Firmware Update 1.5 won't install?

When I try to expand BluetoothUpdate1.5.pkg, It blows back error #17530 (a folder was specified when a file was required). What gives?? Thanks in Advance

Thanks All for my replies (in both forums). Family biz kept me away for a while. Been following the 'Bluetooth Wars' & I'm sure my problems are software related. I even tried a Iogear dongle that my nephew sent me, but to no avail. Since this a Skype issue I believe the quickest (& cheapest) way to go is a Logitech USB desktop mike & call it good. I'll cross the Bluetooth bridge later when I get an iPhone. I'm a bit surprised that a 3rd party developer hasn't jumped into the fray with a Haxie or something to fill the gap!

Similar Messages

Zen Xtra fails PlaysForSure Firmware update - Now it won't install a firmw

Zen Xtra 40 - Was upgrading from .30 firmware to 2.0.03 to support WMP and VistaFirmware Upgrade to Failed to Complete
Downloaded and ran PlaysForSure Firmware 2.0.03
It identified my Zen Xtra and started the upgrade, Zen Xtra rebooted and just sat there. 2 hours later I disconnected Zen Xtra and its in Recovery Menu. Reboot says Firmware Problem and goes to the recovery menu again.
If I plug it back into my system it says it found a 20mb 'Portable Device' MTP and lets me open the device but nothing is on the 20mb partition.
If I run PlaysForSure Firmware 2.0.03 again it says I must plug in the device, even though its definitely plugged in and recognized as an MTP device.
Seems like the PlaysForSure Firmware 2.0.03 isn't designed to identify the device after a partial upgrade? Tried older .30 Firmware install program, it can't identify the device either. Device shows up in Device Manager as Nomad Jukebox Zen Xtra using a Microsoft Driver.
I've installed the latest JB3MV2_PCWDRV_US_2_0_00.exe drivers and it does not help. Device still detects as a Nomad Jukebox Zen Xtra. If I uninstall Windows Media Player it won't install any drivers and won't accept the PCW Driver either.
Where can I get a firmware updater that will function when my Zen Xtra wants to be an MTP device?I tried another computer with WM9, just PCWDRV 2.0 drivers, and it will not detect and install the drivers when I plug the device in. Says it can't find suiteable drivers for this device.
Tried Cleanup, Reload OS, Reboot.
Boot v.4 and HW v0.0. Any ideas?

Wow after searching hundreds of documents on this forum I got my firmware updated
!!! I took my notebook, which I had recently upgraded from WMP9 to WMP after I could not get it to recognize and upgrade my Zen. I uninstalled WMPI uninstalled WMP RuntimeRebootedI went to Microsoft and get WMP0 specificallyInstalled it and closed itI ran the ZenXtraPS4Audible_PCFW_LB_2_0_03.exeOn the Zen I selected Reload OS, I click to have it reload OS, while it was doing that I plugged it into the notebook. The Firmware Tool Detected the Device again!!Current version 2.0.03Upgrade will be 2.0.03I click Upgrade!?It upgraded this time!!?The bummer is ALL MY MUSIC is wiped off my device. I didn't format it, but I guess the upgrade does it for you. Which means I just lost hundreds of dollars worth of songs since WMP doesn't have a license transfer and all my music was on the ZEN. So even though I have the files on my computer, they won't play because I don't have the license any longer.

Thunderbolt display firmware update 1.2 won't install correctly

On Friday 11/13/2014, I received a Software Update notification in OS X Yosemite 10.10.1 that there was an update available for "Thunderbolt Display Firmware Update 1.2". I tried installing this several times, but every time it tells me "The Thunderbolt Display Firmware Update could not complete." Now I have 6 failed install attempts showing in Software Update, plus still the still to be installed update itself.
If I click on the "More info" button in the failed installation message, it takes me to this page: About Thunderbolt Display Firmware Update 1.2 - Apple Support
On that page it suggest to check the "About this Mac" info for Thunderbolt Display, where "The Firmware Version should be 26.2 and the Port Micro Firmware Version should be 2.0.7 after the update."
My Thunderbolt Display is currently on Firmware Version 22.2, with Port Micro Firmware Version 0.0.21. Why won't this update install?

I had a similar problem: The "Thunderbolt display firmware update 1.2" kept reappearing in AppStore, even though the uppdate seemed successful.
According to Apple[1] the update was successful when the the Firmware Version is 26.2 and the Port Micro Firmware Version is 2.0.7 (visible in About this Mac -> SystemReport).
Above versions were correct in my case, but the update still kept appering in AppStore... (probably I did download and install the update manually after the first failure, but I don't remember ...)
To get rid of the annoying update in AppStore I used the softwareupdate command[2] on the commandline:
softwareupdate --ignore TBdisplayFWUpdate1.2
[1]: https://support.apple.com/en-us/HT204450
[2]: https://developer.apple.com/library/mac/documentation/Darwin/Reference/ManPages/ man8/softwareupdate.8.html

Thunderbolt firmware update 1.2 won't install

I can't find a way to get Thunderbolt firmware update 1.2 installed. I need this update because my external display won't work without it. Machine is late 2011 13" Macbook Pro running OS X 10.9.5. Other updates install without problems, only this update is keeping coming back. Installation seems to go fine, however it doesn't actually install it and update re-appears to App store.
Stuff I've tried already
Install update on AC & fully charged battery
Download & install update manually from Apple website
Install update with & without thunderbolt connected
...with these combinations, App store update log shows 8 installs for that update (and it's still not actually installed)
Anyone had similar problems? Any ideas how to get it installed?

Restart the computer in safe mode. Certain caches maintained by the system will be rebuilt.
Safe mode is much slower to start up than normal. The next normal startup may also be somewhat slow.
When the login screen appears, restart as usual (not in safe mode) and test. There's no need to log in while in safe mode.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t start in safe mode. In that case, ask for instructions.

EFI Firmware Update 1.2. won't install

I can't find exactly my problem but some threads are close. I keep getting software updates for EFI Firmware Update 1.2.
I shut down, then startup holding on-button until it flashes, release, buzz buzz, chime, then very briefly the apple logo and status bar, then gone, buzz buzz, chime and restart. After everything loads, there is the update window with install instructions, telling me to repeat if I see them, to no avail (tried several times over several weeks). My HD appears to be correctly partitioned, with this boot ROM: IM51.0090.B03 which would seem to indicate the update has not happened. I have unplugged all my peripherals (printer, zip drive) but not DSL modem.
any ideas?
thanks in advance
craig

I would delete the firmware updater that is in your Utilities folder and check your account settings(System Preferences/Accounts/Login Items) to see if it has been added to your login items. If so then remove. Re-run your software update and see if the Firmware update shows up again. If so then download and try again. According to Apple your BootROM should be IM51.0090.B09 after the update.
http://www.apple.com/support/downloads/imacefifirmwareupdate12.html

TS3499 MacBook SMC Firmware Update 1.4 won't install

Just received my new Magsafe 60w Power Adaptor from the apple store today, however although it is powering my MacBook, it is not charging it.
I bought my MacBook in early 2008 and it is version 10.5.8, it has an intel core 2 duo processor, and leapord OSX, so I looked for solutions and followed this guide on the apple support site [URL="http://support.apple.com/kb/TS3499"]http://support.apple.com/kb/TS3499[/URL].
I dowloaded the firmware update [URL="http://support.apple.com/kb/DL1312"]http://support.apple.com/kb/DL1312[/URL] accordingly but when I try to install it, it says " Alert: This computer does not need this update"
I looked at other solutions, and tried removing the battery and holding down the power button for 5 secs, I've checked that my Mac intel dual core is using the GUID disk partition which it is.
So I am pretty much lost with what to do, has anyone else had this problem and managed to resolve it?
Thanks Anyone

If you have a MacBook with the removable battery you can get a new third party battery fairly cheap on eBay. Every MacBook from 2006 through Mid 2009 except the Late 2008 Aluminum Unibody use the same battery.
Black Batteries http://shop.ebay.com/i.html?_nkw=macbook+black+battery&_sacat=0&LH_BIN=1&_sop=12 &_dmpt=Laptop_Batteries&_odkw=macbook+white+battery&_osacat=0&_trksid=p3286.c0. m 270.l1313
White Batteries http://shop.ebay.com/i.html?_nkw=macbook+white+battery&_sacat=0&LH_BIN=1&_sop=12 &_dmpt=Laptop_Batteries&_odkw=macbook+black+battery&_osacat=0&_trksid=p3286.c0. m 270.l1313
Or for $129 from The Apple Store http://store.apple.com/us/product/MA566LL/A?mco=MTY3ODQ5OTY

MacBook Air SMC Update v1.8 - Won't install

Software update says to install, but it won't install even when I click the checkbox to install it (in Software Update). I install, then run S/W Update again and the darn thing is still in there saying it needs to be installed. I have tried several times to install, even tried downloading it directly from Apple website and installing from there - still shows up in S/W Update as needing to be installed. Maybe it is installed and there's some bug in the S/W Update App that won't "release" it from S/W Update's tracking of versions? What gives? Now there is a firmware update 1.9 - can I install 1.9 if 1.8 won't install?
MacBook Air 13" (late 2010)/OS 10.6.8 (and no, don't tell me to upgrade OS - not gonna do it - finally got a stable system - other than this - and am not gonna wreck it)
Any advice GREATLY appreciated, since I am now experiencing some funkiness with the battery charging/magsafe adapter (sometimes won't charge even though battery is below 60% charge) and am hoping this firmware update might fix that.

No more than a minute. It is a two step process. Run the installer, reboot, watch a progress bar and finished. If you are still in the run the installer stage it should be safe to perform a force quit (hold power button for 10 seconds). If it is in the middle of the reboot you may need to visit an Apple store.

I am running Acrobat X Pro on Windows 7 in Parallels. I have tried to install the Acrobat updates, but they won't install. Today I tried to create a pdf from a Word 2013 document and it crapped out. I tried to uninstall Acrobat and got Error 1310. Error w

I am running Acrobat X Pro on Windows 7 in Parallels. I have tried to install the Acrobat updates, but they won't install. Today I tried to create a pdf from a Word 2013 document and it crapped out. I tried to uninstall Acrobat and got Error 1310. Error writing to file: c:\Config.Msi\feea.rbf. What do I do?

Hi Beverly ,
Please refer to the following and see if this helps.
https://helpx.adobe.com/creative-suite/kb/error-1310-error-writing-file.html
Regards
Sukrit Dhingra

MacBook Pro EFI Firmware Update 2.0 will not install.

Hi
The latest MacBook Pro EFI Firmware Update 2.0 will not install.
It runs and I restart my Mac but when I search for more updates it appears as a required update again.
Anyone know why this may be?

I had the same problem today. I called Apple support who transferred me to second level support and no resolution. I decided to try a combination of the items I have seen below.
I restarted my computer. I went to apple support download and downloaded the software EFI firmware update 2.0 by typing in search window. I made sure the power cord was pulled into the wall and the laptop had a FULL charge. I installed the update and the computer restarted.
I went to check the software update window after the update and restart completed and SUCCESSFUL.
I do not know why the Genius Bar or the second level support could not resolve my issues but, by me reading information here I hope at least this issue is resolved.
Thanks ALL.......... Happy Mac ing

Latest Revel IOS update crashes and won't install

I have been using Revel v 2.3.1-548 on iPhone 5 and iPad 3 without any issues. An update was released today (29 June) and this won't install and crashes the app on both devices so I have had to go back to the old version. Anyone else having this problem?
Steve

Does not work in Norway!
Med vennlig hilsen
Sincerely Yours,
Knut E. Fagerholm
[email protected]
+47 928 86 407
Sendt from my iPad.
Den 1. juli 2014 kl. 19:40 skrev dkbrillhart <[email protected]>:
Latest Revel IOS update crashes and won't install
created by dkbrillhart in Revel - View the full discussion
Thanks. That worked to restore the previous version from iTunes backup.
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6513742#6513742
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Revel by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

HT5934 My phone downloaded the update but it won't install it, it keep saying I'm no longer connected to the Internet and I am I'm under wifi at home what should I do?

My phone downloaded the update but it won't install it, it keep saying I'm no longer connected to the Internet and I am I'm under wifi at home what should I do?

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(100170)

Using adobe updater i can download PS6 update but it won't install.

Using adobe updater i can download PS6 update but it won't install.

I have just had a good chat with an Adobe live chat person. He has explained to me why I am getting the U44M1P7 error.
I have a perpetual version of CS6 that I bought earlier in the year. The creative cloud update only applies to versions of CS6 that have been downloaded via creative cloud. The error means I am trying to update a version of CS6 (my perpetual copy) that has aleady been updated.
I have version 13.0.4 and the update is 13.1.2. If I want the update I have to uninstall CS6 from my computer (my perpetual version) and download CS6 from creative cloud. Then I will be able to have the updates.
Hope this helps you. I haven't ried it yet but will post my results when I do.

Late 2009 Mac Mini EFI 2.1 Firmware update not needed/already factory installed?

Here has been my issue of trying to figure out if Mac Mini can handle (and fully use) 8GB of RAM with my current EFI version.
I want to upgrade to 8GB on a LATE 2009 Mac Mini that currently has Boot ROM MM31.00AD.B00 and was told to update with EFI Firmware update 2.1 but it does not install saying "This update is not needed on this machine".
I found various contradicting posts saying that I need my Boot ROM to be MM31.0081.B06 or my machine won't utilize the 8GB fully
and will slow down in performance and/or crash after the Apple recommended 4GB.
But here's what I found interesting. Some users have mentioned that the Late 2009 Mac Mini's shipped with updated firmware and don't need this update but could not find a concrete answer as to yes it did ship with it or not.
Apple doesn't even list a Late 2009 Mac Mini as needing a Firmware update in this list of Firmware updates: http://support.apple.com/kb/HT1237 . Should I just assume that my machine shipped with said update and is capeable of the 8GB? I use this for Logic Pro 9 as a somewhat portable workstation that I can take with me so maxing out the RAM would be ideal for me.
Any help or clarification would be greatly apprishiated,
Nelson

Actually a Late 2009 can take 8GB of RAM and only the Early 2009 needs the EFI update.
see > Apple Mac mini Memory DDR3 / Ram upgrades for 2009 Mac mini & 2010 Mac mini unibody models
If you have any dough's, contact the OWC tech specialist
at > OWC Tech Center: Online Guides & Videos, FAQ, Manufacturer Links, Product Manuals, and more

Thundrbolt firmware update 1.2 will not install using yosemite on macbook pro retina

Cannot install thunderbolt firmware update 1.2 on macbook 13 in retina running yosemite. Have tried disconnection all peripherals. No success.

Probably your Thunderbolt display is already up-to date. To check this, follow these steps:
Choose About This Mac from the Apple () menu.
Click More Info and then click System Report.
Click Thunderbolt in the list on the left and locate the Thunderbolt Display section. If the Firmware Version is 26.2 and the Port Micro Firmware Version is 2.0.7, you won't need this update.
I bought my ATD one year ago, and according to Apple it is "up-to date"... But I still have serious problems with it (follow this thread).

EFI Update 2.0 won't install

Every time I try to install the 2.0 EFI update the machine restarts, beeps, bongs, shows the firmware update screen briefly, restarts and bongs again, then goes into a cycle of doing this a couple more times before eventually giving up and booting. The update isn't installed. I've tried this probably about ten times now without any joy.
Nearly new 13" MacBook Air, basic 1.86GHz/2GB/128GB spec. Next to nothing installed software wise, didn't migrate from any other Macs.

Does Software Update indicate that you need to install the EFI Update? The EFI Update was already installed on the MacBook Air that I received yesterday. In addition, Snow Leopard 10.6.5 was on the USB Stick that came with the computer, not 10.6.4.

Firmware Update 1.5 won't install?

Similar Messages

Maybe you are looking for