Firmware File Corrupt when trying to update to 1.2

I just bought a game, and after that when i tried to update to 1.2 it says firmware file corrupt and it wont let me restore either. Can someone help me?

Hi S. Han!
The article Ryan linked you to basically explains how to do this. Here's a step-by-step way:
Since you're on a Windows computer, here's what to do:
1 - Eject/disconnect your iPod, and close iTunes if it is running.
2 - Go to "Windows Explorer".
3 - Go to and follow this path:
C:\Documents and Settings\yourusername\Application Data\Apple Computer\iTunes\iPod Software Updates
(If you cannot see these files, then try this: In the "Tools" menu, click on "Folder Options", "View", then select "Show hidden files and folders".)
4 - When you are able to view these files, drag the "iPod Software Updates" folder to your Trash bin or Recycle Bin on your computer.
Now this is complete, connect your iPod and open iTunes. Proceed to install the software update again, and see if it works now.
I hope this helps you,
-Kylene
If any post helps or solves your issue, please mark it that way accordingly. Thank you for helping the boards!

Similar Messages

HT4623 i get a corrupt file error when trying to update to ios7 anyone else have this issue or know how to fix it?

Trying to update my iphone and always getting corrupt file error any ideas how to fix it

If you're doing it over the air, try updating through iTunes.

HT201210 i was trying to update my iphone 4 to ios 6, unfortunately there was an error message: "iphone is corrupted when trying to update, please make sure that there is a network connection etc...".

please help.
i was trying to update my iphone to ios 6 thru itunes but there was an error message that my phone is corrupted while downloading and that i make sure that there is a network connection and to retry downloading.
no software update available in the general settings...

Before beginning the download, try temporarily disabling your antivirus, anti-adware, anti-spyware, and any other anti-whatever that is required with the secure OS your computer is running.

Creative Cloud update fails with "the download appears to be corrupted" when tried through our company's firewall, but succeeds if the computer is taken outside the firewall

Creative Cloud update fails with "the download appears to be corrupted" when tried through our company's firewall, but succeeds if the computer is taken outside the firewall. The IT guys have opened up the ports and URL's specified in the Adobe documentation. I have also captured the network traffic of both the failed and successful downloads for IT to examine (using Little Snitch), however they can find nothing to account for the problem. Adobe just seems to "give up and die" after about 2-3 minutes. Why is this? How can I or IT fix this?
Can I send the above log files to someone familiar with these issues for examination?

Hi Gveo,
Please follow the article: Creative Cloud Help | About Creative Cloud Packager which will help you to get your issue fixed.
Thanks,
Ratandeep Arora

When trying to update my iPad 2 to iOS 7 I keep getting the message that it has stopped because the file is full. There is plenty of room on the iPad. It also says to check the settings. What do I do now?

When trying to update my iPad on iTunes I keep getting a message that the download has stopped because the file is full. There is plenty of space on the iPad. Also, the message says to check the settings. What am I supposed to check in the settings? What do I do now?

I have the same problem. It is only with tv shows and only with programs I have downloaded after the software update.
Apple support sent me the above link too....but it doesn't solve the problem...my computer is authorized and the content is in my library and will play on my Mac air, but it will not sync the tv shows, it keeps saying my computer isn't authorized for it.
No answers here, but you are definitely not alone with this issue.

I'm getting this problem when trying to update my iphone 3gs it says that the iphone software could not be contacted and I went on youtube got some advise to go into my hard drive to fix the error I have nothing in my host file please help me if you can

I'm getting this problem when trying to update my iphone 3gs it says that the iphone software could not be contacted and I went on youtube got some advise to go into my hard drive to fix the error I have nothing in my host file please help me if you can this is all new to me.

Read this: iOS 4: Updating your device to iOS 5 or later
... oh I think it is a 3gs or a 3
This makes a difference. What does it say in Settings > General > About?

HT1218 When trying to update Airport Express firmware I get an error message and it won't update.

When trying to update my Airport Express firmware I get an message that an error occured and it can't update.

most likey.Here is the new article apple has on it http://support.apple.com/kb/TS5376

"iTunes could not backup the iPhone because the backup was corrupt or not compatible with the iPhone." Anybody else experienced this when trying to update iPhone software to 5.1.1???

"iTunes could not backup the iPhone because the backup was corrupt or not compatible with the iPhone."
Anybody else experienced this when trying to update iPhone software to 5.1.1???
How have you resolved this issue.
Any help anyone can give will be warmly received!!
Thanks,
R.
London.

Hello jsachi,
The article linked below details a number of troubleshooting steps that can help get a backup created in iTunes.
iOS: If you can't back up or restore from a backup in iTunes
http://support.apple.com/kb/TS2529
Cheers,
Allen

When trying to update firmware on nano 3rd gen i get error -23

What is error -23 i can't seam to find anything about this... its really anoying as my ipod wont update firmware or restore... have tried deleting itunes and reinstalling etc.. even attempted on a different pc without itunes installed, IE installed itunes but still same error when trying to update to new firmware.... could someone please help me with this anoying issue.
Cheers

I just tried redownloading from itunes and installing and I got a messages saying installation was successful, but then right after that I got the following error message: iTunes was not installed correctly. Please reinstall iTunes Error 7 (Windows error 127)
Any thoughts?

When trying to update Acrobat XI I get a 1328 error each time. I have uninstalled XI and reinstalled it from disk. When trying to update the newly installed XI I still get the 1328 error. I have searched my C: drive for the file C:\config\Msi\PTA082.tmp b

When trying to update Acrobat XI I get a 1328 error each time. I have uninstalled XI and reinstalled it from disk. When trying to update the newly installed XI I still get the 1328 error. I have searched my C: drive for the file C:\config\Msi\PTA082.tmp but with no sucess. Any suggestions?

Hi Berriedale,
Please try the below steps and check.
Turn off any antivirus or software security program.
Download the update patch 11.0.10 manually from the below link and run it.
http://www.adobe.com/support/downloads/detail.jsp?ftpID=5859
Regards,
Anand

Hi I am getting an update failed message (49) when trying to update photoshop after installing and whenever I start photoshop and try to access the file menu it crashes

Hi I am getting an update failed message (49) when trying to update photoshop after installing and whenever I start photoshop and try to access the file menu it crashes

Duplicate thread.

How do you fix Error 2753. The File 'acrosup64.dll is not marked for installation. when trying to update

how do you fix Error 2753. The File 'acrosup64.dll is not marked for installation. when trying to update?

i have trid from the adobe website and from the auto update notice, however
none have been successful. i am running windows 8.1 and i have another pc
running the same 8.1 and that one has successfully updated.
Philip P Copley
P.O.Box 3155
Norwood 5067
South Australia
[email protected]
(08) 8431 6885
0401 686 087

Error 6 when trying to update firmware

Getting Error 6 when trying to update firmware

Probably no need for concern, but it would be a good idea to run the update again, just in case everything did not "stick".
Always connect your Mac using an Ethernet cable to one of the LAN <-> ports on the Time Capsule whenever you do an update....if at all possbile.
Once the update is done, you can disconnect the Ethernet cable.

IPod touch 4 gives message "Cannot Download" "there is not enough available storage to download...You can manage your storage in settings." when trying to update or install one but not all apps. I have more storage than the app takes. Can u help?

iPod touch 4 gives message "Cannot Download" "there is not enough available storage to download...You can manage your storage in settings." when trying to update or install one of the apps, but not other apps. I have more space available than needed for the app. What do I need to do to fix this problem? Do I need to completely reset this device as new and, if so, how should I do that?

You need to delete some item (apps, music, photos etc) from the iPod,.However, sometime files get corrupt. To determine that connect the iPod to your computer and click on the iPod under Devices in iTunes. How much storage is used by the "other" category. If over 1 1/2 GB that indicates corrupted files.
To get the "other" down to normal value you need to restore your iPod usually restoring from backup works but sometimes restoring to factory settings.new iPod is required./

Error message when trying to update Leopard 10.5.1 to 10.5.2

I was happy when I switched from PC to Mac a year ago. But since upgrading to Leopard I have had so many problems that it reminds me of my (bad) experience with Windows... Where I live in dark Africa there is no support at all, so I hope some of you have a solution for my problems.
Since upgrading to Leopard I have had a lot of minor problems, which are quite irritating. But now it is getting serious, as a number of updates have failed. I just bought Aperture 2, which needs OSX 10.5.2. And now I can't upgrade form 10.5.1 to 10.5.2!
First I couldn't run the Security Update 2007-09, downloaded through Software Update. The error message said: The update "Security Update" can't be installed. The installer could not validate the contents of the "SecUpd2007-09" package. Contact the software manufacturer for assistance.
I then tried - in vain - to install the 10.5.2 upgrade: The error message says almost the same as the above mentioned, but mentions "MacOSXUpd10.5.2Patch".
I then tried to follow the recommendations and downloaded the MacOSXUpdCombo10.5.2 file. 343,4 MB through my 64 kb/s connection (!!!). Imagine the nightmare, when the error message appeared: "Checksum Invalid".
Maybe I should add that when trying to update Quicktime the error message said something about that the operation failed because there was tampered with the file...!
Thanks guys

William,
In fact I have tried both the normal software update a couple of times AND downloading the combo installer. The message, when trying to install the latter, was "Checksum Invalid". Is it possible that the files get corrupt during download? I am getting crazy - I need the upgrade to 10.5.2 in order to upgrade Aperture 1.5 to 2.0, which again is necessary in order to download images from my new camera... :((

Firmware File Corrupt when trying to update to 1.2

Similar Messages

Maybe you are looking for