Firmware Update for E71s from E-Plus Germany

Dear all,
I was wondering why the firmware update for the Nokia E71 has been out and about for quite some time, but there is still no update available for my E71 which I have bought from the German provider E-Plus. It has no branding nor any visible other customizations for E-Plus. It's product code: 0569284.
Any date for the firmware update?
Thanks.
-Franz

No it isn´t a fraud, the product code only tells you about the software branding (not all software brandings are equally aggressive) and doesn´t automatically means that is has to have operator logos all over the place...
For more information on that have a look at this.
Probably the phone you bought was bought from e-plus in some way. Did it come with a e-plus contract?
By clicking the "Kudos!" or the "Solution?" button on the right you can say "Thank You" and you´ll show the author and others that the post is useful.
The day we stop improving is the day we stop being good.

Similar Messages

Any news on firmware update for e71 on 3 uk?

as title?
really starting to get annoying.
thanks.

Here is a kind fo wish list for Updates for the Universal Dock and Remote:
1. Menu button functionality for iPod through the remote.
2. A similar "Front Row" experience for iPod, when connected to a television, which would allow you to access music, picture, or movie menus on the screen. Or, at least replicate the iPod display on your television.
3. Remote controll functionality when a Universal Dock is connected to your Mac. I do not see why this could not happen. You have an infrared remote and a reciever connected to your Mac, why not take advantage of it? I think that this would be a great way to get Front Row to function on other Macs besides the new iMac. Or at least allow the remote controll to access and controll iTunes.
4. Firewire for the 5G iPods. This is more of a hardware issue. I do not understand the lack of firewire support, but I won't get into that here. If is not possible place firewire support inside the new iPods becuase of design constraints, then make a new Universal Dock that somehow will allow firewire support to the new iPods.
Sorry, Stephen for this odd post, but I did not know where else to post this.
Is there a place that I may go to make suggestions to Apple?

Is there any way to get firmware update for my DVD-RW Drive from Ultra 40?

Hi, I have Sun Ultra 40 Workstation which comes with Matshita DVD-RAM drive.
While I do enjoy working on my U40 workstation, its DVD-RAM drive is wll pretty bad.
It just fails to burn DVD/CD-R/RW media too often.
Yes, I got it serviced, but it's just the same.
So my final hope is to get the latest firmware, becuase latest firmware often solves such media compatability issues.
Mine has D100 firmware and I find other people who has the same drive on different system have D101, D200, D201 firmware.
So does anyone know how to contact Sun to get the latest firmware for my DVD-RAM drive?
I did contacted Matshita for this matter and they tell me to contact Sun. But I cannot even find email address for Sun Support or any. sigh...
Thanks.
Sang

Hello Sang,
I have Sun Ultra 40 Workstation which comes with Matshita DVD-RAM drive.
Mine has D100 firmware and I find other people who has the same drive on different system have D101, D200, D201 firmware.
So does anyone know how to contact Sun to get the latest firmware for my DVD-RAM drive?
I did contacted Matshita for this matter and they tell me to contact Sun.
I did review the Full Components List for the Ultra 40. The only DVD drives listed (Part No. 370-7970) are Panasonic UJ-485 and Teac DV-W28SLA-093. Both aren't capable of reading or writing DVD-RAM.
In some countries Panasonic uses Matshita as brand name.
I did a search on SunSolve with the keywords DVD firmware.
Sun supplies only firmware updates for two DVD readers: Toshiba DVD 1401 (fixes: unable to boot from Solaris 8 DVD) and Toshiba SD-C2732 (fixes: returns incorrect data).
I was unable to update the firmware of the SD-C2732 (Sun part) with the Sun patch. The drive was attached to an Ultra 10 (with an adapter). I ended attaching the drive to a PC and using a DOS boot floppy with the Toshiba flash program and the Sun firmware.
Regarding you problems with the drive: Have you tried another brand of media. The Ultra 40 is under warranty (GA date was February 14, 2006).
Use the contact information from your other thread.
If you search the net for firmware you can locate sites that offers region-code-free firmware for several drives. Usually they provide a flash program (requires creation of a DOS boot floppy). Using these programs/firmware voids your warranty. Maybe you can not revert the firmware upgrade.
These slimline drives have no jumpers, the installed firmware (of the drive) determines if the drive is master, slave, uses cable-select (CS) or reversed CS.
Michael

Firmware update for e6

hi, my firmware update for e6 doesnt wanna connect. Any time i try checking for updates. It tells me server not responding. And i saw an option where server profiles can be created. Need help and advice. Thanks

I've just upgraded a few weeks ago from a Nokia E71 to a Nokia E6-00.
I've had 3 no. E71 over last 3 years and without doubt, one of the best nokia phones I've had.
Having used the E6-00 for 2 weeks now, I'm reasonably happy but there are a few annoying features:
1. Normally my phone is locked, i.e. timed to lock after 5 mins. When a call comes in, I can answer the phone but I cannot place it in loudspeaker mode !!. Until I unlock it, which takes a few moments while I tell the person to hold on.
I try to minimise the use of the phone to my ear and use loudspeaker 90% of the time.
It would be great if nokia in the next update to allow to place the call in loudspeaker mode from a locked and answered call state. i.e. provide a loudspeaker button from the locked screen.
2. The email send & recieve is sketchy, works sometimes, doesn't work most times and when downloading the email content, takes forever just for text content !!, when downloading an attachment...go and have dinner before its ready.
Email on the E6-00 is configured to get email from a pop email server.
3. The left and right bottom screen buttons (i.e. (Options and Menu) are not configurable anymore like they were in the E71. I liked to have them as Clock and Log.
4. Battery life is not as good as the E71 but thats just an observation, not expecting miracles here, however, it is still better than most smart phones ... but just not as good as the old E71.
5. Web browser could be better, although way faster than
Overall, though, I think it will be the right move from my trusted E71, provided the loudspeaker problem in 1 above is sorted.
Best Regards,
dcphone

Firmware update for HP OfficeJet Pro 8000 wireless to fix load paper issue - as for the 8500?

Is there any hope that that soon will be a firmware update to fix the issues loading paper and the printheads for the HP OfficeJet Pro 8000 wireless printer?
A month or two ago there came a firmware update to the HP OfficeJet Pro 8500 wireless, which has some of the same issues,
and allegedly should have the much of the same load-mechanism as the 8000 printer.
It would be great, as we are on the fourth (4) replacement of this HP 8000 printer. For example, it would be great if we could use normal (80g) paper and not has to use (HP) 90g paper, as this prevents us from using the duplexer and only print on one side.

Thanks for the advice to contact HP tech support!
I have tried in multiple ways since November 2009 to contact HP, when I got the first (of 4) printers. The first 3 printers was subsequently replaced.
Finally in late June 2010 I got the message that there was coming an firmware update for Windows, but not for Mac's. The firmware should improve among other things the paper pick up (load paper issue) and the print-heads life.
I have applied the Windows firmware on the printer from a pc, but still seems to have load-paper issues, even using HP Bright White paper, when printing from Mac's. I have not tested the printing from a pc, but assumes that a firmware upgrade the printer, and are not specific to a certain OS.

Where do I get an SMC Firmware Update for my 21.5 inch Late 2009 iMac?

Hello Apple Support Communities,
I have a 21.5 inch, Late 2009 Intel iMac. Currently it is running OSX Lion. It is also running Bootcamp with Windows 7 Professional Installed. Recently the Hard drive crashed on me and I ordered a new generic Hitachi from an Apple Reseller. I took all the precautions and asked all the questions, but when I finished the hard drive replacement, the fans within the iMac started running on High. The other people in my office Hate this. I did some research and found that there is a firmware update for the SMC that I should be installing. I looked on the webpage where apple directs you to find out if you need this update, but I can't find my exact specs on the page (here is the page for reference: http://support.apple.com/kb/HT1237) I can only find an update for the 27 inch model. I tried running that one and the system tells me "This software is not supported on your system."
Here are the specs that the page requested me to find:
Model Identifier:          iMac10,1
Boot ROM Version:          IM101.00CC.B00
SMC Version (system):          1.52f9
Someone please help, this has been bugging me for a while.

I took all the precautions and asked all the questions,
Then I trust you saw this before you did the replacement. Apparently, it's not just a question of getting a drive from the same manufacturer to use with the proprietary cable.
http://blog.macsales.com/2751-proprietary-cable-can-put-the-brakes-on-upgrading- late-09-imacs
It's acting as if the temp sensor is not connected. I have it bookmarked amidst thousands of bookmarks but can't remember the name right now. There is some program out there that, in the absence of getting data from the internal sensor, will regulate the fan speed based on the SMART temp. If I think of it, I'll post back.
Here it is. It's meant for the 2011 iMac Apple drives, but I don't see why it wouldn't work in your situation.
http://www.hddfancontrol.com/
BTW, I think John Galt is thinking of the 2011 iMac drives, not the late 2009s, which are not quite as impossible.

Firmware Update for my blackberry 8830 world edition with Bell Canada

Hi does anyone know if there is firmware update for the Blackberry 8830 world edition with the carrier being Bell Canada? I am running version 4.2 and I know there is 4.5 but I am not sure if this applies the my phone with Bell Canada. When I boot up my desktop manager and checks for updates and says that there is no update. I don't want to update if it is not necessary and not be able to run my blackberry. If I am able to update where would I go to get the 4.5 update?

You have to repair Desk Manager or unintall and reintall DM, but this time uncheck "Auto update" and anything that refer to "update" the reason why I mention that is because everythime you run DM, it goes online and check for newer version and put this file "vendor.xml" in the Blackberry Common Folder, and with that file in place, it will block the program from installing the newer version from a difference cell company..
From what I see 4.2 is the only version that is up to date for a 8830...but if you have a 8820, you can update to 4.5.

How to run a firmware update for buffalo tech NAS

I downloaded a firmware updater for a Mac to run the install of a firmware update to a Buffalo Tech NAS LinkStation. Mavericks tells me it can't run this because it is from an unidentifed developer. Nice.. I need a workaround if that is possible.

Here you go:
http://support.apple.com/kb/PH14369

M20 firmware update for wps vulnerability

Can someone advise when Cisco will be releasing a firmware update for the Valet M20 router to address the WPS vulnerability problem (e.g. disable the feature, something which *should* have been incorporated into the router in the first place).
Thanks.

Cisco... does not care... about Valet people.
The most recent firmware was released in the 1920's, I believe. It's common practice in the technology sector as a whole to consider electronics as "legacy" devices after about 6 months to a year. Wish DD-WRT ran on this, your configuration choices are pretty much SSID, router's IP and the ability to enable or disable DHCP. Compared to open source firmwares like DD-WRT and Tomato... or even compared to other router firmwares (D-Link firmwares give a lot more control and access to advanced configuration settings-- if you can handle it). I think it's pretty clear that the intended market focus for these routers were... the users who... did not plug the power cord into the router because it said it was "wireless".
Uh oh, did I say that out loud? No... I typed it, though.
The hilarious thing about this is I work as a systems/network admin and have 20 years of experience... and this router gave me trouble when I just decided to be lazy and try setting it up using WPS and the setup program. What a disaster! I finally just did a hard reset and logged in via browser and did it the real way... but I found that extremely amusing, that by dumbing things down so much, it actually made the process (to me, at least) 10x more complicated!
Oh... I threw this one in place of my normal router because it has been acting really flaky lately... it has served its time and paid its dues, surely. I picked up the M20 on clearance for like $10 I think-- for this very purpose... to keep as a backup in my closet if my normal router decided to kick the bucket.
I'm online, so... I guess this Valet M20 is serving its purpose but the lack of configurability is just plain painful! You know what would be a great idea? For Linksys/Cisco to supply an alternative "advanced user" firmware that isn't concerned with giving users enough rope to hang themselves with. People like me and other users who know what they're doing will already know how to flash it and get going-- don't even bother with user guides and pleasantries. Not needed. Also not needed? The splitting headache that swap gave me. A "5-minute task" became a "45-minute chore". I did install the iPhone admin app and found it to be just as watered down.
It seems an odd thing to me that you'd add the option to totally change the SSID or password (something that would require you to update the configuration on all of your wireless clients), yet left out access to things that would be much more practical and useful from a smartphone-- like being able to view the logs-- I would actually find that very useful. I already know that it's a Valet M20. Could have skipped that. Now, being able to reboot the router without having to get up and go to the computer or have to go to the web admin page on my phone, strain to find that option on a page only coded for desktop display... that's useful. The guest enable/disable would be useful, too... if there were any guests here. For some reason, I can't get anyone to hang out... LOL. Ok, rant is finished, I was just testing the connection and ended up here after getting the latest firmware. Thought I'd take a moment to share my thoughts since I'm biding my time, waiting on someone at the moment. This post is an artifact and memorium of the time killed typing it up. Yeah, that's sort of a self-referencing, paradox-ish type thought, hmm. Ok, hah. Really leaving now...

Firmware update for Proteus 2000

Anybody know where I can get hold of the firmware update for the Proteus 2000? It seems all information about those devices has been surgically removed from the emu microsite... doesn't bode well for other products... frankie

Hi,
You might want to write to Customer Support and request for the firmware update.

Firmware Update for WAG200G to fix Security Hole

Hello,
I use a Linksys WAG200G with firmware version 1.01.09, and recently became aware that this particular model has a publicly known exploitable backdoor (See: http://www.businessinsider.com/cisco-warns-about-security-hole-2014-1 for more info).
Has this security hole been fixed? If yes, where can I download an update for it?
Thanks for your time,
Sam

Thanks for the advice to contact HP tech support!
I have tried in multiple ways since November 2009 to contact HP, when I got the first (of 4) printers. The first 3 printers was subsequently replaced.
Finally in late June 2010 I got the message that there was coming an firmware update for Windows, but not for Mac's. The firmware should improve among other things the paper pick up (load paper issue) and the print-heads life.
I have applied the Windows firmware on the printer from a pc, but still seems to have load-paper issues, even using HP Bright White paper, when printing from Mac's. I have not tested the printing from a pc, but assumes that a firmware upgrade the printer, and are not specific to a certain OS.

Sonnet firmware update for OS X

Here's instructions I received from Sonnet on how to do the Sonnet firmware update for OS X (you don't need to boot in OS 9.2). Worked for me. Installed Sonnet Encore/ST 1.8Ghz on a G4 350 AGP system.
Note: you still need to have 4.2.8f1 firmware prior to the patch.
+Sonnet doesn't actually provide instructions on how to use the OS X software. Follow the directions below and I imagine you'll not have any problems.+
+MAC OS X USERS—Install Sonnet Firmware Patch+
+This section describes the installation of software required to support the Encore ZIF, Encore ST or ST Duet G4 in your computer. Please note you MUST run the Sonnet Firmware Updater before you install this upgrade card. If you do not run the updater, your computer will not operate with the processor upgrade installed.+
+1. Insert the Sonnet Installer CD into the CD-ROM drive. Double-click the Sonnet Install CD icon. When the Sonnet Install CD window appears, double-click the Mac OS X ONLY folder.+
+2. Double-click the Sonnet Firmware Updater icon; Mac OS X’s built-in Install program will launch. Follow the onscreen directions to complete the installation of the Sonnet Firmware Updater and Sonnet Firmware Remover applications to your Applications folder.+
+3. Shut down your computer.+
+4. Press and hold the programmer's button until you hear a long tone; release the button when you hear the tone. Note: programmer's button is the little tiny pinhole on the front of a Quicksilver.+
+4a. For QuickSilver 2002: While holding the programmer's button, press and hold the 'start-up' button on the front of the Mac. When the Mac starts up, release the start-up button. Continue to hold the programmer's button and when you hear a long tone, release it.+
+5. Once the startup process is complete and you have logged in (if necessary), go the Finder and select Go > Applications from the Apple menu.+
+6. Locate Sonnet Firmware Updater, and then double-click its icon to launch the application.+
+7. When the Sonnet Firmware Updater window appears, click OK.+
+8. When the Authenticate window appears, enter the Administrator password, and then click OK.+
+9. When the Wait message appears, DO NOT CLICK OK; just wait. Clicking the OK button will cause the application to quit. After the Wait message disappears, another message will appear indicating that the ROM is being patched. Do not turn the power off; this process may take several minutes.+
+10. When the message stating that the ROM has been patched appears, click OK. Shut down your computer; you may now install the Encore ZIF, Encore ST or ST Duet processor upgrade card.+
+Support Note: After updating your system’s firmware with the Sonnet firmware installer, you do not need to install the other software located in the Mac OS X ONLY folder on the Sonnet Installer CD; that software is used for other processor upgrade cards by Sonnet.+

Coming in late on this discussion, but I just discovered this post in a search for an answer to my problem getting a Sonnet Encore ST 1 GHz processor to work in my G4. No disk came with my processor, however I have downloaded the firmware patch and cache enabler from Sonnet's website.
The problem is the processor installs and after a cuda reset will boot. However after some time the computer shuts dow and on restart all I get is a blank screen. Light comes on front of the G4 and fans as if it is searching for a boot disk, but the screen is blank- no signal from the computer. Replaced the original processor and it boots normally.
I don't think the patch ever installed properly. Any thoughts on this will be greatly appreciated.

Firmware Update for ST3250310AS 3.AHA for Windows 8 OS

I want Firmware Update for ST3250310AS 3.AHA.I am using Windows 8.1.This is to remove the false warning about the imminent failure of my hard disk

Here are some firmware files posted by an enthusiast:
http://files.hddguru.com/download/PC-3000-UDMA%20Support/Seagate/Barracuda%207200.10%20NHawk%20Plus/
These come with no warranty from me or anyone else but what do you have to lose?
Good luck

Firmware update for officejet x64 could not find printer

The firmware update for officejet x64 could not find printer. Printer is on wireless network.

Hi,
The firmware update utility does not support wireless connection, it only allow updating the firmware via USB as written on its installation instructions:
The HP OfficeJet 4620 series printer Firmware flashing (upgrade) requires a wired network or a USB connection.
DO NOT upgrade the printer firmware in a wirelessly connected printer.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-104396-5&cc=us&dlc=en&lc=en&os=4063&productOid=5101234&sw_lang=
Try updating the firmware wirelessly as following:
On your computer open the HP Officejet 4620 software and click the Printer Home Page (EWS) option.
From the displayed EWS page open teh Web Services tab, then click on Product Update and follow the steps on screen (enable Web Services if it disabled)
Follow the steps on screen to update the printer.
If the process fails, temporary connect a USB to the printer and then launch teh firmware update utility once again.
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

How do i install firmware updates for time capsule?

How do I install firmware updates for time capsule?

If you are using the Lion or Mountain Lion operating system on your Mac.....
Open Macintosh HD > Applications > Utilities > AirPort Utility
Click on the Time Capsule icon
A message will be displayed if there are any available updates. Click to update if that is the case.
If you are using the Leopard or Snow Leopard operating system......
Open Macintosh HD > Applications > Utilities > AirPort Utility
Click on the Time Capsule icon, the click Manual Setup
Click on the word Version (3rd line on the page) and any available updates will be displayed. Click on Update to proceed.

Firmware Update for E71s from E-Plus Germany

Similar Messages

Maybe you are looking for