Firmware update failed hdd not recognizing now

my 1tb mypassport was working perfectly fine untill i tried to upgrade firmware. it failed and now hdd is nor being recognized. no ticking sound. lifht turns on windows vive usb conection sound but nothing appears no error or driveplz help me.i have very iortanr data on itthanks

The drive is probably bricked. I only do the firmware updates if there is a problem with the drive or a security issue. Sometimes if it ain't broke don't fix it is the best policy!Joe

Similar Messages

  • SMC-firmware update 1.4 not recognized

    Recently I downloaded the SMC-firmware update 1.4 because my new L-shaped MagSafe power adapter was not working with my computer. For a day or so, I was relieved because the update appeared to fix the charger, but then it stopped working altogether again. After trying multiple methods to fix this (unplugging the adapter, trying different outlets, resetting the SMC, etc.), I discovered that my computer was still running SMC version 1.27f3. I've tried downloading the update manually, but every time it says that my computer doesn't need it. Any advice on how I can actually update the SMC?

    It turns out my adapter was actually broken. I went to the Apple store and they replaced it with a new one. The guy at the Genius Bar said the SMC update was only for MacBooks and that the L-shaped adapters should work with MacBook Pros.

  • Zen Micro - firmware update failed so now "dead"

    I have a firmware problem with my Zen Micro. Can anyone help?
    The series of actions I have taken so far are these:
    I got my Micro in January 2006. I now want to run Audible software to listen to their books so I downloaded the firmware update L6_2_2_02.exe from the Creative support site which is stated as providing the Audible?facility.
    I backed up the Micro contents using Creative MeadiaSource Organiser. I then ran the firmware update from my Win XP PC. This started OK and I got a series of messages about what was happening. Then it stopped with the progress indicator bars about 2/3 across. I left it for half an hour and nothing changed so clicked to stop the update.
    I checked the firmware version on the Micro and it said 2.2.02. The update?looked OK and the FM worked but of course I had no music content.
    I opened my Creative MeadiaSource Organiser (v 3.0.09) but it said no device is connected so I was unable to reload the music. My XP PC recognised the Micro as connected and I checked Device Manager which showed the "device is working properly". I was also able to synch music to the Micro using Windows Media Player and this played OK. I tried another computer and could also synch using Windows Media Player but I wanted to reload my music from the backup.
    I looked on the Creative site for the steps to take when a firmware update fails. The Zen Micro is not on the list as supporting the MP3 Player Recovery Tool so I did not use that. I followed the Reload Failure recovery instructions and ran Clean UP, then Format All, but this did not fix it so I ran Reload Firmware on the Micro. This was a big mistake!
    Now when I try to run the firmware update from my Win XP PC, I select English then I get the message "Your player is not connected, please connect your player". I checked again and XP still recognises the Micro and the device is working. It is no longer recognised by Windows Media Player but just? appears to XP as an empty storage device.
    The Micro now shows the firmware as v 0.0.65, but now it is stuck in Recovery Mode. I have contacted Creative Support but their reply is that this player is now over 3 years old, reached its end of service life, so there is no support other than on their web site. Following their web site recovery instructions got me into this mess so I guess?no extra help is offered from Creative.
    The player is now essentially dead. Unless there is some way to get the firmware update program to recognise the device as connected, then I don't know how to fix this. This is a shame as it is a nice little player for my music collection.
    Can anyone help as I don't know what to do next?

    I have the same problem. I put the screenshots below and the errors that happen to me.I can not put him the firmware because I do not recognize the device.
    Both windows xp windows 7 as the
    DISPOSITIVO, IMAGEN ACTUAL
    http://img528.imageshack.us/img528/3783/dsc0025mv.jpg
    EL PORTATIL LO RECONOCE
    http://img811.imageshack.us/img811/4323/dsc0026ox.jpg
    MUESTRA BATERIA, PULSANDO BOTON DERECHO
    http://img546.imageshack.us/img546/4855/dsc0027wj.jpg
    ADMINISTRADOR DE DISPOSITIVOS
    http://img801.imageshack.us/img801/4501/dsc0028une.jpg
    ERROR AL INSTALAR CREATIVE SOURCE
    http://img805.imageshack.us/img805/3061/dsc0029io.jpg
    http://img208.imageshack.us/img208/9330/dsc0031sn.jpg
    http://img545.imageshack.us/img545/7096/dsc0032qg.jpg
    MP3 PLAYER RECOVERY TOOL, no me reconoce Creative ZEN MICRO como conectado
    http://img528.imageshack.us/img528/1714/dsc0030qn.jpg
    PROGRAMAS DESCARGADOS (pagina oficial creative)
    http://img341.imageshack.us/img341/2466/dsc0033oi.jpg
    DSC_0025.jpg
    I need your help. I'm desperate. Uninstall Windows Media Player.
    Thanks in advance

  • HT201210 Itunes update failed to install and now Itunes  won't run

    Itunes update failed to install and now Itunes  won't run

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features(Later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    See also HT1925: Removing and Reinstalling iTunes for Windows XP or HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    Should you get the error iTunes.exe - Entry Point Not Found after the above reinstall then copy QTMovieWin.dll from:
    C:\Program Files (x86)\Common Files\Apple\Apple Application Support
    and paste into:
    C:\Program Files (x86)\iTunes
    The above paths would be for a 64-bit machine. Hopefully the same fix with the " (x86)" omitted would work on 32-bit systems with the same error.
    tt2

  • 'MacBook Pro EFI Firmware Update (v2.3)' not installing

      'MacBook Pro EFI Firmware Update (v2.3)' not installing
            I've tried multiple times now to install this update. When I do, it downloads and my computer will restart around 5 times with the 'beep' the first time. Once its finished the restarts and resumes normally, I check the Software Update via the Apple menu and it still appears in the list of updates.
    What's the cause of this and what can I do to resolve this?

    Is your machine plugged in when you do this?  The firmware update will not take place unless your system is plugged in.  You'll just get a black screen that flashes a few times and it will eventually boot regularly back to what it was.  If the firmware is installing, you'll see a progress bar at the bottom of your display.

  • Firmware update failed - how to resolve remotely

    I bought my father an Apple TV so he could subscribe and watch MLB. Everything was working fine until the Apple TV attempted to update itself. Apparently the firmware update failed.  I need to know how to remotely resolve this for him. I can access his PC remotely so I read some info that you can update Apple TV via iTunes. I also need to confirm that the USB socket on the Apple TV is a USB Mini type. I'm assuming you can just plug the Apple TV into a USB socket and then from iTunes initiate the firmware update, much like you do an iPad. He's not very technically savvy, so I need to do this for him or have him call Apple support.
    Any suggestions or help is appreciated. 

    If he hasn't done so get him to do the old fashioned trick of unplugging teh mains power to it and restarting.
    If it restarts correctly the update can be reattempted.
    If it's truly bricked then return to Apple or restore using itunes will be necessary.

  • I have an ipad2 and we purchased an HP office jet 6600.  I can not connect to print.  In searching the net, I have been advised to get the firmware update but can not find it.  Can you advise?

    I have an ipad2 and we purchased an HP office jet 6600.  I can not connect to print.  In searching the net, I have been advised to get the firmware update but can not find it.  Can you advise?

    Is the HP on the airprint list?
    iOS AirPrint Printers  http://support.apple.com/kb/HT4356
    How to Print from Your iPad: Summary of Printer and Printing Options
    http://ipadacademy.com/2012/03/how-to-print-from-your-ipad-summary-of-printer-an d-printing-options
    Print from iPad / iPhone without AirPrint
    http://ipadhelp.com/ipad-help/print-from-ipad-iphone-without-airprint/
    How to Enable AirPrint on a Mac and Use Any Printer
    http://ipadhelp.com/ipad-help/how-to-use-airprint-with-any-printer/
     Cheers, Tom

  • 1.5tb HDD not recognized by computer

    1.5tb HDD not recognized by my computer after months of use..! Half filled with very important data. what can I do?

    Try the suggestions in this article.
    How To: Fix USB Problems in Windows 8, Windows 7, and Windows Vista
    - Peter

  • Mac Pro EFI Firmware Update 1.1 Not installing after restart

    I've been trying to get this Firmware update installed for a month now, but every time I restart it just comes back to the screen with instructions. I've tried holding the power button down until after it blinks, until the beep, while it's blinking, after the beep- and nothing seems to work so I just hit cancel and give up on the update. I've seen others have had this problem but responses say just to hold it down for 5 seconds, but that doesn't work. Are there any other solutions?

    One solution might be that the firmware update is for a MacPro and you show having a G5.

  • Bios update failed : does not meet system requirements code 9994/9996

    bios update failed : does not meet system requirements code 9994/9996 / Model ny801av-aba HP Pavilion p6100z cto Desktop  windows vista basic  current bios version 5.38, released 03/20/09. 4GB ram (3.5 useable) AMD semperon LE- 1300 socket am2+  code name sparta.  M2N68-LA Motherboard BIOS update verision 5.49 released 08/24/09      (am trying to upgrade to a AMD phenom triple core 8400 2.1 gig that is why I am trying to update the bios, when I put it in I got nothing.)
    This question was solved.
    View Solution.

    Figure 1: Error message
    The error displays when ...
    the update requires certain hardware or software that is not installed on your computer (examples: keyboard replaced with a non-HP keyboard or Microsoft .NET software is not installed),
    the computer does not meet a certain minimum hardware or software requirement (examples: 4 GB minimum memory, 200 MB free disk space, or .NET version 2.0 required and 1.0 is installed) .
    Usually, this error indicates the update is not needed for your computer and it should not be installed.

  • Zen Micro needs firmware update for Vista, but what now as it fail

    As I now use Vista (paid for by my work) I came to install my Zen Micro which wasn't recognised so I came to the website and discovered that you need version 2 of the firmware for it to be compatible with Vista. Having never had the need to upgrade before I was still on Version one so I downloaded it onto my other WinXP machine?which I've used my Zen on alot before to do the upgrade. Started the upgrade and all seemed to be well until a point a 3rd of the way through a box came up asking what I'd like to do with the device (like the one when a USB key inserted). Leaving the upgrade I returned hour later to see nothing has changed and the upgrade has failed.
    I've tried all the options with recovery mode but it still just shows up as having version 0.0.65 and when inserted into a PC shows up as a?Creative Zen Micro?in device manage and has a 20MB disk partition for storage but when I try and run a firmware patch it says its not connected.
    Looking round this forum this seems to be quite common upto now but with the release of Vista people are forced to take the 'risk' of running a firmware update that when it fails doesn't seem to be recoverable even in recovery mode. Please can you look into updating the firmware to find these devices that it can't see, for many years I've laughed at my friends with their crashing ipods that need charging everyday due to not being able to change the battery but it now seems the jokes on me.

    I used Adambonello's fix and it worked?http://forums.creative.com/creativel...mp=true#M80097

  • Attempted Iphone 4 update to latest firmware update "failed"

    Ive attempted to update the Iphone to the latest firmware update  and it has failed 3 times, the final time it looked as though
    it worked but stopped and went into new mode to go-back to Restore to old  setting. Now it is locked up and asking me for the  admin backup password
    and everything I've tried is not working..  Not sure what to do at this point.
    The laptop I'm using is a Panasonic CF29 and running Windows XP with SP3 installed.
    I'm  open to any ideas at this point.
                Thanks Artman

    Then it's pretty hopeless. Normally the error message remains displayed until you click "OK", so it's surprising that you didn't see it. You can try the shotgun approach; just try a bunch of stuff in the hopes that it will work. But first I suggest trying to update it again, and this time watch it. The following list covers the most common causes of update failures:
    Open a Command window and type the command "netsh   winsock   reset"
    Reboot your computer
    Disable your antivirus and firewall
    Launch iTunes
    Connect the phone using a USB port directly on the computer, not a hub
    When the phone is recognized in iTunes click on it, then click Restore
    If the phone is NOT recognized in iTunes, disconnect it, the hold the HOME and SLEEP buttons for exactly 10 seconds until the screen goes black, then release SLEEP but continue holding HOME while you connect the cable and continue holding HOME until iTunes recognizes a phone in recovery mode
    If the update completes you are in business
    You mentioned being prompted for a backup password. If your backup is encrypted you will need to know the password to complete the restore; if you don't know it you will have to restore as New and manually add your content back. If it is encrypted you really did enter a password for it once, whether you remember doing so or not.

  • Ios4 update failed on 3gs and now phone dont work at all

    so i updated as per apple instructions and update failed no code given and my iphone 3gs is now dead as in blank wiped clean but a black screen with white apple cant even pwer off and not recognized as connected to computer to restore or try updating again. this is my only phone so apple cant call me back for support
    anyone else had this happen and fixed it?

    Ok this is wat happened to my iPhone 3GS after I opted to upgrade to iOS4.0:
    After the upgrade file finished downloading, the installation process got initiated. However, after a few minutes, the process crashed throwing up an Error 1602. My phone just displayed the connect to itunes logo. I did a hard reset (by pushing the home button & the power on/off button simultaneously) and the phone entered the recovery mode (or DFU or watever it is called). I reopened itunes and connected the iphone again. This time, I was told that the phone has been detected on recovery mode. I clicked RESTORE & it told me that the phone would be restored to factory settings,which I chose. The recovery process started and after a coupla minutes, I got another error. This time it was Error 1601.
    After spending a good 2 hrs researching the internet, I found the solution that did work for me. Here goes...U would need another computer for this (not the one u have been using to sync ur iphone with):
    1) Install itunes 9.2 on another computer.
    2) Connect ur iphone (while it displays the connect to itunes logo).
    3) itunes will detect an iphone on recovery mode.
    4) Click Restore. itunes will tell u that ur phone can be restored to factory settings. Choose OK.
    5) itunes will automatically download iOS 4.0
    6) once the download is complete, installation of iOS 4 should start immediately. if for some weird reason it doesnt initiate, press shift+restore and select the installation file (it is located in C:\Documenst & Settings\User\Application Data\Apple Computer\itunes\iphone software updates\xxxxx.ipsw )
    7) Once u've selected this file, installation will start & ull get a progress bar on ur iphone as well.
    8) The installation should come around fine & after a coupla automatic reboots, ur iPhone should now be up & running with iOS 4.0
    9) Itunes will ask you to name ur iphone. at this point, eject the iphone from the computer & connect it to the other computer (the one which u previously used to sync the iphone with). open itunes & ull get 2 options: Create a new iphone or restore backup from "Sandy's iPhone" ur iphone's name. Choose the 2nd option & watch ur iphone being restored with all ur backup.\
    10) once the sync is complete, eject & enjoy iOS 4
    Phew
    Cheers!!!

  • HELP! Firmware update failed, need to extract data from unreadable iPod

    Please HELP! I have important data on my iPod that I need to preserve. Here's what I did:
    * downloaded newest iPod software and used the iPod Updater. It assured me the the "Update" process does not touch songs/data on my iPod
    * clicked the Update button. The update failed, citing error writting data to disk.
    * now my iPod will not boot up (folder icon), on top of that it will not mount even in Disk Mode (claims it's unformatted).
    * iPod Updater now offers only the Restore option
    I absolutelly NEED to get the data of my iPod if I am to restore it. The data should still be on the disk (even if the firmware is damadged), it's just a matter of gaining access to it.
    Any chances?
    iPod video Windows XP

    Good luck.
    Sounds like a problem I had with a camera card - and I lost the pictures, and I have yet to restore the camera card - it's still dead, won't even format.
    Take it someplace where they specialize in data recovery - for high fees....

  • Did a firmware update 2/29/12 and now my second monitor stopped working, turns on and is detected but goes black

    I did a recommended mac os update on 2/29/12.  It also performed a firmware update.  When I restarted my external second monitor came on and then went black.  The monitor is detected and if I change it's size it comes on couple of seconds and goes black again.  Any idea what might be the problem? No problems experiecned before update.
    Model Name:          iMac
      Model Identifier:          iMac12,1
      Processor Name:          Intel Core i5
      Processor Speed:          2.7 GHz
      Number of Processors:          1
      Total Number of Cores:          4
      L2 Cache (per Core):          256 KB
      L3 Cache:          6 MB
      Memory:          4 GB
      Boot ROM Version:          IM121.0047.B1F
      SMC Version (system):          1.71f22
      Serial Number (system):          C0*******HJN
      Hardware UUID:          1CF60534-6DD0-582B-9A78-A789EFD824C2
    <Serial Number Edited By Host>

    Well THANKS Matt_G..... I opened in safe mode and all my previously opened tabs, from when it last worked, displayed properly. I then started Aurora normally and it failed again so took your advice about disabling Add-ons and now all is working properly again. Not sure which Add-on it was because I disabled almost a of them since they really did nothing for me. I might go back tomorrow and try to find the one that did me in. Think that when you update Aurora it checks for new versions of Add-ons and that could also have gotten me.
    Thanks again,
    Rodger

Maybe you are looking for

  • Can no longer print directly from html nor to a pdf. Mac OX 10.7.4

    For several weeks now whenever I try to print a document directly from Internet (html) the printer preview window doesn't show the document. I only get a black screen. I tried printing anyway thinking that there could be a problem with the preview se

  • Python development environments??

    While trying to build the poker-network pkgbuild from AUR I'm having an issue with the error configure: error: No python development environments found. I have all LISTED dependencies installed.  Have searched a bit for this and am having no luck at

  • Any hope for Spaces working in PSE 8.0?

    I just discovered the power of using Spaces in OS X 10.6.2, and was disappointed to find that PSE 8 is the only program I regularly use that doesn't support this feature. Any hope for this bug being fixed in future updates?

  • Does Pages make errors in translation?

    I've heard that pages is supposed to translate Word documents flawlessly in many cases, but in my years of using computers, I find that quite often when a document is translated from one proprietary format into another, it may look fine, but it will

  • [CS3 / VBS]  Search in CS3

    I have another old script I'm updating for CS3. This one uses the "Search" function and CS3 doesn't like it, what would be my best option to replace this line with since I'm not having very good luck with it? If TextFrame.Tables.Item(1).Cells.Item(Ce