FIRMWARE UPDATE FAILURE. DISKWRITE ERROR

WHAT IS THIS ERROR I CAN'T EVEN RESTORE MY IPS HELP ME

I got the same error. Every time I reinstalled the updater it would say it is up to date but itunes would not recognize so I would go back to restore and got the error you are experiencing. I couldn't even save a file to the ipod without getting errors. Once I got the ipod to recognize I would get disk write errors. The only thing that helped me was an older version of the updater. I am running a version from 6/05 and not 9/05 with itunes 5.01. It appears to like this older version and recognizes my ipod and lets me write a file directly to the ipod. So, if you can find an older version, install it on another pc if you can this may help you. I had to restore my ipod in a different pc then I use itunes. Makes no sense but this is my 3rd shuffle and I'm finally getting it to work. The first one worked fine just the batter stopped charging, the replacement from Apple had problems with the usb and wouldn't recognize in any pc even an Apple and this third one is problematic but at least I can get it to work. Beware those who want to buy a shuffle. Rethink your decision. I'm sure there are better products out there if you do a little research. Seem to find many disappointed shuffle users.

Similar Messages

FOUND SOLUTION TO: "Firmware Update Failure.Diskwrite Error"

I have found a solution to the:
"FIRMWARE UPDATE FAILURE. DISKWRITE ERROR."
Last night i re-encoded my mp3's to 128kbs, and then plugged my iPod Shuffle in, and it went crazy... i tried restoring and it kept giving me the error above!
Anyways, here's a solution (that may require to be tried a couple of times)...
If you keep getting this error, go to My Computer, then right click the iPod (maybe called "Removable Storage").
Go to Format... and make sure its set at FAT32. Also make sure that "Quick Format" is unticked.
Once this is done. Eject it. Plug it into another USB slot, and go to iPod Updater and restore. It should work.
And then rename the ipod thru iTunes, and upload ur music on to it!
Enjoy and Good luck!

So are there any risks involved in formatting with windows?
I just tried doing this and it won't format (I select the option but there is no response)

Does anyone know how to solve: "Firmware update failure. Disk write error"?

Hi all,
Here is the list of all what went wrong and where I am now:
1. My Ipod worked well
2. I wanted to update it, you know, the normal thing with Itunes
3. Every time I tried, my computer froze. I was unable to add only one song (both automatically and manually).
4. I took my external drive (where my music is) at work and tried again: same result.
5. I decided to run the Updater I have on the CD that came with the Ipod.(2005-02-07; I usually avoid the newer version, having had once a problem when putting a newer version of Updater).
6. The Updater was unable to operate any action on my Ipode (I don't remember the messages now).
7. Like I tried what I describe here above like a hundred time. I decided to format the Ipod with Windows (My Computer, right click on the Ipod, format).
8. It did and now I have only the famous folder with an exclamation mark on my Ipod.
9. Now when I am running the Updater, it says it cannot Restore the factory settings giving this message "Firmware update failure. Disk write error".
I would appreciate any help because, during the last 2 hours, I read and tried all I found on the Support Help here on the Apple web side without any result yet.
Thank a lot for your answer

Hi Cyrille,
Have you looked at Knowledge Base Document #301267 on "Disk cannot be read from or written to" when syncing iPod or "Firmware update failure" error when updating or restoring iPod?
Jon
Mac Mini 1.42Ghz, iPod (All), Airport (Graphite & Express), G4 1.33Ghz iBook, G4 iMac 1Ghz, G3 500Mhz, iBook iMac 233Mhz, eMate, Power Mac 5400 LC, PowerBook 540c, Macintosh 128K, Apple //e, Apple //, and some more... Mac OS X (10.4.5) Moto Razr, iLife '06, SmartDisk 160Gb, Apple BT Mouse, Sight..

"firmware update failure. disk write error."

i get this when i use the ipod Updater after clicking "restore"... this thing is giving me a headache. Also get the previous mentioned "cannot read from or write to disk" error when using itunes after a couple downloads. i followed the steps in the link to those issues and ran some updates on my PC and still the same. HELP

Have you read both
For Firmware update failure. Disk write error please see
http://docs.info.apple.com/article.html?artnum=301267
http://docs.info.apple.com/article.html?artnum=300836

Restore fails with "Firmware update failure. Disk write Error" message

I am going totally bonkers with this one. My Shuffle stopped working suddenly.
My iTunes was not able to read the contents of the iPOD and there seems to be a corrupt filesystem. After reviewing various posts, I have tried the following with little success:
1. Tried Restore using the Updater tool that came with the Shuffle (2005-09-23). I kept getting the "Firmware update failure. Disk write Error"
2. Downloaded the new updater tool (2006-03-23) and tried restore again. I got the same error message again.
3. Tried formatting using Windows format, it is not able to complete the format
4. Tried chkdsk. Get an error message saying "CHKDSK is not available for RAW drives."
5. Tried connecting it to a different computer and tried pretty much the same steps. Similar results.
I am using USB 2.0 both on my current Thinkpad as well as the other computer I tried with.
I am totally clueless and am not sure how to go about fixing this one. Though there have been lots of posts about this, I haven't been able to find a solution that works for me. Any thing else that I may have missed out which I can try?
Thanks,
Kris
Thinkpad Windows XP Pro

hiya!
just checking. have you worked through the possibilities from this document yet?
"Disk cannot be read from or written to" when syncing iPod or "Firmware update failure" error when updating or restoring iPod
given that you're connecting to a laptop, we'd better check on this possibility too:
iPod not recognized when connected to Windows laptop over USB
... and even though you aren't using a Toshiba, this technique might be worth a try (if all else fails):
iPod not recognized correctly on Toshiba laptop
love, b

"Firmware Update Failure", please help

Okay so my brand new 20GB iPod photo refuses to have the systems software loaded onto it, everytime I try and use the iPod Updater (yes I have the newest version) it says: "Firmware Update Failure. Disk write error." I've got it connected with USB 2.0, it shows up as a removable storage device in my computer but doesn't show up at all in iTunes.
So if any of you know what's going on please give me a hand.

JamesBond said:
That means that USB2 port is not compatible with the iPod?
I don't think so. More along the lines that the iPod is not USB 2.0 compliant, or properly certified, or it has a bug somewhere.
Basicly if a device is USB 2.0 compliant, it will work with a USB 1.1 port, just very slowly.
from www.usb.org, if a "device" has passed the certification and has earned the proper "High Speed USB" logo http://www.usb.org/developers/compliance/logo/usbhs125.gif it also HAS to work with a USB 1.0 port otherwise it won't earn the logo.
Now, this begs the question... has the iPod passed it's tests and earned it's High Speed USB certification logo? I can't find any of Apples products that have the logo, can someone point me to them?
Apple is a memeber of the USB Implementers Forum, Inc (and only has one person that is a member).
You can find some good information about USB at www.usb.org. Specificly that it is no longer refered to as USB 2.0, but as "High Speed USB" (just semantics)

Getting "Firmware Update Failure" when restoring

My ipod mini kept giving me the folder and exclamation point icon and resetting didn't work to make it stop. I tried a few times to restore, but it keeps giving me the message "Firmware Update Failure. Disk Write Error" whenever I try to restore. Now what do I do? My ipod still just gives me the folder icon.

A couple of tricks to try:
1) Plug in whatever was last connected (charger, peripheral) and then try rebooting. Sometimes it just wants to see the last config
2) Try mounting on PC as USB drive (may take multiple tries). If successful, then REFORMAT just like an external HD.
At that point, you can "start over" with iPod update.

Firmware Update Failure? Extreme help needed

I was trying to update my ipod but when i tried to restore it, it suddenly stopped, then it said firmware update failure. No my ipod is screwed up again. This is the second time. The first time i sent it away and they gave me a new one, i followed the directions they gave on updating and restoring to windows settings, but now my ipod shows the apple, then the exclamation mark folder with a website below that. i need help cuz i don't want to send it away again.

ok i think i may have just fixed it, and for all of you who may run into this problem. I just tried restoring it on my friends computer, and i think i fixed the problem.

"Software Update Failure - an error occurred installing i0S6."

I tried to update my iphone 4 through my settings and got the error "Software Update Failure - an error occurred installing i0S6." This is not the first time that happens. I got the same error in the last 3 ios updates. The only way that I found to solve was to update by itunes, but as we have the option to update through iphone, I want to do that.
Any suggestions on how to solve this problem will be most appreciated.

In the last 3 ios updates I had to use itunes because through the settings I always get the same error message. The point is that I don't want to use the itunes. I want apple to fix the problem (as I can see I'm not the only one having problem). I have 2 friends that did the update in the same time that I was trying to do, and for both them it worked.

Aluminum Keyboard firmware update FAILURE

I accepted the firmware update yesterday and was asked for my appleID password to confirm installation. After the firmware installation started (listed as "Aluminum Keyboard Firmware Update 1.0" in the title bar of the installation window, but 1.1 in the software update list), the keyboard just stopped working entirely (although the mouse connected to the USB slot was still functioning) and oddly, I was asked for my password to resume installation. Of course at this point, I had no functioning keyboard to enter the password!
I plugged in a spare MS keyboard to put in the password and continue the installation, which stalled due to some internet issues (still not sure if it's ISP or AirPort related). I woke up this morning to check and the update was still stuck installing. It wouldn't let me close the update without forcing, but I went ahead and stopped it and re-started the firmware update by checking for software updates again. The update asked me for my password THREE times and went through a loop of progress on what appeared to be the same installation screen. After the third time, I received a message that the firmware installation failed.
So now I've completed the firmware update (with an error) and managed to incapacitate my keyboard. Any idea what I can do to get my keyboard working again?
I'm aware of the possibility that the additional keyboard may be causing problems, but being prompted for a password three times during the firmware update necessitates it.

Welcome to the Apple Discussions!
At this point you may be better off taking the KB to an Apple Store and getting them to install the firmware.
To be honest, I would never do a firmware update with Software Update. As you see, things can go wrong, especially when you are relying on an internet connection. Whenever SU informs me of a firmware update I decline to install and then go to the Apple Downloads page, manually download the update and, following the instructions exactly, install the update manually.
Dah•veed

FirmWare updates always spawn error message

I work at a school, and I have been involved in imaging our new MacBooks and iMacs. Every time I run a FirmWare update, I get the strange error message asking "Where is system events?" and it asks me to browse for the application. Closing the dialog box allows the update to run and complete successfully.
Has anyone else encountered this? This isn't a big deal. I just hate it when companies half-@$$ things...

I'm not sure why you're getting the error, it might help if you told us exactly which model MacBook and which "firmware" update you're installing (there are several different ones). If it helps, System Events is in this path:
/System/Library/CoreServices/System Events.app
-Doug

Mac Pro SMC Firmware Update "An Unexpected Error Occurred (0)" HELP

Mac Pro SMC Firmware Update (Version 1.1) Size (970 KB)
"The SMC Firmware Update adjusts fan behavior in Mac Pro. The updater application will be installed in the /Applications/Utilities folder and will launch automatically. Please follow the instructions in the updater application to complete the process."
-----THIS IS WHAT HAPPEND TO ME----I try this morning to install and this is what I got:
" An unexpected error occurred (0).
Your firmware can not be Updated. "
"See www.apple.com/support for more information."

Are you booting from RAID? even though it warns that you can't be booting from RAID, some people still run the update.
Any problem with your system?
While it only says that you need to quit any and all open programs, sometimes it helps to reboot (and boot into Safe Mode) just to begin the process.
When there was an SMC Firmware update before (last fall) some people also had trouble.
We aren't mind readers, and to say it failed doesn't give those of us reading this (and non of us are Apple tech support) a lot to go on.
+Please follow the instructions in the updater application to complete the process.+
+To update the SMC firmware on your Mac Pro:+
+Your computer’s power cord must be connected and plugged into a working power source.+
+1. Quit all other open applications.+
+2. Click Restart in the Mac Pro SMC Firmware Update window and wait for your computer to restart.+
+The SMC firmware update starts automatically. A status bar indicates the progress of the update. During the update your computer fans will run at full speed, but will return to normal once the update completes.+
+Important: Do not interrupt the update.+
+Your computer restarts automatically when the update is completed and opens the Mac Pro SMC Firmware Update.+
+3. Click OK. The SMC firmware is now up-to-date.+
+If these instructions appear on your screen again, the SMC firmware update was not successful. Repeat steps 2 and 3.+
Note:
+This update requires a Macintosh formatted disk or partition. If you are starting up using a RAID (Redundant Array of Independent Disks) subsystem, you must attach a Macintosh formatted storage device to apply this update.+
*+Some USB and FireWire devices may prevent firmware updates from installing correctly.+*
*If you are having trouble installing an update try disconnecting non-essential devices and use only an Apple branded keyboard, mouse and monitor.+*
http://www.apple.com/support/downloads/macprosmcfirmwareupdate11.html

Mifi4510L Firmware Update Failures

I'm trying to update my MiFi unit and it repeatedly fails. It tells me this update is mandatory and the speed is like a 9600 baud modem. Is amyone else getting this error? Look at the weird date. See attachment.

See the MiFi 4510L firmware update instructions:
http://support.verizonwireless.com/clc/devices/knowledge_base.html?id=53839
2.28 is the most recent version. There is a thread with lots of helpful information here:
https://community.verizonwireless.com/thread/770671?tstart=0
Try running through the suggestions in that thread and see if you can get the problem resolved.

WINCE 7 WiFi settings update failure with error CMRE_INVALID_PARAMETER

Hello,
We are facing WiFi settings update failure in WinCE 7 application when calling
CmAddConnectionConfig
API, it returns error code CMRE_INVALID_PARAMETER. The API failuer occurs randomly at some point in time, after this failure, this API always return the same error code and further it is not possible to change
the Wifi Settings at all until reflasing the SOM.
The setup:
Windows Embedded compact 7 with rollups upto November 2014 (7.1.2846.0)
EDImax (EW-7722UTnV2) WiFi adapter
Variscite OM37 SOM
Thanks and regards,
Looking for a help to resolve this issue.
Thanks and regards,
Srinivasan Chandran

Hello,
We are facing WiFi settings update failure in WinCE 7 application when calling
CmAddConnectionConfig
API, it returns error code CMRE_INVALID_PARAMETER. The API failuer occurs randomly at some point in time, after this failure, this API always return the same error code and further it is not possible to change
the Wifi Settings at all until reflasing the SOM.
The setup:
Windows Embedded compact 7 with rollups upto November 2014 (7.1.2846.0)
EDImax (EW-7722UTnV2) WiFi adapter
Variscite OM37 SOM
Thanks and regards,
Looking for a help to resolve this issue.
Thanks and regards,
Srinivasan Chandran

Firmware Update Failure

Linksys Wireless - G
Model: WRT54GS v7
Firmware Version: v7.50.5
Hi, I recently upadted my firmware because of lag problems on my xbox 360. I read it was always best to update the firmware so i gave it a shot. So i installed the new firmware in a .bin format and tried extracting it, nothing seemed to work so I then just went straight to the 192.168.1.1 site and tried to upload the firmware in it's .bin format. It began to show the bars proccess and then after awhile it said "update failed" then I returned to the home page and everything was corrupt pretty much. some images wouldn't load and some links, when clicked would send me to a page with text such as this: "ª ’Ô ·SšÔ áFãA*vØYÀçµr|ßkøëì5|—è·’h¹œ¶c¾ IÕÊWt.×¾¢s¶þì2z¥¼Y„6ý àÿ Z4ú6GÌ]ÐòìU¨ÕÔÃª;_;£H¾nïZI=Â·“¾&&Áu¯ÏlËó ?éÇ+ú R –G°ËM r3¸4Ì/~I Lèe¾Øv ù 8žÌ¯ ÐEÊ ·‡ÅÀ' : tæÈS¥ñ GÀŸ$¿ x ƒŽ¬RïÒv"{b ÿŸ ?´ Å „Æ,¥9K°€À¥›lzm0šAª › lOS× æ î— 5ß ¬ö"
LELA won't detect my router now, which is perfectly connected and running. I can access the internet. I keep trying to connect to XBOX Live which is now failing at the MTU step. It seems after I installed the update for the new firmware everything went wrong. I tried restting to factory settings, but nothing. It did however reset my router password thankfully. I can't access the Wireless tap at all on the firmware, which is what i need to access sadly. I'm basically stuck here. The firmware update is either corrupt or was interrupted but I doubt that. I have no idea what to do. I read the Sticky on the WRT54GS not being able to detect the router with a certain firmware, i downloaded that version of the firmware, but i can't even access the firmware update page on the site. please help
thanks in advance

I have the same issue as KanMan in respect to the exact router and firmware acting weird. Whenever I log in to the 192.168.1.1 it just loads the startup screen, but when I tab over to wireless or any other tab, it gives me an error to display page. Oh well, thanks for the great how-to guide, I learned how to quickly update the firmware through another method than the GUI on the router webpage. Thanks :] I hope to find a fix soon. .More Details: The Linksys logo wont load, I can only get to the main router webscreen through Firefox, does not even prompt me in Internet Explorer, Disabled all Firewalls, Anti-Virus, etc etc.

Hp Laserjet CP3525 Firmware update failure

I was trying to update the firmware on an HP color Laserjet CP3525 using a USB connection using the instructions that were posted on the HP website for the Firmware upgrade. It looked like everything was going well, but when the printer rebooted it never gets past the 6/6 screen on the LED screen. I have left the printer in this condtion for several hours and it never gets past this area. I'm assuming that the Firmware upgrade caused the printer to do a hard crash and is not recoverable, but I'm hoping that someone might be able to help get this back up and working. Any assistance would be greatly appreciated.
This question was solved.
View Solution.

Well, in general if the firmware update was interrupted for any reason it would lead to this. This could be caused on the computer side (restarting/logging out/ending the process before it is complete) or in the cord that you are connected with if it is damaged in any way or not properly secured in the USB ports. I am sorry that you are in this situation, I understand that in a situation with limited spending caps you would have legitimate concerns about updating your other machines.
If you have any further questions or issues myself or one of my colleagues are on this forum almost 24/7.
I hope you have a wonderful rest of the week, Bob!
-Spencer

FIRMWARE UPDATE FAILURE. DISKWRITE ERROR

Similar Messages

Maybe you are looking for