Firmware Release Confus

There are two ways to acquire the latest firmware downloads for your Creative Zen (flash) MP3 player.
One way is to go to Creative's "Support" then "Downloads" and choose your player type and download
and install the firmware update. The other way is to use the convienent "MP3 Recovery Tool".
There are several ZEN MP3 flash players MISSING? from the support/download page - The 2 GB & 32 GB.
There are several ZEN MP3 flash players MISSING? from the "MP3 Recovery Tool" - The 2 GB & 32 GB.
There are several ZEN MP3 flash players MISSING? from the "MP3 Recovery Tool Sticky" - The 2 GB & 32 GB
Does this firmware release <.2.0> ALSO applies to the 2 GB & 32 GB Zen's?
If so, Creative please update your "supported players" under "MP3 Recovery Tool" & "Support"/"Downloads" and the "MP3 Recovery Tool Sticky"
If not, tell the forum users where is the latest firmware for their 2 GB & 32 GB Zen MP3 players?

I have both the 2gb and 4gb Zen and the firmware are basically the same. The Support/Downloads of the Singapore site actually shows the full range from 2gb to 32gb and I am not sure why they are not reflected in the US site.
See http://sg.creative.com/support/downloads/?

Similar Messages

  • N95 8GB Firmware release 20.0.016

    New firmware release 20.0.016 for N95 8GB is out and installed. The fixes are, an inhansment in the browser and there is a new feature add which is a screen rotate. Congratulation guys.

    27-Apr-2008 12:24 PM
    foneguru wrote:
    That would depend on your product code, but most of the product codes now has an available update for v20.
    My product code is 0557651.
    Any idea? Thx.

  • N80 new firmware release date and wishlist

    It has been no update on firmware since the latest release V.5.0719.0.2 for N80 since 24 May 2007. With so many models rolling out and firmware revision released for other new and old models, one might wonder if N80 is being forgotten and the firmware revision is put on-hold forever in cold storage?!
    There has been so much discussion on the expectation for last firmware release but what we get is only product stability without signficant boost of functionality and performance. I believe this has made many proud owner of N80 phone waiting with a long neck.
    After reading through the forum, I have summarised some of the common expectation on the next release (hopefully) in a wishlist below. All is welcome to provide input on the improvement they expect in next firmware release. It is also hope that any status of firmware upgrade for N80 news to be shared here.
    The N80 new firmware wishlist
    i) AD2P bluetooth profile support
    ii) Nokia Maps application support (currently, N80 is not support model for Nokia Maps application)
    iii)Enhanced digital music player (similar with N73 ME with album art browsing)
    iv) Music file IDD tag editing (change artist, song title, genre information)
    v) Video ringtone
    vi) Skype VOIP support
    vii)Mymobilesite.net intergration for seamless moblogging interface
    viii)Auto birthday reminder storing from Contact entry
    Thats all I can think of for now.
    was: 3310--> N80 v5.0719.0.2--> N82 v31.0.016; now: 5800xm v40
    KeN82Ny

    Hi Jacob,
    Thanks for your quick response but if you go to the download section of Nokia Maps, N80 is not listed for selection on Nokia Maps setup file download. It is obvious that the compability page does show N80 is supported but which setup version to choose? I myself have Nokia Maps installed previously. But I believe there are new feature and interface in the latest version of Nokia Maps.
    Yes, mymobilesite.net is available for N80, but perhaps the new firmware can include it in the new firmware release to save other the hassle to install
    something to add:
    ix) HSDPA mobile internet surfing speed (3.5G?)
    was: 3310--> N80 v5.0719.0.2--> N82 v31.0.016; now: 5800xm v40
    KeN82Ny

  • N91 RM-43 4GB New Firmware Release Date!

    To:
    - Nokia Moderator
    - Firmware Teams
    - Support Discussions Users
    1. When will there be a New Nokia Firmware Release for the Nokia N91 4GB Edition?
    2. Is v3.00.060 RM-43 8GB Firmware Compatible with N91 RM-43 4GB Edition?
    Thank-You
    If you find my post useful then click on
    Kudos!Nokia N96 (v20.050 / RM-247)
    www.shaysoft.net | Competitions!

    Hi Shayesta
    Unfortunately the Moderators and administrators will not have this information available to us. This is a user to user support forum, therefore you will not receive direct feedback from Nokia through this channel.
    However, one of our many users may answer your query if they have information them selves. Alternatively you can contact your local Nokia support team if you wish a direct answer form Nokia.
    Regards
    Mohjo

  • Does anyone know when will sony smartwatch 2 firmware release

    Does anyone know when will smartwatch 2 firmware release becouse i have problem with sw2 but still there is no firmware for smartwatch 2.pls tell me

    there is a big update coming, but since Sony doesn't communicate with their customers, no one but Sony knows when it will arrive
    check here: http://www.xperiablog.net/2014/03/03/big-smartwatch-2-update-coming-1-0-b-4-80-brings-new-watchfaces...

  • Announcing UC320W 2.2.2 GA firmware release

    WHAT:
    Today  we are announcing the General Availability of the Cisco UC320W 2.2.2  firmware feature release.  Features and bug fixes are described in the  2.2.2 release notes found here. 
    WHEN:
    The 2.2.2 firmware version is available via the Cloud today.   This will be posted on CCO shortly.
    HOW:
    Log into the UC320W Configuration Utility on a system that has the WAN  connected.  The 2.2.2 firmware version will appear as an upgrade option.
    If  you are on a release version lower than 2.1.2, please see this  discussion for more information and a workaround for the Adobe Flash  Player version 11 compatibility issue:
    https://supportforums.cisco.com/thread/2112911
    Please see the below release notes for upgrade instructions.
    Release notes for the Cisco UC320W 2.2.2 firmware release can be found here.

    I strongly agree with you Donald. Most other vendors kit will support this feature. The ability to add/remove dialed digits for things like carrier LCR would also be very useful on top of automatic route selection(ARS).
    For example,
    End user dials 9 01392XXXXXXXX
    But the PBX actually sends to carrier 162 01392XXXXXXXX
    (162 is the access code recognised by BT for Energis LCR)
    Thanks
    Matt

  • What improvements are being made in the next SA500 firmware release?

    I have noticed that there is a release candidate firmware release available for the SA500 series. What improvements are being made in the next SA500 firmware release?

    The improvements are around VPN and NAT.
    The best way to get more details is to look at the release notes which come with the RC1 trial.
    You can send me a private message and I can forward you the release notes if you preferred.
    Regards,
    Richard

  • My iphone 3g is at 3.1.2 atm and I want to update to its final firmware release which is 4.2.1...will I still be signed by apple servers?

    my iphone 3g is at 3.1.2 atm and I want to update to its final firmware release which is 4.2.1...will I still be signed by apple servers?

    Yep.

  • No dashboard access after Firmware Release 1.05.36

    I purchased the EX4 about a week and a half ago. Hooked it up and all went fine. From dashboard I did firmware updates. First two went fine as I was able to get back in via dashboard. Then I did the FR 1.05.36 (the one that has you unplug) When it came back up I could no longer get to it via dashboard. The following is what I observed: No web access with browsers using ip address or machine name after Firmware Release 1.05.36 (7/8/2015) Windows Explorer shows WDMyCloudEX4 under Media Devices and storage. Public, Smartware and Timemachinebackup folders shown and accessible as well. I can copy files to it and retrieve files from it. WD My Cloud errors with failed to connect message. But it also shows Previously Connected Devices which is WDMyCloudEX4 and shows correct ip address of EX4 (same ip as shown on front display). WD Discovery shows EX4 Browse Network shares works but configure does not. Again no web access. mcp4_windows_setup cannot access EX4 either. Twonkey Media Server is accessable and functions just fine. So I technally don't have access to EX4 via dashboard. So evewrything works just fine except for dashboard.

    Yes I have turned off and back on and performed 5 sec reset with paperclip. But I have been reading about a 40 sec reset. Is that for real and do you perform? I read many different ways to do it.

  • Latest WRT610N Firmware Released 7/28/09 Breaks Mac Support.

    Applied the latest WRT610N Linksys router firmware released on 7/28/09 and Mac support is now severly impaired. Web pages load FAR FAR more slowly. So please avoid it. It works fine with PC but not Mac.

    It is slower on N, slower on G and even slower when connected via ethernet. Slow web browsing all the way around.

  • Apple pls look here: Some "quick wins" for the next firmware release

    Hi!
    First of all: Thank you, Apple, for Update 1.0.3! The most annoying bugs are fixed and the click wheel works better (but in my opinion the quick wheel of the iPod nano works still even better).
    Please allow me to suggest a few "quick wins" you could easily (in my opinion) include in the next firmware release:
    + Please add an option to turn off that "screensaver" or to change the time until it turns on
    The "screensaver" wouldn't be that bad when:
    + It would display "now playing" information in a large font (better readable than the normal "now playing" when the background light is off
    + The screensaver clock would display 24h format, when configured
    Best regards, Jens

    It's a waste of time posting this here because it's a user to user forum and no-one from Apple (except maybe the forum moderators) will see it.
    Please use this link.
    iPod Feedback.

  • I'm looking for a new Camileo's firmware release

    Hello everybody in this forum.
    I own this nice camcorder (with 5.2 CMOS) from five months, and wondering if a new firmware relase is available or not.
    I experienced some problems using this device as MP3 player:
    1) the "folder navigation" is not possible, so to organize my MP3 collection in the SD card using folders is not allowed, and I'm forced to put all the files in the MP3 folder, with a great confusion when I try to listen two or more albums from different artists.
    2) if the MP3's name is too long maybe that Camileo reset itself or simply warn user that the file you trying to reproduce is corrupted. Using a shoorter name may solve this issue.
    3) I would like to know the correct way to create a MP3 file fully compatible with the Camileo's firmware (CBR, VBR, 128, 160, 192 kb/s ???).
    Please let me know.

    Hi mate,
    unfortunately there is no firmware update available, so you would have to arrange yourself with the limitations till a firmware update will be released.
    Regarding point "3)" from your questions:
    I would encode all mp3s you want to listen on the camileo with a fixed bitrate like 128kbs because the quality is medium->good and they dont need so much diskspace. By the way: 128kbps is aa bsolutely standardbitrate, so I think you cannot do anything wrong when keeping them at this BR.
    GReets

  • WRT610N Firmware Release Notes

    Hi All,
    Where can I find the release notes for the new firmware version? It is not clearly stated in the linksys website (http://www.linksysbycisco.com/US/en/support/WRT610N/download).
    Even though I selected my hardware version 1.0, I can only see on the release note the v2.0 as the initial release (which is obvious that is not true).
    Regards,
    AK

    The release notes are confusing. This firmware is supposed to be working on both hardware v1 and v2, but firmware v2.0 is about the 4th published firmware for the WRT610N v1. Hopefully, they will correct it so that users don't think they have mistakenly downloaded the v2 firmware (even though in this case they are the same).

  • Firmware Release Notes

    My company has just received a number of new BB 9300's and I've noticed that the firmware isn't up to date on them.  So I've downloaded and installed the latest firmware (977), but can't find any release notes to say what's been fixed/improved.  Can anyone point me in the right direction?
    Regards, AStaley.

    It is extremely rare that OS upgrade release notes are even leaked to the public, and most often only the carriers themselves are given any release notes.
    So, no, there is no where to point you to. Your best bet is read other users' experience with the release version you intend to upgrade, check forums like Blackberryforums.com and Crackberry for threads whith more information.
    Good luck.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • New E4200 firmware release?

    does anone know when the next release will be out?  I have sorted out all the kinks but still loose my media server once in a while and need to reboot the router to get it back.   I am using the latest release.   NOthing seems to trigger the loss of the TwonkyServer Media Browser it just dissapears and is not accessable untill I reboot but that takes a long time for the router to rescan the external drive all over again.   
    please fix the E4200 media server in .02 firmware

    What is the current firmware on your Linksys E4200 ?
    I think  there is a release of firmware for Linksys E4200 .
    Check this link .

Maybe you are looking for