Firmware for the Wireless Sound Blas

I have had the Wireless Sound Blaster for over 2 years and I can't seem to keep it from freezing up when playing. Everytime I go to play a playlist, within 20 minutes everything feezes and I have to unplug just about everything in my house and take the batteries out of the remote.
I read the following on CNET:
"BIG TIP for everyone. Go to the Creative Labs message board on their website, find the thread about their Wireless Music Recei'ver and ask the moderator in the thread to email you the latest firmware update. It works like a charm. Yeah, yeah, why go to all that trouble, this firmware should be on their website, blah blah. Do you want this product to work as well as it can or not? It's not much of an effort to make this device run flawlessly. No more dropouts, very responsi've remote, etc."
Moderator, can you help?

can i get a firware too PLEASE. I'M having a problem would hate to return it
[email protected]
here is hte post that i've made with no success on getting the firmwale
http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&message.id=24650#M24 650Message Edited by kvirikadzed on 08-05-2005 07:42 PM

Similar Messages

Questions with the Wireless Sound Blas

I have Unit Firmware .2.0.
Remote Firmware .20.05.
I have had no problems with setting up or connecting to my Music server from the Wireless unit. Works fine but have with two problems.
> The unilt will not continue to play sougs unless you select the item and hit the play button.
2> The mode selection such as suffle and repeat do not cause the music to play continuously. Strange. Made smaller play list of 5 songs and still have to toggle to next song and press play button.
I have down loaded the latest software off the web and have not seen this issue on any of the posts.
Perhaps someone can point me in the right direction?
Thanks.

My Recei'ver firmware shows .22.04
Remote is .20.05
I believe the Recei'ver firmware update is available through email from Jeremy, or at least it has been in the past. I do not know why this hasn't been posted, it's been available for over six months. Seems as though CL doesn't want to give us the impression they support their products. On your suspect functionality... The only time I've used any of that is a smart playlist I made for Christmas music that will play the Christmas genre - random - not limited to a given number of songs. It seems to always start on a different song and plays selections from the Christmas genre in some random order. I haven't used the repeat or random functions from the remote. So far I've been a full album person or pre configured playlist type.
W3

Firmware for Wireless Sound Blas

I have had the Wireless Sound Blaster for over 2 years and I can't seem to keep it from freezing up when playing. Everytime I go to play a playlist, within 20 minutes everything feezes and I have to unplug just about everything in my house and take the batteries out of the remote.
I read the following on CNET:
"BIG TIP for everyone. Go to the Creative Labs message board on their website, find the thread about their Wireless Music Recei'ver and ask the moderator in the thread to email you the latest firmware update. It works like a charm. Yeah, yeah, why go to all that trouble, this firmware should be on their website, blah blah. Do you want this product to work as well as it can or not? It's not much of an effort to make this device run flawlessly. No more dropouts, very responsi've remote, etc."
Moderator, can you help?

Duplicate thread.
Jason

Any new firmware for the Cisco AP541N access points.

Do you know if Cisco has come out with any new firmware for the Cisco AP541N access points.

Latest release is 1.8.0 from Jan 25, 2010:
http://tools.cisco.com/support/downloads/go/ImageList.x?relVer=1.8.0&mdfid=282790482&sftType=Small+Business+Pro+Wireless+Software&optPlat=&nodecount=2&edesignator=null&modelName=Cisco+AP+541N+Wireless+Access+Point&treeMdfId=278875243&treeName=Wireless&modifmdfid=null&imname=&hybrid=null&imst=null&lr=Y

Seagate SN06 firmware for the Seagate Barracuda ES.2

Oh Dear!
Despite emailing Seagate, and consulting their Knowledge base, we cannot locate the lovely firmware for the ES.2 drives [the SN06 firmware] to get our system up and running again.
If anyone is in the know, we'd love some info or advice.
Best wishes,
Macintosh Lou and all the sound designers who are twidding their thumbs.

Hi,
I just did it after burning the ISO in the CD.
While booting I got the first call to initDisk, where it provided way to skip some loading (like config.sys and so on)... I didn't do anything, I left it run normally.
After few seconds it was showing me the readme file automatically.
I pressed F10 to quit the view and it gave me the prompt to load the firmware for 750GB and 1000GB disks (this image was working for both sizes).
I chose my disk size, then the system searched and recognized my disk properly (I checked and it did display my disk's S/N and model properly, including notice that I had SN05 on it).
Then it started uploading the firmware and finally it asked to power cycle the PC for proper finalization.
I did press enter and it shutdown the MacPro.
I then restarted with only that disk inserted and again the FreeDos sequence came up.
I shut it down again (I think it was unnecessary) and I proceeded re-installing all the other HDD in their original locations.
Booted from MacOs X and all was perfect (at least I hope this SN06 will fix forever the issue).
Hopefully you will get into this same point.
Cheers,
Armando.

Windows Update installed the drivers for the wrong sound card?

I need serious help with this one.
It all started October 31st when I find that Windows Update lists an update for my sound card - a Sound Blaster Li've! 24bit internal card. I install it, reboot, and realize that my sound is not coming through the speakers (Note, sound was working before I installed this update. I'm not even sure if the sound card is processing to it). I realized that Windows Update seemed to have installed the drivers for the wrong sound card. It installed drivers for "SB Audigy" (it was originally SB Li've!), why they chose to be so generic - I don't know. I later find out that not even Creative's website has this updated driver, but apparently, only Windows Update is issuing this out.
But wait, it gets even more frustrating.
So I don't have System Restore enabled (big resource hog), and I need to go back to the older drivers. I originally do a driver rollback using the Device Manager, which made the drivers go back to what they were before - but still wasn't outputting sound. I think even though the older drivers were being used by Windows, the software that Creative issued wasn't picking up this fact and thought I still using the newer ones for Audigy. So I decided to uninstall everything and start with an actual driver installation executable from Creative's website (SB24_PCDRV_LB__04_0090.exe). What I found out was that if new drivers are detected, I can't actually install over them.
However, if I uninstall the drivers using the Device Manager, it'll automatically install everything - the control panel, the preferences, drivers, etc for the new "SB Audigy" drivers that were issued Oct 3st once I scan for hardware changes. The reason I need to scan for hardware changes is because if I uninstall the drivers from the Device Manager, it'll remove the instance of "SB Audigy" from the list. This causes problems for the installer for the older drivers (SB24_PCDRV_LB__04_0090.exe) because now it thinks there isn't any hardware to install the drivers for (all because I haven't made the Device Manager actually discover my actual sound card, yet unless I press "Scan for Hardware changes" which as a result, will install the newer drivers from Oct 3st automatically. I hope this makes sense so far).
So now I can't uninstall the newer incorrect drivers so I can install the older ones for the actual sound card. Normally I heard that you can change something in the new driver's installation executable to properly uninstall everything. Only problem is, Windows Update doesn't exactly tell you where it's downloading the driver/hardware installation files. I know in the Software Distribution you can find Windows Update stuff downloading there - but I couldn't find the SB Audigy driver update it keeps installing while "scanning for hardware changes" in the Device Manager.
This was incredibly hard to put into detail, so I hope that it makes a little bit of sense. If you need clarification on anything please let me know and I'll do anything to help eliminate the problem. Just remember I have:
Windows 7 x64
Sound Blaster Li've! 24bit
I think the only problem I'd like to solve is - how could I install older drivers if Windows keeps installing the newer ones even after I uninstall them? Because right now, I can't do much unless I know how to get rid of the installation files for the Oct 3st update so it won't have anything to use. Another way to rephrase the question is, how could I get the Device Manager in Windows to display my soundcard as "Multimedia Audio Controller" for as long as I need so I can run SB24_PCDRV_LB__04_0090.exe which will then detect that there is a sound card that can use the drivers and install them properly?
Thanks for your help guys, I hope we can solve this. Because I've done everything I could. Hopefully I don't need to reinstall the operating system just so I can have sound working.

Click on Start> ALL Programs > Creative > Creative Audio Console.
Make sure speakers are set to 5. if that's what you're using. I like to Synchronize with Windows Control Panel. Turn EAX to No effects, and/or turn effects to 0%. On the CMSS 3D Tab, turn the Mode to OFF.

Cannot find the latest firmware for the Toshiba 40TL838G

Hi,
I'm trying to download the last firmware for the model 40TL838G but I can't find it.
Where can I find it?
Thank you.

Are you sure that TV is connected to internet properly?
How did you connect it? LAN / WLan stick (TOSHIBA Dual Band WLAN-Adapter WLM-20U2)?
In some cases it could be possible that some routers dont pass the firmware update due to locked ports. In such case you should check your router configuration. As additional option you could try to test the TV in connection with another network

Need new firmware for the drive (Mat****a UJDA750)

I have a Satellite M30 with a Mat****a UJDA750 combo drive. Does anyone know where I could get a new firmware for the drive?
Thx.

Hi,
It would be up to Toshiba to release an official firmware update for this drive and at the moment they do not have one.
You could of course look at 3rd party sites such as cdfreaks.com.
Regards,
Nick

Is there a fix yet for the no sound problem with lion on the iMac without having to restart every time I switch the computer on?

Is there a fix yet for the no sound problem with lion on the iMac without having to restart every time I switch the computer on?

Try booting in Safe Mode by holding the the shift key immediately after powering on your system. Safe boot mode will for a directory check of your startup volume, then load only the required kernal extensions (kext files), and deletes some cache files. Once the system boots into Safe Mode you can simply restart the system to see whether the issue has been resolved.
If you still have the issue try resetting the SMC by shutting down the system and disconnecting the power cord for ~15 seconds, then reconnecting the power cord. Next, reset the parameter RAM (PRAM) by holding down the option-option-P-R keys after powering ON the system. Wait until the iMac restarts twice, then let the system boot normally.

Is there sheet music available for the iLife Sound Effect Jingle, "Newborn"?

Is there sheet music available for the iLife Sound Effect Jingle, "Newborn"?

Hi All:
This is a very beautiful song, and I would like to learn it. I would also like to get the sheet music.

If i install my airport extreme using a pc, does that pc need to always be in the house for the wireless network to work?

Do I need to have the PC that I set up teh airport extreme with in teh house for the wireless network to work?

No. You would only need the PC to run the AirPort Utility if you ever need to make any configuration changes to the AirPort Extreme Base Station (AEBS). You can even do that from a remote location. A computer is not required in order for other wireless clients to connect to the AEBS for network/Internet acess.

Downgrading Firmware for the Superdrive

Hey there everyone.
I have a G4 Quicksilver that I'm trying to install OSX onto. I have retail purchased installer discs, but for some reason the computer will not boot from them. I suspect the firmware for the Superdrive. It will boot from CDs that have OS9 on them, but not OSX. I remember updating the firmware a while ago and experiencing some quirkiness in its performance, but not enough to warrant further investigation. When I try to install firmware updates now, either it tells me I've already done it, or that it's not the right firmware upgrade. Is there a way to go back? If I do, will the OSX installer tell me to reinstall the firmware update before I go any further?
Thanks, Ninja Bob

Hi, NinjaBob. There is rarely, if ever, any way to downgrade the firmware of anything after updating it.
Do you just have one OS X installer disc set? If so, examine Disc 1 of that set very carefully for dirt, scratches, smudges, fingerprints, and pinholes in the data layer. It's possible that a disc defect is at the root of your difficulty, and your drive is fine.

After updating to 6.0 iPhone doesn't show in iTunes for the wireless sync

I have the iPhone 4s, after updating to 6.0 it doesn't show in iTunes for the wireless sync. My iPad which is first gen. still shows up. If I plugin with usb it shows up but as soon as I unplug it disappears.
When I click on the sync wireless on the iPhone , it trys to sync but nothing.

it's okay, it is not silly. but yes it was on but i went ahead and turned it, (the phone) off rebooted and turned it back on and rebooted phone again to see if it helps it any.... but to no it did not change, it still doesn't show up. as well as when i look in on wifi and see choose network mine is not populated until after a couple seconds. so it has something to do with not being able to hold on to a wifi signal when going to sleep or putting phone to sleep via power button. i do not see the wifi signal meter until a couple seconds after i wake it up from sleep. and now neither my ipad or iphone show up in itunes. so there is issues i guess with something. i have tried everything an dam too frustrated to do anything more.

What is the highest firmware for the ipod touch 2nd gen.?

What is the highest firmware for the ipod touch 2nd gen. and where can I download it and place it onto my ipod fast?

iOS 4.2.1 is the latest version you can install and run on your 2G iPod Touch. You can complete the update and installation via iTunes.
iTunes: Backing up, updating, and restoring iOS software
B-rock

Where is the Firmware for the Zen Sleek Ph

Hi,
I've been having problems with my Zen Sleek Photo ever since I bought it 2 months ago. Every so often it would freeze on boot-up, so I would have to reset it with a pin to get it to start up. This morning it started going really haywire so I decided to reload the firmware - of course, my disks are at home and when I looked on the creative site here at work, there was no sign of any firmware for the Zen Sleek Photo (it's almost like Creative don't realise this product exists!). Anyway, where can I download the latest firmware?

I think Creative should add the Sleek Photo to the player list in downloads and add the latest version there (I have version .0.0e). I ordered my player in December (for Christmas). There are a few issues that I have addressed in my "A few annoyances with Zen Sleek Photo 20GB (Request)" thread.
Sadly there has not yet been an update to fix the artist listings etc. as mentioned in my thread
I got in contact with another Creative Zen Sleek Photo user who also li'ves in Switzerland and has the same problems (tracks not been sorted correctly even with correct ID3 tags, which work in many many Windows applications).
By the way, sadly the Sleek Photo gets a load of dust under the screen too, unless you are very careful. I have been unable to remove most of the dust even using compressed air! I would rather not have to get it replaced because of this (unless Creative makes a slightly new casing model to prevent dust under screen) as I would probably end up paying rather a lot for postage (it's going indirectly through another company)
I hope there shall soon be a firmware update addressing these things,
Thanks for any response to this,
StephenRMessage Edited by StephenR on 03-07-20060:53 PM

Firmware for the Wireless Sound Blas

Similar Messages

Maybe you are looking for