Firmware Loading Problem on my Zen V Plus

My player went into recovery mode and I have been attempting to load the firmware? ZENVPlus_PCFW_L22__32_0, but the attemp keeps failing.
Any help would be highly apprecited
Thanks

next time it froze, just use a paperclip to push into a hole before below the on/off switchtry this link

Similar Messages

  • Problems with Creative Zen V plus software

    *Problems with Creative Zen V plus software Dear friends,
    I'm trying to install the software included with creative Zen V Plus but it is not possible - it stops at 63%
    I get this following error:
    "CTIntrfu.dll can not be installed"
    "DoInstall fails to launch E:\PDE\CTXInst\Setup.inx"
    I'm using "Windows XP 2002 home edition - serivce pack 2"
    I'll appreciate any help.
    At the moment my PC doen't recognize the Zen V
    Sorry for my english... It's not my language.

    Hey Guys,Here is a link to instructions on how How to obtain and to install USB 2.0 drivers in Windows XP Service Pack . http://support.microsoft.com/default...;EN-US;Q329632?Win2000 and later have the capability to support USB 2.0, but USB 2.0 was released after XP was release, so there weren't any drivers installed before Windows XP service pack 2. Make sure you've installed all your windows updates including service pack 2. You can check if you have SP2 by right-clicking on my computer and choosing "properties", it will say on the general tab. Also the way to tell if you have USB 2.0 drivers installed is to right-click on my choose "Manage", then choose "device manager" look down to "uni'versal serial Bus controllers" and click on the + . This will expand the USB devices. Look for the word "enchanced" (USB enhanced host controller). If you see it, then you have USB 2.0 support. If not, use the link above and get the drivers. Hope this helps!?JT

  • Fm radio problem and speakers zen nano plus..

    . Why does my zen nano plus automatically turns of when i use the fm radio even if it has full battery?
    2. Why does my zen nano plus automatically turns of when i connect pc speakers even if it has full battery?
    I NEED HELP!!!!!!!!!!!!!

    Try reloading the firmware for your Nano Plus - that sorts out most problems with these players. Go to Support, Downloads and choose MP3 Players, Zen, Nano Plus. Make sure you follow the instructions carefully.
    PB

  • Problems running creative zen nano plus and nomad muvo on same compu

    We have 2 nomad muvo mp3 players and now a zen nano plus .Have had constant problems with the media organiser .
    Installed zen nano plus and selected enable smart fit to get maximum amount of songs and it worked fine but as soon as we tried to install software for the 2 nomad players it would not work smart fit for any of them.
    Uninstalled everything and got the zen software in and it was running ok but then seemed to have problems and although smart fit was enabled it just copied files as the original mp3.
    It then fatally crashed yesterday and I am awaiting a replacement as I had only had it for 2 days.
    Is it possible to run all 3 and to be able to use smart fit on all 3 players or am I better off having just one working and using the file converter for the other 2.

    <FONT face=Helv size=2>
    Make sure that you have installed the MediaSource plugin for MuVo in order to get SmartFit You have to access SmartFit via the MuVo node of the Sources window in MediaSource. You won't see SmartFit if you access your MuVo via the My Computer node of the Sources window in MediaSource..
    Here is what you should do to get the latest MediaSource software:
    - Download and install the latest Creative MediaSource Player/Organizer 3.30.2 from your product download site.
    - (Depending on your firmware)
    Download and install the latest Creative Zen and NOMAD Jukebox plugin 2.00.9 for Creative MediaSource from your product download site.
    or:
    Download and install the latest Creative MediaSource Plugin for PlaysForSure devices (version .00.8) from your product download site.
    - Download and install the latest Creative MuVo plugin .0.05 for Creative MediaSource from your product download site.
    - Download and install the latest Creative MediaSource Plugin for CD Burner 3.0.8 from your product download site.

  • Problem with Creative Zen Nano Plus 1 GB mp3 player please r

    I bought zen nano plus? month ago and while i was transfering music into it it crashed ,? it looked like its no more readable so i disconected it from my pc , it needed format , i did format and tried to transfer some music again but the same problem appeared . I thought the memory card of the player is damaged and needs to be changed or repaired? , i gave it to customer support and after a few days they said they installed newer software version to the player , well i thought it will fix the problem . Once i got home i tried to transfer music and it crashed again , i couldnt even format it cause when i plug in the mp3 F: ( usb dri've ) does not respond. I gave the mp3 to customer support again , they filled up the mp3 with music six times and everything worked fine. But at home it still crashes while transfering , so i dont know what to think . On the packet where the mp3 was when i bought is written WORKS WITH WINDOWS VISTA ,?currently i have windows xp ,? can it be that i can only transfer music without prloblems with windows vista ? can it be that zen nano plus is created to use with windows vista ? Thanks for reading !

    Did you install the driver on your PC? If not, then do it. Try reformatting the player as FAT. Next try tranferring a few folders full of mp3 files. Use windows explorer to drag and drop the folders? with files to the player. Now see if the player will play them.

  • Problem related to Zen Nano Plus detect

    I tried to upgrade my firmware version. Then my PC hanged so it shut down itself, then after that, my nano plus can't be detected and can't be turn on. Help me, or at least, do anyone of the people here has some phone number for the creative support in the philippines?
    Thanks

    View all knowledge base solutions for your player? http://support.creative.com/Products...=ZEN+Nano+Plus

  • Problems with my Zen V Plus! HELP

    I will never ever buy a produckt from creative again, my mp3 is always broken, as soon as i fix whats wrong, another problem shows up.
    . My mp3 player will not be detected by my computer so I cant fill my mp3 with music, how do I fix this?
    2. Every time I turn on my mp3 player, it says "Re-Building Library" and whatever I do, that message won't go away, what do I do?
    If anyone could please help me I would be very happy!

    hi i dont know if you fixed this problem but i had the same thing happen so i did this and it works nowso hopefully it works for you?[*]Detach your player from the PC or charger?if it is connected, and turn off the player. If the player stops responding, you can reset the player. To reset the player, gently insert a thin object into the Reset hole located below the power switch.
    <[*]Press and hold the Play button while powering on your player.<[*]When the player displays the Creative logo, release the Play button. It will display the following options:
    <!-- #EndLibraryItem --><!-- #BeginLibraryItem "/Library/RecoveryOptions.lbi" -->Clean UpScans the player and removes invalid links from its music library.
    Does not affect music files themselves.
    Format (All)[color="#ff0000"]Caution! Erases all content!
    Save a copy of your player's content before formatting.
    Reload OS/ Firmware[color="#ff0000"]Caution! Erases your player's firmware.
    [color="#ff0000"]DO NOT select the Reload Firmware option unless you have access to a PC and you have downloaded the necessary firmware to install.
    RebootReboots the device.<[/list]

  • HP Business Inkjet 3000DTN Color Printer Firmware load problem

    I downloaded a firmware upgrade from HP for my 3000DTN printer and began the "relatively simple process" of flashing its BIOS.  The lovely little critter's display indicated that the flash was successful, but upon restart ... well, it never really has restarted. 
    Does anyone know how to access this printer's BIOS directly through either the TCP/IP port or the USB or the Parallel port, so I can try flashing the BIOS again? 
    It's actually a great printer and I flashed the BIOS to get rid of an annoying error message that the HP update said it would clear.  So much for clearing a simple annoyance!  UGH!
    Thanks to any who may provide guidance.
    Rich

    It seems you need to replace magenta as well.  The BIJ 1200 has separate printheads and plumbing, it requires ink in each color to prevent damage to the ink supply system and printheads.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Creative Zen Nano Plus Firmware Problem, AGAIN! (PeeBee HEL

    Hi all,
    I am new here and have read all the posts and FAQ's but couldn't solve my problem. Actually there is a post http://forums.creative.com/creativel...d=68923#M07024 which tells exactly my problem. Have tried the solution but didn't solve it.
    So I am here asking again.
    I bought a zen nano plus GB and downloaded the latest firmware(ZenNanoPlus_PCFW_LF__0_03.exe) and the latest mass storage driver (MStorage_PCDRV_LB__07_00_250.exe). When I put the player in recovery mode as the firmware is detecting devices the player takes it self out of recovery mode and back in mass storage mode how do i stop it from down that?
    I am trying to update it because my player doesn't play wma files :angry:I have tried PeeBee's solution but it didn't work. I have taken the battery out, reconnected it and it is recognized in recovery mode. I run the firmware and the computer plays a sound, the icon of connection appears in the nano's lcd and it is out of recovery mode. Then firmware program tells me that the 'device state is not set' and after that the message 'put into recovery mode before updating firmware' Aaaaaarrrrrghhhh!
    I'm also running windows XP SP2
    Can anyone help me?
    Thank you in advance
    Marcelo Lopes
    Rio de Janeiro - Brazil

    Hello-
    I had a similar situation develop. Did your error message say, "Media state not initialized?" Here is what the creative support site says:
    If you receive a message "Media State is not initialized ..." while updating firmware for a MuVo or Zen Nano Plus player, it will be necessary to install the Player Recovery Device driver and then update the firmware.
    . Download the latest driver if you have not done so. You can download it from http://us.creative.com/support/downloads, and file name is MStorage_PCDRV_LB__07_00_250.exe.
    2. Install the latest driver by double clicking on the file name.
    3. Unplug the player from a computer if it is plugged.
    4. Remove the battery from the player (except Zen Zeeon which has a built-in battery).
    5. Press and hold the Play button while connecting the player to the USB port.
    6. Continue to hold the Play button for about 0 seconds after connecting your player is connected to the USB port.
    7. Keep on holding the Play button till Windows displays the Find New Hardware dialog box.
    8. If this is the first time a player is installed as Player Recovery Device, Windows will find a Player Recovery Device (or USB Device), and prompt you for drivers. Click on No, and select "Do not search. I will choose the driver to install". Windows will install the drivers automatically.
    9. Double click on the latest firmware upgrade file that you have downloaded previously, and follow the instructions on the screen.
    0. Format the player if you are prompted to do so.
    It is recommended that you stop your player properly before physically disconnect it from your PC.
    To stop your player in Windows XP, Windows 2000 or Windows ME
    Click on the Safely Remove Hardware icon on the Taskbar, click Safely remove USB mass Storage device, and disconnect your play when you are prompted to do so.
    To stop your player in Windows 98SE
    Make sure that the icon below appears on the LCD screen again for at least fi've seconds before disconnecting your player.
    Now, I did all of the above and still got the error. What solved the problem finally was to connect (using the above method - remove the battery - hold the switch, etc) to a DIFFERENT USB port. Then all worked well, and the firmware transferred. Don't ask me how or why.
    Good luck.

  • Zen Stone Plus FF and Rewind problems

    I have a Zen Stone Plus and I upgraded to the new softeware and firmware. I can not use my fast foward or reverse button. It's like I didn't even press them. They don't go foward or back so as I am listening to a book, if I missed something I can scroll back. The up button makes the speaker louder and the down button makes the speaker lower but there is no FF or rewind.Can I have this fixed? Does anyone have a solution?
    Diane
    [email protected]

    ) I have a similar yet slightly different problem: on my zen stone plus (with speaker) I can rewind, but when I FF the behaviour is actually the same as if I were pressing the rewind :smileysurprised: Anyone have the same problem? This is really bad for long files, like podcasts and also when I update the player (i.e. adding and removing files) which 'forgets' the previous playstate.

  • Creative LAB, How to load songs to Zen V Plus from MAC OSX 10

    Hi CAT,
    Recently I bought a new zen v plus and I've a power mac computer and work on Mac OSX 0.4, I would like to know that can I load the songs to zen v plus from my mac computer and charge the same via the front USB.
    Plz tell me and reply me soooooooon
    Thanks& Regds,
    2Creative

    2creative2006,
    The system requirements are listed on the box, OSX is not supported. Perhaps there are unofficial ways, but someone else will have to advise on that.
    Cat

  • Problems with my Zen V P

    Hi there, I was wondering if anyone could help me sort out a problem with the Zen V Plus that I bought a couple of months ago. Today the battery ran out so I plugged it into my laptop and left it to charge. After?a few hours I checked how it was going, and it was nearly full, so I decided to leave it for a bit longer so it could top?up completely. However, when I came to stop the charging, I discovered that the device no longer responds to any button that I press. Also, it isn't detected by my computer when its plugged in. I have charged it'sbefore with no problems.
    Please help!!!Message Edited by VeganGirl on 09-5-20070:47 AM

    http://forums.creative.com/creativelabs/board/message?board.id=dap&message.id=92346#M92346
    hi guys,
    i have a solution
    firstly connect your pleyer to pc
    then press the reset button and hold it
    while holding the reset button turn it on by using the power swich [Image]
    then your player will turn on

  • Zen Nano Plus - can't move music to it all of a sud

    My daughter has had a Zen Nano Plus for about 4 months - no problems up to now. She wanted to put some new music on it, and no matter what we try, we get an error - Transfer error - an error has occurred while transferring this file. I've tried it using a variety of software as well as drag and drop. We just bought my other daughter the identical player, and I can move music to hers with no problem - so it's not the computer or the connection. Any ideas? The player works fine with the music that's on it. Any ideas, or is it RMA time? Thanks!

    Hi. What sounds like the same problem has happened to me my first time using the player. It's basically behaving as if it's full, when there is over 6MB of free space left. I read a thread on Amazon (from where I bought the player) and apparently this is a common problem with the Zen nano plus, so Amazon can't/ won't replace players with this defect :-( Do any experts out there think that the response to this problem could fix my issue too? So from now on I should transfer files into folders, instead of trying to transfer 500 songs all in one go? Cheers!

  • Zen Stone Plus S... SLOW-FF speeds...ANYO

    I owned a Creative Labs Zen Nano Plus, before my dog used it as a chew toy. I then purchased a Creative Labs Zen Stone Plus S (2GB with speaker), which I love. I clip it in my hardhat at work and listen with the speaker. My old Nano would FF through a 5 hour long mp3 in a couple of minutes. I record the Howard Stern show from a Sirius Satellite Radio Online Subscription and put it on my CL Stone Plus S.
    Anyway if I bump the settings and have to go back to the halfway point, it takes FOREVER to FF. The FastForward feature is soooo slow. Is there a fimware update or setting to increase the speed? It dri'ves me absolutely crazy. To get to the third hour of a fi've hour mp3 it takes 45 minutes. Does anyone have any ideas or info?
    Thanks, Mrwirez

    ) I have a similar yet slightly different problem: on my zen stone plus (with speaker) I can rewind, but when I FF the behaviour is actually the same as if I were pressing the rewind :smileysurprised: Anyone have the same problem? This is really bad for long files, like podcasts and also when I update the player (i.e. adding and removing files) which 'forgets' the previous playstate.

  • My Backlight for my Zen V Plus is Dimmed and the Now Playing image is burnt on the screen!!

    I already tried changing the contrast! It's @ 00%! And the image isn't burnt on the screen because i left it on too long. I already thought of that and i never leave it on for more that an hour and a half at a time and i have it on the setting where if the player is left idle for fi've minutes it shuts down automatically. PLEASE HELP!!!!!!!!!!!!!!!!!!shiftone!!!!!

    Kok Choy,?I have a similar problem with my Zen V Plus. I turned it on this afternoon and the screen backlight is not working. I can see that it's on (and the music plays), but the screen is so dim you can't even tell that it's on. The US Tech Support link takes you here: http://us.creative.com/support/custsup/services.asp?But the link to the email support is broken and there is no phone number. Would you let someone know?Thanks,William

Maybe you are looking for