Firmware for the Cisco 3G Wireless HWIC

Is it FW K2.0.7.19 compatible with EHWIC-3G-HSPA+7?

Latest release is 1.8.0 from Jan 25, 2010:
http://tools.cisco.com/support/downloads/go/ImageList.x?relVer=1.8.0&mdfid=282790482&sftType=Small+Business+Pro+Wireless+Software&optPlat=&nodecount=2&edesignator=null&modelName=Cisco+AP+541N+Wireless+Access+Point&treeMdfId=278875243&treeName=Wireless&modifmdfid=null&imname=&hybrid=null&imst=null&lr=Y

Similar Messages

  • Any new firmware for the Cisco AP541N access points.

    Do you know if Cisco has come out with any new firmware for the Cisco AP541N access points.

    Latest release is 1.8.0 from Jan 25, 2010:
    http://tools.cisco.com/support/downloads/go/ImageList.x?relVer=1.8.0&mdfid=282790482&sftType=Small+Business+Pro+Wireless+Software&optPlat=&nodecount=2&edesignator=null&modelName=Cisco+AP+541N+Wireless+Access+Point&treeMdfId=278875243&treeName=Wireless&modifmdfid=null&imname=&hybrid=null&imst=null&lr=Y

  • Does the airport time capsule eliminate the need for my cisco linksys wireless router?

    does the airport time capsule eliminate the need for my cisco linksys wireless router?

    I understand that your network now looks like this:
    Modem > Security Router > Cisco/Linksys router > Devices
    If you do not want to use the Cisco/Linksys router and use a Time Capsule instead, then your network would look like this:
    Modem > Security Router > Time Capsule > Devices

  • Link does not work for-End-of-Sale and End-of-Life Announcement for the Cisco Secure Access Control System 5.4

    Link does not work for
    End-of-Sale and End-of-Life Announcement for the Cisco Secure Access Control System 5.4
    How do we get Cisco to fix?
    see attachment

    Give it a couple of days - it looks like they just sent out the notification before the notice was published on the public page.
    Once the ACS 5.4 EoS/EoL notice is published you should see it linked from this page.

  • Cannot find the latest firmware for the Toshiba 40TL838G

    Hi,
    I'm trying to download the last firmware for the model 40TL838G but I can't find it.
    Where can I find it?
    Thank you.

    Are you sure that TV is connected to internet properly?
    How did you connect it? LAN / WLan stick (TOSHIBA Dual Band WLAN-Adapter WLM-20U2)?
    In some cases it could be possible that some routers dont pass the firmware update due to locked ports. In such case you should check your router configuration. As additional option you could try to test the TV in connection with another network

  • Need new firmware for the drive (Mat****a UJDA750)

    I have a Satellite M30 with a Mat****a UJDA750 combo drive. Does anyone know where I could get a new firmware for the drive?
    Thx.

    Hi,
    It would be up to Toshiba to release an official firmware update for this drive and at the moment they do not have one.
    You could of course look at 3rd party sites such as cdfreaks.com.
    Regards,
    Nick

  • What sort of fxs card to buy for the cisco router 2801

    Hi
    I have just bought a cisco router 2801 which l want to setup for my VIOP lab. Can pls advice me on what sort of fxs card l should buy for the cisco router 2801 to connect the ip phones or the analog phones.

    Hi
    It depends what you want to do:
    IP Phones - need nothing
    FXS - needed only if you want to connect analogue handsets or faxes
    FXO - needed if you want to connect the system to a POTS line
    There are further interfaces (BRI, PRI etc) if you have different PSTN connectivity.
    What connectivity do you plan to have in your lab?
    Aaron
    Please rate helpful posts...

  • Seagate SN06 firmware for the Seagate Barracuda ES.2

    Oh Dear!
    Despite emailing Seagate, and consulting their Knowledge base, we cannot locate the lovely firmware for the ES.2 drives [the SN06 firmware] to get our system up and running again.
    If anyone is in the know, we'd love some info or advice.
    Best wishes,
    Macintosh Lou and all the sound designers who are twidding their thumbs.

    Hi,
    I just did it after burning the ISO in the CD.
    While booting I got the first call to initDisk, where it provided way to skip some loading (like config.sys and so on)... I didn't do anything, I left it run normally.
    After few seconds it was showing me the readme file automatically.
    I pressed F10 to quit the view and it gave me the prompt to load the firmware for 750GB and 1000GB disks (this image was working for both sizes).
    I chose my disk size, then the system searched and recognized my disk properly (I checked and it did display my disk's S/N and model properly, including notice that I had SN05 on it).
    Then it started uploading the firmware and finally it asked to power cycle the PC for proper finalization.
    I did press enter and it shutdown the MacPro.
    I then restarted with only that disk inserted and again the FreeDos sequence came up.
    I shut it down again (I think it was unnecessary) and I proceeded re-installing all the other HDD in their original locations.
    Booted from MacOs X and all was perfect (at least I hope this SN06 will fix forever the issue).
    Hopefully you will get into this same point.
    Cheers,
    Armando.

  • Downgrading Firmware for the Superdrive

    Hey there everyone.
    I have a G4 Quicksilver that I'm trying to install OSX onto. I have retail purchased installer discs, but for some reason the computer will not boot from them. I suspect the firmware for the Superdrive. It will boot from CDs that have OS9 on them, but not OSX. I remember updating the firmware a while ago and experiencing some quirkiness in its performance, but not enough to warrant further investigation. When I try to install firmware updates now, either it tells me I've already done it, or that it's not the right firmware upgrade. Is there a way to go back? If I do, will the OSX installer tell me to reinstall the firmware update before I go any further?
    Thanks, Ninja Bob

    Hi, NinjaBob. There is rarely, if ever, any way to downgrade the firmware of anything after updating it.
    Do you just have one OS X installer disc set? If so, examine Disc 1 of that set very carefully for dirt, scratches, smudges, fingerprints, and pinholes in the data layer. It's possible that a disc defect is at the root of your difficulty, and your drive is fine.

  • What is the highest firmware for the ipod touch 2nd gen.?

    What is the highest firmware for the ipod touch 2nd gen. and where can I download it and place it onto my ipod fast?

    iOS 4.2.1 is the latest version you can install and run on your 2G iPod Touch.  You can complete the update and installation via iTunes.
    iTunes: Backing up, updating, and restoring iOS software
    B-rock

  • Where is the Firmware for the Zen Sleek Ph

    Hi,
    I've been having problems with my Zen Sleek Photo ever since I bought it 2 months ago. Every so often it would freeze on boot-up, so I would have to reset it with a pin to get it to start up. This morning it started going really haywire so I decided to reload the firmware - of course, my disks are at home and when I looked on the creative site here at work, there was no sign of any firmware for the Zen Sleek Photo (it's almost like Creative don't realise this product exists!). Anyway, where can I download the latest firmware?

    I think Creative should add the Sleek Photo to the player list in downloads and add the latest version there (I have version .0.0e). I ordered my player in December (for Christmas). There are a few issues that I have addressed in my "A few annoyances with Zen Sleek Photo 20GB (Request)" thread.
    Sadly there has not yet been an update to fix the artist listings etc. as mentioned in my thread
    I got in contact with another Creative Zen Sleek Photo user who also li'ves in Switzerland and has the same problems (tracks not been sorted correctly even with correct ID3 tags, which work in many many Windows applications).
    By the way, sadly the Sleek Photo gets a load of dust under the screen too, unless you are very careful. I have been unable to remove most of the dust even using compressed air! I would rather not have to get it replaced because of this (unless Creative makes a slightly new casing model to prevent dust under screen) as I would probably end up paying rather a lot for postage (it's going indirectly through another company)
    I hope there shall soon be a firmware update addressing these things,
    Thanks for any response to this,
    StephenRMessage Edited by StephenR on 03-07-20060:53 PM

  • Downgrading Firmware for the WRT54G... I can't do it...

    Hello, I am using the WRT54G wireless router, which currently has the 8.0.01 firmware. That's what it came with when i bought it.
    I am trying to downgrade the firmware to either 3.01.3 or 3.03.6. I want to downgrade to one of those because Xbox said that those two are confirmed to be Xbox LIVE compatible.
    I have been having trouble connecting to games with other people online with this router/firmware.
    I downloaded the firmware "WRT54GV3.0_3.03.6_US_code" and "WRT54GV3.0_3.01.3_US_code," but when I try to install them, it says "invalid code pattern." like three times overlapping eachother above the progess bar.
    It says that error because that firmware is for the WRT54G V3.0 and I guess mine is the WRT54G V8.0? I don't really know.. Is there anyone else with this router that has Xbox LIVE?
    What can I do?
    Thanks for all help in advance,
    Christian
    Message Edited by saxon2309 on 08-16-2007 05:37 PM

    Your router comes in several versions.  Each version has different hardware in it, and because of this, each version needs its own firmware.  You can only use the firmware that is posted for your version of the router.  I assume you have version 8 of the router, if so, you cannot use the firmware written for version 3.
    If the router's version is not clearly stated on its tag (usually on bottom of router), then go to Wikipedia.org and search for "WRT54G", then, using your router's serial number, you can find out which version of the router you have.

  • Factory firmware for the WRT120N

    Good day! Could you give me the factory firmware version 1.0.01. I have a problem with the settings. I want to return to the basic version, but can not find anywhere else. Thank you for your help.

    Over here, you have not mentioned about the fact, what speed are you talking about?
    If you are talking about the wireless connectivity speed between your laptop's wireless-g capable adaptor and your router, getting 10mbps as the speed where in you should be getting 54, then that can be sorted just by adjusting the channel to a different level.....http://192.168.1.1....username - blank...password - admin....go to the tab "Wireless"...select manual as the option and select the channel as 3.....(also if you do not have any wireless-n capable computers in your network, then on the same screen you may select network mode - BG Mixed)
    If you are talking about the internet speed being degraded after you have started using this router, then please try and upgrade the router's firmware to the latest version and that certainly should help!

  • I want a new firmware for the N93i!

    Please don't forget this mobile the N93i! I love this phone! I hope you can update a new firmware, Please. I want to have the same applications than the N95 for the foto camera and the video recorder, when somewhere it's a little dark the quality is bad sorry for my poor english. Thank you.
    Solved!
    Go to Solution.

    You don´t seem to know that the people that post on this board don´t write FW for phones. We just provide user/user or costumer/costumer help.
    If you want to adress Nokia, try using the Contact button on the website itself.
    By clicking the "Kudos!" or the "Solution?" button on the right you can say "Thank You" and you´ll show the author and others that the post is useful.
    The day we stop improving is the day we stop being good.

  • How to install firmware for the WRT54G

    I have downloaded the newest firmware for this router, but the file is a .bin. There is no .cue, .iso or other file associated with it. How do I open this file, or burn it?
    I tried creating a .cue file using a .txt text editor:
    FILE "WRT54Gv5v6_v1.02.2_fw.bin" BINARY
    TRACK 01 MODE1/2352
    INDEX 01 00:00:00,
    and renamed it WRT54Gv5v6_v1.02.2_fw.cue
    Roxio's Creator Classic will burn it to a CD, but when I try to load it by inserting the disk, the disk is blank - but shown as 100% used in raw format.
    Any suggestions? Why would Linksys provide this firmware in this truly complicated format?

    You point your browser at http://192.168.1.1/ This is the LAN IP address of the router inside your LAN. You can connect to this address when you are connected to the router. You don't need internet for that.
    The router came with a firmware preinstalled. Without the firmware the router is just a piece of junk. The configuration program on the CD only sends settings to the working and operating router, i.e. a router which is running its firmware. You can update the firmware by uploading a new firmware file to the router. But there was no firmware on the CD nor was it installed anywhere during initial setup. The router came with a firmware otherwise you could not use it.
    Just go to http://192.168.1.1/ and click on the Administration tab. The firmware upgrade function is somewhere on a subtab. You'll see a browse button with which you select the firmware file you downloaded before. Once you press the Upgrade button (please only do it if you really want to upgrade the firmware!) the browser sends the selected firmware file to the router where it will be installed after the router reboots itself.
    There is no point installing it from a CD as you only have to transfer the file to the router. Burning it to a CD only to load it from the CD does not make a different. As you have mentioned it does not make a difference where the firmware file is. Only as you have to download it anyway and then just transfer it to the router there is no point in burning it on a CD. You upload it to the router and that's it. Afterwards you delete the file because you don't need it anymore and you can download the latest firmware from linksys.
    When you write "DSL, cable and even VoIP modems" upgrading using any OS, did you ever do it? How exactly did you do it? Are you sure there is an updater for MacOS? Linux? Solaris? ... I think most modems will do it in a similar fashion using a browser upload.
    I don't understand what the problem is with this kind of firmware upgrade for you. It works very well and is often used. Many devices have browser interfaces nowadays and thus it is only natural you do the firmware upgrades the same way. The router can be upgraded using tftp as well. However, there are a few pitfalls with this method and often you'll need a command line prompt to run it. But these are the only possibilities to send the firmware file to the router and somehow you have to get it there.
    Message Edited by gv on 09-07-2007 03:01 PM

Maybe you are looking for