address 194.12.0.222 255.255.255.252
    ip nat outside
    ip virtual-reassembly
    duplex auto
    speed auto
    interface FastEthernet0/1
    no ip address
    ip nat inside
    ip virtual-reassembly
    duplex auto
    speed auto
    interface FastEthernet0/1.10
    description DATA
    encapsulation dot1Q 10
    ip address 10.10.10.1 255.255.255.0
    ip nat inside
    ip virtual-reassembly
    interface FastEthernet0/1.20
    description VOICE
    encapsulation dot1Q 20
    ip address 192.168.1.1 255.255.255.0
    ip nat inside
    ip virtual-reassembly
    ip forward-protocol nd
    ip route 0.0.0.0 0.0.0.0 194.12.0.221
    ip http server
    ip http authentication local
    no ip http secure-server
    ip nat inside source list 1 interface FastEthernet0/0 overload
    access-list 1 permit 192.168.1.0 0.0.0.255
    access-list 1 permit 10.10.10.0 0.0.0.255
    tftp-server flash:P003-8-12-00.bin
    tftp-server flash:P003-8-12-00.sbn
    tftp-server flash:P0S3-8-12-00.loads
    tftp-server flash:P0S3-8-12-00.sb2
    tftp-server flash:P003-8-12-00
    tftp-server flash:P003-8-12-00.loads
    tftp-server flash:P003-8-12-00.sb2
    tftp-server flash:SIP000F902B40E0.cnf.xml
    control-plane
    mgcp behavior g729-variants static-pt
    dial-peer cor custom
    dial-peer voice 2 voip
    description Outgoing Geographic
    translation-profile outgoing DiscardDigit9
    destination-pattern 0[7]........
    voice-class codec 1
    session protocol sipv2
    session target dns:sip.cloudcalling.co.uk
    dtmf-relay rtp-nte
    no vad
    dial-peer voice 1 voip
    description IncomingSIP
    translation-profile incoming IncomingSIP
    voice-class codec 1
    session protocol sipv2
    session target dns:sip.cloudcalling.co.uk
    incoming called-number .T
    dtmf-relay sip-notify rtp-nte
    no vad
    sip-ua
    credentials username 4143*002 password 7 password realm sip.cloudcalling.co.uk
    authentication username 4143*002 password 7 password
    nat symmetric role passive
    nat symmetric check-media-src
    calling-info sip-to-pstn number set 4143*002
    no remote-party-id
    retry invite 3
    retry register 3
    timers connect 100
    registrar dns:sip.cloudcalling.co.uk expires 60
    sip-server dns:sip.cloudcalling.co.uk
      host-registrar
    gatekeeper
    shutdown
    telephony-service
    load 7960-7940 P0S3-8-12-00
    max-ephones 24
    max-dn 30
    ip source-address 192.168.1.1 port 2000
    max-conferences 8 gain -6
    web admin system name Admin secret 5 $1$Fktw$t9GQkdDdHmoYdwptO8.or.
    transfer-system full-consult
    create cnf-files version-stamp Jan 01 2002 00:00:00
    line con 0
    line aux 0
    line vty 0 4
    login
    scheduler allocate 20000 1000
    ntp server 85.119.80.232
    end
    Router#

    You my friend are a star! worked straight away, many thanks.  Just one more thing, when i make an outgoing call, it always appears as "blocked" on my phone, my sip trunk is set to allow CME to alter outgoing CLI's how would i program the outgoing CLI to 01133501788 also?
    The new working config is below with your suggestion, which works!
    version 12.4
    service timestamps debug datetime msec
    service timestamps log datetime msec
    no service password-encryption
    hostname Router
    boot-start-marker
    boot-end-marker
    logging message-counter syslog
    no aaa new-model
    clock timezone GMT 0
    dot11 syslog
    ip source-route
    ip cef
    no ip dhcp use vrf connected
    ip dhcp excluded-address 192.168.1.1
    ip dhcp excluded-address 10.10.10.1
    ip dhcp pool DATA_POOL
       network 10.10.10.0 255.255.255.0
       default-router 10.10.10.1
       dns-server 188.92.232.50 188.92.232.100
    ip dhcp pool VOICE_POOL
       network 192.168.1.0 255.255.255.0
       default-router 192.168.1.1
       dns-server 188.92.232.50 188.92.232.100
       option 150 ip 192.168.1.1
    ip name-server 188.92.232.50
    ip name-server 188.92.232.100
    no ipv6 cef
    multilink bundle-name authenticated
    voice service voip
    allow-connections h323 to h323
    allow-connections h323 to sip
    allow-connections sip to h323
    allow-connections sip to sip
    no supplementary-service sip moved-temporarily
    no supplementary-service sip refer
    sip
      registrar server
    voice class codec 1
    codec preference 2 g711ulaw
    codec preference 3 g711alaw
    voice register global
    mode cme
    source-address 192.168.1.1 port 5060
    max-dn 144
    max-pool 42
    load 7960-7940 P0S3-8-12-00
    authenticate register
    tftp-path flash:
    create profile sync 0015244443466064
    voice register dn  1
    number 6999
    allow watch
    name SIP
    label SIP
    voice register pool  1
    id mac 000F.902B.40E0
    type 7960
    number 1 dn 1
    dtmf-relay sip-notify
    username cisco password cisco
    codec g711ulaw
    voice translation-rule 1
    rule 1 /^6...$/ /4143*002/
    voice translation-rule 3
    rule 1 /^01133501788$/ /6999/
    rule 2 /^1133501788$/ /6999/
    voice translation-profile IncomingSIP
    translate called 3
    voice translation-profile Translatetrunk
    translate calling 1
    voice-card 0
    no dspfarm
    username matt privilege 15 secret 5 $1$DCD0$SjWqnKgDSGVzzIKRerXh11
    archive
    log config
      hidekeys
    interface FastEthernet0/0
    ip address 194.12.0.222 255.255.255.252
    ip nat outside
    ip virtual-reassembly
    duplex auto
    speed auto
    interface FastEthernet0/1
    no ip address
    ip nat inside
    ip virtual-reassembly
    duplex auto
    speed auto
    interface FastEthernet0/1.10
    description DATA
    encapsulation dot1Q 10
    ip address 10.10.10.1 255.255.255.0
    ip nat inside
    ip virtual-reassembly
    interface FastEthernet0/1.20
    description VOICE
    encapsulation dot1Q 20
    ip address 192.168.1.1 255.255.255.0
    ip nat inside
    ip virtual-reassembly
    ip forward-protocol nd
    ip route 0.0.0.0 0.0.0.0 194.12.0.221
    ip http server
    ip http authentication local
    no ip http secure-server
    ip nat inside source list 1 interface FastEthernet0/0 overload
    access-list 1 permit 192.168.1.0 0.0.0.255
    access-list 1 permit 10.10.10.0 0.0.0.255
    tftp-server flash:P003-8-12-00.bin
    tftp-server flash:P003-8-12-00.sbn
    tftp-server flash:P0S3-8-12-00.loads
    tftp-server flash:P0S3-8-12-00.sb2
    tftp-server flash:P003-8-12-00
    tftp-server flash:P003-8-12-00.loads
    tftp-server flash:P003-8-12-00.sb2
    tftp-server flash:SIP000F902B40E0.cnf.xml
    control-plane
    mgcp behavior g729-variants static-pt
    dial-peer cor custom
    dial-peer voice 1 voip
    description IncomingSIP
    translation-profile incoming IncomingSIP
    voice-class codec 1
    session protocol sipv2
    session target sip-server
    incoming called-number .T
    dtmf-relay sip-notify rtp-nte
    no vad
    dial-peer voice 2 voip
    description Outgoing Geographic
    translation-profile outgoing Translatetrunk
    destination-pattern 0[7]........
    voice-class codec 1
    session protocol sipv2
    session target dns:sip.cloudcalling.co.uk
    dtmf-relay rtp-nte
    no vad
    sip-ua
    credentials username 4143*002 password 7 password realm sip.cloudcalling.co.uk
    authentication username 4143*002 password 7 password
    nat symmetric role passive
    nat symmetric check-media-src
    calling-info sip-to-pstn number set 4143*002
    no remote-party-id
    retry invite 3
    retry register 3
    timers connect 100
    registrar dns:sip.cloudcalling.co.uk expires 60
    sip-server dns:sip.cloudcalling.co.uk
      host-registrar
    gatekeeper
    shutdown
    telephony-service
    load 7960-7940 P0S3-8-12-00
    max-ephones 24
    max-dn 30
    ip source-address 192.168.1.1 port 2000
    max-conferences 8 gain -6
    web admin system name Admin secret 5 $1$Fktw$t9GQkdDdHmoYdwptO8.or.
    transfer-system full-consult
    create cnf-files version-stamp 7960 Dec 17 2013 14:35:13
    line con 0
    line aux 0
    line vty 0 4
    login
    scheduler allocate 20000 1000
    ntp server 85.119.80.232
    end
    Router#

  • "invalid argument" error message when connecting to the App store after upgrading iphone 4 to 5.0 firmware

    Hi everyone,
    I have seen many topics about this problem but none of them helped and they seem to date a little bit so I would like to ask again.
    here is the situation :
    we have two iphone 4 in the house and everything was going fine until we did the update to the new 5.0 firmware. there was no problem while the update had only been applied to the first iphone... but after updating the second one, we now have the same problem on both iphones. We can still connect to the internet from the iphone just fine but the connection is erratic at best with the itunes store because we keep getting cut by this dreaded error message "connection to the itunes store impossible, "invalid argument" occasionnally we'd get a different message that says "connection reset by peer"
    - what is invalid argument mean anyway???
    - I have tried to renew the lease in the network settings, it didn't work
    - I have tried to reset the network setting, it didn't help
    - I have checked in the network setting for the IP address, it starts with 192.xx.xx..... which is supposed to be a good thing as opposed to 162.xx.xx....
    - I have reset my router, nothing happened...
    - I have tried unauthorising my computer to any accounts because we were afraid that using two iphones with two different itunes store accounts one the same computer may have caused these problems.. but no luck
    I am running out of ideas, I would like to renew my frustration to apple because we buy these expensive products and still seem to suffers from stupid bugs... I was under the impression that these things were tested !!! anyway if anyone has found a definitive solution to this problem (short of burning your iphone out of anger) it would be deeply appreciated.
    thx

    Hi!
    I'm also using Air SDK 15 and I'm getting  Invalid Bundle Error:
    Adobe Air iOS Invalid Bundle
    The bundle does not support the minimum version os specified in info.plisthttp://stackoverflow.com/questions/26047837/adobe-air-ios-invalid-bundle-the-bundle-does-n ot-support-the-minimum-version-os
    Really need help
    Michael

  • Mac shuts down? Already updated firmware.

    My MacBook has been fine since I bought it in May 2007. However, today I had left my MacBook on and plugged in, while a read a book. I turned to my MacBook, and Firefox had shut down. I wasn't sure why, but I just opened it back up. I left my MacBook again, positive I left it on, and when I came back, it (my Mac) was off. This happened twice today. Maybe it's Firefox, it was open both times my computer shut down, but I haven't updated it, or my Mac today or yesterday.
    I'll update this post as needed.
    EDIT: Forgot to add that I never saw my Mac shut down. I am almost positive I left it on though.

    Is it plugged in when you do this or running on battery? What firmware update are you talking about?
    Check and see if you have battery update 1.3 installed. You should find it at the location listed. Right click on the bundle and check *Get Info* a window will open and you can check the version there.
    MacBook/System/Library/SystemConfiguration/BatteryUpdater.bundle
    Leopard(10.5.1) and Tiger(10.4.11) installs it. It is the MacBook Pro update.
    If it is 1.3 drag it to the trash and then reboot. After you reboot you will be able to empty the trash. Once you have done that run software update and it should install Battery Update 1.2. You should reset the SMC (System Management Controller) after doing this.

  • Firmware update progress bar appears and computer won't start up

    Hi,
    I am on OS X 10.6 (the latest developer build, whose build number I can't remember and can't look up because my computer won't start up) and this morning when I tried to start up my computer, it chimed, the apple appeared but then a grey progress bar (like the one that appears during a firmware update) appeared at the bottom of the screen along with the customary spinner. This progress bar didn't update and after 10-ish seconds, it disappeared and left just the spinner. I left the computer in this state for 4 hours and nothing happened. It still starts up in single user mode (but I can't seem to get Open Firmware mode to load) and it starts Windows XP on another partition of my main HD.
    When I start it in verbose mode, it says that my catalog B-tree has keys out of order and it is unable to repair them. Also, I get an error message from launchctl: "Bug: launchctl.c:2033 (23930):17: auditquickstart() == 0". Then later on it tells me to convert a few system plist files to launchd (all in the /etc/mach_init.d/ folder). The very last line says "launch_msg(): Socket is not connected".
    I would rather not re-install the system, but if I have to, I guess I will. I appreciate any light that anyone can shed on this problem.
    Thanks,
    Kyle

    Yes, they (the third-party utilities) both come on bootable DVD's. As I mentioned, since Snow Leopard was just released in its final version, the developers may be in the process of releasing updates.
    Your situation is likely to be a case where the data corruption issue already existed before installing Snow Leopard, and the installation process made the problem more apparent (because something critical was installed where it was affected by the data issue).
    It is a good idea to run +Repair Disk+ in Disk Utility on the startup volume before installing a major system update. Actually, I do it before any system-level update.
    You should also have a backup (at least of your personal data if not the entire volume), in case something bad happens during a major system upgrade. If you were using Time Machine, the easiest recovery would be to reformat the internal drive and use the Time Machine complete volume restore utility to restore the volume back to the date/time state just before you installed Snow Leopard. Then, after restarting from that restored volume to make sure everything is working, start up from the Snow Leopard installation disc, run Disk Utility and use +Repair Disk+ (just to be sure), and run the upgrade to Snow Leopard again.
    If you have a backup of at least your personal data, you may want to reformat the internal drive, install Snow Leopard and bundled apps, install your third-party apps from their original sources, update everything that needs updating, and restore your personal data.
    If you don't have a backup, the best bet is to try either DiskWarrior or TechTool Pro. DiskWarrior is very specialized into repairing this type of data problem. TechTool Pro has similar capability, but it is a more general tool with other features.

  • What's wrong with 7.6 firmware?

    My Time Capsule was unreachable from my computers after installing the new firmware 7.6 a few weeks ago.
    I downgraded today back to 7.5.2 and everything is fine again.
    What's wrong with this firmware and why hasn't Apple realized that it's causing problems for people?!

    Thank you kindly, Wyodor! I was hoping that that was the case.
    Now it's up to the 1 billion Windows users to update.
    A number of folks will be doing that without explicitly intending to from now on.
    I doublechecked, and was able to confirm that QT 7.6.5 is now in the iTunes for Windows 9.0.2.25 installer bundle (along with the new Apple Application Support version 1.1.0).
    (I uninstalled my existing iTunes 9.0.2.25, and launched Apple Software Update. I did a "Tools > Open Downloaded Updates Folder", and cleared all existing items from the folder (to avoid any possible confusion later on). Back in ASU, I selected iTunes, did a "Tools > Download only". The AppleApplicationSupport.msi that showed up in the Downloaded Updates folder was a version 1.1.0, and the QuickTime.msi was a version 7.6.5.)
    So, the updating process has begun ... since a whole bunch of folks would have already updated to iTunes 9.0.2.25 (using versions of installers containing the old QT 7.6.4 and ASU 1.0.1), it'll be a bit of a trickle (comparatively speaking) at first. But next time there's an iTunes version update, a whole bunch of folks will get past the potential for having the particular problems we've been tracking.

  • Updating Media Hub firmware *without* an Internet connection? (+ A few other questions)

    Hi everyone! :-)
    I recently purchased an NMH305 in the DSG retail stock clearance, which I am planning on using as a "Black hole" for my audio, video and software collections. Before I begin setting it up though, I need to check on a few things and ask a few questions. :-)
    First things first, here's a brief overview of my network and some other stuff:
    My network has no connection to the Internet whatsoever. I was previously online with a major UK ISP, but because of numerous connection issues and the fact that a direct connection has negative impacts on my lifestyle, I decided to get rid of it and do without.
    Consequently, all of my access to the Internet (E.G: Posting here) is done through local libraries and friends connections.
    Most of my systems run Windows XP, but I also have a few Ubuntu, Fedora, and OEM firmware based clients knocking around as well. Windows VII and/or a mass switch-over to Linux may occur in the future.
    All network clients are wired up with 100mbps fast ethernet (No wi-fi)
    My Media Hub currently has it's 500GB WD Green Caviar installed, but my plan is to replace this with two 500GB 7200rpm Hitachi drives stripped out of USB external caddies for quicker access times, greater peace of mind (I don't really trust Western Digital products) and use the more efficient Caviar as an external HDD insted.
    Because I like to keep my systems as "light" as possible; I'd like to skip using the bundled set-up CD (Which'll install a lot of stuff that I don't need) and insted set-up the Media Hub manually using a web browser or terminal connection.
    I consider myself to be an experienced and advanced user, and therefore I'm comfortable with the idea of configuring and operating my Media Hub via an SSH or Telnet session.
    Downloading, backing-up and restoring Firmware by hand:
    Anyhow...The first question I'd like to ask is How can I backup and update the firmware on my media hub using only my local network? I know full well that I can download the firmware images using just a web browser, but I cannot seem to find a direct URL anywhere on the Linksys site. The closest lead I've got so far is http://downloads.linksysbycisco.com/downloads/firmware/NMH_FW_3_18_15_B_ReleaseNotes.txt...But no logical variations of this URL that I've tried (Drop the _ReleaseNotes.txt, try .bin .img .tar .tgz and .tar.gz extensions) have resulted in success. :-(
    If anyone has the direct URLs for the firmware images, I'd be most greatful. Failing that, if anyone can tell me the URL that the Media Hub uses to perform a version check (A few packets dumped via WireShark during a check will do) I can follow the HTTP chain from there by hand. :-)
    Naturally, I'm assuming that there is a means by which to dump and upload firmware to/from the Media Hub (Via an SSH session, most likely) but if not, would serving the firmware update from one of my own systems (Using a record on my local DNS) work, or does the Media Hub use a secure connection for this?
    Operating the Media Hub via SSH/Telnet:
    As the Media Hub runs a customised version of Linux, I presume that administration via Telnet and SSH are available. I assume that the default login would be root / admin (I'm assuming the web interface also uses the root account for it's administrative logon) but is that correct...Or would I need different credentials to those for a Telnet/SSH login?
    Installing new HDDs: Anything need keeping off the old one?
    Finally; As I mentioned above, I'm planning to swap the OEM drive supplied with two others before use. I'm currently leafing through the users manual and am about to come across the procedure given for drive replacement, but given the size of the Media Hub's UI - Which looks to me to be pretty heavily featured - I doubt the whole lot would fit on the Hub's firmware flash...So presumably I'd need to back-up interface data and files from the OEM disk to the new disks first.
    Dumping data from one disk to another isn't a problem (dd has become one of my favourite utilities over the past year) but - Thinking from the viewpoint of efficiency - Is it possible to restore the UI data and interface alone (No media lists or cache info - That's better regenerated after) without having to dump the first x sectors from one disk to another?
    Also; Given the unit comes with a 5400rpm WD Green Caviar, will the Media Hub's PSU handle two standard 3.5" HDDs (Which could draw about 15-20w each) without problems? :-)
    Farewell for now, apologies for the length of this post, and many thanks in advance for any help! >:-)
    +++ DieselDragon +++

    Check out the posts here and another one here .
    Better check with the hardware tested list below for the harddrives.
    NMH Series Hardware Tested List
    Cheers.

  • I've just updated my firmware (as requested) this afternoon, and now ALL my fonts are openned in CS4 although many of them are 'OFF' in Fontbook.

    I installed my firmware & security updated (as requested) this afternoon, and now ALL my fonts are opened in Creative Suite 4 although most of them are set to 'OFF' in Fontbook. I also noticed the following problems:
    :: When I print (via Finder): the page._ to page _ option within the print window no longer exists; meaning: I can only print ALL pages.
    :: Also: In InDesign, the 'Help' menu has replaced the former InDesign Help menu, with Apple Help menu.

    Thanks! As for the Font issue, I should've included the following. When I repaired the permissions, the following repairs were listed (see above). Then I close Disk Uiltity, test InDesign (to not avail). Then I open Disk Utility again, repair permission again, and the EXACT same permission problems reappear. They follow.
    At any rate: I'll give both Adobe and Apple support a ring tomorrow. Thanks for having tried to help, Babowa. I very much appreciate it. Enjoy your evening?
    2011-06-02 20:26:01 -0700: Disk Utility started.
    2011-06-02 20:26:07 -0700: Repairing permissions for “Macintosh HD”
    2011-06-02 20:26:13 -0700: Permissions differ on "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Classes/dt.jar", should be lrwxr-xr-x , they are lrw-r--r-- .
    2011-06-02 20:26:13 -0700: Repaired "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Classes/dt.jar".
    2011-06-02 20:26:13 -0700: Permissions differ on "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Classes/jce.jar", should be lrwxr-xr-x , they are lrw-r--r-- .
    2011-06-02 20:26:13 -0700: Repaired "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Classes/jce.jar".
    2011-06-02 20:26:13 -0700: Permissions differ on "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Classes/jconsole.ja r", should be lrwxr-xr-x , they are lrw-r--r-- .
    2011-06-02 20:26:13 -0700: Repaired "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Classes/jconsole.ja r".
    2011-06-02 20:26:13 -0700: Permissions differ on "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Classes/management- agent.jar", should be lrwxr-xr-x , they are lrw-r--r-- .
    2011-06-02 20:26:13 -0700: Repaired "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Classes/management- agent.jar".
    2011-06-02 20:26:13 -0700: User differs on "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home/lib", should be 0, user is 95.
    2011-06-02 20:26:13 -0700: Repaired "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home/lib".
    2011-06-02 20:26:13 -0700: Permissions differ on "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home/lib/dt.jar", should be -rw-r--r-- , they are -rwxr-xr-x .
    2011-06-02 20:26:13 -0700: Repaired "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home/lib/dt.jar".
    2011-06-02 20:26:13 -0700: Permissions differ on "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home/lib/jce.jar", should be -rw-r--r-- , they are -rwxr-xr-x .
    2011-06-02 20:26:13 -0700: Repaired "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home/lib/jce.jar".
    2011-06-02 20:26:13 -0700: Permissions differ on "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home/lib/management -agent.jar", should be -rw-r--r-- , they are -rwxr-xr-x .
    2011-06-02 20:26:13 -0700: Repaired "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home/lib/management -agent.jar".
    2011-06-02 20:26:13 -0700: Permissions differ on "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home/lib/security/b lacklist", should be lrwxr-xr-x , they are lrw-r--r-- .
    2011-06-02 20:26:13 -0700: Repaired "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home/lib/security/b lacklist".
    2011-06-02 20:26:13 -0700: User differs on "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Libraries", should be 0, user is 95.
    2011-06-02 20:26:13 -0700: Repaired "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Libraries".
    2011-06-02 20:26:14 -0700: Permissions differ on "System/Library/Java/Support/Deploy.bundle/Contents/Home/lib/security/cacerts", should be lrwxr-xr-x , they are lrw-r--r-- .
    2011-06-02 20:26:14 -0700: Repaired "System/Library/Java/Support/Deploy.bundle/Contents/Home/lib/security/cacerts".
    2011-06-02 20:26:14 -0700: Permissions differ on "System/Library/Java/Support/Deploy.bundle/Contents/Resources/Java/deploy.jar", should be lrwxr-xr-x , they are lrw-r--r-- .
    2011-06-02 20:26:14 -0700: Repaired "System/Library/Java/Support/Deploy.bundle/Contents/Resources/Java/deploy.jar".
    2011-06-02 20:26:14 -0700: Permissions differ on "System/Library/Java/Support/Deploy.bundle/Contents/Resources/JavaPluginCocoa.b undle/Contents/Resources/Java/deploy.jar", should be lrwxr-xr-x , they are lrw-r--r-- .
    2011-06-02 20:26:14 -0700: Repaired "System/Library/Java/Support/Deploy.bundle/Contents/Resources/JavaPluginCocoa.b undle/Contents/Resources/Java/deploy.jar".
    2011-06-02 20:27:22 -0700: Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Classes/dt.jar", should be -rw-r--r-- , they are lrwxr-xr-x .
    2011-06-02 20:27:22 -0700: Repaired "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Classes/dt.jar".
    2011-06-02 20:27:22 -0700: Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Classes/jce.jar", should be -rw-r--r-- , they are lrwxr-xr-x .
    2011-06-02 20:27:22 -0700: Repaired "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Classes/jce.jar".
    2011-06-02 20:27:22 -0700: Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Classes/jconsole.jar ", should be -rw-r--r-- , they are lrwxr-xr-x .
    2011-06-02 20:27:22 -0700: Repaired "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Classes/jconsole.jar ".
    2011-06-02 20:27:22 -0700: Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Classes/management-a gent.jar", should be -rw-r--r-- , they are lrwxr-xr-x .
    2011-06-02 20:27:22 -0700: Repaired "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Classes/management-a gent.jar".
    2011-06-02 20:27:22 -0700: User differs on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home/lib", should be 95, user is 0.
    2011-06-02 20:27:22 -0700: Repaired "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home/lib".
    2011-06-02 20:27:22 -0700: Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home/lib/dt.jar", should be lrwxr-xr-x , they are -rw-r--r-- .
    2011-06-02 20:27:22 -0700: Repaired "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home/lib/dt.jar".
    2011-06-02 20:27:22 -0700: Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home/lib/jce.jar", should be lrwxr-xr-x , they are -rw-r--r-- .
    2011-06-02 20:27:22 -0700: Repaired "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home/lib/jce.jar".
    2011-06-02 20:27:22 -0700: Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home/lib/management- agent.jar", should be lrwxr-xr-x , they are -rw-r--r-- .
    2011-06-02 20:27:22 -0700: Repaired "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home/lib/management- agent.jar".
    2011-06-02 20:27:22 -0700: Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home/lib/security/bl acklist", should be -rw-r--r-- , they are lrwxr-xr-x .
    2011-06-02 20:27:22 -0700: Repaired "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home/lib/security/bl acklist".
    2011-06-02 20:27:22 -0700: User differs on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Libraries", should be 95, user is 0.
    2011-06-02 20:27:22 -0700: Repaired "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Libraries".
    2011-06-02 20:27:22 -0700: Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Resources/JavaPlugin Cocoa.bundle", should be drwxr-xr-x , they are lrwxr-xr-x .
    2011-06-02 20:27:22 -0700: Repaired "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Resources/JavaPlugin Cocoa.bundle".
    2011-06-02 20:27:22 -0700: Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Resources/JavaPlugin Cocoa.bundle/Contents/Resources/Java/deploy.jar", should be -rw-r--r-- , they are lrwxr-xr-x .
    2011-06-02 20:27:22 -0700: Repaired "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Resources/JavaPlugin Cocoa.bundle/Contents/Resources/Java/deploy.jar".
    2011-06-02 20:27:22 -0700: Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Resources/JavaPlugin Cocoa.bundle/Contents/Resources/Java/libdeploy.jnilib", should be -rwxr-xr-x , they are lrwxr-xr-x .
    2011-06-02 20:27:22 -0700: Repaired "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Resources/JavaPlugin Cocoa.bundle/Contents/Resources/Java/libdeploy.jnilib".
    2011-06-02 20:27:22 -0700: Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/A/Resources/Deploy.bundle/ Contents/Home/lib/security/cacerts", should be -rw-r--r-- , they are lrwxr-xr-x .
    2011-06-02 20:27:22 -0700: Repaired "System/Library/Frameworks/JavaVM.framework/Versions/A/Resources/Deploy.bundle/ Contents/Home/lib/security/cacerts".
    2011-06-02 20:27:22 -0700: Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/A/Resources/Deploy.bundle/ Contents/Resources/Java/deploy.jar", should be -rw-r--r-- , they are lrwxr-xr-x .
    2011-06-02 20:27:22 -0700: Repaired "System/Library/Frameworks/JavaVM.framework/Versions/A/Resources/Deploy.bundle/ Contents/Resources/Java/deploy.jar".
    2011-06-02 20:27:22 -0700: Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/A/Resources/Deploy.bundle/ Contents/Resources/Java/libdeploy.jnilib", should be -rwxr-xr-x , they are lrwxr-xr-x .
    2011-06-02 20:27:22 -0700: Repaired "System/Library/Frameworks/JavaVM.framework/Versions/A/Resources/Deploy.bundle/ Contents/Resources/Java/libdeploy.jnilib".
    2011-06-02 20:27:55 -0700: Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired.
    2011-06-02 20:28:27 -0700:
    2011-06-02 20:28:27 -0700: Permissions repair complete
    2011-06-02 20:28:27 -0700:
    2011-06-02 20:28:27 -0700:

Maybe you are looking for