Firmware history for HP DV9000 model dv9317cl

I recently acquired a DV9000 model dc9317cl laptop and I am trying to find the maximum amount of memory I can put in it. I have found several documents stating that 2gb is the max but there are also several others saying that after putting the latest firmware in a different model DV9000, they were able to put 4gb and even 8gb into it and it was recognized. I know the all HP documentation  says 2gb is the max but sometimes bios updates come out that allow different options and that doesn't really get documented very well. So I figure if I can find the history for the firmware for the DV9000 dc9317cl model, I would find exactly what has changed or been fixed. Right now I have F.38 bios which was the latest I could find.
Any help or info would be greatly appeciated.
This question was solved.
View Solution.

The DV9000 series goes up to DV99XX and the ones above DV9499 use a different motherboard,so no the memory limits will not be the same on all. Also some are Intel,some are AMD w/different motherboards.
For instance the DV2000/DV6000/DV9000 are all very similiar. I have a DV2810us which runs 3gb of memory from the factory -but it is in the series above DV2499. Now, I am not saying 100% that your model can't use more memory-but even Crucial memory site says 2GB is the limit for that model & that is the only configuration they will sell with guaranteed compatibilty.
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Similar Messages

  • Windows 7 Upgrade Guide for dv6000/dv9000 models

    Statement:
    You are using this guide at your own risk. I don't take any responsibility for any problems.
    Things which you should know and do before upgrade:
         1. HP may demand you to reinstall back Vista if you will have any hardware problems to troubleshoot them.
         2. HP will not help you if you will have any software problems because this models are not officially supported
              with Windows 7.
         3. Before you will upgrade to Windows 7 please make Vista Recovery CD/DVD. How to do it all informations here.
         4. All Vista drivers and pre-installed software by HP for your model are in C:\swsetup folder. 
              If you still have it on your HDD then copy this folder to CD/DVD. You may need them someday.
       5. Users with nVidia graphic card should check temperature of this device before upgrade.
            This way you will know is it working ok in Windows 7 too.
             How you may check your notebook CPU (processor), GPU (graphic card), motherboard or HDD temperature?
             To do that use HWMonitor (free and recommended) or Aida64.
    How to find out which model you've got and specifications for it:
          1. Click on Support & Drivers link. (Upper part of this page.)
          2. In search box type your laptop product number (p/n).
              Resource:
              How to Locate the Notebook p/n
          3. Under notebook picture you will find your notebook model name (example: HP Pavilion dv6205eu Notebook PC).
          4. On the same page click on Product Information -> Product Specifications and you will find all informations about
               your notebook hardaware.
    How to install Windows 7 and what you should know while upgrading:
          1. Guide: How to Do a Clean Installation with Windows 7
          2. All Windows 7 drivers you will find in next post below.
          3. Some drivers have comment then they are originaly made for Vista system.
              When normal installation will fail, then try to run unsuccessfully installed file in Compatibility Mode (Windows Vista,
              Windows Vista Service Pack 1 and Windows Vista Service Pack 2).
              Resources:
              Make older programs run in this version of Windows
              How to Run a Program in Compatibility Mode in Windows 7
    ** Say thanks by clicking the "Thumb up" icon which is on the left. **
    ** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **
    This question was solved.
    View Solution.

    CHIPSET DRIVERS 
    Solution on COPROCESSOR with yellow exclamation mark () 
    If you have Intel processor:
    Intel Chipset (Install and reboot before other drivers) here (ver 9.1.1.1025 for 32/64 bit Win7)
    Intel Rapid Storage Technology here (ver 10.1.2.1004 for 32/64 bit Win7)
    If you have AMD processor:
    For dv60xx, dv61xx, dv62xx, dv63xx, dv64xx, dv90xx, dv91xx, dv92xx, dv93xx and dv94xx models (example: dv6367am means that your model is dvx3xx, dv9421xw means that your model is dv94xx):
    nVidia Chipset (Install and reboot before other drivers) here   (Vista)
    For dv65xx, dv66xx, dv67xx, dv68xx, dv69xx, dv95xx, dv96xx, dv97xx, dv98xx and dv99xx models (example: dv6981tu means that your model is dv69xx, dv9721tu means that your model is dv97xx):
    nVidia Chipset (Install and reboot before other drivers) here   (Vista)
    Important information for users with nVidia chipset!
    If you have 4GB of RAM or more then check Microsoft knowledge base article about solution on some problems which you may have here.
    GRAPHIC DRIVERS
    Intel Graphic:
        Intel 950 and Intel X3100 here (ver 15.12.75.4.1930 for Win7 32 bit) or here (ver 15.12.75.4.1930 for Win7 64 bit)
    nVidia  Graphic:
      Important information!
       If you have installed any nVidia drivers for graphic card then before you will install other version you will
       need to remove old drivers first. Check below guide how to do it (this is not standard uninstallation
       process):
       How to remove nVidia graphic drivers from Windows system.
       Drivers:
        nVidia GeForce 8400M GS and nVidia GeForce 8600M GS:
             OPTION 1
             Version 267.76 here for Windows 7 32 bit or here for Windows 7 64 bit.
             OPTION 2
             Version 197.16 here for Windows 7 32 bit or here for Windows 7 64 bit.
             Note:
             Remember to uninstall previous graphic card driver first.
        nVidia GeForce GO 6150M, 7150M, 7200M, 7400M or 7600M:
              OPTION 1
              First try to install original Vista drivers for your model.
              Resource:
              How to find all Vista audio and graphic drivers for specific model on HP sites?
               OPTION 2
               If original drivers will not work then try modded drivers ver 195.81.
            Note:
            Remember to uninstall previous graphic card driver first.
            How to install them under Windows 7?
               1. Download driver here (for Win7 32 bit) or here (for Win7 64 bit) double click and select extract,
               2. Download from this site with drivers also INF Modified and replace original INF in extracted folder,
               3. Install & reboot.
         OPTION 3
               Last thing which you may do is installing graphic driver from Windows Update.
            Note:
            Remember to uninstall previous graphic card driver first.
         1.Open Windows Update by clicking the Start button , clicking ' All Programs ', and then clicking '
                     Windows Update '.
         2.In the left pane, click ' Check for updates ' , and then wait while Windows looks for the latest updates
                     for your computer.
         3.Select the ' Optional Updates ' and install from there only driver for your graphic card.
    AUDIO DRIVERS
    Conexant HD Audio
             Use original Vista drivers for your model.
             Resource:
             How to find all Vista audio and graphic drivers for specific model on HP sites?
    Realtek HD Audio 
             Use original Vista drivers for your model.
             Resource:
             How to find all Vista audio and graphic drivers for specific model on HP sites?
             If Vista drivers will not work well for You then try to use official Realtek one from here (for 32/64 bit Win7). 
             When you will enter this link check there "I accept to the above." and after that click ' Next ' button.
    MODEM DRIVERS
    Conexant Modem here (ver 7.61.0.0 A)   (Vista) - If you have Conexant audio card
    Motorola SM56 Modemhere (ver6.12.6.0 A)   (Vista) - If you have Realtek audio card
    HP QUICK PLAY 
    HP QuickPlay here (ver 3.7 v.6112 for 32/64 bit Win7)
    Notes:
    It must be installed before HP Quick Launch Buttons.
    You've installed this software and it hangs while using?
          Uninstall your current HP QUICK PLAY version and install this which you had in Vista.
          Resource:
          Uninstalling Software in Windows 7
          Uninstall or change a program in Windows 7
          If you burned CD/DVD with C:\swsetup folder as suggested in guide then you will find it there.
    HP Quick Launch Buttons
    Solution onKEYBOARD FILTER with yellow exclamation mark ()  
    HP Quick Launch Buttons here (ver 6.50.13.1 for 32/64 bit Win7)
    WIRELESS DRIVERS
    Intel Wireless here (ver 13.0.0.107 for 32/64 bit Win7)
    Broadcom Wireless here (ver 5.60.48.35  for 32/64 bit Win7)
    Atheros Wireless here (ver 8.0.0.316  for 32/64 bit Win7)
    HP Wireless Assistant here (ver 3.50.12.1 for 32/64 bit Win7)
    Bluetooth Wireless here (ver 6.5.0.2000  for 32/64 bit Win7) Only for models with Bluetooth.
    Note:
    How to install Bluetooth driver?
    Check the link below:
    How to install HP Bluetooth driver in Windows 7.
    ETHERNET DRIVERS
    Realtek RTL8101 Lan here  (for 32/64 bit Win7) Only for models with Intel processor.
    Models with AMD processors don't need to install any extra file for ethernet., because drivers for it are in chipset package.
    CARD READER
    Solution on BASE SYSTEM DEVICE with yellow exclamation mark () 
    Ricoh 5-1 Card Reader Driver here (ver 6.10.01.03  for 32/64 bit Win7)
    TOUCHPAD DRIVER
    Synaptics TouchPad here (ver 16.0.1.0  for 32/64 bit Win7)
    Note:
    By default is enabled Two - Finger Scrolling. If you want to use only one finger for scrolling then check the link below:
    How to change Two - Finger Scrolling on One - Finger Scrolling in Synaptics TouchPad software.
    ONLY IF YOUR MODEL HAS:  WEBCAM 
    Cyberlink YouCam here (ver 2.0.3115  for 32/64 bit Win7)
    Note:
    If you have any problem with your webcam then check below links to HP documents:
    Fixing Webcam Problems in Windows
    Testing a Webcam using Your Favorite Instant Messenger
    3VRX (optional software)
    on-screen visuals and associated sounds that are displayed and heard when adjusting volume
    3VRX here (ver 2.5 for 32/64 bit Win7)
    Note:
    Here is YouTube video which shows what can be done with this software.
    ONLY IF YOUR MODEL HAS:  FINGERPRINT READER
    1. Uninstall all previous fingerprint reader drivers and software
           Check below guide how to do it (this is not standard uninstallation process):
         How to uninstall AuthenTec fingerprint software and driver
    2. You may install now correct fingeprint reader driver and software.
           There are available two applications to this device:
            - AuthenTec TrueSuite
           and
           - DigitalPersona Personal (recommended).
           Information on how to install both softwares you will find in below guides:
           AuthenTec TrueSuite, AuthenTec fingerprint and Windows 7
         DigitalPersona Personal, AuthenTec fingerprint and Windows 7
    ONLY IF YOUR MODEL HAS: DVD DRIVE WITH LIGHTSCRIBE
    How can you check is your DVD drive with Lightscribe?
    On DVD panel there will be Lightscribe logo.
    LightScribe Host Software here (ver 1.18.22.2   for 32/64 bit Win7)
    Report of the changes which were made in the guide
    Edited  16-01-2010  Updated Synaptics TouchPad driver to ver 14.0.3.1, Updated Broadcom driver to ver 5.60.18.41
    Edited  18-01-2010  Updated nVidia Graphic section. Added drivers for nVidia GeForce 8400M GS and nVidia GeForce 8600M GS (ver 195.62)
    Edited  19-01-2010  Updated LightScribe Host Software to ver 1.18.10.2
    Edited  05-02-2010  Updated fingerprint drivers, software and added fingerprint guides.
    Edited  27-02-2010  Updated LightScribe Host Software to ver 1.18.11.1
    Edited  03-03-2010  Updated HP Quick Launch Buttons to ver 6.50.13.1
    Edited  20-03-2010  Updated Synaptics TouchPad to ver 15.0.9.0 (this version enables multitouch gestures)
    Edited  21-03-2010  Added two guides. How to remove nVidia graphic drivers from Windows system and How to install HP Bluetooth driver in
                                    Windows 7.
    Edited  25-03-2010  Updated LightScribe Host Software to ver 1.18.12.1
    Edited  26-03-2010  Changed Intel Matrix Storage Manager name to Intel Rapid Storage Technology, added Intel Rapid Storage Technology
                                    to ver 9.6.0.1014
    Edited  31-03-2010  Updated nVidia Graphic section with uninstallation guide, Updated drivers for nVidia GeForce 8400M GS and 8600M GS
                                    to ver 197.16
    Edited  10-04-2010  Updated LightScribe Host Software to ver 1.18.13.1
    Edited  04-05-2010  Updated LightScribe Host Software to ver 1.18.14.1
    Edited  05-05-2010  Updated Synaptics TouchPad driver to ver 15.0.13.0, Updated HP QuickPlay to ver 3.7 v.6112
    Edited  21-05-2010  Updated Bradcom wireless to ver 5.60.48.35, Updated Atheros wireless to ver 8.0.0.316, Updated Synaptics touchpad
                                    to ver 15.0.13.3
    Edited  24-05-2010  Updated HP Wireless Assistant to ver 3.50.11.2
    Edited  24-06-2010  Updated Synaptics TouchPad to ver 15.0.17.4
    Edited  30-07-2010  Updated Broadcom wireless - the same version but with some improvements, Updated HP Wireless Assistant to ver 3.50.12.1
    Edited  01-04-2011  Added drivers for nVidia GeForce 8400M GS and nVidia GeForce 8600M GS (ver 267.76)
    Edited  02-04-2011  Updated LightScribe Host Software to ver 1.18.22.2, Added one guide: How to change Two - Finger Scrolling on One - Finger
                                    Scrolling in Synaptics TouchPad software.
    Edited  14-12-2011  Updated driver for Intel® Rapid Storage Technology
    Edited  07-05-2012  Updated driver for HP Bluetooth to ver 6.5.0.2000, Synaptics TouchPad driver to ver 16.0.1.0, Updated guide: How to install
                                    HP Bluetooth driver in Windows 7
    ** Say thanks by clicking the "Thumb up" icon which is on the left. **
    ** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

  • CS-MARS firmware update for 25/25R models?

    Can you find the description for cs-mars_25R-25_fw_upgrade_SN06.iso.
    The link http://www-tac.cisco.com/Support_Library/field_alerts/fn63285.html proivided by Cisco is probably broken.

    The Cisco team mistakenly put an 'internal' URL on the MARS download website. You need to contact them to fix/provide the correct link.
    Or ask any friend in Cisco TAC to get the link for you
    Regards
    Farrukh

  • HT3939 what is the original firmware for iphone 3gs model number a1303?

    what is the original firmware for iphone 3gs model number a1303?

    What does it matter?
    What is the issue you are trying to resolve?
    The current version of iOS for the 3GS is 6.1.2.

  • Where do I get an SMC Firmware Update for my 21.5 inch Late 2009 iMac?

    Hello Apple Support Communities,
    I have a 21.5 inch, Late 2009 Intel iMac. Currently it is running OSX Lion. It is also running Bootcamp with Windows 7 Professional Installed. Recently the Hard drive crashed on me and I ordered a new generic Hitachi from an Apple Reseller. I took all the precautions and asked all the questions, but when I finished the hard drive replacement, the fans within the iMac started running on High. The other people in my office Hate this. I did some research and found that there is a firmware update for the SMC that I should be installing. I looked on the webpage where apple directs you to find out if you need this update, but I can't find my exact specs on the page (here is the page for reference: http://support.apple.com/kb/HT1237) I can only find an update for the 27 inch model. I tried running that one and the system tells me "This software is not supported on your system."
    Here are the specs that the page requested me to find:
    Model Identifier:          iMac10,1
    Boot ROM Version:          IM101.00CC.B00
    SMC Version (system):          1.52f9
    Someone please help, this has been bugging me for a while.

    I took all the precautions and asked all the questions,
    Then I trust you saw this before you did the replacement. Apparently, it's not just a question of getting a drive from the same manufacturer to use with the proprietary cable.
    http://blog.macsales.com/2751-proprietary-cable-can-put-the-brakes-on-upgrading- late-09-imacs
    It's acting as if the temp sensor is not connected. I have it bookmarked amidst thousands of bookmarks but can't remember the name right now. There is some program out there that, in the absence of getting data from the internal sensor, will regulate the fan speed based on the SMART temp. If I think of it, I'll post back.
    Here it is. It's meant for the 2011 iMac Apple drives, but I don't see why it wouldn't work in your situation.
    http://www.hddfancontrol.com/
    BTW, I think John Galt is thinking of the 2011 iMac drives, not the late 2009s, which are not quite as impossible.

  • 65 OR 90 WATT AC ADAPTER FOR HP DV9000???

    I aquired an HP DV9000 laptop, used, that came with the wrong AC adapter.  It fits loosely and frequently comes loosened to the point that I have to wiggle it for it to provide power. It quit providing power completely a few days ago.  I am done with that adapter.
    I started using the AC adapter from my HP V5000 and it is perfect, it seems?  It fits perfectly and provides constant power to the DV9000.  
    However, it is a 65 watt adapter, model # PA-1650-02H.  I have seen sites advertising the DV9000 adapter as 65 watts and also 90 watts.  I have seen some sites list both models - DV9000 and V5000 - using the same adapter and some sites do not list both models using the same adapter.  
    I am thinking since the DV9000 is a more powerful laptop it is wiser to go with a 90 watt adapter.  I am getting so much conflicting info, so I am confused as to which to buy for the DV9000?????
    Thanks for your input!!!!!!

    Hi,
    I have a DV9700t. The AC adapter is part number 393954-001 and the spare part number is 394224-001.
    My adapter is rated at 19V DC @ 4.74 amps ( amps times volts equals wattage) which is 90 watts.
    I have another laptop that has a 65 watt adapter and when the battery is run down the charger get fairly warm until the battery is fully charged.
    My recommendation is to go with the 90 watt adapter/charger.  It will recharge your battery faster.
    HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
    HP Photosmart Premium C309G, HP Photosmart 6520
    HP Touchpad, HP Chromebook 11
    Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
    Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
    Windows 7/8 UEFI/Legacy mode, MBR/GPT

  • Remote Supervisor Adapter II SlimLine Firmware Update for TD100

    According to Lenovo document 54Y6198 I should be able to go to http://www-947.ibm.com/systems/support/oem/td100.html and download the firmware updates for the Remote Supervisor II Slimline adapter we purchased for our new Lenovo TD100 server (Model 6429-18U).  However, the problem is that NONE of the links work and NONE of the files can be downloaded all I get is a web page listing a 404 error (Not Found).
    Naturally the adapter won't work without the proper firmware, please help!

    Try now, it works. there have been some issues which are fixed.
    Jan Solar
    Product Marketing
    (not a technical support)
    http://blog.lenovo.com/author/jsolar/

  • Feedback Thread: Firmware MU02 for BX100

    Please use this thread to provide any feedback for firmware MU02 for BX100.
    Firmware revision MU02 for the Crucial BX100 (all form factors) is now available. This firmware update applies to the BX100 SSD (all form factors), and should not be applied to any other Crucial SSD model.
    Visit this page to download the firmware update: http://www.crucial.com/support/firmware.aspx
    Release Date: 04/14/2015
    Firmware for the BX100 (all form factors) is being updated from version MU01 to MU02. The BX100 is updateable to this new firmware starting from previous versions using tools provided by Micron.
    This update will be mandatory cut-in for new product built in Micron factories, and is an OPTIONAL update for any drive in the field. For end users, it is recommended if the user is experiencing or wishes to prevent an issue related to the following items.
    Version MU02 includes the following changes:
    •Improved Device Sleep and Slumber transitions.
    •Corrected SMART attribute threshold values.
    •Improved general reliability and stability.
    Additional details can be found in the firmware guide

    I think that right now there are 3 ways firmware update can theoretically be done:
    1. Online update through Crucial Storage Executive - the proper firmware file is downloaded by Storage Executive from Crucial/micron server
    2. With Bootable ISO image provided by Crucial < the one you can download from firmware download page
    3. Manual Firmware Update through Crucial Storage Executive - you load the .zip file with firmware update package
    I believe that the problem with "3" is that Crucial does not provide .zip files with firmware update packages. The .zip files we can download contains bootable ISO images, not the firmware update packages. Because of that you are probably right that this option should be removed from Storage Executive's UI.
    I think that, technically, within the same firmware revision, updating with the firmware package would be the same as an online update where the firmware file is downloaded by Storage Executive from micron server.
    If the Storage Executive didnt' work for you I would suggest trying manual Bootable ISO, take a look at post #6.

  • Feedback Thread: Firmware MU02 for M550

    Please use this thread to provide any feedback for firmware MU02 for M550.
    Firmware revision MU02 for the Crucial M550 (all form factors) is now available. This firmware update applies to the M550 SSD (all form factors), and should not be applied to any other Crucial SSD model.
    Visit this page to download the firmware update: http://www.crucial.com/support/firmware.aspx
    Release Date: 01/8/2015
    Firmware for the M550 (all form factors) is being updated from version MU01 to MU02. The M550 is updateable to this new firmware starting from previous versions using tools provided by Micron.
    This update will be mandatory cut-in for new product built in Micron factories, and is an OPTIONAL update for any drive in the field. For end users, it is recommended if the user is experiencing or wishes to prevent an issue related to the following items.
    Version MU02 includes the following changes:
    Improved stability, Efficiency, and Performance during power state transitions
    Improved handling of environments with unstable power supplies
    Improved handling of environments with SATA interface signal integrity issues
    Improved response time for SMART read commands
    Corrected error handling NCQ Trim Commands
    Corrected reporting of SMART Attribute 5
    Additional details can be found in the firmware guide.

    Hejsana wrote:
    Hi everybody! Just downloaded MU02 Update, create a bootable CD from the ISO file, tried to boot my MacBook Pro 17" Mid 2010 with the created CD. After loading it automatically started programming... After some time I got the following message: "Firmware Update on /dev/sda failed with status 13... Device Name: /dev/sdaFirmware Update on /dev/sda Failed!CMD_STATUS: Command aborted by the driveSTATUS_CODE: 13Your system will now return to normal operation following a reboot" I thought that the CD is damaged. Took another CD and created another bootable CD. Got the same error. Am I doing something wrong? Thanks in advance for your suggestions...I haven't tried this as I'm using a different model of Macbook Pro and I'm not running a M550. But it seems that Crucial have made a major change from previous firmware updates for M4 and M500 SSDs. In the past they used a SYSLINUX/ISOLINUX bootloader which in turn used memdisk to load a FreeDOS image which contained FreeDOS and the actual firmware updater. This meant that if the CDROM installer didn't work, or the Mac didn't have a CDROM, there were no other options. This method never worked properly for EFI booting from USB in a Mac, although some "hacks" were suggested in forum posts that worked for some people. However it seems that now Crucial are using a different method.If we take a look at /boot/isolinux/isolinux.cfg DEFAULT sd
    LABEL sd
    KERNEL /boot/vmlinuz
    INITRD /boot/core.gz
    APPEND quiet base loglevel=3 waitusb=10 superuser rssd-fw-update rssd-fwdir=/opt/firmware rssd-model=M550This means it loads an actual linux kernel - vmlinuz. Now it should be possible to modify isolinux.cfg to change the kernel arguments to work better with the actual Mac hardware or any other hardware that is supported by linux. It should be possible to build a EFI bootable USB updater that loads the same kernel and firmware, but we can modify that with all the correct parameters for the Mac. Unfortunately I don't have the same model Mac or the same SSD, so while I might have a look at making the EFI bootable installer, I can't test the complete firmware update process. 

  • Feedback Thread: Firmware MU02 for MX100

    Please use this thread to provide any feedback for firmware MU02 for MX100.
    Firmware revision MU02 for the Crucial MX100 (all form factors) is now available. This firmware update applies to the MX100 SSD (all form factors), and should not be applied to any other Crucial SSD model.
    Visit this page to download the firmware update: http://www.crucial.com/support/firmware.aspx
    Release Date: 03/10/2015
    Firmware for the MX100 (all form factors) is being updated from version MU01 to MU02. The MX100 is updateable to this new firmware starting from previous versions using tools provided by Micron.
    This update will be mandatory cut-in for new product built in Micron factories, and is an OPTIONAL update for any drive in the field. For end users, it is recommended if the user is experiencing or wishes to prevent an issue related to the following items.
    Version MU02 includes the following changes:
        Improved stability, Efficiency, and Performance during power state transitions
        Improved handling of environments with unstable power supplies
        Improved handling of environments with SATA interface signal integrity issues
        Improved response time for SMART read commands
        Corrected error handling NCQ Trim Commands
        Corrected reporting of SMART Attribute 5
    Additional details can be found in the firmware guide.

    Will this  firmware be available soon in the Crucial  Storage Executive program? When I do a check firmware upgrade, it tells me I am on the latest firmware and do not see any downloads for JUST the firmware update file that i can then install manually via Storage Executive. I have the latest Crucial Storage Executive program installed and a 256GB MX100 on MU01. Also on a nitpicky note, there should be an Close, X in the upper right of the Storage Excecutive program for closing the program; having to close via right-click and close on taskbar or ALT+F4 is not very good software design practices. 

  • Buffalo's NAS firmware updated for Lion mac OS X 10.7

    New firmware available for Buffalo's NAS to be Lion compatible
    Time machine support to come (only thing still not working)
    here is the link to choose your NAS, then download Mac Intel text and driver files for installation.
    Exemple : Concerning my
    Buffalo Linkstation Duo 2To (France) model is "LS-WXL" it's here  :
    Text file to be read    / 3 Ko / July 25th, 2011
    Last Firmware (1.52) / 254,16 Mo / July 25th, 2011
    Don't forget to re-activate DHCAST128 before updating :
    see my post in french here for a step by step tutorial (to re-activate DHCAST128 it's at the very end of post).

    OK I found a free and easy solution.
    Since a lot of people report they are able to access their NAS using apps other than the Finder itself, I decided to look for a free Lion-compatible File Manager to use instead of Finder.
    I have found muCommander ( http://www.mucommander.com/ ) and indeed it works fine. All I did was click on the button highlighted bellow, go to "bonjour services" and select my NAS. It prompted me for my username and password and voilá, it works fine.
    I keep Finder for everyday use and just load muCommander when I want to access the NAS. At least now I don't have to start my WinXP VM anymore just to access it.
    Hope it helps you.

  • Latest Firmware Version for nokia 6300 via NSU?

    Hi, i am usuing 6300 with version 6.01. But i want to use 06.60 on my phone which already ezists but not available on NSU. I am wondering why the nokia haven't put this firmware (06.60) to NSU? I hope you can help me... Because nokia customer care gives standard answers.

    Maybe your phone is a branded version and the operator hasn´t approved the update yet...
    Check this website to see if there´s a new firmware available for your model:
    http://europe.nokia.com/A4577224
    Let us know what happened!
    By clicking the "Kudos!" or the "Solution?" button on the right you can say "Thank You" and you´ll show the author and others that the post is useful.
    The day we stop improving is the day we stop being good.

  • Which firmware file for ipad 3 a1430 64GB

    i want to download firmware file for above model but dont know its cell+wifi 64GB a1430 ipad 3, its in recovery mode and i cant able to restore on itunes as it always interuupted by my network, wana to download the ipsw so which file is compatible

    There is some troubelshooting for error 1611 on this page : http://support.apple.com/kb/TS3694
    This error typically occur when security software interferes with the restore and update process. Follow Troubleshooting security software issues to resolve this issue. In rare cases, this error may be a hardware issue. If the errors persist on another computer, the device may need service.

  • My macbook is running slow and i wanted to know which SSD is compatible for a 2009 model macbook pro??

    my macbook is running slow and i wanted to know which SSD is compatible for a 2009 model macbook pro??

    GitongaKuria,
    several people here use Crucial, OWC and Samsung SSDs. I have a Samsung 840 PRO SATA III SSD in my Mid 2010 MacBook Pro, and your 2009 model and my 2010 model both have SATA II interfaces — these brands of SATA III SSDs (at minimum) work well in MacBook Pros with SATA II interfaces. In the case of the Samsung 840 EVO SSD, make sure that you visit the Samsung SSD firmware page to download and install its latest firmware.

  • Firmware Update for WAG200G to fix Security Hole

    Hello,
    I use a Linksys WAG200G with firmware version  1.01.09, and recently became aware that this particular model has a publicly known exploitable backdoor (See: http://www.businessinsider.com/cisco-warns-about-security-hole-2014-1 for more info). 
    Has this security hole been fixed? If yes, where can I download an update for it?
    Thanks for your time,
    Sam

    Thanks for the advice to contact HP tech support!
    I have tried in multiple ways since November 2009 to contact HP, when I got the first (of 4) printers. The first 3 printers was subsequently replaced.
    Finally in late June 2010 I got the message that there was coming an firmware update for Windows, but not for Mac's. The firmware should improve among other things the paper pick up (load paper issue) and the print-heads life.
    I have applied the Windows firmware on the printer from a pc, but still seems to have load-paper issues, even using HP Bright White paper, when printing from Mac's. I have not tested the printing from a pc, but assumes that a firmware upgrade the printer, and are not specific to a certain OS.

Maybe you are looking for