Firmware for HP LaserJet 1150

Requires the firmware for HP LaserJet 1150 to set the Zyxel keenetic Giga. Where can I download it?

After reading the website that you linked me to, I found that this is a company website and they tested these printers with their product and are suggesting a USB connection.
This printer did not have any firmware available for download.
The product page for the Laserjet 1150 is located here and you can find drivers under the appropriate OS.
Laserjet 1150
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as Accepted Solution

Similar Messages

Can't get driver to work for HP Laserjet 1150 and Windows 7 laptop

windows 7 64 bit PS driver for Laserjet 1150 is looking for .inf file. Not in driver folder. won't connect to printer.
Help

For the 1415 you need to download an application that runs on your computer and then installs the new firmware in the printer. You can find that firmware program here:
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?lc=en&dlc=en&cc=us&product=4089468&
I hope this helps.

HP LaserJet 1150 NOT collating / un-colatting

YES, I have posed this question to HP Printer Support, but I think the problem is actually in OS X -- as HP and Apple have worked extensively to include all of the HP drivers, etc. into OS X.
Our used HP LaserJet 1150 (black only) printer does not colate/un-colate the pages it produces.
The pages come out onto the front bin, face down - with LAST page of document printed FIRST. This requires hand collating the output.
What is needed is for the FIRST page of the document to be printed FIRST, and as the sheets come out face down, NO hand collating would thence is required.
Note that the PRINT Dialogue Box (part of OS X) is what determines the order of printing of the pages of a document.
Any help would be appreciated.
Samuel

Well, if it's not on your install...
Custom installs in Mac OS X 10.4
http://docs.info.apple.com/article.html?artnum=301229
Here's a complete list of all the custom Printer installation options available with Optional Installs.mpkg:
* Print Drivers
o Brother Printer Drivers
o Canon Printer Drivers
o Electronics For Imaging Printer Drivers
o Epson Printer Drivers
o Hewlett-Packard Printer Drivers
o Lexmark Printer Drivers
o Gimp Printer Drivers
o Ricoh Printer Drivers
o Xerox Printer Drivers
Or hp laserjet 1150 dot4 5.0.5.0...
http://mac.wareseeker.com/free-hp-laserjet-1150-dot4-5.0.5.0/

Firmware for mfp m175nw

Where can I get the eprint firmware for Laserjet 100 MFP M175nw...

Hi,
Is this the one you are looking for ?
http://www.wyyxgl.com/office-products/1733.htm
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Unable To Repair/Update Firmware for a Creative Nomad Jukebox

Hello all,
I've been trying for the past...3 or 4 hours to get my player to work, but it simply refuses to work =P. I sent the problem into Creative, but haven't gotten a response for a couple days now. So, here's a copy-paste of what I sent in that e-mail. If you can think of anything that might help, please don't hesitate to post! I really need your help on this one!
My player's hard dri've recently died, and I received
a replacement from the original store (a CompUSA).
However, my Firmware for the device has failed. I
tried the firmware upgrade for my Zen, but after
a certain number of tries, I gave up. Here is the
list of steps that I followed.
On Zen: Click "Reload OS", let it run, it says
run the firmware upgrader now.
On Computer: "You cannot install this firmware
update with your player's current drivers using
the SB394 connector. To update your player's
firmware, this application will temporarily
replace the current drivers and restore them after
the installation is complete. Continue
installation?", I click Yes. Then it says to
disconnect, and re-connect. I do it.
It shows my version (.2.0), and I'm upgrading/
repairing it to .2.02. When I click "Upgrade", a
warning message pops up and says:
"Your player cannot start up properly. Please
reboot your player and run this application again.
I've done this at least 0 times, and nothing changes. My player is a Nomad Jukebox Zen, the one with a FireWire connection, and like I said,
I've tried this at least 0 times with the same results. Is there a process to completely remove
the firmware on the device, then reinstall it,
or to roll it back or something? Any other ideas
to fix this problem is needed as well.

Bump.

Where are the drivers for HP LaserJet 5P for Windows 8.1 (64bit)?

Had been using HP LaserJet 5p printer with HP LaserJet 5p printer driver, but had printer disconnect for a few months due to not have black toner. Now I want to use the printer and my control panel does not show HP Laser 5p printer for my tablet but shows it for my laptop. I can not find the driver on the HP support list and the support list does not recognize HP LaserJet 5p.
Where are the drivers for HP LaserJet 5p for windows 8.1 (64bit)??????

Hi,
Basic print drivers are available for the HP Laerjet 5P via Windows Update.
Follow these steps to install the printer drivers on Windows 8.1:
http://h20564.www2.hp.com/hpsc/doc/public/display?docLocale=en_US&docId=emr_na-c03470332#N100AA
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Can't find firmware for BEFW11S4 v2

I'm having trouble finding a firware update for v2 of my BEFW11S4 router. The support page for this model offers a firmware update for v4 only. My current firmware v. is 1.45, which may be the latest version, but I can't seem to find this out anywhere on the Linksys website.
The reason for the update is that my neew iPod 2G won't connect to the internet and I'm guessing an update might help.
Thanks in advance for any assistance.

You can Download 740 KB firmware for BEFW11S4 V2 and save it on the dekstop
Follow these steps to upgrade the firmware on the device : -
Open an Internet Explorer browser page on a computer hard wired to the router...
In the address bar type - 192.168.1.1...Leave the Username blank & in Password use admin in lower case...
Click on the 'Help' tab- Then click on the 'Firmware Upgrade' .... Here click on 'Browse' and browse the .bin firmware file and click on "Upgrade"...
Wait for few seconds until it shows that "Upgrade is successful" After the firmware upgrade, click on "Reboot" and you will be returned back to the same page OR it will say "Page cannot be displayed".
Now reset your router :
Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...
If your Internet Service Providor is Cable follow this link
If your Internet Service Providor is DSL follow this link

After downloading firmware for airport utility, airport express base station no longer registers with airport utility on my Mac. Now the base station is blinking amber with no info of what is causing all this to happen. Any suggestions?

After downloading firmware for airport utility last night, airport express base station was deleted from airport utility and only Time Capsule remains. When I plug in the base station, an amber light blinks without being able to verify the cause. Any suggestions to remedy this problem?

There are only a couple of things you can do to resuscitate a nonresponsive Express:
"Hard reset":
Press and hold the reset button with a pen or pencil until you see the status light (LED) start to flash amber rapidly, which should occur after about five seconds.
If that does not work,
"Factory defaults reset":
Unplug the Express from power.
Press and hold the reset button with a pen or pencil, then plug the Express back in while continuing to hold the button until you see the light (LED) flash rapidly. This should happen after a few seconds.
Release the button.
In either case you will have to reconfigure the Express as a new device. A moment or two after it has been reset, the LED should be blinking slowly. It must then appear in your Wi-Fi menu like this:
Earlier versions of OS X will report it as "Apple Network nnnnnn".
In either case, select it, and then launch AirPort Utility.
If it does no appear in your Wi-Fi menu after it has been reset using one of the two techniques above, it is defective. Other than attempting another reset, there is nothing you can do.

Win XP 64 driver for hp laserjet pro 200 color mfp m276nw

Hi, any workaround for using this printer under XP-64?
Maybe driver rename or compatible generic?
Just bought it, unpacked, connected - and found out that XP 64 is not supported.
Now what? Return in disgust and buy Cannon or Minolta again, as they support all OS?

Hello sangamon,
Welcome to the HP Forums!
I understand you're looking for a Laserjet 200 color MFP m276nw driver for Windows XP 64 bit. I will do my best to assist you! Have you tried downloading the full feature from the HP website here? This will support your operating system. Please let me know if you have any further questions.
Have a great night!
I worked on behalf of HP.

Windows 7 driver for hp laserjet 1100

windows 7 driver for hp laserjet 1100

Hello Stoiko,
Thanks for the post. Depending on which model of HP LJ 1100 that you have, the drivers for Win7/64 can be located here: Good Luck!
HP LJ 1100
http://h20566.www2.hp.com/portal/site/hpsc/public/psi/swdHome/?lang=en&cc=us&sp4ts.oid=14925
HP LJ 1100 All-in-One
http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdHome/?sp4ts.oid=12006&spf_p.t...
I worked for HP but my posts and replies are my own....Thank you!
*Say thanks by clicking the *Kudos!* which is on the left*
*Make it easier for other people to find solutions, by marking my answer with (Accept as Solution) if it solves your issue.*

EPrint stopped working for HP LaserJet Pro 1415fnw

We had ePrint set up on our HP 1415fnw and today, the printer is no longer set up under my ePrint login and we cannot ePrint using the email address we had.
I have:
1. Reset the printer to factory defaults and set up wireless network printing again. We have set the IP manually and the printer prints just fine wirelessly.
2. Installed the new firmware for the 1415
3. Installed updated printer drivers.
4. Powercycled the wifi-router and the Internet router.
I go to the HP Web Services tab and click "Connect" and I get "connection error. Make sure you are connected to the Internet."
The PC and printer are all connected and working fine on our wireless network. There are no ports blocked that we are aware of via our ISP.
As I said, it worked fine up until a while ago.
I am open to suggestions...

2Expected availability late 2010. Requires an Internet connection to the printer. Feature works with any Internet- and e-mail-capable device and may require a firmware upgrade. For details, http://www.hp.com/go/ePrintCenter.
http://h10010.www1.hp.com/wwpc/ca/en/sm/WF05a/18972-18972-3328060-3328070-3328070-4052955.html
Where is my eprint???

Drivers for HP laserjet 1020 printer for Macbook Pro OS 10.10.1?

Like to install drivers in OS 10.10.1 for HP laserjet 1020 printer. When checking on App Store updates I cannot find anything. Where do I find the driver? Thank you

Hi @LGolf ,
I see by your post that you are looking for drivers for the Laserjet 1020, for 10.10.1. I would like to help you.
Unfortunately the Laserjet 1020 is not supported on a Mac operating system.
Printer Specifications for HP LaserJet 1020 Printer Series.
Have a great day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

DRIVERS FOR HP LASERJET 1005 SERIES FOR WINDOWS 8.1 64 BIT

Hello!
When I can get drivers for hp laserjet 1005 series for windows 8.1 64 BIT?
My printer work perfect and i would not chance it!
Is anny solution there?
Thank you for your answer.

Hi, the 1005 Laserjet is not supported in Windows 8/8.1, see this link.
Please mark the post that solves your issue as "Accept as Solution".
If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
I am not a HP employee.

Drivers for HP Laserjet P1007 Printer

I have not been able to get the Drivers for Hp Laserjet P1007 Printer loading into my iMac Desktop.
HP sites dpo not open up for my required queries
thanks
s.s.kulkarni

Hi.
Follow these steps to install the printer:
http://support.hp.com/us-en/product/HP-LaserJet-P1000-Printer-series/3435678/model/3435679/document/...
Basiclly you would need to turn the printer on and connect it to your Mac.
From the Apple Menu click on Software Update and install the HP Printer Drivers v3.0.
Next the printer should appear under Print & Scan, if it isn't click the plus sign and add it.
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Drivers for HP Laserjet 4000t in Windows 7

I need Drivers for HP Laserjet 4000t in Windows 7. Do they exist? Where do I get them? I hate to lose my reliable old printer

Hi:
Try the W7 32 bit drivers and software from the HP Probook 450 G2.
Your model uses the Intel HD graphics driver.
http://h20564.www2.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=6943827&swLangOid=8&swEnvOid=4053

Firmware for HP LaserJet 1150

Similar Messages

Maybe you are looking for