Firmware Failure & Blank Screen

I installed 1.5 EFI Firmware and this caused my MBP to start-up with a blank screen.
Thanks to this forum http://discussions.apple.com/message.jspa?messageID=7119212 , I found that deleting the sleepimage file from /private/var/vm/ fixed the problem. This was after AppleCare had written off the problem as being hardware related.
I had to restart the MBP this morning, however, and the problem had returned. This time the sleepimage file was not in situ. (I looked with the MBP in target disk mode.) When I rebooted again the display was back again, so I called AppleCare.
To cut a long story short, Apple does not recognise this as a problem, but will 'escalate' to engineering. I was offered - the deeply unhelpful - option of an archive and install, but the agent acknowledged that this would not fix whatever was in EFI. (Or does EFI have a disk-based component?)
I have now been told that my local service provider can force an EFI Firmware update, but does anyone here know if this is possible? (My experience of this sort of thing in the past has entailed logic board replacements, but I would like to know what I am letting myself in for.)
[I should have said that 1.5.1 will not install as it's 'not needed', so I have to assume that 1.5 installed whatever it installed properly!]
Message was edited by: Bernard Harte

Hi
> Why was this thread closed?
I think the admin closed this thread because as mentioned by the user lumix2day the MS update has solved this issue.
The M400 was delivered with Win XP therefore the update should works with WinXP!
Regarding your issue;
It looks like you are using your own copy of Vista on the M400.
You should check if the Vista is already up-to-date. Every week new MS updates are published.
Additinally I would recommend updating the BIOS and check for a newest display driver update!!!
Best regards

Similar Messages

Trouble Booting: Open Firmware error, blank screen, frozen gray screen, etc

So I got the "To continue booting, type 'mac-boot' and press return" message today when I started my computer.
I restarted and reset the PRAM.
The message still appeared after I reset PRAM so I reset the Open Firmware settings by typing "reset-nvram" and pressing return and then typing "reset-all" and press returning.
The computer restarted but still came to the "To continue booting, type 'mac-boot' and press return" message.
That's when I noticed this at the top of the screen:
DEFAULT CATCH! code: fffffff6 %RR0: ff80b260 %SRR1: 0000b030
I think I wrote all of it down correctly.
I had a mouse attached when the problem occurred the first time. I removed the mouse and restarted the computer.
The next time I started up the computer all I got was a blank (black) screen. I could hear the harddrive on, but nothing showed up on the screen. Shut it down by holding in the power button, started it again, same result. I shut it down again, held in the little reset button on the back, and started it up again and this time it worked.
A few start-ups later, I got the grey Apple screen but it froze there. I restarted and got the same result as described above, and followed the same steps as above to get started up.
Suggestions?

If you get to a dialog prompt that reads, "To continue booting, type 'mac-boot' and press return."
You need to reset your Mac's built-in low-level operating system, Open Firmware. Open Firmware is the first thing your Mac looks at when it boots and is responsible for telling your Mac what to do when it turns on.
When you get that screen prompt type; don't type mac-boot-
type
reset-nvram
press the return key on your keyboard
reset-all
press return again
Some machines may return "unknown word" in response to the reset-nvram instruction; if that happens, try init-nvram instead.
If you get the dialog prompt shown in the first line of this post every time you startup, reset the PRAM as shown in Apple doc.#2238.
Post back if you need more....
Cheers!
DALE

ZEN: Blank screen after firmware upd

I updated my 4GB ZEN to .0.05 firmware.
It worked well for a few hours then it just went dark screen, not responding.
I couldn't access the recovery mode and my computer won't detect it.
When I reseted the player, the Creative logo came up and then blank screen, nothing.
Flashing the firmware back to the older version is not an option (tried, my computer won't detect the player)
Neither does the recovery tools (tried, same reason as above)
So I guess the only option I have left is to go to the service center, right?

if you read to other posts with the same problem you see what you need to do to fix it ..... but just for jou the last time??this is what i diid and it works :?To Fix any problems with broken firmware form attempted "playsforsure" firmware updates etc where your pc finds it as a 20mb dri've and it sits in recovery mode and does bugger all:
(fix courtesty of cinderlee in creative forums)
1. Uninstall all creative software & drivers
2. Uninstall Media Player and Media Player runtime (will require a reboot for each thing). This is done by going to add/remove programs and uninstalling (this will put your pc back to wmp0).
3. Re-install the Zen Driver from the creative website and reboot
4, Plug Zen in.
5, Make sure you have the firmware update ready, run it but don't click the language bit yet), leave the mouse hovering over your language selection.
6. On the Zen- select "reload OS"
7. As soon as it flashes up "reload new firmware now via USB" click the language button
8. Tada, now the pc should find it and allow you to re-load the firmware. (it may take a few attempts)
9. Once complete, click close and restart the pc. Everything should now be fine.
0. once you are happy you can re-install WMP and it will work fine.
Cheers!?thanks for ather forums that had bringed me the information

7961G-GE stuck in constant reboot with a blank screen

Hi all,
I just bought a used 7961G-GE and attempted to implement it into my current running CME environment. For some reason my 7961G-GE is constantly rebooting with a blank screen upon receiving power from my 3550 switch. I currently have 2 7940's and a 7961G that have registered without any issues. I tried to debug tftp event's on my router to see if at least my 7961G-GE was able to contact the TFTP server but I get no results at all. I also did a dhcp bindings check and it looks like the 7961G-GE phone is unable to get an ip address either. I have the proper option 150 configurations as my other phones are able to reach the tftp server without any issues. I've also uploaded and tried firmware versions 8.2 through 8.5 and assigned the proper file to the load command. When I do a "more system:/its/vrf1/XMLDefault.cnf.xml" to see if the command was executed, it shows the correct file within the open and close tags of the proper load information tags. This is just really baffling to me because I'm getting no response at all when I try to debug the events with this phone with the exeception of it rebooting every few seconds with a blank screen. I do get an error message when I do the load command that says "
LOAD COMMAND ERROR:cnf-file location system is not supported,Plese use flash|slot0|tftpUpdating CNF files", but again, when I look at the XML files that all my phones request they all show the proper info within their tags including 7961G-GE.
Any pointer's as to why this is happening?
Thanks
-Jason

Maybe the unit was in the middle of a complete flash reset when the seller pulled the power. Normally a flash reset takes about, wait for it, an hour.

Blank Screen after start-up chime, won't start

I'm rather perplexed as to what's happened to my PowerBook. I'll run throught it
PowerBook 12" 1.33 768
Background:
I've just updated it to 10.4.4, which caused it to get stuck at the Apple symbol and spinning wheel. I had to restart in single user mode and run applejack, restart again and it was fine.
Recently the PowerBook started to not wake from sleep, I'd have hold down the power button then restart it. I thought it had done teh same thing today, but this time it makes the start-up chime but gets no further than a blank (dark, black) screen.
I tried inserting the Mac OS X CD and start up holding down the C key, but still same blank screen (with the added benefit that I'm now unable to remove the CD)
I tried plugging it into an external monitor, but nothing.
I've tried resetting the Preference RAM and the PMU. With some limited success. On occasion after resetting the PRAM, turning it off then back on, it starts with something like a extra blow of air from the fan and white blank screen instead of a black one. It then won't turn off at all, the only way is to pull the power and the battery.
I've noticed that when the ac adapter is plugged in and i've the white screen it flashes very quickly, orange.
I tried starting in Tartget disc mode connected to an iMac, the disc doesn't appear.
I tried starting up with an external firewire drive attached, nothing.
I've tried starting holding the keys for open firmware mode, nothing.
I've removed the AirPort card, no change.
I removed the extra 512mb RAM with no change.
The screen is clearly working, has anyone any ideas how to get it started?
Any help would be appreciated, it's a second hand PowerBook and so has no AppleCare.
Cheers
Stuart

I had the EXACT same problem happen to me, Stuartea71. My PowerBook crashed on the on Feb. 4th and I still can't figure it out. I had just dowloaded the 10.4.4 update, bought iLife 06, and ordered a new battery.
I tried every single thing that you did above. I finally called customer support, and walked me through a few things which I had already tried, but she finally pin pointed something in disk utility that I missed. My disk would not mount. In red letters it said "failing." She told me that was a internal HD problem that needs to be fixed by a certified tech.
I did something I'd never done before. I put my HD to sleep to optimize battery performance. I work with podcasts and downloaded a large file. Unfortunately I forgot my battery setting. I chalk it up as a lesson learned, and just bit the bullet and ordered a MacBook Pro.
BTW... if you all customer service they basically read directly from the Apple Website. I paid $49 dollars for someone to tell me my mac was broken and send it in.

Blank Screen after factory reset 7911 phone

Hello guys,
I had a weird issue on an 7911 ip phone. It was connected to my network and on the display of the phone was saying "ethernet disconnected".
What i did was a soft and a hard reset using 123456789*0# and then 3497672850*# following the guidelines of a conversation in the forum
https://supportforums.cisco.com/thread/2166581
After the factory reset the device has a blank screen (I left it for more than an hour connected on the network bearing in mind that some processes might be loading in the background and the firmware will load at some point..that didn't happen) and it is unable to receive an ip address ("show ip dhcp bindings", shows nothing related to the mac address of that device).
To eliminate the possibility that the problem might be on the network card of the phone, i've factory reset a working phone using the above described procedure.
I had the same problem with that phone too.
Are there are any log commands that i can use to further investigate my issue? (I can't see any logs using "terminal monitor"command)
I am using call manager express 4.3.0 on a cisco 2800 router.

Dragan,
I tried what you suggested with no luck.
What i noted is that, when i plug the power adapter on the phone and connect the ethernet cable on the switch port of the phone (the other end goes to a d-link small switch) the light on the small d-link switch doesn't come up. However if i plug the ethernet cable on the pc port of the phone the light goes green. I checked it with two phones that i've factory reset and it is the same problem.
What i understood from this, is that the pc is unable to retrieve an ip from the dhcp server and the necessary option 150 to locate the tftp server and retrieve the necessary firmware.
Gordon, due to the above mentioned problem i can't proceed with wireshark since i don't have network connectivity between the phone and my workstation.
Guys, do you have any alternatives that i can give a try?
Thanks a banch!

[SOLVED] Blank screen starting new Xorg (ATI)

Yes, it's another blank screen problem with xorg. Sorry.
After months of sticking with an older Xorg (due to problems with my ATI Radeon X1550 card and the new Xorg w/ dual head), I decided to make a jump and update to the latest Xorg and ati drivers, foregoing dual screens. I've read you can just start Xorg without a config, which I tried, but no luck. I just get a blank screen. I autogenerated a config file and still get a blank screen. Either way there's no default X cursor or xterm anywhere.
I've tried adding the AllowEmptyInput flag as suggested in related threads, but that doesn't help. My .conf file and log file are listed below. If someone could give me some suggestions to solve this, I'd appreciate it.;
My xorg.conf.new file:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "ServerFlags"
Option "DontZap" "false"
Option "AllowEmptyInput" "off"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
# Load "glx"
Load "extmod"
Load "record"
Load "dri2"
Load "dbe"
Load "dri"
Load "drm"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
#DisplaySize 380 300 # mm
Identifier "Monitor0"
VendorName "ACR"
ModelName "AL1916"
HorizSync 31.0 - 81.0
VertRefresh 56.0 - 75.0
Option "DPMS"
EndSection
Section "Device"
### Available Driver options are:-
### Values: : integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "SWcursor" # [<bool>]
#Option "Dac6Bit" # [<bool>]
#Option "Dac8Bit" # [<bool>]
#Option "BusType" # [<str>]
#Option "CPPIOMode" # [<bool>]
#Option "CPusecTimeout" # 
#Option "AGPMode" # 
#Option "AGPFastWrite" # [<bool>]
#Option "AGPSize" # 
#Option "GARTSize" # 
#Option "RingSize" # 
#Option "BufferSize" # 
#Option "EnableDepthMoves" # [<bool>]
#Option "EnablePageFlip" # [<bool>]
#Option "NoBackBuffer" # [<bool>]
#Option "DMAForXv" # [<bool>]
#Option "FBTexPercent" # 
#Option "DepthBits" # 
#Option "PCIAPERSize" # 
#Option "AccelDFS" # [<bool>]
#Option "IgnoreEDID" # [<bool>]
#Option "DisplayPriority" # [<str>]
#Option "PanelSize" # [<str>]
#Option "ForceMinDotClock" # <freq>
#Option "ColorTiling" # [<bool>]
#Option "VideoKey" # 
#Option "RageTheatreCrystal" # 
#Option "RageTheatreTunerPort" # 
#Option "RageTheatreCompositePort" # 
#Option "RageTheatreSVideoPort" # 
#Option "TunerType" # 
#Option "RageTheatreMicrocPath" # <str>
#Option "RageTheatreMicrocType" # <str>
#Option "ScalerWidth" # 
#Option "RenderAccel" # [<bool>]
#Option "SubPixelOrder" # [<str>]
#Option "ShowCache" # [<bool>]
#Option "DynamicClocks" # [<bool>]
#Option "VGAAccess" # [<bool>]
#Option "ReverseDDC" # [<bool>]
#Option "LVDSProbePLL" # [<bool>]
#Option "AccelMethod" # <str>
#Option "DRI" # [<bool>]
#Option "ConnectorTable" # <str>
#Option "DefaultConnectorTable" # [<bool>]
#Option "DefaultTMDSPLL" # [<bool>]
#Option "TVDACLoadDetect" # [<bool>]
#Option "ForceTVOut" # [<bool>]
#Option "TVStandard" # <str>
#Option "IgnoreLidStatus" # [<bool>]
#Option "DefaultTVDACAdj" # [<bool>]
#Option "Int10" # [<bool>]
#Option "EXAVSync" # [<bool>]
#Option "ATOMTVOut" # [<bool>]
#Option "R4xxATOM" # [<bool>]
Identifier "Card0"
Driver "ati"
VendorName "ATI Technologies Inc"
BoardName "RV505 [Radeon X1550 Series]"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
My Xorg.0.log:
X.Org X Server 1.6.2
Release Date: 2009-7-7
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.30-ARCH i686
Current Operating System: Linux aina 2.6.30-ARCH #1 SMP PREEMPT Mon Jul 20 11:20:32 UTC 2009 i686
Build Date: 18 July 2009 08:27:13PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Jul 27 18:18:46 2009
(++) Using config file: "./xorg.conf.new"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(**) Option "DontZap" "false"
(**) Option "AllowEmptyInput" "off"
(==) Automatically adding devices
(==) Automatically enabling devices
(**) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1,
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1,
built-ins
(**) ModulePath set to "/usr/lib/xorg/modules"
(II) Loader magic: 0x7a40
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(--) using VT number 7
(--) PCI:*(0:1:0:0) 1002:7143:1043:01c6 ATI Technologies Inc RV505 [Radeon X1550 Series] rev 0, Mem @ 0xe0000000/268435456, 0xf5000000/65536, I/O @ 0x0000b000/256, BIOS @ 0x????????/131072
(--) PCI: (0:1:0:1) 1002:7163:1043:01c7 ATI Technologies Inc RV505 [Radeon X1550 Series] (Secondary) rev 0, Mem @ 0xf5010000/65536
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded by default.
(II) "record" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "ati"
(II) Loading /usr/lib/xorg/modules/drivers//ati_drv.so
(II) Module ati: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 6.12.2
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "radeon"
(II) Loading /usr/lib/xorg/modules/drivers//radeon_drv.so
(II) Module radeon: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 6.12.2
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.4.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.3.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(II) RADEON: Driver for ATI Radeon chipsets:
ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
ATI Radeon Mobility X300 (M24) 3152 (PCIE),
ATI FireGL M24 GL 3154 (PCIE), ATI Radeon X600 (RV380) 3E50 (PCIE),
ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
ATI Radeon 8500 AIW BB (AGP), ATI Radeon 8500 AIW BC (AGP),
ATI Radeon IGP320M (U1) 4336, ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
ATI Radeon X800PRO (R420) JI (AGP),
ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
ATI Radeon Mobility 9800 (M18) JN (AGP),
ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI FireGL Mobility 9000 (M9) Ld (AGP),
ATI Radeon Mobility 9000 (M9) Lf (AGP),
ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI Radeon 9700 Pro ND (AGP),
ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP),
ATI FireGL X1 NG (AGP), ATI Radeon 9800PRO NH (AGP),
ATI Radeon 9800 NI (AGP), ATI FireGL X2 NK (AGP),
ATI Radeon 9800XT NJ (AGP),
ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
ATI Radeon Mobility 9600 (M10) NQ (AGP),
ATI Radeon Mobility 9600 (M11) NR (AGP),
ATI Radeon Mobility 9600 (M10) NS (AGP),
ATI FireGL Mobility T2 (M10) NT (AGP),
ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
ATI Radeon Mobility X300 (M22) 5460 (PCIE),
ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
ATI Radeon X800PRO (R423) UI (PCIE),
ATI Radeon X800LE (R423) UJ (PCIE),
ATI Radeon X800SE (R423) UK (PCIE),
ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
ATI FireGL unknown (R423) UR (PCIE),
ATI FireGL unknown (R423) UT (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility Radeon X700 XL (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
ATI Radeon Mobility 9100 IGP (U3) 5835,
ATI Radeon XPRESS 200 5954 (PCIE),
ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
ATI Radeon XPRESS 200M 5975 (PCIE),
ATI Radeon XPRESS 200 5A41 (PCIE),
ATI Radeon XPRESS 200M 5A42 (PCIE),
ATI Radeon XPRESS 200 5A61 (PCIE),
ATI Radeon XPRESS 200M 5A62 (PCIE),
ATI Radeon X300 (RV370) 5B60 (PCIE),
ATI Radeon X600 (RV370) 5B62 (PCIE),
ATI Radeon X550 (RV370) 5B63 (PCIE),
ATI FireGL V3100 (RV370) 5B64 (PCIE),
ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
ATI Mobility Radeon X800 XT (M28) (PCIE),
ATI Mobility FireGL V5100 (M28) (PCIE),
ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
ATI Radeon X850 XT PE (R480) (PCIE),
ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
ATI Radeon X850 XT (R480) (PCIE),
ATI Radeon X800XT (R423) 5D57 (PCIE),
ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
ATI Radeon X700 PRO (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
ATI Mobility Radeon X1700, ATI Radeon X2300HD,
ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
ATI Radeon 4800 Series, ATI FirePro V8750 (FireGL),
ATI FirePro V7760 (FireGL), ATI Mobility RADEON HD 4850,
ATI Mobility RADEON HD 4850 X2, ATI Radeon 4800 Series,
ATI FirePro RV770, AMD FireStream 9270, AMD FireStream 9250,
ATI FirePro V8700 (FireGL), ATI Mobility RADEON HD 4870,
ATI Mobility RADEON M98, ATI Radeon 4800 Series,
ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98,
ATI Radeon RV730 (AGP), ATI FirePro M5750, ATI Radeon RV730 (AGP),
ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
ATI RV730 PRO [Radeon HD 4650], ATI FirePro V7750 (FireGL),
ATI FirePro V5700 (FireGL), ATI FirePro V3750 (FireGL), ATI RV610,
ATI Radeon HD 2400 XT, ATI Radeon HD 2400 Pro,
ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000, ATI RV610,
ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
ATI Mobility Radeon HD 3850 X2, ATI RV670,
ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
ATI Radeon RV710, ATI Radeon RV710, ATI Radeon HD 4350,
ATI Mobility Radeon 4300 Series, ATI Mobility Radeon 4500 Series,
ATI Mobility Radeon 4500 Series, ATI RV630,
ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
ATI FireGL V3600, ATI Radeon HD 2600 LE,
ATI Mobility FireGL Graphics Processor, ATI Radeon RV710,
ATI Radeon HD 3470, ATI Mobility Radeon HD 3430,
ATI Mobility Radeon HD 3400 Series, ATI Radeon HD 3450,
ATI Radeon HD 3450, ATI Radeon HD 3430, ATI Radeon HD 3450,
ATI FirePro V3700, ATI FireMV 2450, ATI FireMV 2260, ATI FireMV 2260,
ATI Radeon HD 3600 Series, ATI Radeon HD 3650 AGP,
ATI Radeon HD 3600 PRO, ATI Radeon HD 3600 XT,
ATI Radeon HD 3600 PRO, ATI Mobility Radeon HD 3650,
ATI Mobility Radeon HD 3670, ATI Mobility FireGL V5700,
ATI Mobility FireGL V5725, ATI Radeon HD 3200 Graphics,
ATI Radeon 3100 Graphics, ATI Radeon HD 3200 Graphics,
ATI Radeon 3100 Graphics, ATI Radeon HD 3300 Graphics,
ATI Radeon HD 3200 Graphics, ATI Radeon 3000 Graphics,
ATI Radeon HD Graphics, ATI Radeon Graphics,
ATI Mobility Radeon HD Graphics, ATI Mobility Radeon Graphics,
ATI Radeon Graphics
(II) Primary Device is: PCI 01@00:00:0
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Setting vga for screen 0.
(II) RADEON(0): TOTO SAYS 00000000f5000000
(II) RADEON(0): MMIO registers at 0x00000000f5000000: size 64KB
(II) RADEON(0): PCI bus 1 card 0 func 0
(==) RADEON(0): Depth 24, (--) framebuffer bpp 32
(II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) RADEON(0): Default visual is TrueColor
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 0.1.0
ABI class: X.Org Video Driver, version 5.0
(II) RADEON(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(==) RADEON(0): RGB weight 888
(II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
(--) RADEON(0): Chipset: "ATI Radeon X1550" (ChipID = 0x7143)
(WW) RADEON(0): R500 support is under development. Please report any issues to [email protected]
(--) RADEON(0): Linear framebuffer at 0x00000000e0000000
(II) RADEON(0): PCIE card detected
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 5.0
(II) RADEON(0): initializing int10
(II) RADEON(0): Primary V_BIOS segment is: 0xc000
(II) RADEON(0): ATOM BIOS detected
(II) RADEON(0): ATOM BIOS Rom:
SubsystemVendorID: 0x1043 SubsystemID: 0x01c6
IOBaseAddress: 0xb000
Filename: SV25429.bin
BIOS Bootup Message:
7143.9.13.1.29.AS01
(II) RADEON(0): Framebuffer space used by Firmware (kb): 20
(II) RADEON(0): Start of VRAM area used by Firmware: 0xfffb000
(II) RADEON(0): AtomBIOS requests 20kB of VRAM scratch space
(II) RADEON(0): AtomBIOS VRAM scratch base: 0xfffb000
(II) RADEON(0): Cannot get VRAM scratch space. Allocating in main memory instead
(II) RADEON(0): Default Engine Clock: 550000
(II) RADEON(0): Default Memory Clock: 400000
(II) RADEON(0): Maximum Pixel ClockPLL Frequency Output: 1100000
(II) RADEON(0): Minimum Pixel ClockPLL Frequency Output: 0
(II) RADEON(0): Maximum Pixel ClockPLL Frequency Input: 13500
(II) RADEON(0): Minimum Pixel ClockPLL Frequency Input: 1000
(II) RADEON(0): Maximum Pixel Clock: 400000
(II) RADEON(0): Reference Clock: 27000
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: drmOpenMinor returns 11
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) RADEON(0): [dri] Found DRI library version 1.3.0 and kernel module version 1.30.0
(==) RADEON(0): Page Flipping disabled on r5xx and newer chips.
(II) RADEON(0): Will try to use DMA for Xv image transfers
(II) RADEON(0): Generation 2 PCI interface, using max accessible memory
(II) RADEON(0): Detected total video RAM=262144K, accessible=262144K (PCI BAR=262144K)
(--) RADEON(0): Mapped VideoRAM: 262144 kByte (128 bit DDR SDRAM)
(II) RADEON(0): Color tiling enabled by default
(II) RADEON(0): Max desktop size set to 2560x1600
(II) RADEON(0): For a larger or smaller max desktop size, add a Virtual line to your xorg.conf
(II) RADEON(0): If you are having trouble with 3D, reduce the desktop size by adjusting the Virtual line to your xorg.conf
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) RADEON(0): ref_freq: 2700, min_out_pll: 64800, max_out_pll: 110000, min_in_pll: 100, max_in_pll: 1350, xclk: 40000, sclk: 550.000000, mclk: 400.000000
(II) RADEON(0): PLL parameters: rf=2700 rd=13 min=64800 max=110000; xclk=40000
(II) RADEON(0): Skipping TV-Out
(II) RADEON(0): Skipping Component Video
encoder: 0x15
encoder: 0x13
encoder: 0x16
(II) RADEON(0): Output VGA-0 using monitor section Monitor0
(II) RADEON(0): I2C bus "VGA-0" initialized.
(II) RADEON(0): Output DVI-0 has no monitor section
(II) RADEON(0): I2C bus "DVI-0" initialized.
(II) RADEON(0): Port0:
XRANDR name: VGA-0
Connector: VGA
CRT1: INTERNAL_KLDSCP_DAC1
DDC reg: 0x7e40
(II) RADEON(0): Port1:
XRANDR name: DVI-0
Connector: DVI-I
CRT2: INTERNAL_KLDSCP_DAC2
DFP1: INTERNAL_KLDSCP_TMDS1
DDC reg: 0x7e50
(II) RADEON(0): I2C device "VGA-0:E-EDID segment register" registered at address 0x60.
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): EDID vendor "ACR", prod id 1916
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 1
(II) RADEON(0): EDID data from the display on output: VGA-0 ----------------------
(II) RADEON(0): Manufacturer: ACR Model: 77c Serial#: 1764
(II) RADEON(0): Year: 2006 Week: 13
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
(II) RADEON(0): Sync: Separate Composite SyncOnGreen
(II) RADEON(0): Max Image Size [cm]: horiz.: 38 vert.: 30
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): DPMS capabilities: Off; RGB/Color Display
(II) RADEON(0): Default color space is primary color space
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.634 redY: 0.354 greenX: 0.287 greenY: 0.621
(II) RADEON(0): blueX: 0.138 blueY: 0.077 whiteX: 0.313 whiteY: 0.329
(II) RADEON(0): Supported established timings:
(II) RADEON(0): 720x400@70Hz
(II) RADEON(0): 640x480@60Hz
(II) RADEON(0): 640x480@67Hz
(II) RADEON(0): 640x480@72Hz
(II) RADEON(0): 640x480@75Hz
(II) RADEON(0): 800x600@56Hz
(II) RADEON(0): 800x600@60Hz
(II) RADEON(0): 800x600@72Hz
(II) RADEON(0): 800x600@75Hz
(II) RADEON(0): 832x624@75Hz
(II) RADEON(0): 1024x768@60Hz
(II) RADEON(0): 1024x768@70Hz
(II) RADEON(0): 1024x768@75Hz
(II) RADEON(0): 1280x1024@75Hz
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported standard timings:
(II) RADEON(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) RADEON(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 108.0 MHz Image Size: 376 x 301 mm
(II) RADEON(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) RADEON(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) RADEON(0): Ranges: V min: 56 V max: 75 Hz, H min: 31 H max: 81 kHz, PixClock max 140 MHz
(II) RADEON(0): Monitor name: AL1916
(II) RADEON(0): ACER
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff0004727c07e4060000
(II) RADEON(0): 0d1001030e261e782e6875a25a499f23
(II) RADEON(0): 135054bfef00714f8180010101010101
(II) RADEON(0): 010101010101302a009851002a403070
(II) RADEON(0): 1300782d1100001e000000fd00384b1f
(II) RADEON(0): 510e000a202020202020000000fc0041
(II) RADEON(0): 4c313931360a202020202020000000fe
(II) RADEON(0): 00414345520a202020202020202000b1
finished output detect: 0
(II) RADEON(0): I2C device "DVI-0:E-EDID segment register" registered at address 0x60.
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
Dac detection success
Unhandled monitor type 0
finished output detect: 1
finished all detect
before xf86InitialConfiguration
(II) RADEON(0): EDID vendor "ACR", prod id 1916
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 1
(II) RADEON(0): EDID data from the display on output: VGA-0 ----------------------
(II) RADEON(0): Manufacturer: ACR Model: 77c Serial#: 1764
(II) RADEON(0): Year: 2006 Week: 13
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
(II) RADEON(0): Sync: Separate Composite SyncOnGreen
(II) RADEON(0): Max Image Size [cm]: horiz.: 38 vert.: 30
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): DPMS capabilities: Off; RGB/Color Display
(II) RADEON(0): Default color space is primary color space
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.634 redY: 0.354 greenX: 0.287 greenY: 0.621
(II) RADEON(0): blueX: 0.138 blueY: 0.077 whiteX: 0.313 whiteY: 0.329
(II) RADEON(0): Supported established timings:
(II) RADEON(0): 720x400@70Hz
(II) RADEON(0): 640x480@60Hz
(II) RADEON(0): 640x480@67Hz
(II) RADEON(0): 640x480@72Hz
(II) RADEON(0): 640x480@75Hz
(II) RADEON(0): 800x600@56Hz
(II) RADEON(0): 800x600@60Hz
(II) RADEON(0): 800x600@72Hz
(II) RADEON(0): 800x600@75Hz
(II) RADEON(0): 832x624@75Hz
(II) RADEON(0): 1024x768@60Hz
(II) RADEON(0): 1024x768@70Hz
(II) RADEON(0): 1024x768@75Hz
(II) RADEON(0): 1280x1024@75Hz
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported standard timings:
(II) RADEON(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) RADEON(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 108.0 MHz Image Size: 376 x 301 mm
(II) RADEON(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) RADEON(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) RADEON(0): Ranges: V min: 56 V max: 75 Hz, H min: 31 H max: 81 kHz, PixClock max 140 MHz
(II) RADEON(0): Monitor name: AL1916
(II) RADEON(0): ACER
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff0004727c07e4060000
(II) RADEON(0): 0d1001030e261e782e6875a25a499f23
(II) RADEON(0): 135054bfef00714f8180010101010101
(II) RADEON(0): 010101010101302a009851002a403070
(II) RADEON(0): 1300782d1100001e000000fd00384b1f
(II) RADEON(0): 510e000a202020202020000000fc0041
(II) RADEON(0): 4c313931360a202020202020000000fe
(II) RADEON(0): 00414345520a202020202020202000b1
(II) RADEON(0): EDID vendor "ACR", prod id 1916
(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
Dac detection success
Unhandled monitor type 0
(II) RADEON(0): Output VGA-0 connected
(II) RADEON(0): Output DVI-0 disconnected
(II) RADEON(0): Using exact sizes for initial modes
(II) RADEON(0): Output VGA-0 using initial mode 1280x1024
after xf86InitialConfiguration
(**) RADEON(0): Display dimensions: (380, 300) mm
(**) RADEON(0): DPI set to (85, 108)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(==) RADEON(0): Using gamma correction (1.0, 1.0, 1.0)
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(==) RADEON(0): Using XAA acceleration architecture
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.2.1
ABI class: X.Org Video Driver, version 5.0
(!!) RADEON(0): For information on using the multimedia capabilities
of this adapter, please see http://gatos.sf.net.
(!!) RADEON(0): MergedFB support has been removed and replaced with xrandr 1.2 support
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprU)
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprU)
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprU)
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(II) RADEON(0): RADEONScreenInit e0000000 0 0
Output CRT1 disable success
Blank CRTC 0 success
Disable CRTC 0 success
Blank CRTC 1 success
Disable CRTC 1 success
(==) RADEON(0): Using 24 bit depth buffer
(II) RADEON(0): RADEONInitMemoryMap() :
(II) RADEON(0): mem_size : 0x10000000
(II) RADEON(0): MC_FB_LOCATION : 0xefffe000
(II) RADEON(0): MC_AGP_LOCATION : 0x003f0000
(II) RADEON(0): Depth moves disabled by default
(II) RADEON(0): Using 32 MB GART aperture
(II) RADEON(0): Using 1 MB for the ring buffer
(II) RADEON(0): Using 2 MB for vertex/indirect buffers
(II) RADEON(0): Using 29 MB for GART textures
(II) RADEON(0): Memory manager initialized to (0,0) (1280,8191)
(II) RADEON(0): Reserved area from (0,1280) to (1280,1282)
(II) RADEON(0): Largest offscreen area available: 1280 x 6909
(II) RADEON(0): Will use front buffer at offset 0x0
(II) RADEON(0): Will use back buffer at offset 0x1b80000
(II) RADEON(0): Will use depth buffer at offset 0x21c0000
(II) RADEON(0): Will use 32 kb for PCI GART table at offset 0xfff8000
(II) RADEON(0): Will use 221184 kb for textures at offset 0x2800000
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: drmOpenMinor returns 11
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) RADEON(0): [drm] Using the DRM lock SAREA also for drawables.
(II) RADEON(0): [drm] framebuffer handle = 0xe0000000
(II) RADEON(0): [drm] added 1 reserved context for kernel
(II) RADEON(0): X context handle = 0x1
(II) RADEON(0): [drm] installed DRM signal handler
(II) RADEON(0): [pci] 32768 kB allocated with handle 0xf93c5000
(II) RADEON(0): [pci] ring handle = 0xf93c5000
(II) RADEON(0): [pci] Ring mapped at 0xa765d000
(II) RADEON(0): [pci] Ring contents 0x00000000
(II) RADEON(0): [pci] ring read ptr handle = 0xf94c6000
(II) RADEON(0): [pci] Ring read ptr mapped at 0xb792c000
(II) RADEON(0): [pci] Ring read ptr contents 0x00000000
(II) RADEON(0): [pci] vertex/indirect buffers handle = 0xf94c7000
(II) RADEON(0): [pci] Vertex/indirect buffers mapped at 0xa745d000
(II) RADEON(0): [pci] Vertex/indirect buffers contents 0x00000000
(II) RADEON(0): [pci] GART texture map handle = 0xf96c7000
(II) RADEON(0): [pci] GART Texture map mapped at 0xa57dd000
(II) RADEON(0): [drm] register handle = 0x2ea00000
(II) RADEON(0): [dri] Visual configs initialized
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0): MC_FB_LOCATION : 0xefffe000 0xefffe000
(II) RADEON(0): MC_AGP_LOCATION : 0x003f0000
(==) RADEON(0): Backing store disabled
(II) RADEON(0): [DRI] installation complete
(II) RADEON(0): [drm] Added 32 65536 byte vertex/indirect buffers
(II) RADEON(0): [drm] Mapped 32 vertex/indirect buffers
(II) RADEON(0): [drm] dma control initialized, using IRQ 16
(II) RADEON(0): [drm] Initialized kernel GART heap manager, 29884416
(WW) RADEON(0): DRI init changed memory map, adjusting ...
(WW) RADEON(0): MC_FB_LOCATION was: 0xefffe000 is: 0xefffe000
(WW) RADEON(0): MC_AGP_LOCATION was: 0x003f0000 is: 0xffffffc0
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0): MC_FB_LOCATION : 0xefffe000 0xefffe000
(II) RADEON(0): MC_AGP_LOCATION : 0xffffffc0
(II) RADEON(0): Direct rendering enabled
(II) RADEON(0): XAA Render acceleration unsupported on Radeon 9500/9700 and newer. Please use EXA instead.
(II) RADEON(0): Render acceleration disabled
(II) RADEON(0): num quad-pipes is 1
(II) RADEON(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Lines
Scanline Image Writes
Setting up tile and stipple cache:
32 128x128 slots
32 256x256 slots
16 512x512 slots
(II) RADEON(0): Acceleration enabled
(**) Option "dpms"
(**) RADEON(0): DPMS enabled
(==) RADEON(0): Silken mouse enabled
(II) RADEON(0): Will use 32 kb for hardware cursor 0 at offset 0x00643000
(II) RADEON(0): Will use 32 kb for hardware cursor 1 at offset 0x00648000
(II) RADEON(0): Largest offscreen area available: 1280 x 6901
(II) RADEON(0): Set up textured video
Output CRT1 disable success
Blank CRTC 0 success
Disable CRTC 0 success
Blank CRTC 1 success
Disable CRTC 1 success
Output CRT1 disable success
Mode 1280x1024 - 1688 1066 5
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0): MC_FB_LOCATION : 0xefffe000 0xefffe000
(II) RADEON(0): MC_AGP_LOCATION : 0xffffffc0
freq: 108000000
best_freq: 108000000
best_feedback_div: 48
best_ref_div: 2
best_post_div: 6
(II) RADEON(0): crtc(0) Clock: mode 108000, PLL 108000
(II) RADEON(0): crtc(0) PLL : refdiv 2, fbdiv 0x30(48), pdiv 6
Set CRTC 0 PLL success
Set CRTC Timing success
Set CRTC 0 Overscan success
Not using RMX
scaler 0 setup success
Set CRTC 0 Source success
crtc 0 YUV disable setup success
Output DAC1 setup success
Enable CRTC 0 success
Unblank CRTC 0 success
Output CRT1 enable success
Blank CRTC 1 success
Disable CRTC 1 success
(II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: Screen 0 is not DRI2 capable
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 12, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 12, (OK)
drmOpenByBusid: drmOpenMinor returns 12
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_make_current_read
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: enabled GLX_texture_from_pixmap with driver support
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/r300_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) RADEON(0): Setting screen physical size to 376 x 301
(**) Option "Protocol" "auto"
(**) Option "Device" "/dev/input/mice"
(II) Mouse0: Setting mouse protocol to "ExplorerPS/2"
(**) Mouse0: Device: "/dev/input/mice"
(**) Mouse0: Protocol: "auto"
(**) Option "CorePointer"
(**) Mouse0: always reports core events
(**) Option "Device" "/dev/input/mice"
(==) Mouse0: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5 6 7"
(**) Mouse0: ZAxisMapping: buttons 4, 5, 6 and 7
(**) Mouse0: Buttons: 11
(**) Mouse0: Sensitivity: 1
(II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
(**) Mouse0: (accel) keeping acceleration scheme 1
(**) Mouse0: (accel) filter chain progression: 2.00
(**) Mouse0: (accel) filter stage 0: 20.00 ms
(**) Mouse0: (accel) set acceleration profile 0
(II) Mouse0: Setting mouse protocol to "ExplorerPS/2"
(II) Mouse0: ps2EnableDataReporting: succeeded
(**) Option "CoreKeyboard"
(**) Keyboard0: always reports core events
(**) Option "Protocol" "standard"
(**) Keyboard0: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard0: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Keyboard0: XkbModel: "pc105"
(**) Option "XkbLayout" "us"
(**) Keyboard0: XkbLayout: "us"
(**) Option "CustomKeycodes" "off"
(**) Keyboard0: CustomKeycodes disabled
(II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
(II) config/hal: Adding input device Macintosh mouse button emulation
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 2.2.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
(**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
(**) Macintosh mouse button emulation: (accel) set acceleration profile 0
(II) config/hal: Adding input device ImExPS/2 Logitech Explorer Mouse
(**) ImExPS/2 Logitech Explorer Mouse: always reports core events
(**) ImExPS/2 Logitech Explorer Mouse: Device: "/dev/input/event6"
(II) ImExPS/2 Logitech Explorer Mouse: Found 5 mouse buttons
(II) ImExPS/2 Logitech Explorer Mouse: Found x and y relative axes
(II) ImExPS/2 Logitech Explorer Mouse: Found scroll wheel(s)
(II) ImExPS/2 Logitech Explorer Mouse: Configuring as mouse
(**) ImExPS/2 Logitech Explorer Mouse: YAxisMapping: buttons 4 and 5
(**) ImExPS/2 Logitech Explorer Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "ImExPS/2 Logitech Explorer Mouse" (type: MOUSE)
(**) ImExPS/2 Logitech Explorer Mouse: (accel) keeping acceleration scheme 1
(**) ImExPS/2 Logitech Explorer Mouse: (accel) filter chain progression: 2.00
(**) ImExPS/2 Logitech Explorer Mouse: (accel) filter stage 0: 20.00 ms
(**) ImExPS/2 Logitech Explorer Mouse: (accel) set acceleration profile 0
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) AIGLX: Suspending AIGLX clients for VT switch
Output CRT1 disable success
Blank CRTC 0 success
Disable CRTC 0 success
Blank CRTC 1 success
Disable CRTC 1 success
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0): MC_FB_LOCATION : 0xefffe000 0xefffe000
(II) RADEON(0): MC_AGP_LOCATION : 0x003f0000
(II) RADEON(0): avivo_restore !
Enable CRTC 0 success
Unblank CRTC 0 success
(II) AT Translated Set 2 keyboard: Close
(II) UnloadModule: "evdev"
(II) ImExPS/2 Logitech Explorer Mouse: Close
(II) UnloadModule: "evdev"
(II) Macintosh mouse button emulation: Close
(II) UnloadModule: "evdev"
(II) UnloadModule: "kbd"
(II) UnloadModule: "mouse"
(II) RADEON(0): [drm] removed 1 reserved context for kernel
(II) RADEON(0): [drm] unmapping 8192 bytes of SAREA 0xf802f000 at 0xb792d000
(II) RADEON(0): [drm] Closed DRM master.
Last edited by edenxavier (2009-07-28 22:33:44)

Did like you said, however it didn't work. It complained this time about not having the fbdev available. It's not installed because I didn't think it was related. Here's the new Xorg.log.0 file:
X.Org X Server 1.6.2
Release Date: 2009-7-7
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.30-ARCH i686
Current Operating System: Linux aina 2.6.30-ARCH #1 SMP PREEMPT Mon Jul 20 11:20:32 UTC 2009 i686
Build Date: 18 July 2009 08:27:13PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Jul 27 23:20:52 2009
(II) Loader magic: 0x7a40
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(--) using VT number 7
(--) PCI:*(0:1:0:0) 1002:7143:1043:01c6 ATI Technologies Inc RV505 [Radeon X1550 Series] rev 0, Mem @ 0xe0000000/268435456, 0xf5000000/65536, I/O @ 0x0000b000/256, BIOS @ 0x????????/131072
(--) PCI: (0:1:0:1) 1002:7163:1043:01c7 ATI Technologies Inc RV505 [Radeon X1550 Series] (Secondary) rev 0, Mem @ 0xf5010000/65536
(==) Using default built-in configuration (30 lines)
(==) --- Start of built-in configuration ---
Section "Device"
Identifier "Builtin Default ati Device 0"
Driver "ati"
EndSection
Section "Screen"
Identifier "Builtin Default ati Screen 0"
Device "Builtin Default ati Device 0"
EndSection
Section "Device"
Identifier "Builtin Default vesa Device 0"
Driver "vesa"
EndSection
Section "Screen"
Identifier "Builtin Default vesa Screen 0"
Device "Builtin Default vesa Device 0"
EndSection
Section "Device"
Identifier "Builtin Default fbdev Device 0"
Driver "fbdev"
EndSection
Section "Screen"
Identifier "Builtin Default fbdev Screen 0"
Device "Builtin Default fbdev Device 0"
EndSection
Section "ServerLayout"
Identifier "Builtin Default Layout"
Screen "Builtin Default ati Screen 0"
Screen "Builtin Default vesa Screen 0"
Screen "Builtin Default fbdev Screen 0"
EndSection
(==) --- End of built-in configuration ---
(==) ServerLayout "Builtin Default Layout"
(**) |-->Screen "Builtin Default ati Screen 0" (0)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default ati Device 0"
(==) No monitor specified for screen "Builtin Default ati Screen 0".
Using a default monitor configuration.
(**) |-->Screen "Builtin Default vesa Screen 0" (1)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default vesa Device 0"
(==) No monitor specified for screen "Builtin Default vesa Screen 0".
Using a default monitor configuration.
(**) |-->Screen "Builtin Default fbdev Screen 0" (2)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default fbdev Device 0"
(==) No monitor specified for screen "Builtin Default fbdev Screen 0".
Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
If no devices become available, reconfigure HAL or disable AllowEmptyInput.
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "ati"
(II) Loading /usr/lib/xorg/modules/drivers//ati_drv.so
(II) Module ati: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 6.12.2
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "radeon"
(II) Loading /usr/lib/xorg/modules/drivers//radeon_drv.so
(II) Module radeon: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 6.12.2
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "vesa"
(II) Loading /usr/lib/xorg/modules/drivers//vesa_drv.so
(II) Module vesa: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 2.2.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "fbdev"
(WW) Warning, couldn't open module fbdev
(II) UnloadModule: "fbdev"
(EE) Failed to load module "fbdev" (module does not exist, 0)
(II) RADEON: Driver for ATI Radeon chipsets:
ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
ATI Radeon Mobility X300 (M24) 3152 (PCIE),
ATI FireGL M24 GL 3154 (PCIE), ATI Radeon X600 (RV380) 3E50 (PCIE),
ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
ATI Radeon 8500 AIW BB (AGP), ATI Radeon 8500 AIW BC (AGP),
ATI Radeon IGP320M (U1) 4336, ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
ATI Radeon X800PRO (R420) JI (AGP),
ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
ATI Radeon Mobility 9800 (M18) JN (AGP),
ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI FireGL Mobility 9000 (M9) Ld (AGP),
ATI Radeon Mobility 9000 (M9) Lf (AGP),
ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI Radeon 9700 Pro ND (AGP),
ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP),
ATI FireGL X1 NG (AGP), ATI Radeon 9800PRO NH (AGP),
ATI Radeon 9800 NI (AGP), ATI FireGL X2 NK (AGP),
ATI Radeon 9800XT NJ (AGP),
ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
ATI Radeon Mobility 9600 (M10) NQ (AGP),
ATI Radeon Mobility 9600 (M11) NR (AGP),
ATI Radeon Mobility 9600 (M10) NS (AGP),
ATI FireGL Mobility T2 (M10) NT (AGP),
ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
ATI Radeon Mobility X300 (M22) 5460 (PCIE),
ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
ATI Radeon X800PRO (R423) UI (PCIE),
ATI Radeon X800LE (R423) UJ (PCIE),
ATI Radeon X800SE (R423) UK (PCIE),
ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
ATI FireGL unknown (R423) UR (PCIE),
ATI FireGL unknown (R423) UT (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility Radeon X700 XL (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
ATI Radeon Mobility 9100 IGP (U3) 5835,
ATI Radeon XPRESS 200 5954 (PCIE),
ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
ATI Radeon XPRESS 200M 5975 (PCIE),
ATI Radeon XPRESS 200 5A41 (PCIE),
ATI Radeon XPRESS 200M 5A42 (PCIE),
ATI Radeon XPRESS 200 5A61 (PCIE),
ATI Radeon XPRESS 200M 5A62 (PCIE),
ATI Radeon X300 (RV370) 5B60 (PCIE),
ATI Radeon X600 (RV370) 5B62 (PCIE),
ATI Radeon X550 (RV370) 5B63 (PCIE),
ATI FireGL V3100 (RV370) 5B64 (PCIE),
ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
ATI Mobility Radeon X800 XT (M28) (PCIE),
ATI Mobility FireGL V5100 (M28) (PCIE),
ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
ATI Radeon X850 XT PE (R480) (PCIE),
ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
ATI Radeon X850 XT (R480) (PCIE),
ATI Radeon X800XT (R423) 5D57 (PCIE),
ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
ATI Radeon X700 PRO (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
ATI Mobility Radeon X1700, ATI Radeon X2300HD,
ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
ATI Radeon 4800 Series, ATI FirePro V8750 (FireGL),
ATI FirePro V7760 (FireGL), ATI Mobility RADEON HD 4850,
ATI Mobility RADEON HD 4850 X2, ATI Radeon 4800 Series,
ATI FirePro RV770, AMD FireStream 9270, AMD FireStream 9250,
ATI FirePro V8700 (FireGL), ATI Mobility RADEON HD 4870,
ATI Mobility RADEON M98, ATI Radeon 4800 Series,
ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98,
ATI Radeon RV730 (AGP), ATI FirePro M5750, ATI Radeon RV730 (AGP),
ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
ATI RV730 PRO [Radeon HD 4650], ATI FirePro V7750 (FireGL),
ATI FirePro V5700 (FireGL), ATI FirePro V3750 (FireGL), ATI RV610,
ATI Radeon HD 2400 XT, ATI Radeon HD 2400 Pro,
ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000, ATI RV610,
ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
ATI Mobility Radeon HD 3850 X2, ATI RV670,
ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
ATI Radeon RV710, ATI Radeon RV710, ATI Radeon HD 4350,
ATI Mobility Radeon 4300 Series, ATI Mobility Radeon 4500 Series,
ATI Mobility Radeon 4500 Series, ATI RV630,
ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
ATI FireGL V3600, ATI Radeon HD 2600 LE,
ATI Mobility FireGL Graphics Processor, ATI Radeon RV710,
ATI Radeon HD 3470, ATI Mobility Radeon HD 3430,
ATI Mobility Radeon HD 3400 Series, ATI Radeon HD 3450,
ATI Radeon HD 3450, ATI Radeon HD 3430, ATI Radeon HD 3450,
ATI FirePro V3700, ATI FireMV 2450, ATI FireMV 2260, ATI FireMV 2260,
ATI Radeon HD 3600 Series, ATI Radeon HD 3650 AGP,
ATI Radeon HD 3600 PRO, ATI Radeon HD 3600 XT,
ATI Radeon HD 3600 PRO, ATI Mobility Radeon HD 3650,
ATI Mobility Radeon HD 3670, ATI Mobility FireGL V5700,
ATI Mobility FireGL V5725, ATI Radeon HD 3200 Graphics,
ATI Radeon 3100 Graphics, ATI Radeon HD 3200 Graphics,
ATI Radeon 3100 Graphics, ATI Radeon HD 3300 Graphics,
ATI Radeon HD 3200 Graphics, ATI Radeon 3000 Graphics,
ATI Radeon HD Graphics, ATI Radeon Graphics,
ATI Mobility Radeon HD Graphics, ATI Mobility Radeon Graphics,
ATI Radeon Graphics
(II) VESA: driver for VESA chipsets: vesa
(II) Primary Device is: PCI 01@00:00:0
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(WW) Falling back to old probe method for vesa
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Setting vga for screen 0.
(II) RADEON(0): TOTO SAYS 00000000f5000000
(II) RADEON(0): MMIO registers at 0x00000000f5000000: size 64KB
(II) RADEON(0): PCI bus 1 card 0 func 0
(II) RADEON(0): Creating default Display subsection in Screen section
"Builtin Default ati Screen 0" for depth/fbbpp 24/32
(==) RADEON(0): Depth 24, (--) framebuffer bpp 32
(II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) RADEON(0): Default visual is TrueColor
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 0.1.0
ABI class: X.Org Video Driver, version 5.0
(II) RADEON(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(==) RADEON(0): RGB weight 888
(II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
(--) RADEON(0): Chipset: "ATI Radeon X1550" (ChipID = 0x7143)
(WW) RADEON(0): R500 support is under development. Please report any issues to [email protected]
(--) RADEON(0): Linear framebuffer at 0x00000000e0000000
(II) RADEON(0): PCIE card detected
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 5.0
(II) RADEON(0): initializing int10
(II) RADEON(0): Primary V_BIOS segment is: 0xc000
(II) RADEON(0): ATOM BIOS detected
(II) RADEON(0): ATOM BIOS Rom:
SubsystemVendorID: 0x1043 SubsystemID: 0x01c6
IOBaseAddress: 0xb000
Filename: SV25429.bin
BIOS Bootup Message:
7143.9.13.1.29.AS01
(II) RADEON(0): Framebuffer space used by Firmware (kb): 20
(II) RADEON(0): Start of VRAM area used by Firmware: 0xfffb000
(II) RADEON(0): AtomBIOS requests 20kB of VRAM scratch space
(II) RADEON(0): AtomBIOS VRAM scratch base: 0xfffb000
(II) RADEON(0): Cannot get VRAM scratch space. Allocating in main memory instead
(II) RADEON(0): Default Engine Clock: 550000
(II) RADEON(0): Default Memory Clock: 400000
(II) RADEON(0): Maximum Pixel ClockPLL Frequency Output: 1100000
(II) RADEON(0): Minimum Pixel ClockPLL Frequency Output: 0
(II) RADEON(0): Maximum Pixel ClockPLL Frequency Input: 13500
(II) RADEON(0): Minimum Pixel ClockPLL Frequency Input: 1000
(II) RADEON(0): Maximum Pixel Clock: 400000
(II) RADEON(0): Reference Clock: 27000
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: drmOpenMinor returns 11
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) RADEON(0): [dri] Found DRI library version 1.3.0 and kernel module version 1.30.0
(==) RADEON(0): Page Flipping disabled on r5xx and newer chips.
(II) RADEON(0): Will try to use DMA for Xv image transfers
(II) RADEON(0): Generation 2 PCI interface, using max accessible memory
(II) RADEON(0): Detected total video RAM=262144K, accessible=262144K (PCI BAR=262144K)
(--) RADEON(0): Mapped VideoRAM: 262144 kByte (128 bit DDR SDRAM)
(II) RADEON(0): Color tiling enabled by default
(II) RADEON(0): Max desktop size set to 2560x1600
(II) RADEON(0): For a larger or smaller max desktop size, add a Virtual line to your xorg.conf
(II) RADEON(0): If you are having trouble with 3D, reduce the desktop size by adjusting the Virtual line to your xorg.conf
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) RADEON(0): ref_freq: 2700, min_out_pll: 64800, max_out_pll: 110000, min_in_pll: 100, max_in_pll: 1350, xclk: 40000, sclk: 550.000000, mclk: 400.000000
(II) RADEON(0): PLL parameters: rf=2700 rd=13 min=64800 max=110000; xclk=40000
(II) RADEON(0): Skipping TV-Out
(II) RADEON(0): Skipping Component Video
encoder: 0x15
encoder: 0x13
encoder: 0x16
(II) RADEON(0): Output VGA-0 has no monitor section
(II) RADEON(0): I2C bus "VGA-0" initialized.
(II) RADEON(0): Output DVI-0 has no monitor section
(II) RADEON(0): I2C bus "DVI-0" initialized.
(II) RADEON(0): Port0:
XRANDR name: VGA-0
Connector: VGA
CRT1: INTERNAL_KLDSCP_DAC1
DDC reg: 0x7e40
(II) RADEON(0): Port1:
XRANDR name: DVI-0
Connector: DVI-I
CRT2: INTERNAL_KLDSCP_DAC2
DFP1: INTERNAL_KLDSCP_TMDS1
DDC reg: 0x7e50
(II) RADEON(0): I2C device "VGA-0:E-EDID segment register" registered at address 0x60.
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): EDID vendor "ACR", prod id 1916
(II) RADEON(0): Using EDID range info for horizontal sync
(II) RADEON(0): Using EDID range info for vertical refresh
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 1
(II) RADEON(0): EDID data from the display on output: VGA-0 ----------------------
(II) RADEON(0): Manufacturer: ACR Model: 77c Serial#: 1764
(II) RADEON(0): Year: 2006 Week: 13
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
(II) RADEON(0): Sync: Separate Composite SyncOnGreen
(II) RADEON(0): Max Image Size [cm]: horiz.: 38 vert.: 30
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): DPMS capabilities: Off; RGB/Color Display
(II) RADEON(0): Default color space is primary color space
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.634 redY: 0.354 greenX: 0.287 greenY: 0.621
(II) RADEON(0): blueX: 0.138 blueY: 0.077 whiteX: 0.313 whiteY: 0.329
(II) RADEON(0): Supported established timings:
(II) RADEON(0): 720x400@70Hz
(II) RADEON(0): 640x480@60Hz
(II) RADEON(0): 640x480@67Hz
(II) RADEON(0): 640x480@72Hz
(II) RADEON(0): 640x480@75Hz
(II) RADEON(0): 800x600@56Hz
(II) RADEON(0): 800x600@60Hz
(II) RADEON(0): 800x600@72Hz
(II) RADEON(0): 800x600@75Hz
(II) RADEON(0): 832x624@75Hz
(II) RADEON(0): 1024x768@60Hz
(II) RADEON(0): 1024x768@70Hz
(II) RADEON(0): 1024x768@75Hz
(II) RADEON(0): 1280x1024@75Hz
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported standard timings:
(II) RADEON(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) RADEON(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 108.0 MHz Image Size: 376 x 301 mm
(II) RADEON(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) RADEON(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) RADEON(0): Ranges: V min: 56 V max: 75 Hz, H min: 31 H max: 81 kHz, PixClock max 140 MHz
(II) RADEON(0): Monitor name: AL1916
(II) RADEON(0): ACER
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff0004727c07e4060000
(II) RADEON(0): 0d1001030e261e782e6875a25a499f23
(II) RADEON(0): 135054bfef00714f8180010101010101
(II) RADEON(0): 010101010101302a009851002a403070
(II) RADEON(0): 1300782d1100001e000000fd00384b1f
(II) RADEON(0): 510e000a202020202020000000fc0041
(II) RADEON(0): 4c313931360a202020202020000000fe
(II) RADEON(0): 00414345520a202020202020202000b1
finished output detect: 0
(II) RADEON(0): I2C device "DVI-0:E-EDID segment register" registered at address 0x60.
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
Dac detection success
Unhandled monitor type 0
finished output detect: 1
finished all detect
before xf86InitialConfiguration
(II) RADEON(0): EDID vendor "ACR", prod id 1916
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 1
(II) RADEON(0): EDID data from the display on output: VGA-0 ----------------------
(II) RADEON(0): Manufacturer: ACR Model: 77c Serial#: 1764
(II) RADEON(0): Year: 2006 Week: 13
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
(II) RADEON(0): Sync: Separate Composite SyncOnGreen
(II) RADEON(0): Max Image Size [cm]: horiz.: 38 vert.: 30
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): DPMS capabilities: Off; RGB/Color Display
(II) RADEON(0): Default color space is primary color space
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.634 redY: 0.354 greenX: 0.287 greenY: 0.621
(II) RADEON(0): blueX: 0.138 blueY: 0.077 whiteX: 0.313 whiteY: 0.329
(II) RADEON(0): Supported established timings:
(II) RADEON(0): 720x400@70Hz
(II) RADEON(0): 640x480@60Hz
(II) RADEON(0): 640x480@67Hz
(II) RADEON(0): 640x480@72Hz
(II) RADEON(0): 640x480@75Hz
(II) RADEON(0): 800x600@56Hz
(II) RADEON(0): 800x600@60Hz
(II) RADEON(0): 800x600@72Hz
(II) RADEON(0): 800x600@75Hz
(II) RADEON(0): 832x624@75Hz
(II) RADEON(0): 1024x768@60Hz
(II) RADEON(0): 1024x768@70Hz
(II) RADEON(0): 1024x768@75Hz
(II) RADEON(0): 1280x1024@75Hz
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported standard timings:
(II) RADEON(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) RADEON(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 108.0 MHz Image Size: 376 x 301 mm
(II) RADEON(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) RADEON(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) RADEON(0): Ranges: V min: 56 V max: 75 Hz, H min: 31 H max: 81 kHz, PixClock max 140 MHz
(II) RADEON(0): Monitor name: AL1916
(II) RADEON(0): ACER
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff0004727c07e4060000
(II) RADEON(0): 0d1001030e261e782e6875a25a499f23
(II) RADEON(0): 135054bfef00714f8180010101010101
(II) RADEON(0): 010101010101302a009851002a403070
(II) RADEON(0): 1300782d1100001e000000fd00384b1f
(II) RADEON(0): 510e000a202020202020000000fc0041
(II) RADEON(0): 4c313931360a202020202020000000fe
(II) RADEON(0): 00414345520a202020202020202000b1
(II) RADEON(0): EDID vendor "ACR", prod id 1916
(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
Dac detection success
Unhandled monitor type 0
(II) RADEON(0): Output VGA-0 connected
(II) RADEON(0): Output DVI-0 disconnected
(II) RADEON(0): Using exact sizes for initial modes
(II) RADEON(0): Output VGA-0 using initial mode 1280x1024
after xf86InitialConfiguration
(**) RADEON(0): Display dimensions: (380, 300) mm
(**) RADEON(0): DPI set to (85, 108)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(==) RADEON(0): Using gamma correction (1.0, 1.0, 1.0)
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(==) RADEON(0): Using XAA acceleration architecture
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.2.1
ABI class: X.Org Video Driver, version 5.0
(!!) RADEON(0): For information on using the multimedia capabilities
of this adapter, please see http://gatos.sf.net.
(!!) RADEON(0): MergedFB support has been removed and replaced with xrandr 1.2 support
(II) UnloadModule: "vesa"
(II) Unloading /usr/lib/xorg/modules/drivers//vesa_drv.so
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprU)
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprU)
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprU)
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(II) RADEON(0): RADEONScreenInit e0000000 0 0
Output CRT1 disable success
Blank CRTC 0 success
Disable CRTC 0 success
Blank CRTC 1 success
Disable CRTC 1 success
(==) RADEON(0): Using 24 bit depth buffer
(II) RADEON(0): RADEONInitMemoryMap() :
(II) RADEON(0): mem_size : 0x10000000
(II) RADEON(0): MC_FB_LOCATION : 0xefffe000
(II) RADEON(0): MC_AGP_LOCATION : 0x003f0000
(II) RADEON(0): Depth moves disabled by default
(II) RADEON(0): Using 32 MB GART aperture
(II) RADEON(0): Using 1 MB for the ring buffer
(II) RADEON(0): Using 2 MB for vertex/indirect buffers
(II) RADEON(0): Using 29 MB for GART textures
(II) RADEON(0): Memory manager initialized to (0,0) (1280,8191)
(II) RADEON(0): Reserved area from (0,1280) to (1280,1282)
(II) RADEON(0): Largest offscreen area available: 1280 x 6909
(II) RADEON(0): Will use front buffer at offset 0x0
(II) RADEON(0): Will use back buffer at offset 0x1b80000
(II) RADEON(0): Will use depth buffer at offset 0x21c0000
(II) RADEON(0): Will use 32 kb for PCI GART table at offset 0xfff8000
(II) RADEON(0): Will use 221184 kb for textures at offset 0x2800000
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: drmOpenMinor returns 11
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) RADEON(0): [drm] Using the DRM lock SAREA also for drawables.
(II) RADEON(0): [drm] framebuffer handle = 0xe0000000
(II) RADEON(0): [drm] added 1 reserved context for kernel
(II) RADEON(0): X context handle = 0x1
(II) RADEON(0): [drm] installed DRM signal handler
(II) RADEON(0): [pci] 32768 kB allocated with handle 0xf93e3000
(II) RADEON(0): [pci] ring handle = 0xf93e3000
(II) RADEON(0): [pci] Ring mapped at 0xb77ac000
(II) RADEON(0): [pci] Ring contents 0x00000000
(II) RADEON(0): [pci] ring read ptr handle = 0xf94e4000
(II) RADEON(0): [pci] Ring read ptr mapped at 0xb799f000
(II) RADEON(0): [pci] Ring read ptr contents 0x00000000
(II) RADEON(0): [pci] vertex/indirect buffers handle = 0xf94e5000
(II) RADEON(0): [pci] Vertex/indirect buffers mapped at 0xa74dc000
(II) RADEON(0): [pci] Vertex/indirect buffers contents 0x00000000
(II) RADEON(0): [pci] GART texture map handle = 0xf96e5000
(II) RADEON(0): [pci] GART Texture map mapped at 0xa585c000
(II) RADEON(0): [drm] register handle = 0x2ea00000
(II) RADEON(0): [dri] Visual configs initialized
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0): MC_FB_LOCATION : 0xefffe000 0xefffe000
(II) RADEON(0): MC_AGP_LOCATION : 0x003f0000
(==) RADEON(0): Backing store disabled
(II) RADEON(0): [DRI] installation complete
(II) RADEON(0): [drm] Added 32 65536 byte vertex/indirect buffers
(II) RADEON(0): [drm] Mapped 32 vertex/indirect buffers
(II) RADEON(0): [drm] dma control initialized, using IRQ 16
(II) RADEON(0): [drm] Initialized kernel GART heap manager, 29884416
(WW) RADEON(0): DRI init changed memory map, adjusting ...
(WW) RADEON(0): MC_FB_LOCATION was: 0xefffe000 is: 0xefffe000
(WW) RADEON(0): MC_AGP_LOCATION was: 0x003f0000 is: 0xffffffc0
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0): MC_FB_LOCATION : 0xefffe000 0xefffe000
(II) RADEON(0): MC_AGP_LOCATION : 0xffffffc0
(II) RADEON(0): Direct rendering enabled
(II) RADEON(0): XAA Render acceleration unsupported on Radeon 9500/9700 and newer. Please use EXA instead.
(II) RADEON(0): Render acceleration disabled
(II) RADEON(0): num quad-pipes is 1
(II) RADEON(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Lines
Scanline Image Writes
Setting up tile and stipple cache:
32 128x128 slots
32 256x256 slots
16 512x512 slots
(II) RADEON(0): Acceleration enabled
(II) RADEON(0): DPMS enabled
(==) RADEON(0): Silken mouse enabled
(II) RADEON(0): Will use 32 kb for hardware cursor 0 at offset 0x00643000
(II) RADEON(0): Will use 32 kb for hardware cursor 1 at offset 0x00648000
(II) RADEON(0): Largest offscreen area available: 1280 x 6901
(II) RADEON(0): Set up textured video
Output CRT1 disable success
Blank CRTC 0 success
Disable CRTC 0 success
Blank CRTC 1 success
Disable CRTC 1 success
Output CRT1 disable success
Mode 1280x1024 - 1688 1066 5
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0): MC_FB_LOCATION : 0xefffe000 0xefffe000
(II) RADEON(0): MC_AGP_LOCATION : 0xffffffc0
freq: 108000000
best_freq: 108000000
best_feedback_div: 48
best_ref_div: 2
best_post_div: 6
(II) RADEON(0): crtc(0) Clock: mode 108000, PLL 108000
(II) RADEON(0): crtc(0) PLL : refdiv 2, fbdiv 0x30(48), pdiv 6
Set CRTC 0 PLL success
Set CRTC Timing success
Set CRTC 0 Overscan success
Not using RMX
scaler 0 setup success
Set CRTC 0 Source success
crtc 0 YUV disable setup success
Output DAC1 setup success
Enable CRTC 0 success
Unblank CRTC 0 success
Output CRT1 enable success
Blank CRTC 1 success
Disable CRTC 1 success
(II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: Screen 0 is not DRI2 capable
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 12, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 12, (OK)
drmOpenByBusid: drmOpenMinor returns 12
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_make_current_read
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: enabled GLX_texture_from_pixmap with driver support
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/r300_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) RADEON(0): Setting screen physical size to 376 x 301
(II) config/hal: Adding input device Macintosh mouse button emulation
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 2.2.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
(**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
(**) Macintosh mouse button emulation: (accel) set acceleration profile 0
(II) config/hal: Adding input device ImExPS/2 Logitech Explorer Mouse
(**) ImExPS/2 Logitech Explorer Mouse: always reports core events
(**) ImExPS/2 Logitech Explorer Mouse: Device: "/dev/input/event6"
(II) ImExPS/2 Logitech Explorer Mouse: Found 5 mouse buttons
(II) ImExPS/2 Logitech Explorer Mouse: Found x and y relative axes
(II) ImExPS/2 Logitech Explorer Mouse: Found scroll wheel(s)
(II) ImExPS/2 Logitech Explorer Mouse: Configuring as mouse
(**) ImExPS/2 Logitech Explorer Mouse: YAxisMapping: buttons 4 and 5
(**) ImExPS/2 Logitech Explorer Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "ImExPS/2 Logitech Explorer Mouse" (type: MOUSE)
(**) ImExPS/2 Logitech Explorer Mouse: (accel) keeping acceleration scheme 1
(**) ImExPS/2 Logitech Explorer Mouse: (accel) filter chain progression: 2.00
(**) ImExPS/2 Logitech Explorer Mouse: (accel) filter stage 0: 20.00 ms
(**) ImExPS/2 Logitech Explorer Mouse: (accel) set acceleration profile 0
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) Macintosh mouse button emulation: Close
(II) UnloadModule: "evdev"
(II) ImExPS/2 Logitech Explorer Mouse: Close
(II) UnloadModule: "evdev"
(II) AT Translated Set 2 keyboard: Close
(II) UnloadModule: "evdev"
Output CRT1 disable success
Blank CRTC 0 success
Disable CRTC 0 success
Blank CRTC 1 success
Disable CRTC 1 success
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0): MC_FB_LOCATION : 0xefffe000 0xefffe000
(II) RADEON(0): MC_AGP_LOCATION : 0x003f0000
(II) RADEON(0): avivo_restore !
Enable CRTC 0 success
Unblank CRTC 0 success
(II) RADEON(0): [drm] removed 1 reserved context for kernel
(II) RADEON(0): [drm] unmapping 8192 bytes of SAREA 0xf802f000 at 0xb79a0000
(II) RADEON(0): [drm] Closed DRM master.
Last edited by edenxavier (2009-07-28 03:31:10)

HT1351 I have a apple ipod touch but recently I restored all the settings, as well as the applications. But now I am not able to add songs to it. There is blank screen that shows the symbol like to connect to itunes first. I'm not able to use that... Plea

I have a apple ipod touch but recently I restored all the settings, as well as the applications. But now I am not able to add songs to it. There is blank screen that shows the symbol like to connect to itunes first. I'm not able to use that... Please help

The iPod's firmware is corrupt. You'll need to restore it again in iTunes. If necessary, place the iPod in recovery mode for iTunes to recognize the device. Use the instructions in this Apple support document to walk you through the process of placing the iPod Touch into recovery mode.
iOS: Unable to update or restore
B-rock

Blank Screen (Raid/BIOS Problem?)

Have been running a stable setup for several months with the following components:
845 Ultra ARU (PIV 1.6A)
Gainward Geoforce III 128 MB
2 - Seagate Barracuda IV
Kingston 512MB DDR
Enermax EG365P-VE
Windows XP
All running at default values (i.e. no overclock). Very stable until this weekend when the screen went blank while in rest mode (no programs running). The system did not respond to anything other than the reset button.
The system boots normally until it attempts to start Windows XP (at that point producing the same blank screen no response/no warnings or error message setup). BIOS settings appear unchanged and the array appears to be functioning during the startup (sends back that message and correctly identifies the 2 disks). Attempting to repair the XP setup (using the XP install disk) does not recognize the array as a properly formatted device (it sees it just says the format is unknown). Booting on floppy with the array drivers allows a directory of a third disk that has always been installed on the secondary IDE controller (it's not bootable just a backup of old information) but does not recognize the format of the arrayed devices.
Thinking out loud:
Could a BIOS flash help?
Are there any other suggestions before I'm forced to have to reformat the array?

Wasn't able to come up with a bootable floppy with FDISK on it. Copied the data onto the small drive hanging off the onboard IDE controller and attempted to reformat the array.
However the XP format fails at various stages on the formatting. Checkdisk also fails in phase 4 (sometimes right away and other times after a period of time). The error messages are non descriptive (just XP was unable to complete the function) and after the failure the drive is not accessible until the next time the computer is turned on. Tried to delete and reinstall the array but that doesn't appear to do anything (the data is still there which surprised me). Is there a way to completely wipe out the array and start over?
Don't think it is a jumper issue (it worked for several months without a glitch) but will check. Can't see what would have happened to the driver but will try to reinstall the motherboard driver (I understand that has the RAID driver as well). Could try and reflash the BIOS?

MacBook Pro Blank Screen (Built - in & External) - continued

This thread is a continuation of [MacBook Pro Blank Screen (Built - in & External)|http://discussions.apple.com/thread.jspa?threadID=1478474]. The thread was getting too long and some browsers were timing out.
Thank you,
Apple Discussions Staff

I brought mine into the Apple Store last night. I had not left it for service last time as I had not cleared it of some confidential client data. This time, I encountered a much more knowledgeable Genius who seemed to have heard of the Nvidia problem.
So, my MBPro is on its way to the depot. It will apparently be $310 total, flat fee, supposedly ready within a week.
I do expect Apple will do the right thing eventually and extend warranties for the defective Nvidia subsystem. However, I can't wait until they do. I need my Macbook Pro to be functional.
Again, my strong advice...
*At the first hint you are getting this problem, turn on screen sharing.*
If you have this specific Nvidia problem, you will still be able to access the machine remotely, which can be incredibly valuable in terms of saving data before you send it for repair. When you hand it over, you will initial a statement saying you have backed up your data and Apple is not responsible if the machine is wiped during repairs. Set up screen sharing so you can operate the machine during the Nvidia failure.

Nokia c3-01 constant blinking and blank screen

2 months after i purchased my nokia c3-01,i noticed a constant blinking and a blank screen whenever i try to turn on my phone. Pls i need your help.
Solved!
Go to Solution.

Your phone has suffered from a failed firmware update. You need to take it to Nokia Care Centre. Check the link below for more details.
http://discussions.nokia.com/t5/Pool-of-Knowledge/Recovering-from-a-failed-firmware-update/td-p/3981...
Please mark the post as solution if it solves your problem.
Current Device - Nokia Lumia 1020/920

[SOLVED] Login Prompt Vs Blank Screen On Startup

Hello there,
Problem:
- When booting into Arch I am either presented with the Login Prompt (Yay!) or a blank back lit screen (Boo!). The pattern is completely random. I can boot up 2-3 times in a row successfully then go on a streak of blank back lit screens and am forced to constantly reboot until I get it to work (see below):
Boot Attempt => Result after selecting Arch from Grub
1) Blank screen
2) Blank
3) Blank
4) Login prompt
5) Login
6) Login
7) Login
8) Blank
9) Blank
10) Login
11) Login
12) Blank
13) Login
14) Blank
Its a fresh install up until this point in the procedure, Arch Wiki Beginners Guide, so no graphical elements have been installed yet only thing I have installed is firmware for the wireless Broadcom (which is working fine).
Display: Intel Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03)
Network: Broadcom BCM4311 802.11b/g WLAN (rev 01)
CPU: Core Duo ~2Ghz x86
RAM: 1.5GB
Memory Test: Success
sda
|------sda1 (Windows XP)
|------sda2 (NTFS partition [No OS])
|------sda3 (Arch i686)
|------sda4 (Swap)
Search regarding blank screen turned up this thread, https://bbs.archlinux.org/viewtopic.php?id=151240 , which seemed relevant. It led to KMS though not sure exactly what that does even after reading the Wiki so I decided to post here rather than tinker with it and risk making things 100x worse than they already are.
Any idea as to what could be causing my irregular boot behavior?
Last edited by notyourbuddy (2013-01-01 04:07:28)

cfr wrote:Although that thread seems similar, I'm not sure how this could be the same issue as I thought KMS required a suitable video driver. Still, you could try passing nomodeset on the kernel command line as described in that thread. The worst that will happen is that it won't work. (You can edit the line from the grub menu so if it doesn't work you can just reboot and be back to the same settings you had before.) I guess you'd have to boot a few times to know if it helped.
Hmm, that seems to have fixed my problem. 9 successful reboots in a row. Figured with my erratic boot behavior as opposed to 100% blank screening that my problem was far worse when in fact the solution seems to have turned out to be quite simple. Oopsie. My bad guys.
Followed these steps to make the changes persistent, https://wiki.archlinux.org/index.php/Kernel_parameters , and seems to be holding up well. Will go ahead and marked as Solved and hope no more monitor boot problems arise.
cfr wrote:So just to clarify: you have not installed any video drivers at this point, correct? And you haven't installed X? You definitely only have one graphics card?
Nope. Nope. Yep.
cfr wrote:You can try examining the log files to see what is happening on successful versus unsuccessful boots. journalctl will let you do this and you can filter it with various options.
Cool, first time I've heard of this and just tested that out. Looks to be a wealth of information. Will have to remember this next time I have boot woes.
Last edited by notyourbuddy (2013-01-01 04:12:26)

Blank screen but powers on

i have an older imac bought in i think about 06 i cut the power button on and you can hear it powering up and the light in bottom right hand corner also lights up, but there is a blank screen. No picture at all. What can possibly be wrong. please help.

Very difficult to troubleshoot but almost certainly it's a hardware failure of some type. My guess is one of these three:
Failed HD
Failed Graphics Card
Failed Display
If you have another Mac available you can try connected the two via Firewire Target Mode (Google it) to see if you can see the HDD, if you can then you know it's 2 or 3. My recommendation though is to take it to an Apple Store or AASP to be professionally diagnosed. On a 6 + year old system it's anyone's guess.

Popular blank screen

Hello:
I'm trying to install in my laptop current version of archlinux (2012.11.01), my laptop has a intel chipset video with currently debian installed.
When I placed the cd and reboot, and I can see the boot options, when selecting "x86_64" option, I see some loading messages, later my laptop goes black
I can see my drive still loading and reading the CD, but the screen is black.
Googling around, I tryed the following kernel params, one by one:
acpi=off
noapic
nolapic
edd=on
nodmraid
nomodeset
and either, dump a "{DRDY} error" or blank screen
Question: Is there any other param should I tryied?
Note: I installed debian with netinstall with non-free software included...which the installation was correctly...maybe I need extra firmware?

I tried the following suggestions:
gma500_gfx.blacklist=yes
i915=0
i915.modeset=1
and same results
I can't access anything because all goes to blank, yes, I press all keys
I'm attaching my current lspci:
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03)
00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03)
00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03)
00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03)
00:1c.2 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03)
00:1d.3 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93)
00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03)
00:1f.2 SATA controller: Intel Corporation ICH9M/M-E SATA AHCI Controller (rev 03)
00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03)
04:00.0 Network controller: Intel Corporation WiFi Link 5100
05:00.0 Ethernet controller: Broadcom Corporation NetLink BCM5784M Gigabit Ethernet PCIe (rev 10)
My laptop is an intel core 2 duo cpu T6600 @ 2.20 GHz

MacBook pro blank screen

Blank screen on start up

anyone experianced any similar problems as me and rebooter ??
i just delivered my mbp to the apple retailer i bought it, and it will take about a month to get it back, didnt have time to try anything else, since ive basicly tried EVERYTHING already
as i wrote, the screen is completly black, i can adjust the sound, the is NO start up chime, if i press CAPS LOCK it lights, and i can transfer files from it via firewire to my old macbook .. for me it sounds like the display is dead, but its very strange since it only happended after i upgraded the firmware, and mistakenly closed the lid in the process (as i wanted to view the screen on my cinema display instead).
Thank you for your reply.

Firmware Failure & Blank Screen

Similar Messages

Maybe you are looking for